[PATCH v3 0/1] dwc2: Enable USB when booted in ACPI mode

[PATCH v3 0/1] dwc2: Enable USB when booted in ACPI mode

[Jeremy Linton]

The BCM2711 has a designware USB controller that is commonly used
on the CM4 and RPi400. There is a desire to use thes machines with
a standard UEFI+ACPI stack as is being done with the normal RPi4.

This patch enables this by adding ACPI module boilerplate to the
existing dwc2 controller.

It should also be noted, that there is an ACPI table update
in the firmware which marks the ACPI _DMA() entries as
ResourceProducers. That change is required for this to work with
the 1G DMA translation present on the platform.

Changes:

  v2->v3: Add this cover letter to describe the patch changes
  
  v1->v2: Fix the kernel_ulong_t/set_parms() function typecasting
          warning by explicitly doing the type cast.

Jeremy Linton (1):
  usb: dwc2: Enable RPi in ACPI mode

 drivers/usb/dwc2/core.h     |  2 ++
 drivers/usb/dwc2/params.c   | 18 +++++++++++++++++-
 drivers/usb/dwc2/platform.c |  1 +
 3 files changed, 20 insertions(+), 1 deletion(-)

-- 
2.29.2

[PATCH v3 1/1] usb: dwc2: Enable RPi in ACPI mode

[Jeremy Linton]

The dwc2 driver has everything we need to run
in ACPI mode except for the ACPI module device table
boilerplate. With that added and identified as "BCM2848",
an id in use by other OSs for this device, the dw2
controller on the BCM2711 will work.

Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
---
 drivers/usb/dwc2/core.h     |  2 ++
 drivers/usb/dwc2/params.c   | 18 +++++++++++++++++-
 drivers/usb/dwc2/platform.c |  1 +
 3 files changed, 20 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
index 7161344c6522..defc6034af49 100644
--- a/drivers/usb/dwc2/core.h
+++ b/drivers/usb/dwc2/core.h
@@ -38,6 +38,7 @@
 #ifndef __DWC2_CORE_H__
 #define __DWC2_CORE_H__
 
+#include <linux/acpi.h>
 #include <linux/phy/phy.h>
 #include <linux/regulator/consumer.h>
 #include <linux/usb/gadget.h>
@@ -1339,6 +1340,7 @@ irqreturn_t dwc2_handle_common_intr(int irq, void *dev);
 
 /* The device ID match table */
 extern const struct of_device_id dwc2_of_match_table[];
+extern const struct acpi_device_id dwc2_acpi_match[];
 
 int dwc2_lowlevel_hw_enable(struct dwc2_hsotg *hsotg);
 int dwc2_lowlevel_hw_disable(struct dwc2_hsotg *hsotg);
diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c
index 92df3d620f7d..7a6089fa81e1 100644
--- a/drivers/usb/dwc2/params.c
+++ b/drivers/usb/dwc2/params.c
@@ -232,6 +232,12 @@ const struct of_device_id dwc2_of_match_table[] = {
 };
 MODULE_DEVICE_TABLE(of, dwc2_of_match_table);
 
+const struct acpi_device_id dwc2_acpi_match[] = {
+	{ "BCM2848", (kernel_ulong_t)dwc2_set_bcm_params },
+	{ },
+};
+MODULE_DEVICE_TABLE(acpi, dwc2_acpi_match);
+
 static void dwc2_set_param_otg_cap(struct dwc2_hsotg *hsotg)
 {
 	u8 val;
@@ -866,10 +872,12 @@ int dwc2_get_hwparams(struct dwc2_hsotg *hsotg)
 	return 0;
 }
 
+typedef void (*set_params_cb)(struct dwc2_hsotg *data);
+
 int dwc2_init_params(struct dwc2_hsotg *hsotg)
 {
 	const struct of_device_id *match;
-	void (*set_params)(struct dwc2_hsotg *data);
+	set_params_cb set_params;
 
 	dwc2_set_default_params(hsotg);
 	dwc2_get_device_properties(hsotg);
@@ -878,6 +886,14 @@ int dwc2_init_params(struct dwc2_hsotg *hsotg)
 	if (match && match->data) {
 		set_params = match->data;
 		set_params(hsotg);
+	} else {
+		const struct acpi_device_id *amatch;
+
+		amatch = acpi_match_device(dwc2_acpi_match, hsotg->dev);
+		if (amatch && amatch->driver_data) {
+			set_params = (set_params_cb)amatch->driver_data;
+			set_params(hsotg);
+		}
 	}
 
 	dwc2_check_params(hsotg);
diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c
index 5f18acac7406..53fc6bc3ed1a 100644
--- a/drivers/usb/dwc2/platform.c
+++ b/drivers/usb/dwc2/platform.c
@@ -734,6 +734,7 @@ static struct platform_driver dwc2_platform_driver = {
 	.driver = {
 		.name = dwc2_driver_name,
 		.of_match_table = dwc2_of_match_table,
+		.acpi_match_table = ACPI_PTR(dwc2_acpi_match),
 		.pm = &dwc2_dev_pm_ops,
 	},
 	.probe = dwc2_driver_probe,
-- 
2.29.2