[PATCH AUTOSEL 5.12 10/79] usb: gadget: uvc: add bInterval checking for HS mode

[PATCH AUTOSEL 5.12 10/79] usb: gadget: uvc: add bInterval checking for HS mode

[Sasha Levin]

From: Pawel Laszczak <pawell@cadence.com>

[ Upstream commit 26adde04acdff14a1f28d4a5dce46a8513a3038b ]

Patch adds extra checking for bInterval passed by configfs.
The 5.6.4 chapter of USB Specification (rev. 2.0) say:
"A high-bandwidth endpoint must specify a period of 1x125 µs
(i.e., a bInterval value of 1)."

The issue was observed during testing UVC class on CV.
I treat this change as improvement because we can control
bInterval by configfs.

Reviewed-by: Peter Chen <peter.chen@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Link: https://lore.kernel.org/r/20210308125338.4824-1-pawell@gli-login.cadence.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/gadget/function/f_uvc.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/gadget/function/f_uvc.c b/drivers/usb/gadget/function/f_uvc.c
index 44b4352a2676..ed77a126a74f 100644
--- a/drivers/usb/gadget/function/f_uvc.c
+++ b/drivers/usb/gadget/function/f_uvc.c
@@ -633,7 +633,12 @@ uvc_function_bind(struct usb_configuration *c, struct usb_function *f)
 
 	uvc_hs_streaming_ep.wMaxPacketSize =
 		cpu_to_le16(max_packet_size | ((max_packet_mult - 1) << 11));
-	uvc_hs_streaming_ep.bInterval = opts->streaming_interval;
+
+	/* A high-bandwidth endpoint must specify a bInterval value of 1 */
+	if (max_packet_mult > 1)
+		uvc_hs_streaming_ep.bInterval = 1;
+	else
+		uvc_hs_streaming_ep.bInterval = opts->streaming_interval;
 
 	uvc_ss_streaming_ep.wMaxPacketSize = cpu_to_le16(max_packet_size);
 	uvc_ss_streaming_ep.bInterval = opts->streaming_interval;
-- 
2.30.2

[PATCH AUTOSEL 5.12 11/79] usb: webcam: Invalid size of Processing Unit Descriptor

[Sasha Levin]

From: Pawel Laszczak <pawell@cadence.com>

[ Upstream commit 6a154ec9ef6762c774cd2b50215c7a8f0f08a862 ]

According with USB Device Class Definition for Video Device the
Processing Unit Descriptor bLength should be 12 (10 + bmControlSize),
but it has 11.

Invalid length caused that Processing Unit Descriptor Test Video form
CV tool failed. To fix this issue patch adds bmVideoStandards into
uvc_processing_unit_descriptor structure.

The bmVideoStandards field was added in UVC 1.1 and it wasn't part of
UVC 1.0a.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Reviewed-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/20210315071748.29706-1-pawell@gli-login.cadence.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/gadget/function/f_uvc.c | 1 +
 drivers/usb/gadget/legacy/webcam.c  | 1 +
 include/uapi/linux/usb/video.h      | 3 ++-
 3 files changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/gadget/function/f_uvc.c b/drivers/usb/gadget/function/f_uvc.c
index ed77a126a74f..f48a00e49794 100644
--- a/drivers/usb/gadget/function/f_uvc.c
+++ b/drivers/usb/gadget/function/f_uvc.c
@@ -822,6 +822,7 @@ static struct usb_function_instance *uvc_alloc_inst(void)
 	pd->bmControls[0]		= 1;
 	pd->bmControls[1]		= 0;
 	pd->iProcessing			= 0;
+	pd->bmVideoStandards		= 0;
 
 	od = &opts->uvc_output_terminal;
 	od->bLength			= UVC_DT_OUTPUT_TERMINAL_SIZE;
diff --git a/drivers/usb/gadget/legacy/webcam.c b/drivers/usb/gadget/legacy/webcam.c
index a9f8eb8e1c76..2c9eab2b863d 100644
--- a/drivers/usb/gadget/legacy/webcam.c
+++ b/drivers/usb/gadget/legacy/webcam.c
@@ -125,6 +125,7 @@ static const struct uvc_processing_unit_descriptor uvc_processing = {
 	.bmControls[0]		= 1,
 	.bmControls[1]		= 0,
 	.iProcessing		= 0,
+	.bmVideoStandards	= 0,
 };
 
 static const struct uvc_output_terminal_descriptor uvc_output_terminal = {
diff --git a/include/uapi/linux/usb/video.h b/include/uapi/linux/usb/video.h
index d854cb19c42c..bfdae12cdacf 100644
--- a/include/uapi/linux/usb/video.h
+++ b/include/uapi/linux/usb/video.h
@@ -302,9 +302,10 @@ struct uvc_processing_unit_descriptor {
 	__u8   bControlSize;
 	__u8   bmControls[2];
 	__u8   iProcessing;
+	__u8   bmVideoStandards;
 } __attribute__((__packed__));
 
-#define UVC_DT_PROCESSING_UNIT_SIZE(n)			(9+(n))
+#define UVC_DT_PROCESSING_UNIT_SIZE(n)			(10+(n))
 
 /* 3.7.2.6. Extension Unit Descriptor */
 struct uvc_extension_unit_descriptor {
-- 
2.30.2

[PATCH AUTOSEL 5.12 16/79] usb: dwc3: gadget: Remove invalid low-speed setting

[Sasha Levin]

From: Thinh Nguyen <Thinh.Nguyen@synopsys.com>

[ Upstream commit 0c59f678fcfc6dd53ba493915794636a230bc4cc ]

None of the DWC_usb3x IPs (and all their versions) supports low-speed
setting in device mode. In the early days, our "Early Adopter Edition"
DWC_usb3 databook shows that the controller may be configured to operate
in low-speed, but it was revised on release. Let's remove this invalid
speed setting to avoid any confusion.

Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/258b1c7fbb966454f4c4c2c1367508998498fc30.1615509438.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/dwc3/core.c   | 1 -
 drivers/usb/dwc3/core.h   | 2 --
 drivers/usb/dwc3/gadget.c | 8 --------
 3 files changed, 11 deletions(-)

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index f2448d0a9d39..677a9778c49a 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -1385,7 +1385,6 @@ static void dwc3_check_params(struct dwc3 *dwc)
 
 	/* Check the maximum_speed parameter */
 	switch (dwc->maximum_speed) {
-	case USB_SPEED_LOW:
 	case USB_SPEED_FULL:
 	case USB_SPEED_HIGH:
 		break;
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 052b20d52651..19ffab828d9c 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -396,7 +396,6 @@
 #define DWC3_DCFG_SUPERSPEED	(4 << 0)
 #define DWC3_DCFG_HIGHSPEED	(0 << 0)
 #define DWC3_DCFG_FULLSPEED	BIT(0)
-#define DWC3_DCFG_LOWSPEED	(2 << 0)
 
 #define DWC3_DCFG_NUMP_SHIFT	17
 #define DWC3_DCFG_NUMP(n)	(((n) >> DWC3_DCFG_NUMP_SHIFT) & 0x1f)
@@ -490,7 +489,6 @@
 #define DWC3_DSTS_SUPERSPEED		(4 << 0)
 #define DWC3_DSTS_HIGHSPEED		(0 << 0)
 #define DWC3_DSTS_FULLSPEED		BIT(0)
-#define DWC3_DSTS_LOWSPEED		(2 << 0)
 
 /* Device Generic Command Register */
 #define DWC3_DGCMD_SET_LMP		0x01
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index c7ef218e7a8c..04950ac0704b 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -2113,9 +2113,6 @@ static void __dwc3_gadget_set_speed(struct dwc3 *dwc)
 		reg |= DWC3_DCFG_SUPERSPEED;
 	} else {
 		switch (speed) {
-		case USB_SPEED_LOW:
-			reg |= DWC3_DCFG_LOWSPEED;
-			break;
 		case USB_SPEED_FULL:
 			reg |= DWC3_DCFG_FULLSPEED;
 			break;
@@ -3448,11 +3445,6 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc)
 		dwc->gadget->ep0->maxpacket = 64;
 		dwc->gadget->speed = USB_SPEED_FULL;
 		break;
-	case DWC3_DSTS_LOWSPEED:
-		dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(8);
-		dwc->gadget->ep0->maxpacket = 8;
-		dwc->gadget->speed = USB_SPEED_LOW;
-		break;
 	}
 
 	dwc->eps[1]->endpoint.maxpacket = dwc->gadget->ep0->maxpacket;
-- 
2.30.2

Re: [PATCH AUTOSEL 5.12 16/79] usb: dwc3: gadget: Remove invalid low-speed setting

[Greg Kroah-Hartman]

On Sun, May 02, 2021 at 10:02:13AM -0400, Sasha Levin wrote:
> From: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
> 
> [ Upstream commit 0c59f678fcfc6dd53ba493915794636a230bc4cc ]
> 
> None of the DWC_usb3x IPs (and all their versions) supports low-speed
> setting in device mode. In the early days, our "Early Adopter Edition"
> DWC_usb3 databook shows that the controller may be configured to operate
> in low-speed, but it was revised on release. Let's remove this invalid
> speed setting to avoid any confusion.
> 
> Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
> Link: https://lore.kernel.org/r/258b1c7fbb966454f4c4c2c1367508998498fc30.1615509438.git.Thinh.Nguyen@synopsys.com
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Signed-off-by: Sasha Levin <sashal@kernel.org>
> ---
>  drivers/usb/dwc3/core.c   | 1 -
>  drivers/usb/dwc3/core.h   | 2 --
>  drivers/usb/dwc3/gadget.c | 8 --------
>  3 files changed, 11 deletions(-)

This is a "cleanup only" and does not fix or solve anything, so it can
be dropped from all of the kernels it has been "autoselected" for.

thanks,

greg k-h

Re: [PATCH AUTOSEL 5.12 16/79] usb: dwc3: gadget: Remove invalid low-speed setting

[Sasha Levin]

On Sun, May 02, 2021 at 04:56:11PM +0200, Greg Kroah-Hartman wrote:
>On Sun, May 02, 2021 at 10:02:13AM -0400, Sasha Levin wrote:
>> From: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
>>
>> [ Upstream commit 0c59f678fcfc6dd53ba493915794636a230bc4cc ]
>>
>> None of the DWC_usb3x IPs (and all their versions) supports low-speed
>> setting in device mode. In the early days, our "Early Adopter Edition"
>> DWC_usb3 databook shows that the controller may be configured to operate
>> in low-speed, but it was revised on release. Let's remove this invalid
>> speed setting to avoid any confusion.
>>
>> Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
>> Link: https://lore.kernel.org/r/258b1c7fbb966454f4c4c2c1367508998498fc30.1615509438.git.Thinh.Nguyen@synopsys.com
>> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
>> Signed-off-by: Sasha Levin <sashal@kernel.org>
>> ---
>>  drivers/usb/dwc3/core.c   | 1 -
>>  drivers/usb/dwc3/core.h   | 2 --
>>  drivers/usb/dwc3/gadget.c | 8 --------
>>  3 files changed, 11 deletions(-)
>
>This is a "cleanup only" and does not fix or solve anything, so it can
>be dropped from all of the kernels it has been "autoselected" for.

Dropped, thanks!

-- 
Thanks,
Sasha

[PATCH AUTOSEL 5.12 17/79] usb: gadget: f_uac2: validate input parameters

[Sasha Levin]

From: Ruslan Bilovol <ruslan.bilovol@gmail.com>

[ Upstream commit 3713d5ceb04d5ab6a5e2b86dfca49170053f3a5e ]

Currently user can configure UAC2 function with
parameters that violate UAC2 spec or are not supported
by UAC2 gadget implementation.

This can lead to incorrect behavior if such gadget
is connected to the host - like enumeration failure
or other issues depending on host's UAC2 driver
implementation, bringing user to a long hours
of debugging the issue.

Instead of silently accept these parameters, throw
an error if they are not valid.

Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com>
Link: https://lore.kernel.org/r/1614599375-8803-4-git-send-email-ruslan.bilovol@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/gadget/function/f_uac2.c | 39 ++++++++++++++++++++++++++--
 1 file changed, 37 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/gadget/function/f_uac2.c b/drivers/usb/gadget/function/f_uac2.c
index 6f03e944e0e3..dd960cea642f 100644
--- a/drivers/usb/gadget/function/f_uac2.c
+++ b/drivers/usb/gadget/function/f_uac2.c
@@ -14,6 +14,9 @@
 #include "u_audio.h"
 #include "u_uac2.h"
 
+/* UAC2 spec: 4.1 Audio Channel Cluster Descriptor */
+#define UAC2_CHANNEL_MASK 0x07FFFFFF
+
 /*
  * The driver implements a simple UAC_2 topology.
  * USB-OUT -> IT_1 -> OT_3 -> ALSA_Capture
@@ -604,6 +607,36 @@ static void setup_descriptor(struct f_uac2_opts *opts)
 	hs_audio_desc[i] = NULL;
 }
 
+static int afunc_validate_opts(struct g_audio *agdev, struct device *dev)
+{
+	struct f_uac2_opts *opts = g_audio_to_uac2_opts(agdev);
+
+	if (!opts->p_chmask && !opts->c_chmask) {
+		dev_err(dev, "Error: no playback and capture channels\n");
+		return -EINVAL;
+	} else if (opts->p_chmask & ~UAC2_CHANNEL_MASK) {
+		dev_err(dev, "Error: unsupported playback channels mask\n");
+		return -EINVAL;
+	} else if (opts->c_chmask & ~UAC2_CHANNEL_MASK) {
+		dev_err(dev, "Error: unsupported capture channels mask\n");
+		return -EINVAL;
+	} else if ((opts->p_ssize < 1) || (opts->p_ssize > 4)) {
+		dev_err(dev, "Error: incorrect playback sample size\n");
+		return -EINVAL;
+	} else if ((opts->c_ssize < 1) || (opts->c_ssize > 4)) {
+		dev_err(dev, "Error: incorrect capture sample size\n");
+		return -EINVAL;
+	} else if (!opts->p_srate) {
+		dev_err(dev, "Error: incorrect playback sampling rate\n");
+		return -EINVAL;
+	} else if (!opts->c_srate) {
+		dev_err(dev, "Error: incorrect capture sampling rate\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
 static int
 afunc_bind(struct usb_configuration *cfg, struct usb_function *fn)
 {
@@ -612,11 +645,13 @@ afunc_bind(struct usb_configuration *cfg, struct usb_function *fn)
 	struct usb_composite_dev *cdev = cfg->cdev;
 	struct usb_gadget *gadget = cdev->gadget;
 	struct device *dev = &gadget->dev;
-	struct f_uac2_opts *uac2_opts;
+	struct f_uac2_opts *uac2_opts = g_audio_to_uac2_opts(agdev);
 	struct usb_string *us;
 	int ret;
 
-	uac2_opts = container_of(fn->fi, struct f_uac2_opts, func_inst);
+	ret = afunc_validate_opts(agdev, dev);
+	if (ret)
+		return ret;
 
 	us = usb_gstrings_attach(cdev, fn_strings, ARRAY_SIZE(strings_fn));
 	if (IS_ERR(us))
-- 
2.30.2

[PATCH AUTOSEL 5.12 18/79] usb: gadget: f_uac1: validate input parameters

[Sasha Levin]

From: Ruslan Bilovol <ruslan.bilovol@gmail.com>

[ Upstream commit a59c68a6a3d1b18e2494f526eb19893a34fa6ec6 ]

Currently user can configure UAC1 function with
parameters that violate UAC1 spec or are not supported
by UAC1 gadget implementation.

This can lead to incorrect behavior if such gadget
is connected to the host - like enumeration failure
or other issues depending on host's UAC1 driver
implementation, bringing user to a long hours
of debugging the issue.

Instead of silently accept these parameters, throw
an error if they are not valid.

Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com>
Link: https://lore.kernel.org/r/1614599375-8803-5-git-send-email-ruslan.bilovol@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/gadget/function/f_uac1.c | 43 ++++++++++++++++++++++++++++
 1 file changed, 43 insertions(+)

diff --git a/drivers/usb/gadget/function/f_uac1.c b/drivers/usb/gadget/function/f_uac1.c
index 560382e0a8f3..e65f474ad7b3 100644
--- a/drivers/usb/gadget/function/f_uac1.c
+++ b/drivers/usb/gadget/function/f_uac1.c
@@ -19,6 +19,9 @@
 #include "u_audio.h"
 #include "u_uac1.h"
 
+/* UAC1 spec: 3.7.2.3 Audio Channel Cluster Format */
+#define UAC1_CHANNEL_MASK 0x0FFF
+
 struct f_uac1 {
 	struct g_audio g_audio;
 	u8 ac_intf, as_in_intf, as_out_intf;
@@ -30,6 +33,11 @@ static inline struct f_uac1 *func_to_uac1(struct usb_function *f)
 	return container_of(f, struct f_uac1, g_audio.func);
 }
 
+static inline struct f_uac1_opts *g_audio_to_uac1_opts(struct g_audio *audio)
+{
+	return container_of(audio->func.fi, struct f_uac1_opts, func_inst);
+}
+
 /*
  * DESCRIPTORS ... most are static, but strings and full
  * configuration descriptors are built on demand.
@@ -505,11 +513,42 @@ static void f_audio_disable(struct usb_function *f)
 
 /*-------------------------------------------------------------------------*/
 
+static int f_audio_validate_opts(struct g_audio *audio, struct device *dev)
+{
+	struct f_uac1_opts *opts = g_audio_to_uac1_opts(audio);
+
+	if (!opts->p_chmask && !opts->c_chmask) {
+		dev_err(dev, "Error: no playback and capture channels\n");
+		return -EINVAL;
+	} else if (opts->p_chmask & ~UAC1_CHANNEL_MASK) {
+		dev_err(dev, "Error: unsupported playback channels mask\n");
+		return -EINVAL;
+	} else if (opts->c_chmask & ~UAC1_CHANNEL_MASK) {
+		dev_err(dev, "Error: unsupported capture channels mask\n");
+		return -EINVAL;
+	} else if ((opts->p_ssize < 1) || (opts->p_ssize > 4)) {
+		dev_err(dev, "Error: incorrect playback sample size\n");
+		return -EINVAL;
+	} else if ((opts->c_ssize < 1) || (opts->c_ssize > 4)) {
+		dev_err(dev, "Error: incorrect capture sample size\n");
+		return -EINVAL;
+	} else if (!opts->p_srate) {
+		dev_err(dev, "Error: incorrect playback sampling rate\n");
+		return -EINVAL;
+	} else if (!opts->c_srate) {
+		dev_err(dev, "Error: incorrect capture sampling rate\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
 /* audio function driver setup/binding */
 static int f_audio_bind(struct usb_configuration *c, struct usb_function *f)
 {
 	struct usb_composite_dev	*cdev = c->cdev;
 	struct usb_gadget		*gadget = cdev->gadget;
+	struct device			*dev = &gadget->dev;
 	struct f_uac1			*uac1 = func_to_uac1(f);
 	struct g_audio			*audio = func_to_g_audio(f);
 	struct f_uac1_opts		*audio_opts;
@@ -519,6 +558,10 @@ static int f_audio_bind(struct usb_configuration *c, struct usb_function *f)
 	int				rate;
 	int				status;
 
+	status = f_audio_validate_opts(audio, dev);
+	if (status)
+		return status;
+
 	audio_opts = container_of(f->fi, struct f_uac1_opts, func_inst);
 
 	us = usb_gstrings_attach(cdev, uac1_strings, ARRAY_SIZE(strings_uac1));
-- 
2.30.2

[PATCH AUTOSEL 5.12 19/79] usb: dwc3: gadget: Ignore EP queue requests during bus reset

[Sasha Levin]

From: Wesley Cheng <wcheng@codeaurora.org>

[ Upstream commit 71ca43f30df9c642970f9dc9b2d6f463f4967e7b ]

The current dwc3_gadget_reset_interrupt() will stop any active
transfers, but only addresses blocking of EP queuing for while we are
coming from a disconnected scenario, i.e. after receiving the disconnect
event.  If the host decides to issue a bus reset on the device, the
connected parameter will still be set to true, allowing for EP queuing
to continue while we are disabling the functions.  To avoid this, set the
connected flag to false until the stop active transfers is complete.

Signed-off-by: Wesley Cheng <wcheng@codeaurora.org>
Link: https://lore.kernel.org/r/1616146285-19149-3-git-send-email-wcheng@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/dwc3/gadget.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 04950ac0704b..73f4ce63f4b2 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -3319,6 +3319,15 @@ static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc)
 {
 	u32			reg;
 
+	/*
+	 * Ideally, dwc3_reset_gadget() would trigger the function
+	 * drivers to stop any active transfers through ep disable.
+	 * However, for functions which defer ep disable, such as mass
+	 * storage, we will need to rely on the call to stop active
+	 * transfers here, and avoid allowing of request queuing.
+	 */
+	dwc->connected = false;
+
 	/*
 	 * WORKAROUND: DWC3 revisions <1.88a have an issue which
 	 * would cause a missing Disconnect Event if there's a
-- 
2.30.2

[PATCH AUTOSEL 5.12 20/79] usb: xhci: Fix port minor revision

[Sasha Levin]

From: Thinh Nguyen <Thinh.Nguyen@synopsys.com>

[ Upstream commit 64364bc912c01b33bba6c22e3ccb849bfca96398 ]

Some hosts incorrectly use sub-minor version for minor version (i.e.
0x02 instead of 0x20 for bcdUSB 0x320 and 0x01 for bcdUSB 0x310).
Currently the xHCI driver works around this by just checking for minor
revision > 0x01 for USB 3.1 everywhere. With the addition of USB 3.2,
checking this gets a bit cumbersome. Since there is no USB release with
bcdUSB 0x301 to 0x309, we can assume that sub-minor version 01 to 09 is
incorrect. Let's try to fix this and use the minor revision that matches
with the USB/xHCI spec to help with the version checking within the
driver.

Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/ed330e95a19dc367819c5b4d78bf7a541c35aa0a.1615432770.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/host/xhci-mem.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index f2c4ee7c4786..3708432f5f69 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -2129,6 +2129,15 @@ static void xhci_add_in_port(struct xhci_hcd *xhci, unsigned int num_ports,
 
 	if (major_revision == 0x03) {
 		rhub = &xhci->usb3_rhub;
+		/*
+		 * Some hosts incorrectly use sub-minor version for minor
+		 * version (i.e. 0x02 instead of 0x20 for bcdUSB 0x320 and 0x01
+		 * for bcdUSB 0x310). Since there is no USB release with sub
+		 * minor version 0x301 to 0x309, we can assume that they are
+		 * incorrect and fix it here.
+		 */
+		if (minor_revision > 0x00 && minor_revision < 0x10)
+			minor_revision <<= 4;
 	} else if (major_revision <= 0x02) {
 		rhub = &xhci->usb2_rhub;
 	} else {
-- 
2.30.2