[PATCH AUTOSEL 4.19 03/21] usb: gadget: uvc: add bInterval checking for HS mode

[PATCH AUTOSEL 4.19 03/21] usb: gadget: uvc: add bInterval checking for HS mode

[Sasha Levin]

From: Pawel Laszczak <pawell@cadence.com>

[ Upstream commit 26adde04acdff14a1f28d4a5dce46a8513a3038b ]

Patch adds extra checking for bInterval passed by configfs.
The 5.6.4 chapter of USB Specification (rev. 2.0) say:
"A high-bandwidth endpoint must specify a period of 1x125 µs
(i.e., a bInterval value of 1)."

The issue was observed during testing UVC class on CV.
I treat this change as improvement because we can control
bInterval by configfs.

Reviewed-by: Peter Chen <peter.chen@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Link: https://lore.kernel.org/r/20210308125338.4824-1-pawell@gli-login.cadence.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/gadget/function/f_uvc.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/gadget/function/f_uvc.c b/drivers/usb/gadget/function/f_uvc.c
index d8ce7868fe22..169e73ed128c 100644
--- a/drivers/usb/gadget/function/f_uvc.c
+++ b/drivers/usb/gadget/function/f_uvc.c
@@ -645,7 +645,12 @@ uvc_function_bind(struct usb_configuration *c, struct usb_function *f)
 
 	uvc_hs_streaming_ep.wMaxPacketSize =
 		cpu_to_le16(max_packet_size | ((max_packet_mult - 1) << 11));
-	uvc_hs_streaming_ep.bInterval = opts->streaming_interval;
+
+	/* A high-bandwidth endpoint must specify a bInterval value of 1 */
+	if (max_packet_mult > 1)
+		uvc_hs_streaming_ep.bInterval = 1;
+	else
+		uvc_hs_streaming_ep.bInterval = opts->streaming_interval;
 
 	uvc_ss_streaming_ep.wMaxPacketSize = cpu_to_le16(max_packet_size);
 	uvc_ss_streaming_ep.bInterval = opts->streaming_interval;
-- 
2.30.2

[PATCH AUTOSEL 4.19 05/21] usb: gadget: f_uac1: validate input parameters

[Sasha Levin]

From: Ruslan Bilovol <ruslan.bilovol@gmail.com>

[ Upstream commit a59c68a6a3d1b18e2494f526eb19893a34fa6ec6 ]

Currently user can configure UAC1 function with
parameters that violate UAC1 spec or are not supported
by UAC1 gadget implementation.

This can lead to incorrect behavior if such gadget
is connected to the host - like enumeration failure
or other issues depending on host's UAC1 driver
implementation, bringing user to a long hours
of debugging the issue.

Instead of silently accept these parameters, throw
an error if they are not valid.

Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com>
Link: https://lore.kernel.org/r/1614599375-8803-5-git-send-email-ruslan.bilovol@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/gadget/function/f_uac1.c | 43 ++++++++++++++++++++++++++++
 1 file changed, 43 insertions(+)

diff --git a/drivers/usb/gadget/function/f_uac1.c b/drivers/usb/gadget/function/f_uac1.c
index a215c836eba4..41e7b29f58df 100644
--- a/drivers/usb/gadget/function/f_uac1.c
+++ b/drivers/usb/gadget/function/f_uac1.c
@@ -19,6 +19,9 @@
 #include "u_audio.h"
 #include "u_uac1.h"
 
+/* UAC1 spec: 3.7.2.3 Audio Channel Cluster Format */
+#define UAC1_CHANNEL_MASK 0x0FFF
+
 struct f_uac1 {
 	struct g_audio g_audio;
 	u8 ac_intf, as_in_intf, as_out_intf;
@@ -30,6 +33,11 @@ static inline struct f_uac1 *func_to_uac1(struct usb_function *f)
 	return container_of(f, struct f_uac1, g_audio.func);
 }
 
+static inline struct f_uac1_opts *g_audio_to_uac1_opts(struct g_audio *audio)
+{
+	return container_of(audio->func.fi, struct f_uac1_opts, func_inst);
+}
+
 /*
  * DESCRIPTORS ... most are static, but strings and full
  * configuration descriptors are built on demand.
@@ -505,11 +513,42 @@ static void f_audio_disable(struct usb_function *f)
 
 /*-------------------------------------------------------------------------*/
 
+static int f_audio_validate_opts(struct g_audio *audio, struct device *dev)
+{
+	struct f_uac1_opts *opts = g_audio_to_uac1_opts(audio);
+
+	if (!opts->p_chmask && !opts->c_chmask) {
+		dev_err(dev, "Error: no playback and capture channels\n");
+		return -EINVAL;
+	} else if (opts->p_chmask & ~UAC1_CHANNEL_MASK) {
+		dev_err(dev, "Error: unsupported playback channels mask\n");
+		return -EINVAL;
+	} else if (opts->c_chmask & ~UAC1_CHANNEL_MASK) {
+		dev_err(dev, "Error: unsupported capture channels mask\n");
+		return -EINVAL;
+	} else if ((opts->p_ssize < 1) || (opts->p_ssize > 4)) {
+		dev_err(dev, "Error: incorrect playback sample size\n");
+		return -EINVAL;
+	} else if ((opts->c_ssize < 1) || (opts->c_ssize > 4)) {
+		dev_err(dev, "Error: incorrect capture sample size\n");
+		return -EINVAL;
+	} else if (!opts->p_srate) {
+		dev_err(dev, "Error: incorrect playback sampling rate\n");
+		return -EINVAL;
+	} else if (!opts->c_srate) {
+		dev_err(dev, "Error: incorrect capture sampling rate\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
 /* audio function driver setup/binding */
 static int f_audio_bind(struct usb_configuration *c, struct usb_function *f)
 {
 	struct usb_composite_dev	*cdev = c->cdev;
 	struct usb_gadget		*gadget = cdev->gadget;
+	struct device			*dev = &gadget->dev;
 	struct f_uac1			*uac1 = func_to_uac1(f);
 	struct g_audio			*audio = func_to_g_audio(f);
 	struct f_uac1_opts		*audio_opts;
@@ -519,6 +558,10 @@ static int f_audio_bind(struct usb_configuration *c, struct usb_function *f)
 	int				rate;
 	int				status;
 
+	status = f_audio_validate_opts(audio, dev);
+	if (status)
+		return status;
+
 	audio_opts = container_of(f->fi, struct f_uac1_opts, func_inst);
 
 	us = usb_gstrings_attach(cdev, uac1_strings, ARRAY_SIZE(strings_uac1));
-- 
2.30.2

[PATCH AUTOSEL 4.19 06/21] usb: dwc3: gadget: Ignore EP queue requests during bus reset

[Sasha Levin]

From: Wesley Cheng <wcheng@codeaurora.org>

[ Upstream commit 71ca43f30df9c642970f9dc9b2d6f463f4967e7b ]

The current dwc3_gadget_reset_interrupt() will stop any active
transfers, but only addresses blocking of EP queuing for while we are
coming from a disconnected scenario, i.e. after receiving the disconnect
event.  If the host decides to issue a bus reset on the device, the
connected parameter will still be set to true, allowing for EP queuing
to continue while we are disabling the functions.  To avoid this, set the
connected flag to false until the stop active transfers is complete.

Signed-off-by: Wesley Cheng <wcheng@codeaurora.org>
Link: https://lore.kernel.org/r/1616146285-19149-3-git-send-email-wcheng@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/dwc3/gadget.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index a0806dca3de9..f28eb541fad3 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -2717,6 +2717,15 @@ static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc)
 
 	dwc->connected = true;
 
+	/*
+	 * Ideally, dwc3_reset_gadget() would trigger the function
+	 * drivers to stop any active transfers through ep disable.
+	 * However, for functions which defer ep disable, such as mass
+	 * storage, we will need to rely on the call to stop active
+	 * transfers here, and avoid allowing of request queuing.
+	 */
+	dwc->connected = false;
+
 	/*
 	 * WORKAROUND: DWC3 revisions <1.88a have an issue which
 	 * would cause a missing Disconnect Event if there's a
-- 
2.30.2

[PATCH AUTOSEL 4.19 07/21] usb: xhci: Fix port minor revision

[Sasha Levin]

From: Thinh Nguyen <Thinh.Nguyen@synopsys.com>

[ Upstream commit 64364bc912c01b33bba6c22e3ccb849bfca96398 ]

Some hosts incorrectly use sub-minor version for minor version (i.e.
0x02 instead of 0x20 for bcdUSB 0x320 and 0x01 for bcdUSB 0x310).
Currently the xHCI driver works around this by just checking for minor
revision > 0x01 for USB 3.1 everywhere. With the addition of USB 3.2,
checking this gets a bit cumbersome. Since there is no USB release with
bcdUSB 0x301 to 0x309, we can assume that sub-minor version 01 to 09 is
incorrect. Let's try to fix this and use the minor revision that matches
with the USB/xHCI spec to help with the version checking within the
driver.

Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/ed330e95a19dc367819c5b4d78bf7a541c35aa0a.1615432770.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/host/xhci-mem.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 9e87c282a743..2461be2a8748 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -2134,6 +2134,15 @@ static void xhci_add_in_port(struct xhci_hcd *xhci, unsigned int num_ports,
 
 	if (major_revision == 0x03) {
 		rhub = &xhci->usb3_rhub;
+		/*
+		 * Some hosts incorrectly use sub-minor version for minor
+		 * version (i.e. 0x02 instead of 0x20 for bcdUSB 0x320 and 0x01
+		 * for bcdUSB 0x310). Since there is no USB release with sub
+		 * minor version 0x301 to 0x309, we can assume that they are
+		 * incorrect and fix it here.
+		 */
+		if (minor_revision > 0x00 && minor_revision < 0x10)
+			minor_revision <<= 4;
 	} else if (major_revision <= 0x02) {
 		rhub = &xhci->usb2_rhub;
 	} else {
-- 
2.30.2

[PATCH AUTOSEL 4.19 12/21] usb: xhci-mtk: support quirk to disable usb2 lpm

[Sasha Levin]

From: Chunfeng Yun <chunfeng.yun@mediatek.com>

[ Upstream commit bee1f89aad2a51cd3339571bc8eadbb0dc88a683 ]

The xHCI driver support usb2 HW LPM by default, here add support
XHCI_HW_LPM_DISABLE quirk, then we can disable usb2 lpm when
need it.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1617181553-3503-4-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/host/xhci-mtk.c | 3 +++
 drivers/usb/host/xhci-mtk.h | 1 +
 2 files changed, 4 insertions(+)

diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c
index 09d5a789fcd5..f4b2e766f195 100644
--- a/drivers/usb/host/xhci-mtk.c
+++ b/drivers/usb/host/xhci-mtk.c
@@ -395,6 +395,8 @@ static void xhci_mtk_quirks(struct device *dev, struct xhci_hcd *xhci)
 	xhci->quirks |= XHCI_SPURIOUS_SUCCESS;
 	if (mtk->lpm_support)
 		xhci->quirks |= XHCI_LPM_SUPPORT;
+	if (mtk->u2_lpm_disable)
+		xhci->quirks |= XHCI_HW_LPM_DISABLE;
 
 	/*
 	 * MTK xHCI 0.96: PSA is 1 by default even if doesn't support stream,
@@ -467,6 +469,7 @@ static int xhci_mtk_probe(struct platform_device *pdev)
 		return ret;
 
 	mtk->lpm_support = of_property_read_bool(node, "usb3-lpm-capable");
+	mtk->u2_lpm_disable = of_property_read_bool(node, "usb2-lpm-disable");
 	/* optional property, ignore the error if it does not exist */
 	of_property_read_u32(node, "mediatek,u3p-dis-msk",
 			     &mtk->u3p_dis_msk);
diff --git a/drivers/usb/host/xhci-mtk.h b/drivers/usb/host/xhci-mtk.h
index cc59d80b663b..1601ca9a388e 100644
--- a/drivers/usb/host/xhci-mtk.h
+++ b/drivers/usb/host/xhci-mtk.h
@@ -123,6 +123,7 @@ struct xhci_hcd_mtk {
 	struct phy **phys;
 	int num_phys;
 	bool lpm_support;
+	bool u2_lpm_disable;
 	/* usb remote wakeup */
 	bool uwk_en;
 	struct regmap *uwk;
-- 
2.30.2

[PATCH AUTOSEL 4.19 13/21] xhci: check control context is valid before dereferencing it.

[Sasha Levin]

From: Mathias Nyman <mathias.nyman@linux.intel.com>

[ Upstream commit 597899d2f7c5619c87185ee7953d004bd37fd0eb ]

Don't dereference ctrl_ctx before checking it's valid.
Issue reported by Klockwork

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20210406070208.3406266-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/host/xhci.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 6c508d0313f7..fc07d68fdd15 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -3148,6 +3148,14 @@ static void xhci_endpoint_reset(struct usb_hcd *hcd,
 
 	/* config ep command clears toggle if add and drop ep flags are set */
 	ctrl_ctx = xhci_get_input_control_ctx(cfg_cmd->in_ctx);
+	if (!ctrl_ctx) {
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		xhci_free_command(xhci, cfg_cmd);
+		xhci_warn(xhci, "%s: Could not get input context, bad type.\n",
+				__func__);
+		goto cleanup;
+	}
+
 	xhci_setup_input_ctx_for_config_ep(xhci, cfg_cmd->in_ctx, vdev->out_ctx,
 					   ctrl_ctx, ep_flag, ep_flag);
 	xhci_endpoint_copy(xhci, cfg_cmd->in_ctx, vdev->out_ctx, ep_index);
-- 
2.30.2

[PATCH AUTOSEL 4.19 14/21] xhci: fix potential array out of bounds with several interrupters

[Sasha Levin]

From: Mathias Nyman <mathias.nyman@linux.intel.com>

[ Upstream commit 286fd02fd54b6acab65809549cf5fb3f2a886696 ]

The Max Interrupters supported by the controller is given in a 10bit
wide bitfield, but the driver uses a fixed 128 size array to index these
interrupters.

Klockwork reports a possible array out of bounds case which in theory
is possible. In practice this hasn't been hit as a common number of Max
Interrupters for new controllers is 8, not even close to 128.

This needs to be fixed anyway

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20210406070208.3406266-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/host/xhci.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index fc07d68fdd15..9ca59f3fffde 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -227,6 +227,7 @@ static void xhci_zero_64b_regs(struct xhci_hcd *xhci)
 	struct device *dev = xhci_to_hcd(xhci)->self.sysdev;
 	int err, i;
 	u64 val;
+	u32 intrs;
 
 	/*
 	 * Some Renesas controllers get into a weird state if they are
@@ -265,7 +266,10 @@ static void xhci_zero_64b_regs(struct xhci_hcd *xhci)
 	if (upper_32_bits(val))
 		xhci_write_64(xhci, 0, &xhci->op_regs->cmd_ring);
 
-	for (i = 0; i < HCS_MAX_INTRS(xhci->hcs_params1); i++) {
+	intrs = min_t(u32, HCS_MAX_INTRS(xhci->hcs_params1),
+		      ARRAY_SIZE(xhci->run_regs->ir_set));
+
+	for (i = 0; i < intrs; i++) {
 		struct xhci_intr_reg __iomem *ir;
 
 		ir = &xhci->run_regs->ir_set[i];
-- 
2.30.2

Re: [PATCH AUTOSEL 4.19 06/21] usb: dwc3: gadget: Ignore EP queue requests during bus reset

[Pavel Machek]

[-- Attachment #1: Type: text/plain, Size: 1639 bytes --]

Hi!

> [ Upstream commit 71ca43f30df9c642970f9dc9b2d6f463f4967e7b ]
> 
> The current dwc3_gadget_reset_interrupt() will stop any active
> transfers, but only addresses blocking of EP queuing for while we are
> coming from a disconnected scenario, i.e. after receiving the disconnect
> event.  If the host decides to issue a bus reset on the device, the
> connected parameter will still be set to true, allowing for EP queuing
> to continue while we are disabling the functions.  To avoid this, set the
> connected flag to false until the stop active transfers is complete.

This is mismerged / crazy. Will probably break the driver completely.


> +++ b/drivers/usb/dwc3/gadget.c
> @@ -2717,6 +2717,15 @@ static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc)
>  
>  	dwc->connected = true;
>  
> +	/*
> +	 * Ideally, dwc3_reset_gadget() would trigger the function
> +	 * drivers to stop any active transfers through ep disable.
> +	 * However, for functions which defer ep disable, such as mass
> +	 * storage, we will need to rely on the call to stop active
> +	 * transfers here, and avoid allowing of request queuing.
> +	 */
> +	dwc->connected = false;
> +
>  	/*
>  	 * WORKAROUND: DWC3 revisions <1.88a have an issue which
>  	 * would cause a missing Disconnect Event if there's a

See how connected = true is immediately overwritten? In mainline
= true assignment is done below, so it does not have this problem.

Best regards,
								Pavel
-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 195 bytes --]