linux-usb.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Rui Miguel Silva <rui.silva@linaro.org>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Sebastian Siewior <bigeasy@linutronix.de>,
	Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	Rob Herring <robh+dt@kernel.org>
Cc: linux-usb@vger.kernel.org, devicetree@vger.kernel.org,
	Rui Miguel Silva <rui.silva@linaro.org>
Subject: [PATCH 3/7] usb: isp1760: hcd: refactor mempool config and setup
Date: Tue,  4 May 2021 11:19:06 +0100	[thread overview]
Message-ID: <20210504101910.18619-4-rui.silva@linaro.org> (raw)
In-Reply-To: <20210504101910.18619-1-rui.silva@linaro.org>

In preparation to support other family member IP, which may have
different memory layout. Drop macros and setup a configuration
struct.

Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
---
 drivers/usb/isp1760/isp1760-core.c | 21 ++++++++
 drivers/usb/isp1760/isp1760-hcd.c  | 83 ++++++++++++++++++++----------
 drivers/usb/isp1760/isp1760-hcd.h  | 37 ++++++-------
 3 files changed, 92 insertions(+), 49 deletions(-)

diff --git a/drivers/usb/isp1760/isp1760-core.c b/drivers/usb/isp1760/isp1760-core.c
index f78e637d3b9a..2f16adbc7624 100644
--- a/drivers/usb/isp1760/isp1760-core.c
+++ b/drivers/usb/isp1760/isp1760-core.c
@@ -100,6 +100,25 @@ void isp1760_set_pullup(struct isp1760_device *isp, bool enable)
 		isp1760_field_set(udc->fields, HW_DP_PULLUP_CLEAR);
 }
 
+/*
+ * 60kb divided in:
+ * - 32 blocks @ 256  bytes
+ * - 20 blocks @ 1024 bytes
+ * -  4 blocks @ 8192 bytes
+ */
+static const struct isp1760_memory_layout isp176x_memory_conf = {
+	.blocks[0]		= 32,
+	.blocks_size[0]		= 256,
+	.blocks[1]		= 20,
+	.blocks_size[1]		= 1024,
+	.blocks[2]		= 4,
+	.blocks_size[2]		= 8192,
+
+	.ptd_num		= 32,
+	.payload_blocks		= 32 + 20 + 4,
+	.payload_area_size	= 0xf000,
+};
+
 static struct regmap_config isp1760_hc_regmap_conf = {
 	.name = "isp1760-hc",
 	.reg_bits = 16,
@@ -186,6 +205,8 @@ int isp1760_register(struct resource *mem, int irq, unsigned long irqflags,
 		udc->fields[i] = f;
 	}
 
+	hcd->memory_layout = &isp176x_memory_conf;
+
 	isp1760_init_core(isp);
 
 	if (IS_ENABLED(CONFIG_USB_ISP1760_HCD) && !usb_disabled()) {
diff --git a/drivers/usb/isp1760/isp1760-hcd.c b/drivers/usb/isp1760/isp1760-hcd.c
index 0601b1a4bd42..147ca437fc55 100644
--- a/drivers/usb/isp1760/isp1760-hcd.c
+++ b/drivers/usb/isp1760/isp1760-hcd.c
@@ -355,39 +355,29 @@ static void ptd_write(void __iomem *base, u32 ptd_offset, u32 slot,
 /* memory management of the 60kb on the chip from 0x1000 to 0xffff */
 static void init_memory(struct isp1760_hcd *priv)
 {
-	int i, curr;
+	const struct isp1760_memory_layout *mem = priv->memory_layout;
+	int i, j, curr;
 	u32 payload_addr;
 
 	payload_addr = PAYLOAD_OFFSET;
-	for (i = 0; i < BLOCK_1_NUM; i++) {
-		priv->memory_pool[i].start = payload_addr;
-		priv->memory_pool[i].size = BLOCK_1_SIZE;
-		priv->memory_pool[i].free = 1;
-		payload_addr += priv->memory_pool[i].size;
-	}
-
-	curr = i;
-	for (i = 0; i < BLOCK_2_NUM; i++) {
-		priv->memory_pool[curr + i].start = payload_addr;
-		priv->memory_pool[curr + i].size = BLOCK_2_SIZE;
-		priv->memory_pool[curr + i].free = 1;
-		payload_addr += priv->memory_pool[curr + i].size;
-	}
 
-	curr = i;
-	for (i = 0; i < BLOCK_3_NUM; i++) {
-		priv->memory_pool[curr + i].start = payload_addr;
-		priv->memory_pool[curr + i].size = BLOCK_3_SIZE;
-		priv->memory_pool[curr + i].free = 1;
-		payload_addr += priv->memory_pool[curr + i].size;
+	for (i = 0, curr = 0; i < ARRAY_SIZE(mem->blocks); i++) {
+		for (j = 0; j < mem->blocks[i]; j++, curr++) {
+			priv->memory_pool[curr + j].start = payload_addr;
+			priv->memory_pool[curr + j].size = mem->blocks_size[i];
+			priv->memory_pool[curr + j].free = 1;
+			payload_addr += priv->memory_pool[curr + j].size;
+		}
 	}
 
-	WARN_ON(payload_addr - priv->memory_pool[0].start > PAYLOAD_AREA_SIZE);
+	WARN_ON(payload_addr - priv->memory_pool[0].start >
+		mem->payload_area_size);
 }
 
 static void alloc_mem(struct usb_hcd *hcd, struct isp1760_qtd *qtd)
 {
 	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+	const struct isp1760_memory_layout *mem = priv->memory_layout;
 	int i;
 
 	WARN_ON(qtd->payload_addr);
@@ -395,7 +385,7 @@ static void alloc_mem(struct usb_hcd *hcd, struct isp1760_qtd *qtd)
 	if (!qtd->length)
 		return;
 
-	for (i = 0; i < BLOCKS; i++) {
+	for (i = 0; i < mem->payload_blocks; i++) {
 		if (priv->memory_pool[i].size >= qtd->length &&
 				priv->memory_pool[i].free) {
 			priv->memory_pool[i].free = 0;
@@ -408,12 +398,13 @@ static void alloc_mem(struct usb_hcd *hcd, struct isp1760_qtd *qtd)
 static void free_mem(struct usb_hcd *hcd, struct isp1760_qtd *qtd)
 {
 	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+	const struct isp1760_memory_layout *mem = priv->memory_layout;
 	int i;
 
 	if (!qtd->payload_addr)
 		return;
 
-	for (i = 0; i < BLOCKS; i++) {
+	for (i = 0; i < mem->payload_blocks; i++) {
 		if (priv->memory_pool[i].start == qtd->payload_addr) {
 			WARN_ON(priv->memory_pool[i].free);
 			priv->memory_pool[i].free = 1;
@@ -1404,8 +1395,6 @@ static int qtd_fill(struct isp1760_qtd *qtd, void *databuffer, size_t len)
 {
 	qtd->data_buffer = databuffer;
 
-	if (len > MAX_PAYLOAD_SIZE)
-		len = MAX_PAYLOAD_SIZE;
 	qtd->length = len;
 
 	return qtd->length;
@@ -1429,6 +1418,8 @@ static void qtd_list_free(struct list_head *qtd_list)
 static void packetize_urb(struct usb_hcd *hcd,
 		struct urb *urb, struct list_head *head, gfp_t flags)
 {
+	struct isp1760_hcd *priv = hcd_to_priv(hcd);
+	const struct isp1760_memory_layout *mem = priv->memory_layout;
 	struct isp1760_qtd *qtd;
 	void *buf;
 	int len, maxpacketsize;
@@ -1481,6 +1472,10 @@ static void packetize_urb(struct usb_hcd *hcd,
 		qtd = qtd_alloc(flags, urb, packet_type);
 		if (!qtd)
 			goto cleanup;
+
+		if (len > mem->blocks_size[ISP176x_BLOCK_NUM - 1])
+			len = mem->blocks_size[ISP176x_BLOCK_NUM - 1];
+
 		this_qtd_len = qtd_fill(qtd, buf, len);
 		list_add_tail(&qtd->qtd_list, head);
 
@@ -2209,6 +2204,7 @@ int isp1760_hcd_register(struct isp1760_hcd *priv, struct resource *mem,
 			 int irq, unsigned long irqflags,
 			 struct device *dev)
 {
+	const struct isp1760_memory_layout *mem_layout = priv->memory_layout;
 	struct usb_hcd *hcd;
 	int ret;
 
@@ -2220,6 +2216,28 @@ int isp1760_hcd_register(struct isp1760_hcd *priv, struct resource *mem,
 
 	priv->hcd = hcd;
 
+	priv->memory_pool = kcalloc(mem_layout->payload_blocks,
+				    sizeof(struct isp1760_memory_chunk),
+				    GFP_KERNEL);
+	if (!priv->memory_pool) {
+		ret = -ENOMEM;
+		goto put_hcd;
+	}
+
+	priv->atl_slots = kcalloc(mem_layout->ptd_num,
+				  sizeof(struct isp1760_slotinfo), GFP_KERNEL);
+	if (!priv->atl_slots) {
+		ret = -ENOMEM;
+		goto free_mem_pool;
+	}
+
+	priv->int_slots = kcalloc(mem_layout->ptd_num,
+				  sizeof(struct isp1760_slotinfo), GFP_KERNEL);
+	if (!priv->int_slots) {
+		ret = -ENOMEM;
+		goto free_atl_slots;
+	}
+
 	init_memory(priv);
 
 	hcd->irq = irq;
@@ -2231,13 +2249,19 @@ int isp1760_hcd_register(struct isp1760_hcd *priv, struct resource *mem,
 
 	ret = usb_add_hcd(hcd, irq, irqflags);
 	if (ret)
-		goto error;
+		goto free_int_slots;
 
 	device_wakeup_enable(hcd->self.controller);
 
 	return 0;
 
-error:
+free_int_slots:
+	kfree(priv->int_slots);
+free_atl_slots:
+	kfree(priv->atl_slots);
+free_mem_pool:
+	kfree(priv->memory_pool);
+put_hcd:
 	usb_put_hcd(hcd);
 	return ret;
 }
@@ -2249,4 +2273,7 @@ void isp1760_hcd_unregister(struct isp1760_hcd *priv)
 
 	usb_remove_hcd(priv->hcd);
 	usb_put_hcd(priv->hcd);
+	kfree(priv->atl_slots);
+	kfree(priv->int_slots);
+	kfree(priv->memory_pool);
 }
diff --git a/drivers/usb/isp1760/isp1760-hcd.h b/drivers/usb/isp1760/isp1760-hcd.h
index 34e1899e52c4..9d2427ce3f1a 100644
--- a/drivers/usb/isp1760/isp1760-hcd.h
+++ b/drivers/usb/isp1760/isp1760-hcd.h
@@ -12,24 +12,6 @@ struct isp1760_qtd;
 struct resource;
 struct usb_hcd;
 
-/*
- * 60kb divided in:
- * - 32 blocks @ 256  bytes
- * - 20 blocks @ 1024 bytes
- * -  4 blocks @ 8192 bytes
- */
-
-#define BLOCK_1_NUM 32
-#define BLOCK_2_NUM 20
-#define BLOCK_3_NUM 4
-
-#define BLOCK_1_SIZE 256
-#define BLOCK_2_SIZE 1024
-#define BLOCK_3_SIZE 8192
-#define BLOCKS (BLOCK_1_NUM + BLOCK_2_NUM + BLOCK_3_NUM)
-#define MAX_PAYLOAD_SIZE BLOCK_3_SIZE
-#define PAYLOAD_AREA_SIZE 0xf000
-
 struct isp1760_slotinfo {
 	struct isp1760_qh *qh;
 	struct isp1760_qtd *qtd;
@@ -37,6 +19,17 @@ struct isp1760_slotinfo {
 };
 
 /* chip memory management */
+#define ISP176x_BLOCK_NUM 3
+
+struct isp1760_memory_layout {
+	unsigned int blocks[ISP176x_BLOCK_NUM];
+	unsigned int blocks_size[ISP176x_BLOCK_NUM];
+
+	unsigned int ptd_num;
+	unsigned int payload_blocks;
+	unsigned int payload_area_size;
+};
+
 struct isp1760_memory_chunk {
 	unsigned int start;
 	unsigned int size;
@@ -58,12 +51,14 @@ struct isp1760_hcd {
 	struct regmap		*regs;
 	struct regmap_field	*fields[HC_FIELD_MAX];
 
+	const struct isp1760_memory_layout	*memory_layout;
+
 	spinlock_t		lock;
-	struct isp1760_slotinfo	atl_slots[32];
+	struct isp1760_slotinfo	*atl_slots;
 	int			atl_done_map;
-	struct isp1760_slotinfo	int_slots[32];
+	struct isp1760_slotinfo	*int_slots;
 	int			int_done_map;
-	struct isp1760_memory_chunk memory_pool[BLOCKS];
+	struct isp1760_memory_chunk *memory_pool;
 	struct list_head	qh_list[QH_END];
 
 	/* periodic schedule support */
-- 
2.31.1


  parent reply	other threads:[~2021-05-04 10:19 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-04 10:19 [PATCH 0/7] usb: isp1760: extend support for isp1763 Rui Miguel Silva
2021-05-04 10:19 ` [PATCH 1/7] usb: isp1760: move to regmap for register access Rui Miguel Silva
2021-05-06 12:24   ` Laurent Pinchart
2021-05-06 13:39     ` Rui Miguel Silva
2021-05-06 13:45       ` Laurent Pinchart
2021-05-06 14:14         ` Rui Miguel Silva
2021-05-06 14:59           ` Laurent Pinchart
2021-05-06 15:59             ` Rui Miguel Silva
2021-05-04 10:19 ` [PATCH 2/7] usb: isp1760: remove platform data struct and code Rui Miguel Silva
2021-05-04 10:19 ` Rui Miguel Silva [this message]
2021-05-04 10:19 ` [PATCH 4/7] usb: isp1760: use dr_mode binding Rui Miguel Silva
2021-05-04 10:19 ` [PATCH 5/7] usb: isp1760: add support for isp1763 Rui Miguel Silva
2021-05-04 11:53   ` kernel test robot
2021-05-06 16:50   ` kernel test robot
2021-05-04 10:19 ` [PATCH 6/7] dt-bindings: usb: nxp,isp1760: add bindings Rui Miguel Silva
2021-05-04 13:55   ` Rob Herring
2021-05-04 10:19 ` [PATCH 7/7] usb: isp1763: add peripheral mode Rui Miguel Silva
2021-05-06 10:50 ` [PATCH 0/7] usb: isp1760: extend support for isp1763 Greg Kroah-Hartman
2021-05-06 12:25   ` Laurent Pinchart
2021-05-06 13:41     ` Rui Miguel Silva
2021-05-06 14:02       ` Greg Kroah-Hartman
2021-05-06 14:15         ` Rui Miguel Silva
2021-05-06 13:29   ` Rui Miguel Silva
2021-05-06 13:38     ` Laurent Pinchart
2021-05-06 13:53       ` Rui Miguel Silva

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210504101910.18619-4-rui.silva@linaro.org \
    --to=rui.silva@linaro.org \
    --cc=bigeasy@linutronix.de \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-usb@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).