[PATCH 35/54] dt-bindings: usb: dwc3: Fix usb-phy check

[Maxime Ripard <maxime@cerno.tech>]

The original binding was allowing any combination of usb2-phy and
usb3-phy in the phys and phy-names properties.

However, the current binding enforces that those properties must be a
list of usb2-phy and usb3-phy, with exactly one element, effectively
making usb2-phy the only value being valid.

Let's rework the properties description to allow either one or two
element picked with values either usb2-phy or usb3-phy. The rest of the
tooling makes sure that we don't get any duplicate value, so this should
be what we want.

Cc: Felipe Balbi <balbi@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 Documentation/devicetree/bindings/usb/snps,dwc3.yaml | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
index 41416fbd92aa..6c3f7c9a76c0 100644
--- a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
@@ -73,15 +73,15 @@ properties:
 
   phys:
     minItems: 1
-    items:
-      - description: USB2/HS PHY
-      - description: USB3/SS PHY
+    maxItems: 2
 
   phy-names:
     minItems: 1
+    maxItems: 2
     items:
-      - const: usb2-phy
-      - const: usb3-phy
+      enum:
+        - usb2-phy
+        - usb3-phy
 
   resets:
     minItems: 1
-- 
2.31.1