[PATCH v2] usb: musb: musb_dsps: request_irq() after initializing musb

[PATCH v2] usb: musb: musb_dsps: request_irq() after initializing musb

[Nadezda Lutovinova]

If IRQ occurs between calling  dsps_setup_optional_vbus_irq()
and  dsps_create_musb_pdev(), then null pointer dereference occurs
since glue->musb wasn't initialized yet.

The patch puts initializing of neccesery data before registration
of the interrupt handler.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Nadezda Lutovinova <lutovinova@ispras.ru>
---
v2: fix subject
---
 drivers/usb/musb/musb_dsps.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
index 5892f3ce0cdc..ce9fc46c9266 100644
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -890,23 +890,22 @@ static int dsps_probe(struct platform_device *pdev)
 	if (!glue->usbss_base)
 		return -ENXIO;
 
-	if (usb_get_dr_mode(&pdev->dev) == USB_DR_MODE_PERIPHERAL) {
-		ret = dsps_setup_optional_vbus_irq(pdev, glue);
-		if (ret)
-			goto err_iounmap;
-	}
-
 	platform_set_drvdata(pdev, glue);
 	pm_runtime_enable(&pdev->dev);
 	ret = dsps_create_musb_pdev(glue, pdev);
 	if (ret)
 		goto err;
 
+	if (usb_get_dr_mode(&pdev->dev) == USB_DR_MODE_PERIPHERAL) {
+		ret = dsps_setup_optional_vbus_irq(pdev, glue);
+		if (ret)
+			goto err;
+	}
+
 	return 0;
 
 err:
 	pm_runtime_disable(&pdev->dev);
-err_iounmap:
 	iounmap(glue->usbss_base);
 	return ret;
 }
-- 
2.17.1