[PATCH AUTOSEL 5.14 039/252] usb: host: fotg210: fix the endpoint's transactional opportunities calculation

[PATCH AUTOSEL 5.14 039/252] usb: host: fotg210: fix the endpoint's transactional opportunities calculation

[Sasha Levin]

From: Kelly Devilliv <kelly.devilliv@gmail.com>

[ Upstream commit c2e898764245c852bc8ee4857613ba4f3a6d761d ]

Now that usb_endpoint_maxp() only returns the lowest
11 bits from wMaxPacketSize, we should make use of the
usb_endpoint_* helpers instead and remove the unnecessary
max_packet()/hb_mult() macro.

Signed-off-by: Kelly Devilliv <kelly.devilliv@gmail.com>
Link: https://lore.kernel.org/r/20210627125747.127646-3-kelly.devilliv@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/host/fotg210-hcd.c | 36 ++++++++++++++++------------------
 1 file changed, 17 insertions(+), 19 deletions(-)

diff --git a/drivers/usb/host/fotg210-hcd.c b/drivers/usb/host/fotg210-hcd.c
index 05fb8d97cf02..dd29f7b68d6f 100644
--- a/drivers/usb/host/fotg210-hcd.c
+++ b/drivers/usb/host/fotg210-hcd.c
@@ -2510,11 +2510,6 @@ static unsigned qh_completions(struct fotg210_hcd *fotg210,
 	return count;
 }
 
-/* high bandwidth multiplier, as encoded in highspeed endpoint descriptors */
-#define hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03))
-/* ... and packet size, for any kind of endpoint descriptor */
-#define max_packet(wMaxPacketSize) ((wMaxPacketSize) & 0x07ff)
-
 /* reverse of qh_urb_transaction:  free a list of TDs.
  * used for cleanup after errors, before HC sees an URB's TDs.
  */
@@ -2600,7 +2595,7 @@ static struct list_head *qh_urb_transaction(struct fotg210_hcd *fotg210,
 		token |= (1 /* "in" */ << 8);
 	/* else it's already initted to "out" pid (0 << 8) */
 
-	maxpacket = max_packet(usb_maxpacket(urb->dev, urb->pipe, !is_input));
+	maxpacket = usb_maxpacket(urb->dev, urb->pipe, !is_input);
 
 	/*
 	 * buffer gets wrapped in one or more qtds;
@@ -2714,9 +2709,11 @@ static struct fotg210_qh *qh_make(struct fotg210_hcd *fotg210, struct urb *urb,
 		gfp_t flags)
 {
 	struct fotg210_qh *qh = fotg210_qh_alloc(fotg210, flags);
+	struct usb_host_endpoint *ep;
 	u32 info1 = 0, info2 = 0;
 	int is_input, type;
 	int maxp = 0;
+	int mult;
 	struct usb_tt *tt = urb->dev->tt;
 	struct fotg210_qh_hw *hw;
 
@@ -2731,14 +2728,15 @@ static struct fotg210_qh *qh_make(struct fotg210_hcd *fotg210, struct urb *urb,
 
 	is_input = usb_pipein(urb->pipe);
 	type = usb_pipetype(urb->pipe);
-	maxp = usb_maxpacket(urb->dev, urb->pipe, !is_input);
+	ep = usb_pipe_endpoint(urb->dev, urb->pipe);
+	maxp = usb_endpoint_maxp(&ep->desc);
+	mult = usb_endpoint_maxp_mult(&ep->desc);
 
 	/* 1024 byte maxpacket is a hardware ceiling.  High bandwidth
 	 * acts like up to 3KB, but is built from smaller packets.
 	 */
-	if (max_packet(maxp) > 1024) {
-		fotg210_dbg(fotg210, "bogus qh maxpacket %d\n",
-				max_packet(maxp));
+	if (maxp > 1024) {
+		fotg210_dbg(fotg210, "bogus qh maxpacket %d\n", maxp);
 		goto done;
 	}
 
@@ -2752,8 +2750,7 @@ static struct fotg210_qh *qh_make(struct fotg210_hcd *fotg210, struct urb *urb,
 	 */
 	if (type == PIPE_INTERRUPT) {
 		qh->usecs = NS_TO_US(usb_calc_bus_time(USB_SPEED_HIGH,
-				is_input, 0,
-				hb_mult(maxp) * max_packet(maxp)));
+				is_input, 0, mult * maxp));
 		qh->start = NO_FRAME;
 
 		if (urb->dev->speed == USB_SPEED_HIGH) {
@@ -2790,7 +2787,7 @@ static struct fotg210_qh *qh_make(struct fotg210_hcd *fotg210, struct urb *urb,
 			think_time = tt ? tt->think_time : 0;
 			qh->tt_usecs = NS_TO_US(think_time +
 					usb_calc_bus_time(urb->dev->speed,
-					is_input, 0, max_packet(maxp)));
+					is_input, 0, maxp));
 			qh->period = urb->interval;
 			if (qh->period > fotg210->periodic_size) {
 				qh->period = fotg210->periodic_size;
@@ -2853,11 +2850,11 @@ static struct fotg210_qh *qh_make(struct fotg210_hcd *fotg210, struct urb *urb,
 			 * to help them do so.  So now people expect to use
 			 * such nonconformant devices with Linux too; sigh.
 			 */
-			info1 |= max_packet(maxp) << 16;
+			info1 |= maxp << 16;
 			info2 |= (FOTG210_TUNE_MULT_HS << 30);
 		} else {		/* PIPE_INTERRUPT */
-			info1 |= max_packet(maxp) << 16;
-			info2 |= hb_mult(maxp) << 30;
+			info1 |= maxp << 16;
+			info2 |= mult << 30;
 		}
 		break;
 	default:
@@ -3927,6 +3924,7 @@ static void iso_stream_init(struct fotg210_hcd *fotg210,
 	int is_input;
 	long bandwidth;
 	unsigned multi;
+	struct usb_host_endpoint *ep;
 
 	/*
 	 * this might be a "high bandwidth" highspeed endpoint,
@@ -3934,14 +3932,14 @@ static void iso_stream_init(struct fotg210_hcd *fotg210,
 	 */
 	epnum = usb_pipeendpoint(pipe);
 	is_input = usb_pipein(pipe) ? USB_DIR_IN : 0;
-	maxp = usb_maxpacket(dev, pipe, !is_input);
+	ep = usb_pipe_endpoint(dev, pipe);
+	maxp = usb_endpoint_maxp(&ep->desc);
 	if (is_input)
 		buf1 = (1 << 11);
 	else
 		buf1 = 0;
 
-	maxp = max_packet(maxp);
-	multi = hb_mult(maxp);
+	multi = usb_endpoint_maxp_mult(&ep->desc);
 	buf1 |= maxp;
 	maxp *= multi;
 
-- 
2.30.2

[PATCH AUTOSEL 5.14 040/252] usb: host: fotg210: fix the actual_length of an iso packet

[Sasha Levin]

From: Kelly Devilliv <kelly.devilliv@gmail.com>

[ Upstream commit 091cb2f782f32ab68c6f5f326d7868683d3d4875 ]

We should acquire the actual_length of an iso packet
from the iTD directly using FOTG210_ITD_LENGTH() macro.

Signed-off-by: Kelly Devilliv <kelly.devilliv@gmail.com>
Link: https://lore.kernel.org/r/20210627125747.127646-4-kelly.devilliv@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/host/fotg210-hcd.c | 5 ++---
 drivers/usb/host/fotg210.h     | 5 -----
 2 files changed, 2 insertions(+), 8 deletions(-)

diff --git a/drivers/usb/host/fotg210-hcd.c b/drivers/usb/host/fotg210-hcd.c
index dd29f7b68d6f..aeb235ce06c1 100644
--- a/drivers/usb/host/fotg210-hcd.c
+++ b/drivers/usb/host/fotg210-hcd.c
@@ -4460,13 +4460,12 @@ static bool itd_complete(struct fotg210_hcd *fotg210, struct fotg210_itd *itd)
 
 			/* HC need not update length with this error */
 			if (!(t & FOTG210_ISOC_BABBLE)) {
-				desc->actual_length =
-					fotg210_itdlen(urb, desc, t);
+				desc->actual_length = FOTG210_ITD_LENGTH(t);
 				urb->actual_length += desc->actual_length;
 			}
 		} else if (likely((t & FOTG210_ISOC_ACTIVE) == 0)) {
 			desc->status = 0;
-			desc->actual_length = fotg210_itdlen(urb, desc, t);
+			desc->actual_length = FOTG210_ITD_LENGTH(t);
 			urb->actual_length += desc->actual_length;
 		} else {
 			/* URB was too late */
diff --git a/drivers/usb/host/fotg210.h b/drivers/usb/host/fotg210.h
index 0a91061a0551..0781442b7a24 100644
--- a/drivers/usb/host/fotg210.h
+++ b/drivers/usb/host/fotg210.h
@@ -683,11 +683,6 @@ static inline unsigned fotg210_read_frame_index(struct fotg210_hcd *fotg210)
 	return fotg210_readl(fotg210, &fotg210->regs->frame_index);
 }
 
-#define fotg210_itdlen(urb, desc, t) ({			\
-	usb_pipein((urb)->pipe) ?				\
-	(desc)->length - FOTG210_ITD_LENGTH(t) :			\
-	FOTG210_ITD_LENGTH(t);					\
-})
 /*-------------------------------------------------------------------------*/
 
 #endif /* __LINUX_FOTG210_H */
-- 
2.30.2

[PATCH AUTOSEL 5.14 041/252] usb: gadget: u_ether: fix a potential null pointer dereference

[Sasha Levin]

From: Maciej Żenczykowski <maze@google.com>

[ Upstream commit 8ae01239609b29ec2eff55967c8e0fe3650cfa09 ]

f_ncm tx timeout can call us with null skb to flush
a pending frame.  In this case skb is NULL to begin
with but ceases to be null after dev->wrap() completes.

In such a case in->maxpacket will be read, even though
we've failed to check that 'in' is not NULL.

Though I've never observed this fail in practice,
however the 'flush operation' simply does not make sense with
a null usb IN endpoint - there's nowhere to flush to...
(note that we're the gadget/device, and IN is from the point
 of view of the host, so here IN actually means outbound...)

Cc: Brooke Basile <brookebasile@gmail.com>
Cc: "Bryan O'Donoghue" <bryan.odonoghue@linaro.org>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Link: https://lore.kernel.org/r/20210701114834.884597-6-zenczykowski@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/gadget/function/u_ether.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/gadget/function/u_ether.c b/drivers/usb/gadget/function/u_ether.c
index d1d044d9f859..85a3f6d4b5af 100644
--- a/drivers/usb/gadget/function/u_ether.c
+++ b/drivers/usb/gadget/function/u_ether.c
@@ -492,8 +492,9 @@ static netdev_tx_t eth_start_xmit(struct sk_buff *skb,
 	}
 	spin_unlock_irqrestore(&dev->lock, flags);
 
-	if (skb && !in) {
-		dev_kfree_skb_any(skb);
+	if (!in) {
+		if (skb)
+			dev_kfree_skb_any(skb);
 		return NETDEV_TX_OK;
 	}
 
-- 
2.30.2

[PATCH AUTOSEL 5.14 042/252] USB: EHCI: ehci-mv: improve error handling in mv_ehci_enable()

[Sasha Levin]

From: Evgeny Novikov <novikov@ispras.ru>

[ Upstream commit 61136a12cbed234374ec6f588af57c580b20b772 ]

mv_ehci_enable() did not disable and unprepare clocks in case of
failures of phy_init(). Besides, it did not take into account failures
of ehci_clock_enable() (in effect, failures of clk_prepare_enable()).
The patch fixes both issues and gets rid of redundant wrappers around
clk_prepare_enable() and clk_disable_unprepare() to simplify this a bit.

Found by Linux Driver Verification project (linuxtesting.org).

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Link: https://lore.kernel.org/r/20210708083056.21543-1-novikov@ispras.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/host/ehci-mv.c | 23 +++++++++++------------
 1 file changed, 11 insertions(+), 12 deletions(-)

diff --git a/drivers/usb/host/ehci-mv.c b/drivers/usb/host/ehci-mv.c
index cffdc8d01b2a..8fd27249ad25 100644
--- a/drivers/usb/host/ehci-mv.c
+++ b/drivers/usb/host/ehci-mv.c
@@ -42,26 +42,25 @@ struct ehci_hcd_mv {
 	int (*set_vbus)(unsigned int vbus);
 };
 
-static void ehci_clock_enable(struct ehci_hcd_mv *ehci_mv)
+static int mv_ehci_enable(struct ehci_hcd_mv *ehci_mv)
 {
-	clk_prepare_enable(ehci_mv->clk);
-}
+	int retval;
 
-static void ehci_clock_disable(struct ehci_hcd_mv *ehci_mv)
-{
-	clk_disable_unprepare(ehci_mv->clk);
-}
+	retval = clk_prepare_enable(ehci_mv->clk);
+	if (retval)
+		return retval;
 
-static int mv_ehci_enable(struct ehci_hcd_mv *ehci_mv)
-{
-	ehci_clock_enable(ehci_mv);
-	return phy_init(ehci_mv->phy);
+	retval = phy_init(ehci_mv->phy);
+	if (retval)
+		clk_disable_unprepare(ehci_mv->clk);
+
+	return retval;
 }
 
 static void mv_ehci_disable(struct ehci_hcd_mv *ehci_mv)
 {
 	phy_exit(ehci_mv->phy);
-	ehci_clock_disable(ehci_mv);
+	clk_disable_unprepare(ehci_mv->clk);
 }
 
 static int mv_ehci_reset(struct usb_hcd *hcd)
-- 
2.30.2

[PATCH AUTOSEL 5.14 043/252] usb: gadget: composite: Allow bMaxPower=0 if self-powered

[Sasha Levin]

From: Jack Pham <jackp@codeaurora.org>

[ Upstream commit bcacbf06c891374e7fdd7b72d11cda03b0269b43 ]

Currently the composite driver encodes the MaxPower field of
the configuration descriptor by reading the c->MaxPower of the
usb_configuration only if it is non-zero, otherwise it falls back
to using the value hard-coded in CONFIG_USB_GADGET_VBUS_DRAW.
However, there are cases when a configuration must explicitly set
bMaxPower to 0, particularly if its bmAttributes also has the
Self-Powered bit set, which is a valid combination.

This is specifically called out in the USB PD specification section
9.1, in which a PDUSB device "shall report zero in the bMaxPower
field after negotiating a mutually agreeable Contract", and also
verified by the USB Type-C Functional Test TD.4.10.2 Sink Power
Precedence Test.

The fix allows the c->MaxPower to be used for encoding the bMaxPower
even if it is 0, if the self-powered bit is also set.  An example
usage of this would be for a ConfigFS gadget to be dynamically
updated by userspace when the Type-C connection is determined to be
operating in Power Delivery mode.

Co-developed-by: Ronak Vijay Raheja <rraheja@codeaurora.org>
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Ronak Vijay Raheja <rraheja@codeaurora.org>
Signed-off-by: Jack Pham <jackp@codeaurora.org>
Link: https://lore.kernel.org/r/20210720080907.30292-1-jackp@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/gadget/composite.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 72a9797dbbae..504c1cbc255d 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -482,7 +482,7 @@ static u8 encode_bMaxPower(enum usb_device_speed speed,
 {
 	unsigned val;
 
-	if (c->MaxPower)
+	if (c->MaxPower || (c->bmAttributes & USB_CONFIG_ATT_SELFPOWER))
 		val = c->MaxPower;
 	else
 		val = CONFIG_USB_GADGET_VBUS_DRAW;
@@ -936,7 +936,11 @@ static int set_config(struct usb_composite_dev *cdev,
 	}
 
 	/* when we return, be sure our power usage is valid */
-	power = c->MaxPower ? c->MaxPower : CONFIG_USB_GADGET_VBUS_DRAW;
+	if (c->MaxPower || (c->bmAttributes & USB_CONFIG_ATT_SELFPOWER))
+		power = c->MaxPower;
+	else
+		power = CONFIG_USB_GADGET_VBUS_DRAW;
+
 	if (gadget->speed < USB_SPEED_SUPER)
 		power = min(power, 500U);
 	else
-- 
2.30.2

[PATCH AUTOSEL 5.14 134/252] thunderbolt: Fix port linking by checking all adapters

[Sasha Levin]

From: Sanjay R Mehta <sanju.mehta@amd.com>

[ Upstream commit 42716425ad7e1b6529ec61c260c11176841f4b5f ]

In tb_switch_default_link_ports(), while linking of ports,
only odd-numbered ports (1,3,5..) are considered and even-numbered
ports are not considered.

AMD host router has lane adapters at 2 and 3 and link ports at adapter 2
is not considered due to which lane bonding gets disabled.

Hence added a fix such that all ports are considered during
linking of ports.

Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Sanjay R Mehta <sanju.mehta@amd.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/thunderbolt/switch.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/thunderbolt/switch.c b/drivers/thunderbolt/switch.c
index 10d6b228cc94..eec59030c3a7 100644
--- a/drivers/thunderbolt/switch.c
+++ b/drivers/thunderbolt/switch.c
@@ -2443,7 +2443,7 @@ static void tb_switch_default_link_ports(struct tb_switch *sw)
 {
 	int i;
 
-	for (i = 1; i <= sw->config.max_port_number; i += 2) {
+	for (i = 1; i <= sw->config.max_port_number; i++) {
 		struct tb_port *port = &sw->ports[i];
 		struct tb_port *subordinate;
 
-- 
2.30.2

[PATCH AUTOSEL 5.14 181/252] usb: chipidea: host: fix port index underflow and UBSAN complains

[Sasha Levin]

From: Li Jun <jun.li@nxp.com>

[ Upstream commit e5d6a7c6cfae9e714a0e8ff64facd1ac68a784c6 ]

If wIndex is 0 (and it often is), these calculations underflow and
UBSAN complains, here resolve this by not decrementing the index when
it is equal to 0, this copies the solution from commit 85e3990bea49
("USB: EHCI: avoid undefined pointer arithmetic and placate UBSAN")

Reported-by: Zhipeng Wang <zhipeng.wang_1@nxp.com>
Signed-off-by: Li Jun <jun.li@nxp.com>
Link: https://lore.kernel.org/r/1624004938-2399-1-git-send-email-jun.li@nxp.com
Signed-off-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/chipidea/host.c | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c
index e86d13c04bdb..bdc3885c0d49 100644
--- a/drivers/usb/chipidea/host.c
+++ b/drivers/usb/chipidea/host.c
@@ -240,15 +240,18 @@ static int ci_ehci_hub_control(
 )
 {
 	struct ehci_hcd	*ehci = hcd_to_ehci(hcd);
+	unsigned int	ports = HCS_N_PORTS(ehci->hcs_params);
 	u32 __iomem	*status_reg;
-	u32		temp;
+	u32		temp, port_index;
 	unsigned long	flags;
 	int		retval = 0;
 	bool		done = false;
 	struct device *dev = hcd->self.controller;
 	struct ci_hdrc *ci = dev_get_drvdata(dev);
 
-	status_reg = &ehci->regs->port_status[(wIndex & 0xff) - 1];
+	port_index = wIndex & 0xff;
+	port_index -= (port_index > 0);
+	status_reg = &ehci->regs->port_status[port_index];
 
 	spin_lock_irqsave(&ehci->lock, flags);
 
@@ -260,6 +263,11 @@ static int ci_ehci_hub_control(
 	}
 
 	if (typeReq == SetPortFeature && wValue == USB_PORT_FEAT_SUSPEND) {
+		if (!wIndex || wIndex > ports) {
+			retval = -EPIPE;
+			goto done;
+		}
+
 		temp = ehci_readl(ehci, status_reg);
 		if ((temp & PORT_PE) == 0 || (temp & PORT_RESET) != 0) {
 			retval = -EPIPE;
@@ -288,7 +296,7 @@ static int ci_ehci_hub_control(
 			ehci_writel(ehci, temp, status_reg);
 		}
 
-		set_bit((wIndex & 0xff) - 1, &ehci->suspended_ports);
+		set_bit(port_index, &ehci->suspended_ports);
 		goto done;
 	}
 
-- 
2.30.2

[PATCH AUTOSEL 5.14 215/252] Revert "USB: xhci: fix U1/U2 handling for hardware with XHCI_INTEL_HOST quirk set"

[Sasha Levin]

From: Mathias Nyman <mathias.nyman@linux.intel.com>

[ Upstream commit 2847c46c61486fd8bca9136a6e27177212e78c69 ]

This reverts commit 5d5323a6f3625f101dbfa94ba3ef7706cce38760.

That commit effectively disabled Intel host initiated U1/U2 lpm for devices
with periodic endpoints.

Before that commit we disabled host initiated U1/U2 lpm if the exit latency
was larger than any periodic endpoint service interval, this is according
to xhci spec xhci 1.1 specification section 4.23.5.2

After that commit we incorrectly checked that service interval was smaller
than U1/U2 inactivity timeout. This is not relevant, and can't happen for
Intel hosts as previously set U1/U2 timeout = 105% * service interval.

Patch claimed it solved cases where devices can't be enumerated because of
bandwidth issues. This might be true but it's a side effect of accidentally
turning off lpm.

exit latency calculations have been revised since then

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20210820123503.2605901-5-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/host/xhci.c | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 3618070eba78..18a203c9011e 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -4705,19 +4705,19 @@ static u16 xhci_calculate_u1_timeout(struct xhci_hcd *xhci,
 {
 	unsigned long long timeout_ns;
 
-	if (xhci->quirks & XHCI_INTEL_HOST)
-		timeout_ns = xhci_calculate_intel_u1_timeout(udev, desc);
-	else
-		timeout_ns = udev->u1_params.sel;
-
 	/* Prevent U1 if service interval is shorter than U1 exit latency */
 	if (usb_endpoint_xfer_int(desc) || usb_endpoint_xfer_isoc(desc)) {
-		if (xhci_service_interval_to_ns(desc) <= timeout_ns) {
+		if (xhci_service_interval_to_ns(desc) <= udev->u1_params.mel) {
 			dev_dbg(&udev->dev, "Disable U1, ESIT shorter than exit latency\n");
 			return USB3_LPM_DISABLED;
 		}
 	}
 
+	if (xhci->quirks & XHCI_INTEL_HOST)
+		timeout_ns = xhci_calculate_intel_u1_timeout(udev, desc);
+	else
+		timeout_ns = udev->u1_params.sel;
+
 	/* The U1 timeout is encoded in 1us intervals.
 	 * Don't return a timeout of zero, because that's USB3_LPM_DISABLED.
 	 */
@@ -4769,19 +4769,19 @@ static u16 xhci_calculate_u2_timeout(struct xhci_hcd *xhci,
 {
 	unsigned long long timeout_ns;
 
-	if (xhci->quirks & XHCI_INTEL_HOST)
-		timeout_ns = xhci_calculate_intel_u2_timeout(udev, desc);
-	else
-		timeout_ns = udev->u2_params.sel;
-
 	/* Prevent U2 if service interval is shorter than U2 exit latency */
 	if (usb_endpoint_xfer_int(desc) || usb_endpoint_xfer_isoc(desc)) {
-		if (xhci_service_interval_to_ns(desc) <= timeout_ns) {
+		if (xhci_service_interval_to_ns(desc) <= udev->u2_params.mel) {
 			dev_dbg(&udev->dev, "Disable U2, ESIT shorter than exit latency\n");
 			return USB3_LPM_DISABLED;
 		}
 	}
 
+	if (xhci->quirks & XHCI_INTEL_HOST)
+		timeout_ns = xhci_calculate_intel_u2_timeout(udev, desc);
+	else
+		timeout_ns = udev->u2_params.sel;
+
 	/* The U2 timeout is encoded in 256us intervals */
 	timeout_ns = DIV_ROUND_UP_ULL(timeout_ns, 256 * 1000);
 	/* If the necessary timeout value is bigger than what we can set in the
-- 
2.30.2

[PATCH AUTOSEL 5.14 216/252] usb: dwc3: imx8mp: request irq after initializing dwc3

[Sasha Levin]

From: Nadezda Lutovinova <lutovinova@ispras.ru>

[ Upstream commit 6a48d0ae01a6ab05ae5e78328546a2f5f6d3054a ]

If IRQ occurs between calling  devm_request_threaded_irq() and
initializing dwc3_imx->dwc3, then null pointer dereference occurs
since dwc3_imx->dwc3 is used in dwc3_imx8mp_interrupt().

The patch puts registration of the interrupt handler after
initializing of neccesery data.

Found by Linux Driver Verification project (linuxtesting.org).

Reviewed-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Nadezda Lutovinova <lutovinova@ispras.ru>
Link: https://lore.kernel.org/r/20210819154818.18334-1-lutovinova@ispras.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/dwc3/dwc3-imx8mp.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/drivers/usb/dwc3/dwc3-imx8mp.c b/drivers/usb/dwc3/dwc3-imx8mp.c
index 756faa46d33a..d328d20abfbc 100644
--- a/drivers/usb/dwc3/dwc3-imx8mp.c
+++ b/drivers/usb/dwc3/dwc3-imx8mp.c
@@ -152,13 +152,6 @@ static int dwc3_imx8mp_probe(struct platform_device *pdev)
 	}
 	dwc3_imx->irq = irq;
 
-	err = devm_request_threaded_irq(dev, irq, NULL, dwc3_imx8mp_interrupt,
-					IRQF_ONESHOT, dev_name(dev), dwc3_imx);
-	if (err) {
-		dev_err(dev, "failed to request IRQ #%d --> %d\n", irq, err);
-		goto disable_clks;
-	}
-
 	pm_runtime_set_active(dev);
 	pm_runtime_enable(dev);
 	err = pm_runtime_get_sync(dev);
@@ -186,6 +179,13 @@ static int dwc3_imx8mp_probe(struct platform_device *pdev)
 	}
 	of_node_put(dwc3_np);
 
+	err = devm_request_threaded_irq(dev, irq, NULL, dwc3_imx8mp_interrupt,
+					IRQF_ONESHOT, dev_name(dev), dwc3_imx);
+	if (err) {
+		dev_err(dev, "failed to request IRQ #%d --> %d\n", irq, err);
+		goto depopulate;
+	}
+
 	device_set_wakeup_capable(dev, true);
 	pm_runtime_put(dev);
 
-- 
2.30.2

[PATCH AUTOSEL 5.14 217/252] usb: musb: musb_dsps: request_irq() after initializing musb

[Sasha Levin]

From: Nadezda Lutovinova <lutovinova@ispras.ru>

[ Upstream commit 7c75bde329d7e2a93cf86a5c15c61f96f1446cdc ]

If IRQ occurs between calling  dsps_setup_optional_vbus_irq()
and  dsps_create_musb_pdev(), then null pointer dereference occurs
since glue->musb wasn't initialized yet.

The patch puts initializing of neccesery data before registration
of the interrupt handler.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Nadezda Lutovinova <lutovinova@ispras.ru>
Link: https://lore.kernel.org/r/20210819163323.17714-1-lutovinova@ispras.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/musb/musb_dsps.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c
index 5892f3ce0cdc..ce9fc46c9266 100644
--- a/drivers/usb/musb/musb_dsps.c
+++ b/drivers/usb/musb/musb_dsps.c
@@ -890,23 +890,22 @@ static int dsps_probe(struct platform_device *pdev)
 	if (!glue->usbss_base)
 		return -ENXIO;
 
-	if (usb_get_dr_mode(&pdev->dev) == USB_DR_MODE_PERIPHERAL) {
-		ret = dsps_setup_optional_vbus_irq(pdev, glue);
-		if (ret)
-			goto err_iounmap;
-	}
-
 	platform_set_drvdata(pdev, glue);
 	pm_runtime_enable(&pdev->dev);
 	ret = dsps_create_musb_pdev(glue, pdev);
 	if (ret)
 		goto err;
 
+	if (usb_get_dr_mode(&pdev->dev) == USB_DR_MODE_PERIPHERAL) {
+		ret = dsps_setup_optional_vbus_irq(pdev, glue);
+		if (ret)
+			goto err;
+	}
+
 	return 0;
 
 err:
 	pm_runtime_disable(&pdev->dev);
-err_iounmap:
 	iounmap(glue->usbss_base);
 	return ret;
 }
-- 
2.30.2

[PATCH AUTOSEL 5.14 218/252] usbip: give back URBs for unsent unlink requests during cleanup

[Sasha Levin]

From: Anirudh Rayabharam <mail@anirudhrb.com>

[ Upstream commit 258c81b341c8025d79073ce2d6ce19dcdc7d10d2 ]

In vhci_device_unlink_cleanup(), the URBs for unsent unlink requests are
not given back. This sometimes causes usb_kill_urb to wait indefinitely
for that urb to be given back. syzbot has reported a hung task issue [1]
for this.

To fix this, give back the urbs corresponding to unsent unlink requests
(unlink_tx list) similar to how urbs corresponding to unanswered unlink
requests (unlink_rx list) are given back.

[1]: https://syzkaller.appspot.com/bug?id=08f12df95ae7da69814e64eb5515d5a85ed06b76

Reported-by: syzbot+74d6ef051d3d2eacf428@syzkaller.appspotmail.com
Tested-by: syzbot+74d6ef051d3d2eacf428@syzkaller.appspotmail.com
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Anirudh Rayabharam <mail@anirudhrb.com>
Link: https://lore.kernel.org/r/20210820190122.16379-2-mail@anirudhrb.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/usbip/vhci_hcd.c | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/drivers/usb/usbip/vhci_hcd.c b/drivers/usb/usbip/vhci_hcd.c
index 4ba6bcdaa8e9..190bd3d1c1f0 100644
--- a/drivers/usb/usbip/vhci_hcd.c
+++ b/drivers/usb/usbip/vhci_hcd.c
@@ -957,8 +957,32 @@ static void vhci_device_unlink_cleanup(struct vhci_device *vdev)
 	spin_lock(&vdev->priv_lock);
 
 	list_for_each_entry_safe(unlink, tmp, &vdev->unlink_tx, list) {
+		struct urb *urb;
+
+		/* give back urb of unsent unlink request */
 		pr_info("unlink cleanup tx %lu\n", unlink->unlink_seqnum);
+
+		urb = pickup_urb_and_free_priv(vdev, unlink->unlink_seqnum);
+		if (!urb) {
+			list_del(&unlink->list);
+			kfree(unlink);
+			continue;
+		}
+
+		urb->status = -ENODEV;
+
+		usb_hcd_unlink_urb_from_ep(hcd, urb);
+
 		list_del(&unlink->list);
+
+		spin_unlock(&vdev->priv_lock);
+		spin_unlock_irqrestore(&vhci->lock, flags);
+
+		usb_hcd_giveback_urb(hcd, urb, urb->status);
+
+		spin_lock_irqsave(&vhci->lock, flags);
+		spin_lock(&vdev->priv_lock);
+
 		kfree(unlink);
 	}
 
-- 
2.30.2

[PATCH AUTOSEL 5.14 219/252] usbip:vhci_hcd USB port can get stuck in the disabled state

[Sasha Levin]

From: Shuah Khan <skhan@linuxfoundation.org>

[ Upstream commit 66cce9e73ec61967ed1f97f30cee79bd9a2bb7ee ]

When a remote usb device is attached to the local Virtual USB
Host Controller Root Hub port, the bound device driver may send
a port reset command.

vhci_hcd accepts port resets only when the device doesn't have
port address assigned to it. When reset happens device is in
assigned/used state and vhci_hcd rejects it leaving the port in
a stuck state.

This problem was found when a blue-tooth or xbox wireless dongle
was passed through using usbip.

A few drivers reset the port during probe including mt76 driver
specific to this bug report. Fix the problem with a change to
honor reset requests when device is in used state (VDEV_ST_USED).

Reported-and-tested-by: Michael <msbroadf@gmail.com>
Suggested-by: Michael <msbroadf@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20210819225937.41037-1-skhan@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/usbip/vhci_hcd.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/usbip/vhci_hcd.c b/drivers/usb/usbip/vhci_hcd.c
index 190bd3d1c1f0..b07b2925ff78 100644
--- a/drivers/usb/usbip/vhci_hcd.c
+++ b/drivers/usb/usbip/vhci_hcd.c
@@ -455,8 +455,14 @@ static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 			vhci_hcd->port_status[rhport] &= ~(1 << USB_PORT_FEAT_RESET);
 			vhci_hcd->re_timeout = 0;
 
+			/*
+			 * A few drivers do usb reset during probe when
+			 * the device could be in VDEV_ST_USED state
+			 */
 			if (vhci_hcd->vdev[rhport].ud.status ==
-			    VDEV_ST_NOTASSIGNED) {
+				VDEV_ST_NOTASSIGNED ||
+			    vhci_hcd->vdev[rhport].ud.status ==
+				VDEV_ST_USED) {
 				usbip_dbg_vhci_rh(
 					" enable rhport %d (status %u)\n",
 					rhport,
-- 
2.30.2

[PATCH AUTOSEL 5.14 220/252] usb: xhci-mtk: fix use-after-free of mtk->hcd

[Sasha Levin]

From: Chunfeng Yun <chunfeng.yun@mediatek.com>

[ Upstream commit 7f85c16f40d8be5656fb3476909db5c3a5a9c6ea ]

 BUG: KASAN: use-after-free in usb_hcd_is_primary_hcd+0x38/0x60
 Call trace:
  dump_backtrace+0x0/0x3dc
  show_stack+0x20/0x2c
  dump_stack+0x15c/0x1d4
  print_address_description+0x7c/0x510
  kasan_report+0x164/0x1ac
  __asan_report_load8_noabort+0x44/0x50
  usb_hcd_is_primary_hcd+0x38/0x60
  xhci_mtk_runtime_suspend+0x68/0x148
  pm_generic_runtime_suspend+0x90/0xac
  __rpm_callback+0xb8/0x1f4
  rpm_callback+0x54/0x1d0
  rpm_suspend+0x4e0/0xc84
  __pm_runtime_suspend+0xc4/0x114
  xhci_mtk_probe+0xa58/0xd00

This may happen when probe fails, needn't suspend it synchronously,
fix it by using pm_runtime_put_noidle().

Reported-by: Pi Hsun <pihsun@google.com>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1629189389-18779-3-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/host/xhci-mtk.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c
index 2548976bcf05..cb27569186a0 100644
--- a/drivers/usb/host/xhci-mtk.c
+++ b/drivers/usb/host/xhci-mtk.c
@@ -569,7 +569,7 @@ static int xhci_mtk_probe(struct platform_device *pdev)
 	xhci_mtk_ldos_disable(mtk);
 
 disable_pm:
-	pm_runtime_put_sync_autosuspend(dev);
+	pm_runtime_put_noidle(dev);
 	pm_runtime_disable(dev);
 	return ret;
 }
-- 
2.30.2

[PATCH AUTOSEL 5.14 221/252] usb: xhci-mtk: Do not use xhci's virt_dev in drop_endpoint

[Sasha Levin]

From: Chunfeng Yun <chunfeng.yun@mediatek.com>

[ Upstream commit b8731209958a1dffccc2888121f4c0280c990550 ]

xhci-mtk depends on xhci's internal virt_dev when it retrieves its
internal data from usb_host_endpoint both in add_endpoint and
drop_endpoint callbacks. But when setup packet was retired by
transaction errors in xhci_setup_device() path, a virt_dev for the slot
is newly created with real_port 0. This leads to xhci-mtks's NULL pointer
dereference from drop_endpoint callback as xhci-mtk assumes that virt_dev's
real_port is always started from one. The similar problems were addressed
by [1] but that can't cover the failure cases from setup_device.

This patch drops the usages of xhci's virt_dev in xhci-mtk's drop_endpoint
callback by adopting rhashtable for searching mtk's schedule entity
from a given usb_host_endpoint pointer instead of searching a linked list.
So mtk's drop_endpoint callback doesn't have to rely on virt_dev at all.

[1] https://lore.kernel.org/r/1617179142-2681-2-git-send-email-chunfeng.yun@mediatek.com

Signed-off-by: Ikjoon Jang <ikjn@chromium.org>
Link: https://lore.kernel.org/r/20210805133731.1.Icc0f080e75b1312692d4c7c7d25e7df9fe1a05c2@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/host/xhci-mtk-sch.c | 100 ++++++++++++++++----------------
 drivers/usb/host/xhci-mtk.h     |  11 +++-
 2 files changed, 60 insertions(+), 51 deletions(-)

diff --git a/drivers/usb/host/xhci-mtk-sch.c b/drivers/usb/host/xhci-mtk-sch.c
index cffcaf4dfa9f..19482f0f3230 100644
--- a/drivers/usb/host/xhci-mtk-sch.c
+++ b/drivers/usb/host/xhci-mtk-sch.c
@@ -80,7 +80,7 @@ decode_ep(struct usb_host_endpoint *ep, enum usb_device_speed speed)
 		interval /= 1000;
 	}
 
-	snprintf(buf, DBG_BUF_EN, "%s ep%d%s %s, mpkt:%d, interval:%d/%d%s\n",
+	snprintf(buf, DBG_BUF_EN, "%s ep%d%s %s, mpkt:%d, interval:%d/%d%s",
 		 usb_speed_string(speed), usb_endpoint_num(epd),
 		 usb_endpoint_dir_in(epd) ? "in" : "out",
 		 usb_ep_type_string(usb_endpoint_type(epd)),
@@ -129,6 +129,10 @@ get_bw_info(struct xhci_hcd_mtk *mtk, struct usb_device *udev,
 	int bw_index;
 
 	virt_dev = xhci->devs[udev->slot_id];
+	if (!virt_dev->real_port) {
+		WARN_ONCE(1, "%s invalid real_port\n", dev_name(&udev->dev));
+		return NULL;
+	}
 
 	if (udev->speed >= USB_SPEED_SUPER) {
 		if (usb_endpoint_dir_out(&ep->desc))
@@ -236,14 +240,20 @@ static void drop_tt(struct usb_device *udev)
 	}
 }
 
-static struct mu3h_sch_ep_info *create_sch_ep(struct usb_device *udev,
-	struct usb_host_endpoint *ep, struct xhci_ep_ctx *ep_ctx)
+static struct mu3h_sch_ep_info *
+create_sch_ep(struct xhci_hcd_mtk *mtk, struct usb_device *udev,
+	      struct usb_host_endpoint *ep, struct xhci_ep_ctx *ep_ctx)
 {
 	struct mu3h_sch_ep_info *sch_ep;
+	struct mu3h_sch_bw_info *bw_info;
 	struct mu3h_sch_tt *tt = NULL;
 	u32 len_bw_budget_table;
 	size_t mem_size;
 
+	bw_info = get_bw_info(mtk, udev, ep);
+	if (!bw_info)
+		return ERR_PTR(-ENODEV);
+
 	if (is_fs_or_ls(udev->speed))
 		len_bw_budget_table = TT_MICROFRAMES_MAX;
 	else if ((udev->speed >= USB_SPEED_SUPER)
@@ -266,11 +276,13 @@ static struct mu3h_sch_ep_info *create_sch_ep(struct usb_device *udev,
 		}
 	}
 
+	sch_ep->bw_info = bw_info;
 	sch_ep->sch_tt = tt;
 	sch_ep->ep = ep;
 	sch_ep->speed = udev->speed;
 	INIT_LIST_HEAD(&sch_ep->endpoint);
 	INIT_LIST_HEAD(&sch_ep->tt_endpoint);
+	INIT_HLIST_NODE(&sch_ep->hentry);
 
 	return sch_ep;
 }
@@ -585,9 +597,9 @@ static u32 get_esit_boundary(struct mu3h_sch_ep_info *sch_ep)
 	return boundary;
 }
 
-static int check_sch_bw(struct mu3h_sch_bw_info *sch_bw,
-			struct mu3h_sch_ep_info *sch_ep)
+static int check_sch_bw(struct mu3h_sch_ep_info *sch_ep)
 {
+	struct mu3h_sch_bw_info *sch_bw = sch_ep->bw_info;
 	const u32 esit_boundary = get_esit_boundary(sch_ep);
 	const u32 bw_boundary = get_bw_boundary(sch_ep->speed);
 	u32 offset;
@@ -633,23 +645,26 @@ static int check_sch_bw(struct mu3h_sch_bw_info *sch_bw,
 	return load_ep_bw(sch_bw, sch_ep, true);
 }
 
-static void destroy_sch_ep(struct usb_device *udev,
-	struct mu3h_sch_bw_info *sch_bw, struct mu3h_sch_ep_info *sch_ep)
+static void destroy_sch_ep(struct xhci_hcd_mtk *mtk, struct usb_device *udev,
+			   struct mu3h_sch_ep_info *sch_ep)
 {
 	/* only release ep bw check passed by check_sch_bw() */
 	if (sch_ep->allocated)
-		load_ep_bw(sch_bw, sch_ep, false);
+		load_ep_bw(sch_ep->bw_info, sch_ep, false);
 
 	if (sch_ep->sch_tt)
 		drop_tt(udev);
 
 	list_del(&sch_ep->endpoint);
+	hlist_del(&sch_ep->hentry);
 	kfree(sch_ep);
 }
 
-static bool need_bw_sch(struct usb_host_endpoint *ep,
-	enum usb_device_speed speed, int has_tt)
+static bool need_bw_sch(struct usb_device *udev,
+			struct usb_host_endpoint *ep)
 {
+	bool has_tt = udev->tt && udev->tt->hub->parent;
+
 	/* only for periodic endpoints */
 	if (usb_endpoint_xfer_control(&ep->desc)
 		|| usb_endpoint_xfer_bulk(&ep->desc))
@@ -660,7 +675,7 @@ static bool need_bw_sch(struct usb_host_endpoint *ep,
 	 * a TT are also ignored, root-hub will schedule them directly,
 	 * but need set @bpkts field of endpoint context to 1.
 	 */
-	if (is_fs_or_ls(speed) && !has_tt)
+	if (is_fs_or_ls(udev->speed) && !has_tt)
 		return false;
 
 	/* skip endpoint with zero maxpkt */
@@ -675,7 +690,6 @@ int xhci_mtk_sch_init(struct xhci_hcd_mtk *mtk)
 	struct xhci_hcd *xhci = hcd_to_xhci(mtk->hcd);
 	struct mu3h_sch_bw_info *sch_array;
 	int num_usb_bus;
-	int i;
 
 	/* ss IN and OUT are separated */
 	num_usb_bus = xhci->usb3_rhub.num_ports * 2 + xhci->usb2_rhub.num_ports;
@@ -684,12 +698,10 @@ int xhci_mtk_sch_init(struct xhci_hcd_mtk *mtk)
 	if (sch_array == NULL)
 		return -ENOMEM;
 
-	for (i = 0; i < num_usb_bus; i++)
-		INIT_LIST_HEAD(&sch_array[i].bw_ep_list);
-
 	mtk->sch_array = sch_array;
 
 	INIT_LIST_HEAD(&mtk->bw_ep_chk_list);
+	hash_init(mtk->sch_ep_hash);
 
 	return 0;
 }
@@ -713,9 +725,7 @@ static int add_ep_quirk(struct usb_hcd *hcd, struct usb_device *udev,
 	ep_index = xhci_get_endpoint_index(&ep->desc);
 	ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, ep_index);
 
-	xhci_dbg(xhci, "%s %s\n", __func__, decode_ep(ep, udev->speed));
-
-	if (!need_bw_sch(ep, udev->speed, !!virt_dev->tt_info)) {
+	if (!need_bw_sch(udev, ep)) {
 		/*
 		 * set @bpkts to 1 if it is LS or FS periodic endpoint, and its
 		 * device does not connected through an external HS hub
@@ -727,13 +737,16 @@ static int add_ep_quirk(struct usb_hcd *hcd, struct usb_device *udev,
 		return 0;
 	}
 
-	sch_ep = create_sch_ep(udev, ep, ep_ctx);
+	xhci_dbg(xhci, "%s %s\n", __func__, decode_ep(ep, udev->speed));
+
+	sch_ep = create_sch_ep(mtk, udev, ep, ep_ctx);
 	if (IS_ERR_OR_NULL(sch_ep))
 		return -ENOMEM;
 
 	setup_sch_info(ep_ctx, sch_ep);
 
 	list_add_tail(&sch_ep->endpoint, &mtk->bw_ep_chk_list);
+	hash_add(mtk->sch_ep_hash, &sch_ep->hentry, (unsigned long)ep);
 
 	return 0;
 }
@@ -743,22 +756,18 @@ static void drop_ep_quirk(struct usb_hcd *hcd, struct usb_device *udev,
 {
 	struct xhci_hcd_mtk *mtk = hcd_to_mtk(hcd);
 	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
-	struct xhci_virt_device *virt_dev;
-	struct mu3h_sch_bw_info *sch_bw;
-	struct mu3h_sch_ep_info *sch_ep, *tmp;
-
-	virt_dev = xhci->devs[udev->slot_id];
-
-	xhci_dbg(xhci, "%s %s\n", __func__, decode_ep(ep, udev->speed));
+	struct mu3h_sch_ep_info *sch_ep;
+	struct hlist_node *hn;
 
-	if (!need_bw_sch(ep, udev->speed, !!virt_dev->tt_info))
+	if (!need_bw_sch(udev, ep))
 		return;
 
-	sch_bw = get_bw_info(mtk, udev, ep);
+	xhci_err(xhci, "%s %s\n", __func__, decode_ep(ep, udev->speed));
 
-	list_for_each_entry_safe(sch_ep, tmp, &sch_bw->bw_ep_list, endpoint) {
+	hash_for_each_possible_safe(mtk->sch_ep_hash, sch_ep,
+				    hn, hentry, (unsigned long)ep) {
 		if (sch_ep->ep == ep) {
-			destroy_sch_ep(udev, sch_bw, sch_ep);
+			destroy_sch_ep(mtk, udev, sch_ep);
 			break;
 		}
 	}
@@ -769,30 +778,22 @@ int xhci_mtk_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
 	struct xhci_hcd_mtk *mtk = hcd_to_mtk(hcd);
 	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
 	struct xhci_virt_device *virt_dev = xhci->devs[udev->slot_id];
-	struct mu3h_sch_bw_info *sch_bw;
-	struct mu3h_sch_ep_info *sch_ep, *tmp;
+	struct mu3h_sch_ep_info *sch_ep;
 	int ret;
 
 	xhci_dbg(xhci, "%s() udev %s\n", __func__, dev_name(&udev->dev));
 
 	list_for_each_entry(sch_ep, &mtk->bw_ep_chk_list, endpoint) {
-		sch_bw = get_bw_info(mtk, udev, sch_ep->ep);
+		struct xhci_ep_ctx *ep_ctx;
+		struct usb_host_endpoint *ep = sch_ep->ep;
+		unsigned int ep_index = xhci_get_endpoint_index(&ep->desc);
 
-		ret = check_sch_bw(sch_bw, sch_ep);
+		ret = check_sch_bw(sch_ep);
 		if (ret) {
 			xhci_err(xhci, "Not enough bandwidth! (%s)\n",
 				 sch_error_string(-ret));
 			return -ENOSPC;
 		}
-	}
-
-	list_for_each_entry_safe(sch_ep, tmp, &mtk->bw_ep_chk_list, endpoint) {
-		struct xhci_ep_ctx *ep_ctx;
-		struct usb_host_endpoint *ep = sch_ep->ep;
-		unsigned int ep_index = xhci_get_endpoint_index(&ep->desc);
-
-		sch_bw = get_bw_info(mtk, udev, ep);
-		list_move_tail(&sch_ep->endpoint, &sch_bw->bw_ep_list);
 
 		ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, ep_index);
 		ep_ctx->reserved[0] = cpu_to_le32(EP_BPKTS(sch_ep->pkts)
@@ -806,22 +807,23 @@ int xhci_mtk_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
 			sch_ep->offset, sch_ep->repeat);
 	}
 
-	return xhci_check_bandwidth(hcd, udev);
+	ret = xhci_check_bandwidth(hcd, udev);
+	if (!ret)
+		INIT_LIST_HEAD(&mtk->bw_ep_chk_list);
+
+	return ret;
 }
 
 void xhci_mtk_reset_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
 {
 	struct xhci_hcd_mtk *mtk = hcd_to_mtk(hcd);
 	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
-	struct mu3h_sch_bw_info *sch_bw;
 	struct mu3h_sch_ep_info *sch_ep, *tmp;
 
 	xhci_dbg(xhci, "%s() udev %s\n", __func__, dev_name(&udev->dev));
 
-	list_for_each_entry_safe(sch_ep, tmp, &mtk->bw_ep_chk_list, endpoint) {
-		sch_bw = get_bw_info(mtk, udev, sch_ep->ep);
-		destroy_sch_ep(udev, sch_bw, sch_ep);
-	}
+	list_for_each_entry_safe(sch_ep, tmp, &mtk->bw_ep_chk_list, endpoint)
+		destroy_sch_ep(mtk, udev, sch_ep);
 
 	xhci_reset_bandwidth(hcd, udev);
 }
diff --git a/drivers/usb/host/xhci-mtk.h b/drivers/usb/host/xhci-mtk.h
index ace432356c41..f87d199b0818 100644
--- a/drivers/usb/host/xhci-mtk.h
+++ b/drivers/usb/host/xhci-mtk.h
@@ -10,11 +10,15 @@
 #define _XHCI_MTK_H_
 
 #include <linux/clk.h>
+#include <linux/hashtable.h>
 
 #include "xhci.h"
 
 #define BULK_CLKS_NUM	5
 
+/* support at most 64 ep, use 32 size hash table */
+#define SCH_EP_HASH_BITS	5
+
 /**
  * To simplify scheduler algorithm, set a upper limit for ESIT,
  * if a synchromous ep's ESIT is larger than @XHCI_MTK_MAX_ESIT,
@@ -36,14 +40,12 @@ struct mu3h_sch_tt {
  * struct mu3h_sch_bw_info: schedule information for bandwidth domain
  *
  * @bus_bw: array to keep track of bandwidth already used at each uframes
- * @bw_ep_list: eps in the bandwidth domain
  *
  * treat a HS root port as a bandwidth domain, but treat a SS root port as
  * two bandwidth domains, one for IN eps and another for OUT eps.
  */
 struct mu3h_sch_bw_info {
 	u32 bus_bw[XHCI_MTK_MAX_ESIT];
-	struct list_head bw_ep_list;
 };
 
 /**
@@ -53,8 +55,10 @@ struct mu3h_sch_bw_info {
  * @num_budget_microframes: number of continuous uframes
  *		(@repeat==1) scheduled within the interval
  * @bw_cost_per_microframe: bandwidth cost per microframe
+ * @hentry: hash table entry
  * @endpoint: linked into bandwidth domain which it belongs to
  * @tt_endpoint: linked into mu3h_sch_tt's list which it belongs to
+ * @bw_info: bandwidth domain which this endpoint belongs
  * @sch_tt: mu3h_sch_tt linked into
  * @ep_type: endpoint type
  * @maxpkt: max packet size of endpoint
@@ -82,7 +86,9 @@ struct mu3h_sch_ep_info {
 	u32 num_budget_microframes;
 	u32 bw_cost_per_microframe;
 	struct list_head endpoint;
+	struct hlist_node hentry;
 	struct list_head tt_endpoint;
+	struct mu3h_sch_bw_info *bw_info;
 	struct mu3h_sch_tt *sch_tt;
 	u32 ep_type;
 	u32 maxpkt;
@@ -135,6 +141,7 @@ struct xhci_hcd_mtk {
 	struct usb_hcd *hcd;
 	struct mu3h_sch_bw_info *sch_array;
 	struct list_head bw_ep_chk_list;
+	DECLARE_HASHTABLE(sch_ep_hash, SCH_EP_HASH_BITS);
 	struct mu3c_ippc_regs __iomem *ippc_regs;
 	int num_u2_ports;
 	int num_u3_ports;
-- 
2.30.2

[PATCH AUTOSEL 5.14 239/252] usb: isp1760: fix memory pool initialization

[Sasha Levin]

From: Rui Miguel Silva <rui.silva@linaro.org>

[ Upstream commit f757f9291f920e1da4c6cfd4064c6bf59639983e ]

The loops to setup the memory pool were skipping some
blocks, that was not visible on the ISP1763 because it has
fewer blocks than the ISP1761. But won testing on that IP
from the family that would be an issue.

Reported-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Link: https://lore.kernel.org/r/20210827131154.4151862-2-rui.silva@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/isp1760/isp1760-hcd.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/isp1760/isp1760-hcd.c b/drivers/usb/isp1760/isp1760-hcd.c
index 27168b4a4ef2..ffb3a0c8c909 100644
--- a/drivers/usb/isp1760/isp1760-hcd.c
+++ b/drivers/usb/isp1760/isp1760-hcd.c
@@ -588,8 +588,8 @@ static void init_memory(struct isp1760_hcd *priv)
 
 	payload_addr = PAYLOAD_OFFSET;
 
-	for (i = 0, curr = 0; i < ARRAY_SIZE(mem->blocks); i++) {
-		for (j = 0; j < mem->blocks[i]; j++, curr++) {
+	for (i = 0, curr = 0; i < ARRAY_SIZE(mem->blocks); i++, curr += j) {
+		for (j = 0; j < mem->blocks[i]; j++) {
 			priv->memory_pool[curr + j].start = payload_addr;
 			priv->memory_pool[curr + j].size = mem->blocks_size[i];
 			priv->memory_pool[curr + j].free = 1;
-- 
2.30.2

[PATCH AUTOSEL 5.14 240/252] usb: isp1760: fix qtd fill length

[Sasha Levin]

From: Rui Miguel Silva <rui.silva@linaro.org>

[ Upstream commit cbfa3effdf5c2d411c9ce9820f3d33d77bc4697d ]

When trying to send bulks bigger than the biggest block size
we need to split them over several qtd. Fix this limiting the
maximum qtd size to largest block size.

Reported-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Link: https://lore.kernel.org/r/20210827131154.4151862-3-rui.silva@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/isp1760/isp1760-hcd.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/isp1760/isp1760-hcd.c b/drivers/usb/isp1760/isp1760-hcd.c
index ffb3a0c8c909..d2d19548241e 100644
--- a/drivers/usb/isp1760/isp1760-hcd.c
+++ b/drivers/usb/isp1760/isp1760-hcd.c
@@ -1826,9 +1826,11 @@ static void packetize_urb(struct usb_hcd *hcd,
 			goto cleanup;
 
 		if (len > mem->blocks_size[ISP176x_BLOCK_NUM - 1])
-			len = mem->blocks_size[ISP176x_BLOCK_NUM - 1];
+			this_qtd_len = mem->blocks_size[ISP176x_BLOCK_NUM - 1];
+		else
+			this_qtd_len = len;
 
-		this_qtd_len = qtd_fill(qtd, buf, len);
+		this_qtd_len = qtd_fill(qtd, buf, this_qtd_len);
 		list_add_tail(&qtd->qtd_list, head);
 
 		len -= this_qtd_len;
-- 
2.30.2

[PATCH AUTOSEL 5.14 241/252] usb: isp1760: write to status and address register

[Sasha Levin]

From: Rui Miguel Silva <rui.silva@linaro.org>

[ Upstream commit 36815a4a0763bb405ebd776c45553005c1ef7a15 ]

We were already writing directly the port status register to
trigger changes in isp1763. The same is needed in other IP
from the family, including also to setup the read address
before reading from device.

Reported-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Link: https://lore.kernel.org/r/20210827131154.4151862-4-rui.silva@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/isp1760/isp1760-hcd.c | 23 +++++++++++------------
 1 file changed, 11 insertions(+), 12 deletions(-)

diff --git a/drivers/usb/isp1760/isp1760-hcd.c b/drivers/usb/isp1760/isp1760-hcd.c
index d2d19548241e..e517376c3291 100644
--- a/drivers/usb/isp1760/isp1760-hcd.c
+++ b/drivers/usb/isp1760/isp1760-hcd.c
@@ -182,7 +182,7 @@ struct urb_listitem {
 	struct urb *urb;
 };
 
-static const u32 isp1763_hc_portsc1_fields[] = {
+static const u32 isp176x_hc_portsc1_fields[] = {
 	[PORT_OWNER]		= BIT(13),
 	[PORT_POWER]		= BIT(12),
 	[PORT_LSTATUS]		= BIT(10),
@@ -205,27 +205,28 @@ static u32 isp1760_hcd_read(struct usb_hcd *hcd, u32 field)
 }
 
 /*
- * We need, in isp1763, to write directly the values to the portsc1
+ * We need, in isp176x, to write directly the values to the portsc1
  * register so it will make the other values to trigger.
  */
 static void isp1760_hcd_portsc1_set_clear(struct isp1760_hcd *priv, u32 field,
 					  u32 val)
 {
-	u32 bit = isp1763_hc_portsc1_fields[field];
-	u32 port_status = readl(priv->base + ISP1763_HC_PORTSC1);
+	u32 bit = isp176x_hc_portsc1_fields[field];
+	u16 portsc1_reg = priv->is_isp1763 ? ISP1763_HC_PORTSC1 :
+		ISP176x_HC_PORTSC1;
+	u32 port_status = readl(priv->base + portsc1_reg);
 
 	if (val)
-		writel(port_status | bit, priv->base + ISP1763_HC_PORTSC1);
+		writel(port_status | bit, priv->base + portsc1_reg);
 	else
-		writel(port_status & ~bit, priv->base + ISP1763_HC_PORTSC1);
+		writel(port_status & ~bit, priv->base + portsc1_reg);
 }
 
 static void isp1760_hcd_write(struct usb_hcd *hcd, u32 field, u32 val)
 {
 	struct isp1760_hcd *priv = hcd_to_priv(hcd);
 
-	if (unlikely(priv->is_isp1763 &&
-		     (field >= PORT_OWNER && field <= PORT_CONNECT)))
+	if (unlikely((field >= PORT_OWNER && field <= PORT_CONNECT)))
 		return isp1760_hcd_portsc1_set_clear(priv, field, val);
 
 	isp1760_field_write(priv->fields, field, val);
@@ -367,8 +368,7 @@ static void isp1760_mem_read(struct usb_hcd *hcd, u32 src_offset, void *dst,
 {
 	struct isp1760_hcd *priv = hcd_to_priv(hcd);
 
-	isp1760_hcd_write(hcd, MEM_BANK_SEL, ISP_BANK_0);
-	isp1760_hcd_write(hcd, MEM_START_ADDR, src_offset);
+	isp1760_reg_write(priv->regs, ISP176x_HC_MEMORY, src_offset);
 	ndelay(100);
 
 	bank_reads8(priv->base, src_offset, ISP_BANK_0, dst, bytes);
@@ -496,8 +496,7 @@ static void isp1760_ptd_read(struct usb_hcd *hcd, u32 ptd_offset, u32 slot,
 	u16 src_offset = ptd_offset + slot * sizeof(*ptd);
 	struct isp1760_hcd *priv = hcd_to_priv(hcd);
 
-	isp1760_hcd_write(hcd, MEM_BANK_SEL, ISP_BANK_0);
-	isp1760_hcd_write(hcd, MEM_START_ADDR, src_offset);
+	isp1760_reg_write(priv->regs, ISP176x_HC_MEMORY, src_offset);
 	ndelay(90);
 
 	bank_reads8(priv->base, src_offset, ISP_BANK_0, (void *)ptd,
-- 
2.30.2

[PATCH AUTOSEL 5.14 242/252] usb: isp1760: use the right irq status bit

[Sasha Levin]

From: Rui Miguel Silva <rui.silva@linaro.org>

[ Upstream commit 955d0fb590f18ec5c3a4085c7d0e39b6abde0dd6 ]

Instead of using the fields enum values to check interrupts
trigged, use the correct bit values.

Reported-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Link: https://lore.kernel.org/r/20210827131154.4151862-5-rui.silva@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/isp1760/isp1760-udc.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/usb/isp1760/isp1760-udc.c b/drivers/usb/isp1760/isp1760-udc.c
index a78da59d6417..5cafd23345ca 100644
--- a/drivers/usb/isp1760/isp1760-udc.c
+++ b/drivers/usb/isp1760/isp1760-udc.c
@@ -1363,7 +1363,7 @@ static irqreturn_t isp1760_udc_irq(int irq, void *dev)
 
 	status = isp1760_udc_irq_get_status(udc);
 
-	if (status & DC_IEVBUS) {
+	if (status & ISP176x_DC_IEVBUS) {
 		dev_dbg(udc->isp->dev, "%s(VBUS)\n", __func__);
 		/* The VBUS interrupt is only triggered when VBUS appears. */
 		spin_lock(&udc->lock);
@@ -1371,7 +1371,7 @@ static irqreturn_t isp1760_udc_irq(int irq, void *dev)
 		spin_unlock(&udc->lock);
 	}
 
-	if (status & DC_IEBRST) {
+	if (status & ISP176x_DC_IEBRST) {
 		dev_dbg(udc->isp->dev, "%s(BRST)\n", __func__);
 
 		isp1760_udc_reset(udc);
@@ -1391,18 +1391,18 @@ static irqreturn_t isp1760_udc_irq(int irq, void *dev)
 		}
 	}
 
-	if (status & DC_IEP0SETUP) {
+	if (status & ISP176x_DC_IEP0SETUP) {
 		dev_dbg(udc->isp->dev, "%s(EP0SETUP)\n", __func__);
 
 		isp1760_ep0_setup(udc);
 	}
 
-	if (status & DC_IERESM) {
+	if (status & ISP176x_DC_IERESM) {
 		dev_dbg(udc->isp->dev, "%s(RESM)\n", __func__);
 		isp1760_udc_resume(udc);
 	}
 
-	if (status & DC_IESUSP) {
+	if (status & ISP176x_DC_IESUSP) {
 		dev_dbg(udc->isp->dev, "%s(SUSP)\n", __func__);
 
 		spin_lock(&udc->lock);
@@ -1413,7 +1413,7 @@ static irqreturn_t isp1760_udc_irq(int irq, void *dev)
 		spin_unlock(&udc->lock);
 	}
 
-	if (status & DC_IEHS_STA) {
+	if (status & ISP176x_DC_IEHS_STA) {
 		dev_dbg(udc->isp->dev, "%s(HS_STA)\n", __func__);
 		udc->gadget.speed = USB_SPEED_HIGH;
 	}
-- 
2.30.2

[PATCH AUTOSEL 5.14 243/252] usb: isp1760: otg control register access

[Sasha Levin]

From: Rui Miguel Silva <rui.silva@linaro.org>

[ Upstream commit 9c1587d99f9305aa4f10b47fcf1981012aa5381f ]

The set/clear of the otg control values is done writing to
two different 16bit registers, however we setup the regmap
width for isp1760/61 to 32bit value bits.

So, just access the clear register address (0x376)as the high
part of the otg control register set (0x374), and write the
values in one go to make sure they get clear/set.

Reported-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Link: https://lore.kernel.org/r/20210827131154.4151862-6-rui.silva@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/isp1760/isp1760-core.c | 50 ++++++++++++++++--------------
 drivers/usb/isp1760/isp1760-regs.h | 16 ++++++++++
 2 files changed, 42 insertions(+), 24 deletions(-)

diff --git a/drivers/usb/isp1760/isp1760-core.c b/drivers/usb/isp1760/isp1760-core.c
index ff07e2890692..1f2ca22384b0 100644
--- a/drivers/usb/isp1760/isp1760-core.c
+++ b/drivers/usb/isp1760/isp1760-core.c
@@ -30,6 +30,7 @@ static int isp1760_init_core(struct isp1760_device *isp)
 {
 	struct isp1760_hcd *hcd = &isp->hcd;
 	struct isp1760_udc *udc = &isp->udc;
+	u32 otg_ctrl;
 
 	/* Low-level chip reset */
 	if (isp->rst_gpio) {
@@ -83,16 +84,17 @@ static int isp1760_init_core(struct isp1760_device *isp)
 	 *
 	 * TODO: Really support OTG. For now we configure port 1 in device mode
 	 */
-	if (((isp->devflags & ISP1760_FLAG_ISP1761) ||
-	     (isp->devflags & ISP1760_FLAG_ISP1763)) &&
-	    (isp->devflags & ISP1760_FLAG_PERIPHERAL_EN)) {
-		isp1760_field_set(hcd->fields, HW_DM_PULLDOWN);
-		isp1760_field_set(hcd->fields, HW_DP_PULLDOWN);
-		isp1760_field_set(hcd->fields, HW_OTG_DISABLE);
-	} else {
-		isp1760_field_set(hcd->fields, HW_SW_SEL_HC_DC);
-		isp1760_field_set(hcd->fields, HW_VBUS_DRV);
-		isp1760_field_set(hcd->fields, HW_SEL_CP_EXT);
+	if (isp->devflags & ISP1760_FLAG_ISP1761) {
+		if (isp->devflags & ISP1760_FLAG_PERIPHERAL_EN) {
+			otg_ctrl = (ISP176x_HW_DM_PULLDOWN_CLEAR |
+				    ISP176x_HW_DP_PULLDOWN_CLEAR |
+				    ISP176x_HW_OTG_DISABLE);
+		} else {
+			otg_ctrl = (ISP176x_HW_SW_SEL_HC_DC_CLEAR |
+				    ISP176x_HW_VBUS_DRV |
+				    ISP176x_HW_SEL_CP_EXT);
+		}
+		isp1760_reg_write(hcd->regs, ISP176x_HC_OTG_CTRL, otg_ctrl);
 	}
 
 	dev_info(isp->dev, "%s bus width: %u, oc: %s\n",
@@ -235,20 +237,20 @@ static const struct reg_field isp1760_hc_reg_fields[] = {
 	[HC_ISO_IRQ_MASK_AND]	= REG_FIELD(ISP176x_HC_ISO_IRQ_MASK_AND, 0, 31),
 	[HC_INT_IRQ_MASK_AND]	= REG_FIELD(ISP176x_HC_INT_IRQ_MASK_AND, 0, 31),
 	[HC_ATL_IRQ_MASK_AND]	= REG_FIELD(ISP176x_HC_ATL_IRQ_MASK_AND, 0, 31),
-	[HW_OTG_DISABLE]	= REG_FIELD(ISP176x_HC_OTG_CTRL_SET, 10, 10),
-	[HW_SW_SEL_HC_DC]	= REG_FIELD(ISP176x_HC_OTG_CTRL_SET, 7, 7),
-	[HW_VBUS_DRV]		= REG_FIELD(ISP176x_HC_OTG_CTRL_SET, 4, 4),
-	[HW_SEL_CP_EXT]		= REG_FIELD(ISP176x_HC_OTG_CTRL_SET, 3, 3),
-	[HW_DM_PULLDOWN]	= REG_FIELD(ISP176x_HC_OTG_CTRL_SET, 2, 2),
-	[HW_DP_PULLDOWN]	= REG_FIELD(ISP176x_HC_OTG_CTRL_SET, 1, 1),
-	[HW_DP_PULLUP]		= REG_FIELD(ISP176x_HC_OTG_CTRL_SET, 0, 0),
-	[HW_OTG_DISABLE_CLEAR]	= REG_FIELD(ISP176x_HC_OTG_CTRL_CLEAR, 10, 10),
-	[HW_SW_SEL_HC_DC_CLEAR]	= REG_FIELD(ISP176x_HC_OTG_CTRL_CLEAR, 7, 7),
-	[HW_VBUS_DRV_CLEAR]	= REG_FIELD(ISP176x_HC_OTG_CTRL_CLEAR, 4, 4),
-	[HW_SEL_CP_EXT_CLEAR]	= REG_FIELD(ISP176x_HC_OTG_CTRL_CLEAR, 3, 3),
-	[HW_DM_PULLDOWN_CLEAR]	= REG_FIELD(ISP176x_HC_OTG_CTRL_CLEAR, 2, 2),
-	[HW_DP_PULLDOWN_CLEAR]	= REG_FIELD(ISP176x_HC_OTG_CTRL_CLEAR, 1, 1),
-	[HW_DP_PULLUP_CLEAR]	= REG_FIELD(ISP176x_HC_OTG_CTRL_CLEAR, 0, 0),
+	[HW_OTG_DISABLE_CLEAR]	= REG_FIELD(ISP176x_HC_OTG_CTRL, 26, 26),
+	[HW_SW_SEL_HC_DC_CLEAR]	= REG_FIELD(ISP176x_HC_OTG_CTRL, 23, 23),
+	[HW_VBUS_DRV_CLEAR]	= REG_FIELD(ISP176x_HC_OTG_CTRL, 20, 20),
+	[HW_SEL_CP_EXT_CLEAR]	= REG_FIELD(ISP176x_HC_OTG_CTRL, 19, 19),
+	[HW_DM_PULLDOWN_CLEAR]	= REG_FIELD(ISP176x_HC_OTG_CTRL, 18, 18),
+	[HW_DP_PULLDOWN_CLEAR]	= REG_FIELD(ISP176x_HC_OTG_CTRL, 17, 17),
+	[HW_DP_PULLUP_CLEAR]	= REG_FIELD(ISP176x_HC_OTG_CTRL, 16, 16),
+	[HW_OTG_DISABLE]	= REG_FIELD(ISP176x_HC_OTG_CTRL, 10, 10),
+	[HW_SW_SEL_HC_DC]	= REG_FIELD(ISP176x_HC_OTG_CTRL, 7, 7),
+	[HW_VBUS_DRV]		= REG_FIELD(ISP176x_HC_OTG_CTRL, 4, 4),
+	[HW_SEL_CP_EXT]		= REG_FIELD(ISP176x_HC_OTG_CTRL, 3, 3),
+	[HW_DM_PULLDOWN]	= REG_FIELD(ISP176x_HC_OTG_CTRL, 2, 2),
+	[HW_DP_PULLDOWN]	= REG_FIELD(ISP176x_HC_OTG_CTRL, 1, 1),
+	[HW_DP_PULLUP]		= REG_FIELD(ISP176x_HC_OTG_CTRL, 0, 0),
 };
 
 static const struct reg_field isp1763_hc_reg_fields[] = {
diff --git a/drivers/usb/isp1760/isp1760-regs.h b/drivers/usb/isp1760/isp1760-regs.h
index 94ea60c20b2a..3a6751197e97 100644
--- a/drivers/usb/isp1760/isp1760-regs.h
+++ b/drivers/usb/isp1760/isp1760-regs.h
@@ -61,6 +61,7 @@
 #define ISP176x_HC_INT_IRQ_MASK_AND	0x328
 #define ISP176x_HC_ATL_IRQ_MASK_AND	0x32c
 
+#define ISP176x_HC_OTG_CTRL		0x374
 #define ISP176x_HC_OTG_CTRL_SET		0x374
 #define ISP176x_HC_OTG_CTRL_CLEAR	0x376
 
@@ -179,6 +180,21 @@ enum isp176x_host_controller_fields {
 #define ISP176x_DC_IESUSP		BIT(3)
 #define ISP176x_DC_IEBRST		BIT(0)
 
+#define ISP176x_HW_OTG_DISABLE_CLEAR	BIT(26)
+#define ISP176x_HW_SW_SEL_HC_DC_CLEAR	BIT(23)
+#define ISP176x_HW_VBUS_DRV_CLEAR	BIT(20)
+#define ISP176x_HW_SEL_CP_EXT_CLEAR	BIT(19)
+#define ISP176x_HW_DM_PULLDOWN_CLEAR	BIT(18)
+#define ISP176x_HW_DP_PULLDOWN_CLEAR	BIT(17)
+#define ISP176x_HW_DP_PULLUP_CLEAR	BIT(16)
+#define ISP176x_HW_OTG_DISABLE		BIT(10)
+#define ISP176x_HW_SW_SEL_HC_DC		BIT(7)
+#define ISP176x_HW_VBUS_DRV		BIT(4)
+#define ISP176x_HW_SEL_CP_EXT		BIT(3)
+#define ISP176x_HW_DM_PULLDOWN		BIT(2)
+#define ISP176x_HW_DP_PULLDOWN		BIT(1)
+#define ISP176x_HW_DP_PULLUP		BIT(0)
+
 #define ISP176x_DC_ENDPTYP_ISOC		0x01
 #define ISP176x_DC_ENDPTYP_BULK		0x02
 #define ISP176x_DC_ENDPTYP_INTERRUPT	0x03
-- 
2.30.2