* [PATCH] usb: chipidea: move ci_ulpi_init after the phy initialization
@ 2024-04-02 6:23 Michael Grzeschik
2024-04-07 1:19 ` Peter Chen
[not found] ` <CGME20240425194033eucas1p2c1e98d1c55c970e246087e2dab180e84@eucas1p2.samsung.com>
0 siblings, 2 replies; 3+ messages in thread
From: Michael Grzeschik @ 2024-04-02 6:23 UTC (permalink / raw)
To: Peter Chen, Greg Kroah-Hartman; +Cc: linux-usb, linux-kernel, Michael Grzeschik
The function ci_usb_phy_init is already handling the
hw_phymode_configure path which is also only possible after we have
a valid phy. So we move the ci_ulpi_init after the phy initialization
to be really sure to be able to communicate with the ulpi phy.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
---
drivers/usb/chipidea/core.c | 8 ++++----
drivers/usb/chipidea/ulpi.c | 5 -----
2 files changed, 4 insertions(+), 9 deletions(-)
diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index 835bf2428dc6e..bada13f704b62 100644
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -1084,10 +1084,6 @@ static int ci_hdrc_probe(struct platform_device *pdev)
return -ENODEV;
}
- ret = ci_ulpi_init(ci);
- if (ret)
- return ret;
-
if (ci->platdata->phy) {
ci->phy = ci->platdata->phy;
} else if (ci->platdata->usb_phy) {
@@ -1142,6 +1138,10 @@ static int ci_hdrc_probe(struct platform_device *pdev)
goto ulpi_exit;
}
+ ret = ci_ulpi_init(ci);
+ if (ret)
+ return ret;
+
ci->hw_bank.phys = res->start;
ci->irq = platform_get_irq(pdev, 0);
diff --git a/drivers/usb/chipidea/ulpi.c b/drivers/usb/chipidea/ulpi.c
index dfec07e8ae1d2..89fb51e2c3ded 100644
--- a/drivers/usb/chipidea/ulpi.c
+++ b/drivers/usb/chipidea/ulpi.c
@@ -68,11 +68,6 @@ int ci_ulpi_init(struct ci_hdrc *ci)
if (ci->platdata->phy_mode != USBPHY_INTERFACE_MODE_ULPI)
return 0;
- /*
- * Set PORTSC correctly so we can read/write ULPI registers for
- * identification purposes
- */
- hw_phymode_configure(ci);
ci->ulpi_ops.read = ci_ulpi_read;
ci->ulpi_ops.write = ci_ulpi_write;
---
base-commit: 5bab5dc780c9ed0c69fc2f828015532acf4a7848
change-id: 20240328-chipidea-phy-misc-b3f2bc814784
Best regards,
--
Michael Grzeschik <m.grzeschik@pengutronix.de>
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH] usb: chipidea: move ci_ulpi_init after the phy initialization
2024-04-02 6:23 [PATCH] usb: chipidea: move ci_ulpi_init after the phy initialization Michael Grzeschik
@ 2024-04-07 1:19 ` Peter Chen
[not found] ` <CGME20240425194033eucas1p2c1e98d1c55c970e246087e2dab180e84@eucas1p2.samsung.com>
1 sibling, 0 replies; 3+ messages in thread
From: Peter Chen @ 2024-04-07 1:19 UTC (permalink / raw)
To: Michael Grzeschik; +Cc: Greg Kroah-Hartman, linux-usb, linux-kernel
On 24-04-02 08:23:43, Michael Grzeschik wrote:
> The function ci_usb_phy_init is already handling the
> hw_phymode_configure path which is also only possible after we have
> a valid phy. So we move the ci_ulpi_init after the phy initialization
> to be really sure to be able to communicate with the ulpi phy.
>
> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Acked-by: Peter Chen <peter.chen@kernel.org>
> ---
> drivers/usb/chipidea/core.c | 8 ++++----
> drivers/usb/chipidea/ulpi.c | 5 -----
> 2 files changed, 4 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
> index 835bf2428dc6e..bada13f704b62 100644
> --- a/drivers/usb/chipidea/core.c
> +++ b/drivers/usb/chipidea/core.c
> @@ -1084,10 +1084,6 @@ static int ci_hdrc_probe(struct platform_device *pdev)
> return -ENODEV;
> }
>
> - ret = ci_ulpi_init(ci);
> - if (ret)
> - return ret;
> -
> if (ci->platdata->phy) {
> ci->phy = ci->platdata->phy;
> } else if (ci->platdata->usb_phy) {
> @@ -1142,6 +1138,10 @@ static int ci_hdrc_probe(struct platform_device *pdev)
> goto ulpi_exit;
> }
>
> + ret = ci_ulpi_init(ci);
> + if (ret)
> + return ret;
> +
> ci->hw_bank.phys = res->start;
>
> ci->irq = platform_get_irq(pdev, 0);
> diff --git a/drivers/usb/chipidea/ulpi.c b/drivers/usb/chipidea/ulpi.c
> index dfec07e8ae1d2..89fb51e2c3ded 100644
> --- a/drivers/usb/chipidea/ulpi.c
> +++ b/drivers/usb/chipidea/ulpi.c
> @@ -68,11 +68,6 @@ int ci_ulpi_init(struct ci_hdrc *ci)
> if (ci->platdata->phy_mode != USBPHY_INTERFACE_MODE_ULPI)
> return 0;
>
> - /*
> - * Set PORTSC correctly so we can read/write ULPI registers for
> - * identification purposes
> - */
> - hw_phymode_configure(ci);
>
> ci->ulpi_ops.read = ci_ulpi_read;
> ci->ulpi_ops.write = ci_ulpi_write;
>
> ---
> base-commit: 5bab5dc780c9ed0c69fc2f828015532acf4a7848
> change-id: 20240328-chipidea-phy-misc-b3f2bc814784
>
> Best regards,
> --
> Michael Grzeschik <m.grzeschik@pengutronix.de>
>
--
Thanks,
Peter Chen
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] usb: chipidea: move ci_ulpi_init after the phy initialization
[not found] ` <CGME20240425194033eucas1p2c1e98d1c55c970e246087e2dab180e84@eucas1p2.samsung.com>
@ 2024-04-25 19:40 ` Marek Szyprowski
0 siblings, 0 replies; 3+ messages in thread
From: Marek Szyprowski @ 2024-04-25 19:40 UTC (permalink / raw)
To: Michael Grzeschik, Peter Chen, Greg Kroah-Hartman; +Cc: linux-usb, linux-kernel
Dear All,
On 02.04.2024 08:23, Michael Grzeschik wrote:
> The function ci_usb_phy_init is already handling the
> hw_phymode_configure path which is also only possible after we have
> a valid phy. So we move the ci_ulpi_init after the phy initialization
> to be really sure to be able to communicate with the ulpi phy.
>
> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
This patch landed in linux-next some time ago as commit 22ffd399e6e7
("usb: chipidea: move ci_ulpi_init after the phy initialization").
Unfortunately it breaks host USB operation on DragonBoard410c
(arch/arm64/boot/dts/qcom/apq8016-sbc.dts). There is no error nor
warning in the kernel log besides the information about deferred probe
on the chipidea controller:
platform ci_hdrc.0: deferred probe pending: (reason unknown)
Tomorrow I will try to investigate which operation during driver probe
triggers it. If there is anything else to check that might help fixing
this issue, let me know.
> ---
> drivers/usb/chipidea/core.c | 8 ++++----
> drivers/usb/chipidea/ulpi.c | 5 -----
> 2 files changed, 4 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
> index 835bf2428dc6e..bada13f704b62 100644
> --- a/drivers/usb/chipidea/core.c
> +++ b/drivers/usb/chipidea/core.c
> @@ -1084,10 +1084,6 @@ static int ci_hdrc_probe(struct platform_device *pdev)
> return -ENODEV;
> }
>
> - ret = ci_ulpi_init(ci);
> - if (ret)
> - return ret;
> -
> if (ci->platdata->phy) {
> ci->phy = ci->platdata->phy;
> } else if (ci->platdata->usb_phy) {
> @@ -1142,6 +1138,10 @@ static int ci_hdrc_probe(struct platform_device *pdev)
> goto ulpi_exit;
> }
>
> + ret = ci_ulpi_init(ci);
> + if (ret)
> + return ret;
> +
> ci->hw_bank.phys = res->start;
>
> ci->irq = platform_get_irq(pdev, 0);
> diff --git a/drivers/usb/chipidea/ulpi.c b/drivers/usb/chipidea/ulpi.c
> index dfec07e8ae1d2..89fb51e2c3ded 100644
> --- a/drivers/usb/chipidea/ulpi.c
> +++ b/drivers/usb/chipidea/ulpi.c
> @@ -68,11 +68,6 @@ int ci_ulpi_init(struct ci_hdrc *ci)
> if (ci->platdata->phy_mode != USBPHY_INTERFACE_MODE_ULPI)
> return 0;
>
> - /*
> - * Set PORTSC correctly so we can read/write ULPI registers for
> - * identification purposes
> - */
> - hw_phymode_configure(ci);
>
> ci->ulpi_ops.read = ci_ulpi_read;
> ci->ulpi_ops.write = ci_ulpi_write;
>
> ---
> base-commit: 5bab5dc780c9ed0c69fc2f828015532acf4a7848
> change-id: 20240328-chipidea-phy-misc-b3f2bc814784
>
> Best regards,
Best regards
--
Marek Szyprowski, PhD
Samsung R&D Institute Poland
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2024-04-25 19:40 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2024-04-02 6:23 [PATCH] usb: chipidea: move ci_ulpi_init after the phy initialization Michael Grzeschik
2024-04-07 1:19 ` Peter Chen
[not found] ` <CGME20240425194033eucas1p2c1e98d1c55c970e246087e2dab180e84@eucas1p2.samsung.com>
2024-04-25 19:40 ` Marek Szyprowski
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).