* Linux logs error `3:3: cannot set freq 24000 to ep 0x82`
@ 2022-02-17 11:07 Paul Menzel
2022-02-17 13:41 ` James
0 siblings, 1 reply; 3+ messages in thread
From: Paul Menzel @ 2022-02-17 11:07 UTC (permalink / raw)
To: Greg KH; +Cc: linux-usb
[-- Attachment #1: Type: text/plain, Size: 1759 bytes --]
Dear Linux folks,
On the Dell OptiPlex 5055 connect a Logitech Webcam C270 over USB, Linux
5.10.93 reports the error below:
$ dmesg --level=err
[ 13.739837] usb 3-2: 3:3: cannot set freq 24000 to ep 0x82
$ dmesg | grep -e 'usb 3-2' -e input10
[ 4.682834] usb 3-2: new high-speed USB device number 2 using
xhci_hcd
[ 12.268308] input: C270 HD WEBCAM as
/devices/pci0000:00/0000:00:07.1/0000:05:00.3/usb3/3-2/3-2:1.0/input/input10
[ 13.709847] usb 3-2: current rate 16000 is different from the
runtime rate 32000
[ 13.725839] usb 3-2: current rate 24000 is different from the
runtime rate 16000
[ 13.739837] usb 3-2: 3:3: cannot set freq 24000 to ep 0x82
[ 13.864837] usb 3-2: set resolution quirk: cval->res = 384
[ 59.598714] usb 3-2: reset high-speed USB device number 2 using
xhci_hcd
[ 3921.003081] usb 3-2: reset high-speed USB device number 2 using
xhci_hcd
[ 3926.523106] usb 3-2: reset high-speed USB device number 2 using
xhci_hcd
$ lsusb
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 002: ID 046d:0825 Logitech, Inc. Webcam C270
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 002: ID 413c:301a Dell Computer Corp.
Bus 001 Device 003: ID 413c:2113 Dell Computer Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
What does that error mean exactly, and what can be done about it? Could
the message be extended like “Report that problem to the USB device
vendor to fix the firmware to be spec compliant.” or something like
that? (If that is the case.)
Kind regards
Paul
[-- Attachment #2: 20220217-linux-5.10.93-messages.txt --]
[-- Type: text/plain, Size: 62234 bytes --]
[ 0.000000] Linux version 5.10.93.mx64.422 (root@invidia.molgen.mpg.de) (gcc (GCC) 7.5.0, GNU ld (GNU Binutils) 2.37) #1 SMP Fri Jan 21 12:43:28 CET 2022
[ 0.000000] Command line: BOOT_IMAGE=/boot/bzImage.x86_64 root=LABEL=root ro crashkernel=64G-:256M console=ttyS0,115200n8 console=tty0 init=/bin/systemd audit=0 random.trust_cpu=on systemd.unified_cgroup_hierarchy
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000087fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000088000-0x0000000000088fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000089000-0x000000000009efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000bffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009cfffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000009d00000-0x0000000009e6ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000009e70000-0x00000000dadbefff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dadbf000-0x00000000dafbefff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000dafbf000-0x00000000dcfbefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dcfbf000-0x00000000defbefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000defbf000-0x00000000deffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000defff000-0x00000000deffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000df000000-0x00000000dfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.50 by EDK II
[ 0.000000] efi: TPMFinalLog=0xdefa2000 SMBIOS=0xdbeb5000 SMBIOS 3.0=0xdbeb3000 ACPI 2.0=0xdeffe014 ESRT=0xdbe9f298 MEMATTR=0xd8b67018
[ 0.000000] SMBIOS 3.0.0 present.
[ 0.000000] DMI: Dell Inc. OptiPlex 5055 Ryzen CPU/0P03DX, BIOS 1.1.50 07/28/2021
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3493.347 MHz processor
[ 0.001974] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.001976] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.001980] last_pfn = 0x41f000 max_arch_pfn = 0x400000000
[ 0.001984] MTRR default type: uncachable
[ 0.001985] MTRR fixed ranges enabled:
[ 0.001986] 00000-9FFFF write-back
[ 0.001987] A0000-BFFFF uncachable
[ 0.001987] C0000-DFFFF write-through
[ 0.001988] E0000-FFFFF uncachable
[ 0.001989] MTRR variable ranges enabled:
[ 0.001990] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.001991] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.001992] 2 base 0000C0000000 mask FFFFE0000000 write-back
[ 0.001992] 3 base 0000FF000000 mask FFFFFF000000 write-protect
[ 0.001993] 4 disabled
[ 0.001993] 5 disabled
[ 0.001994] 6 disabled
[ 0.001994] 7 disabled
[ 0.001995] TOM2: 0000000420000000 aka 16896M
[ 0.002367] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.002541] last_pfn = 0xdf000 max_arch_pfn = 0x400000000
[ 0.006479] esrt: Reserving ESRT space from 0x00000000dbe9f298 to 0x00000000dbe9f2d0.
[ 0.006486] kexec: Reserving the low 1M of memory for crashkernel
[ 0.006489] Using GB pages for direct mapping
[ 0.006933] Secure boot could not be determined
[ 0.006934] RAMDISK: [mem 0x375e7000-0x37aeafff]
[ 0.006937] ACPI: Early table checksum verification disabled
[ 0.006940] ACPI: RSDP 0x00000000DEFFE014 000024 (v02 AMD )
[ 0.006943] ACPI: XSDT 0x00000000DEFD9188 000104 (v01 AMD MYRTLE 00000001 01000013)
[ 0.006948] ACPI: FACP 0x00000000DEFF0000 00010C (v05 AMD MYRTLE 00000001 ACPI 00040000)
[ 0.006952] ACPI: DSDT 0x00000000DEFE8000 0012CB (v01 AMD MYRTLE 00040000 ACPI 00040000)
[ 0.006955] ACPI: FACS 0x00000000DEB73000 000040
[ 0.006957] ACPI: SSDT 0x00000000DEFF5000 008C4C (v02 AMD MYRTLE 00000002 ACPI 00040000)
[ 0.006960] ACPI: UEFI 0x00000000DEFF4000 000042 (v01 AMD MYRTLE 00000002 ACPI 00040000)
[ 0.006962] ACPI: SSDT 0x00000000DEFF3000 0003C6 (v02 AMD MYRTLE 00001000 ACPI 00040000)
[ 0.006965] ACPI: TPM2 0x00000000DEFF2000 000034 (v03 AMD MYRTLE 00000002 ACPI 00040000)
[ 0.006967] ACPI: ASF! 0x00000000DEFF1000 0000A5 (v32 AMD MYRTLE 00000001 ACPI 00040000)
[ 0.006970] ACPI: HPET 0x00000000DEFEF000 000038 (v01 AMD MYRTLE 00000001 ACPI 00040000)
[ 0.006972] ACPI: APIC 0x00000000DEFEE000 000138 (v03 AMD MYRTLE 00000001 ACPI 00040000)
[ 0.006975] ACPI: MCFG 0x00000000DEFED000 00003C (v01 AMD MYRTLE 00000001 ACPI 00040000)
[ 0.006977] ACPI: SPCR 0x00000000DEFEC000 000050 (v01 AMD MYRTLE 00000001 ACPI 00040000)
[ 0.006979] ACPI: WDAT 0x00000000DEFEB000 00017C (v01 AMD MYRTLE 00000001 ACPI 00040000)
[ 0.006982] ACPI: WDRT 0x00000000DEFEA000 000047 (v01 AMD MYRTLE 00000000 ACPI 00040000)
[ 0.006984] ACPI: SSDT 0x00000000DEFE5000 002AC4 (v01 AMD MYRTLE 00000001 ACPI 00040000)
[ 0.006987] ACPI: SSDT 0x00000000DEFE4000 0000FC (v01 AMD MYRTLE 00000001 ACPI 00040000)
[ 0.006989] ACPI: SSDT 0x00000000DEFDE000 000024 (v01 AMD MYRTLE 00001000 ACPI 00040000)
[ 0.006991] ACPI: SSDT 0x00000000DEFDD000 000E0C (v01 AMD MYRTLE 00000001 ACPI 00040000)
[ 0.006994] ACPI: CRAT 0x00000000DEFDC000 000850 (v01 AMD MYRTLE 00000001 ACPI 00040000)
[ 0.006996] ACPI: CDIT 0x00000000DEFDB000 000029 (v01 AMD MYRTLE 00000001 ACPI 00040000)
[ 0.006998] ACPI: BOOT 0x00000000DEFDA000 000028 (v01 AMD MYRTLE 00000002 ACPI 00040000)
[ 0.007001] ACPI: SSDT 0x00000000DEFDF000 0048E6 (v01 AMD MYRTLE 00000001 ACPI 00040000)
[ 0.007003] ACPI: VFCT 0x00000000DEFCA000 00EC84 (v01 AMD MYRTLE 00000001 ACPI 00040000)
[ 0.007006] ACPI: IVRS 0x00000000DEFC9000 0000D0 (v02 AMD MYRTLE 00000001 ACPI 00040000)
[ 0.007008] ACPI: MSDM 0x00000000DEFC8000 000055 (v03 AMD MYRTLE 06222004 ACPI 00040000)
[ 0.007010] ACPI: SSDT 0x00000000DEFC7000 000920 (v01 AMD MYRTLE 00001000 ACPI 00040000)
[ 0.007013] ACPI: SSDT 0x00000000DEFC6000 0000F8 (v01 AMD MYRTLE 00001000 ACPI 00040000)
[ 0.007015] ACPI: SSDT 0x00000000DEFC4000 001768 (v01 AMD MYRTLE 00000001 ACPI 00040000)
[ 0.007017] ACPI: FPDT 0x00000000DEFC3000 000044 (v01 AMD MYRTLE 00000002 ACPI 00040000)
[ 0.007020] ACPI: BGRT 0x00000000DEFC2000 000038 (v01 AMD MYRTLE 00000002 ACPI 00040000)
[ 0.007022] ACPI: Reserving FACP table memory at [mem 0xdeff0000-0xdeff010b]
[ 0.007023] ACPI: Reserving DSDT table memory at [mem 0xdefe8000-0xdefe92ca]
[ 0.007024] ACPI: Reserving FACS table memory at [mem 0xdeb73000-0xdeb7303f]
[ 0.007025] ACPI: Reserving SSDT table memory at [mem 0xdeff5000-0xdeffdc4b]
[ 0.007026] ACPI: Reserving UEFI table memory at [mem 0xdeff4000-0xdeff4041]
[ 0.007027] ACPI: Reserving SSDT table memory at [mem 0xdeff3000-0xdeff33c5]
[ 0.007028] ACPI: Reserving TPM2 table memory at [mem 0xdeff2000-0xdeff2033]
[ 0.007029] ACPI: Reserving ASF! table memory at [mem 0xdeff1000-0xdeff10a4]
[ 0.007030] ACPI: Reserving HPET table memory at [mem 0xdefef000-0xdefef037]
[ 0.007031] ACPI: Reserving APIC table memory at [mem 0xdefee000-0xdefee137]
[ 0.007032] ACPI: Reserving MCFG table memory at [mem 0xdefed000-0xdefed03b]
[ 0.007033] ACPI: Reserving SPCR table memory at [mem 0xdefec000-0xdefec04f]
[ 0.007034] ACPI: Reserving WDAT table memory at [mem 0xdefeb000-0xdefeb17b]
[ 0.007035] ACPI: Reserving WDRT table memory at [mem 0xdefea000-0xdefea046]
[ 0.007036] ACPI: Reserving SSDT table memory at [mem 0xdefe5000-0xdefe7ac3]
[ 0.007037] ACPI: Reserving SSDT table memory at [mem 0xdefe4000-0xdefe40fb]
[ 0.007038] ACPI: Reserving SSDT table memory at [mem 0xdefde000-0xdefde023]
[ 0.007039] ACPI: Reserving SSDT table memory at [mem 0xdefdd000-0xdefdde0b]
[ 0.007040] ACPI: Reserving CRAT table memory at [mem 0xdefdc000-0xdefdc84f]
[ 0.007041] ACPI: Reserving CDIT table memory at [mem 0xdefdb000-0xdefdb028]
[ 0.007042] ACPI: Reserving BOOT table memory at [mem 0xdefda000-0xdefda027]
[ 0.007042] ACPI: Reserving SSDT table memory at [mem 0xdefdf000-0xdefe38e5]
[ 0.007043] ACPI: Reserving VFCT table memory at [mem 0xdefca000-0xdefd8c83]
[ 0.007044] ACPI: Reserving IVRS table memory at [mem 0xdefc9000-0xdefc90cf]
[ 0.007045] ACPI: Reserving MSDM table memory at [mem 0xdefc8000-0xdefc8054]
[ 0.007046] ACPI: Reserving SSDT table memory at [mem 0xdefc7000-0xdefc791f]
[ 0.007047] ACPI: Reserving SSDT table memory at [mem 0xdefc6000-0xdefc60f7]
[ 0.007048] ACPI: Reserving SSDT table memory at [mem 0xdefc4000-0xdefc5767]
[ 0.007049] ACPI: Reserving FPDT table memory at [mem 0xdefc3000-0xdefc3043]
[ 0.007050] ACPI: Reserving BGRT table memory at [mem 0xdefc2000-0xdefc2037]
[ 0.007058] ACPI: Local APIC address 0xfee00000
[ 0.007059] system APIC only can use physical flat
[ 0.007060] Setting APIC routing to physical flat.
[ 0.007181] No NUMA configuration found
[ 0.007181] Faking a node at [mem 0x0000000000000000-0x000000041effffff]
[ 0.007185] NODE_DATA(0) allocated [mem 0x41eff8000-0x41effcfff]
[ 0.007191] crashkernel size resulted in zero bytes
[ 0.007209] Zone ranges:
[ 0.007209] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.007211] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.007212] Normal [mem 0x0000000100000000-0x000000041effffff]
[ 0.007213] Device empty
[ 0.007214] Movable zone start for each node
[ 0.007215] Early memory node ranges
[ 0.007216] node 0: [mem 0x0000000000001000-0x0000000000087fff]
[ 0.007217] node 0: [mem 0x0000000000089000-0x000000000009efff]
[ 0.007218] node 0: [mem 0x0000000000100000-0x0000000009cfffff]
[ 0.007219] node 0: [mem 0x0000000009e70000-0x00000000dadbefff]
[ 0.007220] node 0: [mem 0x00000000defff000-0x00000000deffffff]
[ 0.007220] node 0: [mem 0x0000000100000000-0x000000041effffff]
[ 0.007223] Initmem setup node 0 [mem 0x0000000000001000-0x000000041effffff]
[ 0.007224] On node 0 totalpages: 4168685
[ 0.007225] DMA zone: 64 pages used for memmap
[ 0.007226] DMA zone: 157 pages reserved
[ 0.007226] DMA zone: 3997 pages, LIFO batch:0
[ 0.007227] DMA32 zone: 13938 pages used for memmap
[ 0.007228] DMA32 zone: 891984 pages, LIFO batch:63
[ 0.007228] Normal zone: 51136 pages used for memmap
[ 0.007229] Normal zone: 3272704 pages, LIFO batch:63
[ 0.007231] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.007232] On node 0, zone DMA: 1 pages in unavailable ranges
[ 0.007251] On node 0, zone DMA: 97 pages in unavailable ranges
[ 0.014000] On node 0, zone DMA32: 368 pages in unavailable ranges
[ 0.014168] On node 0, zone DMA32: 16960 pages in unavailable ranges
[ 0.041157] On node 0, zone Normal: 4096 pages in unavailable ranges
[ 0.041201] On node 0, zone Normal: 4096 pages in unavailable ranges
[ 0.041549] ACPI: PM-Timer IO Port: 0x408
[ 0.041551] ACPI: Local APIC address 0xfee00000
[ 0.041552] system APIC only can use physical flat
[ 0.041557] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.041558] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.041559] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.041560] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.041560] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.041561] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.041562] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.041563] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.041563] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[ 0.041564] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
[ 0.041565] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
[ 0.041565] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
[ 0.041566] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
[ 0.041567] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
[ 0.041568] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
[ 0.041568] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
[ 0.041595] IOAPIC[0]: apic_id 32, version 33, address 0xfec00000, GSI 0-23
[ 0.041599] IOAPIC[1]: apic_id 33, version 33, address 0xfec01000, GSI 24-55
[ 0.041601] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.041602] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.041604] ACPI: IRQ0 used by override.
[ 0.041604] ACPI: IRQ9 used by override.
[ 0.041606] Using ACPI (MADT) for SMP configuration information
[ 0.041607] ACPI: HPET id: 0x10228210 base: 0xfed00000
[ 0.041610] ACPI: SPCR: SPCR table version 1
[ 0.041612] ACPI: SPCR: console: uart,io,0x3f8,115200
[ 0.041614] smpboot: Allowing 16 CPUs, 8 hotplug CPUs
[ 0.041633] [mem 0xe0000000-0xf7ffffff] available for PCI devices
[ 0.041637] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.045863] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:16 nr_node_ids:1
[ 0.046573] percpu: Embedded 57 pages/cpu s193880 r8192 d31400 u262144
[ 0.046579] pcpu-alloc: s193880 r8192 d31400 u262144 alloc=1*2097152
[ 0.046580] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
[ 0.046602] Built 1 zonelists, mobility grouping on. Total pages: 4103390
[ 0.046603] Policy zone: Normal
[ 0.046604] Kernel command line: BOOT_IMAGE=/boot/bzImage.x86_64 root=LABEL=root ro crashkernel=64G-:256M console=ttyS0,115200n8 console=tty0 init=/bin/systemd audit=0 random.trust_cpu=on systemd.unified_cgroup_hierarchy
[ 0.046677] audit: disabled (until reboot)
[ 0.048202] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.048968] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.049015] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.085868] Memory: 16198176K/16674740K available (14348K kernel code, 3476K rwdata, 3760K rodata, 1596K init, 2840K bss, 476308K reserved, 0K cma-reserved)
[ 0.085937] ftrace: allocating 44715 entries in 175 pages
[ 0.097884] ftrace: allocated 175 pages with 6 groups
[ 0.097964] rcu: Hierarchical RCU implementation.
[ 0.097965] rcu: RCU event tracing is enabled.
[ 0.097966] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=16.
[ 0.097967] Rude variant of Tasks RCU enabled.
[ 0.097967] Tracing variant of Tasks RCU enabled.
[ 0.097968] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.097969] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
[ 0.100765] NR_IRQS: 16640, nr_irqs: 1096, preallocated irqs: 16
[ 0.101049] random: crng done (trusting CPU's manufacturer)
[ 0.101180] Console: colour dummy device 80x25
[ 0.101372] printk: console [tty0] enabled
[ 1.343790] printk: console [ttyS0] enabled
[ 1.347996] ACPI: Core revision 20200925
[ 1.352124] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 1.361290] APIC: Switch to symmetric I/O mode setup
[ 1.370162] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 1.380290] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x325ac4318c1, max_idle_ns: 440795218849 ns
[ 1.390825] Calibrating delay loop (skipped), value calculated using timer frequency.. 6986.69 BogoMIPS (lpj=3493347)
[ 1.391825] pid_max: default: 32768 minimum: 301
[ 1.394856] LSM: Security Framework initializing
[ 1.395873] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 1.396850] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 1.398048] LVT offset 1 assigned for vector 0xf9
[ 1.398902] LVT offset 2 assigned for vector 0xf4
[ 1.399840] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
[ 1.400825] Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0
[ 1.401826] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 1.402826] Spectre V2 : Mitigation: Full AMD retpoline
[ 1.403825] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 1.404826] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 1.405826] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 1.407984] Freeing SMP alternatives memory: 44K
[ 1.511897] smpboot: CPU0: AMD Ryzen 5 PRO 1500 Quad-Core Processor (family: 0x17, model: 0x1, stepping: 0x1)
[ 1.513876] Performance Events: Fam17h+ core perfctr, AMD PMU driver.
[ 1.514826] ... version: 0
[ 1.515825] ... bit width: 48
[ 1.516825] ... generic registers: 6
[ 1.517825] ... value mask: 0000ffffffffffff
[ 1.518825] ... max period: 00007fffffffffff
[ 1.519825] ... fixed-purpose events: 0
[ 1.520825] ... event mask: 000000000000003f
[ 1.521872] rcu: Hierarchical SRCU implementation.
[ 1.523129] smp: Bringing up secondary CPUs ...
[ 1.523903] x86: Booting SMP configuration:
[ 1.524828] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 1.533840] smp: Brought up 1 node, 8 CPUs
[ 1.535826] smpboot: Max logical packages: 2
[ 1.536826] smpboot: Total of 8 processors activated (55893.55 BogoMIPS)
[ 1.539397] devtmpfs: initialized
[ 1.542873] x86/mm: Memory block size: 128MB
[ 1.547899] PM: Registering ACPI NVS region [mem 0xdcfbf000-0xdefbefff] (33554432 bytes)
[ 1.549293] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 1.549828] futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
[ 1.550992] NET: Registered protocol family 16
[ 1.551985] thermal_sys: Registered thermal governor 'step_wise'
[ 1.551986] thermal_sys: Registered thermal governor 'user_space'
[ 1.552835] cpuidle: using governor menu
[ 1.554897] Simple Boot Flag at 0x44 set to 0x80
[ 1.559846] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 1.566826] ACPI: bus type PCI registered
[ 1.570865] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 1.580828] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 1.586841] PCI: Using configuration type 1 for base access
[ 1.594656] Kprobes globally optimized
[ 1.597849] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 1.604832] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 1.628564] raid6: avx2x4 gen() 22822 MB/s
[ 1.649563] raid6: avx2x4 xor() 7770 MB/s
[ 1.670563] raid6: avx2x2 gen() 24974 MB/s
[ 1.691563] raid6: avx2x2 xor() 15856 MB/s
[ 1.712563] raid6: avx2x1 gen() 22719 MB/s
[ 1.733563] raid6: avx2x1 xor() 14829 MB/s
[ 1.754564] raid6: sse2x4 gen() 15033 MB/s
[ 1.775564] raid6: sse2x4 xor() 7968 MB/s
[ 1.796564] raid6: sse2x2 gen() 16981 MB/s
[ 1.817563] raid6: sse2x2 xor() 10228 MB/s
[ 1.838563] raid6: sse2x1 gen() 13218 MB/s
[ 1.859564] raid6: sse2x1 xor() 7612 MB/s
[ 1.863825] raid6: using algorithm avx2x2 gen() 24974 MB/s
[ 1.868825] raid6: .... xor() 15856 MB/s, rmw enabled
[ 1.873825] raid6: using avx2x2 recovery algorithm
[ 1.878849] ACPI: Added _OSI(Module Device)
[ 1.882827] ACPI: Added _OSI(Processor Device)
[ 1.887826] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 1.892825] ACPI: Added _OSI(Processor Aggregator Device)
[ 1.897826] ACPI: Added _OSI(Linux-Dell-Video)
[ 1.901827] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 1.907826] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 1.918678] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 1.926010] ACPI: 11 ACPI AML tables successfully acquired and loaded
[ 1.935631] ACPI: Interpreter enabled
[ 1.938834] ACPI: (supports S0 S3 S5)
[ 1.942826] ACPI: Using IOAPIC for interrupt routing
[ 1.948015] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 1.957019] ACPI: Enabled 2 GPEs in block 00 to 1F
[ 1.967134] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 1.972829] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 1.981919] acpi PNP0A08:00: _OSC: platform does not support [LTR]
[ 1.988913] acpi PNP0A08:00: _OSC: OS now controls [PME PCIeCapability]
[ 1.994826] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 2.003831] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 2.013972] PCI host bridge to bus 0000:00
[ 2.017827] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 2.024826] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 2.031826] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 2.038826] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 2.046828] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 2.053832] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 2.061835] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 2.068826] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 2.076826] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 2.083826] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 2.091826] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 2.098826] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 2.106826] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 2.113826] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 2.121826] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 2.128826] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf7ffffff window]
[ 2.136826] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfeafffff window]
[ 2.143826] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 2.149835] pci 0000:00:00.0: [1022:1450] type 00 class 0x060000
[ 2.155891] pci 0000:00:00.2: [1022:1451] type 00 class 0x080600
[ 2.161905] pci 0000:00:01.0: [1022:1452] type 00 class 0x060000
[ 2.167886] pci 0000:00:01.3: [1022:1453] type 01 class 0x060400
[ 2.173876] pci 0000:00:01.3: PME# supported from D0 D3hot D3cold
[ 2.179908] pci 0000:00:02.0: [1022:1452] type 00 class 0x060000
[ 2.185893] pci 0000:00:03.0: [1022:1452] type 00 class 0x060000
[ 2.191881] pci 0000:00:03.1: [1022:1453] type 01 class 0x060400
[ 2.197872] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
[ 2.204923] pci 0000:00:04.0: [1022:1452] type 00 class 0x060000
[ 2.210856] pci 0000:00:07.0: [1022:1452] type 00 class 0x060000
[ 2.216880] pci 0000:00:07.1: [1022:1454] type 01 class 0x060400
[ 2.222844] pci 0000:00:07.1: enabling Extended Tags
[ 2.227849] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
[ 2.233899] pci 0000:00:08.0: [1022:1452] type 00 class 0x060000
[ 2.239880] pci 0000:00:08.1: [1022:1454] type 01 class 0x060400
[ 2.245844] pci 0000:00:08.1: enabling Extended Tags
[ 2.250851] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
[ 2.256936] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
[ 2.263001] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
[ 2.269858] pci 0000:00:18.0: [1022:1460] type 00 class 0x060000
[ 2.275868] pci 0000:00:18.1: [1022:1461] type 00 class 0x060000
[ 2.281867] pci 0000:00:18.2: [1022:1462] type 00 class 0x060000
[ 2.287868] pci 0000:00:18.3: [1022:1463] type 00 class 0x060000
[ 2.293867] pci 0000:00:18.4: [1022:1464] type 00 class 0x060000
[ 2.299868] pci 0000:00:18.5: [1022:1465] type 00 class 0x060000
[ 2.305867] pci 0000:00:18.6: [1022:1466] type 00 class 0x060000
[ 2.311867] pci 0000:00:18.7: [1022:1467] type 00 class 0x060000
[ 2.317915] pci 0000:01:00.0: [1022:43bb] type 00 class 0x0c0330
[ 2.323840] pci 0000:01:00.0: reg 0x10: [mem 0xf0820000-0xf0827fff 64bit]
[ 2.330905] pci 0000:01:00.0: PME# supported from D3hot D3cold
[ 2.336898] pci 0000:01:00.1: [1022:43b7] type 00 class 0x010601
[ 2.342865] pci 0000:01:00.1: reg 0x24: [mem 0xf0800000-0xf081ffff]
[ 2.348832] pci 0000:01:00.1: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[ 2.355865] pci 0000:01:00.1: PME# supported from D3hot D3cold
[ 2.361870] pci 0000:01:00.2: [1022:43b2] type 01 class 0x060400
[ 2.367901] pci 0000:01:00.2: PME# supported from D3hot D3cold
[ 2.373881] pci 0000:00:01.3: PCI bridge to [bus 01-03]
[ 2.378829] pci 0000:00:01.3: bridge window [mem 0xf0800000-0xf08fffff]
[ 2.385827] pci 0000:00:01.3: bridge window [mem 0xf0200000-0xf02fffff 64bit pref]
[ 2.393866] pci 0000:02:00.0: [1022:43b4] type 01 class 0x060400
[ 2.399915] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 2.405893] pci 0000:01:00.2: PCI bridge to [bus 02-03]
[ 2.410835] pci 0000:01:00.2: bridge window [mem 0xf0200000-0xf02fffff 64bit pref]
[ 2.418888] pci 0000:03:00.0: [14e4:1687] type 00 class 0x020000
[ 2.424854] pci 0000:03:00.0: reg 0x10: [mem 0xf0220000-0xf022ffff 64bit pref]
[ 2.431844] pci 0000:03:00.0: reg 0x18: [mem 0xf0210000-0xf021ffff 64bit pref]
[ 2.439844] pci 0000:03:00.0: reg 0x20: [mem 0xf0200000-0xf020ffff 64bit pref]
[ 2.446972] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 2.455843] pci 0000:02:00.0: PCI bridge to [bus 03]
[ 2.460828] pci 0000:02:00.0: bridge window [mem 0xf0200000-0xf02fffff 64bit pref]
[ 2.468875] pci 0000:04:00.0: [1002:699f] type 00 class 0x030000
[ 2.474839] pci 0000:04:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
[ 2.481834] pci 0000:04:00.0: reg 0x18: [mem 0xf0000000-0xf01fffff 64bit pref]
[ 2.488831] pci 0000:04:00.0: reg 0x20: [io 0x2000-0x20ff]
[ 2.494831] pci 0000:04:00.0: reg 0x24: [mem 0xf0700000-0xf073ffff]
[ 2.500831] pci 0000:04:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
[ 2.507844] pci 0000:04:00.0: BAR 0: assigned to efifb
[ 2.512880] pci 0000:04:00.0: supports D1 D2
[ 2.516826] pci 0000:04:00.0: PME# supported from D1 D2 D3hot D3cold
[ 2.523914] pci 0000:04:00.1: [1002:aae0] type 00 class 0x040300
[ 2.529838] pci 0000:04:00.1: reg 0x10: [mem 0xf0740000-0xf0743fff 64bit]
[ 2.535893] pci 0000:04:00.1: supports D1 D2
[ 2.540878] pci 0000:00:03.1: PCI bridge to [bus 04]
[ 2.545827] pci 0000:00:03.1: bridge window [io 0x2000-0x2fff]
[ 2.551826] pci 0000:00:03.1: bridge window [mem 0xf0700000-0xf07fffff]
[ 2.558827] pci 0000:00:03.1: bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
[ 2.565853] pci 0000:05:00.0: [1022:145a] type 00 class 0x130000
[ 2.571846] pci 0000:05:00.0: enabling Extended Tags
[ 2.576882] pci 0000:05:00.2: [1022:1456] type 00 class 0x108000
[ 2.583836] pci 0000:05:00.2: reg 0x18: [mem 0xf0500000-0xf05fffff]
[ 2.589832] pci 0000:05:00.2: reg 0x24: [mem 0xf0600000-0xf0601fff]
[ 2.595830] pci 0000:05:00.2: enabling Extended Tags
[ 2.600881] pci 0000:05:00.3: [1022:145c] type 00 class 0x0c0330
[ 2.606834] pci 0000:05:00.3: reg 0x10: [mem 0xf0400000-0xf04fffff 64bit]
[ 2.613843] pci 0000:05:00.3: enabling Extended Tags
[ 2.618849] pci 0000:05:00.3: PME# supported from D0 D3hot D3cold
[ 2.624875] pci 0000:00:07.1: PCI bridge to [bus 05]
[ 2.629828] pci 0000:00:07.1: bridge window [mem 0xf0400000-0xf06fffff]
[ 2.636856] pci 0000:06:00.0: [1022:1455] type 00 class 0x130000
[ 2.642847] pci 0000:06:00.0: enabling Extended Tags
[ 2.647885] pci 0000:06:00.2: [1022:7901] type 00 class 0x010601
[ 2.653849] pci 0000:06:00.2: reg 0x24: [mem 0xf0308000-0xf0308fff]
[ 2.659832] pci 0000:06:00.2: enabling Extended Tags
[ 2.664851] pci 0000:06:00.2: PME# supported from D3hot D3cold
[ 2.670870] pci 0000:06:00.3: [1022:1457] type 00 class 0x040300
[ 2.676831] pci 0000:06:00.3: reg 0x10: [mem 0xf0300000-0xf0307fff]
[ 2.683843] pci 0000:06:00.3: enabling Extended Tags
[ 2.688851] pci 0000:06:00.3: PME# supported from D0 D3hot D3cold
[ 2.694877] pci 0000:00:08.1: PCI bridge to [bus 06]
[ 2.699829] pci 0000:00:08.1: bridge window [mem 0xf0300000-0xf03fffff]
[ 2.706084] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 5 6 10 11) *0, disabled.
[ 2.713881] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 5 6 10 11) *0, disabled.
[ 2.720870] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 5 6 10 11) *0, disabled.
[ 2.727883] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 5 6 10 11) *0, disabled.
[ 2.734878] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 5 6 10 11) *0, disabled.
[ 2.741867] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 5 6 10 11) *0, disabled.
[ 2.748867] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 5 6 10 11) *0, disabled.
[ 2.755867] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 5 6 10 11) *0, disabled.
[ 2.763858] iommu: Default domain type: Translated
[ 2.768835] pci 0000:04:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[ 2.776827] pci 0000:04:00.0: vgaarb: bridge control possible
[ 2.782826] pci 0000:04:00.0: vgaarb: setting as boot device
[ 2.787825] vgaarb: loaded
[ 2.790887] SCSI subsystem initialized
[ 2.794834] libata version 3.00 loaded.
[ 2.794834] ACPI: bus type USB registered
[ 2.798835] usbcore: registered new interface driver usbfs
[ 2.804830] usbcore: registered new interface driver hub
[ 2.809831] usbcore: registered new device driver usb
[ 2.814834] mc: Linux media interface: v0.10
[ 2.818829] videodev: Linux video capture interface: v2.00
[ 2.824829] pps_core: LinuxPPS API ver. 1 registered
[ 2.829825] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 2.838827] PTP clock support registered
[ 2.842851] Registered efivars operations
[ 2.846942] PCI: Using ACPI for IRQ routing
[ 2.856019] PCI: pci_cache_line_size set to 64 bytes
[ 2.856068] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
[ 2.856069] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 2.856069] e820: reserve RAM buffer [mem 0x09d00000-0x0bffffff]
[ 2.856070] e820: reserve RAM buffer [mem 0xdadbf000-0xdbffffff]
[ 2.856071] e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
[ 2.856071] e820: reserve RAM buffer [mem 0x41f000000-0x41fffffff]
[ 2.856075] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 2.860826] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 2.868851] clocksource: Switched to clocksource tsc-early
[ 2.891975] VFS: Disk quotas dquot_6.6.0
[ 2.895923] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.902842] FS-Cache: Loaded
[ 2.905786] CacheFiles: Loaded
[ 2.908876] pnp: PnP ACPI init
[ 2.912107] system 00:00: [mem 0xfec00000-0xfec01fff] could not be reserved
[ 2.919079] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[ 2.925698] system 00:00: [mem 0xfdf00000-0xfdffffff] has been reserved
[ 2.932327] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 2.932401] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 2.932429] system 00:02: [io 0x0400-0x04cf] has been reserved
[ 2.938358] system 00:02: [io 0x04d0-0x04d1] has been reserved
[ 2.944284] system 00:02: [io 0x04d6] has been reserved
[ 2.949605] system 00:02: [io 0x0c00-0x0c01] has been reserved
[ 2.955533] system 00:02: [io 0x0c14] has been reserved
[ 2.960853] system 00:02: [io 0x0c50-0x0c52] has been reserved
[ 2.966784] system 00:02: [io 0x0c6c] has been reserved
[ 2.972106] system 00:02: [io 0x0c6f] has been reserved
[ 2.977426] system 00:02: [io 0x0cd0-0x0cdb] has been reserved
[ 2.983358] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 2.983398] system 00:03: [mem 0x000e0000-0x000fffff] could not be reserved
[ 2.990368] system 00:03: [mem 0xff000000-0xffffffff] has been reserved
[ 2.996994] system 00:03: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 2.997186] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[ 2.997457] pnp: PnP ACPI: found 5 devices
[ 3.007063] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 3.015970] NET: Registered protocol family 2
[ 3.020560] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 3.029660] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 3.038301] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 3.046530] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 3.054056] TCP: Hash tables configured (established 131072 bind 65536)
[ 3.060716] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 3.067547] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 3.074840] pci 0000:01:00.1: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[ 3.084763] pci 0000:04:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
[ 3.094691] pci 0000:01:00.1: BAR 6: assigned [mem 0xf0880000-0xf08fffff pref]
[ 3.101924] pci 0000:02:00.0: PCI bridge to [bus 03]
[ 3.106905] pci 0000:02:00.0: bridge window [mem 0xf0200000-0xf02fffff 64bit pref]
[ 3.114660] pci 0000:01:00.2: PCI bridge to [bus 02-03]
[ 3.119895] pci 0000:01:00.2: bridge window [mem 0xf0200000-0xf02fffff 64bit pref]
[ 3.127647] pci 0000:00:01.3: PCI bridge to [bus 01-03]
[ 3.132881] pci 0000:00:01.3: bridge window [mem 0xf0800000-0xf08fffff]
[ 3.139675] pci 0000:00:01.3: bridge window [mem 0xf0200000-0xf02fffff 64bit pref]
[ 3.147430] pci 0000:04:00.0: BAR 6: assigned [mem 0xf0760000-0xf077ffff pref]
[ 3.154660] pci 0000:00:03.1: PCI bridge to [bus 04]
[ 3.159633] pci 0000:00:03.1: bridge window [io 0x2000-0x2fff]
[ 3.165737] pci 0000:00:03.1: bridge window [mem 0xf0700000-0xf07fffff]
[ 3.172535] pci 0000:00:03.1: bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
[ 3.180289] pci 0000:00:07.1: PCI bridge to [bus 05]
[ 3.185263] pci 0000:00:07.1: bridge window [mem 0xf0400000-0xf06fffff]
[ 3.192061] pci 0000:00:08.1: PCI bridge to [bus 06]
[ 3.197034] pci 0000:00:08.1: bridge window [mem 0xf0300000-0xf03fffff]
[ 3.203833] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 3.210020] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 3.216208] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 3.223094] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 3.229977] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 3.236863] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 3.243746] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 3.250716] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 3.257686] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 3.264657] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 3.271627] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 3.278600] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[ 3.285570] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[ 3.292541] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[ 3.299512] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[ 3.306483] pci_bus 0000:00: resource 19 [mem 0xe0000000-0xf7ffffff window]
[ 3.313455] pci_bus 0000:00: resource 20 [mem 0xfc000000-0xfeafffff window]
[ 3.320423] pci_bus 0000:01: resource 1 [mem 0xf0800000-0xf08fffff]
[ 3.326700] pci_bus 0000:01: resource 2 [mem 0xf0200000-0xf02fffff 64bit pref]
[ 3.333932] pci_bus 0000:02: resource 2 [mem 0xf0200000-0xf02fffff 64bit pref]
[ 3.341167] pci_bus 0000:03: resource 2 [mem 0xf0200000-0xf02fffff 64bit pref]
[ 3.348396] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff]
[ 3.353979] pci_bus 0000:04: resource 1 [mem 0xf0700000-0xf07fffff]
[ 3.360257] pci_bus 0000:04: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref]
[ 3.367488] pci_bus 0000:05: resource 1 [mem 0xf0400000-0xf06fffff]
[ 3.373766] pci_bus 0000:06: resource 1 [mem 0xf0300000-0xf03fffff]
[ 3.380204] pci 0000:04:00.1: D0 power state depends on 0000:04:00.0
[ 3.386703] PCI: CLS 0 bytes, default 64
[ 3.390656] Trying to unpack rootfs image as initramfs...
[ 3.456180] Freeing initrd memory: 5136K
[ 3.460134] AMD-Vi: [Firmware Warn]: EFR mismatch. Use IVHD EFR (0xf77ef22294ada : 0x400f77ef22294ada).
[ 3.469549] pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported
[ 3.476516] pci 0000:00:00.2: can't derive routing for PCI INT A
[ 3.482529] pci 0000:00:00.2: PCI INT A: not connected
[ 3.487705] pci 0000:00:01.0: Adding to iommu group 0
[ 3.492775] pci 0000:00:01.3: Adding to iommu group 1
[ 3.497847] pci 0000:00:02.0: Adding to iommu group 2
[ 3.502918] pci 0000:00:03.0: Adding to iommu group 3
[ 3.507993] pci 0000:00:03.1: Adding to iommu group 4
[ 3.513063] pci 0000:00:04.0: Adding to iommu group 5
[ 3.518136] pci 0000:00:07.0: Adding to iommu group 6
[ 3.523202] pci 0000:00:07.1: Adding to iommu group 6
[ 3.528278] pci 0000:00:08.0: Adding to iommu group 7
[ 3.533343] pci 0000:00:08.1: Adding to iommu group 7
[ 3.538421] pci 0000:00:14.0: Adding to iommu group 8
[ 3.543492] pci 0000:00:14.3: Adding to iommu group 8
[ 3.548585] pci 0000:00:18.0: Adding to iommu group 9
[ 3.553652] pci 0000:00:18.1: Adding to iommu group 9
[ 3.558722] pci 0000:00:18.2: Adding to iommu group 9
[ 3.563795] pci 0000:00:18.3: Adding to iommu group 9
[ 3.568864] pci 0000:00:18.4: Adding to iommu group 9
[ 3.573932] pci 0000:00:18.5: Adding to iommu group 9
[ 3.579001] pci 0000:00:18.6: Adding to iommu group 9
[ 3.584073] pci 0000:00:18.7: Adding to iommu group 9
[ 3.589154] pci 0000:01:00.0: Adding to iommu group 10
[ 3.594310] pci 0000:01:00.1: Adding to iommu group 10
[ 3.599467] pci 0000:01:00.2: Adding to iommu group 10
[ 3.604620] pci 0000:02:00.0: Adding to iommu group 10
[ 3.609768] pci 0000:03:00.0: Adding to iommu group 10
[ 3.614937] pci 0000:04:00.0: Adding to iommu group 11
[ 3.620095] pci 0000:04:00.1: Adding to iommu group 11
[ 3.625250] pci 0000:05:00.0: Adding to iommu group 6
[ 3.630311] pci 0000:05:00.2: Adding to iommu group 6
[ 3.635373] pci 0000:05:00.3: Adding to iommu group 6
[ 3.640435] pci 0000:06:00.0: Adding to iommu group 7
[ 3.645495] pci 0000:06:00.2: Adding to iommu group 7
[ 3.650560] pci 0000:06:00.3: Adding to iommu group 7
[ 3.657087] pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40
[ 3.662581] AMD-Vi: Extended features (0x400f77ef22294ada): PPR NX GT IA GA PC GA_vAPIC
[ 3.670595] AMD-Vi: Interrupt remapping enabled
[ 3.675138] AMD-Vi: Virtual APIC enabled
[ 3.679157] AMD-Vi: Lazy IO/TLB flushing enabled
[ 3.684527] RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 163840 ms ovfl timer
[ 3.692458] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 3.698129] amd_uncore: 4 amd_df counters detected
[ 3.703016] amd_uncore: 6 amd_l3 counters detected
[ 3.708005] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
[ 3.715434] Initialise system trusted keyrings
[ 3.719929] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[ 3.726441] zbud: loaded
[ 3.729023] SGI XFS with ACLs, security attributes, realtime, quota, no debug enabled
[ 3.737013] xor: automatically using best checksumming function avx
[ 3.744072] Key type asymmetric registered
[ 3.748174] Asymmetric key parser 'x509' registered
[ 3.753069] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 3.760506] io scheduler mq-deadline registered
[ 3.765046] io scheduler kyber registered
[ 3.769073] io scheduler bfq registered
[ 3.773076] pcieport 0000:00:01.3: PME: Signaling with IRQ 26
[ 3.778928] pcieport 0000:00:03.1: PME: Signaling with IRQ 27
[ 3.784768] pcieport 0000:00:07.1: PME: Signaling with IRQ 28
[ 3.790673] pcieport 0000:00:08.1: PME: Signaling with IRQ 30
[ 3.796674] efifb: probing for efifb
[ 3.800278] efifb: framebuffer at 0xe0000000, using 9024k, total 9024k
[ 3.806817] efifb: mode is 1920x1200x32, linelength=7680, pages=1
[ 3.812917] efifb: scrolling: redraw
[ 3.816502] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 3.825152] Console: switching to colour frame buffer device 240x75
[ 3.834439] fb0: EFI VGA frame buffer device
[ 3.838732] IPMI message handler: version 39.2
[ 3.843236] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 3.851627] ACPI: Power Button [PWRB]
[ 3.855348] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 3.862789] ACPI: Power Button [PWRF]
[ 3.866951] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 3.873503] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 3.881470] lp: driver loaded but no devices found
[ 3.886401] Linux agpgart interface v0.103
[ 3.894125] brd: module loaded
[ 3.898646] loop: module loaded
[ 3.903444] drbd: initialized. Version: 8.4.11 (api:1/proto:86-101)
[ 3.909782] drbd: built-in
[ 3.912568] drbd: registered as block device major 147
[ 3.918116] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[ 3.925527] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[ 3.932579] megasas: 07.714.04.00-rc1
[ 3.936327] mpt3sas version 35.100.00.00 loaded
[ 3.941191] ahci 0000:01:00.1: version 3.0
[ 3.941477] ahci 0000:01:00.1: SSS flag set, parallel bus scan disabled
[ 3.948472] ahci 0000:01:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0x33 impl SATA mode
[ 3.956727] ahci 0000:01:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst
[ 3.967939] scsi host0: ahci
[ 3.970989] scsi host1: ahci
[ 3.974077] scsi host2: ahci
[ 3.977129] scsi host3: ahci
[ 3.980176] scsi host4: ahci
[ 3.983212] scsi host5: ahci
[ 3.986266] scsi host6: ahci
[ 3.989318] scsi host7: ahci
[ 3.992315] ata1: SATA max UDMA/133 abar m131072@0xf0800000 port 0xf0800100 irq 35
[ 3.999980] ata2: SATA max UDMA/133 abar m131072@0xf0800000 port 0xf0800180 irq 35
[ 4.007633] ata3: DUMMY
[ 4.010144] ata4: DUMMY
[ 4.012663] ata5: SATA max UDMA/133 abar m131072@0xf0800000 port 0xf0800300 irq 35
[ 4.020328] ata6: SATA max UDMA/133 abar m131072@0xf0800000 port 0xf0800380 irq 35
[ 4.027984] ata7: DUMMY
[ 4.030496] ata8: DUMMY
[ 4.033303] ahci 0000:06:00.2: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[ 4.041456] ahci 0000:06:00.2: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part
[ 4.050549] scsi host8: ahci
[ 4.053523] ata9: SATA max UDMA/133 abar m4096@0xf0308000 port 0xf0308100 irq 37
[ 4.061198] tun: Universal TUN/TAP device driver, 1.6
[ 4.080161] tg3 0000:03:00.0 eth0: Tigon3 [partno(BCM95762) rev 5762100] (PCI Express) MAC address 54:bf:64:83:7d:79
[ 4.090776] tg3 0000:03:00.0 eth0: attached PHY is 5762C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
[ 4.100694] tg3 0000:03:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
[ 4.108597] tg3 0000:03:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit]
[ 4.115984] e100: Intel(R) PRO/100 Network Driver
[ 4.120765] e100: Copyright(c) 1999-2006 Intel Corporation
[ 4.126342] e1000: Intel(R) PRO/1000 Network Driver
[ 4.132114] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 4.138752] e1000e: Intel(R) PRO/1000 Network Driver
[ 4.144592] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 4.151402] igb: Intel(R) Gigabit Ethernet Network Driver
[ 4.157676] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 4.164135] igbvf: Intel(R) Gigabit Virtual Function Network Driver
[ 4.171265] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 4.178055] sky2: driver version 1.30
[ 4.182664] Fusion MPT base driver 3.04.20
[ 4.187621] Copyright (c) 1999-2008 LSI Corporation
[ 4.193356] Fusion MPT SPI Host driver 3.04.20
[ 4.198644] Fusion MPT FC Host driver 3.04.20
[ 4.203854] Fusion MPT SAS Host driver 3.04.20
[ 4.209151] Fusion MPT misc device (ioctl) driver 3.04.20
[ 4.215441] mptctl: Registered with Fusion MPT base driver
[ 4.221783] mptctl: /dev/mptctl @ (major,minor=10,220)
[ 4.227779] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.235177] ehci-pci: EHCI PCI platform driver
[ 4.240499] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.247550] ohci-pci: OHCI PCI platform driver
[ 4.252870] uhci_hcd: USB Universal Host Controller Interface driver
[ 4.260217] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 4.266316] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[ 4.330373] xhci_hcd 0000:01:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000010048000410
[ 4.341041] hub 1-0:1.0: USB hub found
[ 4.345747] hub 1-0:1.0: 10 ports detected
[ 4.351537] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 4.357639] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[ 4.365914] xhci_hcd 0000:01:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[ 4.368575] ata9: SATA link down (SStatus 0 SControl 300)
[ 4.374301] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 4.389154] hub 2-0:1.0: USB hub found
[ 4.393816] hub 2-0:1.0: 4 ports detected
[ 4.398812] usb: port power management may be unreliable
[ 4.405289] xhci_hcd 0000:05:00.3: xHCI Host Controller
[ 4.411374] xhci_hcd 0000:05:00.3: new USB bus registered, assigned bus number 3
[ 4.420100] xhci_hcd 0000:05:00.3: hcc params 0x0270f665 hci version 0x100 quirks 0x0000000040000410
[ 4.430698] hub 3-0:1.0: USB hub found
[ 4.435365] hub 3-0:1.0: 4 ports detected
[ 4.440581] xhci_hcd 0000:05:00.3: xHCI Host Controller
[ 4.446677] xhci_hcd 0000:05:00.3: new USB bus registered, assigned bus number 4
[ 4.454932] xhci_hcd 0000:05:00.3: Host supports USB 3.0 SuperSpeed
[ 4.462231] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 4.471296] hub 4-0:1.0: USB hub found
[ 4.475982] hub 4-0:1.0: 4 ports detected
[ 4.481251] usbcore: registered new interface driver usb-storage
[ 4.488091] i8042: PNP: No PS/2 controller found.
[ 4.493604] i8042: Probing ports directly.
[ 4.498960] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 4.500116] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 4.512135] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 4.518302] rtc_cmos 00:01: RTC can wake from S4
[ 4.524842] rtc_cmos 00:01: registered as rtc0
[ 4.530442] rtc_cmos 00:01: setting system clock to 2022-02-17T07:54:11 UTC (1645084451)
[ 4.534212] ata1.00: ATA-8: TOSHIBA MQ01ACF050, AV003D, max UDMA/100
[ 4.539444] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 4.546690] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 4.555347] EFI Variables Facility v0.08 2004-May-17
[ 4.564596] ata1.00: configured for UDMA/100
[ 4.576274] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MQ01ACF0 3D PQ: 0 ANSI: 5
[ 4.588464] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 4.588753] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.600307] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 4.600524] hid: raw HID events driver (C) Jiri Kosina
[ 4.600631] usbcore: registered new interface driver usbhid
[ 4.600632] usbhid: USB HID core driver
[ 4.600701] Key type dns_resolver registered
[ 4.635315] sd 0:0:0:0: [sda] Write Protect is off
[ 4.640960] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.641008] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.651158] microcode: CPU0: patch_level=0x08001137
[ 4.656938] microcode: CPU1: patch_level=0x08001137
[ 4.657840] usb 1-7: new low-speed USB device number 2 using xhci_hcd
[ 4.663625] microcode: CPU2: patch_level=0x08001137
[ 4.669961] microcode: CPU3: patch_level=0x08001137
[ 4.681496] microcode: CPU4: patch_level=0x08001137
[ 4.682834] usb 3-2: new high-speed USB device number 2 using xhci_hcd
[ 4.687254] microcode: CPU5: patch_level=0x08001137
[ 4.700372] microcode: CPU6: patch_level=0x08001137
[ 4.706148] microcode: CPU7: patch_level=0x08001137
[ 4.711894] microcode: Microcode Update Driver: v2.2.
[ 4.711897] IPI shorthand broadcast: enabled
[ 4.717196] sda: sda1 sda2 sda3
[ 4.717824] sched_clock: Marking stable (3438943687, 1278849138)->(4915597745, -197804920)
[ 4.723210] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.726999] registered taskstats version 1
[ 4.738876] tsc: Refined TSC clocksource calibration: 3493.401 MHz
[ 4.741526] Loading compiled-in X.509 certificates
[ 4.746477] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x325af793148, max_idle_ns: 440795378651 ns
[ 4.754186] Loaded X.509 cert 'Build time autogenerated kernel key: fb403ed75c428ae7fb1e396a8524be64f816dce3'
[ 4.780955] clocksource: Switched to clocksource tsc
[ 4.780987] zswap: loaded using pool lzo/zbud
[ 4.912441] ata2: SATA link down (SStatus 0 SControl 300)
[ 4.943318] input: PixArt Dell MS116 USB Optical Mouse as /devices/pci0000:00/0000:00:01.3/0000:01:00.0/usb1/1-7/1-7:1.0/0003:413C:301A.0001/input/input6
[ 4.958059] hid-generic 0003:413C:301A.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt Dell MS116 USB Optical Mouse] on usb-0000:01:00.0-7/input0
[ 5.147867] usb 1-10: new low-speed USB device number 3 using xhci_hcd
[ 5.224356] ata5: SATA link down (SStatus 0 SControl 300)
[ 5.477414] input: Dell KB216 Wired Keyboard as /devices/pci0000:00/0000:00:01.3/0000:01:00.0/usb1/1-10/1-10:1.0/0003:413C:2113.0002/input/input7
[ 5.536392] ata6: SATA link down (SStatus 0 SControl 300)
[ 5.542872] hid-generic 0003:413C:2113.0002: input,hidraw1: USB HID v1.11 Keyboard [Dell KB216 Wired Keyboard] on usb-0000:01:00.0-10/input0
[ 5.556710] Freeing unused kernel image (initmem) memory: 1596K
[ 5.563643] Write protecting the kernel read-only data: 20480k
[ 5.571009] Freeing unused kernel image (text/rodata gap) memory: 2032K
[ 5.573413] input: Dell KB216 Wired Keyboard System Control as /devices/pci0000:00/0000:00:01.3/0000:01:00.0/usb1/1-10/1-10:1.1/0003:413C:2113.0003/input/input8
[ 5.594193] Freeing unused kernel image (rodata/data gap) memory: 336K
[ 5.601787] Run /init as init process
[ 5.606486] with arguments:
[ 5.606487] /init
[ 5.606488] with environment:
[ 5.606488] HOME=/
[ 5.606489] TERM=linux
[ 5.606489] BOOT_IMAGE=/boot/bzImage.x86_64
[ 5.606490] crashkernel=64G-:256M
[ 5.645897] input: Dell KB216 Wired Keyboard Consumer Control as /devices/pci0000:00/0000:00:01.3/0000:01:00.0/usb1/1-10/1-10:1.1/0003:413C:2113.0003/input/input9
[ 5.661497] hid-generic 0003:413C:2113.0003: input,hidraw2: USB HID v1.11 Device [Dell KB216 Wired Keyboard] on usb-0000:01:00.0-10/input1
[ 5.788511] XFS (sda1): Mounting V5 Filesystem
[ 5.956822] XFS (sda1): Ending clean mount
[ 7.003134] systemd[1]: Inserted module 'autofs4'
[ 7.268335] NET: Registered protocol family 10
[ 7.274095] Segment Routing with IPv6
[ 7.300508] NET: Registered protocol family 1
[ 7.306027] systemd[1]: Inserted module 'unix'
[ 7.694985] systemd[1]: systemd 242 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 7.729899] systemd[1]: Detected architecture x86-64.
[ 7.756945] systemd[1]: Set hostname to <placodermi.molgen.mpg.de>.
[ 9.052570] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 9.065304] systemd[1]: Created slice system-getty.slice.
[ 9.074564] systemd[1]: Listening on Journal Socket (/dev/log).
[ 9.084425] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 9.111144] systemd[1]: Listening on Process Core Dump Socket.
[ 9.121011] systemd[1]: Listening on Journal Socket.
[ 9.130143] systemd[1]: Mounting Huge Pages File System...
[ 9.733475] RPC: Registered named UNIX socket transport module.
[ 9.741423] RPC: Registered udp transport module.
[ 9.748383] RPC: Registered tcp transport module.
[ 9.755310] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 10.478450] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 10.626767] systemd-journald[189]: Received request to flush runtime journal from PID 1
[ 11.400177] acpi_cpufreq: overriding BIOS provided _PSD data
[ 11.642854] pstore: Using crash dump compression: deflate
[ 11.651562] pstore: Registered efi as persistent store backend
[ 12.250618] uvcvideo: Found UVC 1.00 device C270 HD WEBCAM (046d:0825)
[ 12.268308] input: C270 HD WEBCAM as /devices/pci0000:00/0000:00:07.1/0000:05:00.3/usb3/3-2/3-2:1.0/input/input10
[ 12.282362] usbcore: registered new interface driver uvcvideo
[ 12.291685] USB Video Class driver (1.1.1)
[ 12.306932] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 12.317189] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
[ 12.327858] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 12.341051] wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found
[ 12.350313] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[ 13.028669] kvm: Nested Virtualization enabled
[ 13.034836] SVM: kvm: Nested Paging enabled
[ 13.042225] SVM: Virtual VMLOAD VMSAVE supported
[ 13.050080] SVM: Virtual GIF supported
[ 13.709847] usb 3-2: current rate 16000 is different from the runtime rate 32000
[ 13.725839] usb 3-2: current rate 24000 is different from the runtime rate 16000
[ 13.739837] usb 3-2: 3:3: cannot set freq 24000 to ep 0x82
[ 13.864837] usb 3-2: set resolution quirk: cval->res = 384
[ 13.874028] usbcore: registered new interface driver snd-usb-audio
[ 14.147588] snd_hda_intel 0000:04:00.1: enabling device (0000 -> 0002)
[ 14.156685] snd_hda_intel 0000:04:00.1: Force to non-snoop mode
[ 14.165937] snd_hda_intel 0000:06:00.3: enabling device (0000 -> 0002)
[ 14.219019] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:04:00.1/sound/card1/input11
[ 14.232398] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:04:00.1/sound/card1/input12
[ 14.245752] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:04:00.1/sound/card1/input13
[ 14.259436] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:04:00.1/sound/card1/input14
[ 14.273163] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.1/0000:04:00.1/sound/card1/input15
[ 14.558726] snd_hda_codec_realtek hdaudioC2D0: autoconfig for ALC3234: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:line
[ 14.573900] snd_hda_codec_realtek hdaudioC2D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0)
[ 14.585985] snd_hda_codec_realtek hdaudioC2D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 14.597464] snd_hda_codec_realtek hdaudioC2D0: mono: mono_out=0x0
[ 14.607439] snd_hda_codec_realtek hdaudioC2D0: inputs:
[ 14.616169] snd_hda_codec_realtek hdaudioC2D0: Headset Mic=0x19
[ 14.626167] snd_hda_codec_realtek hdaudioC2D0: Headphone Mic=0x1a
[ 14.699984] input: HD-Audio Generic Headphone Mic as /devices/pci0000:00/0000:00:08.1/0000:06:00.3/sound/card2/input16
[ 14.713110] input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:08.1/0000:06:00.3/sound/card2/input17
[ 14.845939] AMD-Vi: AMD IOMMUv2 loaded and initialized
[ 20.757716] [drm] amdgpu kernel modesetting enabled.
[ 20.764978] amdgpu: Ignoring ACPI CRAT on non-APU system
[ 20.771899] Virtual CRAT table created for CPU
[ 20.777920] amdgpu: Topology: Add CPU node
[ 20.783682] checking generic (e0000000 8d0000) vs hw (e0000000 10000000)
[ 20.783683] fb0: switching to amdgpudrmfb from EFI VGA
[ 20.790633] Console: switching to colour dummy device 80x25
[ 20.797090] amdgpu 0000:04:00.0: vgaarb: deactivate vga console
[ 20.804045] amdgpu 0000:04:00.0: enabling device (0006 -> 0007)
[ 20.811055] [drm] initializing kernel modesetting (POLARIS12 0x1002:0x699F 0x1028:0x1712 0xC7).
[ 20.821262] amdgpu 0000:04:00.0: amdgpu: Trusted Memory Zone (TMZ) feature not supported
[ 20.830733] [drm] register mmio base: 0xF0700000
[ 20.836158] [drm] register mmio size: 262144
[ 20.841212] [drm] add ip block number 0 <vi_common>
[ 20.846949] [drm] add ip block number 1 <gmc_v8_0>
[ 20.852571] [drm] add ip block number 2 <tonga_ih>
[ 20.858193] [drm] add ip block number 3 <gfx_v8_0>
[ 20.863798] [drm] add ip block number 4 <sdma_v3_0>
[ 20.869503] [drm] add ip block number 5 <powerplay>
[ 20.875206] [drm] add ip block number 6 <dm>
[ 20.880223] [drm] add ip block number 7 <uvd_v6_0>
[ 20.885840] [drm] add ip block number 8 <vce_v3_0>
[ 20.891467] amdgpu 0000:04:00.0: amdgpu: Fetched VBIOS from VFCT
[ 20.898503] amdgpu: ATOM BIOS: 113-D0911501-100
[ 20.903878] [drm] UVD is enabled in VM mode
[ 20.908813] [drm] UVD ENC is enabled in VM mode
[ 20.914141] [drm] VCE enabled in VM mode
[ 20.918806] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
[ 20.959816] amdgpu 0000:04:00.0: amdgpu: VRAM: 4096M 0x000000F400000000 - 0x000000F4FFFFFFFF (4096M used)
[ 20.971982] amdgpu 0000:04:00.0: amdgpu: GART: 256M 0x000000FF00000000 - 0x000000FF0FFFFFFF
[ 20.982550] [drm] Detected VRAM RAM=4096M, BAR=256M
[ 20.988744] [drm] RAM width 128bits GDDR5
[ 20.993954] [TTM] Zone kernel: Available graphics memory: 8177430 KiB
[ 21.001625] [TTM] Zone dma32: Available graphics memory: 2097152 KiB
[ 21.009288] [TTM] Initializing pool allocator
[ 21.014418] [TTM] Initializing DMA pool allocator
[ 21.021841] [drm] amdgpu: 4096M of VRAM memory ready
[ 21.027647] [drm] amdgpu: 4096M of GTT memory ready.
[ 21.033492] [drm] GART: num cpu pages 65536, num gpu pages 65536
[ 21.042272] [drm] PCIE GART of 256M enabled (table at 0x000000F4008CA000).
[ 21.060263] [drm] Chained IB support enabled!
[ 21.079162] amdgpu: hwmgr_sw_init smu backed is polaris10_smu
[ 21.087444] [drm] Found UVD firmware Version: 1.130 Family ID: 16
[ 21.114986] [drm] Found VCE firmware Version: 53.26 Binary ID: 3
[ 21.225392] [drm] Display Core initialized with v3.2.104!
[ 21.240131] snd_hda_intel 0000:04:00.1: bound 0000:04:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
[ 21.373565] [drm] UVD and UVD ENC initialized successfully.
[ 21.481408] [drm] VCE initialized successfully.
[ 21.487862] kfd kfd: Allocated 3969056 bytes on gart
[ 21.494578] Virtual CRAT table created for GPU
[ 21.500244] amdgpu: Topology: Add dGPU node [0x699f:0x1002]
[ 21.507340] kfd kfd: added device 1002:699f
[ 21.512611] amdgpu 0000:04:00.0: amdgpu: SE 2, SH per SE 1, CU per SH 5, active_cu_number 8
[ 21.524900] [drm] fb mappable at 0xE0DFA000
[ 21.530186] [drm] vram apper at 0xE0000000
[ 21.535384] [drm] size 9216000
[ 21.539275] [drm] fb depth is 24
[ 21.543390] [drm] pitch is 7680
[ 21.547751] fbcon: amdgpudrmfb (fb0) is primary device
[ 21.645442] Console: switching to colour frame buffer device 240x75
[ 21.678645] amdgpu 0000:04:00.0: [drm] fb0: amdgpudrmfb frame buffer device
[ 21.690850] [drm] Initialized amdgpu 3.40.0 20150101 for 0000:04:00.0 on minor 0
[ 24.309614] tg3 0000:03:00.0 net00: renamed from eth0
[ 26.180302] 8021q: 802.1Q VLAN Support v1.8
[ 27.213894] XFS (sda2): Mounting V5 Filesystem
[ 27.574812] XFS (sda2): Ending clean mount
[ 29.140283] tg3 0000:03:00.0 net00: Link is up at 1000 Mbps, full duplex
[ 29.150319] tg3 0000:03:00.0 net00: Flow control is off for TX and off for RX
[ 29.160301] tg3 0000:03:00.0 net00: EEE is disabled
[ 29.657914] NFSD: Using UMH upcall client tracking operations.
[ 29.665926] NFSD: starting 90-second grace period (net f0000098)
[ 53.363229] FS-Cache: Netfs 'nfs' registered for caching
[ 53.721329] NFS: Registering the id_resolver key type
[ 53.727811] Key type id_resolver registered
[ 53.733175] Key type id_legacy registered
[ 59.598714] usb 3-2: reset high-speed USB device number 2 using xhci_hcd
[ 3921.003081] usb 3-2: reset high-speed USB device number 2 using xhci_hcd
[ 3926.523106] usb 3-2: reset high-speed USB device number 2 using xhci_hcd
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Linux logs error `3:3: cannot set freq 24000 to ep 0x82`
2022-02-17 11:07 Linux logs error `3:3: cannot set freq 24000 to ep 0x82` Paul Menzel
@ 2022-02-17 13:41 ` James
2022-02-17 14:23 ` Paul Menzel
0 siblings, 1 reply; 3+ messages in thread
From: James @ 2022-02-17 13:41 UTC (permalink / raw)
To: Paul Menzel; +Cc: Greg KH, linux-usb
Feb. 17, 2022 06:07:16 Paul Menzel <pmenzel@molgen.mpg.de>:
> Dear Linux folks,
>
>
> On the Dell OptiPlex 5055 connect a Logitech Webcam C270 over USB, Linux 5.10.93 reports the error below:
>
> $ dmesg --level=err
> [ 13.739837] usb 3-2: 3:3: cannot set freq 24000 to ep 0x82
What problem do you experience?
https://www.techytalk.info/logitech-e3500-webcam-and-cannot-set-freq-16000-to-ep-0x86/
> $ dmesg | grep -e 'usb 3-2' -e input10
> [ 4.682834] usb 3-2: new high-speed USB device number 2 using xhci_hcd
> [ 12.268308] input: C270 HD WEBCAM as /devices/pci0000:00/0000:00:07.1/0000:05:00.3/usb3/3-2/3-2:1.0/input/input10
> [ 13.709847] usb 3-2: current rate 16000 is different from the runtime rate 32000
> [ 13.725839] usb 3-2: current rate 24000 is different from the runtime rate 16000
> [ 13.739837] usb 3-2: 3:3: cannot set freq 24000 to ep 0x82
> [ 13.864837] usb 3-2: set resolution quirk: cval->res = 384
> [ 59.598714] usb 3-2: reset high-speed USB device number 2 using xhci_hcd
> [ 3921.003081] usb 3-2: reset high-speed USB device number 2 using xhci_hcd
> [ 3926.523106] usb 3-2: reset high-speed USB device number 2 using xhci_hcd
>
> $ lsusb
> Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
> Bus 003 Device 002: ID 046d:0825 Logitech, Inc. Webcam C270
> Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
> Bus 001 Device 002: ID 413c:301a Dell Computer Corp.
> Bus 001 Device 003: ID 413c:2113 Dell Computer Corp.
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
>
> What does that error mean exactly, and what can be done about it? Could the message be extended like “Report that problem to the USB device vendor to fix the firmware to be spec compliant.” or something like that? (If that is the case.)
>
>
> Kind regards
>
> Paul
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Linux logs error `3:3: cannot set freq 24000 to ep 0x82`
2022-02-17 13:41 ` James
@ 2022-02-17 14:23 ` Paul Menzel
0 siblings, 0 replies; 3+ messages in thread
From: Paul Menzel @ 2022-02-17 14:23 UTC (permalink / raw)
To: James; +Cc: Greg KH, linux-usb
Dear James,
Am 17.02.22 um 14:41 schrieb James:
> Feb. 17, 2022 06:07:16 Paul Menzel:
>> On the Dell OptiPlex 5055 connect a Logitech Webcam C270 over USB, Linux 5.10.93 reports the error below:
>>
>> $ dmesg --level=err
>> [ 13.739837] usb 3-2: 3:3: cannot set freq 24000 to ep 0x82
> What problem do you experience?
>
> https://www.techytalk.info/logitech-e3500-webcam-and-cannot-set-freq-16000-to-ep-0x86/
The user has not informed us about any problems specific related to the
Webcam. But the user experiences desktop session freezes. I think it’s
unrelated to the error message above, but while debugging errors always
distract. So I am wondering, what that error means, and am asking for
advise, how to continue to get rid of it. Is there some
debugging/tracing option, showing the non-spec-compliant behavior, and
which I could send to Logitech?
>> $ dmesg | grep -e 'usb 3-2' -e input10
>> [ 4.682834] usb 3-2: new high-speed USB device number 2 using xhci_hcd
>> [ 12.268308] input: C270 HD WEBCAM as /devices/pci0000:00/0000:00:07.1/0000:05:00.3/usb3/3-2/3-2:1.0/input/input10
>> [ 13.709847] usb 3-2: current rate 16000 is different from the runtime rate 32000
>> [ 13.725839] usb 3-2: current rate 24000 is different from the runtime rate 16000
>> [ 13.739837] usb 3-2: 3:3: cannot set freq 24000 to ep 0x82
>> [ 13.864837] usb 3-2: set resolution quirk: cval->res = 384
>> [ 59.598714] usb 3-2: reset high-speed USB device number 2 using xhci_hcd
>> [ 3921.003081] usb 3-2: reset high-speed USB device number 2 using xhci_hcd
>> [ 3926.523106] usb 3-2: reset high-speed USB device number 2 using xhci_hcd
>>
>> $ lsusb
>> Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
>> Bus 003 Device 002: ID 046d:0825 Logitech, Inc. Webcam C270
>> Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
>> Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
>> Bus 001 Device 002: ID 413c:301a Dell Computer Corp.
>> Bus 001 Device 003: ID 413c:2113 Dell Computer Corp.
>> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
>>
>> What does that error mean exactly, and what can be done about it? Could the message be extended like “Report that problem to the USB device vendor to fix the firmware to be spec compliant.” or something like that? (If that is the case.)
Kind regards,
Paul
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2022-02-17 14:54 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-02-17 11:07 Linux logs error `3:3: cannot set freq 24000 to ep 0x82` Paul Menzel
2022-02-17 13:41 ` James
2022-02-17 14:23 ` Paul Menzel
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).