* musb: Could not flush host TX2 fifo: csr: 2403
@ 2019-08-21 8:23 Yegor Yefremov
2019-09-23 17:45 ` Tony Lindgren
0 siblings, 1 reply; 3+ messages in thread
From: Yegor Yefremov @ 2019-08-21 8:23 UTC (permalink / raw)
To: linux-omap; +Cc: Bin Liu, linux-usb
I'm moving our systems to the recent kernel and have encountered an
older musb issue [1] that occurs with some 3G/4G modems. In this case
it is SIMCom 7600G-H. After this dump occurs the modem is still
working though.
[ 45.585644] ------------[ cut here ]------------
[ 45.590785] WARNING: CPU: 0 PID: 242 at
drivers/usb/musb/musb_host.c:115 musb_h_tx_flush_fifo+0x118/0x138
[ 45.600421] musb-hdrc musb-hdrc.0: Could not flush host TX2 fifo: csr: 2403
[ 45.607433] Modules linked in: 8021q garp stp mrp llc wl18xx wlcore
mac80211 libarc4 sha256_generic cfg80211 wlcore_sdio c_can_platform
omap_rng rng_core c_can can_dev at24 gpio_pca953x omap_wdt watchdog
rtc_omap leds_gpio led_class
[ 45.628258] CPU: 0 PID: 242 Comm: ModemManager Not tainted 5.3.0-rc5 #2
[ 45.634920] Hardware name: Generic AM33XX (Flattened Device Tree)
[ 45.641092] [<c0111d28>] (unwind_backtrace) from [<c010d000>]
(show_stack+0x10/0x14)
[ 45.648910] [<c010d000>] (show_stack) from [<c09bd0f0>]
(dump_stack+0xd8/0x110)
[ 45.656291] [<c09bd0f0>] (dump_stack) from [<c013a034>] (__warn+0xe0/0x10c)
[ 45.663314] [<c013a034>] (__warn) from [<c013a0a4>]
(warn_slowpath_fmt+0x44/0x6c)
[ 45.670862] [<c013a0a4>] (warn_slowpath_fmt) from [<c076fbf0>]
(musb_h_tx_flush_fifo+0x118/0x138)
[ 45.679806] [<c076fbf0>] (musb_h_tx_flush_fifo) from [<c0770ef4>]
(musb_cleanup_urb+0x128/0x204)
[ 45.688660] [<c0770ef4>] (musb_cleanup_urb) from [<c077167c>]
(musb_urb_dequeue+0x14c/0x234)
[ 45.697165] [<c077167c>] (musb_urb_dequeue) from [<c07323fc>]
(usb_hcd_unlink_urb+0x68/0x84)
[ 45.705667] [<c07323fc>] (usb_hcd_unlink_urb) from [<c0768530>]
(usb_wwan_write+0x64/0x1f0)
[ 45.714090] [<c0768530>] (usb_wwan_write) from [<c075b600>]
(serial_write+0x34/0x60)
[ 45.721898] [<c075b600>] (serial_write) from [<c060e3ec>]
(n_tty_write+0x360/0x460)
[ 45.729626] [<c060e3ec>] (n_tty_write) from [<c060a1bc>]
(tty_write+0x1c0/0x36c)
[ 45.737092] [<c060a1bc>] (tty_write) from [<c02f0410>]
(__vfs_write+0x28/0x1c4)
[ 45.744465] [<c02f0410>] (__vfs_write) from [<c02f2f48>]
(vfs_write+0xa0/0x184)
[ 45.751835] [<c02f2f48>] (vfs_write) from [<c02f31e8>] (ksys_write+0x98/0xdc)
[ 45.759033] [<c02f31e8>] (ksys_write) from [<c0101000>]
(ret_fast_syscall+0x0/0x28)
[ 45.766743] Exception stack(0xcb911fa8 to 0xcb911ff0)
[ 45.771845] 1fa0: 00160170 bea0fc14 00000009
00141be9 00000001 bea0fc14
[ 45.780086] 1fc0: 00160170 bea0fc14 00000000 00000004 00141be9
00000001 00000001 00141be9
[ 45.788322] 1fe0: 00000000 bea0fbc8 b68d992b b68d9934
[ 45.793416] irq event stamp: 109442
[ 45.796945] hardirqs last enabled at (109441): [<c0101a74>]
__irq_svc+0x74/0x98
[ 45.804406] hardirqs last disabled at (109442): [<c09dd3e8>]
_raw_spin_lock_irqsave+0x1c/0x4c
[ 45.812992] softirqs last enabled at (109180): [<c0102580>]
__do_softirq+0x360/0x524
[ 45.820880] softirqs last disabled at (109157): [<c0141c28>]
irq_exit+0x12c/0x17c
[ 45.828416] ---[ end trace eecf6f3aa6209643 ]---
[1] https://patchwork.kernel.org/patch/7389591/
Regards,
Yegor
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: musb: Could not flush host TX2 fifo: csr: 2403
2019-08-21 8:23 musb: Could not flush host TX2 fifo: csr: 2403 Yegor Yefremov
@ 2019-09-23 17:45 ` Tony Lindgren
2019-09-24 7:02 ` Yegor Yefremov
0 siblings, 1 reply; 3+ messages in thread
From: Tony Lindgren @ 2019-09-23 17:45 UTC (permalink / raw)
To: Yegor Yefremov; +Cc: linux-omap, Bin Liu, linux-usb
* Yegor Yefremov <yegorslists@googlemail.com> [190821 01:24]:
> I'm moving our systems to the recent kernel and have encountered an
> older musb issue [1] that occurs with some 3G/4G modems. In this case
> it is SIMCom 7600G-H. After this dump occurs the modem is still
> working though.
>
> [ 45.585644] ------------[ cut here ]------------
> [ 45.590785] WARNING: CPU: 0 PID: 242 at
> drivers/usb/musb/musb_host.c:115 musb_h_tx_flush_fifo+0x118/0x138
> [ 45.600421] musb-hdrc musb-hdrc.0: Could not flush host TX2 fifo: csr: 2403
> [ 45.607433] Modules linked in: 8021q garp stp mrp llc wl18xx wlcore
> mac80211 libarc4 sha256_generic cfg80211 wlcore_sdio c_can_platform
> omap_rng rng_core c_can can_dev at24 gpio_pca953x omap_wdt watchdog
> rtc_omap leds_gpio led_class
> [ 45.628258] CPU: 0 PID: 242 Comm: ModemManager Not tainted 5.3.0-rc5 #2
> [ 45.634920] Hardware name: Generic AM33XX (Flattened Device Tree)
> [ 45.641092] [<c0111d28>] (unwind_backtrace) from [<c010d000>]
> (show_stack+0x10/0x14)
> [ 45.648910] [<c010d000>] (show_stack) from [<c09bd0f0>]
> (dump_stack+0xd8/0x110)
> [ 45.656291] [<c09bd0f0>] (dump_stack) from [<c013a034>] (__warn+0xe0/0x10c)
> [ 45.663314] [<c013a034>] (__warn) from [<c013a0a4>]
> (warn_slowpath_fmt+0x44/0x6c)
> [ 45.670862] [<c013a0a4>] (warn_slowpath_fmt) from [<c076fbf0>]
> (musb_h_tx_flush_fifo+0x118/0x138)
> [ 45.679806] [<c076fbf0>] (musb_h_tx_flush_fifo) from [<c0770ef4>]
> (musb_cleanup_urb+0x128/0x204)
> [ 45.688660] [<c0770ef4>] (musb_cleanup_urb) from [<c077167c>]
> (musb_urb_dequeue+0x14c/0x234)
> [ 45.697165] [<c077167c>] (musb_urb_dequeue) from [<c07323fc>]
> (usb_hcd_unlink_urb+0x68/0x84)
> [ 45.705667] [<c07323fc>] (usb_hcd_unlink_urb) from [<c0768530>]
> (usb_wwan_write+0x64/0x1f0)
> [ 45.714090] [<c0768530>] (usb_wwan_write) from [<c075b600>]
> (serial_write+0x34/0x60)
> [ 45.721898] [<c075b600>] (serial_write) from [<c060e3ec>]
> (n_tty_write+0x360/0x460)
> [ 45.729626] [<c060e3ec>] (n_tty_write) from [<c060a1bc>]
> (tty_write+0x1c0/0x36c)
> [ 45.737092] [<c060a1bc>] (tty_write) from [<c02f0410>]
> (__vfs_write+0x28/0x1c4)
> [ 45.744465] [<c02f0410>] (__vfs_write) from [<c02f2f48>]
> (vfs_write+0xa0/0x184)
> [ 45.751835] [<c02f2f48>] (vfs_write) from [<c02f31e8>] (ksys_write+0x98/0xdc)
> [ 45.759033] [<c02f31e8>] (ksys_write) from [<c0101000>]
> (ret_fast_syscall+0x0/0x28)
> [ 45.766743] Exception stack(0xcb911fa8 to 0xcb911ff0)
> [ 45.771845] 1fa0: 00160170 bea0fc14 00000009
> 00141be9 00000001 bea0fc14
> [ 45.780086] 1fc0: 00160170 bea0fc14 00000000 00000004 00141be9
> 00000001 00000001 00141be9
> [ 45.788322] 1fe0: 00000000 bea0fbc8 b68d992b b68d9934
> [ 45.793416] irq event stamp: 109442
> [ 45.796945] hardirqs last enabled at (109441): [<c0101a74>]
> __irq_svc+0x74/0x98
> [ 45.804406] hardirqs last disabled at (109442): [<c09dd3e8>]
> _raw_spin_lock_irqsave+0x1c/0x4c
> [ 45.812992] softirqs last enabled at (109180): [<c0102580>]
> __do_softirq+0x360/0x524
> [ 45.820880] softirqs last disabled at (109157): [<c0141c28>]
> irq_exit+0x12c/0x17c
> [ 45.828416] ---[ end trace eecf6f3aa6209643 ]---
>
> [1] https://patchwork.kernel.org/patch/7389591/
Hmm so is this with am335x SoC glue or something else?
Regards,
Tony
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: musb: Could not flush host TX2 fifo: csr: 2403
2019-09-23 17:45 ` Tony Lindgren
@ 2019-09-24 7:02 ` Yegor Yefremov
0 siblings, 0 replies; 3+ messages in thread
From: Yegor Yefremov @ 2019-09-24 7:02 UTC (permalink / raw)
To: Tony Lindgren; +Cc: linux-omap, Bin Liu, linux-usb
On Mon, Sep 23, 2019 at 7:45 PM Tony Lindgren <tony@atomide.com> wrote:
>
> * Yegor Yefremov <yegorslists@googlemail.com> [190821 01:24]:
> > I'm moving our systems to the recent kernel and have encountered an
> > older musb issue [1] that occurs with some 3G/4G modems. In this case
> > it is SIMCom 7600G-H. After this dump occurs the modem is still
> > working though.
> >
> > [ 45.585644] ------------[ cut here ]------------
> > [ 45.590785] WARNING: CPU: 0 PID: 242 at
> > drivers/usb/musb/musb_host.c:115 musb_h_tx_flush_fifo+0x118/0x138
> > [ 45.600421] musb-hdrc musb-hdrc.0: Could not flush host TX2 fifo: csr: 2403
> > [ 45.607433] Modules linked in: 8021q garp stp mrp llc wl18xx wlcore
> > mac80211 libarc4 sha256_generic cfg80211 wlcore_sdio c_can_platform
> > omap_rng rng_core c_can can_dev at24 gpio_pca953x omap_wdt watchdog
> > rtc_omap leds_gpio led_class
> > [ 45.628258] CPU: 0 PID: 242 Comm: ModemManager Not tainted 5.3.0-rc5 #2
> > [ 45.634920] Hardware name: Generic AM33XX (Flattened Device Tree)
> > [ 45.641092] [<c0111d28>] (unwind_backtrace) from [<c010d000>]
> > (show_stack+0x10/0x14)
> > [ 45.648910] [<c010d000>] (show_stack) from [<c09bd0f0>]
> > (dump_stack+0xd8/0x110)
> > [ 45.656291] [<c09bd0f0>] (dump_stack) from [<c013a034>] (__warn+0xe0/0x10c)
> > [ 45.663314] [<c013a034>] (__warn) from [<c013a0a4>]
> > (warn_slowpath_fmt+0x44/0x6c)
> > [ 45.670862] [<c013a0a4>] (warn_slowpath_fmt) from [<c076fbf0>]
> > (musb_h_tx_flush_fifo+0x118/0x138)
> > [ 45.679806] [<c076fbf0>] (musb_h_tx_flush_fifo) from [<c0770ef4>]
> > (musb_cleanup_urb+0x128/0x204)
> > [ 45.688660] [<c0770ef4>] (musb_cleanup_urb) from [<c077167c>]
> > (musb_urb_dequeue+0x14c/0x234)
> > [ 45.697165] [<c077167c>] (musb_urb_dequeue) from [<c07323fc>]
> > (usb_hcd_unlink_urb+0x68/0x84)
> > [ 45.705667] [<c07323fc>] (usb_hcd_unlink_urb) from [<c0768530>]
> > (usb_wwan_write+0x64/0x1f0)
> > [ 45.714090] [<c0768530>] (usb_wwan_write) from [<c075b600>]
> > (serial_write+0x34/0x60)
> > [ 45.721898] [<c075b600>] (serial_write) from [<c060e3ec>]
> > (n_tty_write+0x360/0x460)
> > [ 45.729626] [<c060e3ec>] (n_tty_write) from [<c060a1bc>]
> > (tty_write+0x1c0/0x36c)
> > [ 45.737092] [<c060a1bc>] (tty_write) from [<c02f0410>]
> > (__vfs_write+0x28/0x1c4)
> > [ 45.744465] [<c02f0410>] (__vfs_write) from [<c02f2f48>]
> > (vfs_write+0xa0/0x184)
> > [ 45.751835] [<c02f2f48>] (vfs_write) from [<c02f31e8>] (ksys_write+0x98/0xdc)
> > [ 45.759033] [<c02f31e8>] (ksys_write) from [<c0101000>]
> > (ret_fast_syscall+0x0/0x28)
> > [ 45.766743] Exception stack(0xcb911fa8 to 0xcb911ff0)
> > [ 45.771845] 1fa0: 00160170 bea0fc14 00000009
> > 00141be9 00000001 bea0fc14
> > [ 45.780086] 1fc0: 00160170 bea0fc14 00000000 00000004 00141be9
> > 00000001 00000001 00141be9
> > [ 45.788322] 1fe0: 00000000 bea0fbc8 b68d992b b68d9934
> > [ 45.793416] irq event stamp: 109442
> > [ 45.796945] hardirqs last enabled at (109441): [<c0101a74>]
> > __irq_svc+0x74/0x98
> > [ 45.804406] hardirqs last disabled at (109442): [<c09dd3e8>]
> > _raw_spin_lock_irqsave+0x1c/0x4c
> > [ 45.812992] softirqs last enabled at (109180): [<c0102580>]
> > __do_softirq+0x360/0x524
> > [ 45.820880] softirqs last disabled at (109157): [<c0141c28>]
> > irq_exit+0x12c/0x17c
> > [ 45.828416] ---[ end trace eecf6f3aa6209643 ]---
> >
> > [1] https://patchwork.kernel.org/patch/7389591/
>
> Hmm so is this with am335x SoC glue or something else?
I've found the following comment in drivers/usb/musb/musb_host.c [1]:
/*
* FIXME: sometimes the tx fifo flush failed, it has been
* observed during device disconnect on AM335x.
*
* To reproduce the issue, ensure tx urb(s) are queued when
* unplug the usb device which is connected to AM335x usb
* host port.
*
* I found using a usb-ethernet device and running iperf
* (client on AM335x) has very high chance to trigger it.
*
* Better to turn on musb_dbg() in musb_cleanup_urb() with
* CPPI enabled to see the issue when aborting the tx channel.
*/
So the issue is already known but so far unresolved :-(
[1] https://github.com/torvalds/linux/blob/master/drivers/usb/musb/musb_host.c#L100
Regards,
Yegor
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2019-09-24 7:02 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-08-21 8:23 musb: Could not flush host TX2 fifo: csr: 2403 Yegor Yefremov
2019-09-23 17:45 ` Tony Lindgren
2019-09-24 7:02 ` Yegor Yefremov
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).