* 5.3.6: I/O error on writing SD card via USB3
@ 2019-10-19 4:26 Harald Dunkel
2019-10-19 14:57 ` Alan Stern
0 siblings, 1 reply; 6+ messages in thread
From: Harald Dunkel @ 2019-10-19 4:26 UTC (permalink / raw)
To: USB list
[-- Attachment #1: Type: text/plain, Size: 549 bytes --]
Hi folks,
I've got an USB3 SD card adapter (device info attached). Problem:
Writing a (rather slow 133x) SD card via an USB3 slot I get I/O errors,
see attached kern.log. If I use an USB2 slot, then there is no problem
(not shown here).
The I/O errors don't come up immediately, but after a few minutes
writing time, so I wonder if this is a heat problem?
Since modern PCs don't have USB2 slots anymore I would be highly
interested in a workaround. Kernel is 5.3.6 built from the git
repository.
Every helpful hint is highly appreciated.
Harri
[-- Attachment #2: lsusb.txt --]
[-- Type: text/plain, Size: 2837 bytes --]
Bus 004 Device 004: ID 8564:4000 Transcend Information, Inc. RDF8
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.10
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x8564 Transcend Information, Inc.
idProduct 0x4000 RDF8
bcdDevice 0.08
iManufacturer 3 Genesys
iProduct 4 GL3220
iSerial 5 000000059
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x0020
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk-Only
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Binary Object Store Descriptor:
bLength 5
bDescriptorType 15
wTotalLength 0x0016
bNumDeviceCaps 2
USB 2.0 Extension Device Capability:
bLength 7
bDescriptorType 16
bDevCapabilityType 2
bmAttributes 0x00000002
HIRD Link Power Management (LPM) Supported
SuperSpeed USB Device Capability:
bLength 10
bDescriptorType 16
bDevCapabilityType 3
bmAttributes 0x00
wSpeedsSupported 0x000e
Device can operate at Full Speed (12Mbps)
Device can operate at High Speed (480Mbps)
Device can operate at SuperSpeed (5Gbps)
bFunctionalitySupport 1
Lowest fully-functional device speed is Full Speed (12Mbps)
bU1DevExitLat 10 micro seconds
bU2DevExitLat 2047 micro seconds
Device Status: 0x0000
(Bus Powered)
[-- Attachment #3: kern.log.txt --]
[-- Type: text/plain, Size: 93372 bytes --]
Oct 18 21:26:33 cecil kernel: [ 0.000000] Linux version 5.3.6-raw (harri@sylvester.afaics.de) (gcc version 9.2.1 20191008 (Debian 9.2.1-9)) #1 SMP PREEMPT Fri Oct 11 22:07:13 CEST 2019
Oct 18 21:26:33 cecil kernel: [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.3.6-raw root=UUID=d6b6d2f3-8213-4221-9a69-df7dc69acc45 ro net.ifnames=0 vsyscall=emulate
Oct 18 21:26:33 cecil kernel: [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
Oct 18 21:26:33 cecil kernel: [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
Oct 18 21:26:33 cecil kernel: [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
Oct 18 21:26:33 cecil kernel: [ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
Oct 18 21:26:33 cecil kernel: [ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
Oct 18 21:26:33 cecil kernel: [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
Oct 18 21:26:33 cecil kernel: [ 0.000000] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64
Oct 18 21:26:33 cecil kernel: [ 0.000000] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64
Oct 18 21:26:33 cecil kernel: [ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
Oct 18 21:26:33 cecil kernel: [ 0.000000] BIOS-provided physical RAM map:
Oct 18 21:26:33 cecil kernel: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
Oct 18 21:26:33 cecil kernel: [ 0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
Oct 18 21:26:33 cecil kernel: [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
Oct 18 21:26:33 cecil kernel: [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000008cc35fff] usable
Oct 18 21:26:33 cecil kernel: [ 0.000000] BIOS-e820: [mem 0x000000008cc36000-0x000000008e47dfff] reserved
Oct 18 21:26:33 cecil kernel: [ 0.000000] BIOS-e820: [mem 0x000000008e47e000-0x000000008e7b4fff] ACPI data
Oct 18 21:26:33 cecil kernel: [ 0.000000] BIOS-e820: [mem 0x000000008e7b5000-0x000000008ec00fff] ACPI NVS
Oct 18 21:26:33 cecil kernel: [ 0.000000] BIOS-e820: [mem 0x000000008ec01000-0x000000008f40efff] reserved
Oct 18 21:26:33 cecil kernel: [ 0.000000] BIOS-e820: [mem 0x000000008f40f000-0x000000008f40ffff] usable
Oct 18 21:26:33 cecil kernel: [ 0.000000] BIOS-e820: [mem 0x000000008f410000-0x000000008fffffff] reserved
Oct 18 21:26:33 cecil kernel: [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
Oct 18 21:26:33 cecil kernel: [ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
Oct 18 21:26:33 cecil kernel: [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
Oct 18 21:26:33 cecil kernel: [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
Oct 18 21:26:33 cecil kernel: [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
Oct 18 21:26:33 cecil kernel: [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
Oct 18 21:26:33 cecil kernel: [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000086dffffff] usable
Oct 18 21:26:33 cecil kernel: [ 0.000000] NX (Execute Disable) protection: active
Oct 18 21:26:33 cecil kernel: [ 0.000000] SMBIOS 3.2.1 present.
Oct 18 21:26:33 cecil kernel: [ 0.000000] DMI: System manufacturer System Product Name/TUF Z390M-PRO GAMING (WI-FI), BIOS 2417 06/03/2019
Oct 18 21:26:33 cecil kernel: [ 0.000000] tsc: Detected 3600.000 MHz processor
Oct 18 21:26:33 cecil kernel: [ 0.000846] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
Oct 18 21:26:33 cecil kernel: [ 0.000847] e820: remove [mem 0x000a0000-0x000fffff] usable
Oct 18 21:26:33 cecil kernel: [ 0.000851] last_pfn = 0x86e000 max_arch_pfn = 0x400000000
Oct 18 21:26:33 cecil kernel: [ 0.000853] MTRR default type: write-back
Oct 18 21:26:33 cecil kernel: [ 0.000853] MTRR fixed ranges enabled:
Oct 18 21:26:33 cecil kernel: [ 0.000854] 00000-9FFFF write-back
Oct 18 21:26:33 cecil kernel: [ 0.000854] A0000-BFFFF uncachable
Oct 18 21:26:33 cecil kernel: [ 0.000855] C0000-FFFFF write-protect
Oct 18 21:26:33 cecil kernel: [ 0.000855] MTRR variable ranges enabled:
Oct 18 21:26:33 cecil kernel: [ 0.000856] 0 base 00C0000000 mask 7FC0000000 uncachable
Oct 18 21:26:33 cecil kernel: [ 0.000857] 1 base 00A0000000 mask 7FE0000000 uncachable
Oct 18 21:26:33 cecil kernel: [ 0.000857] 2 base 0090000000 mask 7FF0000000 uncachable
Oct 18 21:26:33 cecil kernel: [ 0.000858] 3 base 2000000000 mask 6000000000 uncachable
Oct 18 21:26:33 cecil kernel: [ 0.000858] 4 base 1000000000 mask 7000000000 uncachable
Oct 18 21:26:33 cecil kernel: [ 0.000858] 5 base 4000000000 mask 4000000000 uncachable
Oct 18 21:26:33 cecil kernel: [ 0.000859] 6 disabled
Oct 18 21:26:33 cecil kernel: [ 0.000859] 7 disabled
Oct 18 21:26:33 cecil kernel: [ 0.000859] 8 disabled
Oct 18 21:26:33 cecil kernel: [ 0.000859] 9 disabled
Oct 18 21:26:33 cecil kernel: [ 0.001109] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
Oct 18 21:26:33 cecil kernel: [ 0.001448] last_pfn = 0x8f410 max_arch_pfn = 0x400000000
Oct 18 21:26:33 cecil kernel: [ 0.006424] found SMP MP-table at [mem 0x000fcdc0-0x000fcdcf]
Oct 18 21:26:33 cecil kernel: [ 0.006481] Using GB pages for direct mapping
Oct 18 21:26:33 cecil kernel: [ 0.006483] BRK [0x02601000, 0x02601fff] PGTABLE
Oct 18 21:26:33 cecil kernel: [ 0.006484] BRK [0x02602000, 0x02602fff] PGTABLE
Oct 18 21:26:33 cecil kernel: [ 0.006485] BRK [0x02603000, 0x02603fff] PGTABLE
Oct 18 21:26:33 cecil kernel: [ 0.006510] BRK [0x02604000, 0x02604fff] PGTABLE
Oct 18 21:26:33 cecil kernel: [ 0.006708] BRK [0x02605000, 0x02605fff] PGTABLE
Oct 18 21:26:33 cecil kernel: [ 0.006768] RAMDISK: [mem 0x33f9f000-0x35fc6fff]
Oct 18 21:26:33 cecil kernel: [ 0.006776] ACPI: Early table checksum verification disabled
Oct 18 21:26:33 cecil kernel: [ 0.006778] ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
Oct 18 21:26:33 cecil kernel: [ 0.006780] ACPI: XSDT 0x000000008E7510A8 0000CC (v01 ALASKA A M I 01072009 AMI 00010013)
Oct 18 21:26:33 cecil kernel: [ 0.006784] ACPI: FACP 0x000000008E7916D0 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
Oct 18 21:26:33 cecil kernel: [ 0.006787] ACPI: DSDT 0x000000008E751210 0404C0 (v02 ALASKA A M I 01072009 INTL 20160527)
Oct 18 21:26:33 cecil kernel: [ 0.006789] ACPI: FACS 0x000000008EC00080 000040
Oct 18 21:26:33 cecil kernel: [ 0.006791] ACPI: APIC 0x000000008E7917E8 0000BC (v04 ALASKA A M I 01072009 AMI 00010013)
Oct 18 21:26:33 cecil kernel: [ 0.006792] ACPI: FPDT 0x000000008E7918A8 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
Oct 18 21:26:33 cecil kernel: [ 0.006794] ACPI: FIDT 0x000000008E7918F0 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
Oct 18 21:26:33 cecil kernel: [ 0.006796] ACPI: MCFG 0x000000008E791990 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
Oct 18 21:26:33 cecil kernel: [ 0.006797] ACPI: WSMT 0x000000008E7A2400 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
Oct 18 21:26:33 cecil kernel: [ 0.006799] ACPI: SSDT 0x000000008E791A28 001B1C (v02 CpuRef CpuSsdt 00003000 INTL 20160527)
Oct 18 21:26:33 cecil kernel: [ 0.006801] ACPI: SSDT 0x000000008E793548 003099 (v02 SaSsdt SaSsdt 00003000 INTL 20160527)
Oct 18 21:26:33 cecil kernel: [ 0.006803] ACPI: SSDT 0x000000008E7965E8 00232B (v02 PegSsd PegSsdt 00001000 INTL 20160527)
Oct 18 21:26:33 cecil kernel: [ 0.006804] ACPI: HPET 0x000000008E798918 000038 (v01 ALASKA A M I 00000002 01000013)
Oct 18 21:26:33 cecil kernel: [ 0.006806] ACPI: SSDT 0x000000008E798950 000FAE (v02 ALASKA Ther_Rvp 00001000 INTL 20160527)
Oct 18 21:26:33 cecil kernel: [ 0.006808] ACPI: SSDT 0x000000008E799900 002FD3 (v02 INTEL xh_cfsd4 00000000 INTL 20160527)
Oct 18 21:26:33 cecil kernel: [ 0.006810] ACPI: UEFI 0x000000008E79C8D8 000042 (v01 ALASKA A M I 00000002 01000013)
Oct 18 21:26:33 cecil kernel: [ 0.006811] ACPI: LPIT 0x000000008E79C920 000094 (v01 ALASKA A M I 00000002 01000013)
Oct 18 21:26:33 cecil kernel: [ 0.006813] ACPI: SSDT 0x000000008E79C9B8 0027DE (v02 ALASKA PtidDevc 00001000 INTL 20160527)
Oct 18 21:26:33 cecil kernel: [ 0.006815] ACPI: SSDT 0x000000008E79F198 0014E2 (v02 ALASKA TbtTypeC 00000000 INTL 20160527)
Oct 18 21:26:33 cecil kernel: [ 0.006817] ACPI: DBGP 0x000000008E7A0680 000034 (v01 ALASKA A M I 00000002 01000013)
Oct 18 21:26:33 cecil kernel: [ 0.006818] ACPI: DBG2 0x000000008E7A06B8 000054 (v00 ALASKA A M I 00000002 01000013)
Oct 18 21:26:33 cecil kernel: [ 0.006820] ACPI: SSDT 0x000000008E7A0710 001B67 (v02 ALASKA UsbCTabl 00001000 INTL 20160527)
Oct 18 21:26:33 cecil kernel: [ 0.006822] ACPI: SSDT 0x000000008E7A2278 000144 (v02 Intel ADebTabl 00001000 INTL 20160527)
Oct 18 21:26:33 cecil kernel: [ 0.006823] ACPI: WPBT 0x000000008E7A23C0 00003C (v01 ALASKA A M I 00000001 ASUS 00000001)
Oct 18 21:26:33 cecil kernel: [ 0.006827] ACPI: Local APIC address 0xfee00000
Oct 18 21:26:33 cecil kernel: [ 0.007195] No NUMA configuration found
Oct 18 21:26:33 cecil kernel: [ 0.007196] Faking a node at [mem 0x0000000000000000-0x000000086dffffff]
Oct 18 21:26:33 cecil kernel: [ 0.007198] NODE_DATA(0) allocated [mem 0x86dffa000-0x86dffdfff]
Oct 18 21:26:33 cecil kernel: [ 0.007224] Zone ranges:
Oct 18 21:26:33 cecil kernel: [ 0.007224] DMA [mem 0x0000000000001000-0x0000000000ffffff]
Oct 18 21:26:33 cecil kernel: [ 0.007225] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Oct 18 21:26:33 cecil kernel: [ 0.007226] Normal [mem 0x0000000100000000-0x000000086dffffff]
Oct 18 21:26:33 cecil kernel: [ 0.007227] Movable zone start for each node
Oct 18 21:26:33 cecil kernel: [ 0.007227] Early memory node ranges
Oct 18 21:26:33 cecil kernel: [ 0.007228] node 0: [mem 0x0000000000001000-0x000000000009cfff]
Oct 18 21:26:33 cecil kernel: [ 0.007229] node 0: [mem 0x0000000000100000-0x000000008cc35fff]
Oct 18 21:26:33 cecil kernel: [ 0.007229] node 0: [mem 0x000000008f40f000-0x000000008f40ffff]
Oct 18 21:26:33 cecil kernel: [ 0.007230] node 0: [mem 0x0000000100000000-0x000000086dffffff]
Oct 18 21:26:33 cecil kernel: [ 0.007307] Zeroed struct page in unavailable ranges: 13357 pages
Oct 18 21:26:33 cecil kernel: [ 0.007307] Initmem setup node 0 [mem 0x0000000000001000-0x000000086dffffff]
Oct 18 21:26:33 cecil kernel: [ 0.007309] On node 0 totalpages: 8367059
Oct 18 21:26:33 cecil kernel: [ 0.007309] DMA zone: 64 pages used for memmap
Oct 18 21:26:33 cecil kernel: [ 0.007310] DMA zone: 21 pages reserved
Oct 18 21:26:33 cecil kernel: [ 0.007310] DMA zone: 3996 pages, LIFO batch:0
Oct 18 21:26:33 cecil kernel: [ 0.007349] DMA32 zone: 8945 pages used for memmap
Oct 18 21:26:33 cecil kernel: [ 0.007350] DMA32 zone: 572471 pages, LIFO batch:63
Oct 18 21:26:33 cecil kernel: [ 0.014368] Normal zone: 121728 pages used for memmap
Oct 18 21:26:33 cecil kernel: [ 0.014368] Normal zone: 7790592 pages, LIFO batch:63
Oct 18 21:26:33 cecil kernel: [ 0.085403] ACPI: PM-Timer IO Port: 0x1808
Oct 18 21:26:33 cecil kernel: [ 0.085404] ACPI: Local APIC address 0xfee00000
Oct 18 21:26:33 cecil kernel: [ 0.085408] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
Oct 18 21:26:33 cecil kernel: [ 0.085408] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
Oct 18 21:26:33 cecil kernel: [ 0.085409] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
Oct 18 21:26:33 cecil kernel: [ 0.085409] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
Oct 18 21:26:33 cecil kernel: [ 0.085410] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
Oct 18 21:26:33 cecil kernel: [ 0.085410] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
Oct 18 21:26:33 cecil kernel: [ 0.085411] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
Oct 18 21:26:33 cecil kernel: [ 0.085412] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
Oct 18 21:26:33 cecil kernel: [ 0.085473] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
Oct 18 21:26:33 cecil kernel: [ 0.085474] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Oct 18 21:26:33 cecil kernel: [ 0.085475] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Oct 18 21:26:33 cecil kernel: [ 0.085476] ACPI: IRQ0 used by override.
Oct 18 21:26:33 cecil kernel: [ 0.085477] ACPI: IRQ9 used by override.
Oct 18 21:26:33 cecil kernel: [ 0.085478] Using ACPI (MADT) for SMP configuration information
Oct 18 21:26:33 cecil kernel: [ 0.085479] ACPI: HPET id: 0x8086a201 base: 0xfed00000
Oct 18 21:26:33 cecil kernel: [ 0.085481] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
Oct 18 21:26:33 cecil kernel: [ 0.085490] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
Oct 18 21:26:33 cecil kernel: [ 0.085491] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
Oct 18 21:26:33 cecil kernel: [ 0.085491] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
Oct 18 21:26:33 cecil kernel: [ 0.085492] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
Oct 18 21:26:33 cecil kernel: [ 0.085492] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
Oct 18 21:26:33 cecil kernel: [ 0.085493] PM: Registered nosave memory: [mem 0x8cc36000-0x8e47dfff]
Oct 18 21:26:33 cecil kernel: [ 0.085494] PM: Registered nosave memory: [mem 0x8e47e000-0x8e7b4fff]
Oct 18 21:26:33 cecil kernel: [ 0.085494] PM: Registered nosave memory: [mem 0x8e7b5000-0x8ec00fff]
Oct 18 21:26:33 cecil kernel: [ 0.085495] PM: Registered nosave memory: [mem 0x8ec01000-0x8f40efff]
Oct 18 21:26:33 cecil kernel: [ 0.085496] PM: Registered nosave memory: [mem 0x8f410000-0x8fffffff]
Oct 18 21:26:33 cecil kernel: [ 0.085496] PM: Registered nosave memory: [mem 0x90000000-0xdfffffff]
Oct 18 21:26:33 cecil kernel: [ 0.085497] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
Oct 18 21:26:33 cecil kernel: [ 0.085497] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
Oct 18 21:26:33 cecil kernel: [ 0.085498] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
Oct 18 21:26:33 cecil kernel: [ 0.085499] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
Oct 18 21:26:33 cecil kernel: [ 0.085499] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
Oct 18 21:26:33 cecil kernel: [ 0.085500] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
Oct 18 21:26:33 cecil kernel: [ 0.085500] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
Oct 18 21:26:33 cecil kernel: [ 0.085501] PM: Registered nosave memory: [mem 0xfed04000-0xfedfffff]
Oct 18 21:26:33 cecil kernel: [ 0.085501] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
Oct 18 21:26:33 cecil kernel: [ 0.085502] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
Oct 18 21:26:33 cecil kernel: [ 0.085502] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
Oct 18 21:26:33 cecil kernel: [ 0.085503] [mem 0x90000000-0xdfffffff] available for PCI devices
Oct 18 21:26:33 cecil kernel: [ 0.085504] Booting paravirtualized kernel on bare hardware
Oct 18 21:26:33 cecil kernel: [ 0.085506] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
Oct 18 21:26:33 cecil kernel: [ 0.138051] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
Oct 18 21:26:33 cecil kernel: [ 0.138173] percpu: Embedded 52 pages/cpu s173208 r8192 d31592 u262144
Oct 18 21:26:33 cecil kernel: [ 0.138177] pcpu-alloc: s173208 r8192 d31592 u262144 alloc=1*2097152
Oct 18 21:26:33 cecil kernel: [ 0.138177] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Oct 18 21:26:33 cecil kernel: [ 0.138190] Built 1 zonelists, mobility grouping on. Total pages: 8236301
Oct 18 21:26:33 cecil kernel: [ 0.138190] Policy zone: Normal
Oct 18 21:26:33 cecil kernel: [ 0.138191] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.3.6-raw root=UUID=d6b6d2f3-8213-4221-9a69-df7dc69acc45 ro net.ifnames=0 vsyscall=emulate
Oct 18 21:26:33 cecil kernel: [ 0.138223] printk: log_buf_len individual max cpu contribution: 262144 bytes
Oct 18 21:26:33 cecil kernel: [ 0.138224] printk: log_buf_len total cpu_extra contributions: 1835008 bytes
Oct 18 21:26:33 cecil kernel: [ 0.138225] printk: log_buf_len min size: 131072 bytes
Oct 18 21:26:33 cecil kernel: [ 0.138306] printk: log_buf_len: 2097152 bytes
Oct 18 21:26:33 cecil kernel: [ 0.138307] printk: early log buf free: 119072(90%)
Oct 18 21:26:33 cecil kernel: [ 0.139538] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
Oct 18 21:26:33 cecil kernel: [ 0.140142] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
Oct 18 21:26:33 cecil kernel: [ 0.140186] mem auto-init: stack:off, heap alloc:off, heap free:off
Oct 18 21:26:33 cecil kernel: [ 0.142659] Calgary: detecting Calgary via BIOS EBDA area
Oct 18 21:26:33 cecil kernel: [ 0.142660] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Oct 18 21:26:33 cecil kernel: [ 0.195033] Memory: 32769448K/33468236K available (10244K kernel code, 915K rwdata, 2208K rodata, 1188K init, 1016K bss, 698788K reserved, 0K cma-reserved)
Oct 18 21:26:33 cecil kernel: [ 0.195145] rcu: Preemptible hierarchical RCU implementation.
Oct 18 21:26:33 cecil kernel: [ 0.195146] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
Oct 18 21:26:33 cecil kernel: [ 0.195147] Tasks RCU enabled.
Oct 18 21:26:33 cecil kernel: [ 0.195147] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
Oct 18 21:26:33 cecil kernel: [ 0.195148] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
Oct 18 21:26:33 cecil kernel: [ 0.195240] NR_IRQS: 33024, nr_irqs: 2048, preallocated irqs: 16
Oct 18 21:26:33 cecil kernel: [ 0.195750] random: crng done (trusting CPU's manufacturer)
Oct 18 21:26:33 cecil kernel: [ 0.195831] Console: colour dummy device 80x25
Oct 18 21:26:33 cecil kernel: [ 0.196007] printk: console [tty0] enabled
Oct 18 21:26:33 cecil kernel: [ 0.196024] ACPI: Core revision 20190703
Oct 18 21:26:33 cecil kernel: [ 0.196405] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
Oct 18 21:26:33 cecil kernel: [ 0.196548] APIC: Switch to symmetric I/O mode setup
Oct 18 21:26:33 cecil kernel: [ 0.199503] x2apic: IRQ remapping doesn't support X2APIC mode
Oct 18 21:26:33 cecil kernel: [ 0.208974] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
Oct 18 21:26:33 cecil kernel: [ 0.213500] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x33e452fbb2f, max_idle_ns: 440795236593 ns
Oct 18 21:26:33 cecil kernel: [ 0.213503] Calibrating delay loop (skipped), value calculated using timer frequency.. 7200.00 BogoMIPS (lpj=3600000)
Oct 18 21:26:33 cecil kernel: [ 0.213507] pid_max: default: 32768 minimum: 301
Oct 18 21:26:33 cecil kernel: [ 0.213531] LSM: Security Framework initializing
Oct 18 21:26:33 cecil kernel: [ 0.213534] Yama: becoming mindful.
Oct 18 21:26:33 cecil kernel: [ 0.213587] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
Oct 18 21:26:33 cecil kernel: [ 0.213629] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
Oct 18 21:26:33 cecil kernel: [ 0.213725] *** VALIDATE proc ***
Oct 18 21:26:33 cecil kernel: [ 0.213756] *** VALIDATE cgroup1 ***
Oct 18 21:26:33 cecil kernel: [ 0.213758] *** VALIDATE cgroup2 ***
Oct 18 21:26:33 cecil kernel: [ 0.213792] mce: CPU0: Thermal monitoring enabled (TM1)
Oct 18 21:26:33 cecil kernel: [ 0.213815] process: using mwait in idle threads
Oct 18 21:26:33 cecil kernel: [ 0.213818] Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8
Oct 18 21:26:33 cecil kernel: [ 0.213820] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Oct 18 21:26:33 cecil kernel: [ 0.213822] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Oct 18 21:26:33 cecil kernel: [ 0.213824] Spectre V2 : Mitigation: Enhanced IBRS
Oct 18 21:26:33 cecil kernel: [ 0.213825] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Oct 18 21:26:33 cecil kernel: [ 0.213828] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Oct 18 21:26:33 cecil kernel: [ 0.213830] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
Oct 18 21:26:33 cecil kernel: [ 0.213986] Freeing SMP alternatives memory: 28K
Oct 18 21:26:33 cecil kernel: [ 0.214550] TSC deadline timer enabled
Oct 18 21:26:33 cecil kernel: [ 0.214562] smpboot: CPU0: Intel(R) Core(TM) i7-9700K CPU @ 3.60GHz (family: 0x6, model: 0x9e, stepping: 0xd)
Oct 18 21:26:33 cecil kernel: [ 0.220507] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
Oct 18 21:26:33 cecil kernel: [ 0.220514] ... version: 4
Oct 18 21:26:33 cecil kernel: [ 0.220515] ... bit width: 48
Oct 18 21:26:33 cecil kernel: [ 0.220516] ... generic registers: 8
Oct 18 21:26:33 cecil kernel: [ 0.220517] ... value mask: 0000ffffffffffff
Oct 18 21:26:33 cecil kernel: [ 0.220518] ... max period: 00007fffffffffff
Oct 18 21:26:33 cecil kernel: [ 0.220519] ... fixed-purpose events: 3
Oct 18 21:26:33 cecil kernel: [ 0.220520] ... event mask: 00000007000000ff
Oct 18 21:26:33 cecil kernel: [ 0.222504] rcu: Hierarchical SRCU implementation.
Oct 18 21:26:33 cecil kernel: [ 0.224722] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
Oct 18 21:26:33 cecil kernel: [ 0.226506] smp: Bringing up secondary CPUs ...
Oct 18 21:26:33 cecil kernel: [ 0.234521] x86: Booting SMP configuration:
Oct 18 21:26:33 cecil kernel: [ 0.234523] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
Oct 18 21:26:33 cecil kernel: [ 0.283178] smp: Brought up 1 node, 8 CPUs
Oct 18 21:26:33 cecil kernel: [ 0.283178] smpboot: Max logical packages: 1
Oct 18 21:26:33 cecil kernel: [ 0.283178] smpboot: Total of 8 processors activated (57600.00 BogoMIPS)
Oct 18 21:26:33 cecil kernel: [ 0.284002] devtmpfs: initialized
Oct 18 21:26:33 cecil kernel: [ 0.284002] x86/mm: Memory block size: 128MB
Oct 18 21:26:33 cecil kernel: [ 0.287011] PM: Registering ACPI NVS region [mem 0x8e7b5000-0x8ec00fff] (4505600 bytes)
Oct 18 21:26:33 cecil kernel: [ 0.287011] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
Oct 18 21:26:33 cecil kernel: [ 0.287011] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
Oct 18 21:26:33 cecil kernel: [ 0.287011] prandom: seed boundary self test passed
Oct 18 21:26:33 cecil kernel: [ 0.287011] prandom: 100 self tests passed
Oct 18 21:26:33 cecil kernel: [ 0.287011] pinctrl core: initialized pinctrl subsystem
Oct 18 21:26:33 cecil kernel: [ 0.287542] NET: Registered protocol family 16
Oct 18 21:26:33 cecil kernel: [ 0.287593] audit: initializing netlink subsys (disabled)
Oct 18 21:26:33 cecil kernel: [ 0.287597] audit: type=2000 audit(1571426751.083:1): state=initialized audit_enabled=0 res=1
Oct 18 21:26:33 cecil kernel: [ 0.287597] cpuidle: using governor ladder
Oct 18 21:26:33 cecil kernel: [ 0.287597] cpuidle: using governor menu
Oct 18 21:26:33 cecil kernel: [ 0.287597] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
Oct 18 21:26:33 cecil kernel: [ 0.287597] ACPI: bus type PCI registered
Oct 18 21:26:33 cecil kernel: [ 0.287597] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
Oct 18 21:26:33 cecil kernel: [ 0.287597] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
Oct 18 21:26:33 cecil kernel: [ 0.287597] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
Oct 18 21:26:33 cecil kernel: [ 0.287597] PCI: Using configuration type 1 for base access
Oct 18 21:26:33 cecil kernel: [ 0.289677] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
Oct 18 21:26:33 cecil kernel: [ 0.289980] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
Oct 18 21:26:33 cecil kernel: [ 0.289980] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
Oct 18 21:26:33 cecil kernel: [ 0.455538] ACPI: Added _OSI(Module Device)
Oct 18 21:26:33 cecil kernel: [ 0.455540] ACPI: Added _OSI(Processor Device)
Oct 18 21:26:33 cecil kernel: [ 0.455542] ACPI: Added _OSI(3.0 _SCP Extensions)
Oct 18 21:26:33 cecil kernel: [ 0.455543] ACPI: Added _OSI(Processor Aggregator Device)
Oct 18 21:26:33 cecil kernel: [ 0.455544] ACPI: Added _OSI(Linux-Dell-Video)
Oct 18 21:26:33 cecil kernel: [ 0.455546] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
Oct 18 21:26:33 cecil kernel: [ 0.455547] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
Oct 18 21:26:33 cecil kernel: [ 0.496991] ACPI: 10 ACPI AML tables successfully acquired and loaded
Oct 18 21:26:33 cecil kernel: [ 0.502514] ACPI: Dynamic OEM Table Load:
Oct 18 21:26:33 cecil kernel: [ 0.502519] ACPI: SSDT 0xFFFF88884980A400 0000F4 (v02 PmRef Cpu0Psd 00003000 INTL 20160527)
Oct 18 21:26:33 cecil kernel: [ 0.503390] ACPI: \_SB_.PR00: _OSC native thermal LVT Acked
Oct 18 21:26:33 cecil kernel: [ 0.504340] ACPI: Dynamic OEM Table Load:
Oct 18 21:26:33 cecil kernel: [ 0.504345] ACPI: SSDT 0xFFFF888849964C00 000400 (v02 PmRef Cpu0Cst 00003001 INTL 20160527)
Oct 18 21:26:33 cecil kernel: [ 0.505270] ACPI: Dynamic OEM Table Load:
Oct 18 21:26:33 cecil kernel: [ 0.505274] ACPI: SSDT 0xFFFF8888499E9000 0006CB (v02 PmRef Cpu0Ist 00003000 INTL 20160527)
Oct 18 21:26:33 cecil kernel: [ 0.506264] ACPI: Dynamic OEM Table Load:
Oct 18 21:26:33 cecil kernel: [ 0.506268] ACPI: SSDT 0xFFFF8888499E8C00 000133 (v02 PmRef Cpu0Hwp 00003000 INTL 20160527)
Oct 18 21:26:33 cecil kernel: [ 0.507132] ACPI: Dynamic OEM Table Load:
Oct 18 21:26:33 cecil kernel: [ 0.507137] ACPI: SSDT 0xFFFF8888498A2800 000724 (v02 PmRef HwpLvt 00003000 INTL 20160527)
Oct 18 21:26:33 cecil kernel: [ 0.508167] ACPI: Dynamic OEM Table Load:
Oct 18 21:26:33 cecil kernel: [ 0.508171] ACPI: SSDT 0xFFFF8888498A2000 0005FC (v02 PmRef ApIst 00003000 INTL 20160527)
Oct 18 21:26:33 cecil kernel: [ 0.509146] ACPI: Dynamic OEM Table Load:
Oct 18 21:26:33 cecil kernel: [ 0.509149] ACPI: SSDT 0xFFFF888849964400 000317 (v02 PmRef ApHwp 00003000 INTL 20160527)
Oct 18 21:26:33 cecil kernel: [ 0.510105] ACPI: Dynamic OEM Table Load:
Oct 18 21:26:33 cecil kernel: [ 0.510110] ACPI: SSDT 0xFFFF8888498A5000 000AB0 (v02 PmRef ApPsd 00003000 INTL 20160527)
Oct 18 21:26:33 cecil kernel: [ 0.511376] ACPI: Dynamic OEM Table Load:
Oct 18 21:26:33 cecil kernel: [ 0.511381] ACPI: SSDT 0xFFFF888849964000 00030A (v02 PmRef ApCst 00003000 INTL 20160527)
Oct 18 21:26:33 cecil kernel: [ 0.514883] ACPI: Interpreter enabled
Oct 18 21:26:33 cecil kernel: [ 0.514907] ACPI: (supports S0 S3 S4 S5)
Oct 18 21:26:33 cecil kernel: [ 0.514908] ACPI: Using IOAPIC for interrupt routing
Oct 18 21:26:33 cecil kernel: [ 0.514932] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
Oct 18 21:26:33 cecil kernel: [ 0.515697] ACPI: Enabled 7 GPEs in block 00 to 7F
Oct 18 21:26:33 cecil kernel: [ 0.525296] ACPI: Power Resource [USBC] (on)
Oct 18 21:26:33 cecil kernel: [ 0.527900] ACPI: Power Resource [V0PR] (on)
Oct 18 21:26:33 cecil kernel: [ 0.528150] ACPI: Power Resource [V1PR] (on)
Oct 18 21:26:33 cecil kernel: [ 0.528394] ACPI: Power Resource [V2PR] (on)
Oct 18 21:26:33 cecil kernel: [ 0.532238] ACPI: Power Resource [WRST] (on)
Oct 18 21:26:33 cecil kernel: [ 0.535777] ACPI: Power Resource [FN00] (off)
Oct 18 21:26:33 cecil kernel: [ 0.535840] ACPI: Power Resource [FN01] (off)
Oct 18 21:26:33 cecil kernel: [ 0.535901] ACPI: Power Resource [FN02] (off)
Oct 18 21:26:33 cecil kernel: [ 0.535959] ACPI: Power Resource [FN03] (off)
Oct 18 21:26:33 cecil kernel: [ 0.536018] ACPI: Power Resource [FN04] (off)
Oct 18 21:26:33 cecil kernel: [ 0.536610] ACPI: Power Resource [PIN] (off)
Oct 18 21:26:33 cecil kernel: [ 0.536913] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
Oct 18 21:26:33 cecil kernel: [ 0.536918] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
Oct 18 21:26:33 cecil kernel: [ 0.537033] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
Oct 18 21:26:33 cecil kernel: [ 0.537139] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR]
Oct 18 21:26:33 cecil kernel: [ 0.537140] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
Oct 18 21:26:33 cecil kernel: [ 0.537853] PCI host bridge to bus 0000:00
Oct 18 21:26:33 cecil kernel: [ 0.537856] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
Oct 18 21:26:33 cecil kernel: [ 0.537857] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
Oct 18 21:26:33 cecil kernel: [ 0.537859] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
Oct 18 21:26:33 cecil kernel: [ 0.537861] pci_bus 0000:00: root bus resource [mem 0x90000000-0xdfffffff window]
Oct 18 21:26:33 cecil kernel: [ 0.537863] pci_bus 0000:00: root bus resource [mem 0xfc800000-0xfe7fffff window]
Oct 18 21:26:33 cecil kernel: [ 0.537864] pci_bus 0000:00: root bus resource [bus 00-fe]
Oct 18 21:26:33 cecil kernel: [ 0.537872] pci 0000:00:00.0: [8086:3e30] type 00 class 0x060000
Oct 18 21:26:33 cecil kernel: [ 0.538111] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
Oct 18 21:26:33 cecil kernel: [ 0.538145] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
Oct 18 21:26:33 cecil kernel: [ 0.538259] pci 0000:00:01.1: [8086:1905] type 01 class 0x060400
Oct 18 21:26:33 cecil kernel: [ 0.538291] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
Oct 18 21:26:33 cecil kernel: [ 0.538634] pci 0000:00:14.0: [8086:a36d] type 00 class 0x0c0330
Oct 18 21:26:33 cecil kernel: [ 0.538670] pci 0000:00:14.0: reg 0x10: [mem 0xa3320000-0xa332ffff 64bit]
Oct 18 21:26:33 cecil kernel: [ 0.538773] pci 0000:00:14.0: PME# supported from D3hot D3cold
Oct 18 21:26:33 cecil kernel: [ 0.539041] pci 0000:00:14.2: [8086:a36f] type 00 class 0x050000
Oct 18 21:26:33 cecil kernel: [ 0.539072] pci 0000:00:14.2: reg 0x10: [mem 0xa333a000-0xa333bfff 64bit]
Oct 18 21:26:33 cecil kernel: [ 0.539089] pci 0000:00:14.2: reg 0x18: [mem 0xa3340000-0xa3340fff 64bit]
Oct 18 21:26:33 cecil kernel: [ 0.539307] pci 0000:00:14.3: [8086:a370] type 00 class 0x028000
Oct 18 21:26:33 cecil kernel: [ 0.539498] pci 0000:00:14.3: reg 0x10: [mem 0xa3334000-0xa3337fff 64bit]
Oct 18 21:26:33 cecil kernel: [ 0.540157] pci 0000:00:14.3: PME# supported from D0 D3hot D3cold
Oct 18 21:26:33 cecil kernel: [ 0.540435] pci 0000:00:16.0: [8086:a360] type 00 class 0x078000
Oct 18 21:26:33 cecil kernel: [ 0.540469] pci 0000:00:16.0: reg 0x10: [mem 0xa333f000-0xa333ffff 64bit]
Oct 18 21:26:33 cecil kernel: [ 0.540572] pci 0000:00:16.0: PME# supported from D3hot
Oct 18 21:26:33 cecil kernel: [ 0.540784] pci 0000:00:17.0: [8086:a352] type 00 class 0x010601
Oct 18 21:26:33 cecil kernel: [ 0.540813] pci 0000:00:17.0: reg 0x10: [mem 0xa3338000-0xa3339fff]
Oct 18 21:26:33 cecil kernel: [ 0.540824] pci 0000:00:17.0: reg 0x14: [mem 0xa333e000-0xa333e0ff]
Oct 18 21:26:33 cecil kernel: [ 0.540836] pci 0000:00:17.0: reg 0x18: [io 0x4050-0x4057]
Oct 18 21:26:33 cecil kernel: [ 0.540847] pci 0000:00:17.0: reg 0x1c: [io 0x4040-0x4043]
Oct 18 21:26:33 cecil kernel: [ 0.540859] pci 0000:00:17.0: reg 0x20: [io 0x4020-0x403f]
Oct 18 21:26:33 cecil kernel: [ 0.540870] pci 0000:00:17.0: reg 0x24: [mem 0xa333d000-0xa333d7ff]
Oct 18 21:26:33 cecil kernel: [ 0.540931] pci 0000:00:17.0: PME# supported from D3hot
Oct 18 21:26:33 cecil kernel: [ 0.541092] pci 0000:00:1b.0: [8086:a340] type 01 class 0x060400
Oct 18 21:26:33 cecil kernel: [ 0.541225] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
Oct 18 21:26:33 cecil kernel: [ 0.541447] pci 0000:00:1c.0: [8086:a338] type 01 class 0x060400
Oct 18 21:26:33 cecil kernel: [ 0.541579] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
Oct 18 21:26:33 cecil kernel: [ 0.541798] pci 0000:00:1d.0: [8086:a330] type 01 class 0x060400
Oct 18 21:26:33 cecil kernel: [ 0.541943] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
Oct 18 21:26:33 cecil kernel: [ 0.542174] pci 0000:00:1f.0: [8086:a305] type 00 class 0x060100
Oct 18 21:26:33 cecil kernel: [ 0.542541] pci 0000:00:1f.3: [8086:a348] type 00 class 0x040300
Oct 18 21:26:33 cecil kernel: [ 0.542615] pci 0000:00:1f.3: reg 0x10: [mem 0xa3330000-0xa3333fff 64bit]
Oct 18 21:26:33 cecil kernel: [ 0.542696] pci 0000:00:1f.3: reg 0x20: [mem 0xa3100000-0xa31fffff 64bit]
Oct 18 21:26:33 cecil kernel: [ 0.542834] pci 0000:00:1f.3: PME# supported from D3hot D3cold
Oct 18 21:26:33 cecil kernel: [ 0.543283] pci 0000:00:1f.4: [8086:a323] type 00 class 0x0c0500
Oct 18 21:26:33 cecil kernel: [ 0.543330] pci 0000:00:1f.4: reg 0x10: [mem 0xa333c000-0xa333c0ff 64bit]
Oct 18 21:26:33 cecil kernel: [ 0.543381] pci 0000:00:1f.4: reg 0x20: [io 0xefa0-0xefbf]
Oct 18 21:26:33 cecil kernel: [ 0.543552] pci 0000:00:1f.5: [8086:a324] type 00 class 0x0c8000
Oct 18 21:26:33 cecil kernel: [ 0.543574] pci 0000:00:1f.5: reg 0x10: [mem 0xfe010000-0xfe010fff]
Oct 18 21:26:33 cecil kernel: [ 0.543740] pci 0000:00:1f.6: [8086:15bc] type 00 class 0x020000
Oct 18 21:26:33 cecil kernel: [ 0.543798] pci 0000:00:1f.6: reg 0x10: [mem 0xa3300000-0xa331ffff]
Oct 18 21:26:33 cecil kernel: [ 0.544035] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
Oct 18 21:26:33 cecil kernel: [ 0.544172] pci 0000:00:01.0: PCI bridge to [bus 01]
Oct 18 21:26:33 cecil kernel: [ 0.544203] pci 0000:02:00.0: [10de:1f82] type 00 class 0x030000
Oct 18 21:26:33 cecil kernel: [ 0.544221] pci 0000:02:00.0: reg 0x10: [mem 0xa2000000-0xa2ffffff]
Oct 18 21:26:33 cecil kernel: [ 0.544231] pci 0000:02:00.0: reg 0x14: [mem 0x90000000-0x9fffffff 64bit pref]
Oct 18 21:26:33 cecil kernel: [ 0.544240] pci 0000:02:00.0: reg 0x1c: [mem 0xa0000000-0xa1ffffff 64bit pref]
Oct 18 21:26:33 cecil kernel: [ 0.544246] pci 0000:02:00.0: reg 0x24: [io 0x3000-0x307f]
Oct 18 21:26:33 cecil kernel: [ 0.544253] pci 0000:02:00.0: reg 0x30: [mem 0xa3000000-0xa307ffff pref]
Oct 18 21:26:33 cecil kernel: [ 0.544298] pci 0000:02:00.0: PME# supported from D0 D3hot
Oct 18 21:26:33 cecil kernel: [ 0.544323] pci 0000:02:00.0: 16.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x8 link at 0000:00:01.1 (capable of 126.016 Gb/s with 8 GT/s x16 link)
Oct 18 21:26:33 cecil kernel: [ 0.544354] pci 0000:02:00.1: [10de:10fa] type 00 class 0x040300
Oct 18 21:26:33 cecil kernel: [ 0.544367] pci 0000:02:00.1: reg 0x10: [mem 0xa3080000-0xa3083fff]
Oct 18 21:26:33 cecil kernel: [ 0.544482] pci 0000:00:01.1: PCI bridge to [bus 02]
Oct 18 21:26:33 cecil kernel: [ 0.544484] pci 0000:00:01.1: bridge window [io 0x3000-0x3fff]
Oct 18 21:26:33 cecil kernel: [ 0.544486] pci 0000:00:01.1: bridge window [mem 0xa2000000-0xa30fffff]
Oct 18 21:26:33 cecil kernel: [ 0.544489] pci 0000:00:01.1: bridge window [mem 0x90000000-0xa1ffffff 64bit pref]
Oct 18 21:26:33 cecil kernel: [ 0.544576] acpiphp: Slot [1] registered
Oct 18 21:26:33 cecil kernel: [ 0.544589] pci 0000:00:1b.0: PCI bridge to [bus 03]
Oct 18 21:26:33 cecil kernel: [ 0.544678] acpiphp: Slot [1-1] registered
Oct 18 21:26:33 cecil kernel: [ 0.544686] pci 0000:00:1c.0: PCI bridge to [bus 04]
Oct 18 21:26:33 cecil kernel: [ 0.544784] pci 0000:05:00.0: [144d:a808] type 00 class 0x010802
Oct 18 21:26:33 cecil kernel: [ 0.544826] pci 0000:05:00.0: reg 0x10: [mem 0xa3200000-0xa3203fff 64bit]
Oct 18 21:26:33 cecil kernel: [ 0.545099] pci 0000:00:1d.0: PCI bridge to [bus 05]
Oct 18 21:26:33 cecil kernel: [ 0.545107] pci 0000:00:1d.0: bridge window [mem 0xa3200000-0xa32fffff]
Oct 18 21:26:33 cecil kernel: [ 0.546096] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0
Oct 18 21:26:33 cecil kernel: [ 0.546145] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *1
Oct 18 21:26:33 cecil kernel: [ 0.546193] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0
Oct 18 21:26:33 cecil kernel: [ 0.546240] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0
Oct 18 21:26:33 cecil kernel: [ 0.546287] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0
Oct 18 21:26:33 cecil kernel: [ 0.546334] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0
Oct 18 21:26:33 cecil kernel: [ 0.546381] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0
Oct 18 21:26:33 cecil kernel: [ 0.546427] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0
Oct 18 21:26:33 cecil kernel: [ 0.546868] pci 0000:02:00.0: vgaarb: setting as boot VGA device
Oct 18 21:26:33 cecil kernel: [ 0.546868] pci 0000:02:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
Oct 18 21:26:33 cecil kernel: [ 0.546868] pci 0000:02:00.0: vgaarb: bridge control possible
Oct 18 21:26:33 cecil kernel: [ 0.546868] vgaarb: loaded
Oct 18 21:26:33 cecil kernel: [ 0.546868] pps_core: LinuxPPS API ver. 1 registered
Oct 18 21:26:33 cecil kernel: [ 0.546868] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
Oct 18 21:26:33 cecil kernel: [ 0.546868] PTP clock support registered
Oct 18 21:26:33 cecil kernel: [ 0.546868] EDAC MC: Ver: 3.0.0
Oct 18 21:26:33 cecil kernel: [ 0.546868] PCI: Using ACPI for IRQ routing
Oct 18 21:26:33 cecil kernel: [ 0.629791] PCI: pci_cache_line_size set to 64 bytes
Oct 18 21:26:33 cecil kernel: [ 0.629882] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
Oct 18 21:26:33 cecil kernel: [ 0.629883] e820: reserve RAM buffer [mem 0x8cc36000-0x8fffffff]
Oct 18 21:26:33 cecil kernel: [ 0.629884] e820: reserve RAM buffer [mem 0x8f410000-0x8fffffff]
Oct 18 21:26:33 cecil kernel: [ 0.629885] e820: reserve RAM buffer [mem 0x86e000000-0x86fffffff]
Oct 18 21:26:33 cecil kernel: [ 0.630254] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
Oct 18 21:26:33 cecil kernel: [ 0.630258] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
Oct 18 21:26:33 cecil kernel: [ 0.631514] clocksource: Switched to clocksource tsc-early
Oct 18 21:26:33 cecil kernel: [ 0.635321] VFS: Disk quotas dquot_6.6.0
Oct 18 21:26:33 cecil kernel: [ 0.635332] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Oct 18 21:26:33 cecil kernel: [ 0.635347] *** VALIDATE hugetlbfs ***
Oct 18 21:26:33 cecil kernel: [ 0.635365] pnp: PnP ACPI init
Oct 18 21:26:33 cecil kernel: [ 0.635421] system 00:00: [mem 0x40000000-0x403fffff] could not be reserved
Oct 18 21:26:33 cecil kernel: [ 0.635425] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
Oct 18 21:26:33 cecil kernel: [ 0.635540] system 00:01: [io 0x0290-0x029f] has been reserved
Oct 18 21:26:33 cecil kernel: [ 0.635544] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
Oct 18 21:26:33 cecil kernel: [ 0.635571] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
Oct 18 21:26:33 cecil kernel: [ 0.635602] pnp 00:03: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
Oct 18 21:26:33 cecil kernel: [ 0.636018] pnp 00:04: [dma 0 disabled]
Oct 18 21:26:33 cecil kernel: [ 0.636040] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
Oct 18 21:26:33 cecil kernel: [ 0.636104] system 00:05: [io 0x0680-0x069f] has been reserved
Oct 18 21:26:33 cecil kernel: [ 0.636107] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
Oct 18 21:26:33 cecil kernel: [ 0.636177] system 00:06: [io 0x1854-0x1857] has been reserved
Oct 18 21:26:33 cecil kernel: [ 0.636180] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
Oct 18 21:26:33 cecil kernel: [ 0.636293] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
Oct 18 21:26:33 cecil kernel: [ 0.636295] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
Oct 18 21:26:33 cecil kernel: [ 0.636296] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
Oct 18 21:26:33 cecil kernel: [ 0.636298] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
Oct 18 21:26:33 cecil kernel: [ 0.636300] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
Oct 18 21:26:33 cecil kernel: [ 0.636302] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
Oct 18 21:26:33 cecil kernel: [ 0.636303] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
Oct 18 21:26:33 cecil kernel: [ 0.636305] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
Oct 18 21:26:33 cecil kernel: [ 0.636308] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
Oct 18 21:26:33 cecil kernel: [ 0.636436] system 00:08: [io 0x1800-0x18fe] could not be reserved
Oct 18 21:26:33 cecil kernel: [ 0.636438] system 00:08: [mem 0xfd000000-0xfd69ffff] has been reserved
Oct 18 21:26:33 cecil kernel: [ 0.636440] system 00:08: [mem 0xfd6c0000-0xfd6cffff] has been reserved
Oct 18 21:26:33 cecil kernel: [ 0.636442] system 00:08: [mem 0xfd6f0000-0xfdffffff] has been reserved
Oct 18 21:26:33 cecil kernel: [ 0.636444] system 00:08: [mem 0xfe000000-0xfe01ffff] could not be reserved
Oct 18 21:26:33 cecil kernel: [ 0.636446] system 00:08: [mem 0xfe200000-0xfe7fffff] has been reserved
Oct 18 21:26:33 cecil kernel: [ 0.636447] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
Oct 18 21:26:33 cecil kernel: [ 0.636450] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
Oct 18 21:26:33 cecil kernel: [ 0.636623] system 00:09: [io 0x2000-0x20fe] has been reserved
Oct 18 21:26:33 cecil kernel: [ 0.636626] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
Oct 18 21:26:33 cecil kernel: [ 0.637320] system 00:0a: [mem 0xfd6e0000-0xfd6effff] has been reserved
Oct 18 21:26:33 cecil kernel: [ 0.637322] system 00:0a: [mem 0xfd6d0000-0xfd6dffff] has been reserved
Oct 18 21:26:33 cecil kernel: [ 0.637324] system 00:0a: [mem 0xfd6b0000-0xfd6bffff] has been reserved
Oct 18 21:26:33 cecil kernel: [ 0.637325] system 00:0a: [mem 0xfd6a0000-0xfd6affff] has been reserved
Oct 18 21:26:33 cecil kernel: [ 0.637328] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
Oct 18 21:26:33 cecil kernel: [ 0.637879] pnp: PnP ACPI: found 11 devices
Oct 18 21:26:33 cecil kernel: [ 0.638644] thermal_sys: Registered thermal governor 'fair_share'
Oct 18 21:26:33 cecil kernel: [ 0.638645] thermal_sys: Registered thermal governor 'bang_bang'
Oct 18 21:26:33 cecil kernel: [ 0.638647] thermal_sys: Registered thermal governor 'step_wise'
Oct 18 21:26:33 cecil kernel: [ 0.638648] thermal_sys: Registered thermal governor 'user_space'
Oct 18 21:26:33 cecil kernel: [ 0.643172] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
Oct 18 21:26:33 cecil kernel: [ 0.643180] pci 0000:00:01.0: PCI bridge to [bus 01]
Oct 18 21:26:33 cecil kernel: [ 0.643185] pci 0000:00:01.1: PCI bridge to [bus 02]
Oct 18 21:26:33 cecil kernel: [ 0.643187] pci 0000:00:01.1: bridge window [io 0x3000-0x3fff]
Oct 18 21:26:33 cecil kernel: [ 0.643189] pci 0000:00:01.1: bridge window [mem 0xa2000000-0xa30fffff]
Oct 18 21:26:33 cecil kernel: [ 0.643192] pci 0000:00:01.1: bridge window [mem 0x90000000-0xa1ffffff 64bit pref]
Oct 18 21:26:33 cecil kernel: [ 0.643195] pci 0000:00:1b.0: PCI bridge to [bus 03]
Oct 18 21:26:33 cecil kernel: [ 0.643215] pci 0000:00:1c.0: PCI bridge to [bus 04]
Oct 18 21:26:33 cecil kernel: [ 0.643231] pci 0000:00:1d.0: PCI bridge to [bus 05]
Oct 18 21:26:33 cecil kernel: [ 0.643237] pci 0000:00:1d.0: bridge window [mem 0xa3200000-0xa32fffff]
Oct 18 21:26:33 cecil kernel: [ 0.643248] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
Oct 18 21:26:33 cecil kernel: [ 0.643249] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
Oct 18 21:26:33 cecil kernel: [ 0.643251] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
Oct 18 21:26:33 cecil kernel: [ 0.643253] pci_bus 0000:00: resource 7 [mem 0x90000000-0xdfffffff window]
Oct 18 21:26:33 cecil kernel: [ 0.643254] pci_bus 0000:00: resource 8 [mem 0xfc800000-0xfe7fffff window]
Oct 18 21:26:33 cecil kernel: [ 0.643256] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
Oct 18 21:26:33 cecil kernel: [ 0.643257] pci_bus 0000:02: resource 1 [mem 0xa2000000-0xa30fffff]
Oct 18 21:26:33 cecil kernel: [ 0.643259] pci_bus 0000:02: resource 2 [mem 0x90000000-0xa1ffffff 64bit pref]
Oct 18 21:26:33 cecil kernel: [ 0.643261] pci_bus 0000:05: resource 1 [mem 0xa3200000-0xa32fffff]
Oct 18 21:26:33 cecil kernel: [ 0.643365] NET: Registered protocol family 2
Oct 18 21:26:33 cecil kernel: [ 0.643446] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
Oct 18 21:26:33 cecil kernel: [ 0.643470] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
Oct 18 21:26:33 cecil kernel: [ 0.643631] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
Oct 18 21:26:33 cecil kernel: [ 0.643715] TCP: Hash tables configured (established 262144 bind 65536)
Oct 18 21:26:33 cecil kernel: [ 0.643732] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear)
Oct 18 21:26:33 cecil kernel: [ 0.643774] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear)
Oct 18 21:26:33 cecil kernel: [ 0.643839] NET: Registered protocol family 1
Oct 18 21:26:33 cecil kernel: [ 0.643843] NET: Registered protocol family 44
Oct 18 21:26:33 cecil kernel: [ 0.644532] pci 0000:02:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
Oct 18 21:26:33 cecil kernel: [ 0.644542] pci 0000:02:00.1: D0 power state depends on 0000:02:00.0
Oct 18 21:26:33 cecil kernel: [ 0.644573] PCI: CLS 64 bytes, default 64
Oct 18 21:26:33 cecil kernel: [ 0.644594] Trying to unpack rootfs image as initramfs...
Oct 18 21:26:33 cecil kernel: [ 0.984130] Freeing initrd memory: 32928K
Oct 18 21:26:33 cecil kernel: [ 0.984135] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Oct 18 21:26:33 cecil kernel: [ 0.984137] software IO TLB: mapped [mem 0x88c36000-0x8cc36000] (64MB)
Oct 18 21:26:33 cecil kernel: [ 0.984299] platform rtc_cmos: registered platform RTC device (no PNP device found)
Oct 18 21:26:33 cecil kernel: [ 0.984685] Initialise system trusted keyrings
Oct 18 21:26:33 cecil kernel: [ 0.984713] workingset: timestamp_bits=40 max_order=23 bucket_order=0
Oct 18 21:26:33 cecil kernel: [ 0.984817] Key type asymmetric registered
Oct 18 21:26:33 cecil kernel: [ 0.984819] Asymmetric key parser 'x509' registered
Oct 18 21:26:33 cecil kernel: [ 0.984825] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
Oct 18 21:26:33 cecil kernel: [ 0.984827] io scheduler mq-deadline registered
Oct 18 21:26:33 cecil kernel: [ 0.984828] io scheduler kyber registered
Oct 18 21:26:33 cecil kernel: [ 0.985441] pcieport 0000:00:1d.0: AER: enabled with IRQ 124
Oct 18 21:26:33 cecil kernel: [ 0.985534] vesafb: mode is 1600x1200x32, linelength=6656, pages=0
Oct 18 21:26:33 cecil kernel: [ 0.985535] vesafb: scrolling: redraw
Oct 18 21:26:33 cecil kernel: [ 0.985537] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Oct 18 21:26:33 cecil kernel: [ 0.985544] vesafb: framebuffer at 0xa1000000, mapped to 0x0000000009873ff1, using 7808k, total 7808k
Oct 18 21:26:33 cecil kernel: [ 1.113305] Console: switching to colour frame buffer device 200x75
Oct 18 21:26:33 cecil kernel: [ 1.236359] fb0: VESA VGA frame buffer device
Oct 18 21:26:33 cecil kernel: [ 1.236805] intel_idle: MWAIT substates: 0x11142120
Oct 18 21:26:33 cecil kernel: [ 1.236805] intel_idle: v0.4.1 model 0x9E
Oct 18 21:26:33 cecil kernel: [ 1.237233] intel_idle: lapic_timer_reliable_states 0xffffffff
Oct 18 21:26:33 cecil kernel: [ 1.237981] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Oct 18 21:26:33 cecil kernel: [ 1.260725] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Oct 18 21:26:33 cecil kernel: [ 1.262439] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
Oct 18 21:26:33 cecil kernel: [ 1.266296] serio: i8042 KBD port at 0x60,0x64 irq 1
Oct 18 21:26:33 cecil kernel: [ 1.266803] serio: i8042 AUX port at 0x60,0x64 irq 12
Oct 18 21:26:33 cecil kernel: [ 1.267372] mousedev: PS/2 mouse device common for all mice
Oct 18 21:26:33 cecil kernel: [ 1.268002] rtc_cmos rtc_cmos: RTC can wake from S4
Oct 18 21:26:33 cecil kernel: [ 1.269500] rtc_cmos rtc_cmos: registered as rtc0
Oct 18 21:26:33 cecil kernel: [ 1.269958] rtc_cmos rtc_cmos: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
Oct 18 21:26:33 cecil kernel: [ 1.270765] intel_pstate: Intel P-state driver initializing
Oct 18 21:26:33 cecil kernel: [ 1.271990] intel_pstate: HWP enabled
Oct 18 21:26:33 cecil kernel: [ 1.272372] NET: Registered protocol family 10
Oct 18 21:26:33 cecil kernel: [ 1.272967] Segment Routing with IPv6
Oct 18 21:26:33 cecil kernel: [ 1.273376] mip6: Mobile IPv6
Oct 18 21:26:33 cecil kernel: [ 1.273656] NET: Registered protocol family 17
Oct 18 21:26:33 cecil kernel: [ 1.274645] microcode: sig=0x906ed, pf=0x2, revision=0xb8
Oct 18 21:26:33 cecil kernel: [ 1.275354] microcode: Microcode Update Driver: v2.2.
Oct 18 21:26:33 cecil kernel: [ 1.275359] sched_clock: Marking stable (1266566937, 8785266)->(1292975865, -17623662)
Oct 18 21:26:33 cecil kernel: [ 1.276695] registered taskstats version 1
Oct 18 21:26:33 cecil kernel: [ 1.277034] Loading compiled-in X.509 certificates
Oct 18 21:26:33 cecil kernel: [ 1.278617] rtc_cmos rtc_cmos: setting system clock to 2019-10-18T19:25:52 UTC (1571426752)
Oct 18 21:26:33 cecil kernel: [ 1.279632] Freeing unused kernel image memory: 1188K
Oct 18 21:26:33 cecil kernel: [ 1.289427] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
Oct 18 21:26:33 cecil kernel: [ 1.290665] Write protecting the kernel read-only data: 16384k
Oct 18 21:26:33 cecil kernel: [ 1.291604] Freeing unused kernel image memory: 2008K
Oct 18 21:26:33 cecil kernel: [ 1.292290] Freeing unused kernel image memory: 1888K
Oct 18 21:26:33 cecil kernel: [ 1.296414] x86/mm: Checked W+X mappings: passed, no W+X pages found.
Oct 18 21:26:33 cecil kernel: [ 1.296914] rodata_test: all tests were successful
Oct 18 21:26:33 cecil kernel: [ 1.297278] Run /init as init process
Oct 18 21:26:33 cecil kernel: [ 1.361251] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
Oct 18 21:26:33 cecil kernel: [ 1.362141] acpi PNP0C14:03: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
Oct 18 21:26:33 cecil kernel: [ 1.363065] acpi PNP0C14:04: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
Oct 18 21:26:33 cecil kernel: [ 1.363350] thermal LNXTHERM:00: registered as thermal_zone0
Oct 18 21:26:33 cecil kernel: [ 1.364369] ACPI: Thermal Zone [TZ00] (28 C)
Oct 18 21:26:33 cecil kernel: [ 1.376755] ACPI: bus type USB registered
Oct 18 21:26:33 cecil kernel: [ 1.377081] usbcore: registered new interface driver usbfs
Oct 18 21:26:33 cecil kernel: [ 1.377234] SCSI subsystem initialized
Oct 18 21:26:33 cecil kernel: [ 1.377513] usbcore: registered new interface driver hub
Oct 18 21:26:33 cecil kernel: [ 1.378250] usbcore: registered new device driver usb
Oct 18 21:26:33 cecil kernel: [ 1.379239] i801_smbus 0000:00:1f.4: SPD Write Disable is set
Oct 18 21:26:33 cecil kernel: [ 1.379743] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
Oct 18 21:26:33 cecil kernel: [ 1.379804] cryptd: max_cpu_qlen set to 1000
Oct 18 21:26:33 cecil kernel: [ 1.405515] nvme nvme0: pci function 0000:05:00.0
Oct 18 21:26:33 cecil kernel: [ 1.430141] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
Oct 18 21:26:33 cecil kernel: [ 1.430202] libata version 3.00 loaded.
Oct 18 21:26:33 cecil kernel: [ 1.454393] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
Oct 18 21:26:33 cecil kernel: [ 1.478738] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
Oct 18 21:26:33 cecil kernel: [ 1.509879] xhci_hcd 0000:00:14.0: xHCI Host Controller
Oct 18 21:26:33 cecil kernel: [ 1.534803] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
Oct 18 21:26:33 cecil kernel: [ 1.560059] AVX2 version of gcm_enc/dec engaged.
Oct 18 21:26:33 cecil kernel: [ 1.560930] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x110 quirks 0x0000000000009810
Oct 18 21:26:33 cecil kernel: [ 1.585105] AES CTR mode by8 optimization enabled
Oct 18 21:26:33 cecil kernel: [ 1.610513] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
Oct 18 21:26:33 cecil kernel: [ 1.636096] nvme nvme0: missing or invalid SUBNQN field.
Oct 18 21:26:33 cecil kernel: [ 1.661437] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
Oct 18 21:26:33 cecil kernel: [ 1.687172] nvme nvme0: Shutdown timeout set to 8 seconds
Oct 18 21:26:33 cecil kernel: [ 1.712935] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Oct 18 21:26:33 cecil kernel: [ 1.734392] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
Oct 18 21:26:33 cecil kernel: [ 1.749646] nvme nvme0: 8/0/0 default/read/poll queues
Oct 18 21:26:33 cecil kernel: [ 1.765420] ahci 0000:00:17.0: version 3.0
Oct 18 21:26:33 cecil kernel: [ 1.765435] usb usb1: Product: xHCI Host Controller
Oct 18 21:26:33 cecil kernel: [ 1.765436] usb usb1: Manufacturer: Linux 5.3.6-raw xhci-hcd
Oct 18 21:26:33 cecil kernel: [ 1.765436] usb usb1: SerialNumber: 0000:00:14.0
Oct 18 21:26:33 cecil kernel: [ 1.765567] hub 1-0:1.0: USB hub found
Oct 18 21:26:33 cecil kernel: [ 1.765582] hub 1-0:1.0: 16 ports detected
Oct 18 21:26:33 cecil kernel: [ 1.766507] xhci_hcd 0000:00:14.0: xHCI Host Controller
Oct 18 21:26:33 cecil kernel: [ 1.766508] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
Oct 18 21:26:33 cecil kernel: [ 1.766510] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
Oct 18 21:26:33 cecil kernel: [ 1.766560] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.03
Oct 18 21:26:33 cecil kernel: [ 1.766561] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Oct 18 21:26:33 cecil kernel: [ 1.766561] usb usb2: Product: xHCI Host Controller
Oct 18 21:26:33 cecil kernel: [ 1.766561] usb usb2: Manufacturer: Linux 5.3.6-raw xhci-hcd
Oct 18 21:26:33 cecil kernel: [ 1.766562] usb usb2: SerialNumber: 0000:00:14.0
Oct 18 21:26:33 cecil kernel: [ 1.766673] hub 2-0:1.0: USB hub found
Oct 18 21:26:33 cecil kernel: [ 1.766699] hub 2-0:1.0: 10 ports detected
Oct 18 21:26:33 cecil kernel: [ 1.766870] usb: port power management may be unreliable
Oct 18 21:26:33 cecil kernel: [ 1.797291] nvme0n1: p1 p2 p3
Oct 18 21:26:33 cecil kernel: [ 1.800772] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) 0c:9d:92:66:99:ef
Oct 18 21:26:33 cecil kernel: [ 1.800775] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
Oct 18 21:26:33 cecil kernel: [ 1.800868] e1000e 0000:00:1f.6 eth0: MAC: 13, PHY: 12, PBA No: FFFFFF-0FF
Oct 18 21:26:33 cecil kernel: [ 1.817953] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
Oct 18 21:26:33 cecil kernel: [ 2.028593] tsc: Refined TSC clocksource calibration: 3599.999 MHz
Oct 18 21:26:33 cecil kernel: [ 2.048361] ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst
Oct 18 21:26:33 cecil kernel: [ 2.074405] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x33e4525366a, max_idle_ns: 440795257657 ns
Oct 18 21:26:33 cecil kernel: [ 2.086555] usb 1-14: new full-speed USB device number 2 using xhci_hcd
Oct 18 21:26:33 cecil kernel: [ 2.114063] scsi host0: ahci
Oct 18 21:26:33 cecil kernel: [ 2.477988] clocksource: Switched to clocksource tsc
Oct 18 21:26:33 cecil kernel: [ 2.483540] scsi host1: ahci
Oct 18 21:26:33 cecil kernel: [ 2.525834] input: PS2++ Logitech TrackMan as /devices/platform/i8042/serio1/input/input2
Oct 18 21:26:33 cecil kernel: [ 2.532910] scsi host2: ahci
Oct 18 21:26:33 cecil kernel: [ 2.587496] scsi host3: ahci
Oct 18 21:26:33 cecil kernel: [ 2.588297] usb 1-14: New USB device found, idVendor=8087, idProduct=0aaa, bcdDevice= 0.02
Oct 18 21:26:33 cecil kernel: [ 2.613943] scsi host4: ahci
Oct 18 21:26:33 cecil kernel: [ 2.639885] usb 1-14: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Oct 18 21:26:33 cecil kernel: [ 2.692809] scsi host5: ahci
Oct 18 21:26:33 cecil kernel: [ 2.719401] ata1: SATA max UDMA/133 abar m2048@0xa333d000 port 0xa333d100 irq 136
Oct 18 21:26:33 cecil kernel: [ 2.746363] ata2: SATA max UDMA/133 abar m2048@0xa333d000 port 0xa333d180 irq 136
Oct 18 21:26:33 cecil kernel: [ 2.773011] ata3: SATA max UDMA/133 abar m2048@0xa333d000 port 0xa333d200 irq 136
Oct 18 21:26:33 cecil kernel: [ 2.799445] ata4: SATA max UDMA/133 abar m2048@0xa333d000 port 0xa333d280 irq 136
Oct 18 21:26:33 cecil kernel: [ 2.825658] ata5: SATA max UDMA/133 abar m2048@0xa333d000 port 0xa333d300 irq 136
Oct 18 21:26:33 cecil kernel: [ 2.851801] ata6: SATA max UDMA/133 abar m2048@0xa333d000 port 0xa333d380 irq 136
Oct 18 21:26:33 cecil kernel: [ 3.185447] ata2: SATA link down (SStatus 4 SControl 300)
Oct 18 21:26:33 cecil kernel: [ 3.215006] ata4: SATA link down (SStatus 4 SControl 300)
Oct 18 21:26:33 cecil kernel: [ 3.240792] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Oct 18 21:26:33 cecil kernel: [ 3.266215] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Oct 18 21:26:33 cecil kernel: [ 3.291698] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Oct 18 21:26:33 cecil kernel: [ 3.316795] ata1: SATA link down (SStatus 4 SControl 300)
Oct 18 21:26:33 cecil kernel: [ 3.341127] ata6.00: ATA-10: WDC WD40EFRX-68N32N0, 82.00A82, max UDMA/133
Oct 18 21:26:33 cecil kernel: [ 3.366042] ata6.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 32), AA
Oct 18 21:26:33 cecil kernel: [ 3.390998] ata3.00: ATA-9: WDC WD40EFRX-68WT0N0, 82.00A82, max UDMA/133
Oct 18 21:26:33 cecil kernel: [ 3.416587] ata3.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 32), AA
Oct 18 21:26:33 cecil kernel: [ 3.442230] ata5.00: ATA-9: WDC WD40EFRX-68WT0N0, 82.00A82, max UDMA/133
Oct 18 21:26:33 cecil kernel: [ 3.467655] ata5.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 32), AA
Oct 18 21:26:33 cecil kernel: [ 3.493915] ata5.00: configured for UDMA/133
Oct 18 21:26:33 cecil kernel: [ 3.519254] ata3.00: configured for UDMA/133
Oct 18 21:26:33 cecil kernel: [ 3.544598] ata6.00: configured for UDMA/133
Oct 18 21:26:33 cecil kernel: [ 3.544738] scsi 2:0:0:0: Direct-Access ATA WDC WD40EFRX-68W 0A82 PQ: 0 ANSI: 5
Oct 18 21:26:33 cecil kernel: [ 3.593834] scsi 4:0:0:0: Direct-Access ATA WDC WD40EFRX-68W 0A82 PQ: 0 ANSI: 5
Oct 18 21:26:33 cecil kernel: [ 3.618016] scsi 5:0:0:0: Direct-Access ATA WDC WD40EFRX-68N 0A82 PQ: 0 ANSI: 5
Oct 18 21:26:33 cecil kernel: [ 3.643948] sd 2:0:0:0: [sda] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
Oct 18 21:26:33 cecil kernel: [ 3.643956] sd 4:0:0:0: [sdb] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
Oct 18 21:26:33 cecil kernel: [ 3.644048] sd 5:0:0:0: [sdc] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
Oct 18 21:26:33 cecil kernel: [ 3.644049] sd 5:0:0:0: [sdc] 4096-byte physical blocks
Oct 18 21:26:33 cecil kernel: [ 3.644054] sd 5:0:0:0: [sdc] Write Protect is off
Oct 18 21:26:33 cecil kernel: [ 3.644055] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
Oct 18 21:26:33 cecil kernel: [ 3.644062] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Oct 18 21:26:33 cecil kernel: [ 3.669079] sd 2:0:0:0: [sda] 4096-byte physical blocks
Oct 18 21:26:33 cecil kernel: [ 3.683450] sdc: sdc1 sdc2
Oct 18 21:26:33 cecil kernel: [ 3.683739] sd 5:0:0:0: [sdc] Attached SCSI disk
Oct 18 21:26:33 cecil kernel: [ 3.693256] sd 4:0:0:0: [sdb] 4096-byte physical blocks
Oct 18 21:26:33 cecil kernel: [ 3.716327] sd 2:0:0:0: [sda] Write Protect is off
Oct 18 21:26:33 cecil kernel: [ 3.738804] sd 4:0:0:0: [sdb] Write Protect is off
Oct 18 21:26:33 cecil kernel: [ 3.761353] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
Oct 18 21:26:33 cecil kernel: [ 3.761358] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Oct 18 21:26:33 cecil kernel: [ 3.783763] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
Oct 18 21:26:33 cecil kernel: [ 3.783768] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Oct 18 21:26:33 cecil kernel: [ 3.858039] sda: sda1 sda2
Oct 18 21:26:33 cecil kernel: [ 3.912628] sdb: sdb1 sdb2
Oct 18 21:26:33 cecil kernel: [ 3.913790] sd 2:0:0:0: [sda] Attached SCSI disk
Oct 18 21:26:33 cecil kernel: [ 3.935229] sd 4:0:0:0: [sdb] Attached SCSI disk
Oct 18 21:26:33 cecil kernel: [ 4.188502] md/raid1:md0: active with 2 out of 2 mirrors
Oct 18 21:26:33 cecil kernel: [ 4.257154] md0: detected capacity change from 0 to 4000650690560
Oct 18 21:26:33 cecil kernel: [ 4.377517] raid6: avx2x4 gen() 8605 MB/s
Oct 18 21:26:33 cecil kernel: [ 4.437505] raid6: avx2x4 xor() 28275 MB/s
Oct 18 21:26:33 cecil kernel: [ 4.475505] raid6: avx2x2 gen() 44070 MB/s
Oct 18 21:26:33 cecil kernel: [ 4.513505] raid6: avx2x2 xor() 27515 MB/s
Oct 18 21:26:33 cecil kernel: [ 4.551505] raid6: avx2x1 gen() 35164 MB/s
Oct 18 21:26:33 cecil kernel: [ 4.588505] raid6: avx2x1 xor() 22642 MB/s
Oct 18 21:26:33 cecil kernel: [ 4.625505] raid6: sse2x4 gen() 20550 MB/s
Oct 18 21:26:33 cecil kernel: [ 4.662504] raid6: sse2x4 xor() 12607 MB/s
Oct 18 21:26:33 cecil kernel: [ 4.699504] raid6: sse2x2 gen() 17546 MB/s
Oct 18 21:26:33 cecil kernel: [ 4.735505] raid6: sse2x2 xor() 11818 MB/s
Oct 18 21:26:33 cecil kernel: [ 4.771507] raid6: sse2x1 gen() 15652 MB/s
Oct 18 21:26:33 cecil kernel: [ 4.807506] raid6: sse2x1 xor() 8933 MB/s
Oct 18 21:26:33 cecil kernel: [ 4.826235] raid6: using algorithm avx2x2 gen() 44070 MB/s
Oct 18 21:26:33 cecil kernel: [ 4.844810] raid6: .... xor() 27515 MB/s, rmw enabled
Oct 18 21:26:33 cecil kernel: [ 4.862908] raid6: using avx2x2 recovery algorithm
Oct 18 21:26:33 cecil kernel: [ 4.880936] xor: automatically using best checksumming function avx
Oct 18 21:26:33 cecil kernel: [ 4.899722] async_tx: api initialized (async)
Oct 18 21:26:33 cecil kernel: [ 4.988588] Btrfs loaded, crc32c=crc32c-intel
Oct 18 21:26:33 cecil kernel: [ 5.087406] PM: Image not found (code -22)
Oct 18 21:26:33 cecil kernel: [ 5.231318] EXT4-fs (nvme0n1p1): mounted filesystem with ordered data mode. Opts: (null)
Oct 18 21:26:33 cecil kernel: <1054>[ 5.575383] systemd-udevd[554]: Network interface NamePolicy= disabled on kernel command line, ignoring.
Oct 18 21:26:33 cecil kernel: [ 5.710270] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
Oct 18 21:26:33 cecil kernel: [ 5.732530] ACPI: Sleep Button [SLPB]
Oct 18 21:26:33 cecil kernel: [ 5.732556] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
Oct 18 21:26:33 cecil kernel: [ 5.732559] ACPI: Power Button [PWRB]
Oct 18 21:26:33 cecil kernel: [ 5.732582] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
Oct 18 21:26:33 cecil kernel: [ 5.735555] ACPI: Power Button [PWRF]
Oct 18 21:26:33 cecil kernel: <1054>[ 5.749144] systemd-udevd[573]: Using default interface naming scheme 'v240'.
Oct 18 21:26:33 cecil kernel: <1054>[ 5.749763] systemd-udevd[573]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 18 21:26:33 cecil kernel: <1054>[ 5.758335] systemd-udevd[629]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 18 21:26:33 cecil kernel: [ 5.844241] hpet: Lost 1 RTC interrupts
Oct 18 21:26:33 cecil kernel: [ 5.914168] hpet: Lost 1 RTC interrupts
Oct 18 21:26:33 cecil kernel: [ 5.938067] hpet: Lost 1 RTC interrupts
Oct 18 21:26:33 cecil kernel: [ 5.985251] hpet: Lost 1 RTC interrupts
Oct 18 21:26:33 cecil kernel: [ 6.032036] hpet: Lost 1 RTC interrupts
Oct 18 21:26:33 cecil kernel: [ 6.055662] input: PC Speaker as /devices/platform/pcspkr/input/input6
Oct 18 21:26:33 cecil kernel: [ 6.080315] IPMI message handler: version 39.2
Oct 18 21:26:33 cecil kernel: [ 6.104655] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer
Oct 18 21:26:33 cecil kernel: [ 6.128577] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
Oct 18 21:26:33 cecil kernel: [ 6.128578] RAPL PMU: hw unit of domain package 2^-14 Joules
Oct 18 21:26:33 cecil kernel: [ 6.128578] RAPL PMU: hw unit of domain dram 2^-14 Joules
Oct 18 21:26:33 cecil kernel: [ 6.139866] sd 2:0:0:0: Attached scsi generic sg0 type 0
Oct 18 21:26:33 cecil kernel: [ 6.139883] sd 4:0:0:0: Attached scsi generic sg1 type 0
Oct 18 21:26:33 cecil kernel: [ 6.139974] sd 5:0:0:0: Attached scsi generic sg2 type 0
Oct 18 21:26:33 cecil kernel: [ 6.157635] asus_wmi: ASUS WMI generic driver loaded
Oct 18 21:26:33 cecil kernel: [ 6.157714] cfg80211: Loading compiled-in X.509 certificates for regulatory database
Oct 18 21:26:33 cecil kernel: [ 6.158126] ipmi device interface
Oct 18 21:26:33 cecil kernel: [ 6.158374] asus_wmi: Initialization: 0x0
Oct 18 21:26:33 cecil kernel: [ 6.158393] asus_wmi: BIOS WMI version: 0.9
Oct 18 21:26:33 cecil kernel: [ 6.158467] asus_wmi: SFUN value: 0x0
Oct 18 21:26:33 cecil kernel: [ 6.158468] eeepc-wmi eeepc-wmi: Detected ASUSWMI, use DCTS
Oct 18 21:26:33 cecil kernel: [ 6.158637] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input7
Oct 18 21:26:33 cecil kernel: [ 6.158720] asus_wmi: Number of fans: 1
Oct 18 21:26:33 cecil kernel: [ 6.167893] nvidia: loading out-of-tree module taints kernel.
Oct 18 21:26:33 cecil kernel: [ 6.167897] nvidia: module license 'NVIDIA' taints kernel.
Oct 18 21:26:33 cecil kernel: [ 6.167897] Disabling lock debugging due to kernel taint
Oct 18 21:26:33 cecil kernel: [ 6.199752] Error: Driver 'pcspkr' is already registered, aborting...
Oct 18 21:26:33 cecil kernel: [ 6.217018] kvm: disabled by bios
Oct 18 21:26:33 cecil kernel: [ 6.217048] snd_hda_intel 0000:02:00.1: Disabling MSI
Oct 18 21:26:33 cecil kernel: [ 6.217051] snd_hda_intel 0000:02:00.1: Handle vga_switcheroo audio client
Oct 18 21:26:33 cecil kernel: [ 6.218940] nvidia-nvlink: Nvlink Core is being initialized, major device number 243
Oct 18 21:26:33 cecil kernel: [ 6.219128] nvidia 0000:02:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
Oct 18 21:26:33 cecil kernel: [ 6.270591] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 430.50 Thu Sep 5 22:36:31 CDT 2019
Oct 18 21:26:33 cecil kernel: [ 6.903656] kvm: disabled by bios
Oct 18 21:26:33 cecil kernel: [ 6.911229] Bluetooth: Core ver 2.22
Oct 18 21:26:33 cecil kernel: [ 6.911234] NET: Registered protocol family 31
Oct 18 21:26:33 cecil kernel: [ 6.911235] Bluetooth: HCI device and connection manager initialized
Oct 18 21:26:33 cecil kernel: [ 6.911237] Bluetooth: HCI socket layer initialized
Oct 18 21:26:33 cecil kernel: [ 6.911237] Bluetooth: L2CAP socket layer initialized
Oct 18 21:26:33 cecil kernel: [ 6.911239] Bluetooth: SCO socket layer initialized
Oct 18 21:26:33 cecil kernel: [ 6.922695] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Oct 18 21:26:33 cecil kernel: [ 6.922796] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
Oct 18 21:26:33 cecil kernel: [ 6.922797] cfg80211: failed to load regulatory.db
Oct 18 21:26:33 cecil kernel: [ 6.927742] snd_hda_codec_generic hdaudioC0D0: autoconfig for Generic: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
Oct 18 21:26:33 cecil kernel: [ 6.927742] snd_hda_codec_generic hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
Oct 18 21:26:33 cecil kernel: [ 6.927743] snd_hda_codec_generic hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
Oct 18 21:26:33 cecil kernel: [ 6.927743] snd_hda_codec_generic hdaudioC0D0: mono: mono_out=0x0
Oct 18 21:26:33 cecil kernel: [ 6.927744] snd_hda_codec_generic hdaudioC0D0: dig-out=0x11/0x0
Oct 18 21:26:33 cecil kernel: [ 6.927744] snd_hda_codec_generic hdaudioC0D0: inputs:
Oct 18 21:26:33 cecil kernel: [ 6.927745] snd_hda_codec_generic hdaudioC0D0: Front Mic=0x19
Oct 18 21:26:33 cecil kernel: [ 6.927745] snd_hda_codec_generic hdaudioC0D0: Rear Mic=0x18
Oct 18 21:26:33 cecil kernel: [ 6.927746] snd_hda_codec_generic hdaudioC0D0: Line=0x1a
Oct 18 21:26:33 cecil kernel: [ 6.947644] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
Oct 18 21:26:33 cecil kernel: [ 6.947668] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
Oct 18 21:26:33 cecil kernel: [ 6.947687] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
Oct 18 21:26:33 cecil kernel: [ 6.947708] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
Oct 18 21:26:33 cecil kernel: [ 6.947727] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
Oct 18 21:26:33 cecil kernel: [ 6.968337] kvm: disabled by bios
Oct 18 21:26:33 cecil kernel: [ 7.563833] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/0000:02:00.1/sound/card1/input13
Oct 18 21:26:33 cecil kernel: [ 7.707752] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/0000:02:00.1/sound/card1/input14
Oct 18 21:26:33 cecil kernel: [ 7.707807] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.1/0000:02:00.1/sound/card1/input15
Oct 18 21:26:33 cecil kernel: [ 7.764386] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.1/0000:02:00.1/sound/card1/input16
Oct 18 21:26:33 cecil kernel: [ 7.795155] usbcore: registered new interface driver btusb
Oct 18 21:26:33 cecil kernel: [ 7.796343] Bluetooth: hci0: Firmware revision 0.1 build 216 week 27 2019
Oct 18 21:26:33 cecil kernel: [ 7.810576] kvm: disabled by bios
Oct 18 21:26:33 cecil kernel: [ 7.810586] Intel(R) Wireless WiFi driver for Linux
Oct 18 21:26:33 cecil kernel: [ 7.810587] Copyright(c) 2003- 2015 Intel Corporation
Oct 18 21:26:33 cecil kernel: [ 7.812624] iwlwifi 0000:00:14.3: Found debug destination: EXTERNAL_DRAM
Oct 18 21:26:33 cecil kernel: [ 7.812625] iwlwifi 0000:00:14.3: Found debug configuration: 0
Oct 18 21:26:33 cecil kernel: [ 7.812762] iwlwifi 0000:00:14.3: loaded firmware version 46.a41adfe7.0 op_mode iwlmvm
Oct 18 21:26:33 cecil kernel: [ 7.862124] kvm: disabled by bios
Oct 18 21:26:33 cecil kernel: [ 7.863932] iwlwifi 0000:00:14.3: Detected Intel(R) Dual Band Wireless AC 9560, REV=0x318
Oct 18 21:26:33 cecil kernel: [ 7.871360] iwlwifi 0000:00:14.3: Applying debug destination EXTERNAL_DRAM
Oct 18 21:26:33 cecil kernel: [ 7.871475] iwlwifi 0000:00:14.3: Allocated 0x00400000 bytes for firmware monitor.
Oct 18 21:26:33 cecil kernel: [ 7.912373] iwlwifi 0000:00:14.3: base HW address: 94:b8:6d:55:35:61
Oct 18 21:26:33 cecil kernel: [ 8.232017] kvm: disabled by bios
Oct 18 21:26:33 cecil kernel: [ 8.265851] kvm: disabled by bios
Oct 18 21:26:33 cecil kernel: [ 8.288818] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
Oct 18 21:26:33 cecil kernel: [ 8.288924] thermal thermal_zone2: failed to read out thermal zone (-61)
Oct 18 21:26:33 cecil kernel: <1054>[ 8.289103] systemd-udevd[611]: Using default interface naming scheme 'v240'.
Oct 18 21:26:33 cecil kernel: <1054>[ 8.291999] systemd-udevd[611]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 18 21:26:33 cecil kernel: [ 8.307890] kvm: disabled by bios
Oct 18 21:26:33 cecil kernel: [ 8.864569] Adding 33554428k swap on /dev/nvme0n1p2. Priority:-2 extents:1 across:33554428k SSDsc
Oct 18 21:26:33 cecil kernel: [ 8.969431] EXT4-fs (nvme0n1p1): re-mounted. Opts: discard
Oct 18 21:26:33 cecil kernel: [ 9.181970] device-mapper: uevent: version 1.0.3
Oct 18 21:26:33 cecil kernel: [ 9.210242] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com
Oct 18 21:26:33 cecil kernel: [ 9.279343] loop: module loaded
Oct 18 21:26:33 cecil kernel: [ 9.312493] tun: Universal TUN/TAP device driver, 1.6
Oct 18 21:26:33 cecil kernel: [ 9.344026] nct6775: Enabling hardware monitor logical device mappings.
Oct 18 21:26:33 cecil kernel: [ 9.371815] nct6775: Found NCT6798D or compatible chip at 0x2e:0x290
Oct 18 21:26:33 cecil kernel: [ 9.399617] ACPI Warning: SystemIO range 0x0000000000000295-0x0000000000000296 conflicts with OpRegion 0x0000000000000290-0x0000000000000299 (\AMW0.SHWM) (20190703/utaddress-204)
Oct 18 21:26:33 cecil kernel: [ 9.428916] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Oct 18 21:26:33 cecil kernel: [ 9.471111] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 430.50 Thu Sep 5 22:39:50 CDT 2019
Oct 18 21:26:33 cecil kernel: [ 9.504576] Linux agpgart interface v0.103
Oct 18 21:26:33 cecil kernel: [ 9.549403] [drm] [nvidia-drm] [GPU ID 0x00000200] Loading driver
Oct 18 21:26:33 cecil kernel: [ 9.579909] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:02:00.0 on minor 0
Oct 18 21:26:33 cecil kernel: [ 10.474785] EXT4-fs (nvme0n1p3): mounted filesystem with ordered data mode. Opts: discard
Oct 18 21:26:33 cecil kernel: [ 10.593135] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
Oct 18 21:26:33 cecil kernel: [ 11.073631] device eth0 entered promiscuous mode
Oct 18 21:26:33 cecil kernel: [ 11.170037] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Oct 18 21:26:33 cecil kernel: <1054>[ 11.200784] systemd-udevd[630]: Using default interface naming scheme 'v240'.
Oct 18 21:26:33 cecil kernel: [ 11.201759] br0: port 1(eth0) entered blocking state
Oct 18 21:26:33 cecil kernel: [ 11.260560] br0: port 1(eth0) entered disabled state
Oct 18 21:26:33 cecil kernel: <1054>[ 11.290076] systemd-udevd[630]: link_config: autonegotiation is unset or enabled, the speed and duplex are not writable.
Oct 18 21:26:33 cecil kernel: [ 11.423577] 8021q: 802.1Q VLAN Support v1.8
Oct 18 21:26:33 cecil kernel: [ 17.149536] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
Oct 18 21:26:33 cecil kernel: [ 17.182297] br0: port 1(eth0) entered blocking state
Oct 18 21:26:33 cecil kernel: [ 17.211665] br0: port 1(eth0) entered forwarding state
Oct 18 21:26:33 cecil kernel: [ 17.241247] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
Oct 18 21:26:33 cecil kernel: [ 21.669764] RPC: Registered named UNIX socket transport module.
Oct 18 21:26:33 cecil kernel: [ 21.699042] RPC: Registered udp transport module.
Oct 18 21:26:33 cecil kernel: [ 21.727314] RPC: Registered tcp transport module.
Oct 18 21:26:33 cecil kernel: [ 21.754972] RPC: Registered tcp NFSv4.1 backchannel transport module.
Oct 18 21:26:33 cecil kernel: [ 21.790433] FS-Cache: Loaded
Oct 18 21:26:33 cecil kernel: [ 21.828657] FS-Cache: Netfs 'nfs' registered for caching
Oct 18 21:26:33 cecil kernel: [ 21.860851] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Oct 18 21:26:33 cecil kernel: [ 32.845829] usb 2-10: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
Oct 18 21:26:33 cecil kernel: [ 32.892693] usb 2-10: New USB device found, idVendor=8564, idProduct=4000, bcdDevice= 0.08
Oct 18 21:26:33 cecil kernel: [ 32.920208] usb 2-10: New USB device strings: Mfr=3, Product=4, SerialNumber=5
Oct 18 21:26:33 cecil kernel: [ 32.947546] usb 2-10: Product: GL3220
Oct 18 21:26:33 cecil kernel: [ 32.974464] usb 2-10: Manufacturer: Genesys
Oct 18 21:26:33 cecil kernel: [ 33.001337] usb 2-10: SerialNumber: 000000059
Oct 18 21:26:33 cecil kernel: [ 33.040894] usb-storage 2-10:1.0: USB Mass Storage device detected
Oct 18 21:26:33 cecil kernel: [ 33.070459] scsi host6: usb-storage 2-10:1.0
Oct 18 21:26:33 cecil kernel: [ 33.097711] usbcore: registered new interface driver usb-storage
Oct 18 21:26:33 cecil kernel: [ 33.128544] usbcore: registered new interface driver uas
Oct 18 21:26:33 cecil kernel: [ 34.156765] scsi 6:0:0:0: Direct-Access Generic STORAGE DEVICE TS08 PQ: 0 ANSI: 5
Oct 18 21:26:33 cecil kernel: [ 34.187538] scsi 6:0:0:1: Direct-Access Generic STORAGE DEVICE TS08 PQ: 0 ANSI: 5
Oct 18 21:26:33 cecil kernel: [ 34.213446] scsi 6:0:0:2: Direct-Access Generic STORAGE DEVICE TS08 PQ: 0 ANSI: 5
Oct 18 21:26:33 cecil kernel: [ 34.238383] sd 6:0:0:0: Attached scsi generic sg3 type 0
Oct 18 21:26:33 cecil kernel: [ 34.240402] sd 6:0:0:0: [sdd] Attached SCSI removable disk
Oct 18 21:26:33 cecil kernel: [ 34.264995] sd 6:0:0:1: Attached scsi generic sg4 type 0
Oct 18 21:26:33 cecil kernel: [ 34.315083] sd 6:0:0:2: Attached scsi generic sg5 type 0
Oct 18 21:26:33 cecil kernel: [ 34.901593] sd 6:0:0:1: [sde] 7700480 512-byte logical blocks: (3.94 GB/3.67 GiB)
Oct 18 21:26:33 cecil kernel: [ 34.902961] sd 6:0:0:2: [sdf] Attached SCSI removable disk
Oct 18 21:26:33 cecil kernel: [ 34.933000] sd 6:0:0:1: [sde] Write Protect is off
Oct 18 21:26:33 cecil kernel: [ 34.985014] sd 6:0:0:1: [sde] Mode Sense: 21 00 00 00
Oct 18 21:26:33 cecil kernel: [ 34.985810] sd 6:0:0:1: [sde] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
Oct 18 21:26:33 cecil kernel: [ 35.014733] sde:
Oct 18 21:26:33 cecil kernel: [ 35.042271] sd 6:0:0:1: [sde] Attached SCSI removable disk
Oct 18 21:26:33 cecil kernel: [ 42.283923] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input17
Oct 18 21:26:33 cecil kernel: [ 42.456835] NET: Registered protocol family 38
Oct 18 21:26:33 cecil kernel: [ 42.544918] alg: No test for xcbc(camellia) (xcbc(camellia-asm))
Oct 18 21:26:33 cecil kernel: [ 42.563816] alg: No test for rfc3686(ctr(camellia)) (rfc3686(ctr-camellia-aesni-avx2))
Oct 18 21:26:33 cecil kernel: [ 42.746741] Initializing XFRM netlink socket
Oct 18 21:26:34 cecil kernel: [ 43.199998] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Oct 18 21:26:34 cecil kernel: [ 43.199999] Bluetooth: BNEP filters: protocol multicast
Oct 18 21:26:34 cecil kernel: [ 43.200018] Bluetooth: BNEP socket layer initialized
Oct 18 21:26:34 cecil kernel: [ 43.475463] fuse: init (API version 7.31)
Oct 18 21:26:34 cecil kernel: [ 43.566930] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
Oct 18 21:26:35 cecil kernel: [ 44.614035] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
Oct 18 21:26:35 cecil kernel: [ 44.636023] NFSD: Using legacy client tracking operations.
Oct 18 21:26:35 cecil kernel: [ 44.657807] NFSD: starting 90-second grace period (net f0000098)
Oct 18 21:26:38 cecil kernel: [ 48.028468] alg: No test for echainiv(authenc(hmac(sha256),cbc(aes))) (echainiv(authenc(hmac(sha256-avx2),cbc-aes-aesni)))
Oct 18 21:28:53 cecil kernel: [ 182.348009] FAT-fs (sde): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
Oct 18 21:29:29 cecil kernel: [ 218.540904] FAT-fs (sde): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
Oct 18 21:39:37 cecil kernel: [ 826.787350] usb 2-10: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd
Oct 18 21:39:38 cecil kernel: [ 827.588902] sd 6:0:0:1: [sde] Unaligned partial completion (resid=78, sector_sz=512)
Oct 18 21:39:38 cecil kernel: [ 827.618302] sd 6:0:0:1: [sde] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
Oct 18 21:39:38 cecil kernel: [ 827.643455] sd 6:0:0:1: [sde] tag#0 Sense Key : Unit Attention [current]
Oct 18 21:39:38 cecil kernel: [ 827.668414] sd 6:0:0:1: [sde] tag#0 Add. Sense: Not ready to ready change, medium may have changed
Oct 18 21:39:38 cecil kernel: [ 827.693497] sd 6:0:0:1: [sde] tag#0 CDB: Write(10) 2a 00 00 00 05 a6 00 02 53 00
Oct 18 21:39:38 cecil kernel: [ 827.718435] blk_update_request: I/O error, dev sde, sector 1446 op 0x1:(WRITE) flags 0x100000 phys_seg 595 prio class 0
Oct 18 21:39:38 cecil kernel: [ 827.744043] Buffer I/O error on dev sde, logical block 1446, lost async page write
Oct 18 21:39:38 cecil kernel: [ 827.769602] Buffer I/O error on dev sde, logical block 1447, lost async page write
Oct 18 21:39:38 cecil kernel: [ 827.794711] Buffer I/O error on dev sde, logical block 1448, lost async page write
Oct 18 21:39:38 cecil kernel: [ 827.819591] Buffer I/O error on dev sde, logical block 1449, lost async page write
Oct 18 21:39:38 cecil kernel: [ 827.844178] Buffer I/O error on dev sde, logical block 1450, lost async page write
Oct 18 21:39:38 cecil kernel: [ 827.868563] Buffer I/O error on dev sde, logical block 1451, lost async page write
Oct 18 21:39:38 cecil kernel: [ 827.892754] Buffer I/O error on dev sde, logical block 1452, lost async page write
Oct 18 21:39:38 cecil kernel: [ 827.916605] Buffer I/O error on dev sde, logical block 1453, lost async page write
Oct 18 21:39:38 cecil kernel: [ 827.940105] Buffer I/O error on dev sde, logical block 1454, lost async page write
Oct 18 21:39:38 cecil kernel: [ 827.963153] Buffer I/O error on dev sde, logical block 1455, lost async page write
Oct 18 21:39:38 cecil kernel: [ 827.986126] sd 6:0:0:1: [sde] tag#0 device offline or changed
Oct 18 21:39:38 cecil kernel: [ 828.009098] blk_update_request: I/O error, dev sde, sector 2041 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0
Oct 18 21:39:38 cecil kernel: [ 828.032860] FAT-fs (sde): FAT read failed (blocknr 2041)
Oct 18 21:39:38 cecil kernel: [ 828.057103] sd 6:0:0:1: [sde] tag#0 device offline or changed
Oct 18 21:39:38 cecil kernel: [ 828.080690] blk_update_request: I/O error, dev sde, sector 8899 op 0x1:(WRITE) flags 0x100000 phys_seg 1 prio class 0
Oct 18 21:39:39 cecil kernel: [ 828.496487] VFS: busy inodes on changed media or resized disk sde
Oct 18 21:39:40 cecil kernel: [ 830.068464] usb 2-10: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd
Oct 18 21:39:41 cecil kernel: [ 830.857736] sd 6:0:0:1: [sde] Unaligned partial completion (resid=78, sector_sz=512)
Oct 18 21:39:41 cecil kernel: [ 830.887512] sd 6:0:0:1: [sde] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
Oct 18 21:39:41 cecil kernel: [ 830.913140] sd 6:0:0:1: [sde] tag#0 Sense Key : Unit Attention [current]
Oct 18 21:39:41 cecil kernel: [ 830.938788] sd 6:0:0:1: [sde] tag#0 Add. Sense: Not ready to ready change, medium may have changed
Oct 18 21:39:41 cecil kernel: [ 830.964753] sd 6:0:0:1: [sde] tag#0 CDB: Write(10) 2a 00 00 1f 8c d0 00 08 00 00
Oct 18 21:39:41 cecil kernel: [ 830.990831] blk_update_request: I/O error, dev sde, sector 2067664 op 0x1:(WRITE) flags 0x4000 phys_seg 2 prio class 0
Oct 18 21:39:41 cecil kernel: [ 831.019212] sd 6:0:0:1: [sde] tag#0 device offline or changed
Oct 18 21:39:41 cecil kernel: [ 831.045438] blk_update_request: I/O error, dev sde, sector 2069712 op 0x1:(WRITE) flags 0x4000 phys_seg 2 prio class 0
Oct 18 21:39:41 cecil kernel: [ 831.072541] sd 6:0:0:1: [sde] tag#0 device offline or changed
Oct 18 21:39:41 cecil kernel: [ 831.099725] blk_update_request: I/O error, dev sde, sector 2071760 op 0x1:(WRITE) flags 0x4000 phys_seg 117 prio class 0
Oct 18 21:39:41 cecil kernel: [ 831.128093] sd 6:0:0:1: [sde] tag#0 device offline or changed
Oct 18 21:39:41 cecil kernel: [ 831.156105] blk_update_request: I/O error, dev sde, sector 2073808 op 0x1:(WRITE) flags 0x0 phys_seg 136 prio class 0
Oct 18 21:39:42 cecil kernel: [ 831.578510] usb 2-10: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd
Oct 18 21:39:43 cecil kernel: [ 832.412915] sd 6:0:0:1: [sde] Unaligned partial completion (resid=78, sector_sz=512)
Oct 18 21:39:43 cecil kernel: [ 832.447357] sd 6:0:0:1: [sde] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
Oct 18 21:39:43 cecil kernel: [ 832.477797] sd 6:0:0:1: [sde] tag#0 Sense Key : Unit Attention [current]
Oct 18 21:39:43 cecil kernel: [ 832.508319] sd 6:0:0:1: [sde] tag#0 Add. Sense: Not ready to ready change, medium may have changed
Oct 18 21:39:43 cecil kernel: [ 832.539256] sd 6:0:0:1: [sde] tag#0 CDB: Write(10) 2a 00 00 1f aa 68 00 08 00 00
Oct 18 21:39:43 cecil kernel: [ 832.570175] blk_update_request: I/O error, dev sde, sector 2075240 op 0x1:(WRITE) flags 0x4000 phys_seg 112 prio class 0
Oct 18 21:39:43 cecil kernel: [ 832.601856] sd 6:0:0:1: [sde] tag#0 device offline or changed
Oct 18 21:39:43 cecil kernel: [ 832.633646] blk_update_request: I/O error, dev sde, sector 2077288 op 0x1:(WRITE) flags 0x4000 phys_seg 79 prio class 0
Oct 18 21:39:43 cecil kernel: [ 832.666072] sd 6:0:0:1: [sde] tag#0 device offline or changed
Oct 18 21:39:43 cecil kernel: [ 832.698640] blk_update_request: I/O error, dev sde, sector 2079336 op 0x1:(WRITE) flags 0x0 phys_seg 67 prio class 0
Oct 18 21:39:43 cecil kernel: [ 832.732527] sd 6:0:0:1: [sde] tag#0 device offline or changed
Oct 18 21:39:43 cecil kernel: [ 832.765285] blk_update_request: I/O error, dev sde, sector 2080696 op 0x1:(WRITE) flags 0x4000 phys_seg 200 prio class 0
Oct 18 21:39:44 cecil kernel: [ 833.208555] usb 2-10: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd
Oct 18 21:39:44 cecil kernel: [ 833.853646] sd 6:0:0:1: [sde] Unaligned partial completion (resid=78, sector_sz=512)
Oct 18 21:39:44 cecil kernel: [ 833.892790] sd 6:0:0:1: [sde] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
Oct 18 21:39:44 cecil kernel: [ 833.927667] sd 6:0:0:1: [sde] tag#0 Sense Key : Unit Attention [current]
Oct 18 21:39:44 cecil kernel: [ 833.962568] sd 6:0:0:1: [sde] tag#0 Add. Sense: Not ready to ready change, medium may have changed
Oct 18 21:39:44 cecil kernel: [ 833.997441] sd 6:0:0:1: [sde] tag#0 CDB: Write(10) 2a 00 00 1f c7 b8 00 05 18 00
Oct 18 21:39:44 cecil kernel: [ 834.031990] blk_update_request: I/O error, dev sde, sector 2082744 op 0x1:(WRITE) flags 0x0 phys_seg 77 prio class 0
Oct 18 21:39:44 cecil kernel: [ 834.067264] sd 6:0:0:1: [sde] tag#0 device offline or changed
Oct 18 21:39:44 cecil kernel: [ 834.103417] blk_update_request: I/O error, dev sde, sector 1 op 0x1:(WRITE) flags 0x0 phys_seg 1 prio class 0
Oct 18 21:39:44 cecil kernel: [ 834.103563] VFS: busy inodes on changed media or resized disk sde
Oct 18 21:39:44 cecil kernel: [ 834.140577] buffer_io_error: 586 callbacks suppressed
Oct 18 21:39:44 cecil kernel: [ 834.140578] Buffer I/O error on dev sde, logical block 1, lost async page write
Oct 18 21:39:45 cecil kernel: [ 834.249552] sd 6:0:0:1: [sde] tag#0 device offline or changed
Oct 18 21:39:45 cecil kernel: [ 834.285641] blk_update_request: I/O error, dev sde, sector 2040 op 0x1:(WRITE) flags 0x0 phys_seg 192 prio class 0
Oct 18 21:39:45 cecil kernel: [ 834.322162] Buffer I/O error on dev sde, logical block 2040, lost async page write
Oct 18 21:39:45 cecil kernel: [ 834.358739] Buffer I/O error on dev sde, logical block 2041, lost async page write
Oct 18 21:39:45 cecil kernel: [ 834.395016] Buffer I/O error on dev sde, logical block 2042, lost async page write
Oct 18 21:39:45 cecil kernel: [ 834.430911] Buffer I/O error on dev sde, logical block 2043, lost async page write
Oct 18 21:39:45 cecil kernel: [ 834.466528] Buffer I/O error on dev sde, logical block 2044, lost async page write
Oct 18 21:39:45 cecil kernel: [ 834.501715] Buffer I/O error on dev sde, logical block 2045, lost async page write
Oct 18 21:39:45 cecil kernel: [ 834.536480] Buffer I/O error on dev sde, logical block 2046, lost async page write
Oct 18 21:39:45 cecil kernel: [ 834.570971] Buffer I/O error on dev sde, logical block 2047, lost async page write
Oct 18 21:39:45 cecil kernel: [ 834.605187] Buffer I/O error on dev sde, logical block 2048, lost async page write
Oct 18 21:39:45 cecil kernel: [ 834.638622] sd 6:0:0:1: [sde] tag#0 device offline or changed
Oct 18 21:39:45 cecil kernel: [ 834.671457] blk_update_request: I/O error, dev sde, sector 9552 op 0x1:(WRITE) flags 0x0 phys_seg 192 prio class 0
Oct 18 21:39:45 cecil kernel: [ 834.705266] sd 6:0:0:1: [sde] tag#0 device offline or changed
Oct 18 21:39:45 cecil kernel: [ 834.738599] blk_update_request: I/O error, dev sde, sector 15056 op 0x1:(WRITE) flags 0x0 phys_seg 1 prio class 0
Oct 18 21:39:45 cecil kernel: [ 834.772392] sd 6:0:0:1: [sde] tag#0 device offline or changed
Oct 18 21:39:45 cecil kernel: [ 834.806033] blk_update_request: I/O error, dev sde, sector 1865945 op 0x1:(WRITE) flags 0x0 phys_seg 1 prio class 0
Oct 18 21:39:45 cecil kernel: [ 834.840713] sd 6:0:0:1: [sde] tag#0 device offline or changed
Oct 18 21:39:45 cecil kernel: [ 834.874796] blk_update_request: I/O error, dev sde, sector 1865946 op 0x1:(WRITE) flags 0x0 phys_seg 2 prio class 0
Oct 18 21:39:45 cecil kernel: [ 834.911973] VFS: busy inodes on changed media or resized disk sde
Oct 18 21:41:50 cecil kernel: [ 959.694637] usb 2-10: USB disconnect, device number 2
Oct 18 21:43:02 cecil kernel: [ 1031.854837] usb 2-5: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd
Oct 18 21:43:02 cecil kernel: [ 1031.909708] usb 2-5: New USB device found, idVendor=8564, idProduct=4000, bcdDevice= 0.08
Oct 18 21:43:02 cecil kernel: [ 1031.945013] usb 2-5: New USB device strings: Mfr=3, Product=4, SerialNumber=5
Oct 18 21:43:02 cecil kernel: [ 1031.980581] usb 2-5: Product: GL3220
Oct 18 21:43:02 cecil kernel: [ 1032.016275] usb 2-5: Manufacturer: Genesys
Oct 18 21:43:02 cecil kernel: [ 1032.052110] usb 2-5: SerialNumber: 000000059
Oct 18 21:43:02 cecil kernel: [ 1032.090709] usb-storage 2-5:1.0: USB Mass Storage device detected
Oct 18 21:43:02 cecil kernel: [ 1032.128724] scsi host6: usb-storage 2-5:1.0
Oct 18 21:43:04 cecil kernel: [ 1033.221774] scsi 6:0:0:0: Direct-Access Generic STORAGE DEVICE TS08 PQ: 0 ANSI: 5
Oct 18 21:43:04 cecil kernel: [ 1033.263147] scsi 6:0:0:1: Direct-Access Generic STORAGE DEVICE TS08 PQ: 0 ANSI: 5
Oct 18 21:43:04 cecil kernel: [ 1033.299605] scsi 6:0:0:2: Direct-Access Generic STORAGE DEVICE TS08 PQ: 0 ANSI: 5
Oct 18 21:43:04 cecil kernel: [ 1033.334960] sd 6:0:0:0: Attached scsi generic sg3 type 0
Oct 18 21:43:04 cecil kernel: [ 1033.336459] sd 6:0:0:0: [sdd] Attached SCSI removable disk
Oct 18 21:43:04 cecil kernel: [ 1033.372328] scsi 6:0:0:1: Attached scsi generic sg4 type 0
Oct 18 21:43:04 cecil kernel: [ 1033.443453] scsi 6:0:0:2: Attached scsi generic sg5 type 0
Oct 18 21:43:04 cecil kernel: [ 1033.882517] sd 6:0:0:1: [sde] 7700480 512-byte logical blocks: (3.94 GB/3.67 GiB)
Oct 18 21:43:04 cecil kernel: [ 1033.883016] sd 6:0:0:2: [sdf] Attached SCSI removable disk
Oct 18 21:43:04 cecil kernel: [ 1033.919488] sd 6:0:0:1: [sde] Write Protect is off
Oct 18 21:43:04 cecil kernel: [ 1033.989707] sd 6:0:0:1: [sde] Mode Sense: 21 00 00 00
Oct 18 21:43:04 cecil kernel: [ 1033.990550] sd 6:0:0:1: [sde] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
Oct 18 21:43:04 cecil kernel: [ 1034.027282] sde:
Oct 18 21:43:04 cecil kernel: [ 1034.062517] sd 6:0:0:1: [sde] Attached SCSI removable disk
Oct 18 21:46:07 cecil kernel: [ 1217.064708] usb 2-5: USB disconnect, device number 3
Oct 18 22:47:43 cecil kernel: [ 4913.074011] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
Oct 18 23:57:56 cecil kernel: [ 9125.530091] nfsd: last server has exited, flushing export cache
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: 5.3.6: I/O error on writing SD card via USB3
2019-10-19 4:26 5.3.6: I/O error on writing SD card via USB3 Harald Dunkel
@ 2019-10-19 14:57 ` Alan Stern
2019-10-21 16:38 ` Harald Dunkel
0 siblings, 1 reply; 6+ messages in thread
From: Alan Stern @ 2019-10-19 14:57 UTC (permalink / raw)
To: Harald Dunkel; +Cc: USB list
On Sat, 19 Oct 2019, Harald Dunkel wrote:
> Hi folks,
>
> I've got an USB3 SD card adapter (device info attached). Problem:
> Writing a (rather slow 133x) SD card via an USB3 slot I get I/O errors,
> see attached kern.log. If I use an USB2 slot, then there is no problem
> (not shown here).
>
> The I/O errors don't come up immediately, but after a few minutes
> writing time, so I wonder if this is a heat problem?
>
> Since modern PCs don't have USB2 slots anymore I would be highly
> interested in a workaround. Kernel is 5.3.6 built from the git
> repository.
>
>
> Every helpful hint is highly appreciated.
What happens if you don't use that rather slow 133x SD card? Do other
cards work better?
Another possibility: If you attach the card adapter by a USB-2 cable
then it will run as a USB-2 device (even when plugged into a USB-3
port). That probably would help -- although it would also slow down
the data transfers. Although, come to think of it, slowing down the
transfer rate may be just what this card needs...
Alan Stern
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: 5.3.6: I/O error on writing SD card via USB3
2019-10-19 14:57 ` Alan Stern
@ 2019-10-21 16:38 ` Harald Dunkel
2019-10-21 17:48 ` Alan Stern
0 siblings, 1 reply; 6+ messages in thread
From: Harald Dunkel @ 2019-10-21 16:38 UTC (permalink / raw)
To: Alan Stern; +Cc: USB list
Hi Alan,
On 10/19/19 4:57 PM, Alan Stern wrote:
>
> What happens if you don't use that rather slow 133x SD card? Do other
> cards work better?
>
No problem with a 32 GByte SDHC card (U1).
> Another possibility: If you attach the card adapter by a USB-2 cable
> then it will run as a USB-2 device (even when plugged into a USB-3
> port). That probably would help -- although it would also slow down
> the data transfers. Although, come to think of it, slowing down the
> transfer rate may be just what this card needs...
>
The USB2 cable worked, too. Actually I had expected that the speed is
reduced automatically according to the specs of the card. ???
Regards
Harri
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: 5.3.6: I/O error on writing SD card via USB3
2019-10-21 16:38 ` Harald Dunkel
@ 2019-10-21 17:48 ` Alan Stern
2019-10-22 16:34 ` Harald Dunkel
0 siblings, 1 reply; 6+ messages in thread
From: Alan Stern @ 2019-10-21 17:48 UTC (permalink / raw)
To: Harald Dunkel; +Cc: USB list
On Mon, 21 Oct 2019, Harald Dunkel wrote:
> Hi Alan,
>
> On 10/19/19 4:57 PM, Alan Stern wrote:
> >
> > What happens if you don't use that rather slow 133x SD card? Do other
> > cards work better?
> >
>
> No problem with a 32 GByte SDHC card (U1).
>
> > Another possibility: If you attach the card adapter by a USB-2 cable
> > then it will run as a USB-2 device (even when plugged into a USB-3
> > port). That probably would help -- although it would also slow down
> > the data transfers. Although, come to think of it, slowing down the
> > transfer rate may be just what this card needs...
> >
>
> The USB2 cable worked, too. Actually I had expected that the speed is
> reduced automatically according to the specs of the card. ???
That is doubtful. The speed of the connection is determined when the
connection is first set up. Unless the reader disconnects itself from
the USB bus when a card is removed and reconnects when a card is
inserted, the speed can't change.
You can see what the current connection speed is (in units of millions
of bits per second) by looking in sysfs. For example:
cat /sys/bus/usb/devices/2-10/speed
(or maybe 2-5 instead of 2-10; both paths appeared in the kernel log
you posted earlier).
At any rate, it sounds like the 133x card is just too slow to keep up.
Alan Stern
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: 5.3.6: I/O error on writing SD card via USB3
2019-10-21 17:48 ` Alan Stern
@ 2019-10-22 16:34 ` Harald Dunkel
2019-10-22 16:53 ` Alan Stern
0 siblings, 1 reply; 6+ messages in thread
From: Harald Dunkel @ 2019-10-22 16:34 UTC (permalink / raw)
To: Alan Stern; +Cc: USB list
Hi Alan,
On 10/21/19 7:48 PM, Alan Stern wrote:
> On Mon, 21 Oct 2019, Harald Dunkel wrote:
>
>>
>> The USB2 cable worked, too. Actually I had expected that the speed is
>> reduced automatically according to the specs of the card. ???
>
> That is doubtful. The speed of the connection is determined when the
> connection is first set up. Unless the reader disconnects itself from
> the USB bus when a card is removed and reconnects when a card is
> inserted, the speed can't change.
>
:
:
>
> At any rate, it sounds like the 133x card is just too slow to keep up.
>
AFAIU the SD card is accessed similar to other block devices. There shouldn't
be any I/O errors on writing to a slow device, unless hardware or software are
faulty. The data to write is cached.
Anyway, I got a new USB3 card reader today: No problem with it, even though
I wrote to the same slow SD card. Since the old SD card reader works OK using
USB2, I would either assume a bug in the XHCI driver for the old device, or a
hardware failure.
Would you agree to this conclusion?
Regards
Harri
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: 5.3.6: I/O error on writing SD card via USB3
2019-10-22 16:34 ` Harald Dunkel
@ 2019-10-22 16:53 ` Alan Stern
0 siblings, 0 replies; 6+ messages in thread
From: Alan Stern @ 2019-10-22 16:53 UTC (permalink / raw)
To: Harald Dunkel; +Cc: USB list
On Tue, 22 Oct 2019, Harald Dunkel wrote:
> Hi Alan,
>
> On 10/21/19 7:48 PM, Alan Stern wrote:
> > On Mon, 21 Oct 2019, Harald Dunkel wrote:
> >
> >>
> >> The USB2 cable worked, too. Actually I had expected that the speed is
> >> reduced automatically according to the specs of the card. ???
> >
> > That is doubtful. The speed of the connection is determined when the
> > connection is first set up. Unless the reader disconnects itself from
> > the USB bus when a card is removed and reconnects when a card is
> > inserted, the speed can't change.
> >
> :
> :
> >
> > At any rate, it sounds like the 133x card is just too slow to keep up.
> >
>
>
> AFAIU the SD card is accessed similar to other block devices. There shouldn't
> be any I/O errors on writing to a slow device, unless hardware or software are
> faulty. The data to write is cached.
>
> Anyway, I got a new USB3 card reader today: No problem with it, even though
> I wrote to the same slow SD card. Since the old SD card reader works OK using
> USB2, I would either assume a bug in the XHCI driver for the old device, or a
> hardware failure.
>
> Would you agree to this conclusion?
Yes, except that I would go even farther. Since the same xhci-hcd
driver works okay for your new card reader and the old card, I would
rule out an error in the driver or the card. This means that the
hardware/firmware in the old reader is most likely to be at fault.
Alan Stern
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2019-10-22 16:53 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-10-19 4:26 5.3.6: I/O error on writing SD card via USB3 Harald Dunkel
2019-10-19 14:57 ` Alan Stern
2019-10-21 16:38 ` Harald Dunkel
2019-10-21 17:48 ` Alan Stern
2019-10-22 16:34 ` Harald Dunkel
2019-10-22 16:53 ` Alan Stern
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).