* No block device created for NVMe SSD attached to Lindy enclosure
@ 2019-12-20 13:36 Paul Menzel
2019-12-20 16:04 ` Alan Stern
0 siblings, 1 reply; 2+ messages in thread
From: Paul Menzel @ 2019-12-20 13:36 UTC (permalink / raw)
To: Alan Stern; +Cc: linux-usb, it+linux-usb
[-- Attachment #1.1: Type: text/plain, Size: 6287 bytes --]
Dear Linux folks,
With Linux 5.4.2 and 5.5-rc2 (no USB_UAS selected), attaching the
Lindy USB 3.1 M.2 / mSATA enclosure with a Samsung PM981 attached to
the enclosure over USB 3, the Linux kernel says, a block device is
created, but `lsblk` does not show it.
This is with Debian’s Linux 5.4.2 from Debian experimental, and
systemd 244.
```
$ dmesg
[…]
[ 457.016225] usb 3-2: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[ 457.037233] usb 3-2: New USB device found, idVendor=174c, idProduct=55aa, bcdDevice= 1.00
[ 457.037238] usb 3-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 457.037242] usb 3-2: Product: ASM1351
[ 457.037244] usb 3-2: Manufacturer: Asmedia
[ 457.037247] usb 3-2: SerialNumber: 00000000000000000001
[ 457.038599] probe of 3-2 returned 1 after 1114 usecs
[ 457.064790] calling usb_storage_driver_init+0x0/0x1000 [usb_storage] @ 790
[ 457.064840] usb-storage 3-2:1.0: USB Mass Storage device detected
[ 457.065548] usb-storage 3-2:1.0: Quirks match for vid 174c pid 55aa: 400000
[ 457.065578] scsi host2: usb-storage 3-2:1.0
[ 457.065668] probe of 3-2:1.0 returned 1 after 839 usecs
[ 457.065682] usbcore: registered new interface driver usb-storage
[ 457.065692] initcall usb_storage_driver_init+0x0/0x1000 [usb_storage] returned 0 after 871 usecs
[ 457.068240] calling uas_driver_init+0x0/0x1000 [uas] @ 790
[ 457.068262] usbcore: registered new interface driver uas
[ 457.068265] initcall uas_driver_init+0x0/0x1000 [uas] returned 0 after 21 usecs
[ 458.088650] scsi 2:0:0:0: Direct-Access ASMT 2135 0 PQ: 0 ANSI: 6
[ 458.088890] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 458.128750] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 458.128774] probe of 2:0:0:0 returned 1 after 39976 usecs
$ lsblk --version
lsblk from util-linux 2.34
$ lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:0 0 238,5G 0 disk
├─sda1 8:1 0 128M 0 part /boot/efi
├─sda2 8:2 0 128M 0 part /boot
└─sda3 8:3 0 238,2G 0 part
└─sda3_crypt 254:0 0 238,2G 0 crypt /
```
Do you have an idea, why the block device is not created? Is a
special udev rule needed?
Kind regards,
Paul
PS: Here is the verbose lsusb output of the enclosure with no
disk connected.
```
$ sudo lsusb -v
Bus 002 Device 010: ID 174c:55aa ASMedia Technology Inc. Name: ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge, ASM1153E SATA 6Gb/s bridge
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 3.10
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 9
idVendor 0x174c ASMedia Technology Inc.
idProduct 0x55aa Name: ASM1051E SATA 6Gb/s bridge, ASM1053E SATA 6Gb/s bridge, ASM1153 SATA 3Gb/s bridge, ASM1153E SATA 6Gb/s bridge
bcdDevice 1.00
iManufacturer 2 Asmedia
iProduct 3 ASM1351
iSerial 1 00000000000000000001
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x002c
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk-Only
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 15
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 15
Binary Object Store Descriptor:
bLength 5
bDescriptorType 15
wTotalLength 0x002a
bNumDeviceCaps 3
USB 2.0 Extension Device Capability:
bLength 7
bDescriptorType 16
bDevCapabilityType 2
bmAttributes 0x0000f41e
BESL Link Power Management (LPM) Supported
BESL value 1024 us
Deep BESL value 61440 us
SuperSpeed USB Device Capability:
bLength 10
bDescriptorType 16
bDevCapabilityType 3
bmAttributes 0x00
wSpeedsSupported 0x000e
Device can operate at Full Speed (12Mbps)
Device can operate at High Speed (480Mbps)
Device can operate at SuperSpeed (5Gbps)
bFunctionalitySupport 1
Lowest fully-functional device speed is Full Speed (12Mbps)
bU1DevExitLat 10 micro seconds
bU2DevExitLat 2047 micro seconds
SuperSpeedPlus USB Device Capability:
bLength 20
bDescriptorType 16
bDevCapabilityType 10
bmAttributes 0x00000001
Sublink Speed Attribute count 1
Sublink Speed ID count 0
wFunctionalitySupport 0x1100
bmSublinkSpeedAttr[0] 0x000a4030
Speed Attribute ID: 0 10Gb/s Symmetric RX SuperSpeedPlus
bmSublinkSpeedAttr[1] 0x000a40b0
Speed Attribute ID: 0 10Gb/s Symmetric TX SuperSpeedPlus
can't get debug descriptor: Resource temporarily unavailable
Device Status: 0x000d
Self Powered
U1 Enabled
U2 Enabled
[…]
```
[-- Attachment #1.2: linux-5.4.2-messages.txt --]
[-- Type: text/plain, Size: 168113 bytes --]
[ 0.000000] microcode: microcode updated early to revision 0x2e, date = 2019-06-13
[ 0.000000] Linux version 5.4.0-trunk-amd64 (debian-kernel@lists.debian.org) (gcc version 9.2.1 20191130 (Debian 9.2.1-21)) #1 SMP Debian 5.4.2-1~exp1 (2019-12-05)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-5.4.0-trunk-amd64 root=UUID=aa6034bb-8cc1-4111-a0a7-9b3f5e13e281 ro quiet noisapnp initcall_debug log_buf_len=8M random.trust_cpu=on cryptomgr.notests i915.fastboot=0 systemd.verity=0
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf4b7fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf4b8000-0x00000000bf938fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf939000-0x00000000d9d9afff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d9d9b000-0x00000000d9ed6fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d9ed7000-0x00000000d9f07fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000d9f08000-0x00000000da96bfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000da96c000-0x00000000daddcfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000daddd000-0x00000000dba5efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dba5f000-0x00000000dbafefff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000dbaff000-0x00000000dbafffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dd000000-0x00000000df7fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041e7fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.31 by American Megatrends
[ 0.000000] efi: ACPI=0xd9ee4000 ACPI 2.0=0xd9ee4000 SMBIOS=0xf0000
[ 0.000000] secureboot: Secure boot could not be determined (mode 0)
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: Dell Inc. Latitude E7250/0TVD2T, BIOS A19 01/23/2018
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] last_pfn = 0x41e800 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7C00000000 write-back
[ 0.000000] 1 base 0400000000 mask 7FF0000000 write-back
[ 0.000000] 2 base 0410000000 mask 7FF8000000 write-back
[ 0.000000] 3 base 0418000000 mask 7FFC000000 write-back
[ 0.000000] 4 base 041C000000 mask 7FFE000000 write-back
[ 0.000000] 5 base 041E000000 mask 7FFF800000 write-back
[ 0.000000] 6 base 00E0000000 mask 7FE0000000 uncachable
[ 0.000000] 7 base 00DE000000 mask 7FFE000000 uncachable
[ 0.000000] 8 base 00DD000000 mask 7FFF000000 uncachable
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] e820: update [mem 0xdd000000-0xffffffff] usable ==> reserved
[ 0.000000] last_pfn = 0xdbb00 max_arch_pfn = 0x400000000
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x3bfe01000, 0x3bfe01fff] PGTABLE
[ 0.000000] BRK [0x3bfe02000, 0x3bfe02fff] PGTABLE
[ 0.000000] BRK [0x3bfe03000, 0x3bfe03fff] PGTABLE
[ 0.000000] BRK [0x3bfe04000, 0x3bfe04fff] PGTABLE
[ 0.000000] BRK [0x3bfe05000, 0x3bfe05fff] PGTABLE
[ 0.000000] BRK [0x3bfe06000, 0x3bfe06fff] PGTABLE
[ 0.000000] BRK [0x3bfe07000, 0x3bfe07fff] PGTABLE
[ 0.000000] BRK [0x3bfe08000, 0x3bfe08fff] PGTABLE
[ 0.000000] BRK [0x3bfe09000, 0x3bfe09fff] PGTABLE
[ 0.000000] BRK [0x3bfe0a000, 0x3bfe0afff] PGTABLE
[ 0.000000] BRK [0x3bfe0b000, 0x3bfe0bfff] PGTABLE
[ 0.000000] BRK [0x3bfe0c000, 0x3bfe0cfff] PGTABLE
[ 0.000000] printk: log_buf_len: 8388608 bytes
[ 0.000000] printk: early log buf free: 125924(96%)
[ 0.000000] RAMDISK: [mem 0x36eaf000-0x3774efff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000D9EE4000 000024 (v02 DELL )
[ 0.000000] ACPI: XSDT 0x00000000D9EE40B8 0000EC (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000D9EF8A28 00010C (v05 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000D9EE4230 0147F6 (v02 DELL CBX3 01072009 INTL 20120913)
[ 0.000000] ACPI: FACS 0x00000000DADDBF80 000040
[ 0.000000] ACPI: UEFI 0x00000000D9EF9000 00063A (v01 INTEL RstSataE 00000000 ?? 00000000)
[ 0.000000] ACPI: APIC 0x00000000D9EF9640 000084 (v03 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000D9EF96C8 000044 (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: FIDT 0x00000000D9EF9710 00009C (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x00000000D9EF97B0 00003C (v01 DELL CBX3 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000D9EF97F0 000038 (v01 DELL CBX3 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000D9EF9828 0004B5 (v01 SataRe SataTabl 00001000 INTL 20120913)
[ 0.000000] ACPI: UEFI 0x00000000D9EF9CE0 000042 (v01 00000000 00000000)
[ 0.000000] ACPI: SSDT 0x00000000D9EF9D28 000C7D (v02 Ther_R Ther_Rvp 00001000 INTL 20120913)
[ 0.000000] ACPI: ASF! 0x00000000D9EFA9A8 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.000000] ACPI: SSDT 0x00000000D9EFAA48 00051F (v02 PmRef Cpu0Ist 00003000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000D9EFAF68 000B74 (v02 CpuRef CpuSsdt 00003000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000D9EFBAE0 0001C7 (v02 PmRef LakeTiny 00003000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000D9EFBCA8 0003A5 (v02 CppcTa CppcTabl 00001000 INTL 20120913)
[ 0.000000] ACPI: PCCT 0x00000000D9EFC050 00006E (v05 PcctTa PcctTabl 00001000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000D9EFC0C0 000AC4 (v02 Cpc_Ta Cpc_Tabl 00001000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000D9EFCB88 0041AC (v02 SaSsdt SaSsdt 00003000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000D9F00D38 004508 (v01 DptfTa DptfTabl 00001000 INTL 20120913)
[ 0.000000] ACPI: TCPA 0x00000000D9F05240 000032 (v02 ALASKA NAPAASF 00000001 MSFT 01000013)
[ 0.000000] ACPI: SSDT 0x00000000D9F05278 000597 (v01 AMITCG _SynTCG_ 00000001 INTL 20120913)
[ 0.000000] ACPI: DMAR 0x00000000D9F05810 0000B0 (v01 INTEL BDW 00000001 INTL 00000001)
[ 0.000000] ACPI: BGRT 0x00000000D9F058C0 000038 (v00 01072009 AMI 00010013)
[ 0.000000] ACPI: UEFI 0x00000000D9F058F8 000044 (v01 INTEL RstSataR 00000000 ?? 00000000)
[ 0.000000] ACPI: UEFI 0x00000000D9F05940 00005C (v01 INTEL RstSataV 00000000 ?? 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000041e7fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x41dffa000-0x41dffefff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000041e7fffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000bf4b7fff]
[ 0.000000] node 0: [mem 0x00000000bf939000-0x00000000d9d9afff]
[ 0.000000] node 0: [mem 0x00000000d9f08000-0x00000000da96bfff]
[ 0.000000] node 0: [mem 0x00000000dbaff000-0x00000000dbafffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000041e7fffff]
[ 0.000000] Zeroed struct page in unavailable ranges: 23781 pages
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000041e7fffff]
[ 0.000000] On node 0 totalpages: 4164379
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 22 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13902 pages used for memmap
[ 0.000000] DMA32 zone: 889727 pages, LIFO batch:63
[ 0.000000] Normal zone: 51104 pages used for memmap
[ 0.000000] Normal zone: 3270656 pages, LIFO batch:63
[ 0.000000] Reserving Intel graphics memory at [mem 0xdd800000-0xdf7fffff]
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] low level lint[0xcc])
[ 0.000000] ACPI: NMI not connected to LINT 1!
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl edge lint[0x4c])
[ 0.000000] ACPI: NMI not connected to LINT 1!
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl res lint[0x0])
[ 0.000000] ACPI: NMI not connected to LINT 1!
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] res dfl lint[0x8b])
[ 0.000000] ACPI: NMI not connected to LINT 1!
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf4b8000-0xbf938fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd9d9b000-0xd9ed6fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd9ed7000-0xd9f07fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xda96c000-0xdaddcfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdaddd000-0xdba5efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdba5f000-0xdbafefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdbb00000-0xdcffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdd000000-0xdf7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf800000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] [mem 0xdf800000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 53 pages/cpu s178584 r8192 d30312 u524288
[ 0.000000] pcpu-alloc: s178584 r8192 d30312 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 4099287
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-5.4.0-trunk-amd64 root=UUID=aa6034bb-8cc1-4111-a0a7-9b3f5e13e281 ro quiet noisapnp initcall_debug log_buf_len=8M random.trust_cpu=on cryptomgr.notests i915.fastboot=0 systemd.verity=0
[ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16175440K/16657516K available (10243K kernel code, 1197K rwdata, 3732K rodata, 1664K init, 2060K bss, 482076K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] ftrace: allocating 33542 entries in 132 pages
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 33024, nr_irqs: 728, preallocated irqs: 16
[ 0.000000] random: crng done (trusting CPU's manufacturer)
[ 0.000000] calling con_init+0x0/0x228 @ 0
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] printk: console [tty0] enabled
[ 0.000000] initcall con_init+0x0/0x228 returned 0 after 0 usecs
[ 0.000000] calling hvc_console_init+0x0/0x14 @ 0
[ 0.000000] initcall hvc_console_init+0x0/0x14 returned 0 after 0 usecs
[ 0.000000] calling xen_cons_init+0x0/0x50 @ 0
[ 0.000000] initcall xen_cons_init+0x0/0x50 returned 0 after 0 usecs
[ 0.000000] calling univ8250_console_init+0x0/0x27 @ 0
[ 0.000000] initcall univ8250_console_init+0x0/0x27 returned 0 after 0 usecs
[ 0.000000] ACPI: Core revision 20190816
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] APIC: Switch to symmetric I/O mode setup
[ 0.000000] DMAR: Host address width 39
[ 0.000000] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.000000] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e1ff0505e
[ 0.000000] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.000000] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
[ 0.000000] DMAR: RMRR base: 0x000000db9b7000 end: 0x000000db9c5fff
[ 0.000000] DMAR: RMRR base: 0x000000dd000000 end: 0x000000df7fffff
[ 0.000000] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.000000] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.000000] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[ 0.000000] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[ 0.000000] DMAR-IR: Enabled IRQ remapping in xapic mode
[ 0.000000] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.024000] tsc: PIT calibration matches HPET. 1 loops
[ 0.024000] tsc: Detected 2594.009 MHz processor
[ 0.000002] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x256420d7168, max_idle_ns: 440795282152 ns
[ 0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 5188.01 BogoMIPS (lpj=10376036)
[ 0.000005] pid_max: default: 32768 minimum: 301
[ 0.004452] LSM: Security Framework initializing
[ 0.004457] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.004472] AppArmor: AppArmor initialized
[ 0.004473] TOMOYO Linux initialized
[ 0.004508] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.004535] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.004723] mce: CPU0: Thermal monitoring enabled (TM1)
[ 0.004732] process: using mwait in idle threads
[ 0.004734] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.004735] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.004737] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.004738] Spectre V2 : Mitigation: Full generic retpoline
[ 0.004738] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.004739] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.004740] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.004740] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[ 0.004741] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.004744] TAA: Mitigation: Clear CPU buffers
[ 0.004744] MDS: Mitigation: Clear CPU buffers
[ 0.004933] Freeing SMP alternatives memory: 24K
[ 0.006890] TSC deadline timer enabled
[ 0.006891] smpboot: CPU0: Intel(R) Core(TM) i7-5600U CPU @ 2.60GHz (family: 0x6, model: 0x3d, stepping: 0x4)
[ 0.006968] calling trace_init_flags_sys_enter+0x0/0xf @ 1
[ 0.006970] initcall trace_init_flags_sys_enter+0x0/0xf returned 0 after 0 usecs
[ 0.006972] calling trace_init_flags_sys_exit+0x0/0xf @ 1
[ 0.006974] initcall trace_init_flags_sys_exit+0x0/0xf returned 0 after 0 usecs
[ 0.006974] calling init_hw_perf_events+0x0/0x51c @ 1
[ 0.006975] Performance Events: PEBS fmt2+, Broadwell events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.006979] ... version: 3
[ 0.006980] ... bit width: 48
[ 0.006980] ... generic registers: 4
[ 0.006980] ... value mask: 0000ffffffffffff
[ 0.006981] ... max period: 00007fffffffffff
[ 0.006981] ... fixed-purpose events: 3
[ 0.006982] ... event mask: 000000070000000f
[ 0.006989] initcall init_hw_perf_events+0x0/0x51c returned 0 after 0 usecs
[ 0.006991] calling init_real_mode+0x0/0x1b1 @ 1
[ 0.006997] initcall init_real_mode+0x0/0x1b1 returned 0 after 0 usecs
[ 0.006999] calling trace_init_perf_perm_irq_work_exit+0x0/0x13 @ 1
[ 0.007000] initcall trace_init_perf_perm_irq_work_exit+0x0/0x13 returned 0 after 0 usecs
[ 0.007002] calling register_nmi_cpu_backtrace_handler+0x0/0x16 @ 1
[ 0.007004] initcall register_nmi_cpu_backtrace_handler+0x0/0x16 returned 0 after 0 usecs
[ 0.007005] calling kvm_setup_vsyscall_timeinfo+0x0/0xfa @ 1
[ 0.007006] initcall kvm_setup_vsyscall_timeinfo+0x0/0xfa returned 0 after 0 usecs
[ 0.007007] calling spawn_ksoftirqd+0x0/0x39 @ 1
[ 0.007020] initcall spawn_ksoftirqd+0x0/0x39 returned 0 after 0 usecs
[ 0.007021] calling migration_init+0x0/0x34 @ 1
[ 0.007022] initcall migration_init+0x0/0x34 returned 0 after 0 usecs
[ 0.007023] calling srcu_bootup_announce+0x0/0x30 @ 1
[ 0.007023] rcu: Hierarchical SRCU implementation.
[ 0.007024] initcall srcu_bootup_announce+0x0/0x30 returned 0 after 0 usecs
[ 0.007025] calling rcu_spawn_core_kthreads+0x0/0x79 @ 1
[ 0.007026] initcall rcu_spawn_core_kthreads+0x0/0x79 returned 0 after 0 usecs
[ 0.007027] calling rcu_spawn_gp_kthread+0x0/0x117 @ 1
[ 0.007036] initcall rcu_spawn_gp_kthread+0x0/0x117 returned 0 after 0 usecs
[ 0.007037] calling check_cpu_stall_init+0x0/0x1b @ 1
[ 0.007038] initcall check_cpu_stall_init+0x0/0x1b returned 0 after 0 usecs
[ 0.007039] calling rcu_sysrq_init+0x0/0x22 @ 1
[ 0.007040] initcall rcu_sysrq_init+0x0/0x22 returned 0 after 0 usecs
[ 0.007041] calling cpu_stop_init+0x0/0x8a @ 1
[ 0.007052] initcall cpu_stop_init+0x0/0x8a returned 0 after 0 usecs
[ 0.007053] calling init_events+0x0/0x39 @ 1
[ 0.007061] initcall init_events+0x0/0x39 returned 0 after 0 usecs
[ 0.007062] calling init_trace_printk+0x0/0xc @ 1
[ 0.007064] initcall init_trace_printk+0x0/0xc returned 0 after 0 usecs
[ 0.007065] calling event_trace_enable_again+0x0/0x3e @ 1
[ 0.007067] initcall event_trace_enable_again+0x0/0x3e returned 0 after 0 usecs
[ 0.007068] calling jump_label_init_module+0x0/0x11 @ 1
[ 0.007069] initcall jump_label_init_module+0x0/0x11 returned 0 after 0 usecs
[ 0.007071] calling dynamic_debug_init+0x0/0x244 @ 1
[ 0.007302] initcall dynamic_debug_init+0x0/0x244 returned 0 after 0 usecs
[ 0.007303] calling efi_memreserve_root_init+0x0/0x26 @ 1
[ 0.007304] initcall efi_memreserve_root_init+0x0/0x26 returned 0 after 0 usecs
[ 0.007305] calling initialize_ptr_random+0x0/0x4b @ 1
[ 0.007310] initcall initialize_ptr_random+0x0/0x4b returned 0 after 0 usecs
[ 0.007512] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.007546] smp: Bringing up secondary CPUs ...
[ 0.007598] x86: Booting SMP configuration:
[ 0.007599] .... node #0, CPUs: #1 #2
[ 0.008003] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 0.008003] TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details.
[ 0.008003] #3
[ 0.008003] smp: Brought up 1 node, 4 CPUs
[ 0.008003] smpboot: Max logical packages: 1
[ 0.008003] smpboot: Total of 4 processors activated (20752.07 BogoMIPS)
[ 0.008326] devtmpfs: initialized
[ 0.008326] x86/mm: Memory block size: 128MB
[ 0.009242] calling bpf_jit_charge_init+0x0/0x35 @ 1
[ 0.009244] initcall bpf_jit_charge_init+0x0/0x35 returned 0 after 0 usecs
[ 0.009245] calling ipc_ns_init+0x0/0x40 @ 1
[ 0.009248] initcall ipc_ns_init+0x0/0x40 returned 0 after 0 usecs
[ 0.009249] calling init_mmap_min_addr+0x0/0x27 @ 1
[ 0.009250] initcall init_mmap_min_addr+0x0/0x27 returned 0 after 0 usecs
[ 0.009251] calling pci_realloc_setup_params+0x0/0x41 @ 1
[ 0.009253] initcall pci_realloc_setup_params+0x0/0x41 returned 0 after 0 usecs
[ 0.009254] calling net_ns_init+0x0/0x118 @ 1
[ 0.009264] initcall net_ns_init+0x0/0x118 returned 0 after 0 usecs
[ 0.009264] calling xen_pvh_gnttab_setup+0x0/0x34 @ 1
[ 0.009264] initcall xen_pvh_gnttab_setup+0x0/0x34 returned -19 after 0 usecs
[ 0.009264] calling e820__register_nvs_regions+0x0/0x38 @ 1
[ 0.009264] PM: Registering ACPI NVS region [mem 0xda96c000-0xdaddcfff] (4657152 bytes)
[ 0.009264] initcall e820__register_nvs_regions+0x0/0x38 returned 0 after 0 usecs
[ 0.009264] calling cpufreq_register_tsc_scaling+0x0/0x2a @ 1
[ 0.009264] initcall cpufreq_register_tsc_scaling+0x0/0x2a returned 0 after 0 usecs
[ 0.009264] calling reboot_init+0x0/0x3d @ 1
[ 0.009264] initcall reboot_init+0x0/0x3d returned 0 after 0 usecs
[ 0.009264] calling init_lapic_sysfs+0x0/0x21 @ 1
[ 0.009264] initcall init_lapic_sysfs+0x0/0x21 returned 0 after 0 usecs
[ 0.009264] calling alloc_frozen_cpus+0x0/0x8 @ 1
[ 0.009264] initcall alloc_frozen_cpus+0x0/0x8 returned 0 after 0 usecs
[ 0.009264] calling cpu_hotplug_pm_sync_init+0x0/0x14 @ 1
[ 0.009264] initcall cpu_hotplug_pm_sync_init+0x0/0x14 returned 0 after 0 usecs
[ 0.009264] calling wq_sysfs_init+0x0/0x2b @ 1
[ 0.009264] initcall wq_sysfs_init+0x0/0x2b returned 0 after 0 usecs
[ 0.009264] calling ksysfs_init+0x0/0x99 @ 1
[ 0.009264] initcall ksysfs_init+0x0/0x99 returned 0 after 0 usecs
[ 0.009264] calling pm_init+0x0/0x73 @ 1
[ 0.009264] initcall pm_init+0x0/0x73 returned 0 after 0 usecs
[ 0.009264] calling pm_disk_init+0x0/0x18 @ 1
[ 0.009264] initcall pm_disk_init+0x0/0x18 returned 0 after 0 usecs
[ 0.009264] calling swsusp_header_init+0x0/0x30 @ 1
[ 0.009264] initcall swsusp_header_init+0x0/0x30 returned 0 after 0 usecs
[ 0.009264] calling rcu_set_runtime_mode+0x0/0x12 @ 1
[ 0.009264] initcall rcu_set_runtime_mode+0x0/0x12 returned 0 after 0 usecs
[ 0.009264] calling init_jiffies_clocksource+0x0/0x18 @ 1
[ 0.009264] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.009264] initcall init_jiffies_clocksource+0x0/0x18 returned 0 after 0 usecs
[ 0.009264] calling futex_init+0x0/0x102 @ 1
[ 0.009264] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.009264] initcall futex_init+0x0/0x102 returned 0 after 0 usecs
[ 0.009264] calling cgroup_wq_init+0x0/0x29 @ 1
[ 0.009264] initcall cgroup_wq_init+0x0/0x29 returned 0 after 0 usecs
[ 0.009264] calling cgroup1_wq_init+0x0/0x29 @ 1
[ 0.009264] initcall cgroup1_wq_init+0x0/0x29 returned 0 after 0 usecs
[ 0.009264] calling ftrace_mod_cmd_init+0x0/0xc @ 1
[ 0.009264] initcall ftrace_mod_cmd_init+0x0/0xc returned 0 after 0 usecs
[ 0.009264] calling init_graph_trace+0x0/0x5d @ 1
[ 0.009264] initcall init_graph_trace+0x0/0x5d returned 0 after 0 usecs
[ 0.009264] calling init_zero_pfn+0x0/0x38 @ 1
[ 0.009264] initcall init_zero_pfn+0x0/0x38 returned 0 after 0 usecs
[ 0.009264] calling init_per_zone_wmark_min+0x0/0x71 @ 1
[ 0.009264] initcall init_per_zone_wmark_min+0x0/0x71 returned 0 after 0 usecs
[ 0.009264] calling memory_failure_init+0x0/0x97 @ 1
[ 0.009264] initcall memory_failure_init+0x0/0x97 returned 0 after 0 usecs
[ 0.009264] calling fsnotify_init+0x0/0x49 @ 1
[ 0.009264] initcall fsnotify_init+0x0/0x49 returned 0 after 0 usecs
[ 0.009264] calling filelock_init+0x0/0x98 @ 1
[ 0.009264] initcall filelock_init+0x0/0x98 returned 0 after 0 usecs
[ 0.009264] calling init_script_binfmt+0x0/0x16 @ 1
[ 0.009264] initcall init_script_binfmt+0x0/0x16 returned 0 after 0 usecs
[ 0.009264] calling init_elf_binfmt+0x0/0x16 @ 1
[ 0.009264] initcall init_elf_binfmt+0x0/0x16 returned 0 after 0 usecs
[ 0.009264] calling init_compat_elf_binfmt+0x0/0x16 @ 1
[ 0.009264] initcall init_compat_elf_binfmt+0x0/0x16 returned 0 after 0 usecs
[ 0.009264] calling debugfs_init+0x0/0x56 @ 1
[ 0.009264] initcall debugfs_init+0x0/0x56 returned 0 after 0 usecs
[ 0.009264] calling tracefs_init+0x0/0x3d @ 1
[ 0.009264] initcall tracefs_init+0x0/0x3d returned 0 after 0 usecs
[ 0.009264] calling securityfs_init+0x0/0x75 @ 1
[ 0.009264] initcall securityfs_init+0x0/0x75 returned 0 after 0 usecs
[ 0.009264] calling lockdown_secfs_init+0x0/0x30 @ 1
[ 0.009264] initcall lockdown_secfs_init+0x0/0x30 returned 0 after 0 usecs
[ 0.009264] calling prandom_init+0x0/0xd5 @ 1
[ 0.009264] initcall prandom_init+0x0/0xd5 returned 0 after 0 usecs
[ 0.009264] calling pinctrl_init+0x0/0xae @ 1
[ 0.009264] pinctrl core: initialized pinctrl subsystem
[ 0.009264] initcall pinctrl_init+0x0/0xae returned 0 after 0 usecs
[ 0.009264] calling gpiolib_dev_init+0x0/0xc9 @ 1
[ 0.009264] initcall gpiolib_dev_init+0x0/0xc9 returned 0 after 0 usecs
[ 0.009264] calling sfi_sysfs_init+0x0/0xcd @ 1
[ 0.009264] initcall sfi_sysfs_init+0x0/0xcd returned 0 after 0 usecs
[ 0.009264] calling regulator_init+0x0/0x9c @ 1
[ 0.009264] probe of reg-dummy returned 1 after 0 usecs
[ 0.009264] initcall regulator_init+0x0/0x9c returned 0 after 0 usecs
[ 0.009264] calling iommu_init+0x0/0x2b @ 1
[ 0.009264] initcall iommu_init+0x0/0x2b returned 0 after 0 usecs
[ 0.009264] calling component_debug_init+0x0/0x1d @ 1
[ 0.009264] initcall component_debug_init+0x0/0x1d returned 0 after 0 usecs
[ 0.009264] calling opp_debug_init+0x0/0x1d @ 1
[ 0.009264] initcall opp_debug_init+0x0/0x1d returned 0 after 0 usecs
[ 0.009264] calling cpufreq_core_init+0x0/0x40 @ 1
[ 0.009264] initcall cpufreq_core_init+0x0/0x40 returned 0 after 0 usecs
[ 0.009264] calling cpuidle_init+0x0/0x40 @ 1
[ 0.009264] initcall cpuidle_init+0x0/0x40 returned 0 after 0 usecs
[ 0.009264] calling capsule_reboot_register+0x0/0x11 @ 1
[ 0.009264] initcall capsule_reboot_register+0x0/0x11 returned 0 after 0 usecs
[ 0.009264] calling bsp_pm_check_init+0x0/0x14 @ 1
[ 0.009264] initcall bsp_pm_check_init+0x0/0x14 returned 0 after 0 usecs
[ 0.009264] calling sock_init+0x0/0x9f @ 1
[ 0.009264] initcall sock_init+0x0/0x9f returned 0 after 0 usecs
[ 0.009264] calling net_inuse_init+0x0/0x24 @ 1
[ 0.009264] initcall net_inuse_init+0x0/0x24 returned 0 after 0 usecs
[ 0.009264] calling net_defaults_init+0x0/0x24 @ 1
[ 0.009264] initcall net_defaults_init+0x0/0x24 returned 0 after 0 usecs
[ 0.009264] calling init_default_flow_dissectors+0x0/0x50 @ 1
[ 0.009264] initcall init_default_flow_dissectors+0x0/0x50 returned 0 after 0 usecs
[ 0.009264] calling netpoll_init+0x0/0x29 @ 1
[ 0.009264] initcall netpoll_init+0x0/0x29 returned 0 after 0 usecs
[ 0.009264] calling netlink_proto_init+0x0/0x159 @ 1
[ 0.009264] NET: Registered protocol family 16
[ 0.009264] initcall netlink_proto_init+0x0/0x159 returned 0 after 0 usecs
[ 0.009264] calling tcp_bpf_v4_build_proto+0x0/0x6c @ 1
[ 0.009264] initcall tcp_bpf_v4_build_proto+0x0/0x6c returned 0 after 0 usecs
[ 0.009264] calling __gnttab_init+0x0/0x30 @ 1
[ 0.009264] initcall __gnttab_init+0x0/0x30 returned -19 after 0 usecs
[ 0.009264] calling irq_sysfs_init+0x0/0x92 @ 1
[ 0.009264] initcall irq_sysfs_init+0x0/0x92 returned 0 after 0 usecs
[ 0.009264] calling audit_init+0x0/0x181 @ 1
[ 0.009264] audit: initializing netlink subsys (disabled)
[ 0.009264] initcall audit_init+0x0/0x181 returned 0 after 0 usecs
[ 0.009264] audit: type=2000 audit(1576836852.032:1): state=initialized audit_enabled=0 res=1
[ 0.009264] calling release_early_probes+0x0/0x33 @ 1
[ 0.009264] initcall release_early_probes+0x0/0x33 returned 0 after 0 usecs
[ 0.009264] calling bdi_class_init+0x0/0x49 @ 1
[ 0.009264] initcall bdi_class_init+0x0/0x49 returned 0 after 0 usecs
[ 0.009264] calling mm_sysfs_init+0x0/0x29 @ 1
[ 0.009264] initcall mm_sysfs_init+0x0/0x29 returned 0 after 0 usecs
[ 0.009264] calling gpiolib_sysfs_init+0x0/0xa1 @ 1
[ 0.009264] initcall gpiolib_sysfs_init+0x0/0xa1 returned 0 after 0 usecs
[ 0.009264] calling acpi_gpio_setup_params+0x0/0x30 @ 1
[ 0.009264] initcall acpi_gpio_setup_params+0x0/0x30 returned 0 after 0 usecs
[ 0.009264] calling pcibus_class_init+0x0/0x18 @ 1
[ 0.009264] initcall pcibus_class_init+0x0/0x18 returned 0 after 0 usecs
[ 0.009264] calling pci_driver_init+0x0/0x22 @ 1
[ 0.009264] initcall pci_driver_init+0x0/0x22 returned 0 after 0 usecs
[ 0.009264] calling backlight_class_init+0x0/0xa7 @ 1
[ 0.009264] initcall backlight_class_init+0x0/0xa7 returned 0 after 0 usecs
[ 0.009264] calling xenbus_init+0x0/0x29c @ 1
[ 0.009264] initcall xenbus_init+0x0/0x29c returned -19 after 0 usecs
[ 0.009264] calling tty_class_init+0x0/0x34 @ 1
[ 0.009264] initcall tty_class_init+0x0/0x34 returned 0 after 0 usecs
[ 0.009264] calling vtconsole_class_init+0x0/0xd4 @ 1
[ 0.009264] initcall vtconsole_class_init+0x0/0xd4 returned 0 after 0 usecs
[ 0.009264] calling serdev_init+0x0/0x1d @ 1
[ 0.009264] initcall serdev_init+0x0/0x1d returned 0 after 0 usecs
[ 0.009264] calling iommu_dev_init+0x0/0x18 @ 1
[ 0.009264] initcall iommu_dev_init+0x0/0x18 returned 0 after 0 usecs
[ 0.009264] calling mipi_dsi_bus_init+0x0/0x11 @ 1
[ 0.009264] initcall mipi_dsi_bus_init+0x0/0x11 returned 0 after 0 usecs
[ 0.009264] calling software_node_init+0x0/0x2b @ 1
[ 0.009264] initcall software_node_init+0x0/0x2b returned 0 after 0 usecs
[ 0.009264] calling wakeup_sources_debugfs_init+0x0/0x24 @ 1
[ 0.009264] initcall wakeup_sources_debugfs_init+0x0/0x24 returned 0 after 0 usecs
[ 0.009264] calling wakeup_sources_sysfs_init+0x0/0x30 @ 1
[ 0.009264] initcall wakeup_sources_sysfs_init+0x0/0x30 returned 0 after 0 usecs
[ 0.009264] calling register_node_type+0x0/0x33 @ 1
[ 0.009264] initcall register_node_type+0x0/0x33 returned 0 after 0 usecs
[ 0.009264] calling regmap_initcall+0x0/0xd @ 1
[ 0.009264] initcall regmap_initcall+0x0/0xd returned 0 after 0 usecs
[ 0.009264] calling spi_init+0x0/0xa1 @ 1
[ 0.009264] initcall spi_init+0x0/0xa1 returned 0 after 0 usecs
[ 0.009264] calling i2c_init+0x0/0xb4 @ 1
[ 0.009264] initcall i2c_init+0x0/0xb4 returned 0 after 0 usecs
[ 0.009264] calling init_ladder+0x0/0x24 @ 1
[ 0.009264] cpuidle: using governor ladder
[ 0.009264] initcall init_ladder+0x0/0x24 returned 0 after 0 usecs
[ 0.009264] calling init_menu+0x0/0x11 @ 1
[ 0.009264] cpuidle: using governor menu
[ 0.009264] initcall init_menu+0x0/0x11 returned 0 after 0 usecs
[ 0.009264] calling pcc_init+0x0/0x9b @ 1
[ 0.009264] Detected 1 PCC Subspaces
[ 0.009264] Registering PCC driver as Mailbox controller
[ 0.009264] probe of PCCT returned 1 after 0 usecs
[ 0.009264] initcall pcc_init+0x0/0x9b returned 0 after 0 usecs
[ 0.009264] calling amd_postcore_init+0x0/0x11b @ 1
[ 0.009264] initcall amd_postcore_init+0x0/0x11b returned 0 after 0 usecs
[ 0.009264] calling kobject_uevent_init+0x0/0xc @ 1
[ 0.009264] initcall kobject_uevent_init+0x0/0xc returned 0 after 0 usecs
[ 0.009264] calling bts_init+0x0/0xbb @ 1
[ 0.009264] initcall bts_init+0x0/0xbb returned -19 after 0 usecs
[ 0.009264] calling pt_init+0x0/0x39c @ 1
[ 0.009264] initcall pt_init+0x0/0x39c returned 0 after 0 usecs
[ 0.009264] calling boot_params_ksysfs_init+0x0/0x281 @ 1
[ 0.009264] initcall boot_params_ksysfs_init+0x0/0x281 returned 0 after 0 usecs
[ 0.009264] calling sbf_init+0x0/0xcf @ 1
[ 0.009264] initcall sbf_init+0x0/0xcf returned 0 after 0 usecs
[ 0.009264] calling arch_kdebugfs_init+0x0/0x1d @ 1
[ 0.009264] initcall arch_kdebugfs_init+0x0/0x1d returned 0 after 0 usecs
[ 0.009264] calling intel_pconfig_init+0x0/0xec @ 1
[ 0.009264] initcall intel_pconfig_init+0x0/0xec returned 0 after 0 usecs
[ 0.009264] calling mtrr_if_init+0x0/0x5e @ 1
[ 0.009264] initcall mtrr_if_init+0x0/0x5e returned 0 after 0 usecs
[ 0.009264] calling ffh_cstate_init+0x0/0x2a @ 1
[ 0.009264] initcall ffh_cstate_init+0x0/0x2a returned 0 after 0 usecs
[ 0.009264] calling activate_jump_labels+0x0/0x32 @ 1
[ 0.009264] initcall activate_jump_labels+0x0/0x32 returned 0 after 0 usecs
[ 0.009264] calling kvm_setup_pv_tlb_flush+0x0/0x77 @ 1
[ 0.009264] initcall kvm_setup_pv_tlb_flush+0x0/0x77 returned 0 after 0 usecs
[ 0.009264] calling gigantic_pages_init+0x0/0x2f @ 1
[ 0.009264] initcall gigantic_pages_init+0x0/0x2f returned 0 after 0 usecs
[ 0.009264] calling kcmp_cookies_init+0x0/0x38 @ 1
[ 0.009264] initcall kcmp_cookies_init+0x0/0x38 returned 0 after 0 usecs
[ 0.009264] calling cryptomgr_init+0x0/0x11 @ 1
[ 0.009264] initcall cryptomgr_init+0x0/0x11 returned 0 after 0 usecs
[ 0.009264] calling acpi_pci_init+0x0/0x62 @ 1
[ 0.009264] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.009264] ACPI: bus type PCI registered
[ 0.009264] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.009264] initcall acpi_pci_init+0x0/0x62 returned 0 after 0 usecs
[ 0.009264] calling dma_channel_table_init+0x0/0xcd @ 1
[ 0.009264] initcall dma_channel_table_init+0x0/0xcd returned 0 after 0 usecs
[ 0.009264] calling dma_bus_init+0x0/0xbf @ 1
[ 0.009264] initcall dma_bus_init+0x0/0xbf returned 0 after 0 usecs
[ 0.009264] calling setup_vcpu_hotplug_event+0x0/0x2b @ 1
[ 0.009264] initcall setup_vcpu_hotplug_event+0x0/0x2b returned -19 after 0 usecs
[ 0.009264] calling register_xen_pci_notifier+0x0/0x2d @ 1
[ 0.009264] initcall register_xen_pci_notifier+0x0/0x2d returned 0 after 0 usecs
[ 0.009264] calling xen_pcpu_init+0x0/0xb5 @ 1
[ 0.009264] initcall xen_pcpu_init+0x0/0xb5 returned -19 after 0 usecs
[ 0.009264] calling dmi_id_init+0x0/0x346 @ 1
[ 0.009264] initcall dmi_id_init+0x0/0x346 returned 0 after 0 usecs
[ 0.009264] calling pci_arch_init+0x0/0x66 @ 1
[ 0.009264] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.009264] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.009264] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
[ 0.009264] PCI: Using configuration type 1 for base access
[ 0.009264] initcall pci_arch_init+0x0/0x66 returned 0 after 0 usecs
[ 0.009264] calling init_vdso+0x0/0x20 @ 1
[ 0.009264] initcall init_vdso+0x0/0x20 returned 0 after 0 usecs
[ 0.009264] calling sysenter_setup+0x0/0x14 @ 1
[ 0.009264] initcall sysenter_setup+0x0/0x14 returned 0 after 0 usecs
[ 0.009264] calling fixup_ht_bug+0x0/0xc3 @ 1
[ 0.009264] initcall fixup_ht_bug+0x0/0xc3 returned 0 after 0 usecs
[ 0.009264] calling topology_init+0x0/0xbc @ 1
[ 0.009264] initcall topology_init+0x0/0xbc returned 0 after 0 usecs
[ 0.009264] calling intel_epb_init+0x0/0x6f @ 1
[ 0.009264] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.009264] initcall intel_epb_init+0x0/0x6f returned 0 after 0 usecs
[ 0.009264] calling mtrr_init_finialize+0x0/0x3f @ 1
[ 0.009264] initcall mtrr_init_finialize+0x0/0x3f returned 0 after 0 usecs
[ 0.009264] calling uid_cache_init+0x0/0x95 @ 1
[ 0.009264] initcall uid_cache_init+0x0/0x95 returned 0 after 0 usecs
[ 0.009264] calling param_sysfs_init+0x0/0x1e5 @ 1
[ 0.009264] initcall param_sysfs_init+0x0/0x1e5 returned 0 after 0 usecs
[ 0.009264] calling user_namespace_sysctl_init+0x0/0x3b @ 1
[ 0.009264] initcall user_namespace_sysctl_init+0x0/0x3b returned 0 after 0 usecs
[ 0.009264] calling proc_schedstat_init+0x0/0x25 @ 1
[ 0.009264] initcall proc_schedstat_init+0x0/0x25 returned 0 after 0 usecs
[ 0.009264] calling pm_sysrq_init+0x0/0x19 @ 1
[ 0.009264] initcall pm_sysrq_init+0x0/0x19 returned 0 after 0 usecs
[ 0.009264] calling create_proc_profile+0x0/0xe0 @ 1
[ 0.009264] initcall create_proc_profile+0x0/0xe0 returned 0 after 0 usecs
[ 0.009264] calling crash_save_vmcoreinfo_init+0x0/0x5f5 @ 1
[ 0.009264] initcall crash_save_vmcoreinfo_init+0x0/0x5f5 returned 0 after 0 usecs
[ 0.009264] calling crash_notes_memory_init+0x0/0x39 @ 1
[ 0.009264] initcall crash_notes_memory_init+0x0/0x39 returned 0 after 0 usecs
[ 0.009264] calling cgroup_sysfs_init+0x0/0x18 @ 1
[ 0.009264] initcall cgroup_sysfs_init+0x0/0x18 returned 0 after 0 usecs
[ 0.009264] calling cgroup_namespaces_init+0x0/0x8 @ 1
[ 0.009264] initcall cgroup_namespaces_init+0x0/0x8 returned 0 after 0 usecs
[ 0.009264] calling user_namespaces_init+0x0/0x2d @ 1
[ 0.009264] initcall user_namespaces_init+0x0/0x2d returned 0 after 0 usecs
[ 0.009264] calling init_kprobes+0x0/0x164 @ 1
[ 0.009264] initcall init_kprobes+0x0/0x164 returned 0 after 0 usecs
[ 0.009264] calling hung_task_init+0x0/0x5b @ 1
[ 0.009264] initcall hung_task_init+0x0/0x5b returned 0 after 0 usecs
[ 0.009264] calling send_signal_irq_work_init+0x0/0x44 @ 1
[ 0.009264] initcall send_signal_irq_work_init+0x0/0x44 returned 0 after 0 usecs
[ 0.009264] calling dev_map_init+0x0/0x14 @ 1
[ 0.009264] initcall dev_map_init+0x0/0x14 returned 0 after 0 usecs
[ 0.009264] calling stack_map_init+0x0/0x49 @ 1
[ 0.009264] initcall stack_map_init+0x0/0x49 returned 0 after 0 usecs
[ 0.009264] calling oom_init+0x0/0x3c @ 1
[ 0.009264] initcall oom_init+0x0/0x3c returned 0 after 0 usecs
[ 0.009264] calling default_bdi_init+0x0/0xaf @ 1
[ 0.009264] initcall default_bdi_init+0x0/0xaf returned 0 after 0 usecs
[ 0.009264] calling cgwb_init+0x0/0x29 @ 1
[ 0.009264] initcall cgwb_init+0x0/0x29 returned 0 after 0 usecs
[ 0.009264] calling percpu_enable_async+0x0/0xf @ 1
[ 0.009264] initcall percpu_enable_async+0x0/0xf returned 0 after 0 usecs
[ 0.009264] calling kcompactd_init+0x0/0x97 @ 1
[ 0.009264] initcall kcompactd_init+0x0/0x97 returned 0 after 0 usecs
[ 0.009264] calling init_user_reserve+0x0/0x40 @ 1
[ 0.009264] initcall init_user_reserve+0x0/0x40 returned 0 after 0 usecs
[ 0.009264] calling init_admin_reserve+0x0/0x40 @ 1
[ 0.009264] initcall init_admin_reserve+0x0/0x40 returned 0 after 0 usecs
[ 0.009264] calling init_reserve_notifier+0x0/0x1f @ 1
[ 0.009264] initcall init_reserve_notifier+0x0/0x1f returned 0 after 0 usecs
[ 0.009264] calling swap_init_sysfs+0x0/0x68 @ 1
[ 0.009264] initcall swap_init_sysfs+0x0/0x68 returned 0 after 0 usecs
[ 0.009264] calling swapfile_init+0x0/0x96 @ 1
[ 0.009264] initcall swapfile_init+0x0/0x96 returned 0 after 0 usecs
[ 0.009264] calling hugetlb_init+0x0/0x4ef @ 1
[ 0.009264] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.009264] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.009264] initcall hugetlb_init+0x0/0x4ef returned 0 after 0 usecs
[ 0.009264] calling ksm_init+0x0/0x19e @ 1
[ 0.009264] initcall ksm_init+0x0/0x19e returned 0 after 0 usecs
[ 0.009264] calling hugepage_init+0x0/0x162 @ 1
[ 0.009264] initcall hugepage_init+0x0/0x162 returned 0 after 0 usecs
[ 0.009264] calling mem_cgroup_init+0x0/0x13f @ 1
[ 0.009264] initcall mem_cgroup_init+0x0/0x13f returned 0 after 0 usecs
[ 0.009264] calling mem_cgroup_swap_init+0x0/0x52 @ 1
[ 0.009264] initcall mem_cgroup_swap_init+0x0/0x52 returned 0 after 0 usecs
[ 0.009264] calling sel_ib_pkey_init+0x0/0x32 @ 1
[ 0.009264] initcall sel_ib_pkey_init+0x0/0x32 returned 0 after 0 usecs
[ 0.009264] calling fips_init+0x0/0x1b @ 1
[ 0.009264] initcall fips_init+0x0/0x1b returned 0 after 0 usecs
[ 0.009264] calling dh_init+0x0/0x20 @ 1
[ 0.012011] alg: self-tests disabled
[ 0.012019] initcall dh_init+0x0/0x20 returned 0 after 3906 usecs
[ 0.012019] calling rsa_init+0x0/0x50 @ 1
[ 0.012021] initcall rsa_init+0x0/0x50 returned 0 after 0 usecs
[ 0.012021] calling hmac_module_init+0x0/0x11 @ 1
[ 0.012021] initcall hmac_module_init+0x0/0x11 returned 0 after 0 usecs
[ 0.012021] calling crypto_null_mod_init+0x0/0x6d @ 1
[ 0.012021] initcall crypto_null_mod_init+0x0/0x6d returned 0 after 0 usecs
[ 0.012021] calling md5_mod_init+0x0/0x11 @ 1
[ 0.012021] initcall md5_mod_init+0x0/0x11 returned 0 after 0 usecs
[ 0.012021] calling sha1_generic_mod_init+0x0/0x11 @ 1
[ 0.012021] initcall sha1_generic_mod_init+0x0/0x11 returned 0 after 0 usecs
[ 0.012021] calling sha256_generic_mod_init+0x0/0x16 @ 1
[ 0.012021] initcall sha256_generic_mod_init+0x0/0x16 returned 0 after 0 usecs
[ 0.012021] calling sha512_generic_mod_init+0x0/0x16 @ 1
[ 0.012021] initcall sha512_generic_mod_init+0x0/0x16 returned 0 after 0 usecs
[ 0.012021] calling crypto_ecb_module_init+0x0/0x11 @ 1
[ 0.012021] initcall crypto_ecb_module_init+0x0/0x11 returned 0 after 0 usecs
[ 0.012021] calling crypto_cbc_module_init+0x0/0x11 @ 1
[ 0.012021] initcall crypto_cbc_module_init+0x0/0x11 returned 0 after 0 usecs
[ 0.012021] calling crypto_cts_module_init+0x0/0x11 @ 1
[ 0.012021] initcall crypto_cts_module_init+0x0/0x11 returned 0 after 0 usecs
[ 0.012021] calling crypto_module_init+0x0/0x11 @ 1
[ 0.012021] initcall crypto_module_init+0x0/0x11 returned 0 after 0 usecs
[ 0.012021] calling aes_init+0x0/0x11 @ 1
[ 0.012021] initcall aes_init+0x0/0x11 returned 0 after 0 usecs
[ 0.012021] calling deflate_mod_init+0x0/0x44 @ 1
[ 0.012021] initcall deflate_mod_init+0x0/0x44 returned 0 after 0 usecs
[ 0.012021] calling crct10dif_mod_init+0x0/0x11 @ 1
[ 0.012021] initcall crct10dif_mod_init+0x0/0x11 returned 0 after 0 usecs
[ 0.012021] calling lzo_mod_init+0x0/0x3f @ 1
[ 0.012021] initcall lzo_mod_init+0x0/0x3f returned 0 after 0 usecs
[ 0.012021] calling lzorle_mod_init+0x0/0x3f @ 1
[ 0.012021] initcall lzorle_mod_init+0x0/0x3f returned 0 after 0 usecs
[ 0.012021] calling init_bio+0x0/0xcd @ 1
[ 0.012021] initcall init_bio+0x0/0xcd returned 0 after 0 usecs
[ 0.012021] calling blk_settings_init+0x0/0x2a @ 1
[ 0.012021] initcall blk_settings_init+0x0/0x2a returned 0 after 0 usecs
[ 0.012021] calling blk_ioc_init+0x0/0x2a @ 1
[ 0.012023] initcall blk_ioc_init+0x0/0x2a returned 0 after 0 usecs
[ 0.012024] calling blk_softirq_init+0x0/0x71 @ 1
[ 0.012025] initcall blk_softirq_init+0x0/0x71 returned 0 after 0 usecs
[ 0.012025] calling blk_mq_init+0x0/0x2a @ 1
[ 0.012026] initcall blk_mq_init+0x0/0x2a returned 0 after 0 usecs
[ 0.012027] calling genhd_device_init+0x0/0x7a @ 1
[ 0.012037] initcall genhd_device_init+0x0/0x7a returned 0 after 0 usecs
[ 0.012037] calling blkcg_init+0x0/0x29 @ 1
[ 0.012037] initcall blkcg_init+0x0/0x29 returned 0 after 0 usecs
[ 0.012037] calling irq_poll_setup+0x0/0x6c @ 1
[ 0.012037] initcall irq_poll_setup+0x0/0x6c returned 0 after 0 usecs
[ 0.012037] calling byt_gpio_init+0x0/0x13 @ 1
[ 0.012037] initcall byt_gpio_init+0x0/0x13 returned 0 after 0 usecs
[ 0.012037] calling chv_pinctrl_init+0x0/0x13 @ 1
[ 0.012037] initcall chv_pinctrl_init+0x0/0x13 returned 0 after 0 usecs
[ 0.012037] calling bxt_pinctrl_init+0x0/0x13 @ 1
[ 0.012042] initcall bxt_pinctrl_init+0x0/0x13 returned 0 after 0 usecs
[ 0.012042] calling cdf_pinctrl_init+0x0/0x13 @ 1
[ 0.012045] initcall cdf_pinctrl_init+0x0/0x13 returned 0 after 0 usecs
[ 0.012046] calling dnv_pinctrl_init+0x0/0x13 @ 1
[ 0.012049] initcall dnv_pinctrl_init+0x0/0x13 returned 0 after 0 usecs
[ 0.012049] calling glk_pinctrl_init+0x0/0x13 @ 1
[ 0.012052] initcall glk_pinctrl_init+0x0/0x13 returned 0 after 0 usecs
[ 0.012053] calling spt_pinctrl_init+0x0/0x13 @ 1
[ 0.012056] initcall spt_pinctrl_init+0x0/0x13 returned 0 after 0 usecs
[ 0.012057] calling gpiolib_debugfs_init+0x0/0x24 @ 1
[ 0.012065] initcall gpiolib_debugfs_init+0x0/0x24 returned 0 after 0 usecs
[ 0.012066] calling pwm_debugfs_init+0x0/0x24 @ 1
[ 0.012067] initcall pwm_debugfs_init+0x0/0x24 returned 0 after 0 usecs
[ 0.012068] calling pwm_sysfs_init+0x0/0x18 @ 1
[ 0.012072] initcall pwm_sysfs_init+0x0/0x18 returned 0 after 0 usecs
[ 0.012073] calling pci_slot_init+0x0/0x40 @ 1
[ 0.012075] initcall pci_slot_init+0x0/0x40 returned 0 after 0 usecs
[ 0.012076] calling fbmem_init+0x0/0xe2 @ 1
[ 0.012090] initcall fbmem_init+0x0/0xe2 returned 0 after 0 usecs
[ 0.012091] calling scan_for_dmi_ipmi+0x0/0x26c @ 1
[ 0.012093] initcall scan_for_dmi_ipmi+0x0/0x26c returned 0 after 0 usecs
[ 0.012094] calling acpi_init+0x0/0x329 @ 1
[ 0.012110] ACPI: Added _OSI(Module Device)
[ 0.012111] ACPI: Added _OSI(Processor Device)
[ 0.012111] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.012112] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.012113] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.012113] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.012114] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.028665] ACPI: 11 ACPI AML tables successfully acquired and loaded
[ 0.031416] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.036467] ACPI: Dynamic OEM Table Load:
[ 0.036472] ACPI: SSDT 0xFFFF9DFD4B09D800 0003D3 (v02 PmRef Cpu0Cst 00003001 INTL 20120913)
[ 0.037316] ACPI: Dynamic OEM Table Load:
[ 0.037320] ACPI: SSDT 0xFFFF9DFD4B2EA800 0005AA (v02 PmRef ApIst 00003000 INTL 20120913)
[ 0.038192] ACPI: Dynamic OEM Table Load:
[ 0.038195] ACPI: SSDT 0xFFFF9DFD4B0F2400 000119 (v02 PmRef ApCst 00003000 INTL 20120913)
[ 0.039678] ACPI: EC: EC started
[ 0.039678] ACPI: EC: interrupt blocked
[ 0.041213] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as first EC
[ 0.041214] ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x27, EC_CMD/EC_SC=0x934, EC_DATA=0x930
[ 0.041215] ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC used to handle transactions
[ 0.041215] ACPI: Interpreter enabled
[ 0.041239] ACPI: (supports S0 S3 S4 S5)
[ 0.041240] ACPI: Using IOAPIC for interrupt routing
[ 0.041264] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.041731] ACPI: Enabled 6 GPEs in block 00 to 7F
[ 0.043188] ACPI: Power Resource [PG00] (on)
[ 0.043504] ACPI: Power Resource [PG01] (on)
[ 0.043797] ACPI: Power Resource [PG02] (on)
[ 0.057435] ACPI: Power Resource [FN00] (off)
[ 0.057485] ACPI: Power Resource [FN01] (off)
[ 0.057533] ACPI: Power Resource [FN02] (off)
[ 0.057580] ACPI: Power Resource [FN03] (off)
[ 0.057625] ACPI: Power Resource [FN04] (off)
[ 0.058193] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.058197] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.058675] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[ 0.058675] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.058984] PCI host bridge to bus 0000:00
[ 0.058985] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.058986] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.058987] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.058988] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.058988] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.058989] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.058990] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.058990] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.058991] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.058992] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.058992] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.058993] pci_bus 0000:00: root bus resource [mem 0xdf800000-0xfeafffff window]
[ 0.058994] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.059001] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000
[ 0.059007] pci 0000:00:00.0: calling quirk_mmio_always_on+0x0/0x10 @ 1
[ 0.059009] pci 0000:00:00.0: quirk_mmio_always_on+0x0/0x10 took 0 usecs
[ 0.059085] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000
[ 0.059094] pci 0000:00:02.0: reg 0x10: [mem 0xf6000000-0xf6ffffff 64bit]
[ 0.059098] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.059101] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.059113] pci 0000:00:02.0: calling efifb_fixup_resources+0x0/0xf0 @ 1
[ 0.059114] pci 0000:00:02.0: BAR 2: assigned to efifb
[ 0.059116] pci 0000:00:02.0: efifb_fixup_resources+0x0/0xf0 took 0 usecs
[ 0.059118] pci 0000:00:02.0: calling quirk_iommu_igfx+0x0/0x23 @ 1
[ 0.059119] pci 0000:00:02.0: DMAR: Disabling IOMMU for graphics on this chipset
[ 0.059120] pci 0000:00:02.0: quirk_iommu_igfx+0x0/0x23 took 0 usecs
[ 0.059187] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300
[ 0.059194] pci 0000:00:03.0: reg 0x10: [mem 0xf723c000-0xf723ffff 64bit]
[ 0.059270] pci 0000:00:04.0: [8086:1603] type 00 class 0x118000
[ 0.059279] pci 0000:00:04.0: reg 0x10: [mem 0xf7230000-0xf7237fff 64bit]
[ 0.059371] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330
[ 0.059386] pci 0000:00:14.0: reg 0x10: [mem 0xf7220000-0xf722ffff 64bit]
[ 0.059433] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.059497] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000
[ 0.059515] pci 0000:00:16.0: reg 0x10: [mem 0xf7246000-0xf724601f 64bit]
[ 0.059572] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.059654] pci 0000:00:19.0: [8086:15a2] type 00 class 0x020000
[ 0.059659] pci 0000:00:19.0: calling quirk_f0_vpd_link+0x0/0x60 @ 1
[ 0.059661] pci 0000:00:19.0: quirk_f0_vpd_link+0x0/0x60 took 0 usecs
[ 0.059669] pci 0000:00:19.0: reg 0x10: [mem 0xf7200000-0xf721ffff]
[ 0.059674] pci 0000:00:19.0: reg 0x14: [mem 0xf7243000-0xf7243fff]
[ 0.059678] pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f]
[ 0.059717] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.059782] pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300
[ 0.059796] pci 0000:00:1b.0: reg 0x10: [mem 0xf7238000-0xf723bfff 64bit]
[ 0.059835] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.059913] pci 0000:00:1c.0: [8086:9c90] type 01 class 0x060400
[ 0.059919] pci 0000:00:1c.0: calling quirk_cmd_compl+0x0/0x70 @ 1
[ 0.059921] pci 0000:00:1c.0: quirk_cmd_compl+0x0/0x70 took 0 usecs
[ 0.059923] pci 0000:00:1c.0: calling quirk_no_aersid+0x0/0x30 @ 1
[ 0.059925] pci 0000:00:1c.0: quirk_no_aersid+0x0/0x30 took 0 usecs
[ 0.059971] pci 0000:00:1c.0: calling pci_fixup_transparent_bridge+0x0/0x20 @ 1
[ 0.059972] pci 0000:00:1c.0: pci_fixup_transparent_bridge+0x0/0x20 took 0 usecs
[ 0.060011] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.060028] pci 0000:00:1c.0: Enabling MPC IRBNCE
[ 0.060030] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled
[ 0.060134] pci 0000:00:1c.3: [8086:9c96] type 01 class 0x060400
[ 0.060140] pci 0000:00:1c.3: calling quirk_cmd_compl+0x0/0x70 @ 1
[ 0.060142] pci 0000:00:1c.3: quirk_cmd_compl+0x0/0x70 took 0 usecs
[ 0.060143] pci 0000:00:1c.3: calling quirk_no_aersid+0x0/0x30 @ 1
[ 0.060145] pci 0000:00:1c.3: quirk_no_aersid+0x0/0x30 took 0 usecs
[ 0.060190] pci 0000:00:1c.3: calling pci_fixup_transparent_bridge+0x0/0x20 @ 1
[ 0.060192] pci 0000:00:1c.3: pci_fixup_transparent_bridge+0x0/0x20 took 0 usecs
[ 0.060227] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.060242] pci 0000:00:1c.3: Enabling MPC IRBNCE
[ 0.060243] pci 0000:00:1c.3: Intel PCH root port ACS workaround enabled
[ 0.060344] pci 0000:00:1d.0: [8086:9ca6] type 00 class 0x0c0320
[ 0.060362] pci 0000:00:1d.0: reg 0x10: [mem 0xf7242000-0xf72423ff]
[ 0.060433] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.060503] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100
[ 0.060665] pci 0000:00:1f.2: [8086:282a] type 00 class 0x010400
[ 0.060677] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7]
[ 0.060682] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3]
[ 0.060687] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7]
[ 0.060692] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3]
[ 0.060697] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.060703] pci 0000:00:1f.2: reg 0x24: [mem 0xf7241000-0xf72417ff]
[ 0.060729] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.060789] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500
[ 0.060804] pci 0000:00:1f.3: reg 0x10: [mem 0xf7240000-0xf72400ff 64bit]
[ 0.060819] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.062743] pci 0000:01:00.0: [1217:8520] type 00 class 0x080501
[ 0.062776] pci 0000:01:00.0: reg 0x10: [mem 0xf7101000-0xf7101fff]
[ 0.062788] pci 0000:01:00.0: reg 0x14: [mem 0xf7100000-0xf71007ff]
[ 0.062941] pci 0000:01:00.0: PME# supported from D3hot D3cold
[ 0.073839] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.073844] pci 0000:00:1c.0: bridge window [mem 0xf7100000-0xf71fffff]
[ 0.074109] pci 0000:02:00.0: [8086:095a] type 00 class 0x028000
[ 0.074204] pci 0000:02:00.0: reg 0x10: [mem 0xf7000000-0xf7001fff 64bit]
[ 0.074424] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.074883] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 0.074887] pci 0000:00:1c.3: bridge window [mem 0xf7000000-0xf70fffff]
[ 0.076273] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.076312] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.076350] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.076387] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.076424] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.076459] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.076495] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.076531] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.077676] ACPI: EC: interrupt unblocked
[ 0.077686] ACPI: EC: event unblocked
[ 0.077702] ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x27, EC_CMD/EC_SC=0x934, EC_DATA=0x930
[ 0.077703] ACPI: \_SB_.PCI0.LPCB.ECDV: Boot DSDT EC used to handle transactions and events
[ 0.077707] probe of PNP0C09:00 returned 1 after 0 usecs
[ 0.077753] initcall acpi_init+0x0/0x329 returned 0 after 62500 usecs
[ 0.077755] calling adxl_init+0x0/0x18f @ 1
[ 0.077758] initcall adxl_init+0x0/0x18f returned -19 after 0 usecs
[ 0.077760] calling pnp_init+0x0/0x11 @ 1
[ 0.077765] initcall pnp_init+0x0/0x11 returned 0 after 0 usecs
[ 0.077766] calling balloon_init+0x0/0x19e @ 1
[ 0.077768] initcall balloon_init+0x0/0x19e returned -19 after 0 usecs
[ 0.077770] calling xen_setup_shutdown_event+0x0/0x30 @ 1
[ 0.077772] initcall xen_setup_shutdown_event+0x0/0x30 returned -19 after 0 usecs
[ 0.077773] calling xenbus_probe_backend_init+0x0/0x52 @ 1
[ 0.077777] initcall xenbus_probe_backend_init+0x0/0x52 returned 0 after 0 usecs
[ 0.077778] calling xenbus_probe_frontend_init+0x0/0x52 @ 1
[ 0.077781] initcall xenbus_probe_frontend_init+0x0/0x52 returned 0 after 0 usecs
[ 0.077782] calling xen_acpi_pad_init+0x0/0x3c @ 1
[ 0.077783] initcall xen_acpi_pad_init+0x0/0x3c returned -19 after 0 usecs
[ 0.077784] calling misc_init+0x0/0xc5 @ 1
[ 0.077789] initcall misc_init+0x0/0xc5 returned 0 after 0 usecs
[ 0.077790] calling iommu_subsys_init+0x0/0x4f @ 1
[ 0.077790] iommu: Default domain type: Translated
[ 0.077791] initcall iommu_subsys_init+0x0/0x4f returned 0 after 0 usecs
[ 0.077792] calling vga_arb_device_init+0x0/0x264 @ 1
[ 0.077804] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.077804] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.077804] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.077804] vgaarb: loaded
[ 0.077804] initcall vga_arb_device_init+0x0/0x264 returned 0 after 0 usecs
[ 0.077804] calling cn_init+0x0/0xe0 @ 1
[ 0.077804] initcall cn_init+0x0/0xe0 returned 0 after 0 usecs
[ 0.077804] calling dax_core_init+0x0/0xc4 @ 1
[ 0.077804] initcall dax_core_init+0x0/0xc4 returned 0 after 0 usecs
[ 0.077804] calling dma_buf_init+0x0/0xca @ 1
[ 0.077804] initcall dma_buf_init+0x0/0xca returned 0 after 0 usecs
[ 0.077804] calling serio_init+0x0/0x2e @ 1
[ 0.077804] initcall serio_init+0x0/0x2e returned 0 after 0 usecs
[ 0.077804] calling input_init+0x0/0x104 @ 1
[ 0.077804] initcall input_init+0x0/0x104 returned 0 after 0 usecs
[ 0.077804] calling rtc_init+0x0/0x4c @ 1
[ 0.077804] initcall rtc_init+0x0/0x4c returned 0 after 0 usecs
[ 0.077804] calling cec_devnode_init+0x0/0xaa @ 1
[ 0.077804] initcall cec_devnode_init+0x0/0xaa returned 0 after 0 usecs
[ 0.077804] calling power_supply_class_init+0x0/0x40 @ 1
[ 0.077804] initcall power_supply_class_init+0x0/0x40 returned 0 after 0 usecs
[ 0.077804] calling hwmon_init+0x0/0xff @ 1
[ 0.077804] initcall hwmon_init+0x0/0xff returned 0 after 0 usecs
[ 0.077804] calling edac_init+0x0/0x76 @ 1
[ 0.077804] EDAC MC: Ver: 3.0.0
[ 0.080021] initcall edac_init+0x0/0x76 returned 0 after 3906 usecs
[ 0.080021] calling leds_init+0x0/0x3c @ 1
[ 0.080021] initcall leds_init+0x0/0x3c returned 0 after 0 usecs
[ 0.080021] calling dmi_init+0x0/0x11c @ 1
[ 0.080022] initcall dmi_init+0x0/0x11c returned 0 after 0 usecs
[ 0.080023] calling efisubsys_init+0x0/0x31f @ 1
[ 0.080028] Registered efivars operations
[ 0.080055] initcall efisubsys_init+0x0/0x31f returned 0 after 0 usecs
[ 0.080056] calling devfreq_init+0x0/0xa3 @ 1
[ 0.080061] initcall devfreq_init+0x0/0xa3 returned 0 after 0 usecs
[ 0.080061] calling ras_init+0x0/0xf @ 1
[ 0.080061] initcall ras_init+0x0/0xf returned 0 after 0 usecs
[ 0.080061] calling nvmem_init+0x0/0x11 @ 1
[ 0.080061] initcall nvmem_init+0x0/0x11 returned 0 after 0 usecs
[ 0.080061] calling pci_subsys_init+0x0/0x63 @ 1
[ 0.080061] PCI: Using ACPI for IRQ routing
[ 0.081589] PCI: pci_cache_line_size set to 64 bytes
[ 0.084148] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.084150] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.084150] e820: reserve RAM buffer [mem 0xbf4b8000-0xbfffffff]
[ 0.084151] e820: reserve RAM buffer [mem 0xd9d9b000-0xdbffffff]
[ 0.084152] e820: reserve RAM buffer [mem 0xda96c000-0xdbffffff]
[ 0.084152] e820: reserve RAM buffer [mem 0xdbb00000-0xdbffffff]
[ 0.084153] e820: reserve RAM buffer [mem 0x41e800000-0x41fffffff]
[ 0.084155] initcall pci_subsys_init+0x0/0x63 returned 0 after 3906 usecs
[ 0.084156] calling proto_init+0x0/0x11 @ 1
[ 0.084161] initcall proto_init+0x0/0x11 returned 0 after 0 usecs
[ 0.084162] calling net_dev_init+0x0/0x22b @ 1
[ 0.084219] initcall net_dev_init+0x0/0x22b returned 0 after 0 usecs
[ 0.084220] calling neigh_init+0x0/0x85 @ 1
[ 0.084222] initcall neigh_init+0x0/0x85 returned 0 after 0 usecs
[ 0.084223] calling fib_notifier_init+0x0/0x11 @ 1
[ 0.084225] initcall fib_notifier_init+0x0/0x11 returned 0 after 0 usecs
[ 0.084226] calling init_flow_indr_rhashtable+0x0/0x18 @ 1
[ 0.084228] initcall init_flow_indr_rhashtable+0x0/0x18 returned 0 after 0 usecs
[ 0.084229] calling fib_rules_init+0x0/0xb2 @ 1
[ 0.084231] initcall fib_rules_init+0x0/0xb2 returned 0 after 0 usecs
[ 0.084232] calling init_cgroup_netprio+0x0/0x14 @ 1
[ 0.084234] initcall init_cgroup_netprio+0x0/0x14 returned 0 after 0 usecs
[ 0.084235] calling bpf_lwt_init+0x0/0x16 @ 1
[ 0.084236] initcall bpf_lwt_init+0x0/0x16 returned 0 after 0 usecs
[ 0.084237] calling devlink_init+0x0/0x11 @ 1
[ 0.084243] initcall devlink_init+0x0/0x11 returned 0 after 0 usecs
[ 0.084244] calling pktsched_init+0x0/0x113 @ 1
[ 0.084247] initcall pktsched_init+0x0/0x113 returned 0 after 0 usecs
[ 0.084249] calling tc_filter_init+0x0/0x10c @ 1
[ 0.084253] initcall tc_filter_init+0x0/0x10c returned 0 after 0 usecs
[ 0.084254] calling tc_action_init+0x0/0x55 @ 1
[ 0.084256] initcall tc_action_init+0x0/0x55 returned 0 after 0 usecs
[ 0.084257] calling genl_init+0x0/0x38 @ 1
[ 0.084264] initcall genl_init+0x0/0x38 returned 0 after 0 usecs
[ 0.084266] calling nexthop_init+0x0/0xd9 @ 1
[ 0.084268] initcall nexthop_init+0x0/0xd9 returned 0 after 0 usecs
[ 0.084269] calling wireless_nlevent_init+0x0/0x3f @ 1
[ 0.084271] initcall wireless_nlevent_init+0x0/0x3f returned 0 after 0 usecs
[ 0.084358] calling nmi_warning_debugfs+0x0/0x27 @ 1
[ 0.084362] initcall nmi_warning_debugfs+0x0/0x27 returned 0 after 0 usecs
[ 0.084363] calling save_microcode_in_initrd+0x0/0x9d @ 1
[ 0.084372] initcall save_microcode_in_initrd+0x0/0x9d returned 0 after 0 usecs
[ 0.084374] calling hpet_late_init+0x0/0x21b @ 1
[ 0.084377] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.084380] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.086383] initcall hpet_late_init+0x0/0x21b returned 0 after 0 usecs
[ 0.086384] calling init_amd_nbs+0x0/0x127 @ 1
[ 0.086389] initcall init_amd_nbs+0x0/0x127 returned 0 after 0 usecs
[ 0.086390] calling sugov_register+0x0/0x11 @ 1
[ 0.086391] initcall sugov_register+0x0/0x11 returned 0 after 0 usecs
[ 0.086392] calling clocksource_done_booting+0x0/0x42 @ 1
[ 0.086402] clocksource: Switched to clocksource tsc-early
[ 0.086404] initcall clocksource_done_booting+0x0/0x42 returned 0 after 3 usecs
[ 0.086405] calling tracer_init_tracefs+0x0/0x1b8 @ 1
[ 0.089609] initcall tracer_init_tracefs+0x0/0x1b8 returned 0 after 7364 usecs
[ 0.089609] calling init_trace_printk_function_export+0x0/0x2d @ 1
[ 0.089609] initcall init_trace_printk_function_export+0x0/0x2d returned 0 after 0 usecs
[ 0.089609] calling init_graph_tracefs+0x0/0x2d @ 1
[ 0.089609] initcall init_graph_tracefs+0x0/0x2d returned 0 after 2 usecs
[ 0.089609] calling bpf_event_init+0x0/0xf @ 1
[ 0.089609] initcall bpf_event_init+0x0/0xf returned 0 after 0 usecs
[ 0.089609] calling init_kprobe_trace+0x0/0x1ca @ 1
[ 0.089609] initcall init_kprobe_trace+0x0/0x1ca returned 0 after 1 usecs
[ 0.089609] calling init_dynamic_event+0x0/0x3e @ 1
[ 0.089609] initcall init_dynamic_event+0x0/0x3e returned 0 after 0 usecs
[ 0.089609] calling init_uprobe_trace+0x0/0x69 @ 1
[ 0.089609] initcall init_uprobe_trace+0x0/0x69 returned 0 after 1 usecs
[ 0.089609] calling bpf_init+0x0/0x4d @ 1
[ 0.089609] initcall bpf_init+0x0/0x4d returned 0 after 3 usecs
[ 0.089609] calling init_pipe_fs+0x0/0x4a @ 1
[ 0.089609] initcall init_pipe_fs+0x0/0x4a returned 0 after 10 usecs
[ 0.089609] calling cgroup_writeback_init+0x0/0x26 @ 1
[ 0.089609] initcall cgroup_writeback_init+0x0/0x26 returned 0 after 11 usecs
[ 0.089609] calling inotify_user_setup+0x0/0x48 @ 1
[ 0.089609] initcall inotify_user_setup+0x0/0x48 returned 0 after 5 usecs
[ 0.089609] calling eventpoll_init+0x0/0xca @ 1
[ 0.089609] initcall eventpoll_init+0x0/0xca returned 0 after 6 usecs
[ 0.089609] calling anon_inode_init+0x0/0x59 @ 1
[ 0.089609] initcall anon_inode_init+0x0/0x59 returned 0 after 4 usecs
[ 0.089609] calling init_dax_wait_table+0x0/0x34 @ 1
[ 0.089609] initcall init_dax_wait_table+0x0/0x34 returned 0 after 16 usecs
[ 0.089609] calling proc_locks_init+0x0/0x28 @ 1
[ 0.089609] initcall proc_locks_init+0x0/0x28 returned 0 after 1 usecs
[ 0.089609] calling dquot_init+0x0/0x111 @ 1
[ 0.089609] VFS: Disk quotas dquot_6.6.0
[ 0.089609] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.089609] initcall dquot_init+0x0/0x111 returned 0 after 13 usecs
[ 0.089609] calling quota_init+0x0/0x24 @ 1
[ 0.089609] initcall quota_init+0x0/0x24 returned 0 after 5 usecs
[ 0.089609] calling proc_cmdline_init+0x0/0x22 @ 1
[ 0.089609] initcall proc_cmdline_init+0x0/0x22 returned 0 after 0 usecs
[ 0.089609] calling proc_consoles_init+0x0/0x25 @ 1
[ 0.089609] initcall proc_consoles_init+0x0/0x25 returned 0 after 0 usecs
[ 0.089609] calling proc_cpuinfo_init+0x0/0x1f @ 1
[ 0.089609] initcall proc_cpuinfo_init+0x0/0x1f returned 0 after 0 usecs
[ 0.089609] calling proc_devices_init+0x0/0x25 @ 1
[ 0.089609] initcall proc_devices_init+0x0/0x25 returned 0 after 0 usecs
[ 0.089609] calling proc_interrupts_init+0x0/0x25 @ 1
[ 0.089609] initcall proc_interrupts_init+0x0/0x25 returned 0 after 0 usecs
[ 0.089609] calling proc_loadavg_init+0x0/0x22 @ 1
[ 0.089609] initcall proc_loadavg_init+0x0/0x22 returned 0 after 0 usecs
[ 0.089609] calling proc_meminfo_init+0x0/0x22 @ 1
[ 0.089609] initcall proc_meminfo_init+0x0/0x22 returned 0 after 0 usecs
[ 0.089609] calling proc_stat_init+0x0/0x1f @ 1
[ 0.089609] initcall proc_stat_init+0x0/0x1f returned 0 after 0 usecs
[ 0.089609] calling proc_uptime_init+0x0/0x22 @ 1
[ 0.089609] initcall proc_uptime_init+0x0/0x22 returned 0 after 0 usecs
[ 0.089609] calling proc_version_init+0x0/0x22 @ 1
[ 0.089609] initcall proc_version_init+0x0/0x22 returned 0 after 0 usecs
[ 0.089609] calling proc_softirqs_init+0x0/0x22 @ 1
[ 0.089609] initcall proc_softirqs_init+0x0/0x22 returned 0 after 0 usecs
[ 0.089609] calling proc_kcore_init+0x0/0xd0 @ 1
[ 0.089609] initcall proc_kcore_init+0x0/0xd0 returned 0 after 4 usecs
[ 0.089609] calling vmcore_init+0x0/0x16d @ 1
[ 0.089609] initcall vmcore_init+0x0/0x16d returned 0 after 0 usecs
[ 0.089609] calling proc_kmsg_init+0x0/0x22 @ 1
[ 0.089609] initcall proc_kmsg_init+0x0/0x22 returned 0 after 0 usecs
[ 0.089609] calling proc_page_init+0x0/0x56 @ 1
[ 0.089609] initcall proc_page_init+0x0/0x56 returned 0 after 1 usecs
[ 0.089609] calling init_ramfs_fs+0x0/0x11 @ 1
[ 0.089609] initcall init_ramfs_fs+0x0/0x11 returned 0 after 1 usecs
[ 0.089609] calling init_hugetlbfs_fs+0x0/0x13e @ 1
[ 0.089609] initcall init_hugetlbfs_fs+0x0/0x13e returned 0 after 11 usecs
[ 0.089609] calling tomoyo_initerface_init+0x0/0x17d @ 1
[ 0.089609] initcall tomoyo_initerface_init+0x0/0x17d returned 0 after 12 usecs
[ 0.089609] calling aa_create_aafs+0x0/0x3ac @ 1
[ 0.089609] AppArmor: AppArmor Filesystem Enabled
[ 0.089609] initcall aa_create_aafs+0x0/0x3ac returned 0 after 46 usecs
[ 0.089609] calling blk_scsi_ioctl_init+0x0/0x399 @ 1
[ 0.089609] initcall blk_scsi_ioctl_init+0x0/0x399 returned 0 after 0 usecs
[ 0.089609] calling dynamic_debug_init_debugfs+0x0/0x3c @ 1
[ 0.089609] initcall dynamic_debug_init_debugfs+0x0/0x3c returned 0 after 2 usecs
[ 0.089609] calling acpi_event_init+0x0/0x2d @ 1
[ 0.089609] initcall acpi_event_init+0x0/0x2d returned 0 after 3 usecs
[ 0.089609] calling pnp_system_init+0x0/0x11 @ 1
[ 0.089609] initcall pnp_system_init+0x0/0x11 returned 0 after 7 usecs
[ 0.089609] calling pnpacpi_init+0x0/0x6a @ 1
[ 0.089609] pnp: PnP ACPI init
[ 0.092043] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.092045] system 00:00: [io 0xffff] has been reserved
[ 0.092046] system 00:00: [io 0xffff] has been reserved
[ 0.092047] system 00:00: [io 0xffff] has been reserved
[ 0.092048] system 00:00: [io 0x1800-0x18fe] has been reserved
[ 0.092049] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.092051] probe of 00:00 returned 1 after 13 usecs
[ 0.092053] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.092092] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.092124] system 00:02: [io 0x1854-0x1857] has been reserved
[ 0.092125] probe of 00:02 returned 1 after 3 usecs
[ 0.092126] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.092202] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.092214] pnp 00:04: Plug and Play ACPI device, IDs DLL062d PNP0f13 (active)
[ 0.092794] pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (disabled)
[ 0.092903] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.092904] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.092905] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.092906] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.092907] system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.092908] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.092909] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.092910] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.092911] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[ 0.092912] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.092913] system 00:06: [mem 0xf7fe0000-0xf7feffff] has been reserved
[ 0.092914] system 00:06: [mem 0xf7ff0000-0xf7ffffff] has been reserved
[ 0.092915] probe of 00:06 returned 1 after 16 usecs
[ 0.092917] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.093205] probe of 00:07 returned 1 after 1 usecs
[ 0.093206] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.095545] pnp 00:08: Plug and Play ACPI device, IDs PNP0c31 (active)
[ 0.095583] pnp: PnP ACPI: found 9 devices
[ 0.095586] initcall pnpacpi_init+0x0/0x6a returned 0 after 3666 usecs
[ 0.095588] calling chr_dev_init+0x0/0xa7 @ 1
[ 0.096585] initcall chr_dev_init+0x0/0xa7 returned 0 after 971 usecs
[ 0.096587] calling firmware_class_init+0x0/0xfa @ 1
[ 0.096592] initcall firmware_class_init+0x0/0xfa returned 0 after 3 usecs
[ 0.096594] calling thermal_init+0x0/0x12d @ 1
[ 0.096595] thermal_sys: Registered thermal governor 'fair_share'
[ 0.096596] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.096596] thermal_sys: Registered thermal governor 'step_wise'
[ 0.096597] thermal_sys: Registered thermal governor 'user_space'
[ 0.096604] initcall thermal_init+0x0/0x12d returned 0 after 8 usecs
[ 0.096606] calling cpufreq_gov_performance_init+0x0/0x11 @ 1
[ 0.096608] initcall cpufreq_gov_performance_init+0x0/0x11 returned 0 after 0 usecs
[ 0.096610] calling cpufreq_gov_dbs_init+0x0/0x11 @ 1
[ 0.096612] initcall cpufreq_gov_dbs_init+0x0/0x11 returned 0 after 0 usecs
[ 0.096613] calling map_properties+0x0/0x529 @ 1
[ 0.096614] initcall map_properties+0x0/0x529 returned 0 after 0 usecs
[ 0.096616] calling init_acpi_pm_clocksource+0x0/0xd8 @ 1
[ 0.101108] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.101109] initcall init_acpi_pm_clocksource+0x0/0xd8 returned 0 after 4387 usecs
[ 0.101110] calling powercap_init+0x0/0x267 @ 1
[ 0.101128] initcall powercap_init+0x0/0x267 returned 0 after 16 usecs
[ 0.101129] calling pcibios_assign_resources+0x0/0xcd @ 1
[ 0.101135] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.101146] pci 0000:00:1c.0: bridge window [mem 0xf7100000-0xf71fffff]
[ 0.101152] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 0.101156] pci 0000:00:1c.3: bridge window [mem 0xf7000000-0xf70fffff]
[ 0.101162] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.101163] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.101164] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.101165] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.101166] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.101167] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.101167] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.101168] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.101169] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.101170] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.101170] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.101171] pci_bus 0000:00: resource 15 [mem 0xdf800000-0xfeafffff window]
[ 0.101172] pci_bus 0000:01: resource 1 [mem 0xf7100000-0xf71fffff]
[ 0.101173] pci_bus 0000:02: resource 1 [mem 0xf7000000-0xf70fffff]
[ 0.101250] initcall pcibios_assign_resources+0x0/0xcd returned 0 after 116 usecs
[ 0.101251] calling sysctl_core_init+0x0/0x2b @ 1
[ 0.101263] initcall sysctl_core_init+0x0/0x2b returned 0 after 10 usecs
[ 0.101264] calling eth_offload_init+0x0/0x14 @ 1
[ 0.101265] initcall eth_offload_init+0x0/0x14 returned 0 after 0 usecs
[ 0.101267] calling ipv4_offload_init+0x0/0x74 @ 1
[ 0.101269] initcall ipv4_offload_init+0x0/0x74 returned 0 after 0 usecs
[ 0.101270] calling inet_init+0x0/0x27e @ 1
[ 0.101284] NET: Registered protocol family 2
[ 0.101377] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 0.101393] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.101496] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.101593] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.101615] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.101643] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.101699] initcall inet_init+0x0/0x27e returned 0 after 415 usecs
[ 0.101699] calling af_unix_init+0x0/0x52 @ 1
[ 0.101702] NET: Registered protocol family 1
[ 0.101705] initcall af_unix_init+0x0/0x52 returned 0 after 4 usecs
[ 0.101706] calling ipv6_offload_init+0x0/0x7f @ 1
[ 0.101708] initcall ipv6_offload_init+0x0/0x7f returned 0 after 0 usecs
[ 0.101708] calling vlan_offload_init+0x0/0x20 @ 1
[ 0.101709] initcall vlan_offload_init+0x0/0x20 returned 0 after 0 usecs
[ 0.101710] calling xsk_init+0x0/0x7d @ 1
[ 0.101711] NET: Registered protocol family 44
[ 0.101712] initcall xsk_init+0x0/0x7d returned 0 after 1 usecs
[ 0.101714] calling pci_apply_final_quirks+0x0/0x137 @ 1
[ 0.101720] pci 0000:00:02.0: calling pci_fixup_video+0x0/0xe0 @ 1
[ 0.101723] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.101724] pci 0000:00:02.0: pci_fixup_video+0x0/0xe0 took 2 usecs
[ 0.101730] pci 0000:00:14.0: calling quirk_usb_early_handoff+0x0/0x645 @ 1
[ 0.101897] pci 0000:00:14.0: quirk_usb_early_handoff+0x0/0x645 took 159 usecs
[ 0.101904] pci 0000:00:19.0: calling quirk_e100_interrupt+0x0/0x160 @ 1
[ 0.101906] pci 0000:00:19.0: quirk_e100_interrupt+0x0/0x160 took 0 usecs
[ 0.101921] pci 0000:00:1d.0: calling quirk_usb_early_handoff+0x0/0x645 @ 1
[ 0.124102] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x645 took 21658 usecs
[ 0.126034] PCI: CLS 64 bytes, default 64
[ 0.126036] initcall pci_apply_final_quirks+0x0/0x137 returned 0 after 23750 usecs
[ 0.126037] calling acpi_reserve_resources+0x0/0xeb @ 1
[ 0.126040] initcall acpi_reserve_resources+0x0/0xeb returned 0 after 1 usecs
[ 0.126042] calling populate_rootfs+0x0/0x109 @ 1
[ 0.126067] Trying to unpack rootfs image as initramfs...
[ 0.141896] Freeing initrd memory: 8832K
[ 0.141961] initcall populate_rootfs+0x0/0x109 returned 0 after 15542 usecs
[ 0.141964] calling pci_iommu_init+0x0/0x3f @ 1
[ 0.141988] DMAR: No ATSR found
[ 0.142013] DMAR: dmar1: Using Queued invalidation
[ 0.142131] pci 0000:00:00.0: Adding to iommu group 0
[ 0.142162] pci 0000:00:03.0: Adding to iommu group 1
[ 0.142196] pci 0000:00:04.0: Adding to iommu group 2
[ 0.142250] pci 0000:00:14.0: Adding to iommu group 3
[ 0.142286] pci 0000:00:16.0: Adding to iommu group 4
[ 0.142316] pci 0000:00:19.0: Adding to iommu group 5
[ 0.142350] pci 0000:00:1b.0: Adding to iommu group 6
[ 0.142382] pci 0000:00:1c.0: Adding to iommu group 7
[ 0.142418] pci 0000:00:1c.3: Adding to iommu group 8
[ 0.142473] pci 0000:00:1d.0: Adding to iommu group 9
[ 0.142512] pci 0000:00:1f.0: Adding to iommu group 10
[ 0.142521] pci 0000:00:1f.2: Adding to iommu group 10
[ 0.142528] pci 0000:00:1f.3: Adding to iommu group 10
[ 0.142567] pci 0000:01:00.0: Adding to iommu group 11
[ 0.142600] pci 0000:02:00.0: Adding to iommu group 12
[ 0.142602] DMAR: Intel(R) Virtualization Technology for Directed I/O
[ 0.143862] initcall pci_iommu_init+0x0/0x3f returned 0 after 1849 usecs
[ 0.143864] calling calgary_fixup_tce_spaces+0x0/0xef @ 1
[ 0.143865] initcall calgary_fixup_tce_spaces+0x0/0xef returned -19 after 0 usecs
[ 0.143867] calling ir_dev_scope_init+0x0/0x39 @ 1
[ 0.143868] initcall ir_dev_scope_init+0x0/0x39 returned 0 after 0 usecs
[ 0.143898] calling ia32_binfmt_init+0x0/0x14 @ 1
[ 0.143901] initcall ia32_binfmt_init+0x0/0x14 returned 0 after 2 usecs
[ 0.143902] calling amd_uncore_init+0x0/0x2ce @ 1
[ 0.143903] initcall amd_uncore_init+0x0/0x2ce returned -19 after 0 usecs
[ 0.143904] calling amd_ibs_init+0x0/0x191 @ 1
[ 0.143905] initcall amd_ibs_init+0x0/0x191 returned -19 after 0 usecs
[ 0.143906] calling amd_iommu_pc_init+0x0/0x245 @ 1
[ 0.143907] initcall amd_iommu_pc_init+0x0/0x245 returned -19 after 0 usecs
[ 0.143907] calling msr_init+0x0/0x56 @ 1
[ 0.143910] initcall msr_init+0x0/0x56 returned 0 after 2 usecs
[ 0.143912] calling register_kernel_offset_dumper+0x0/0x1b @ 1
[ 0.143914] initcall register_kernel_offset_dumper+0x0/0x1b returned 0 after 0 usecs
[ 0.143915] calling i8259A_init_ops+0x0/0x21 @ 1
[ 0.143917] initcall i8259A_init_ops+0x0/0x21 returned 0 after 0 usecs
[ 0.143917] calling init_tsc_clocksource+0x0/0xb6 @ 1
[ 0.143920] initcall init_tsc_clocksource+0x0/0xb6 returned 0 after 1 usecs
[ 0.143921] calling add_rtc_cmos+0x0/0xb5 @ 1
[ 0.143922] initcall add_rtc_cmos+0x0/0xb5 returned 0 after 0 usecs
[ 0.143923] calling i8237A_init_ops+0x0/0x37 @ 1
[ 0.143927] initcall i8237A_init_ops+0x0/0x37 returned -19 after 3 usecs
[ 0.143928] calling umwait_init+0x0/0x72 @ 1
[ 0.143929] initcall umwait_init+0x0/0x72 returned -19 after 0 usecs
[ 0.143930] calling thermal_throttle_init_device+0x0/0x47 @ 1
[ 0.143970] initcall thermal_throttle_init_device+0x0/0x47 returned 0 after 36 usecs
[ 0.143972] calling ioapic_init_ops+0x0/0x14 @ 1
[ 0.143973] initcall ioapic_init_ops+0x0/0x14 returned 0 after 0 usecs
[ 0.143974] calling register_e820_pmem+0x0/0x42 @ 1
[ 0.143979] initcall register_e820_pmem+0x0/0x42 returned 0 after 3 usecs
[ 0.143980] calling add_pcspkr+0x0/0x6f @ 1
[ 0.143996] initcall add_pcspkr+0x0/0x6f returned 0 after 14 usecs
[ 0.143997] calling sysfb_init+0x0/0x9f @ 1
[ 0.144018] initcall sysfb_init+0x0/0x9f returned 0 after 20 usecs
[ 0.144019] calling audit_classes_init+0x0/0xaf @ 1
[ 0.144022] initcall audit_classes_init+0x0/0xaf returned 0 after 1 usecs
[ 0.144023] calling pt_dump_init+0x0/0x42 @ 1
[ 0.144024] initcall pt_dump_init+0x0/0x42 returned 0 after 0 usecs
[ 0.144025] calling iosf_mbi_init+0x0/0x2e @ 1
[ 0.144037] initcall iosf_mbi_init+0x0/0x2e returned 0 after 9 usecs
[ 0.144038] calling proc_execdomains_init+0x0/0x22 @ 1
[ 0.144041] initcall proc_execdomains_init+0x0/0x22 returned 0 after 1 usecs
[ 0.144042] calling register_warn_debugfs+0x0/0x24 @ 1
[ 0.144046] initcall register_warn_debugfs+0x0/0x24 returned 0 after 2 usecs
[ 0.144047] calling cpuhp_sysfs_init+0x0/0x80 @ 1
[ 0.144058] initcall cpuhp_sysfs_init+0x0/0x80 returned 0 after 9 usecs
[ 0.144059] calling ioresources_init+0x0/0x4a @ 1
[ 0.144062] initcall ioresources_init+0x0/0x4a returned 0 after 1 usecs
[ 0.144063] calling init_sched_debug_procfs+0x0/0x2f @ 1
[ 0.144065] initcall init_sched_debug_procfs+0x0/0x2f returned 0 after 0 usecs
[ 0.144065] calling psi_proc_init+0x0/0x5b @ 1
[ 0.144068] initcall psi_proc_init+0x0/0x5b returned 0 after 1 usecs
[ 0.144069] calling snapshot_device_init+0x0/0x11 @ 1
[ 0.144089] initcall snapshot_device_init+0x0/0x11 returned 0 after 18 usecs
[ 0.144090] calling irq_gc_init_ops+0x0/0x14 @ 1
[ 0.144091] initcall irq_gc_init_ops+0x0/0x14 returned 0 after 0 usecs
[ 0.144092] calling irq_pm_init_ops+0x0/0x14 @ 1
[ 0.144093] initcall irq_pm_init_ops+0x0/0x14 returned 0 after 0 usecs
[ 0.144093] calling klp_init+0x0/0x29 @ 1
[ 0.144095] initcall klp_init+0x0/0x29 returned 0 after 0 usecs
[ 0.144096] calling timekeeping_init_ops+0x0/0x14 @ 1
[ 0.144097] initcall timekeeping_init_ops+0x0/0x14 returned 0 after 0 usecs
[ 0.144098] calling init_clocksource_sysfs+0x0/0x24 @ 1
[ 0.144115] initcall init_clocksource_sysfs+0x0/0x24 returned 0 after 15 usecs
[ 0.144117] calling init_timer_list_procfs+0x0/0x32 @ 1
[ 0.144118] initcall init_timer_list_procfs+0x0/0x32 returned 0 after 0 usecs
[ 0.144119] calling alarmtimer_init+0x0/0x13a @ 1
[ 0.144144] probe of alarmtimer returned 1 after 4 usecs
[ 0.144146] initcall alarmtimer_init+0x0/0x13a returned 0 after 25 usecs
[ 0.144147] calling init_posix_timers+0x0/0x2a @ 1
[ 0.144150] initcall init_posix_timers+0x0/0x2a returned 0 after 1 usecs
[ 0.144151] calling clockevents_init_sysfs+0x0/0xc0 @ 1
[ 0.144185] initcall clockevents_init_sysfs+0x0/0xc0 returned 0 after 32 usecs
[ 0.144187] calling proc_dma_init+0x0/0x22 @ 1
[ 0.144188] initcall proc_dma_init+0x0/0x22 returned 0 after 0 usecs
[ 0.144189] calling modules_wq_init+0x0/0x44 @ 1
[ 0.144190] initcall modules_wq_init+0x0/0x44 returned 0 after 0 usecs
[ 0.144192] calling proc_modules_init+0x0/0x1f @ 1
[ 0.144193] initcall proc_modules_init+0x0/0x1f returned 0 after 0 usecs
[ 0.144194] calling kallsyms_init+0x0/0x22 @ 1
[ 0.144196] initcall kallsyms_init+0x0/0x22 returned 0 after 0 usecs
[ 0.144197] calling pid_namespaces_init+0x0/0x40 @ 1
[ 0.144206] initcall pid_namespaces_init+0x0/0x40 returned 0 after 7 usecs
[ 0.144208] calling audit_watch_init+0x0/0x3a @ 1
[ 0.144209] initcall audit_watch_init+0x0/0x3a returned 0 after 0 usecs
[ 0.144210] calling audit_fsnotify_init+0x0/0x3a @ 1
[ 0.144211] initcall audit_fsnotify_init+0x0/0x3a returned 0 after 0 usecs
[ 0.144212] calling audit_tree_init+0x0/0x6e @ 1
[ 0.144215] initcall audit_tree_init+0x0/0x6e returned 0 after 1 usecs
[ 0.144216] calling seccomp_sysctl_init+0x0/0x2c @ 1
[ 0.144220] initcall seccomp_sysctl_init+0x0/0x2c returned 0 after 2 usecs
[ 0.144221] calling utsname_sysctl_init+0x0/0x14 @ 1
[ 0.144226] initcall utsname_sysctl_init+0x0/0x14 returned 0 after 3 usecs
[ 0.144228] calling init_tracepoints+0x0/0x2c @ 1
[ 0.144230] initcall init_tracepoints+0x0/0x2c returned 0 after 0 usecs
[ 0.144231] calling stack_trace_init+0x0/0xb2 @ 1
[ 0.144239] initcall stack_trace_init+0x0/0xb2 returned 0 after 6 usecs
[ 0.144240] calling init_mmio_trace+0x0/0xc @ 1
[ 0.144243] initcall init_mmio_trace+0x0/0xc returned 0 after 1 usecs
[ 0.144244] calling init_blk_tracer+0x0/0x50 @ 1
[ 0.144252] initcall init_blk_tracer+0x0/0x50 returned 0 after 6 usecs
[ 0.144253] calling perf_event_sysfs_init+0x0/0x81 @ 1
[ 0.144336] initcall perf_event_sysfs_init+0x0/0x81 returned 0 after 79 usecs
[ 0.144337] calling padata_driver_init+0x0/0x39 @ 1
[ 0.144338] initcall padata_driver_init+0x0/0x39 returned 0 after 0 usecs
[ 0.144339] calling system_trusted_keyring_init+0x0/0xf4 @ 1
[ 0.144339] Initialise system trusted keyrings
[ 0.144346] initcall system_trusted_keyring_init+0x0/0xf4 returned 0 after 6 usecs
[ 0.144347] calling blacklist_init+0x0/0x9b @ 1
[ 0.144348] Key type blacklist registered
[ 0.144350] initcall blacklist_init+0x0/0x9b returned 0 after 2 usecs
[ 0.144352] calling kswapd_init+0x0/0x85 @ 1
[ 0.144382] initcall kswapd_init+0x0/0x85 returned 0 after 26 usecs
[ 0.144384] calling extfrag_debug_init+0x0/0x57 @ 1
[ 0.144390] initcall extfrag_debug_init+0x0/0x57 returned 0 after 4 usecs
[ 0.144391] calling mm_compute_batch_init+0x0/0x19 @ 1
[ 0.144393] initcall mm_compute_batch_init+0x0/0x19 returned 0 after 0 usecs
[ 0.144394] calling slab_proc_init+0x0/0x22 @ 1
[ 0.144397] initcall slab_proc_init+0x0/0x22 returned 0 after 2 usecs
[ 0.144398] calling workingset_init+0x0/0x92 @ 1
[ 0.144399] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[ 0.144401] initcall workingset_init+0x0/0x92 returned 0 after 2 usecs
[ 0.144402] calling proc_vmalloc_init+0x0/0x30 @ 1
[ 0.144404] initcall proc_vmalloc_init+0x0/0x30 returned 0 after 0 usecs
[ 0.144406] calling procswaps_init+0x0/0x1f @ 1
[ 0.144408] initcall procswaps_init+0x0/0x1f returned 0 after 0 usecs
[ 0.144409] calling init_frontswap+0x0/0x93 @ 1
[ 0.144414] initcall init_frontswap+0x0/0x93 returned 0 after 3 usecs
[ 0.144415] calling slab_sysfs_init+0x0/0xf3 @ 1
[ 0.145410] initcall slab_sysfs_init+0x0/0xf3 returned 0 after 969 usecs
[ 0.145411] calling init_zbud+0x0/0x20 @ 1
[ 0.145412] zbud: loaded
[ 0.145413] initcall init_zbud+0x0/0x20 returned 0 after 0 usecs
[ 0.145414] calling fcntl_init+0x0/0x2a @ 1
[ 0.145417] initcall fcntl_init+0x0/0x2a returned 0 after 1 usecs
[ 0.145418] calling proc_filesystems_init+0x0/0x22 @ 1
[ 0.145420] initcall proc_filesystems_init+0x0/0x22 returned 0 after 0 usecs
[ 0.145421] calling start_dirtytime_writeback+0x0/0x2a @ 1
[ 0.145423] initcall start_dirtytime_writeback+0x0/0x2a returned 0 after 0 usecs
[ 0.145424] calling blkdev_init+0x0/0x20 @ 1
[ 0.145428] initcall blkdev_init+0x0/0x20 returned 0 after 2 usecs
[ 0.145429] calling dio_init+0x0/0x2d @ 1
[ 0.145431] initcall dio_init+0x0/0x2d returned 0 after 1 usecs
[ 0.145432] calling dnotify_init+0x0/0x79 @ 1
[ 0.145452] initcall dnotify_init+0x0/0x79 returned 0 after 18 usecs
[ 0.145453] calling fanotify_user_setup+0x0/0x77 @ 1
[ 0.145458] initcall fanotify_user_setup+0x0/0x77 returned 0 after 3 usecs
[ 0.145459] calling userfaultfd_init+0x0/0x2e @ 1
[ 0.145472] initcall userfaultfd_init+0x0/0x2e returned 0 after 11 usecs
[ 0.145473] calling aio_setup+0x0/0x79 @ 1
[ 0.145485] initcall aio_setup+0x0/0x79 returned 0 after 10 usecs
[ 0.145486] calling io_uring_init+0x0/0x2d @ 1
[ 0.145489] initcall io_uring_init+0x0/0x2d returned 0 after 1 usecs
[ 0.145490] calling init_sys32_ioctl+0x0/0x28 @ 1
[ 0.145558] initcall init_sys32_ioctl+0x0/0x28 returned 0 after 65 usecs
[ 0.145559] calling init_devpts_fs+0x0/0x2c @ 1
[ 0.145566] initcall init_devpts_fs+0x0/0x2c returned 0 after 5 usecs
[ 0.145567] calling ipc_init+0x0/0x25 @ 1
[ 0.145572] initcall ipc_init+0x0/0x25 returned 0 after 3 usecs
[ 0.145573] calling ipc_sysctl_init+0x0/0x14 @ 1
[ 0.145581] initcall ipc_sysctl_init+0x0/0x14 returned 0 after 5 usecs
[ 0.145582] calling init_mqueue_fs+0x0/0xe2 @ 1
[ 0.145609] initcall init_mqueue_fs+0x0/0xe2 returned 0 after 25 usecs
[ 0.145611] calling key_proc_init+0x0/0x64 @ 1
[ 0.145613] initcall key_proc_init+0x0/0x64 returned 0 after 1 usecs
[ 0.145615] calling selinux_nf_ip_init+0x0/0x49 @ 1
[ 0.145617] initcall selinux_nf_ip_init+0x0/0x49 returned 0 after 0 usecs
[ 0.145618] calling init_sel_fs+0x0/0x127 @ 1
[ 0.145619] initcall init_sel_fs+0x0/0x127 returned 0 after 0 usecs
[ 0.145621] calling selnl_init+0x0/0x7d @ 1
[ 0.145630] initcall selnl_init+0x0/0x7d returned 0 after 6 usecs
[ 0.145631] calling sel_netif_init+0x0/0x37 @ 1
[ 0.145632] initcall sel_netif_init+0x0/0x37 returned 0 after 0 usecs
[ 0.145634] calling sel_netnode_init+0x0/0x32 @ 1
[ 0.145635] initcall sel_netnode_init+0x0/0x32 returned 0 after 0 usecs
[ 0.145637] calling sel_netport_init+0x0/0x32 @ 1
[ 0.145638] initcall sel_netport_init+0x0/0x32 returned 0 after 0 usecs
[ 0.145639] calling aurule_init+0x0/0x2b @ 1
[ 0.145641] initcall aurule_init+0x0/0x2b returned 0 after 0 usecs
[ 0.145642] calling apparmor_nf_ip_init+0x0/0x2f @ 1
[ 0.145671] initcall apparmor_nf_ip_init+0x0/0x2f returned 0 after 25 usecs
[ 0.145673] calling platform_keyring_init+0x0/0x2a @ 1
[ 0.145675] Platform Keyring initialized
[ 0.145677] initcall platform_keyring_init+0x0/0x2a returned 0 after 2 usecs
[ 0.145679] calling crypto_algapi_init+0x0/0xd @ 1
[ 0.145681] initcall crypto_algapi_init+0x0/0xd returned 0 after 0 usecs
[ 0.145683] calling asymmetric_key_init+0x0/0x11 @ 1
[ 0.145684] Key type asymmetric registered
[ 0.145685] initcall asymmetric_key_init+0x0/0x11 returned 0 after 1 usecs
[ 0.145687] calling x509_key_init+0x0/0x11 @ 1
[ 0.145688] Asymmetric key parser 'x509' registered
[ 0.145689] initcall x509_key_init+0x0/0x11 returned 0 after 0 usecs
[ 0.145690] calling proc_genhd_init+0x0/0x42 @ 1
[ 0.145692] initcall proc_genhd_init+0x0/0x42 returned 0 after 1 usecs
[ 0.145693] calling bsg_init+0x0/0x15a @ 1
[ 0.145698] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.145699] initcall bsg_init+0x0/0x15a returned 0 after 4 usecs
[ 0.145700] calling throtl_init+0x0/0x3c @ 1
[ 0.145738] initcall throtl_init+0x0/0x3c returned 0 after 36 usecs
[ 0.145739] calling deadline_init+0x0/0x11 @ 1
[ 0.145740] io scheduler mq-deadline registered
[ 0.145741] initcall deadline_init+0x0/0x11 returned 0 after 0 usecs
[ 0.145742] calling btree_module_init+0x0/0x25 @ 1
[ 0.145746] initcall btree_module_init+0x0/0x25 returned 0 after 2 usecs
[ 0.145747] calling crc_t10dif_mod_init+0x0/0x45 @ 1
[ 0.145750] initcall crc_t10dif_mod_init+0x0/0x45 returned 0 after 2 usecs
[ 0.145751] calling percpu_counter_startup+0x0/0x51 @ 1
[ 0.145768] initcall percpu_counter_startup+0x0/0x51 returned 0 after 15 usecs
[ 0.145769] calling digsig_init+0x0/0x39 @ 1
[ 0.145771] initcall digsig_init+0x0/0x39 returned 0 after 0 usecs
[ 0.145772] calling sg_pool_init+0x0/0xb0 @ 1
[ 0.145786] initcall sg_pool_init+0x0/0xb0 returned 0 after 13 usecs
[ 0.145787] calling phy_core_init+0x0/0x4a @ 1
[ 0.145791] initcall phy_core_init+0x0/0x4a returned 0 after 2 usecs
[ 0.145792] calling amd_gpio_driver_init+0x0/0x13 @ 1
[ 0.145808] initcall amd_gpio_driver_init+0x0/0x13 returned 0 after 15 usecs
[ 0.145809] calling cnl_pinctrl_driver_init+0x0/0x13 @ 1
[ 0.145819] initcall cnl_pinctrl_driver_init+0x0/0x13 returned 0 after 8 usecs
[ 0.145820] calling icl_pinctrl_driver_init+0x0/0x13 @ 1
[ 0.145828] initcall icl_pinctrl_driver_init+0x0/0x13 returned 0 after 7 usecs
[ 0.145829] calling lbg_pinctrl_driver_init+0x0/0x13 @ 1
[ 0.145838] initcall lbg_pinctrl_driver_init+0x0/0x13 returned 0 after 7 usecs
[ 0.145839] calling pci_proc_init+0x0/0x6c @ 1
[ 0.145862] initcall pci_proc_init+0x0/0x6c returned 0 after 13 usecs
[ 0.145863] calling pcie_portdrv_init+0x0/0x49 @ 1
[ 0.146071] pcieport 0000:00:1c.0: PME: Signaling with IRQ 42
[ 0.146082] probe of 0000:00:1c.0:pcie001 returned 1 after 31 usecs
[ 0.146132] probe of 0000:00:1c.0 returned 1 after 256 usecs
[ 0.146274] pcieport 0000:00:1c.3: PME: Signaling with IRQ 43
[ 0.146279] probe of 0000:00:1c.3:pcie001 returned 1 after 21 usecs
[ 0.146326] probe of 0000:00:1c.3 returned 1 after 192 usecs
[ 0.146333] initcall pcie_portdrv_init+0x0/0x49 returned 0 after 457 usecs
[ 0.146334] calling pci_hotplug_init+0x0/0x35 @ 1
[ 0.146335] initcall pci_hotplug_init+0x0/0x35 returned 0 after 0 usecs
[ 0.146336] calling shpcd_init+0x0/0x5d @ 1
[ 0.146343] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.146344] initcall shpcd_init+0x0/0x5d returned 0 after 6 usecs
[ 0.146345] calling xenfb_init+0x0/0x3b @ 1
[ 0.146346] initcall xenfb_init+0x0/0x3b returned -19 after 0 usecs
[ 0.146347] calling vesafb_driver_init+0x0/0x13 @ 1
[ 0.146356] initcall vesafb_driver_init+0x0/0x13 returned 0 after 7 usecs
[ 0.146357] calling efifb_driver_init+0x0/0x13 @ 1
[ 0.146363] efifb: probing for efifb
[ 0.146383] efifb: framebuffer at 0xe0000000, using 4160k, total 4160k
[ 0.146384] efifb: mode is 1366x768x32, linelength=5504, pages=1
[ 0.146384] efifb: scrolling: redraw
[ 0.146385] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.146450] Console: switching to colour frame buffer device 170x48
[ 0.148315] fb0: EFI VGA frame buffer device
[ 0.148318] probe of efi-framebuffer.0 returned 1 after 1956 usecs
[ 0.148322] initcall efifb_driver_init+0x0/0x13 returned 0 after 1916 usecs
[ 0.148323] calling intel_idle_init+0x0/0x5c6 @ 1
[ 0.148324] intel_idle: MWAIT substates: 0x11142120
[ 0.148325] intel_idle: v0.4.1 model 0x3D
[ 0.148528] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.148530] initcall intel_idle_init+0x0/0x5c6 returned 0 after 200 usecs
[ 0.148533] calling acpi_processor_driver_init+0x0/0xb7 @ 1
[ 0.148596] probe of cpu0 returned 1 after 59 usecs
[ 0.148646] probe of cpu1 returned 1 after 47 usecs
[ 0.148695] probe of cpu2 returned 1 after 47 usecs
[ 0.148741] probe of cpu3 returned 1 after 44 usecs
[ 0.148747] initcall acpi_processor_driver_init+0x0/0xb7 returned 0 after 207 usecs
[ 0.148749] calling acpi_thermal_init+0x0/0x82 @ 1
[ 0.149560] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.149561] ACPI: Thermal Zone [THM] (25 C)
[ 0.149566] probe of LNXTHERM:00 returned 1 after 736 usecs
[ 0.149900] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.149901] ACPI: Thermal Zone [TZ00] (28 C)
[ 0.149905] probe of LNXTHERM:01 returned 1 after 333 usecs
[ 0.150127] thermal LNXTHERM:02: registered as thermal_zone2
[ 0.150128] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.150131] probe of LNXTHERM:02 returned 1 after 224 usecs
[ 0.150138] initcall acpi_thermal_init+0x0/0x82 returned 0 after 1354 usecs
[ 0.150140] calling acpi_hed_driver_init+0x0/0x11 @ 1
[ 0.150193] initcall acpi_hed_driver_init+0x0/0x11 returned 0 after 49 usecs
[ 0.150194] calling bgrt_init+0x0/0xbe @ 1
[ 0.150201] initcall bgrt_init+0x0/0xbe returned 0 after 4 usecs
[ 0.150203] calling erst_init+0x0/0x2fd @ 1
[ 0.150205] initcall erst_init+0x0/0x2fd returned 0 after 0 usecs
[ 0.150207] calling ghes_init+0x0/0xe6 @ 1
[ 0.150209] initcall ghes_init+0x0/0xe6 returned -19 after 0 usecs
[ 0.150210] calling extlog_init+0x0/0x38e @ 1
[ 0.150212] initcall extlog_init+0x0/0x38e returned -19 after 0 usecs
[ 0.150214] calling gpio_clk_driver_init+0x0/0x13 @ 1
[ 0.150227] initcall gpio_clk_driver_init+0x0/0x13 returned 0 after 10 usecs
[ 0.150229] calling plt_clk_driver_init+0x0/0x13 @ 1
[ 0.150237] initcall plt_clk_driver_init+0x0/0x13 returned 0 after 6 usecs
[ 0.150239] calling st_clk_driver_init+0x0/0x13 @ 1
[ 0.150247] initcall st_clk_driver_init+0x0/0x13 returned 0 after 5 usecs
[ 0.150248] calling xenbus_probe_initcall+0x0/0x42 @ 1
[ 0.150250] initcall xenbus_probe_initcall+0x0/0x42 returned -19 after 0 usecs
[ 0.150251] calling xenbus_init+0x0/0x3b @ 1
[ 0.150253] initcall xenbus_init+0x0/0x3b returned -19 after 0 usecs
[ 0.150254] calling xenbus_backend_init+0x0/0x44 @ 1
[ 0.150255] initcall xenbus_backend_init+0x0/0x44 returned -19 after 0 usecs
[ 0.150256] calling hyper_sysfs_init+0x0/0x182 @ 1
[ 0.150258] initcall hyper_sysfs_init+0x0/0x182 returned -19 after 0 usecs
[ 0.150259] calling hypervisor_subsys_init+0x0/0x25 @ 1
[ 0.150260] initcall hypervisor_subsys_init+0x0/0x25 returned -19 after 0 usecs
[ 0.150262] calling platform_driver_init+0x0/0x1a @ 1
[ 0.150272] initcall platform_driver_init+0x0/0x1a returned 0 after 9 usecs
[ 0.150273] calling xen_late_init_mcelog+0x0/0x5e @ 1
[ 0.150275] initcall xen_late_init_mcelog+0x0/0x5e returned -19 after 0 usecs
[ 0.150276] calling n_null_init+0x0/0x1f @ 1
[ 0.150278] initcall n_null_init+0x0/0x1f returned 0 after 0 usecs
[ 0.150279] calling pty_init+0x0/0x1ee @ 1
[ 0.150312] initcall pty_init+0x0/0x1ee returned 0 after 30 usecs
[ 0.150313] calling sysrq_init+0x0/0x6c @ 1
[ 0.150316] initcall sysrq_init+0x0/0x6c returned 0 after 1 usecs
[ 0.150317] calling xen_hvc_init+0x0/0x258 @ 1
[ 0.150319] initcall xen_hvc_init+0x0/0x258 returned -19 after 0 usecs
[ 0.150320] calling serial8250_init+0x0/0x15d @ 1
[ 0.150321] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.150677] probe of serial8250 returned 1 after 12 usecs
[ 0.150683] initcall serial8250_init+0x0/0x15d returned 0 after 351 usecs
[ 0.150684] calling serial_pci_driver_init+0x0/0x1a @ 1
[ 0.150704] initcall serial_pci_driver_init+0x0/0x1a returned 0 after 18 usecs
[ 0.150706] calling dw8250_platform_driver_init+0x0/0x13 @ 1
[ 0.150718] initcall dw8250_platform_driver_init+0x0/0x13 returned 0 after 10 usecs
[ 0.150719] calling mid8250_pci_driver_init+0x0/0x1a @ 1
[ 0.150727] initcall mid8250_pci_driver_init+0x0/0x1a returned 0 after 6 usecs
[ 0.150728] calling hpet_init+0x0/0x6b @ 1
[ 0.150882] probe of PNP0103:00 returned 0 after 87 usecs
[ 0.150916] initcall hpet_init+0x0/0x6b returned 0 after 181 usecs
[ 0.150917] calling agp_init+0x0/0x24 @ 1
[ 0.150918] Linux agpgart interface v0.103
[ 0.150920] initcall agp_init+0x0/0x24 returned 0 after 0 usecs
[ 0.150921] calling agp_amd64_mod_init+0x0/0x20 @ 1
[ 0.150948] initcall agp_amd64_mod_init+0x0/0x20 returned -19 after 24 usecs
[ 0.150949] calling agp_intel_init+0x0/0x29 @ 1
[ 0.150958] initcall agp_intel_init+0x0/0x29 returned 0 after 7 usecs
[ 0.150960] calling agp_sis_init+0x0/0x29 @ 1
[ 0.150968] initcall agp_sis_init+0x0/0x29 returned 0 after 6 usecs
[ 0.150969] calling agp_via_init+0x0/0x29 @ 1
[ 0.150977] initcall agp_via_init+0x0/0x29 returned 0 after 6 usecs
[ 0.150978] calling amd_iommu_v2_init+0x0/0x6d @ 1
[ 0.150979] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 0.150979] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[ 0.150981] initcall amd_iommu_v2_init+0x0/0x6d returned 0 after 1 usecs
[ 0.150983] calling cn_proc_init+0x0/0x3a @ 1
[ 0.150985] initcall cn_proc_init+0x0/0x3a returned 0 after 0 usecs
[ 0.150987] calling topology_sysfs_init+0x0/0x30 @ 1
[ 0.151015] initcall topology_sysfs_init+0x0/0x30 returned 0 after 25 usecs
[ 0.151017] calling cacheinfo_sysfs_init+0x0/0x2c @ 1
[ 0.151195] initcall cacheinfo_sysfs_init+0x0/0x2c returned 0 after 171 usecs
[ 0.151196] calling devcoredump_init+0x0/0x18 @ 1
[ 0.151202] initcall devcoredump_init+0x0/0x18 returned 0 after 3 usecs
[ 0.151203] calling mac_hid_init+0x0/0x22 @ 1
[ 0.151207] initcall mac_hid_init+0x0/0x22 returned 0 after 2 usecs
[ 0.151208] calling spidev_init+0x0/0xb1 @ 1
[ 0.151216] initcall spidev_init+0x0/0xb1 returned 0 after 6 usecs
[ 0.151218] calling net_olddevs_init+0x0/0x5b @ 1
[ 0.151222] initcall net_olddevs_init+0x0/0x5b returned 0 after 2 usecs
[ 0.151224] calling blackhole_netdev_init+0x0/0x7c @ 1
[ 0.151230] initcall blackhole_netdev_init+0x0/0x7c returned 0 after 3 usecs
[ 0.151231] calling i8042_init+0x0/0x494 @ 1
[ 0.151243] probe of 00:03 returned 1 after 5 usecs
[ 0.151254] probe of 00:04 returned 1 after 3 usecs
[ 0.151259] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.151808] i8042: Warning: Keylock active
[ 0.154133] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.154135] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.154164] probe of i8042 returned 1 after 2642 usecs
[ 0.154168] initcall i8042_init+0x0/0x494 returned 0 after 2866 usecs
[ 0.154169] calling input_leds_init+0x0/0x11 @ 1
[ 0.154171] initcall input_leds_init+0x0/0x11 returned 0 after 0 usecs
[ 0.154172] calling mousedev_init+0x0/0x86 @ 1
[ 0.154232] mousedev: PS/2 mouse device common for all mice
[ 0.154234] initcall mousedev_init+0x0/0x86 returned 0 after 59 usecs
[ 0.154235] calling atkbd_init+0x0/0x26 @ 1
[ 0.154252] initcall atkbd_init+0x0/0x26 returned 0 after 14 usecs
[ 0.154253] calling xenkbd_init+0x0/0x3b @ 1
[ 0.154254] initcall xenkbd_init+0x0/0x3b returned -19 after 0 usecs
[ 0.154255] calling cmos_init+0x0/0x70 @ 1
[ 0.154278] rtc_cmos 00:01: RTC can wake from S4
[ 0.154476] rtc_cmos 00:01: registered as rtc0
[ 0.154492] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.154494] probe of 00:01 returned 1 after 225 usecs
[ 0.154500] initcall cmos_init+0x0/0x70 returned 0 after 236 usecs
[ 0.154501] calling intel_pstate_init+0x0/0x42c @ 1
[ 0.154506] intel_pstate: Intel P-state driver initializing
[ 0.154621] initcall intel_pstate_init+0x0/0x42c returned 0 after 115 usecs
[ 0.154637] calling haltpoll_init+0x0/0xc0 @ 1
[ 0.154643] initcall haltpoll_init+0x0/0xc0 returned -19 after 0 usecs
[ 0.154649] calling ledtrig_disk_init+0x0/0x54 @ 1
[ 0.154658] initcall ledtrig_disk_init+0x0/0x54 returned 0 after 3 usecs
[ 0.154665] calling ledtrig_mtd_init+0x0/0x2e @ 1
[ 0.154689] initcall ledtrig_mtd_init+0x0/0x2e returned 0 after 17 usecs
[ 0.154694] calling ledtrig_cpu_init+0x0/0xd0 @ 1
[ 0.154776] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.154782] initcall ledtrig_cpu_init+0x0/0xd0 returned 0 after 80 usecs
[ 0.154788] calling ledtrig_panic_init+0x0/0x39 @ 1
[ 0.154809] initcall ledtrig_panic_init+0x0/0x39 returned 0 after 14 usecs
[ 0.154812] calling dmi_sysfs_init+0x0/0xe8 @ 1
[ 0.155578] initcall dmi_sysfs_init+0x0/0xe8 returned 0 after 743 usecs
[ 0.155581] calling efi_load_efivars+0x0/0x71 @ 1
[ 0.155682] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.155799] probe of serio0 returned 1 after 1540 usecs
[ 0.157123] initcall efi_load_efivars+0x0/0x71 returned 0 after 1500 usecs
[ 0.157127] calling esrt_sysfs_init+0x0/0x2f1 @ 1
[ 0.157131] initcall esrt_sysfs_init+0x0/0x2f1 returned -38 after 0 usecs
[ 0.157134] calling pmc_atom_init+0x0/0x27f @ 1
[ 0.157149] initcall pmc_atom_init+0x0/0x27f returned -19 after 10 usecs
[ 0.157156] calling pm_check_save_msr+0x0/0x40 @ 1
[ 0.157163] initcall pm_check_save_msr+0x0/0x40 returned 0 after 1 usecs
[ 0.157168] calling sock_diag_init+0x0/0x2f @ 1
[ 0.157215] initcall sock_diag_init+0x0/0x2f returned 0 after 40 usecs
[ 0.157221] calling init_net_drop_monitor+0x0/0xf3 @ 1
[ 0.157223] drop_monitor: Initializing network drop monitor service
[ 0.157251] initcall init_net_drop_monitor+0x0/0xf3 returned 0 after 24 usecs
[ 0.157256] calling blackhole_init+0x0/0x11 @ 1
[ 0.157262] initcall blackhole_init+0x0/0x11 returned 0 after 1 usecs
[ 0.157268] calling gre_offload_init+0x0/0x4e @ 1
[ 0.157274] initcall gre_offload_init+0x0/0x4e returned 0 after 0 usecs
[ 0.157279] calling sysctl_ipv4_init+0x0/0x4c @ 1
[ 0.157406] initcall sysctl_ipv4_init+0x0/0x4c returned 0 after 117 usecs
[ 0.157412] calling cubictcp_register+0x0/0x58 @ 1
[ 0.157418] initcall cubictcp_register+0x0/0x58 returned 0 after 1 usecs
[ 0.157421] calling inet6_init+0x0/0x380 @ 1
[ 0.157688] NET: Registered protocol family 10
[ 0.160773] probe of serio1 returned 0 after 4967 usecs
[ 0.175423] Segment Routing with IPv6
[ 0.175458] initcall inet6_init+0x0/0x380 returned 0 after 17609 usecs
[ 0.175461] calling mip6_init+0x0/0xba @ 1
[ 0.175461] mip6: Mobile IPv6
[ 0.175464] initcall mip6_init+0x0/0xba returned 0 after 0 usecs
[ 0.175466] calling packet_init+0x0/0x7d @ 1
[ 0.175467] NET: Registered protocol family 17
[ 0.175473] initcall packet_init+0x0/0x7d returned 0 after 5 usecs
[ 0.175475] calling strp_dev_init+0x0/0x33 @ 1
[ 0.175597] initcall strp_dev_init+0x0/0x33 returned 0 after 116 usecs
[ 0.175600] calling dcbnl_init+0x0/0x4e @ 1
[ 0.175604] initcall dcbnl_init+0x0/0x4e returned 0 after 1 usecs
[ 0.175605] calling mpls_gso_init+0x0/0x2c @ 1
[ 0.175606] mpls_gso: MPLS GSO support
[ 0.175608] initcall mpls_gso_init+0x0/0x2c returned 0 after 1 usecs
[ 0.175610] calling mcheck_init_device+0x0/0x127 @ 1
[ 0.175841] initcall mcheck_init_device+0x0/0x127 returned 0 after 222 usecs
[ 0.175890] calling mcheck_late_init+0x0/0x6b @ 1
[ 0.175897] initcall mcheck_late_init+0x0/0x6b returned 0 after 5 usecs
[ 0.175899] calling severities_debugfs_init+0x0/0x2a @ 1
[ 0.175903] initcall severities_debugfs_init+0x0/0x2a returned 0 after 1 usecs
[ 0.175904] calling threshold_init_device+0x0/0x46 @ 1
[ 0.175906] initcall threshold_init_device+0x0/0x46 returned 0 after 0 usecs
[ 0.175908] calling microcode_init+0x0/0x1e6 @ 1
[ 0.175943] microcode: sig=0x306d4, pf=0x40, revision=0x2e
[ 0.175971] microcode: Microcode Update Driver: v2.2.
[ 0.175974] initcall microcode_init+0x0/0x1e6 returned 0 after 61 usecs
[ 0.175976] calling hpet_insert_resource+0x0/0x23 @ 1
[ 0.175980] initcall hpet_insert_resource+0x0/0x23 returned 0 after 1 usecs
[ 0.175983] calling update_mp_table+0x0/0x510 @ 1
[ 0.175986] initcall update_mp_table+0x0/0x510 returned 0 after 0 usecs
[ 0.175988] calling lapic_insert_resource+0x0/0x43 @ 1
[ 0.175992] initcall lapic_insert_resource+0x0/0x43 returned 0 after 1 usecs
[ 0.175995] calling print_ipi_mode+0x0/0x2d @ 1
[ 0.175996] IPI shorthand broadcast: enabled
[ 0.175998] initcall print_ipi_mode+0x0/0x2d returned 0 after 1 usecs
[ 0.176001] calling print_ICs+0x0/0x18b @ 1
[ 0.176004] initcall print_ICs+0x0/0x18b returned 0 after 0 usecs
[ 0.176020] calling pat_memtype_list_init+0x0/0x32 @ 1
[ 0.176025] initcall pat_memtype_list_init+0x0/0x32 returned 0 after 2 usecs
[ 0.176027] calling create_tlb_single_page_flush_ceiling+0x0/0x29 @ 1
[ 0.176031] initcall create_tlb_single_page_flush_ceiling+0x0/0x29 returned 0 after 1 usecs
[ 0.176033] calling create_init_pkru_value+0x0/0x29 @ 1
[ 0.176037] initcall create_init_pkru_value+0x0/0x29 returned 0 after 1 usecs
[ 0.176040] calling init_oops_id+0x0/0x40 @ 1
[ 0.176042] initcall init_oops_id+0x0/0x40 returned 0 after 1 usecs
[ 0.176044] calling sched_clock_init_late+0x0/0x7b @ 1
[ 0.176046] sched_clock: Marking stable (200003195, -23996536)->(181292554, -5285895)
[ 0.176101] initcall sched_clock_init_late+0x0/0x7b returned 0 after 53 usecs
[ 0.176103] calling sched_init_debug+0x0/0x3e @ 1
[ 0.176107] initcall sched_init_debug+0x0/0x3e returned 0 after 2 usecs
[ 0.176108] calling pm_qos_power_init+0x0/0x80 @ 1
[ 0.176151] initcall pm_qos_power_init+0x0/0x80 returned 0 after 39 usecs
[ 0.176153] calling pm_debugfs_init+0x0/0x24 @ 1
[ 0.176156] initcall pm_debugfs_init+0x0/0x24 returned 0 after 1 usecs
[ 0.176158] calling printk_late_init+0x0/0x11d @ 1
[ 0.176161] initcall printk_late_init+0x0/0x11d returned 0 after 0 usecs
[ 0.176162] calling init_srcu_module_notifier+0x0/0x2c @ 1
[ 0.176165] initcall init_srcu_module_notifier+0x0/0x2c returned 0 after 1 usecs
[ 0.176167] calling swiotlb_create_debugfs+0x0/0x53 @ 1
[ 0.176173] initcall swiotlb_create_debugfs+0x0/0x53 returned 0 after 4 usecs
[ 0.176175] calling tk_debug_sleep_time_init+0x0/0x24 @ 1
[ 0.176179] initcall tk_debug_sleep_time_init+0x0/0x24 returned 0 after 1 usecs
[ 0.176182] calling debugfs_kprobe_init+0x0/0xb4 @ 1
[ 0.176193] initcall debugfs_kprobe_init+0x0/0xb4 returned 0 after 8 usecs
[ 0.176195] calling taskstats_init+0x0/0x3b @ 1
[ 0.176205] registered taskstats version 1
[ 0.176208] initcall taskstats_init+0x0/0x3b returned 0 after 9 usecs
[ 0.176210] calling load_system_certificate_list+0x0/0xe4 @ 1
[ 0.176211] Loading compiled-in X.509 certificates
[ 0.178672] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
[ 0.178699] Loaded X.509 cert 'Debian Secure Boot Signer: 00a7468def'
[ 0.178704] initcall load_system_certificate_list+0x0/0xe4 returned 0 after 2431 usecs
[ 0.178708] calling memcg_slabinfo_init+0x0/0x24 @ 1
[ 0.178714] initcall memcg_slabinfo_init+0x0/0x24 returned 0 after 4 usecs
[ 0.178717] calling fault_around_debugfs+0x0/0x24 @ 1
[ 0.178720] initcall fault_around_debugfs+0x0/0x24 returned 0 after 1 usecs
[ 0.178723] calling max_swapfiles_check+0x0/0x8 @ 1
[ 0.178726] initcall max_swapfiles_check+0x0/0x8 returned 0 after 0 usecs
[ 0.178728] calling init_zswap+0x0/0x43b @ 1
[ 0.178750] zswap: loaded using pool lzo/zbud
[ 0.178788] initcall init_zswap+0x0/0x43b returned 0 after 54 usecs
[ 0.178791] calling split_huge_pages_debugfs+0x0/0x24 @ 1
[ 0.178795] initcall split_huge_pages_debugfs+0x0/0x24 returned 0 after 1 usecs
[ 0.178796] calling check_early_ioremap_leak+0x0/0x39 @ 1
[ 0.178798] initcall check_early_ioremap_leak+0x0/0x39 returned 0 after 0 usecs
[ 0.178800] calling set_hardened_usercopy+0x0/0x20 @ 1
[ 0.178801] initcall set_hardened_usercopy+0x0/0x20 returned 1 after 0 usecs
[ 0.178803] calling fscrypt_init+0x0/0xc6 @ 1
[ 0.178879] Key type ._fscrypt registered
[ 0.178880] Key type .fscrypt registered
[ 0.178883] initcall fscrypt_init+0x0/0xc6 returned 0 after 75 usecs
[ 0.178886] calling pstore_init+0x0/0x14 @ 1
[ 0.178891] initcall pstore_init+0x0/0x14 returned 0 after 3 usecs
[ 0.178893] calling init_root_keyring+0x0/0xe @ 1
[ 0.178905] initcall init_root_keyring+0x0/0xe returned 0 after 9 usecs
[ 0.178907] calling init_profile_hash+0x0/0x83 @ 1
[ 0.178910] AppArmor: AppArmor sha1 policy hashing enabled
[ 0.178912] initcall init_profile_hash+0x0/0x83 returned 0 after 2 usecs
[ 0.178915] calling lockdown_lift_sysrq+0x0/0x2d @ 1
[ 0.178917] initcall lockdown_lift_sysrq+0x0/0x2d returned 0 after 0 usecs
[ 0.178920] calling integrity_fs_init+0x0/0x4f @ 1
[ 0.178925] initcall integrity_fs_init+0x0/0x4f returned 0 after 2 usecs
[ 0.178927] calling load_uefi_certs+0x0/0x303 @ 1
[ 0.179096] integrity: Loading X.509 certificate: UEFI:db
[ 0.179130] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[ 0.179131] integrity: Loading X.509 certificate: UEFI:db
[ 0.179159] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[ 0.179246] initcall load_uefi_certs+0x0/0x303 returned 0 after 308 usecs
[ 0.179248] calling prandom_reseed+0x0/0x2a @ 1
[ 0.179253] initcall prandom_reseed+0x0/0x2a returned 0 after 3 usecs
[ 0.179255] calling init_error_injection+0x0/0x6a @ 1
[ 0.179511] initcall init_error_injection+0x0/0x6a returned 0 after 248 usecs
[ 0.179513] calling pci_resource_alignment_sysfs_init+0x0/0x18 @ 1
[ 0.179517] initcall pci_resource_alignment_sysfs_init+0x0/0x18 returned 0 after 2 usecs
[ 0.179518] calling pci_sysfs_init+0x0/0x50 @ 1
[ 0.179816] initcall pci_sysfs_init+0x0/0x50 returned 0 after 287 usecs
[ 0.179819] calling bert_init+0x0/0x220 @ 1
[ 0.179822] initcall bert_init+0x0/0x220 returned 0 after 0 usecs
[ 0.179825] calling clk_debug_init+0x0/0x116 @ 1
[ 0.179835] initcall clk_debug_init+0x0/0x116 returned 0 after 7 usecs
[ 0.179837] calling boot_wait_for_devices+0x0/0x2b @ 1
[ 0.179839] initcall boot_wait_for_devices+0x0/0x2b returned -19 after 0 usecs
[ 0.179841] calling dmar_free_unused_resources+0x0/0xc7 @ 1
[ 0.179844] initcall dmar_free_unused_resources+0x0/0xc7 returned 0 after 0 usecs
[ 0.179847] calling deferred_probe_initcall+0x0/0x90 @ 1
[ 0.179872] initcall deferred_probe_initcall+0x0/0x90 returned 0 after 21 usecs
[ 0.179883] calling genpd_power_off_unused+0x0/0x7e @ 1
[ 0.179885] initcall genpd_power_off_unused+0x0/0x7e returned 0 after 0 usecs
[ 0.179887] calling genpd_debug_init+0x0/0x166 @ 1
[ 0.179890] initcall genpd_debug_init+0x0/0x166 returned 0 after 1 usecs
[ 0.179892] calling rtc_hctosys+0x0/0xe3 @ 1
[ 0.179923] rtc_cmos 00:01: setting system clock to 2019-12-20T10:14:12 UTC (1576836852)
[ 0.179926] initcall rtc_hctosys+0x0/0xe3 returned 0 after 31 usecs
[ 0.179927] calling firmware_memmap_init+0x0/0x33 @ 1
[ 0.179964] initcall firmware_memmap_init+0x0/0x33 returned 0 after 34 usecs
[ 0.179967] calling register_update_efi_random_seed+0x0/0x20 @ 1
[ 0.179969] initcall register_update_efi_random_seed+0x0/0x20 returned 0 after 0 usecs
[ 0.179970] calling efi_shutdown_init+0x0/0x3f @ 1
[ 0.179971] initcall efi_shutdown_init+0x0/0x3f returned 0 after 0 usecs
[ 0.179973] calling itmt_legacy_init+0x0/0x4c @ 1
[ 0.179974] initcall itmt_legacy_init+0x0/0x4c returned -19 after 0 usecs
[ 0.179976] calling pci_mmcfg_late_insert_resources+0x0/0x4c @ 1
[ 0.179979] initcall pci_mmcfg_late_insert_resources+0x0/0x4c returned 0 after 2 usecs
[ 0.179982] calling tcp_congestion_default+0x0/0x18 @ 1
[ 0.179985] initcall tcp_congestion_default+0x0/0x18 returned 0 after 0 usecs
[ 0.179986] calling software_resume+0x0/0x230 @ 1
[ 0.179988] initcall software_resume+0x0/0x230 returned -2 after 0 usecs
[ 0.179990] calling clear_boot_tracer+0x0/0x26 @ 1
[ 0.179992] initcall clear_boot_tracer+0x0/0x26 returned 0 after 0 usecs
[ 0.179994] calling tracing_set_default_clock+0x0/0x35 @ 1
[ 0.179996] initcall tracing_set_default_clock+0x0/0x35 returned 0 after 0 usecs
[ 0.179999] calling acpi_gpio_handle_deferred_request_irqs+0x0/0x90 @ 1
[ 0.180001] initcall acpi_gpio_handle_deferred_request_irqs+0x0/0x90 returned 0 after 0 usecs
[ 0.180003] calling clk_disable_unused+0x0/0x130 @ 1
[ 0.180012] initcall clk_disable_unused+0x0/0x130 returned 0 after 0 usecs
[ 0.180014] calling regulator_init_complete+0x0/0x25 @ 1
[ 0.180017] initcall regulator_init_complete+0x0/0x25 returned 0 after 0 usecs
[ 0.180995] Freeing unused kernel image memory: 1664K
[ 0.224142] Write protecting the kernel read-only data: 16384k
[ 0.225302] Freeing unused kernel image memory: 2036K
[ 0.225622] Freeing unused kernel image memory: 364K
[ 0.241029] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.241030] x86/mm: Checking user space page tables
[ 0.247234] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.247235] Run /init as init process
[ 0.309753] calling acpi_fan_driver_init+0x0/0x1000 [fan] @ 133
[ 0.309926] probe of PNP0C0B:00 returned 1 after 154 usecs
[ 0.310044] probe of PNP0C0B:01 returned 1 after 115 usecs
[ 0.310183] probe of PNP0C0B:02 returned 1 after 136 usecs
[ 0.310312] probe of PNP0C0B:03 returned 1 after 126 usecs
[ 0.310446] probe of PNP0C0B:04 returned 1 after 131 usecs
[ 0.310458] initcall acpi_fan_driver_init+0x0/0x1000 [fan] returned 0 after 684 usecs
[ 0.318439] calling serio_raw_drv_init+0x0/0x1000 [serio_raw] @ 132
[ 0.318454] initcall serio_raw_drv_init+0x0/0x1000 [serio_raw] returned 0 after 11 usecs
[ 0.321530] calling evdev_init+0x0/0x1000 [evdev] @ 137
[ 0.321559] calling init_scsi+0x0/0x83 [scsi_mod] @ 135
[ 0.321569] initcall evdev_init+0x0/0x1000 [evdev] returned 0 after 7 usecs
[ 0.321617] SCSI subsystem initialized
[ 0.321626] initcall init_scsi+0x0/0x83 [scsi_mod] returned 0 after 57 usecs
[ 0.322026] calling cryptd_init+0x0/0x1000 [cryptd] @ 134
[ 0.322072] cryptd: max_cpu_qlen set to 1000
[ 0.322076] initcall cryptd_init+0x0/0x1000 [cryptd] returned 0 after 44 usecs
[ 0.327314] calling psmouse_init+0x0/0x8b [psmouse] @ 133
[ 0.327341] initcall psmouse_init+0x0/0x8b [psmouse] returned 0 after 20 usecs
[ 0.332116] calling ata_init+0x0/0x324 [libata] @ 135
[ 0.332166] libata version 3.00 loaded.
[ 0.332177] initcall ata_init+0x0/0x324 [libata] returned 0 after 49 usecs
[ 0.337333] calling aesni_init+0x0/0x1000 [aesni_intel] @ 134
[ 0.337334] AVX2 version of gcm_enc/dec engaged.
[ 0.337335] AES CTR mode by8 optimization enabled
[ 0.338006] calling ahci_pci_driver_init+0x0/0x1000 [ahci] @ 135
[ 0.338033] ahci 0000:00:1f.2: version 3.0
[ 0.338428] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 0.352041] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl RAID mode
[ 0.352044] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo only pio slum part sxs deso sadm sds apst
[ 0.352383] scsi host0: ahci
[ 0.352528] scsi host1: ahci
[ 0.352595] ata1: SATA max UDMA/133 abar m2048@0xf7241000 port 0xf7241100 irq 44
[ 0.352597] ata2: SATA max UDMA/133 abar m2048@0xf7241000 port 0xf7241180 irq 44
[ 0.352616] probe of 0000:00:1f.2 returned 1 after 14589 usecs
[ 0.352636] initcall ahci_pci_driver_init+0x0/0x1000 [ahci] returned 0 after 14281 usecs
[ 0.360747] initcall aesni_init+0x0/0x1000 [aesni_intel] returned 0 after 22198 usecs
[ 0.361328] calling crc32c_intel_mod_init+0x0/0x1000 [crc32c_intel] @ 134
[ 0.362651] initcall crc32c_intel_mod_init+0x0/0x1000 [crc32c_intel] returned 0 after 1288 usecs
[ 0.668112] ata1: SATA link down (SStatus 0 SControl 300)
[ 0.984114] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.986578] ata2.00: NCQ Send/Recv Log not supported
[ 0.986583] ata2.00: ATA-9: SAMSUNG SSD PM851 mSATA 256GB, EXT4AD0Q, max UDMA/133
[ 0.986587] ata2.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 0.987392] ata2.00: NCQ Send/Recv Log not supported
[ 0.987447] ata2.00: configured for UDMA/133
[ 0.987752] scsi 1:0:0:0: Direct-Access ATA SAMSUNG SSD PM85 AD0Q PQ: 0 ANSI: 5
[ 0.997943] calling init_sd+0x0/0x1000 [sd_mod] @ 135
[ 0.998036] initcall init_sd+0x0/0x1000 [sd_mod] returned 0 after 77 usecs
[ 0.998264] sd 1:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[ 0.998274] sd 1:0:0:0: [sda] Write Protect is off
[ 0.998276] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.998289] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.013556] sda: sda1 sda2 sda3
[ 1.013992] sd 1:0:0:0: [sda] Attached SCSI disk
[ 1.014005] probe of 1:0:0:0 returned 1 after 15993 usecs
[ 1.059380] calling dm_init+0x0/0x4d [dm_mod] @ 193
[ 1.059413] device-mapper: uevent: version 1.0.3
[ 1.059489] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
[ 1.059499] initcall dm_init+0x0/0x4d [dm_mod] returned 0 after 106 usecs
[ 1.061353] calling dm_crypt_init+0x0/0x1000 [dm_crypt] @ 193
[ 1.061356] initcall dm_crypt_init+0x0/0x1000 [dm_crypt] returned 0 after 0 usecs
[ 1.160114] tsc: Refined TSC clocksource calibration: 2593.994 MHz
[ 1.160129] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x256412811b4, max_idle_ns: 440795306987 ns
[ 1.160180] clocksource: Switched to clocksource tsc
[ 1.416459] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input2
[ 1.419401] probe of serio1 returned 1 after 1092049 usecs
[ 4.777110] calling crc32c_mod_init+0x0/0x1000 [crc32c_generic] @ 241
[ 4.780191] initcall crc32c_mod_init+0x0/0x1000 [crc32c_generic] returned 0 after 2998 usecs
[ 4.788538] calling journal_init+0x0/0x51f [jbd2] @ 241
[ 4.788661] initcall journal_init+0x0/0x51f [jbd2] returned 0 after 112 usecs
[ 4.789412] calling mbcache_init+0x0/0x1000 [mbcache] @ 241
[ 4.789443] initcall mbcache_init+0x0/0x1000 [mbcache] returned 0 after 27 usecs
[ 4.811838] calling ext4_init_fs+0x0/0x1bd [ext4] @ 241
[ 4.812040] initcall ext4_init_fs+0x0/0x1bd [ext4] returned 0 after 177 usecs
[ 4.814776] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 4.838134] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[ 4.963280] calling init_autofs_fs+0x0/0x2a [autofs4] @ 1
[ 4.963371] initcall init_autofs_fs+0x0/0x2a [autofs4] returned 0 after 80 usecs
[ 4.963464] systemd[1]: Inserted module 'autofs4'
[ 4.969734] calling xt_init+0x0/0x1000 [x_tables] @ 1
[ 4.969739] initcall xt_init+0x0/0x1000 [x_tables] returned 0 after 1 usecs
[ 4.971772] calling ip_tables_init+0x0/0x1000 [ip_tables] @ 1
[ 4.971779] initcall ip_tables_init+0x0/0x1000 [ip_tables] returned 0 after 4 usecs
[ 4.981941] calling efivarfs_init+0x0/0x1000 [efivarfs] @ 262
[ 4.981946] initcall efivarfs_init+0x0/0x1000 [efivarfs] returned 0 after 1 usecs
[ 4.990109] systemd[1]: systemd 244-3 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 5.008215] systemd[1]: Detected architecture x86-64.
[ 5.031982] systemd[1]: Set hostname to <ersatz>.
[ 5.126102] systemd[1]: /lib/systemd/system/pcscd.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/pcscd/pcscd.comm → /run/pcscd/pcscd.comm; please update the unit file accordingly.
[ 5.159012] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
[ 5.162716] systemd[1]: Created slice system-getty.slice.
[ 5.162887] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice.
[ 5.163038] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 5.163203] systemd[1]: Created slice User and Session Slice.
[ 5.163248] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 5.163282] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 5.163463] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 5.163496] systemd[1]: Reached target User and Group Name Lookups.
[ 5.163503] systemd[1]: Reached target Remote File Systems.
[ 5.163509] systemd[1]: Reached target Slices.
[ 5.163517] systemd[1]: Reached target Swap.
[ 5.164908] systemd[1]: Listening on Process Core Dump Socket.
[ 5.165546] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 5.165588] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 5.165708] systemd[1]: Listening on Journal Audit Socket.
[ 5.165778] systemd[1]: Listening on Journal Socket (/dev/log).
[ 5.165856] systemd[1]: Listening on Journal Socket.
[ 5.165943] systemd[1]: Listening on udev Control Socket.
[ 5.166003] systemd[1]: Listening on udev Kernel Socket.
[ 5.166748] systemd[1]: Mounting Huge Pages File System...
[ 5.167497] systemd[1]: Mounting POSIX Message Queue File System...
[ 5.168271] systemd[1]: Mounting Kernel Debug File System...
[ 5.169399] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 5.169838] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 5.169882] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 5.171109] systemd[1]: Starting Journal Service...
[ 5.172666] systemd[1]: Starting Load Kernel Modules...
[ 5.173531] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 5.174431] systemd[1]: Starting udev Coldplug all Devices...
[ 5.176032] systemd[1]: Mounted Huge Pages File System.
[ 5.176168] systemd[1]: Mounted POSIX Message Queue File System.
[ 5.176295] systemd[1]: Mounted Kernel Debug File System.
[ 5.176794] systemd[1]: Started Create list of static device nodes for the current kernel.
[ 5.183416] calling pkcs8_key_init+0x0/0x1000 [pkcs8_key_parser] @ 284
[ 5.183418] Asymmetric key parser 'pkcs8' registered
[ 5.183420] initcall pkcs8_key_init+0x0/0x1000 [pkcs8_key_parser] returned 0 after 1 usecs
[ 5.184394] systemd[1]: Started Load Kernel Modules.
[ 5.185296] systemd[1]: Condition check resulted in FUSE Control File System being skipped.
[ 5.185383] systemd[1]: Condition check resulted in Kernel Configuration File System being skipped.
[ 5.185624] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 5.186169] systemd[1]: Starting Apply Kernel Variables...
[ 5.187538] systemd[1]: Started Remount Root and Kernel File Systems.
[ 5.188122] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 5.189031] systemd[1]: Starting Load/Save Random Seed...
[ 5.190058] systemd[1]: Starting Create System Users...
[ 5.196928] systemd[1]: Started Apply Kernel Variables.
[ 5.237183] systemd[1]: Started udev Coldplug all Devices.
[ 5.250479] systemd[1]: Started Load/Save Random Seed.
[ 5.277164] systemd[1]: Started Create System Users.
[ 5.277847] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 5.372098] systemd[1]: Started Create Static Device Nodes in /dev.
[ 5.372236] systemd[1]: Reached target Local File Systems (Pre).
[ 5.372272] systemd[1]: Condition check resulted in Virtual Machine and Container Storage (Compatibility) being skipped.
[ 5.372288] systemd[1]: Reached target Containers.
[ 5.373191] systemd[1]: Starting udev Kernel Device Manager...
[ 5.546270] systemd[1]: Started Journal Service.
[ 5.566876] systemd-journald[283]: Received client request to flush runtime journal.
[ 6.134588] calling acpi_ac_init+0x0/0xfdc [ac] @ 298
[ 6.134947] calling acpi_button_driver_init+0x0/0x1000 [button] @ 319
[ 6.135018] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
[ 6.135087] ACPI: Lid Switch [LID0]
[ 6.135097] probe of PNP0C0D:00 returned 1 after 122 usecs
[ 6.135128] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[ 6.135179] ACPI: Power Button [PBTN]
[ 6.135186] probe of PNP0C0C:00 returned 1 after 87 usecs
[ 6.135217] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5
[ 6.135259] ACPI: Sleep Button [SBTN]
[ 6.135267] probe of PNP0C0E:00 returned 1 after 78 usecs
[ 6.135304] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 6.135351] ACPI: Power Button [PWRF]
[ 6.135362] probe of LNXPWRBN:00 returned 1 after 88 usecs
[ 6.135370] initcall acpi_button_driver_init+0x0/0x1000 [button] returned 0 after 410 usecs
[ 6.135808] ACPI: AC Adapter [AC] (off-line)
[ 6.135818] probe of ACPI0003:00 returned 1 after 1134 usecs
[ 6.135835] initcall acpi_ac_init+0x0/0xfdc [ac] returned 0 after 863 usecs
[ 6.135839] calling acpi_battery_init+0x0/0xf5a [battery] @ 314
[ 6.135845] initcall acpi_battery_init+0x0/0xf5a [battery] returned 0 after 3 usecs
[ 6.136690] calling acpi_pad_init+0x0/0x1000 [acpi_pad] @ 311
[ 6.136734] probe of ACPI000C:00 returned 1 after 17 usecs
[ 6.136748] initcall acpi_pad_init+0x0/0x1000 [acpi_pad] returned 0 after 53 usecs
[ 6.144728] calling acpi_cpufreq_init+0x0/0x1000 [acpi_cpufreq] @ 310
[ 6.144732] initcall acpi_cpufreq_init+0x0/0x1000 [acpi_cpufreq] returned -17 after 0 usecs
[ 6.147092] calling rfkill_init+0x0/0x11a [rfkill] @ 312
[ 6.147169] initcall rfkill_init+0x0/0x11a [rfkill] returned 0 after 70 usecs
[ 6.162366] battery: ACPI: Battery Slot [BAT0] (battery present)
[ 6.162394] probe of PNP0C0A:00 returned 1 after 26487 usecs
[ 6.184375] calling acpi_cpufreq_init+0x0/0x1000 [acpi_cpufreq] @ 314
[ 6.184379] initcall acpi_cpufreq_init+0x0/0x1000 [acpi_cpufreq] returned -17 after 0 usecs
[ 6.184523] calling rbtn_driver_init+0x0/0x1000 [dell_rbtn] @ 312
[ 6.184610] input: DELL Wireless hotkeys as /devices/virtual/input/input7
[ 6.184657] probe of DELLABCE:00 returned 1 after 93 usecs
[ 6.184671] initcall rbtn_driver_init+0x0/0x1000 [dell_rbtn] returned 0 after 142 usecs
[ 6.190457] calling int3402_thermal_driver_init+0x0/0x1000 [int3402_thermal] @ 296
[ 6.192118] calling int3400_thermal_driver_init+0x0/0x1000 [int3400_thermal] @ 297
[ 6.192761] probe of INT3402:00 returned 1 after 2291 usecs
[ 6.192783] initcall int3402_thermal_driver_init+0x0/0x1000 [int3402_thermal] returned 0 after 646 usecs
[ 6.193637] ACPI Warning: \_SB.IETM._ART: Return Package type mismatch at index 0 - found Integer, expected Reference (20190816/nspredef-258)
[ 6.193642] ACPI: Invalid package element [0]: got number, expecting [R]
[ 6.193642] _ART package 0 is invalid, ignored
[ 6.193721] probe of INT3400:00 returned 1 after 1588 usecs
[ 6.193730] initcall int3400_thermal_driver_init+0x0/0x1000 [int3400_thermal] returned 0 after 1571 usecs
[ 6.200998] calling pcc_cpufreq_init+0x0/0xe81 [pcc_cpufreq] @ 310
[ 6.201002] initcall pcc_cpufreq_init+0x0/0xe81 [pcc_cpufreq] returned -17 after 0 usecs
[ 6.236648] calling acpi_cpufreq_init+0x0/0x1000 [acpi_cpufreq] @ 311
[ 6.236652] initcall acpi_cpufreq_init+0x0/0x1000 [acpi_cpufreq] returned -17 after 0 usecs
[ 6.237424] calling pps_init+0x0/0x1000 [pps_core] @ 306
[ 6.237437] pps_core: LinuxPPS API ver. 1 registered
[ 6.237437] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 6.237441] initcall pps_init+0x0/0x1000 [pps_core] returned 0 after 10 usecs
[ 6.237480] calling i2c_i801_init+0x0/0x1000 [i2c_i801] @ 304
[ 6.237646] i801_smbus 0000:00:1f.3: SPD Write Disable is set
[ 6.237671] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 6.239285] calling init_soundcore+0x0/0x1000 [soundcore] @ 318
[ 6.239295] initcall init_soundcore+0x0/0x1000 [soundcore] returned 0 after 6 usecs
[ 6.239570] calling rapl_init+0x0/0x1000 [intel_rapl_common] @ 300
[ 6.239602] initcall rapl_init+0x0/0x1000 [intel_rapl_common] returned 0 after 27 usecs
[ 6.239855] calling usb_common_init+0x0/0x22 [usb_common] @ 307
[ 6.239863] initcall usb_common_init+0x0/0x22 [usb_common] returned 0 after 5 usecs
[ 6.248234] probe of 0000:00:1f.3 returned 1 after 10739 usecs
[ 6.248256] initcall i2c_i801_init+0x0/0x1000 [i2c_i801] returned 0 after 8199 usecs
[ 6.263003] calling pcc_cpufreq_init+0x0/0xe81 [pcc_cpufreq] @ 314
[ 6.263007] initcall pcc_cpufreq_init+0x0/0xe81 [pcc_cpufreq] returned -17 after 0 usecs
[ 6.263475] calling acpi_video_init+0x0/0x1000 [video] @ 297
[ 6.263486] initcall acpi_video_init+0x0/0x1000 [video] returned 0 after 7 usecs
[ 6.265031] calling mei_init+0x0/0xb3 [mei] @ 308
[ 6.265053] initcall mei_init+0x0/0xb3 [mei] returned 0 after 14 usecs
[ 6.265475] calling ptp_init+0x0/0x1000 [ptp] @ 306
[ 6.265482] PTP clock support registered
[ 6.265485] initcall ptp_init+0x0/0x1000 [ptp] returned 0 after 6 usecs
[ 6.265911] calling proc_thermal_init+0x0/0x1000 [processor_thermal_device] @ 300
[ 6.265965] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
[ 6.273487] proc_thermal 0000:00:04.0: Creating sysfs group for PROC_THERMAL_PCI
[ 6.273511] probe of 0000:00:04.0 returned 1 after 7556 usecs
[ 6.273532] initcall proc_thermal_init+0x0/0x1000 [processor_thermal_device] returned 0 after 7437 usecs
[ 6.275044] calling lpc_ich_driver_init+0x0/0x1000 [lpc_ich] @ 302
[ 6.275157] probe of 0000:00:1f.0 returned 1 after 96 usecs
[ 6.275172] initcall lpc_ich_driver_init+0x0/0x1000 [lpc_ich] returned 0 after 121 usecs
[ 6.276532] calling alsa_sound_init+0x0/0x88 [snd] @ 318
[ 6.276548] initcall alsa_sound_init+0x0/0x88 [snd] returned 0 after 10 usecs
[ 6.310625] calling acpi_cpufreq_init+0x0/0x1000 [acpi_cpufreq] @ 319
[ 6.310629] initcall acpi_cpufreq_init+0x0/0x1000 [acpi_cpufreq] returned -17 after 0 usecs
[ 6.336500] calling pcc_cpufreq_init+0x0/0xe81 [pcc_cpufreq] @ 311
[ 6.336504] initcall pcc_cpufreq_init+0x0/0xe81 [pcc_cpufreq] returned -17 after 0 usecs
[ 6.337065] calling mei_me_driver_init+0x0/0x1000 [mei_me] @ 308
[ 6.337094] initcall mei_me_driver_init+0x0/0x1000 [mei_me] returned 0 after 25 usecs
[ 6.339144] calling int3403_driver_init+0x0/0x1000 [int3403_thermal] @ 304
[ 6.341406] calling parport_default_proc_register+0x0/0x1000 [parport] @ 301
[ 6.341425] initcall parport_default_proc_register+0x0/0x1000 [parport] returned 0 after 15 usecs
[ 6.341606] calling usb_init+0x0/0x142 [usbcore] @ 316
[ 6.341611] ACPI: bus type USB registered
[ 6.341649] usbcore: registered new interface driver usbfs
[ 6.341658] usbcore: registered new interface driver hub
[ 6.342012] usbcore: registered new device driver usb
[ 6.342027] initcall usb_init+0x0/0x142 [usbcore] returned 0 after 396 usecs
[ 6.342990] probe of INT3403:00 returned 1 after 3834 usecs
[ 6.344769] probe of 0000:00:16.0 returned 1 after 5420 usecs
[ 6.345227] probe of INT3403:01 returned 1 after 2234 usecs
[ 6.345253] initcall int3403_driver_init+0x0/0x1000 [int3403_thermal] returned 0 after 3557 usecs
[ 6.360356] calling alsa_timer_init+0x0/0x1000 [snd_timer] @ 305
[ 6.360718] calling acpi_wmi_init+0x0/0x1000 [wmi] @ 302
[ 6.360818] wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found
[ 6.360888] probe of PNP0C14:00 returned 1 after 142 usecs
[ 6.360909] initcall acpi_wmi_init+0x0/0x1000 [wmi] returned 0 after 182 usecs
[ 6.361379] calling acpi_cpufreq_init+0x0/0x1000 [acpi_cpufreq] @ 303
[ 6.361382] initcall acpi_cpufreq_init+0x0/0x1000 [acpi_cpufreq] returned -17 after 0 usecs
[ 6.361816] initcall alsa_timer_init+0x0/0x1000 [snd_timer] returned 0 after 422 usecs
[ 6.362830] calling parport_pc_init+0x0/0xf2c [parport_pc] @ 301
[ 6.362886] parport_pc 00:05: [io 0x0378-0x037b]
[ 6.364734] parport_pc 00:05: [irq 5]
[ 6.370567] parport_pc 00:05: activated
[ 6.370570] parport_pc 00:05: reported by Plug and Play ACPI
[ 6.370651] probe of 00:05 returned 0 after 7774 usecs
[ 6.370701] probe of parport_pc.956 returned 1 after 13 usecs
[ 6.370777] probe of parport_pc.888 returned 1 after 8 usecs
[ 6.370883] probe of parport_pc.632 returned 1 after 9 usecs
[ 6.370954] initcall parport_pc_init+0x0/0xf2c [parport_pc] returned 0 after 7927 usecs
[ 6.391736] calling pcc_cpufreq_init+0x0/0xe81 [pcc_cpufreq] @ 319
[ 6.391741] initcall pcc_cpufreq_init+0x0/0xe81 [pcc_cpufreq] returned -17 after 0 usecs
[ 6.391782] calling drm_core_init+0x0/0xb1 [drm] @ 317
[ 6.391814] initcall drm_core_init+0x0/0xb1 [drm] returned 0 after 13 usecs
[ 6.422357] calling acpi_cpufreq_init+0x0/0x1000 [acpi_cpufreq] @ 315
[ 6.422361] initcall acpi_cpufreq_init+0x0/0x1000 [acpi_cpufreq] returned -17 after 0 usecs
[ 6.422607] calling e1000_init_module+0x0/0x1000 [e1000e] @ 306
[ 6.422609] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 6.422609] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 6.422633] e1000e 0000:00:19.0: enabling device (0000 -> 0002)
[ 6.422818] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 6.423001] calling hwrng_modinit+0x0/0x1000 [rng_core] @ 299
[ 6.423063] initcall hwrng_modinit+0x0/0x1000 [rng_core] returned 0 after 56 usecs
[ 6.423511] calling pcspkr_platform_driver_init+0x0/0x1000 [pcspkr] @ 304
[ 6.423574] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 6.424037] probe of pcspkr returned 1 after 509 usecs
[ 6.424053] initcall pcspkr_platform_driver_init+0x0/0x1000 [pcspkr] returned 0 after 525 usecs
[ 6.430431] calling joydev_init+0x0/0x1000 [joydev] @ 308
[ 6.430437] initcall joydev_init+0x0/0x1000 [joydev] returned 0 after 2 usecs
[ 6.433378] calling cfg80211_init+0x0/0xcf [cfg80211] @ 310
[ 6.436921] initcall cfg80211_init+0x0/0xcf [cfg80211] returned 0 after 3435 usecs
[ 6.457133] calling alsa_pcm_init+0x0/0x1000 [snd_pcm] @ 318
[ 6.457143] initcall alsa_pcm_init+0x0/0x1000 [snd_pcm] returned 0 after 3 usecs
[ 6.457337] calling pcc_cpufreq_init+0x0/0xe81 [pcc_cpufreq] @ 303
[ 6.457340] initcall pcc_cpufreq_init+0x0/0xe81 [pcc_cpufreq] returned -17 after 0 usecs
[ 6.457575] calling init_sg+0x0/0x1000 [sg] @ 297
[ 6.457644] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 6.457648] initcall init_sg+0x0/0x1000 [sg] returned 0 after 67 usecs
[ 6.457897] calling ehci_hcd_init+0x0/0x1000 [ehci_hcd] @ 307
[ 6.457898] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 6.457905] initcall ehci_hcd_init+0x0/0x1000 [ehci_hcd] returned 0 after 4 usecs
[ 6.458157] calling rapl_pmu_init+0x0/0x1000 [intel_rapl_perf] @ 311
[ 6.458227] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer
[ 6.458228] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 6.458228] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 6.458229] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 6.458231] initcall rapl_pmu_init+0x0/0x1000 [intel_rapl_perf] returned 0 after 69 usecs
[ 6.474530] calling tpm_init+0x0/0xfd7 [tpm] @ 299
[ 6.474620] calling init_module+0x0/0x34 [efivars] @ 309
[ 6.474622] EFI Variables Facility v0.08 2004-May-17
[ 6.476350] calling acpi_cpufreq_init+0x0/0x1000 [acpi_cpufreq] @ 313
[ 6.476353] initcall acpi_cpufreq_init+0x0/0x1000 [acpi_cpufreq] returned -17 after 0 usecs
[ 6.476406] calling alsa_hwdep_init+0x0/0x1000 [snd_hwdep] @ 318
[ 6.476413] initcall alsa_hwdep_init+0x0/0x1000 [snd_hwdep] returned 0 after 3 usecs
[ 6.476422] calling mmc_init+0x0/0x70f [mmc_core] @ 296
[ 6.476451] initcall mmc_init+0x0/0x70f [mmc_core] returned 0 after 19 usecs
[ 6.477751] initcall tpm_init+0x0/0xfd7 [tpm] returned 0 after 1289 usecs
[ 6.478415] calling ehci_pci_init+0x0/0x1000 [ehci_pci] @ 307
[ 6.478416] ehci-pci: EHCI PCI platform driver
[ 6.478600] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 6.478605] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 6.478617] ehci-pci 0000:00:1d.0: debug port 2
[ 6.481629] initcall init_module+0x0/0x34 [efivars] returned 0 after 3132 usecs
[ 6.482547] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 6.482572] ehci-pci 0000:00:1d.0: irq 21, io mem 0xf7242000
[ 6.506054] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 6.506114] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 6.506116] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.506118] usb usb1: Product: EHCI Host Controller
[ 6.506119] usb usb1: Manufacturer: Linux 5.4.0-trunk-amd64 ehci_hcd
[ 6.506120] usb usb1: SerialNumber: 0000:00:1d.0
[ 6.506371] hub 1-0:1.0: USB hub found
[ 6.506379] hub 1-0:1.0: 2 ports detected
[ 6.506492] probe of 1-0:1.0 returned 1 after 125 usecs
[ 6.506513] probe of usb1 returned 1 after 181 usecs
[ 6.506559] probe of 0000:00:1d.0 returned 1 after 28131 usecs
[ 6.506576] initcall ehci_pci_init+0x0/0x1000 [ehci_pci] returned 0 after 27495 usecs
[ 6.508496] calling pcc_cpufreq_init+0x0/0xe81 [pcc_cpufreq] @ 315
[ 6.508500] initcall pcc_cpufreq_init+0x0/0xe81 [pcc_cpufreq] returned -17 after 0 usecs
[ 6.538861] calling acpi_cpufreq_init+0x0/0x1000 [acpi_cpufreq] @ 298
[ 6.538865] initcall acpi_cpufreq_init+0x0/0x1000 [acpi_cpufreq] returned -17 after 0 usecs
[ 6.538897] calling iwl_drv_init+0x0/0x1000 [iwlwifi] @ 310
[ 6.538899] Intel(R) Wireless WiFi driver for Linux
[ 6.538899] Copyright(c) 2003- 2015 Intel Corporation
[ 6.539995] calling sdhci_drv_init+0x0/0x1000 [sdhci] @ 296
[ 6.539996] sdhci: Secure Digital Host Controller Interface driver
[ 6.539997] sdhci: Copyright(c) Pierre Ossman
[ 6.540000] initcall sdhci_drv_init+0x0/0x1000 [sdhci] returned 0 after 1 usecs
[ 6.541314] calling intel_uncore_init+0x0/0xe25 [intel_uncore] @ 314
[ 6.541324] calling hda_bus_init+0x0/0x11 [snd_hda_core] @ 318
[ 6.541338] initcall hda_bus_init+0x0/0x11 [snd_hda_core] returned 0 after 8 usecs
[ 6.541617] calling xhci_hcd_init+0x0/0x24 [xhci_hcd] @ 316
[ 6.541629] initcall xhci_hcd_init+0x0/0x24 [xhci_hcd] returned 0 after 3 usecs
[ 6.541688] calling efivars_pstore_init+0x0/0x1000 [efi_pstore] @ 309
[ 6.541738] pstore: Using crash dump compression: deflate
[ 6.541745] pstore: Registered efi as persistent store backend
[ 6.541747] initcall efivars_pstore_init+0x0/0x1000 [efi_pstore] returned 0 after 54 usecs
[ 6.542121] probe of 0000:00:00.0 returned 1 after 774 usecs
[ 6.543483] initcall intel_uncore_init+0x0/0xe25 [intel_uncore] returned 0 after 1743 usecs
[ 6.556418] pcieport 0000:00:1c.3: Enabling MPC IRBNCE
[ 6.556423] pcieport 0000:00:1c.3: Intel PCH root port ACS workaround enabled
[ 6.557951] iwlwifi 0000:02:00.0: enabling device (0000 -> 0002)
[ 6.559039] probe of 0000:02:00.0 returned 1 after 2592 usecs
[ 6.559066] initcall iwl_drv_init+0x0/0x1000 [iwlwifi] returned 0 after 16955 usecs
[ 6.572433] calling pcc_cpufreq_init+0x0/0xe81 [pcc_cpufreq] @ 313
[ 6.572437] initcall pcc_cpufreq_init+0x0/0xe81 [pcc_cpufreq] returned -17 after 0 usecs
[ 6.575203] calling drm_kms_helper_init+0x0/0x14 [drm_kms_helper] @ 317
[ 6.575222] initcall drm_kms_helper_init+0x0/0x14 [drm_kms_helper] returned 0 after 7 usecs
[ 6.575678] calling init_tis+0x0/0x1000 [tpm_tis] @ 299
[ 6.577476] tpm_tis 00:08: 1.2 TPM (device-id 0x3205, rev-id 80)
[ 6.586887] iwlwifi 0000:02:00.0: firmware: direct-loading firmware iwlwifi-7265D-29.ucode
[ 6.587114] iwlwifi 0000:02:00.0: loaded firmware version 29.1044073957.0 op_mode iwlmvm
[ 6.600677] probe of 00:08 returned 1 after 24959 usecs
[ 6.600690] initcall init_tis+0x0/0x1000 [tpm_tis] returned 0 after 24419 usecs
[ 6.601349] calling xhci_pci_init+0x0/0x1000 [xhci_pci] @ 316
[ 6.601510] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 6.601517] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 6.602596] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x000000000004b810
[ 6.602601] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 6.602773] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 6.602775] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.602777] usb usb2: Product: xHCI Host Controller
[ 6.602778] usb usb2: Manufacturer: Linux 5.4.0-trunk-amd64 xhci-hcd
[ 6.602779] usb usb2: SerialNumber: 0000:00:14.0
[ 6.604610] hub 2-0:1.0: USB hub found
[ 6.604909] hub 2-0:1.0: 11 ports detected
[ 6.610223] probe of 2-0:1.0 returned 1 after 5617 usecs
[ 6.610251] probe of usb2 returned 1 after 5694 usecs
[ 6.610305] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 6.610308] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 6.610311] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 6.611043] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.04
[ 6.611044] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.611045] usb usb3: Product: xHCI Host Controller
[ 6.611047] usb usb3: Manufacturer: Linux 5.4.0-trunk-amd64 xhci-hcd
[ 6.611048] usb usb3: SerialNumber: 0000:00:14.0
[ 6.614949] hub 3-0:1.0: USB hub found
[ 6.614961] hub 3-0:1.0: 4 ports detected
[ 6.617376] probe of 3-0:1.0 returned 1 after 2433 usecs
[ 6.617414] probe of usb3 returned 1 after 2519 usecs
[ 6.617442] probe of 0000:00:14.0 returned 1 after 16084 usecs
[ 6.617463] initcall xhci_pci_init+0x0/0x1000 [xhci_pci] returned 0 after 15730 usecs
[ 6.624301] calling cstate_pmu_init+0x0/0x1000 [intel_cstate] @ 301
[ 6.624955] calling sdhci_driver_init+0x0/0x1000 [sdhci_pci] @ 296
[ 6.624978] sdhci-pci 0000:01:00.0: SDHCI controller found [1217:8520] (rev 1)
[ 6.627310] calling pcc_cpufreq_init+0x0/0xe81 [pcc_cpufreq] @ 298
[ 6.627313] initcall pcc_cpufreq_init+0x0/0xe81 [pcc_cpufreq] returned -17 after 0 usecs
[ 6.627668] calling i8k_init+0x0/0x1000 [dell_smm_hwmon] @ 307
[ 6.630871] initcall cstate_pmu_init+0x0/0x1000 [intel_cstate] returned 0 after 3120 usecs
[ 6.663456] initcall i8k_init+0x0/0x1000 [dell_smm_hwmon] returned 0 after 34941 usecs
[ 6.683492] mmc0: SDHCI controller on PCI [0000:01:00.0] using ADMA
[ 6.688033] probe of 0000:01:00.0 returned 1 after 63061 usecs
[ 6.688056] initcall sdhci_driver_init+0x0/0x1000 [sdhci_pci] returned 0 after 58965 usecs
[ 6.694596] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[ 6.744586] calling ghash_pclmulqdqni_mod_init+0x0/0x1000 [ghash_clmulni_intel] @ 311
[ 6.744700] calling dcdbas_init+0x0/0x1000 [dcdbas] @ 307
[ 6.744770] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.3)
[ 6.744777] probe of dcdbas returned 1 after 19 usecs
[ 6.744782] initcall dcdbas_init+0x0/0x1000 [dcdbas] returned 0 after 76 usecs
[ 6.745005] calling intel_rapl_msr_driver_init+0x0/0x1000 [intel_rapl_msr] @ 312
[ 6.745046] intel_rapl_common: Found RAPL domain package
[ 6.745048] intel_rapl_common: Found RAPL domain core
[ 6.745049] intel_rapl_common: Found RAPL domain uncore
[ 6.745052] intel_rapl_common: RAPL package-0 domain package locked by BIOS
[ 6.745748] calling dell_wmi_descriptor_driver_init+0x0/0x1000 [dell_wmi_descriptor] @ 307
[ 6.746409] calling watchdog_init+0x0/0x98 [watchdog] @ 315
[ 6.746456] initcall watchdog_init+0x0/0x98 [watchdog] returned 0 after 41 usecs
[ 6.748285] probe of 8D9DDCBC-A997-11DA-B012-B622A1EF5492 returned 1 after 2529 usecs
[ 6.748304] initcall dell_wmi_descriptor_driver_init+0x0/0x1000 [dell_wmi_descriptor] returned 0 after 1846 usecs
[ 6.751921] initcall ghash_pclmulqdqni_mod_init+0x0/0x1000 [ghash_clmulni_intel] returned 0 after 5375 usecs
[ 6.761401] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 34:e6:d7:6a:72:f4
[ 6.761403] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 6.761430] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
[ 6.761444] probe of 0000:00:19.0 returned 1 after 338823 usecs
[ 6.761472] initcall e1000_init_module+0x0/0x1000 [e1000e] returned 0 after 14698 usecs
[ 6.765344] calling crc32_pclmul_mod_init+0x0/0x1000 [crc32_pclmul] @ 311
[ 6.773222] calling wmi_bmof_driver_init+0x0/0x1000 [wmi_bmof] @ 296
[ 6.773588] calling azx_driver_init+0x0/0xfd8 [snd_hda_intel] @ 305
[ 6.773619] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002)
[ 6.773782] probe of 0000:00:03.0 returned 1 after 182 usecs
[ 6.773800] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[ 6.774052] probe of 0000:00:1b.0 returned 1 after 265 usecs
[ 6.774077] initcall azx_driver_init+0x0/0xfd8 [snd_hda_intel] returned 0 after 470 usecs
[ 6.774160] probe of intel_rapl_msr.0 returned 1 after 29141 usecs
[ 6.774179] initcall intel_rapl_msr_driver_init+0x0/0x1000 [intel_rapl_msr] returned 0 after 571 usecs
[ 6.774344] probe of 05901221-D566-11D1-B2F0-00A0C9062910 returned 1 after 1111 usecs
[ 6.774358] initcall wmi_bmof_driver_init+0x0/0x1000 [wmi_bmof] returned 0 after 748 usecs
[ 6.777074] initcall crc32_pclmul_mod_init+0x0/0x1000 [crc32_pclmul] returned 0 after 3397 usecs
[ 6.777557] calling iTCO_vendor_init_module+0x0/0x1000 [iTCO_vendor_support] @ 315
[ 6.777558] iTCO_vendor_support: vendor-support=0
[ 6.777561] initcall iTCO_vendor_init_module+0x0/0x1000 [iTCO_vendor_support] returned 0 after 0 usecs
[ 6.779038] calling ppdev_init+0x0/0x1000 [ppdev] @ 306
[ 6.779515] calling dell_smbios_init+0x0/0xf6d [dell_smbios] @ 307
[ 6.779600] probe of dell-smbios.0 returned 1 after 8 usecs
[ 6.779745] probe of A80593CE-A997-11DA-B012-B622A1EF5492 returned 1 after 128 usecs
[ 6.779799] probe of dell-smbios.1 returned 1 after 6 usecs
[ 6.780286] initcall dell_smbios_init+0x0/0xf6d [dell_smbios] returned 0 after 748 usecs
[ 6.782625] calling crct10dif_intel_mod_init+0x0/0x1000 [crct10dif_pclmul] @ 311
[ 6.786641] calling mei_wdt_driver_init+0x0/0x1000 [mei_wdt] @ 304
[ 6.790306] probe of 0000:00:16.0-05b79a6f-4628-4d7f-899d-a91514cb32ab returned 1 after 3656 usecs
[ 6.790325] initcall mei_wdt_driver_init+0x0/0x1000 [mei_wdt] returned 0 after 3593 usecs
[ 6.791494] calling i915_init+0x0/0x67 [i915] @ 317
[ 6.792256] checking generic (e0000000 410000) vs hw (e0000000 10000000)
[ 6.792258] fb0: switching to inteldrmfb from EFI VGA
[ 6.795352] Console: switching to colour dummy device 80x25
[ 6.795407] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 6.795981] [drm] ACPI BIOS requests an excessive sleep of 20000 ms, using 1500 ms instead
[ 6.799518] ppdev: user-space parallel port driver
[ 6.799526] initcall ppdev_init+0x0/0x1000 [ppdev] returned 0 after 7836 usecs
[ 6.800769] calling dell_wmi_init+0x0/0xfee [dell_wmi] @ 298
[ 6.800776] calling iTCO_wdt_init_module+0x0/0x1000 [iTCO_wdt] @ 315
[ 6.800777] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 6.800819] iTCO_wdt: Found a Wildcat Point_LP TCO device (Version=2, TCOBASE=0x1860)
[ 6.800864] input: Dell WMI hotkeys as /devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input9
[ 6.801872] probe of 9DBB5994-A997-11DA-B012-B622A1EF5492 returned 1 after 1092 usecs
[ 6.801888] initcall dell_wmi_init+0x0/0xfee [dell_wmi] returned 0 after 1081 usecs
[ 6.801986] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.801993] probe of iTCO_wdt.0.auto returned 1 after 1197 usecs
[ 6.802018] initcall iTCO_wdt_init_module+0x0/0x1000 [iTCO_wdt] returned 0 after 1206 usecs
[ 6.821235] calling ledtrig_audio_init+0x0/0x1000 [ledtrig_audio] @ 307
[ 6.821243] initcall ledtrig_audio_init+0x0/0x1000 [ledtrig_audio] returned 0 after 4 usecs
[ 6.835897] calling ieee80211_init+0x0/0x2a [mac80211] @ 333
[ 6.835924] initcall ieee80211_init+0x0/0x2a [mac80211] returned 0 after 7 usecs
[ 6.840243] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 6.841589] calling dell_init+0x0/0xc3e [dell_laptop] @ 307
[ 6.841667] probe of dell-laptop returned 1 after 11 usecs
[ 6.860420] calling generic_driver_init+0x0/0x1000 [snd_hda_codec_generic] @ 365
[ 6.860436] initcall generic_driver_init+0x0/0x1000 [snd_hda_codec_generic] returned 0 after 11 usecs
[ 6.866819] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 6.866820] [drm] Driver supports precise vblank timestamp query.
[ 6.868822] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 6.870433] dell_laptop: Using i8042 filter function for receiving events
[ 6.875109] initcall crct10dif_intel_mod_init+0x0/0x1000 [crct10dif_pclmul] returned 0 after 14336 usecs
[ 6.878794] e1000e 0000:00:19.0 eno1: renamed from eth0
[ 6.886813] calling realtek_driver_init+0x0/0x1000 [snd_hda_codec_realtek] @ 365
[ 6.887241] calling iwl_mvm_init+0x0/0x1000 [iwlmvm] @ 333
[ 6.887259] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 7265, REV=0x210
[ 6.887899] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3235: line_outs=1 (0x16/0x0/0x0/0x0/0x0) type:line
[ 6.887901] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0)
[ 6.887902] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 6.887903] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 6.887904] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 6.887906] snd_hda_codec_realtek hdaudioC1D0: Headphone Mic=0x18
[ 6.887907] snd_hda_codec_realtek hdaudioC1D0: Dock Mic=0x19
[ 6.887908] snd_hda_codec_realtek hdaudioC1D0: Headset Mic=0x1a
[ 6.887910] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x13
[ 6.921556] iwlwifi 0000:02:00.0: base HW address: 34:02:86:45:19:33
[ 6.957030] probe of hdaudioC1D0 returned 1 after 70208 usecs
[ 6.957056] initcall realtek_driver_init+0x0/0x1000 [snd_hda_codec_realtek] returned 0 after 68169 usecs
[ 6.960343] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
[ 6.960400] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
[ 6.960452] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
[ 6.960501] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
[ 6.965166] [drm] Initialized i915 1.6.0 20190822 for 0000:00:02.0 on minor 0
[ 6.975548] initcall dell_init+0x0/0xc3e [dell_laptop] returned 0 after 86228 usecs
[ 6.981285] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 6.984431] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input14
[ 6.985996] probe of LNXVIDEO:00 returned 1 after 7681 usecs
[ 6.986119] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 6.986146] probe of 0000:00:02.0 returned 1 after 194541 usecs
[ 6.986211] initcall i915_init+0x0/0x67 [i915] returned 0 after 96611 usecs
[ 6.990507] fbcon: i915drmfb (fb0) is primary device
[ 6.997027] usb 1-1: New USB device found, idVendor=8087, idProduct=8001, bcdDevice= 0.03
[ 6.997029] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 6.997348] hub 1-1:1.0: USB hub found
[ 6.997554] hub 1-1:1.0: 8 ports detected
[ 7.001251] probe of 1-1:1.0 returned 1 after 3905 usecs
[ 7.001282] probe of 1-1 returned 1 after 4171 usecs
[ 7.020679] calling vmx_init+0x0/0xe9 [kvm_intel] @ 311
[ 7.023979] initcall vmx_init+0x0/0xe9 [kvm_intel] returned 0 after 3211 usecs
[ 7.027221] iwlwifi 0000:02:00.0: RF_KILL bit toggled to disable radio.
[ 7.027223] iwlwifi 0000:02:00.0: reporting RF_KILL (radio disabled)
[ 7.031040] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 7.031260] thermal thermal_zone8: failed to read out thermal zone (-61)
[ 7.031273] initcall iwl_mvm_init+0x0/0x1000 [iwlmvm] returned 0 after 10334 usecs
[ 7.050855] calling coretemp_init+0x0/0x1000 [coretemp] @ 314
[ 7.050963] probe of coretemp.0 returned 1 after 32 usecs
[ 7.051478] initcall coretemp_init+0x0/0x1000 [coretemp] returned 0 after 603 usecs
[ 7.057677] calling hdmi_driver_init+0x0/0x1000 [snd_hda_codec_hdmi] @ 300
[ 7.060935] probe of hdaudioC0D0 returned 1 after 3250 usecs
[ 7.060956] initcall hdmi_driver_init+0x0/0x1000 [snd_hda_codec_hdmi] returned 0 after 3195 usecs
[ 7.062225] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15
[ 7.062279] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16
[ 7.062331] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17
[ 7.062380] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18
[ 7.062430] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input19
[ 7.069909] calling powerclamp_init+0x0/0x1000 [intel_powerclamp] @ 311
[ 7.073585] initcall powerclamp_init+0x0/0x1000 [intel_powerclamp] returned 0 after 3581 usecs
[ 7.084260] calling pkg_temp_thermal_init+0x0/0x1000 [x86_pkg_temp_thermal] @ 314
[ 7.085104] initcall pkg_temp_thermal_init+0x0/0x1000 [x86_pkg_temp_thermal] returned 0 after 821 usecs
[ 7.086690] calling acpi_cpufreq_init+0x0/0x1000 [acpi_cpufreq] @ 311
[ 7.086694] initcall acpi_cpufreq_init+0x0/0x1000 [acpi_cpufreq] returned -17 after 0 usecs
[ 7.120610] calling acpi_cpufreq_init+0x0/0x1000 [acpi_cpufreq] @ 314
[ 7.120615] initcall acpi_cpufreq_init+0x0/0x1000 [acpi_cpufreq] returned -17 after 0 usecs
[ 7.156831] calling acpi_cpufreq_init+0x0/0x1000 [acpi_cpufreq] @ 302
[ 7.156838] initcall acpi_cpufreq_init+0x0/0x1000 [acpi_cpufreq] returned -17 after 0 usecs
[ 7.196506] calling acpi_cpufreq_init+0x0/0x1000 [acpi_cpufreq] @ 301
[ 7.196510] initcall acpi_cpufreq_init+0x0/0x1000 [acpi_cpufreq] returned -17 after 0 usecs
[ 7.292075] usb 1-1.3: new full-speed USB device number 3 using ehci-pci
[ 7.402914] usb 1-1.3: config 1 interface 1 altsetting 0 endpoint 0x3 has wMaxPacketSize 0, skipping
[ 7.402918] usb 1-1.3: config 1 interface 1 altsetting 0 endpoint 0x83 has wMaxPacketSize 0, skipping
[ 7.402925] usb 1-1.3: New USB device found, idVendor=8087, idProduct=0a2a, bcdDevice= 0.01
[ 7.402927] usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 7.403429] probe of 1-1.3 returned 1 after 339 usecs
[ 7.473052] calling ecdh_init+0x0/0x20 [ecdh_generic] @ 303
[ 7.474819] initcall ecdh_init+0x0/0x20 [ecdh_generic] returned 0 after 1719 usecs
[ 7.480015] usb 1-1.6: new high-speed USB device number 4 using ehci-pci
[ 7.520816] calling bt_init+0x0/0xae [bluetooth] @ 303
[ 7.520818] Bluetooth: Core ver 2.22
[ 7.520830] NET: Registered protocol family 31
[ 7.520831] Bluetooth: HCI device and connection manager initialized
[ 7.520834] Bluetooth: HCI socket layer initialized
[ 7.520836] Bluetooth: L2CAP socket layer initialized
[ 7.520838] Bluetooth: SCO socket layer initialized
[ 7.520854] initcall bt_init+0x0/0xae [bluetooth] returned 0 after 22 usecs
[ 7.566920] calling btusb_driver_init+0x0/0x1000 [btusb] @ 313
[ 7.567046] probe of 1-1.3:1.0 returned 1 after 113 usecs
[ 7.567071] usbcore: registered new interface driver btusb
[ 7.567076] initcall btusb_driver_init+0x0/0x1000 [btusb] returned 0 after 146 usecs
[ 7.581880] Bluetooth: hci0: read Intel version: 370810011003110e00
[ 7.624454] bluetooth hci0: firmware: direct-loading firmware intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
[ 7.624462] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
[ 7.646612] usb 1-1.6: New USB device found, idVendor=1bcf, idProduct=28ae, bcdDevice=47.02
[ 7.646613] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 7.646614] usb 1-1.6: Product: Integrated_Webcam_HD
[ 7.646615] usb 1-1.6: Manufacturer: CN0FHKK77248753EC62HA00
[ 7.717721] probe of 1-1.6 returned 1 after 71042 usecs
[ 7.887335] calling media_devnode_init+0x0/0x1000 [mc] @ 303
[ 7.887337] mc: Linux media interface: v0.10
[ 7.887370] initcall media_devnode_init+0x0/0x1000 [mc] returned 0 after 23 usecs
[ 7.921930] calling videodev_init+0x0/0x84 [videodev] @ 303
[ 7.921931] videodev: Linux video capture interface: v2.00
[ 7.921944] initcall videodev_init+0x0/0x84 [videodev] returned 0 after 6 usecs
[ 7.930864] Bluetooth: hci0: unexpected event for opcode 0xfc2f
[ 7.947882] Bluetooth: hci0: Intel firmware patch completed and activated
[ 7.981518] calling uvc_init+0x0/0x1000 [uvcvideo] @ 303
[ 7.985257] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (1bcf:28ae)
[ 7.986914] uvcvideo: Failed to query (GET_INFO) UVC control 3 on unit 1: -32 (exp. 1).
[ 8.008591] uvcvideo 1-1.6:1.0: Entity type for entity Extension 4 was not initialized!
[ 8.008594] uvcvideo 1-1.6:1.0: Entity type for entity Extension 3 was not initialized!
[ 8.008596] uvcvideo 1-1.6:1.0: Entity type for entity Processing 2 was not initialized!
[ 8.008599] uvcvideo 1-1.6:1.0: Entity type for entity Camera 1 was not initialized!
[ 8.008719] input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input20
[ 8.008806] probe of 1-1.6:1.0 returned 1 after 27260 usecs
[ 8.008834] usbcore: registered new interface driver uvcvideo
[ 8.008835] USB Video Class driver (1.1.1)
[ 8.008848] initcall uvc_init+0x0/0x1000 [uvcvideo] returned 0 after 26676 usecs
[ 8.311084] Console: switching to colour frame buffer device 170x48
[ 8.329671] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[ 8.400631] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[ 8.400636] ext4 filesystem being mounted at /boot supports timestamps until 2038 (0x7fffffff)
[ 8.435680] calling init_fat_fs+0x0/0xfcb [fat] @ 415
[ 8.435761] initcall init_fat_fs+0x0/0xfcb [fat] returned 0 after 70 usecs
[ 8.444142] calling init_vfat_fs+0x0/0x1000 [vfat] @ 415
[ 8.444147] initcall init_vfat_fs+0x0/0x1000 [vfat] returned 0 after 2 usecs
[ 8.453474] calling init_nls_cp437+0x0/0x1000 [nls_cp437] @ 416
[ 8.453478] initcall init_nls_cp437+0x0/0x1000 [nls_cp437] returned 0 after 0 usecs
[ 8.456340] calling init_nls_ascii+0x0/0x1000 [nls_ascii] @ 417
[ 8.456345] initcall init_nls_ascii+0x0/0x1000 [nls_ascii] returned 0 after 0 usecs
[ 8.552168] calling init_misc_binfmt+0x0/0x1000 [binfmt_misc] @ 422
[ 8.552175] initcall init_misc_binfmt+0x0/0x1000 [binfmt_misc] returned 0 after 3 usecs
[ 8.738539] audit: type=1400 audit(1576836861.052:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=432 comm="apparmor_parser"
[ 8.738543] audit: type=1400 audit(1576836861.052:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=432 comm="apparmor_parser"
[ 8.738546] audit: type=1400 audit(1576836861.052:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=432 comm="apparmor_parser"
[ 8.754583] audit: type=1400 audit(1576836861.068:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=431 comm="apparmor_parser"
[ 8.755450] audit: type=1400 audit(1576836861.068:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=435 comm="apparmor_parser"
[ 8.769940] audit: type=1400 audit(1576836861.084:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=434 comm="apparmor_parser"
[ 8.769943] audit: type=1400 audit(1576836861.084:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=434 comm="apparmor_parser"
[ 8.769945] audit: type=1400 audit(1576836861.084:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=434 comm="apparmor_parser"
[ 8.781469] audit: type=1400 audit(1576836861.096:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/msmtp" pid=437 comm="apparmor_parser"
[ 8.781472] audit: type=1400 audit(1576836861.096:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/msmtp//helpers" pid=437 comm="apparmor_parser"
[ 9.023195] Process accounting resumed
[ 12.761163] rfkill: input handler disabled
[ 457.016225] usb 3-2: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[ 457.037233] usb 3-2: New USB device found, idVendor=174c, idProduct=55aa, bcdDevice= 1.00
[ 457.037238] usb 3-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 457.037242] usb 3-2: Product: ASM1351
[ 457.037244] usb 3-2: Manufacturer: Asmedia
[ 457.037247] usb 3-2: SerialNumber: 00000000000000000001
[ 457.038599] probe of 3-2 returned 1 after 1114 usecs
[ 457.064790] calling usb_storage_driver_init+0x0/0x1000 [usb_storage] @ 790
[ 457.064840] usb-storage 3-2:1.0: USB Mass Storage device detected
[ 457.065548] usb-storage 3-2:1.0: Quirks match for vid 174c pid 55aa: 400000
[ 457.065578] scsi host2: usb-storage 3-2:1.0
[ 457.065668] probe of 3-2:1.0 returned 1 after 839 usecs
[ 457.065682] usbcore: registered new interface driver usb-storage
[ 457.065692] initcall usb_storage_driver_init+0x0/0x1000 [usb_storage] returned 0 after 871 usecs
[ 457.068240] calling uas_driver_init+0x0/0x1000 [uas] @ 790
[ 457.068262] usbcore: registered new interface driver uas
[ 457.068265] initcall uas_driver_init+0x0/0x1000 [uas] returned 0 after 21 usecs
[ 458.088650] scsi 2:0:0:0: Direct-Access ASMT 2135 0 PQ: 0 ANSI: 6
[ 458.088890] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 458.128750] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 458.128774] probe of 2:0:0:0 returned 1 after 39976 usecs
[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 5174 bytes --]
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: No block device created for NVMe SSD attached to Lindy enclosure
2019-12-20 13:36 No block device created for NVMe SSD attached to Lindy enclosure Paul Menzel
@ 2019-12-20 16:04 ` Alan Stern
0 siblings, 0 replies; 2+ messages in thread
From: Alan Stern @ 2019-12-20 16:04 UTC (permalink / raw)
To: it+linux-usb; +Cc: linux-usb
On Fri, 20 Dec 2019, Paul Menzel wrote:
> Dear Linux folks,
>
>
> With Linux 5.4.2 and 5.5-rc2 (no USB_UAS selected), attaching the
> Lindy USB 3.1 M.2 / mSATA enclosure with a Samsung PM981 attached to
> the enclosure over USB 3, the Linux kernel says, a block device is
> created, but `lsblk` does not show it.
>
> This is with Debian’s Linux 5.4.2 from Debian experimental, and
> systemd 244.
This may not be a USB problem; you could try posting on the linux-scsi
or linux-block mailing lists.
> ```
> $ dmesg
> […]
> [ 457.016225] usb 3-2: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
> [ 457.037233] usb 3-2: New USB device found, idVendor=174c, idProduct=55aa, bcdDevice= 1.00
> [ 457.037238] usb 3-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
> [ 457.037242] usb 3-2: Product: ASM1351
> [ 457.037244] usb 3-2: Manufacturer: Asmedia
> [ 457.037247] usb 3-2: SerialNumber: 00000000000000000001
> [ 457.038599] probe of 3-2 returned 1 after 1114 usecs
> [ 457.064790] calling usb_storage_driver_init+0x0/0x1000 [usb_storage] @ 790
> [ 457.064840] usb-storage 3-2:1.0: USB Mass Storage device detected
> [ 457.065548] usb-storage 3-2:1.0: Quirks match for vid 174c pid 55aa: 400000
That quirk flag tells the kernel to issue READ CAPACITY(10) before READ
CAPACITY(16). It should not cause any problems.
What is the capacity of the disk in the enclosure?
> [ 457.065578] scsi host2: usb-storage 3-2:1.0
> [ 457.065668] probe of 3-2:1.0 returned 1 after 839 usecs
> [ 457.065682] usbcore: registered new interface driver usb-storage
> [ 457.065692] initcall usb_storage_driver_init+0x0/0x1000 [usb_storage] returned 0 after 871 usecs
> [ 457.068240] calling uas_driver_init+0x0/0x1000 [uas] @ 790
> [ 457.068262] usbcore: registered new interface driver uas
> [ 457.068265] initcall uas_driver_init+0x0/0x1000 [uas] returned 0 after 21 usecs
> [ 458.088650] scsi 2:0:0:0: Direct-Access ASMT 2135 0 PQ: 0 ANSI: 6
> [ 458.088890] sd 2:0:0:0: Attached scsi generic sg1 type 0
> [ 458.128750] sd 2:0:0:0: [sdb] Attached SCSI removable disk
> [ 458.128774] probe of 2:0:0:0 returned 1 after 39976 usecs
> $ lsblk --version
> lsblk from util-linux 2.34
> $ lsblk
> NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
> sda 8:0 0 238,5G 0 disk
> ├─sda1 8:1 0 128M 0 part /boot/efi
> ├─sda2 8:2 0 128M 0 part /boot
> └─sda3 8:3 0 238,2G 0 part
> └─sda3_crypt 254:0 0 238,2G 0 crypt /
> ```
>
> Do you have an idea, why the block device is not created? Is a
> special udev rule needed?
No idea. You can get more information by collecting a usbmon trace
showing what happens when the USB cable is plugged in.
Alan Stern
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2019-12-20 16:04 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-12-20 13:36 No block device created for NVMe SSD attached to Lindy enclosure Paul Menzel
2019-12-20 16:04 ` Alan Stern
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).