* [v3,3/4] usb: chipidea: host: override ehci->hub_control
@ 2018-11-30 2:43 Peter Chen
0 siblings, 0 replies; 3+ messages in thread
From: Peter Chen @ 2018-11-30 2:43 UTC (permalink / raw)
To: Schrempf Frieder, linux-usb
Cc: dl-linux-imx, robh+dt, devicetree, frieder.schrempf, festevam
> On 27.11.18 10:30, PETER CHEN wrote:
> > The chipidea controller has some special requirements during
> > suspend/resume, override common ehci->hub_control to implement it.
> >
> > Signed-off-by: Peter Chen <peter.chen@nxp.com>
>
> Tested on i.MX6S with Microchip LAN9730 USB HSIC Ethernet Controller.
> I have some minor format fixes below. Apart from that:
>
> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
> Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de>
>
> > ---
> > drivers/usb/chipidea/host.c | 76
> +++++++++++++++++++++++++++++++++++++++++++++
> > 1 file changed, 76 insertions(+)
> >
> > diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c
> > index 028a3574266a..aa4756dab487 100644
> > --- a/drivers/usb/chipidea/host.c
> > +++ b/drivers/usb/chipidea/host.c
> > @@ -220,6 +220,81 @@ void ci_hdrc_host_destroy(struct ci_hdrc *ci)
> > host_stop(ci);
> > }
> >
> > +/* The below code is based on tegra ehci driver */ static int
> > +ci_ehci_hub_control(
> > + struct usb_hcd *hcd,
> > + u16 typeReq,
> > + u16 wValue,
> > + u16 wIndex,
> > + char *buf,
> > + u16 wLength
> > +)
> > +{
> > + struct ehci_hcd *ehci = hcd_to_ehci(hcd);
> > + u32 __iomem *status_reg;
> > + u32 temp;
> > + unsigned long flags;
> > + int retval = 0;
> > + struct device *dev = hcd->self.controller;
> > + struct ci_hdrc *ci = dev_get_drvdata(dev);
> > +
> > + status_reg = &ehci->regs->port_status[(wIndex & 0xff) - 1];
> > +
> > + spin_lock_irqsave(&ehci->lock, flags);
> > +
> > + if (typeReq == SetPortFeature && wValue == USB_PORT_FEAT_SUSPEND)
> {
> > + temp = ehci_readl(ehci, status_reg);
> > + if ((temp & PORT_PE) == 0 || (temp & PORT_RESET) != 0) {
> > + retval = -EPIPE;
> > + goto done;
> > + }
> > +
> > + temp &= ~(PORT_RWC_BITS | PORT_WKCONN_E);
> > + temp |= PORT_WKDISC_E | PORT_WKOC_E;
> > + ehci_writel(ehci, temp | PORT_SUSPEND, status_reg);
> > +
> > + /*
> > + * If a transaction is in progress, there may be a delay in
> > + * suspending the port. Poll until the port is suspended.
> > + */
> > + if (ehci_handshake(ehci, status_reg, PORT_SUSPEND,
> > + PORT_SUSPEND, 5000))
>
> Indentation: ^ ^
>
> > + ehci_err(ehci, "timeout waiting for SUSPEND\n");
> > +
> > + if (ci->platdata->flags & CI_HDRC_IMX_IS_HSIC) {
> > + if (ci->platdata->notify_event)
> > + ci->platdata->notify_event
> > + (ci, CI_HDRC_IMX_HSIC_SUSPEND_EVENT);
>
> I think the open parentheses and the first parameter should be on the first line:
>
> ci->platdata->notify_event(ci,
> CI_HDRC_IMX_HSIC_SUSPEND_EVENT);
>
> > +
> > + temp = ehci_readl(ehci, status_reg);
> > + temp &= ~(PORT_WKDISC_E | PORT_WKCONN_E);
> > + ehci_writel(ehci, temp, status_reg);
> > + }
> > +
> > + set_bit((wIndex & 0xff) - 1, &ehci->suspended_ports);
> > + goto done;
> > + }
> > +
> > + /*
> > + * After resume has finished, it needs do some post resume
> > + * operation for some SoCs.
> > + */
> > + else if (typeReq == ClearPortFeature &&
> > + wValue == USB_PORT_FEAT_C_SUSPEND)
> {
>
> Indentation: ^ ^
>
Thanks, I will change these code style comments for next revision.
Peter
^ permalink raw reply [flat|nested] 3+ messages in thread
* [v3,3/4] usb: chipidea: host: override ehci->hub_control
@ 2018-11-27 13:41 Frieder Schrempf
0 siblings, 0 replies; 3+ messages in thread
From: Frieder Schrempf @ 2018-11-27 13:41 UTC (permalink / raw)
To: PETER CHEN, linux-usb
Cc: dl-linux-imx, robh+dt, devicetree, frieder.schrempf, festevam
On 27.11.18 10:30, PETER CHEN wrote:
> The chipidea controller has some special requirements during
> suspend/resume, override common ehci->hub_control to implement
> it.
>
> Signed-off-by: Peter Chen <peter.chen@nxp.com>
Tested on i.MX6S with Microchip LAN9730 USB HSIC Ethernet Controller.
I have some minor format fixes below. Apart from that:
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de>
> ---
> drivers/usb/chipidea/host.c | 76 +++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 76 insertions(+)
>
> diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c
> index 028a3574266a..aa4756dab487 100644
> --- a/drivers/usb/chipidea/host.c
> +++ b/drivers/usb/chipidea/host.c
> @@ -220,6 +220,81 @@ void ci_hdrc_host_destroy(struct ci_hdrc *ci)
> host_stop(ci);
> }
>
> +/* The below code is based on tegra ehci driver */
> +static int ci_ehci_hub_control(
> + struct usb_hcd *hcd,
> + u16 typeReq,
> + u16 wValue,
> + u16 wIndex,
> + char *buf,
> + u16 wLength
> +)
> +{
> + struct ehci_hcd *ehci = hcd_to_ehci(hcd);
> + u32 __iomem *status_reg;
> + u32 temp;
> + unsigned long flags;
> + int retval = 0;
> + struct device *dev = hcd->self.controller;
> + struct ci_hdrc *ci = dev_get_drvdata(dev);
> +
> + status_reg = &ehci->regs->port_status[(wIndex & 0xff) - 1];
> +
> + spin_lock_irqsave(&ehci->lock, flags);
> +
> + if (typeReq == SetPortFeature && wValue == USB_PORT_FEAT_SUSPEND) {
> + temp = ehci_readl(ehci, status_reg);
> + if ((temp & PORT_PE) == 0 || (temp & PORT_RESET) != 0) {
> + retval = -EPIPE;
> + goto done;
> + }
> +
> + temp &= ~(PORT_RWC_BITS | PORT_WKCONN_E);
> + temp |= PORT_WKDISC_E | PORT_WKOC_E;
> + ehci_writel(ehci, temp | PORT_SUSPEND, status_reg);
> +
> + /*
> + * If a transaction is in progress, there may be a delay in
> + * suspending the port. Poll until the port is suspended.
> + */
> + if (ehci_handshake(ehci, status_reg, PORT_SUSPEND,
> + PORT_SUSPEND, 5000))
Indentation: ^ ^
> + ehci_err(ehci, "timeout waiting for SUSPEND\n");
> +
> + if (ci->platdata->flags & CI_HDRC_IMX_IS_HSIC) {
> + if (ci->platdata->notify_event)
> + ci->platdata->notify_event
> + (ci, CI_HDRC_IMX_HSIC_SUSPEND_EVENT);
I think the open parentheses and the first parameter should be on the
first line:
ci->platdata->notify_event(ci,
CI_HDRC_IMX_HSIC_SUSPEND_EVENT);
> +
> + temp = ehci_readl(ehci, status_reg);
> + temp &= ~(PORT_WKDISC_E | PORT_WKCONN_E);
> + ehci_writel(ehci, temp, status_reg);
> + }
> +
> + set_bit((wIndex & 0xff) - 1, &ehci->suspended_ports);
> + goto done;
> + }
> +
> + /*
> + * After resume has finished, it needs do some post resume
> + * operation for some SoCs.
> + */
> + else if (typeReq == ClearPortFeature &&
> + wValue == USB_PORT_FEAT_C_SUSPEND) {
Indentation: ^ ^
> +
> + /* Make sure the resume has finished, it should be finished */
> + if (ehci_handshake(ehci, status_reg, PORT_RESUME, 0, 25000))
> + ehci_err(ehci, "timeout waiting for resume\n");
> + }
> +
> + spin_unlock_irqrestore(&ehci->lock, flags);
> +
> + /* Handle the hub control events here */
> + return ehci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength);
> +done:
> + spin_unlock_irqrestore(&ehci->lock, flags);
> + return retval;
> +}
> static int ci_ehci_bus_suspend(struct usb_hcd *hcd)
> {
> struct ehci_hcd *ehci = hcd_to_ehci(hcd);
> @@ -298,4 +373,5 @@ void ci_hdrc_host_driver_init(void)
> ehci_init_driver(&ci_ehci_hc_driver, &ehci_ci_overrides);
> orig_bus_suspend = ci_ehci_hc_driver.bus_suspend;
> ci_ehci_hc_driver.bus_suspend = ci_ehci_bus_suspend;
> + ci_ehci_hc_driver.hub_control = ci_ehci_hub_control;
> }
>
^ permalink raw reply [flat|nested] 3+ messages in thread
* [v3,3/4] usb: chipidea: host: override ehci->hub_control
@ 2018-11-27 9:30 Peter Chen
0 siblings, 0 replies; 3+ messages in thread
From: Peter Chen @ 2018-11-27 9:30 UTC (permalink / raw)
To: linux-usb
Cc: dl-linux-imx, robh+dt, devicetree, frieder.schrempf, festevam,
PETER CHEN
The chipidea controller has some special requirements during
suspend/resume, override common ehci->hub_control to implement
it.
Signed-off-by: Peter Chen <peter.chen@nxp.com>
---
drivers/usb/chipidea/host.c | 76 +++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 76 insertions(+)
diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c
index 028a3574266a..aa4756dab487 100644
--- a/drivers/usb/chipidea/host.c
+++ b/drivers/usb/chipidea/host.c
@@ -220,6 +220,81 @@ void ci_hdrc_host_destroy(struct ci_hdrc *ci)
host_stop(ci);
}
+/* The below code is based on tegra ehci driver */
+static int ci_ehci_hub_control(
+ struct usb_hcd *hcd,
+ u16 typeReq,
+ u16 wValue,
+ u16 wIndex,
+ char *buf,
+ u16 wLength
+)
+{
+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+ u32 __iomem *status_reg;
+ u32 temp;
+ unsigned long flags;
+ int retval = 0;
+ struct device *dev = hcd->self.controller;
+ struct ci_hdrc *ci = dev_get_drvdata(dev);
+
+ status_reg = &ehci->regs->port_status[(wIndex & 0xff) - 1];
+
+ spin_lock_irqsave(&ehci->lock, flags);
+
+ if (typeReq == SetPortFeature && wValue == USB_PORT_FEAT_SUSPEND) {
+ temp = ehci_readl(ehci, status_reg);
+ if ((temp & PORT_PE) == 0 || (temp & PORT_RESET) != 0) {
+ retval = -EPIPE;
+ goto done;
+ }
+
+ temp &= ~(PORT_RWC_BITS | PORT_WKCONN_E);
+ temp |= PORT_WKDISC_E | PORT_WKOC_E;
+ ehci_writel(ehci, temp | PORT_SUSPEND, status_reg);
+
+ /*
+ * If a transaction is in progress, there may be a delay in
+ * suspending the port. Poll until the port is suspended.
+ */
+ if (ehci_handshake(ehci, status_reg, PORT_SUSPEND,
+ PORT_SUSPEND, 5000))
+ ehci_err(ehci, "timeout waiting for SUSPEND\n");
+
+ if (ci->platdata->flags & CI_HDRC_IMX_IS_HSIC) {
+ if (ci->platdata->notify_event)
+ ci->platdata->notify_event
+ (ci, CI_HDRC_IMX_HSIC_SUSPEND_EVENT);
+
+ temp = ehci_readl(ehci, status_reg);
+ temp &= ~(PORT_WKDISC_E | PORT_WKCONN_E);
+ ehci_writel(ehci, temp, status_reg);
+ }
+
+ set_bit((wIndex & 0xff) - 1, &ehci->suspended_ports);
+ goto done;
+ }
+
+ /*
+ * After resume has finished, it needs do some post resume
+ * operation for some SoCs.
+ */
+ else if (typeReq == ClearPortFeature &&
+ wValue == USB_PORT_FEAT_C_SUSPEND) {
+
+ /* Make sure the resume has finished, it should be finished */
+ if (ehci_handshake(ehci, status_reg, PORT_RESUME, 0, 25000))
+ ehci_err(ehci, "timeout waiting for resume\n");
+ }
+
+ spin_unlock_irqrestore(&ehci->lock, flags);
+
+ /* Handle the hub control events here */
+ return ehci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength);
+done:
+ spin_unlock_irqrestore(&ehci->lock, flags);
+ return retval;
+}
static int ci_ehci_bus_suspend(struct usb_hcd *hcd)
{
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
@@ -298,4 +373,5 @@ void ci_hdrc_host_driver_init(void)
ehci_init_driver(&ci_ehci_hc_driver, &ehci_ci_overrides);
orig_bus_suspend = ci_ehci_hc_driver.bus_suspend;
ci_ehci_hc_driver.bus_suspend = ci_ehci_bus_suspend;
+ ci_ehci_hc_driver.hub_control = ci_ehci_hub_control;
}
^ permalink raw reply related [flat|nested] 3+ messages in thread
end of thread, other threads:[~2018-11-30 2:43 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-11-30 2:43 [v3,3/4] usb: chipidea: host: override ehci->hub_control Peter Chen
-- strict thread matches above, loose matches on Subject: below --
2018-11-27 13:41 Frieder Schrempf
2018-11-27 9:30 Peter Chen
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).