[PATCH V1 0/2] Revert device tree changes for EUD

[PATCH V1 0/2] Revert device tree changes for EUD

[Souradeep Chowdhury]

Revert the device tree changes for Embedded USB Debugger(EUD)
from the usb tree to avoid conflicts as device tree changes
for EUD are supposed to go from qcom Tree.

Souradeep Chowdhury (2):
  Revert "arm64: dts: qcom: sc7280: Set the default dr_mode for usb2"
  Revert "arm64: dts: qcom: sc7280: Add EUD dt node and dwc3 connector"

 arch/arm64/boot/dts/qcom/sc7280-idp.dts |  4 ----
 arch/arm64/boot/dts/qcom/sc7280.dtsi    | 36 ---------------------------------
 2 files changed, 40 deletions(-)

--
2.7.4

[PATCH V1 1/2] Revert "arm64: dts: qcom: sc7280: Set the default dr_mode for usb2"

[Souradeep Chowdhury]

Revert the change to set the dr_mode for usb2 in case
of Embedded USB Debugger(EUD).
---
 arch/arm64/boot/dts/qcom/sc7280-idp.dts | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dts b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
index f40eaa5..9b991ba 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
@@ -61,10 +61,6 @@
 	modem-init;
 };

-&usb_2_dwc3 {
-	dr_mode = "otg";
-};
-
 &pmk8350_rtc {
 	status = "okay";
 };
--
2.7.4

[PATCH V1 2/2] Revert "arm64: dts: qcom: sc7280: Add EUD dt node and dwc3 connector"

[Souradeep Chowdhury]

Revert all the changes to add the Embedded USB Debugger(EUD) Node
in the device tree, the connector node and also changes to usb2 Node
associated with this.
---
 arch/arm64/boot/dts/qcom/sc7280.dtsi | 36 ------------------------------------
 1 file changed, 36 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 96917fe..937c2e0 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -2583,12 +2583,6 @@
 				phys = <&usb_2_hsphy>;
 				phy-names = "usb2-phy";
 				maximum-speed = "high-speed";
-				usb-role-switch;
-				port {
-					usb2_role_switch: endpoint {
-						remote-endpoint = <&eud_ep>;
-					};
-				};
 			};
 		};
 
@@ -2630,36 +2624,6 @@
 			interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
-		eud: eud@88e0000 {
-			compatible = "qcom,sc7280-eud","qcom,eud";
-			reg = <0 0x88e0000 0 0x2000>,
-			      <0 0x88e2000 0 0x1000>;
-			interrupts-extended = <&pdc 11 IRQ_TYPE_LEVEL_HIGH>;
-			ports {
-				port@0 {
-					eud_ep: endpoint {
-						remote-endpoint = <&usb2_role_switch>;
-					};
-				};
-				port@1 {
-					eud_con: endpoint {
-						remote-endpoint = <&con_eud>;
-					};
-				};
-			};
-		};
-
-		eud_typec: connector {
-			compatible = "usb-c-connector";
-			ports {
-				port@0 {
-					con_eud: endpoint {
-						remote-endpoint = <&eud_con>;
-					};
-				};
-			};
-		};
-
 		nsp_noc: interconnect@a0c0000 {
 			reg = <0 0x0a0c0000 0 0x10000>;
 			compatible = "qcom,sc7280-nsp-noc";
-- 
2.7.4

Re: [PATCH V1 1/2] Revert "arm64: dts: qcom: sc7280: Set the default dr_mode for usb2"

[Greg KH]

On Fri, Feb 18, 2022 at 01:21:35PM +0530, Souradeep Chowdhury wrote:
> Revert the change to set the dr_mode for usb2 in case
> of Embedded USB Debugger(EUD).
> ---
>  arch/arm64/boot/dts/qcom/sc7280-idp.dts | 4 ----
>  1 file changed, 4 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dts b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
> index f40eaa5..9b991ba 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dts
> +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
> @@ -61,10 +61,6 @@
>  	modem-init;
>  };
> 
> -&usb_2_dwc3 {
> -	dr_mode = "otg";
> -};
> -
>  &pmk8350_rtc {
>  	status = "okay";
>  };
> --
> 2.7.4
> 

Hi,

This is the friendly patch-bot of Greg Kroah-Hartman.  You have sent him
a patch that has triggered this response.  He used to manually respond
to these common problems, but in order to save his sanity (he kept
writing the same thing over and over, yet to different people), I was
created.  Hopefully you will not take offence and will fix the problem
in your patch and resubmit it so that it can be accepted into the Linux
kernel tree.

You are receiving this message because of the following common error(s)
as indicated below:

- Your patch does not have a Signed-off-by: line.  Please read the
  kernel file, Documentation/SubmittingPatches and resend it after
  adding that line.  Note, the line needs to be in the body of the
  email, before the patch, not at the bottom of the patch or in the
  email signature.

If you wish to discuss this problem further, or you have questions about
how to resolve this issue, please feel free to respond to this email and
Greg will reply once he has dug out from the pending patches received
from other developers.

thanks,

greg k-h's patch email bot

Re: [PATCH V1 2/2] Revert "arm64: dts: qcom: sc7280: Add EUD dt node and dwc3 connector"

[Greg KH]

On Fri, Feb 18, 2022 at 01:21:36PM +0530, Souradeep Chowdhury wrote:
> Revert all the changes to add the Embedded USB Debugger(EUD) Node
> in the device tree, the connector node and also changes to usb2 Node
> associated with this.
> ---
>  arch/arm64/boot/dts/qcom/sc7280.dtsi | 36 ------------------------------------
>  1 file changed, 36 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> index 96917fe..937c2e0 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> @@ -2583,12 +2583,6 @@
>  				phys = <&usb_2_hsphy>;
>  				phy-names = "usb2-phy";
>  				maximum-speed = "high-speed";
> -				usb-role-switch;
> -				port {
> -					usb2_role_switch: endpoint {
> -						remote-endpoint = <&eud_ep>;
> -					};
> -				};
>  			};
>  		};
>  
> @@ -2630,36 +2624,6 @@
>  			interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
>  		};
>  
> -		eud: eud@88e0000 {
> -			compatible = "qcom,sc7280-eud","qcom,eud";
> -			reg = <0 0x88e0000 0 0x2000>,
> -			      <0 0x88e2000 0 0x1000>;
> -			interrupts-extended = <&pdc 11 IRQ_TYPE_LEVEL_HIGH>;
> -			ports {
> -				port@0 {
> -					eud_ep: endpoint {
> -						remote-endpoint = <&usb2_role_switch>;
> -					};
> -				};
> -				port@1 {
> -					eud_con: endpoint {
> -						remote-endpoint = <&con_eud>;
> -					};
> -				};
> -			};
> -		};
> -
> -		eud_typec: connector {
> -			compatible = "usb-c-connector";
> -			ports {
> -				port@0 {
> -					con_eud: endpoint {
> -						remote-endpoint = <&eud_con>;
> -					};
> -				};
> -			};
> -		};
> -
>  		nsp_noc: interconnect@a0c0000 {
>  			reg = <0 0x0a0c0000 0 0x10000>;
>  			compatible = "qcom,sc7280-nsp-noc";
> -- 
> 2.7.4
> 

Hi,

This is the friendly patch-bot of Greg Kroah-Hartman.  You have sent him
a patch that has triggered this response.  He used to manually respond
to these common problems, but in order to save his sanity (he kept
writing the same thing over and over, yet to different people), I was
created.  Hopefully you will not take offence and will fix the problem
in your patch and resubmit it so that it can be accepted into the Linux
kernel tree.

You are receiving this message because of the following common error(s)
as indicated below:

- Your patch does not have a Signed-off-by: line.  Please read the
  kernel file, Documentation/SubmittingPatches and resend it after
  adding that line.  Note, the line needs to be in the body of the
  email, before the patch, not at the bottom of the patch or in the
  email signature.

If you wish to discuss this problem further, or you have questions about
how to resolve this issue, please feel free to respond to this email and
Greg will reply once he has dug out from the pending patches received
from other developers.

thanks,

greg k-h's patch email bot

Re: [PATCH V1 1/2] Revert "arm64: dts: qcom: sc7280: Set the default dr_mode for usb2"

[Greg KH]

On Fri, Feb 18, 2022 at 01:21:35PM +0530, Souradeep Chowdhury wrote:
> Revert the change to set the dr_mode for usb2 in case
> of Embedded USB Debugger(EUD).
> ---
>  arch/arm64/boot/dts/qcom/sc7280-idp.dts | 4 ----
>  1 file changed, 4 deletions(-)

Also, please use the normal format for reverting a change with the git
id and the like.  This is an odd style :(

greg k-h