Linux-Watchdog Archive on lore.kernel.org
 help / Atom feed
[RFC PATCH v1 00/13] support ROHM BD70528 PMIC
 2019-01-24 10:44 UTC  (28+ messages) - mbox.gz / Atom
` [RFC PATCH v1 01/13] regmap: regmap-irq: Add main status register support
` [RFC PATCH v1 02/13] mfd: bd718x7.h split to ROHM common and bd718x7 specific parts
` [RFC PATCH v1 03/13] regulator: bd718x7 use chip specific and generic data structs
` [RFC PATCH v1 04/13] clk: bd718x7: "
` [RFC PATCH v1 05/13] mfd: bd70528: Support ROHM bd70528 PMIC - core
` [RFC PATCH v1 06/13] clk: bd718x7: Support ROHM BD70528 clk block
` [RFC PATCH v1 07/13] devicetree: bindings: Document first ROHM BD70528 bindings
` [RFC PATCH v1 08/13] regulator: bd70528: Support ROHM BD70528 regulator block
` [RFC PATCH v1 09/13] devicetree: bindings: ROHM bd70528 regulator bindings
` [RFC PATCH v1 10/13] gpio: Initial support for ROHM bd70528 GPIO block
` [RFC PATCH v1 11/13] rtc: bd70528: Initial support for ROHM bd70528 RTC
` [RFC PATCH v1 12/13] power: supply: Initial support for ROHM BD70528 PMIC charger block
` [RFC PATCH v1 13/13] watchdog: bd70528: Initial support for ROHM BD70528 watchdog block

[PATCH -next] watchdog: pika_wdt: drop pointless static qualifier in pikawdt_init
 2019-01-23 18:05 UTC  (2+ messages) - mbox.gz / Atom

[PATCH v8 00/26] Ingenic TCU patchset v8
 2019-01-23 18:01 UTC  (35+ messages) - mbox.gz / Atom
` [PATCH v8 01/26] dt-bindings: ingenic: Add DT bindings for TCU clocks
` [PATCH v8 03/26] dt-bindings: Add doc for the Ingenic TCU drivers
` [PATCH v8 05/26] clocksource: Add driver for the Ingenic JZ47xx OST
` [PATCH v8 11/26] pwm: jz4740: Use regmap and clocks from TCU driver
` [PATCH v8 12/26] pwm: jz4740: Allow selection of PWM channels 0 and 1
` [PATCH v8 15/26] pwm: jz4740: Add support for the JZ4725B

[PATCH v8 0/3] watchdog: allow setting deadline for opening /dev/watchdogN
 2019-01-22 17:29 UTC  (11+ messages) - mbox.gz / Atom
` [PATCH v8 1/3] watchdog: introduce watchdog.open_timeout commandline parameter
` [PATCH v8 2/3] watchdog: introduce CONFIG_WATCHDOG_OPEN_TIMEOUT
` [PATCH v8 3/3] watchdog: make the device time out at open_deadline when open_timeout is used
` [PATCH v9 0/3] watchdog: allow setting deadline for opening /dev/watchdogN
  ` [PATCH v9 1/3] watchdog: introduce watchdog.open_timeout commandline parameter
  ` [PATCH v9 2/3] watchdog: introduce CONFIG_WATCHDOG_OPEN_TIMEOUT
  ` [PATCH v9 3/3] watchdog: make the device time out at open_deadline when open_timeout is used

[PATCH] dt-bindings: watchdog: renesas-wdt: Document r8a77470 support
 2019-01-21 17:20 UTC  (4+ messages) - mbox.gz / Atom

[GIT PULL REQUEST] watchdog - v5.0-rc Fixes
 2019-01-19 22:35 UTC  (2+ messages) - mbox.gz / Atom

[PATCHv2] watchdog: qcom: Add suspend/resume support
 2019-01-18  4:25 UTC  (10+ messages) - mbox.gz / Atom

[PATCH] watchdog: qcom: Add suspend/resume support
 2019-01-17 15:07 UTC  (7+ messages) - mbox.gz / Atom

[PATCH RESEND v8 0/6] Introduce STPMIC1 PMIC Driver
 2019-01-16 14:04 UTC  (8+ messages) - mbox.gz / Atom
` [PATCH RESEND v8 1/6] dt-bindings: mfd: document stpmic1
` [PATCH RESEND v8 2/6] mfd: stpmic1: add stpmic1 driver
` [PATCH RESEND v8 3/6] dt-bindings: input: document stpmic1 pmic onkey
` [PATCH RESEND v8 5/6] dt-bindings: watchdog: document stpmic1 pmic watchdog
` [PATCH RESEND v8 4/6] input: stpmic1: add stpmic1 onkey driver
` [PATCH RESEND v8 6/6] watchdog: stpmic1: add stpmic1 watchdog driver
` [GIT PULL] Immutable branch between MFD, Input and Watchdog due for the v5.1 merge window

[PATCH v7 0/7] Introduce STPMIC1 PMIC Driver
 2019-01-16  8:13 UTC  (5+ messages) - mbox.gz / Atom

[RFC PATCH 0/4] watchdog: hpwdt: Fix NMI-related behaviour when CONFIG_HPWDT_NMI_DECODING is enabled
 2019-01-16  2:52 UTC  (9+ messages) - mbox.gz / Atom
` [RFC PATCH 1/4] watchdog: hpwdt: Don't disable watchdog on NMI
` [RFC PATCH 2/4] watchdog: hpwdt: Don't panic on foreign NMI
` [RFC PATCH 3/4] watchdog: hpwdt: Add more information into message
` [RFC PATCH 4/4] watchdog: hpwdt: Make panic behaviour configurable

[PATCH] watchdog: mt7621: Fix compiler error, missing include
 2019-01-15 15:29 UTC  (2+ messages) - mbox.gz / Atom

[PATCH v9 00/27] Ingenic TCU patchset v9
 2019-01-10 14:04 UTC  (39+ messages) - mbox.gz / Atom
` [PATCH v9 01/27] dt-bindings: ingenic: Add DT bindings for TCU clocks
` [PATCH v9 02/27] doc: Add doc for the Ingenic TCU hardware
` [PATCH v9 03/27] dt-bindings: Add doc for the Ingenic TCU drivers
` [PATCH v9 04/27] clocksource: Add a new timer-ingenic driver
` [PATCH v9 05/27] clocksource: Add driver for the Ingenic JZ47xx OST
` [PATCH v9 06/27] MAINTAINERS: Add myself as maintainer for Ingenic TCU drivers
` [PATCH v9 07/27] watchdog: jz4740: Use WDT clock provided by TCU driver
` [PATCH v9 08/27] watchdog: jz4740: Use regmap "
` [PATCH v9 09/27] watchdog: jz4740: Avoid starting watchdog in set_timeout
` [PATCH v9 10/27] watchdog: jz4740: Drop dependency on MACH_JZ47xx, use COMPILE_TEST
` [PATCH v9 11/27] pwm: jz4740: Apply configuration atomically
` [PATCH v9 12/27] pwm: jz4740: Use regmap from TCU driver
` [PATCH v9 13/27] pwm: jz4740: Use clocks "
` [PATCH v9 14/27] pwm: jz4740: Improve algorithm of clock calculation
` [PATCH v9 15/27] pwm: jz4740: Allow selection of PWM channels 0 and 1
` [PATCH v9 16/27] pwm: jz4740: Drop dependency on MACH_INGENIC, use COMPILE_TEST
` [PATCH v9 17/27] pwm: jz4740: Remove unused devicetree compatible strings
` [PATCH v9 18/27] clk: jz4740: Add TCU clock
` [PATCH v9 19/27] MIPS: Kconfig: Select TCU timer driver when MACH_INGENIC is set
` [PATCH v9 20/27] MIPS: jz4740: Add DTS nodes for the TCU drivers
` [PATCH v9 21/27] MIPS: qi_lb60: Move PWM devices to devicetree
` [PATCH v9 22/27] MIPS: qi_lb60: Reduce system timer and clocksource to 750 kHz
` [PATCH v9 23/27] MIPS: CI20: Reduce system timer to 3 MHz
` [PATCH v9 24/27] MIPS: CI20: defconfig: enable OST driver
` [PATCH v9 25/27] MIPS: GCW0: Reduce system timer to 750 kHz
` [PATCH v9 26/27] MIPS: GCW0: defconfig: Enable OST, watchdog, PWM drivers
` [PATCH v9 27/27] MIPS: jz4740: Drop obsolete code

[PATCH v4 0/5] BCM2835 PM driver
 2019-01-09 19:00 UTC  (5+ messages) - mbox.gz / Atom
` [PATCH v4 3/5] soc: bcm: bcm2835-pm: Add support for power domains under a new binding
` [PATCH v4 5/5] ARM: bcm283x: Switch V3D over to using the PM driver instead of firmware

[PATCH] watchdog: wm831x: Use GPIO descriptor
 2019-01-05  1:45 UTC  (2+ messages) - mbox.gz / Atom

[PATCH] watchdog: tqmx86: Fix a couple IS_ERR() vs NULL bugs
 2019-01-04 13:52 UTC  (3+ messages) - mbox.gz / Atom

[GIT PULL REQUEST] watchdog - v4.21 Merge window
 2019-01-01 21:40 UTC  (2+ messages) - mbox.gz / Atom

[PATCH] Fix compilation problem for mt7621_wdt.c and rt2880_wdt.c
 2018-12-30 17:16 UTC  (2+ messages) - mbox.gz / Atom

[PATCH v4] watchdog: mtx-1: Convert to use GPIO descriptor
 2018-12-23 15:26 UTC  (4+ messages) - mbox.gz / Atom

[PATCH v3] watchdog: mtx-1: Convert to use GPIO descriptor
 2018-12-22 10:09 UTC  (6+ messages) - mbox.gz / Atom
` [v3] "

[PATCH] dt-bindings: watchdog: renesas-wdt: Document r8a774c0 support
 2018-12-20 20:35 UTC  (5+ messages) - mbox.gz / Atom
`  "

[PATCH v4] watchdog: tqmx86: Add watchdog driver for the IO controller
 2018-12-19 17:18 UTC  (4+ messages) - mbox.gz / Atom

[PATCH v3] watchdog: tqmx86: Add watchdog driver for the IO controller
 2018-12-19  9:25 UTC  (2+ messages) - mbox.gz / Atom

[PATCH v3] watchdog: tqmx86: Add watchdog driver for the IO controller
 2018-12-18 16:34 UTC  - mbox.gz / Atom

[PATCH] watchdog: add documentation for PM usage
 2018-12-18  7:48 UTC  (3+ messages) - mbox.gz / Atom

[PATCH] watchdog: docs: kernel-api: don't reference removed functions
 2018-12-17 20:07 UTC  (2+ messages) - mbox.gz / Atom

[PATCH] dt-bindings: watchdog: update bindings for MT7629 SoC
 2018-12-17  4:15 UTC  (6+ messages) - mbox.gz / Atom
`  "

[PATCH] watchdog: mena21_wdt: Convert to GPIO descriptors
 2018-12-15 16:28 UTC  (2+ messages) - mbox.gz / Atom
`  "

[PATCH v3 3/3] arm64: dts: qcom: pm8916: Add PON watchdog node
 2018-12-15 16:27 UTC  (2+ messages) - mbox.gz / Atom
` [v3,3/3] "

[PATCH v3 2/3] dt-bindings: watchdog: Add Qualcomm PM8916 watchdog
 2018-12-15 16:26 UTC  (2+ messages) - mbox.gz / Atom
` [v3,2/3] "

page: 

Linux-Watchdog Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-watchdog/0 linux-watchdog/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-watchdog linux-watchdog/ https://lore.kernel.org/linux-watchdog \
		linux-watchdog@vger.kernel.org linux-watchdog@archiver.kernel.org
	public-inbox-index linux-watchdog


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-watchdog


AGPL code for this site: git clone https://public-inbox.org/ public-inbox