[PATCH v7 0/9] Turris Omnia MCU driver

[PATCH v7 0/9] Turris Omnia MCU driver

[Marek Behún]

Hello Andy, Hans, Ilpo, Arnd, Gregory, and others,

this is v7 of the series adding Turris Omnia MCU driver.

This series depends on the immutable branch between LEDs and locking,
introducing devm_mutex_init(), see the PR
  https://lore.kernel.org/linux-leds/20240412084616.GR2399047@google.com/

See also cover letters for v1, v2, v3, v4, v5 and v6:
  https://patchwork.kernel.org/project/linux-soc/cover/20230823161012.6986-1-kabel@kernel.org/
  https://patchwork.kernel.org/project/linux-soc/cover/20230919103815.16818-1-kabel@kernel.org/
  https://patchwork.kernel.org/project/linux-soc/cover/20231023143130.11602-1-kabel@kernel.org/
  https://patchwork.kernel.org/project/linux-soc/cover/20231026161803.16750-1-kabel@kernel.org/
  https://patchwork.kernel.org/project/linux-soc/cover/20240323164359.21642-1-kabel@kernel.org/
  https://patchwork.kernel.org/project/linux-soc/cover/20240418121116.22184-1-kabel@kernel.org/

Changes since v6:
- moved the DT binding from arm/cznic,turris-omnia-mcu.yaml to
  firmware/cznic,turris-omnia-mcu.yaml, as suggested by Conor Dooley
  (patch 1)
- dropped the devm-helpers.h additions, for the reasons see
  https://lore.kernel.org/soc/20240423184346.37eb0915@thinkpad/
- use gpiod_to_irq(gpiochip_get_desc(...)) instead of
  irq_create_mapping(), as suggested by Andy Shevchenko (patches 6 and
  7)
- added a dummy read of TRNG entropy when registering TRNG, in case
  someone cleared the TRNG interrupt before probing the driver, but did
  not read the entropy (the MCU won't send a new TRNG interrupt if the
  entropy is not collected) (patch 6)
- fixed a bug in TRNG probing, wherein if the 

Marek Behún (9):
  dt-bindings: arm: add cznic,turris-omnia-mcu binding
  platform: cznic: Add preliminary support for Turris Omnia MCU
  platform: cznic: turris-omnia-mcu: Add support for MCU connected GPIOs
  platform: cznic: turris-omnia-mcu: Add support for poweroff and wakeup
  platform: cznic: turris-omnia-mcu: Add support for MCU watchdog
  platform: cznic: turris-omnia-mcu: Add support for MCU provided TRNG
  platform: cznic: turris-omnia-mcu: Add support for digital message
    signing via debugfs
  ARM: dts: turris-omnia: Add MCU system-controller node
  ARM: dts: turris-omnia: Add GPIO key node for front button

 .../ABI/testing/debugfs-turris-omnia-mcu      |   13 +
 .../sysfs-bus-i2c-devices-turris-omnia-mcu    |  126 ++
 .../firmware/cznic,turris-omnia-mcu.yaml      |   86 ++
 MAINTAINERS                                   |    5 +
 .../dts/marvell/armada-385-turris-omnia.dts   |   35 +-
 drivers/platform/Kconfig                      |    2 +
 drivers/platform/Makefile                     |    1 +
 drivers/platform/cznic/Kconfig                |   51 +
 drivers/platform/cznic/Makefile               |    9 +
 .../platform/cznic/turris-omnia-mcu-base.c    |  439 +++++++
 .../platform/cznic/turris-omnia-mcu-debugfs.c |  216 ++++
 .../platform/cznic/turris-omnia-mcu-gpio.c    | 1047 +++++++++++++++++
 .../cznic/turris-omnia-mcu-sys-off-wakeup.c   |  258 ++++
 .../platform/cznic/turris-omnia-mcu-trng.c    |  109 ++
 .../cznic/turris-omnia-mcu-watchdog.c         |  123 ++
 drivers/platform/cznic/turris-omnia-mcu.h     |  188 +++
 include/linux/turris-omnia-mcu-interface.h    |  249 ++++
 17 files changed, 2956 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/ABI/testing/debugfs-turris-omnia-mcu
 create mode 100644 Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu
 create mode 100644 Documentation/devicetree/bindings/firmware/cznic,turris-omnia-mcu.yaml
 create mode 100644 drivers/platform/cznic/Kconfig
 create mode 100644 drivers/platform/cznic/Makefile
 create mode 100644 drivers/platform/cznic/turris-omnia-mcu-base.c
 create mode 100644 drivers/platform/cznic/turris-omnia-mcu-debugfs.c
 create mode 100644 drivers/platform/cznic/turris-omnia-mcu-gpio.c
 create mode 100644 drivers/platform/cznic/turris-omnia-mcu-sys-off-wakeup.c
 create mode 100644 drivers/platform/cznic/turris-omnia-mcu-trng.c
 create mode 100644 drivers/platform/cznic/turris-omnia-mcu-watchdog.c
 create mode 100644 drivers/platform/cznic/turris-omnia-mcu.h
 create mode 100644 include/linux/turris-omnia-mcu-interface.h

-- 
2.43.2

[PATCH v7 2/9] platform: cznic: Add preliminary support for Turris Omnia MCU

[Marek Behún]

Add the basic skeleton for a new platform driver for the microcontroller
found on the Turris Omnia board.

Signed-off-by: Marek Behún <kabel@kernel.org>
---
 .../sysfs-bus-i2c-devices-turris-omnia-mcu    |  81 ++++
 MAINTAINERS                                   |   3 +
 drivers/platform/Kconfig                      |   2 +
 drivers/platform/Makefile                     |   1 +
 drivers/platform/cznic/Kconfig                |  26 ++
 drivers/platform/cznic/Makefile               |   4 +
 .../platform/cznic/turris-omnia-mcu-base.c    | 376 ++++++++++++++++++
 drivers/platform/cznic/turris-omnia-mcu.h     |  50 +++
 include/linux/turris-omnia-mcu-interface.h    | 249 ++++++++++++
 9 files changed, 792 insertions(+)
 create mode 100644 Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu
 create mode 100644 drivers/platform/cznic/Kconfig
 create mode 100644 drivers/platform/cznic/Makefile
 create mode 100644 drivers/platform/cznic/turris-omnia-mcu-base.c
 create mode 100644 drivers/platform/cznic/turris-omnia-mcu.h
 create mode 100644 include/linux/turris-omnia-mcu-interface.h

diff --git a/Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu b/Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu
new file mode 100644
index 000000000000..ff5e7cb00206
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu
@@ -0,0 +1,81 @@
+What:		/sys/bus/i2c/devices/<mcu_device>/board_revision
+Date:		July 2024
+KernelVersion:	6.10
+Contact:	Marek Behún <kabel@kernel.org>
+Description:	(RO) Contains board revision number.
+
+		Only available if board information is burned in the MCU (older
+		revisions have board information burned in the ATSHA204-A chip).
+
+		Format: %u.
+
+What:		/sys/bus/i2c/devices/<mcu_device>/first_mac_address
+Date:		July 2024
+KernelVersion:	6.10
+Contact:	Marek Behún <kabel@kernel.org>
+Description:	(RO) Contains device first MAC address. Each Turris Omnia is
+		allocated 3 MAC addresses. The two additional addresses are
+		computed from the first one by incrementing it.
+
+		Only available if board information is burned in the MCU (older
+		revisions have board information burned in the ATSHA204-A chip).
+
+		Format: %pM.
+
+What:		/sys/bus/i2c/devices/<mcu_device>/fw_features
+Date:		July 2024
+KernelVersion:	6.10
+Contact:	Marek Behún <kabel@kernel.org>
+Description:	(RO) Newer versions of the microcontroller firmware report the
+		features they support. These can be read from this file. If the
+		MCU firmware is too old, this file reads 0x0.
+
+		Format: 0x%x.
+
+What:		/sys/bus/i2c/devices/<mcu_device>/fw_version_hash_application
+Date:		July 2024
+KernelVersion:	6.10
+Contact:	Marek Behún <kabel@kernel.org>
+Description:	(RO) Contains the version hash (commit hash) of the application
+		part of the microcontroller firmware.
+
+		Format: %s.
+
+What:		/sys/bus/i2c/devices/<mcu_device>/fw_version_hash_bootloader
+Date:		July 2024
+KernelVersion:	6.10
+Contact:	Marek Behún <kabel@kernel.org>
+Description:	(RO) Contains the version hash (commit hash) of the bootloader
+		part of the microcontroller firmware.
+
+		Format: %s.
+
+What:		/sys/bus/i2c/devices/<mcu_device>/mcu_type
+Date:		July 2024
+KernelVersion:	6.10
+Contact:	Marek Behún <kabel@kernel.org>
+Description:	(RO) Contains the microcontroller type (STM32, GD32, MKL).
+
+		Format: %s.
+
+What:		/sys/bus/i2c/devices/<mcu_device>/reset_selector
+Date:		July 2024
+KernelVersion:	6.10
+Contact:	Marek Behún <kabel@kernel.org>
+Description:	(RO) Contains the selected factory reset level, determined by
+		how long the rear reset button was held by the user during board
+		reset.
+
+		Format: %i.
+
+What:		/sys/bus/i2c/devices/<mcu_device>/serial_number
+Date:		July 2024
+KernelVersion:	6.10
+Contact:	Marek Behún <kabel@kernel.org>
+Description:	(RO) Contains the 64 bit long board serial number in hexadecimal
+		format.
+
+		Only available if board information is burned in the MCU (older
+		revisions have board information burned in the ATSHA204-A chip).
+
+		Format: %016X.
diff --git a/MAINTAINERS b/MAINTAINERS
index bb869d5b7d4e..513b0cd75590 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2139,6 +2139,7 @@ M:	Marek Behún <kabel@kernel.org>
 S:	Maintained
 W:	https://www.turris.cz/
 F:	Documentation/ABI/testing/debugfs-moxtet
+F:	Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu
 F:	Documentation/ABI/testing/sysfs-bus-moxtet-devices
 F:	Documentation/ABI/testing/sysfs-firmware-turris-mox-rwtm
 F:	Documentation/devicetree/bindings/bus/moxtet.txt
@@ -2152,10 +2153,12 @@ F:	drivers/firmware/turris-mox-rwtm.c
 F:	drivers/gpio/gpio-moxtet.c
 F:	drivers/leds/leds-turris-omnia.c
 F:	drivers/mailbox/armada-37xx-rwtm-mailbox.c
+F:	drivers/platform/cznic/
 F:	drivers/watchdog/armada_37xx_wdt.c
 F:	include/dt-bindings/bus/moxtet.h
 F:	include/linux/armada-37xx-rwtm-mailbox.h
 F:	include/linux/moxtet.h
+F:	include/linux/turris-omnia-mcu-interface.h
 
 ARM/FARADAY FA526 PORT
 M:	Hans Ulli Kroll <ulli.kroll@googlemail.com>
diff --git a/drivers/platform/Kconfig b/drivers/platform/Kconfig
index 868b20361769..fef907a94001 100644
--- a/drivers/platform/Kconfig
+++ b/drivers/platform/Kconfig
@@ -7,6 +7,8 @@ source "drivers/platform/goldfish/Kconfig"
 
 source "drivers/platform/chrome/Kconfig"
 
+source "drivers/platform/cznic/Kconfig"
+
 source "drivers/platform/mellanox/Kconfig"
 
 source "drivers/platform/olpc/Kconfig"
diff --git a/drivers/platform/Makefile b/drivers/platform/Makefile
index 41640172975a..8bf189264374 100644
--- a/drivers/platform/Makefile
+++ b/drivers/platform/Makefile
@@ -10,4 +10,5 @@ obj-$(CONFIG_MIPS)		+= mips/
 obj-$(CONFIG_OLPC_EC)		+= olpc/
 obj-$(CONFIG_GOLDFISH)		+= goldfish/
 obj-$(CONFIG_CHROME_PLATFORMS)	+= chrome/
+obj-$(CONFIG_CZNIC_PLATFORMS)	+= cznic/
 obj-$(CONFIG_SURFACE_PLATFORMS)	+= surface/
diff --git a/drivers/platform/cznic/Kconfig b/drivers/platform/cznic/Kconfig
new file mode 100644
index 000000000000..f8560ff9c1af
--- /dev/null
+++ b/drivers/platform/cznic/Kconfig
@@ -0,0 +1,26 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/kconfig-language.rst.
+#
+
+menuconfig CZNIC_PLATFORMS
+	bool "Platform support for CZ.NIC's Turris hardware"
+	depends on MACH_ARMADA_38X || COMPILE_TEST
+	help
+	  Say Y here to be able to choose driver support for CZ.NIC's Turris
+	  devices. This option alone does not add any kernel code.
+
+if CZNIC_PLATFORMS
+
+config TURRIS_OMNIA_MCU
+	tristate "Turris Omnia MCU driver"
+	depends on MACH_ARMADA_38X || COMPILE_TEST
+	depends on I2C
+	help
+	  Say Y here to add support for the features implemented by the
+	  microcontroller on the CZ.NIC's Turris Omnia SOHO router.
+	  To compile this driver as a module, choose M here; the module will be
+	  called turris-omnia-mcu.
+
+endif # CZNIC_PLATFORMS
diff --git a/drivers/platform/cznic/Makefile b/drivers/platform/cznic/Makefile
new file mode 100644
index 000000000000..31adca73bb94
--- /dev/null
+++ b/drivers/platform/cznic/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+obj-$(CONFIG_TURRIS_OMNIA_MCU)	+= turris-omnia-mcu.o
+turris-omnia-mcu-y		:= turris-omnia-mcu-base.o
diff --git a/drivers/platform/cznic/turris-omnia-mcu-base.c b/drivers/platform/cznic/turris-omnia-mcu-base.c
new file mode 100644
index 000000000000..8893c990853a
--- /dev/null
+++ b/drivers/platform/cznic/turris-omnia-mcu-base.c
@@ -0,0 +1,376 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * CZ.NIC's Turris Omnia MCU driver
+ *
+ * 2024 by Marek Behún <kabel@kernel.org>
+ */
+
+#include <linux/array_size.h>
+#include <linux/bits.h>
+#include <linux/device.h>
+#include <linux/hex.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/turris-omnia-mcu-interface.h>
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/sysfs.h>
+
+#include "turris-omnia-mcu.h"
+
+#define OMNIA_FW_VERSION_LEN		20
+#define OMNIA_FW_VERSION_HEX_LEN	(2 * OMNIA_FW_VERSION_LEN + 1)
+#define OMNIA_BOARD_INFO_LEN		16
+
+int omnia_cmd_read(const struct i2c_client *client, u8 cmd, void *reply,
+		   unsigned int len)
+{
+	struct i2c_msg msgs[2];
+	int ret;
+
+	msgs[0].addr = client->addr;
+	msgs[0].flags = 0;
+	msgs[0].len = 1;
+	msgs[0].buf = &cmd;
+	msgs[1].addr = client->addr;
+	msgs[1].flags = I2C_M_RD;
+	msgs[1].len = len;
+	msgs[1].buf = reply;
+
+	ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
+	if (ret < 0)
+		return ret;
+	if (ret != ARRAY_SIZE(msgs))
+		return -EIO;
+
+	return 0;
+}
+
+static int omnia_get_version_hash(struct omnia_mcu *mcu, bool bootloader,
+				  u8 version[static OMNIA_FW_VERSION_HEX_LEN])
+{
+	u8 reply[OMNIA_FW_VERSION_LEN];
+	int err;
+
+	err = omnia_cmd_read(mcu->client,
+			     bootloader ? CMD_GET_FW_VERSION_BOOT
+					: CMD_GET_FW_VERSION_APP,
+			     reply, sizeof(reply));
+	if (err)
+		return err;
+
+	version[OMNIA_FW_VERSION_HEX_LEN - 1] = '\0';
+	bin2hex(version, reply, OMNIA_FW_VERSION_LEN);
+
+	return 0;
+}
+
+static ssize_t fw_version_hash_show(struct device *dev, char *buf,
+				    bool bootloader)
+{
+	struct omnia_mcu *mcu = dev_get_drvdata(dev);
+	u8 version[OMNIA_FW_VERSION_HEX_LEN];
+	int err;
+
+	err = omnia_get_version_hash(mcu, bootloader, version);
+	if (err)
+		return err;
+
+	return sysfs_emit(buf, "%s\n", version);
+}
+
+static ssize_t fw_version_hash_application_show(struct device *dev,
+						struct device_attribute *a,
+						char *buf)
+{
+	return fw_version_hash_show(dev, buf, false);
+}
+static DEVICE_ATTR_RO(fw_version_hash_application);
+
+static ssize_t fw_version_hash_bootloader_show(struct device *dev,
+					       struct device_attribute *a,
+					       char *buf)
+{
+	return fw_version_hash_show(dev, buf, true);
+}
+static DEVICE_ATTR_RO(fw_version_hash_bootloader);
+
+static ssize_t fw_features_show(struct device *dev, struct device_attribute *a,
+				char *buf)
+{
+	struct omnia_mcu *mcu = dev_get_drvdata(dev);
+
+	return sysfs_emit(buf, "0x%x\n", mcu->features);
+}
+static DEVICE_ATTR_RO(fw_features);
+
+static ssize_t mcu_type_show(struct device *dev, struct device_attribute *a,
+			     char *buf)
+{
+	struct omnia_mcu *mcu = dev_get_drvdata(dev);
+
+	return sysfs_emit(buf, "%s\n", mcu->type);
+}
+static DEVICE_ATTR_RO(mcu_type);
+
+static ssize_t reset_selector_show(struct device *dev,
+				   struct device_attribute *a, char *buf)
+{
+	int ret;
+
+	ret = omnia_cmd_read_u8(to_i2c_client(dev), CMD_GET_RESET);
+	if (ret < 0)
+		return ret;
+
+	return sysfs_emit(buf, "%d\n", ret);
+}
+static DEVICE_ATTR_RO(reset_selector);
+
+static ssize_t serial_number_show(struct device *dev,
+				  struct device_attribute *a, char *buf)
+{
+	struct omnia_mcu *mcu = dev_get_drvdata(dev);
+
+	return sysfs_emit(buf, "%016llX\n", mcu->board_serial_number);
+}
+static DEVICE_ATTR_RO(serial_number);
+
+static ssize_t first_mac_address_show(struct device *dev,
+				      struct device_attribute *a, char *buf)
+{
+	struct omnia_mcu *mcu = dev_get_drvdata(dev);
+
+	return sysfs_emit(buf, "%pM\n", mcu->board_first_mac);
+}
+static DEVICE_ATTR_RO(first_mac_address);
+
+static ssize_t board_revision_show(struct device *dev,
+				   struct device_attribute *a, char *buf)
+{
+	struct omnia_mcu *mcu = dev_get_drvdata(dev);
+
+	return sysfs_emit(buf, "%u\n", mcu->board_revision);
+}
+static DEVICE_ATTR_RO(board_revision);
+
+static struct attribute *omnia_mcu_base_attrs[] = {
+	&dev_attr_fw_version_hash_application.attr,
+	&dev_attr_fw_version_hash_bootloader.attr,
+	&dev_attr_fw_features.attr,
+	&dev_attr_mcu_type.attr,
+	&dev_attr_reset_selector.attr,
+	&dev_attr_serial_number.attr,
+	&dev_attr_first_mac_address.attr,
+	&dev_attr_board_revision.attr,
+	NULL
+};
+
+static umode_t omnia_mcu_base_attrs_visible(struct kobject *kobj,
+					    struct attribute *a, int n)
+{
+	struct device *dev = kobj_to_dev(kobj);
+	struct omnia_mcu *mcu = dev_get_drvdata(dev);
+	umode_t mode = a->mode;
+
+	if ((a == &dev_attr_serial_number.attr ||
+	     a == &dev_attr_first_mac_address.attr ||
+	     a == &dev_attr_board_revision.attr) &&
+	    !(mcu->features & FEAT_BOARD_INFO))
+		mode = 0;
+
+	return mode;
+}
+
+static const struct attribute_group omnia_mcu_base_group = {
+	.attrs = omnia_mcu_base_attrs,
+	.is_visible = omnia_mcu_base_attrs_visible,
+};
+
+static const struct attribute_group *omnia_mcu_groups[] = {
+	&omnia_mcu_base_group,
+	NULL
+};
+
+static void omnia_mcu_print_version_hash(struct omnia_mcu *mcu, bool bootloader)
+{
+	const char *type = bootloader ? "bootloader" : "application";
+	struct device *dev = &mcu->client->dev;
+	u8 version[OMNIA_FW_VERSION_HEX_LEN];
+	int err;
+
+	err = omnia_get_version_hash(mcu, bootloader, version);
+	if (err) {
+		dev_err(dev, "Cannot read MCU %s firmware version: %d\n", type,
+			err);
+		return;
+	}
+
+	dev_info(dev, "MCU %s firmware version hash: %s\n", type, version);
+}
+
+static const char *omnia_status_to_mcu_type(uint16_t status)
+{
+	switch (status & STS_MCU_TYPE_MASK) {
+	case STS_MCU_TYPE_STM32:
+		return "STM32";
+	case STS_MCU_TYPE_GD32:
+		return "GD32";
+	case STS_MCU_TYPE_MKL:
+		return "MKL";
+	default:
+		return "unknown";
+	}
+}
+
+static void omnia_info_missing_feature(struct device *dev, const char *feature)
+{
+	dev_info(dev,
+		 "Your board's MCU firmware does not support the %s feature.\n",
+		 feature);
+}
+
+static int omnia_mcu_read_features(struct omnia_mcu *mcu)
+{
+	static const struct {
+		uint16_t mask;
+		const char *name;
+	} features[] = {
+		{ FEAT_EXT_CMDS,	   "extended control and status" },
+		{ FEAT_WDT_PING,	   "watchdog pinging" },
+		{ FEAT_LED_STATE_EXT_MASK, "peripheral LED pins reading" },
+		{ FEAT_NEW_INT_API,	   "new interrupt API" },
+		{ FEAT_POWEROFF_WAKEUP,	   "poweroff and wakeup" },
+		{ FEAT_TRNG,		   "true random number generator" },
+	};
+	struct device *dev = &mcu->client->dev;
+	bool suggest_fw_upgrade = false;
+	int status;
+
+	/* status word holds MCU type, which we need below */
+	status = omnia_cmd_read_u16(mcu->client, CMD_GET_STATUS_WORD);
+	if (status < 0)
+		return status;
+
+	/* check whether MCU firmware supports the CMD_GET_FEAUTRES command */
+	if (status & STS_FEATURES_SUPPORTED) {
+		__le32 reply;
+		int ret;
+
+		/* try read 32-bit features */
+		ret = omnia_cmd_read(mcu->client, CMD_GET_FEATURES, &reply,
+				     sizeof(reply));
+		if (ret) {
+			/* try read 16-bit features */
+			ret = omnia_cmd_read_u16(mcu->client, CMD_GET_FEATURES);
+			if (ret < 0)
+				return ret;
+
+			mcu->features = ret;
+		} else {
+			mcu->features = le32_to_cpu(reply);
+
+			if (mcu->features & FEAT_FROM_BIT_16_INVALID)
+				mcu->features &= GENMASK(15, 0);
+		}
+	} else {
+		omnia_info_missing_feature(dev, "feature reading");
+		suggest_fw_upgrade = true;
+	}
+
+	mcu->type = omnia_status_to_mcu_type(status);
+	dev_info(dev, "MCU type %s%s\n", mcu->type,
+		 (mcu->features & FEAT_PERIPH_MCU) ?
+			", with peripheral resets wired" : "");
+
+	omnia_mcu_print_version_hash(mcu, true);
+
+	if (mcu->features & FEAT_BOOTLOADER)
+		dev_warn(dev,
+			 "MCU is running bootloader firmware. Was firmware upgrade interrupted?\n");
+	else
+		omnia_mcu_print_version_hash(mcu, false);
+
+	for (unsigned int i = 0; i < ARRAY_SIZE(features); i++) {
+		if (mcu->features & features[i].mask)
+			continue;
+
+		omnia_info_missing_feature(dev, features[i].name);
+		suggest_fw_upgrade = true;
+	}
+
+	if (suggest_fw_upgrade)
+		dev_info(dev,
+			 "Consider upgrading MCU firmware with the omnia-mcutool utility.\n");
+
+	return 0;
+}
+
+static int omnia_mcu_read_board_info(struct omnia_mcu *mcu)
+{
+	u8 reply[1 + OMNIA_BOARD_INFO_LEN];
+	int err;
+
+	err = omnia_cmd_read(mcu->client, CMD_BOARD_INFO_GET, reply,
+			     sizeof(reply));
+	if (err)
+		return err;
+
+	if (reply[0] != OMNIA_BOARD_INFO_LEN)
+		return -EIO;
+
+	mcu->board_serial_number = get_unaligned_le64(&reply[1]);
+	memcpy(mcu->board_first_mac, &reply[9], ETH_ALEN);
+	mcu->board_revision = reply[15];
+
+	return 0;
+}
+
+static int omnia_mcu_probe(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	struct omnia_mcu *mcu;
+	int err;
+
+	if (!client->irq)
+		return dev_err_probe(dev, -EINVAL, "IRQ resource not found\n");
+
+	mcu = devm_kzalloc(dev, sizeof(*mcu), GFP_KERNEL);
+	if (!mcu)
+		return -ENOMEM;
+
+	mcu->client = client;
+	i2c_set_clientdata(client, mcu);
+
+	err = omnia_mcu_read_features(mcu);
+	if (err)
+		return dev_err_probe(dev, err,
+				     "Cannot determine MCU supported features\n");
+
+	if (mcu->features & FEAT_BOARD_INFO) {
+		err = omnia_mcu_read_board_info(mcu);
+		if (err)
+			return dev_err_probe(dev, err,
+					     "Cannot read board info\n");
+	}
+
+	return 0;
+}
+
+static const struct of_device_id of_omnia_mcu_match[] = {
+	{ .compatible = "cznic,turris-omnia-mcu" },
+	{}
+};
+
+static struct i2c_driver omnia_mcu_driver = {
+	.probe		= omnia_mcu_probe,
+	.driver		= {
+		.name	= "turris-omnia-mcu",
+		.of_match_table = of_omnia_mcu_match,
+		.dev_groups = omnia_mcu_groups,
+	},
+};
+module_i2c_driver(omnia_mcu_driver);
+
+MODULE_AUTHOR("Marek Behun <kabel@kernel.org>");
+MODULE_DESCRIPTION("CZ.NIC's Turris Omnia MCU");
+MODULE_LICENSE("GPL");
diff --git a/drivers/platform/cznic/turris-omnia-mcu.h b/drivers/platform/cznic/turris-omnia-mcu.h
new file mode 100644
index 000000000000..5b21fbca8fe1
--- /dev/null
+++ b/drivers/platform/cznic/turris-omnia-mcu.h
@@ -0,0 +1,50 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * CZ.NIC's Turris Omnia MCU driver
+ *
+ * 2024 by Marek Behún <kabel@kernel.org>
+ */
+
+#ifndef __TURRIS_OMNIA_MCU_H
+#define __TURRIS_OMNIA_MCU_H
+
+#include <linux/i2c.h>
+#include <linux/if_ether.h>
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+struct omnia_mcu {
+	struct i2c_client *client;
+	const char *type;
+	u32 features;
+
+	/* board information */
+	u64 board_serial_number;
+	u8 board_first_mac[ETH_ALEN];
+	u8 board_revision;
+};
+
+int omnia_cmd_read(const struct i2c_client *client, u8 cmd, void *reply,
+		   unsigned int len);
+
+static inline int omnia_cmd_read_u16(const struct i2c_client *client, u8 cmd)
+{
+	__le16 reply;
+	int err;
+
+	err = omnia_cmd_read(client, cmd, &reply, sizeof(reply));
+
+	return err ?: le16_to_cpu(reply);
+}
+
+static inline int omnia_cmd_read_u8(const struct i2c_client *client, u8 cmd)
+{
+	u8 reply;
+	int err;
+
+	err = omnia_cmd_read(client, cmd, &reply, sizeof(reply));
+
+	return err ?: reply;
+}
+
+#endif /* __TURRIS_OMNIA_MCU_H */
diff --git a/include/linux/turris-omnia-mcu-interface.h b/include/linux/turris-omnia-mcu-interface.h
new file mode 100644
index 000000000000..88f8490b5897
--- /dev/null
+++ b/include/linux/turris-omnia-mcu-interface.h
@@ -0,0 +1,249 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * CZ.NIC's Turris Omnia MCU I2C interface commands definitions
+ *
+ * 2024 by Marek Behún <kabel@kernel.org>
+ */
+
+#ifndef __TURRIS_OMNIA_MCU_INTERFACE_H
+#define __TURRIS_OMNIA_MCU_INTERFACE_H
+
+#include <linux/bitfield.h>
+#include <linux/bits.h>
+
+enum omnia_commands_e {
+	CMD_GET_STATUS_WORD		= 0x01, /* slave sends status word back */
+	CMD_GENERAL_CONTROL		= 0x02,
+	CMD_LED_MODE			= 0x03, /* default/user */
+	CMD_LED_STATE			= 0x04, /* LED on/off */
+	CMD_LED_COLOR			= 0x05, /* LED number + RED + GREEN + BLUE */
+	CMD_USER_VOLTAGE		= 0x06,
+	CMD_SET_BRIGHTNESS		= 0x07,
+	CMD_GET_BRIGHTNESS		= 0x08,
+	CMD_GET_RESET			= 0x09,
+	CMD_GET_FW_VERSION_APP		= 0x0A, /* 20B git hash number */
+	CMD_SET_WATCHDOG_STATE		= 0x0B, /* 0 - disable
+						 * 1 - enable / ping
+						 * after boot watchdog is started
+						 * with 2 minutes timeout
+						 */
+
+	/* CMD_WATCHDOG_STATUS		= 0x0C, not implemented anymore */
+
+	CMD_GET_WATCHDOG_STATE		= 0x0D,
+	CMD_GET_FW_VERSION_BOOT		= 0x0E, /* 20B git hash number */
+	CMD_GET_FW_CHECKSUM		= 0x0F, /* 4B length, 4B checksum */
+
+	/* available if FEATURES_SUPPORTED bit set in status word */
+	CMD_GET_FEATURES		= 0x10,
+
+	/* available if EXT_CMD bit set in features */
+	CMD_GET_EXT_STATUS_DWORD	= 0x11,
+	CMD_EXT_CONTROL			= 0x12,
+	CMD_GET_EXT_CONTROL_STATUS	= 0x13,
+
+	/* available if NEW_INT_API bit set in features */
+	CMD_GET_INT_AND_CLEAR		= 0x14,
+	CMD_GET_INT_MASK		= 0x15,
+	CMD_SET_INT_MASK		= 0x16,
+
+	/* available if FLASHING bit set in features */
+	CMD_FLASH			= 0x19,
+
+	/* available if WDT_PING bit set in features */
+	CMD_SET_WDT_TIMEOUT		= 0x20,
+	CMD_GET_WDT_TIMELEFT		= 0x21,
+
+	/* available if POWEROFF_WAKEUP bit set in features */
+	CMD_SET_WAKEUP			= 0x22,
+	CMD_GET_UPTIME_AND_WAKEUP	= 0x23,
+	CMD_POWER_OFF			= 0x24,
+
+	/* available if USB_OVC_PROT_SETTING bit set in features */
+	CMD_SET_USB_OVC_PROT		= 0x25,
+	CMD_GET_USB_OVC_PROT		= 0x26,
+
+	/* available if TRNG bit set in features */
+	CMD_TRNG_COLLECT_ENTROPY	= 0x28,
+
+	/* available if CRYPTO bit set in features */
+	CMD_CRYPTO_GET_PUBLIC_KEY	= 0x29,
+	CMD_CRYPTO_SIGN_MESSAGE		= 0x2A,
+	CMD_CRYPTO_COLLECT_SIGNATURE	= 0x2B,
+
+	/* available if BOARD_INFO it set in features */
+	CMD_BOARD_INFO_GET		= 0x2C,
+	CMD_BOARD_INFO_BURN		= 0x2D,
+
+	/* available only at address 0x2b (led-controller) */
+	/* available only if LED_GAMMA_CORRECTION bit set in features */
+	CMD_SET_GAMMA_CORRECTION	= 0x30,
+	CMD_GET_GAMMA_CORRECTION	= 0x31,
+
+	/* available only at address 0x2b (led-controller) */
+	/* available only if PER_LED_CORRECTION bit set in features */
+	/* available only if FROM_BIT_16_INVALID bit NOT set in features */
+	CMD_SET_LED_CORRECTIONS		= 0x32,
+	CMD_GET_LED_CORRECTIONS		= 0x33,
+};
+
+enum omnia_flashing_commands_e {
+	FLASH_CMD_UNLOCK		= 0x01,
+	FLASH_CMD_SIZE_AND_CSUM		= 0x02,
+	FLASH_CMD_PROGRAM		= 0x03,
+	FLASH_CMD_RESET			= 0x04,
+};
+
+enum omnia_sts_word_e {
+	STS_MCU_TYPE_MASK			= GENMASK(1, 0),
+	STS_MCU_TYPE_STM32			= 0 << 0,
+	STS_MCU_TYPE_GD32			= 1 << 0,
+	STS_MCU_TYPE_MKL			= 2 << 0,
+	STS_FEATURES_SUPPORTED			= BIT(2),
+	STS_USER_REGULATOR_NOT_SUPPORTED	= BIT(3),
+	STS_CARD_DET				= BIT(4),
+	STS_MSATA_IND				= BIT(5),
+	STS_USB30_OVC				= BIT(6),
+	STS_USB31_OVC				= BIT(7),
+	STS_USB30_PWRON				= BIT(8),
+	STS_USB31_PWRON				= BIT(9),
+	STS_ENABLE_4V5				= BIT(10),
+	STS_BUTTON_MODE				= BIT(11),
+	STS_BUTTON_PRESSED			= BIT(12),
+	STS_BUTTON_COUNTER_MASK			= GENMASK(15, 13)
+};
+
+enum omnia_ctl_byte_e {
+	CTL_LIGHT_RST		= BIT(0),
+	CTL_HARD_RST		= BIT(1),
+	/* BIT(2) is currently reserved */
+	CTL_USB30_PWRON		= BIT(3),
+	CTL_USB31_PWRON		= BIT(4),
+	CTL_ENABLE_4V5		= BIT(5),
+	CTL_BUTTON_MODE		= BIT(6),
+	CTL_BOOTLOADER		= BIT(7)
+};
+
+enum omnia_features_e {
+	FEAT_PERIPH_MCU			= BIT(0),
+	FEAT_EXT_CMDS			= BIT(1),
+	FEAT_WDT_PING			= BIT(2),
+	FEAT_LED_STATE_EXT_MASK		= GENMASK(4, 3),
+	FEAT_LED_STATE_EXT		= 1 << 3,
+	FEAT_LED_STATE_EXT_V32		= 2 << 3,
+	FEAT_LED_GAMMA_CORRECTION	= BIT(5),
+	FEAT_NEW_INT_API		= BIT(6),
+	FEAT_BOOTLOADER			= BIT(7),
+	FEAT_FLASHING			= BIT(8),
+	FEAT_NEW_MESSAGE_API		= BIT(9),
+	FEAT_BRIGHTNESS_INT		= BIT(10),
+	FEAT_POWEROFF_WAKEUP		= BIT(11),
+	FEAT_CAN_OLD_MESSAGE_API	= BIT(12),
+	FEAT_TRNG			= BIT(13),
+	FEAT_CRYPTO			= BIT(14),
+	FEAT_BOARD_INFO			= BIT(15),
+
+	/*
+	 * Orginally the features command replied only 16 bits. If more were
+	 * read, either the I2C transaction failed or 0xff bytes were sent.
+	 * Therefore to consider bits 16 - 31 valid, one bit (20) was reserved
+	 * to be zero.
+	 */
+
+	/* Bits 16 - 19 correspond to bits 0 - 3 of status word */
+	FEAT_MCU_TYPE_MASK		= GENMASK(17, 16),
+	FEAT_MCU_TYPE_STM32		= 0 << 16,
+	FEAT_MCU_TYPE_GD32		= 1 << 16,
+	FEAT_MCU_TYPE_MKL		= 2 << 16,
+	FEAT_FEATURES_SUPPORTED		= BIT(18),
+	FEAT_USER_REGULATOR_NOT_SUPPORTED = BIT(19),
+
+	/* must not be set */
+	FEAT_FROM_BIT_16_INVALID	= BIT(20),
+
+	FEAT_PER_LED_CORRECTION		= BIT(21),
+	FEAT_USB_OVC_PROT_SETTING	= BIT(22),
+};
+
+enum omnia_ext_sts_dword_e {
+	EXT_STS_SFP_nDET		= BIT(0),
+	EXT_STS_LED_STATES_MASK		= GENMASK(31, 12),
+	EXT_STS_WLAN0_MSATA_LED		= BIT(12),
+	EXT_STS_WLAN1_LED		= BIT(13),
+	EXT_STS_WLAN2_LED		= BIT(14),
+	EXT_STS_WPAN0_LED		= BIT(15),
+	EXT_STS_WPAN1_LED		= BIT(16),
+	EXT_STS_WPAN2_LED		= BIT(17),
+	EXT_STS_WAN_LED0		= BIT(18),
+	EXT_STS_WAN_LED1		= BIT(19),
+	EXT_STS_LAN0_LED0		= BIT(20),
+	EXT_STS_LAN0_LED1		= BIT(21),
+	EXT_STS_LAN1_LED0		= BIT(22),
+	EXT_STS_LAN1_LED1		= BIT(23),
+	EXT_STS_LAN2_LED0		= BIT(24),
+	EXT_STS_LAN2_LED1		= BIT(25),
+	EXT_STS_LAN3_LED0		= BIT(26),
+	EXT_STS_LAN3_LED1		= BIT(27),
+	EXT_STS_LAN4_LED0		= BIT(28),
+	EXT_STS_LAN4_LED1		= BIT(29),
+	EXT_STS_LAN5_LED0		= BIT(30),
+	EXT_STS_LAN5_LED1		= BIT(31),
+};
+
+enum omnia_ext_ctl_e {
+	EXT_CTL_nRES_MMC		= BIT(0),
+	EXT_CTL_nRES_LAN		= BIT(1),
+	EXT_CTL_nRES_PHY		= BIT(2),
+	EXT_CTL_nPERST0			= BIT(3),
+	EXT_CTL_nPERST1			= BIT(4),
+	EXT_CTL_nPERST2			= BIT(5),
+	EXT_CTL_PHY_SFP			= BIT(6),
+	EXT_CTL_PHY_SFP_AUTO		= BIT(7),
+	EXT_CTL_nVHV_CTRL		= BIT(8),
+};
+
+enum omnia_int_e {
+	INT_CARD_DET		= BIT(0),
+	INT_MSATA_IND		= BIT(1),
+	INT_USB30_OVC		= BIT(2),
+	INT_USB31_OVC		= BIT(3),
+	INT_BUTTON_PRESSED	= BIT(4),
+	INT_SFP_nDET		= BIT(5),
+	INT_BRIGHTNESS_CHANGED	= BIT(6),
+	INT_TRNG		= BIT(7),
+	INT_MESSAGE_SIGNED	= BIT(8),
+
+	INT_LED_STATES_MASK	= GENMASK(31, 12),
+	INT_WLAN0_MSATA_LED	= BIT(12),
+	INT_WLAN1_LED		= BIT(13),
+	INT_WLAN2_LED		= BIT(14),
+	INT_WPAN0_LED		= BIT(15),
+	INT_WPAN1_LED		= BIT(16),
+	INT_WPAN2_LED		= BIT(17),
+	INT_WAN_LED0		= BIT(18),
+	INT_WAN_LED1		= BIT(19),
+	INT_LAN0_LED0		= BIT(20),
+	INT_LAN0_LED1		= BIT(21),
+	INT_LAN1_LED0		= BIT(22),
+	INT_LAN1_LED1		= BIT(23),
+	INT_LAN2_LED0		= BIT(24),
+	INT_LAN2_LED1		= BIT(25),
+	INT_LAN3_LED0		= BIT(26),
+	INT_LAN3_LED1		= BIT(27),
+	INT_LAN4_LED0		= BIT(28),
+	INT_LAN4_LED1		= BIT(29),
+	INT_LAN5_LED0		= BIT(30),
+	INT_LAN5_LED1		= BIT(31),
+};
+
+enum omnia_cmd_poweroff_e {
+	CMD_POWER_OFF_POWERON_BUTTON	= BIT(0),
+	CMD_POWER_OFF_MAGIC		= 0xdead,
+};
+
+enum cmd_usb_ovc_prot_e {
+	CMD_xET_USB_OVC_PROT_PORT_MASK	= GENMASK(3, 0),
+	CMD_xET_USB_OVC_PROT_ENABLE	= BIT(4),
+};
+
+#endif /* __TURRIS_OMNIA_MCU_INTERFACE_H */
-- 
2.43.2

[PATCH v7 5/9] platform: cznic: turris-omnia-mcu: Add support for MCU watchdog

[Marek Behún]

Add support for the watchdog mechanism provided by the MCU.

Signed-off-by: Marek Behún <kabel@kernel.org>
---
 drivers/platform/cznic/Kconfig                |   2 +
 drivers/platform/cznic/Makefile               |   1 +
 .../platform/cznic/turris-omnia-mcu-base.c    |   4 +
 .../cznic/turris-omnia-mcu-watchdog.c         | 123 ++++++++++++++++++
 drivers/platform/cznic/turris-omnia-mcu.h     |  24 ++++
 5 files changed, 154 insertions(+)
 create mode 100644 drivers/platform/cznic/turris-omnia-mcu-watchdog.c

diff --git a/drivers/platform/cznic/Kconfig b/drivers/platform/cznic/Kconfig
index 0a752aa654fa..e2649cdecc38 100644
--- a/drivers/platform/cznic/Kconfig
+++ b/drivers/platform/cznic/Kconfig
@@ -20,6 +20,7 @@ config TURRIS_OMNIA_MCU
 	select GPIOLIB
 	select GPIOLIB_IRQCHIP
 	select RTC_CLASS
+	select WATCHDOG_CORE
 	help
 	  Say Y here to add support for the features implemented by the
 	  microcontroller on the CZ.NIC's Turris Omnia SOHO router.
@@ -27,6 +28,7 @@ config TURRIS_OMNIA_MCU
 	  - board poweroff into true low power mode (with voltage regulators
 	    disabled) and the ability to configure wake up from this mode (via
 	    rtcwake)
+	  - MCU watchdog
 	  - GPIO pins
 	    - to get front button press events (the front button can be
 	      configured either to generate press events to the CPU or to change
diff --git a/drivers/platform/cznic/Makefile b/drivers/platform/cznic/Makefile
index a185ef882e44..687f7718c0a1 100644
--- a/drivers/platform/cznic/Makefile
+++ b/drivers/platform/cznic/Makefile
@@ -4,3 +4,4 @@ obj-$(CONFIG_TURRIS_OMNIA_MCU)	+= turris-omnia-mcu.o
 turris-omnia-mcu-y		:= turris-omnia-mcu-base.o
 turris-omnia-mcu-y		+= turris-omnia-mcu-gpio.o
 turris-omnia-mcu-y		+= turris-omnia-mcu-sys-off-wakeup.o
+turris-omnia-mcu-y		+= turris-omnia-mcu-watchdog.o
diff --git a/drivers/platform/cznic/turris-omnia-mcu-base.c b/drivers/platform/cznic/turris-omnia-mcu-base.c
index 697ace090bda..5f88119d825c 100644
--- a/drivers/platform/cznic/turris-omnia-mcu-base.c
+++ b/drivers/platform/cznic/turris-omnia-mcu-base.c
@@ -365,6 +365,10 @@ static int omnia_mcu_probe(struct i2c_client *client)
 	if (err)
 		return err;
 
+	err = omnia_mcu_register_watchdog(mcu);
+	if (err)
+		return err;
+
 	return omnia_mcu_register_gpiochip(mcu);
 }
 
diff --git a/drivers/platform/cznic/turris-omnia-mcu-watchdog.c b/drivers/platform/cznic/turris-omnia-mcu-watchdog.c
new file mode 100644
index 000000000000..b0de9585da84
--- /dev/null
+++ b/drivers/platform/cznic/turris-omnia-mcu-watchdog.c
@@ -0,0 +1,123 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * CZ.NIC's Turris Omnia MCU watchdog driver
+ *
+ * 2024 by Marek Behún <kabel@kernel.org>
+ */
+
+#include <linux/i2c.h>
+#include <linux/moduleparam.h>
+#include <linux/turris-omnia-mcu-interface.h>
+#include <linux/types.h>
+#include <linux/watchdog.h>
+
+#include "turris-omnia-mcu.h"
+
+#define WATCHDOG_TIMEOUT		120
+
+static unsigned int timeout;
+module_param(timeout, int, 0);
+MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds");
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+			   __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+static int omnia_wdt_start(struct watchdog_device *wdt)
+{
+	struct omnia_mcu *mcu = watchdog_get_drvdata(wdt);
+
+	return omnia_cmd_write_u8(mcu->client, CMD_SET_WATCHDOG_STATE, 1);
+}
+
+static int omnia_wdt_stop(struct watchdog_device *wdt)
+{
+	struct omnia_mcu *mcu = watchdog_get_drvdata(wdt);
+
+	return omnia_cmd_write_u8(mcu->client, CMD_SET_WATCHDOG_STATE, 0);
+}
+
+static int omnia_wdt_ping(struct watchdog_device *wdt)
+{
+	struct omnia_mcu *mcu = watchdog_get_drvdata(wdt);
+
+	return omnia_cmd_write_u8(mcu->client, CMD_SET_WATCHDOG_STATE, 1);
+}
+
+static int omnia_wdt_set_timeout(struct watchdog_device *wdt,
+				 unsigned int timeout)
+{
+	struct omnia_mcu *mcu = watchdog_get_drvdata(wdt);
+
+	return omnia_cmd_write_u16(mcu->client, CMD_SET_WDT_TIMEOUT,
+				   timeout * 10);
+}
+
+static unsigned int omnia_wdt_get_timeleft(struct watchdog_device *wdt)
+{
+	struct omnia_mcu *mcu = watchdog_get_drvdata(wdt);
+	int ret;
+
+	ret = omnia_cmd_read_u16(mcu->client, CMD_GET_WDT_TIMELEFT);
+	if (ret < 0) {
+		dev_err(&mcu->client->dev, "Cannot get watchdog timeleft: %d\n",
+			ret);
+		return 0;
+	}
+
+	return ret / 10;
+}
+
+static const struct watchdog_info omnia_wdt_info = {
+	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
+	.identity = "Turris Omnia MCU Watchdog",
+};
+
+static const struct watchdog_ops omnia_wdt_ops = {
+	.owner		= THIS_MODULE,
+	.start		= omnia_wdt_start,
+	.stop		= omnia_wdt_stop,
+	.ping		= omnia_wdt_ping,
+	.set_timeout	= omnia_wdt_set_timeout,
+	.get_timeleft	= omnia_wdt_get_timeleft,
+};
+
+int omnia_mcu_register_watchdog(struct omnia_mcu *mcu)
+{
+	struct device *dev = &mcu->client->dev;
+	int ret;
+
+	if (!(mcu->features & FEAT_WDT_PING))
+		return 0;
+
+	mcu->wdt.info = &omnia_wdt_info;
+	mcu->wdt.ops = &omnia_wdt_ops;
+	mcu->wdt.parent = dev;
+	mcu->wdt.min_timeout = 1;
+	mcu->wdt.max_timeout = 6553; /* 65535 deciseconds */
+
+	mcu->wdt.timeout = WATCHDOG_TIMEOUT;
+	watchdog_init_timeout(&mcu->wdt, timeout, dev);
+
+	watchdog_set_drvdata(&mcu->wdt, mcu);
+
+	omnia_wdt_set_timeout(&mcu->wdt, mcu->wdt.timeout);
+
+	ret = omnia_cmd_read_u8(mcu->client, CMD_GET_WATCHDOG_STATE);
+	if (ret < 0)
+		return dev_err_probe(dev, ret,
+				     "Cannot get MCU watchdog state\n");
+
+	if (ret)
+		set_bit(WDOG_HW_RUNNING, &mcu->wdt.status);
+
+	watchdog_set_nowayout(&mcu->wdt, nowayout);
+	watchdog_stop_on_reboot(&mcu->wdt);
+	ret = devm_watchdog_register_device(dev, &mcu->wdt);
+	if (ret)
+		return dev_err_probe(dev, ret,
+				     "Cannot register MCU watchdog\n");
+
+	return 0;
+}
diff --git a/drivers/platform/cznic/turris-omnia-mcu.h b/drivers/platform/cznic/turris-omnia-mcu.h
index 6179a4f2069e..1838cb3d636e 100644
--- a/drivers/platform/cznic/turris-omnia-mcu.h
+++ b/drivers/platform/cznic/turris-omnia-mcu.h
@@ -14,6 +14,7 @@
 #include <linux/mutex.h>
 #include <linux/rtc.h>
 #include <linux/types.h>
+#include <linux/watchdog.h>
 #include <linux/workqueue.h>
 #include <asm/byteorder.h>
 #include <asm/unaligned.h>
@@ -41,6 +42,9 @@ struct omnia_mcu {
 	struct rtc_device *rtcdev;
 	u32 rtc_alarm;
 	bool front_button_poweron;
+
+	/* MCU watchdog */
+	struct watchdog_device wdt;
 };
 
 int omnia_cmd_write_read(const struct i2c_client *client,
@@ -53,6 +57,25 @@ static inline int omnia_cmd_write(const struct i2c_client *client, void *cmd,
 	return omnia_cmd_write_read(client, cmd, len, NULL, 0);
 }
 
+static inline int omnia_cmd_write_u8(const struct i2c_client *client, u8 cmd,
+				     u8 val)
+{
+	u8 buf[2] = { cmd, val };
+
+	return omnia_cmd_write(client, buf, sizeof(buf));
+}
+
+static inline int omnia_cmd_write_u16(const struct i2c_client *client, u8 cmd,
+				      u16 val)
+{
+	u8 buf[3];
+
+	buf[0] = cmd;
+	put_unaligned_le16(val, &buf[1]);
+
+	return omnia_cmd_write(client, buf, sizeof(buf));
+}
+
 static inline int omnia_cmd_write_u32(const struct i2c_client *client, u8 cmd,
 				      u32 val)
 {
@@ -129,5 +152,6 @@ extern const struct attribute_group omnia_mcu_poweroff_group;
 
 int omnia_mcu_register_gpiochip(struct omnia_mcu *mcu);
 int omnia_mcu_register_sys_off_and_wakeup(struct omnia_mcu *mcu);
+int omnia_mcu_register_watchdog(struct omnia_mcu *mcu);
 
 #endif /* __TURRIS_OMNIA_MCU_H */
-- 
2.43.2

Re: [PATCH v7 0/9] Turris Omnia MCU driver

[Gregory CLEMENT]

Hello all,

> Hello Andy, Hans, Ilpo, Arnd, Gregory, and others,
>
> this is v7 of the series adding Turris Omnia MCU driver.
>
> This series depends on the immutable branch between LEDs and locking,
> introducing devm_mutex_init(), see the PR
>   https://lore.kernel.org/linux-leds/20240412084616.GR2399047@google.com/
>
> See also cover letters for v1, v2, v3, v4, v5 and v6:
>   https://patchwork.kernel.org/project/linux-soc/cover/20230823161012.6986-1-kabel@kernel.org/
>   https://patchwork.kernel.org/project/linux-soc/cover/20230919103815.16818-1-kabel@kernel.org/
>   https://patchwork.kernel.org/project/linux-soc/cover/20231023143130.11602-1-kabel@kernel.org/
>   https://patchwork.kernel.org/project/linux-soc/cover/20231026161803.16750-1-kabel@kernel.org/
>   https://patchwork.kernel.org/project/linux-soc/cover/20240323164359.21642-1-kabel@kernel.org/
>   https://patchwork.kernel.org/project/linux-soc/cover/20240418121116.22184-1-kabel@kernel.org/
>
> Changes since v6:
> - moved the DT binding from arm/cznic,turris-omnia-mcu.yaml to
>   firmware/cznic,turris-omnia-mcu.yaml, as suggested by Conor Dooley
>   (patch 1)
> - dropped the devm-helpers.h additions, for the reasons see
>   https://lore.kernel.org/soc/20240423184346.37eb0915@thinkpad/
> - use gpiod_to_irq(gpiochip_get_desc(...)) instead of
>   irq_create_mapping(), as suggested by Andy Shevchenko (patches 6 and
>   7)
> - added a dummy read of TRNG entropy when registering TRNG, in case
>   someone cleared the TRNG interrupt before probing the driver, but did
>   not read the entropy (the MCU won't send a new TRNG interrupt if the
>   entropy is not collected) (patch 6)
> - fixed a bug in TRNG probing, wherein if the 
>
> Marek Behún (9):
>   dt-bindings: arm: add cznic,turris-omnia-mcu binding
>   platform: cznic: Add preliminary support for Turris Omnia MCU
>   platform: cznic: turris-omnia-mcu: Add support for MCU connected GPIOs
>   platform: cznic: turris-omnia-mcu: Add support for poweroff and wakeup
>   platform: cznic: turris-omnia-mcu: Add support for MCU watchdog
>   platform: cznic: turris-omnia-mcu: Add support for MCU provided TRNG
>   platform: cznic: turris-omnia-mcu: Add support for digital message
>     signing via debugfs

It is still early as there are some comment pending but I wonder who
will responsible of merging all theses patches ?

Arnd ? Hans ? Ilpo ? me ?

Gregory


>   ARM: dts: turris-omnia: Add MCU system-controller node
>   ARM: dts: turris-omnia: Add GPIO key node for front button
>
>  .../ABI/testing/debugfs-turris-omnia-mcu      |   13 +
>  .../sysfs-bus-i2c-devices-turris-omnia-mcu    |  126 ++
>  .../firmware/cznic,turris-omnia-mcu.yaml      |   86 ++
>  MAINTAINERS                                   |    5 +
>  .../dts/marvell/armada-385-turris-omnia.dts   |   35 +-
>  drivers/platform/Kconfig                      |    2 +
>  drivers/platform/Makefile                     |    1 +
>  drivers/platform/cznic/Kconfig                |   51 +
>  drivers/platform/cznic/Makefile               |    9 +
>  .../platform/cznic/turris-omnia-mcu-base.c    |  439 +++++++
>  .../platform/cznic/turris-omnia-mcu-debugfs.c |  216 ++++
>  .../platform/cznic/turris-omnia-mcu-gpio.c    | 1047 +++++++++++++++++
>  .../cznic/turris-omnia-mcu-sys-off-wakeup.c   |  258 ++++
>  .../platform/cznic/turris-omnia-mcu-trng.c    |  109 ++
>  .../cznic/turris-omnia-mcu-watchdog.c         |  123 ++
>  drivers/platform/cznic/turris-omnia-mcu.h     |  188 +++
>  include/linux/turris-omnia-mcu-interface.h    |  249 ++++
>  17 files changed, 2956 insertions(+), 1 deletion(-)
>  create mode 100644 Documentation/ABI/testing/debugfs-turris-omnia-mcu
>  create mode 100644 Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu
>  create mode 100644 Documentation/devicetree/bindings/firmware/cznic,turris-omnia-mcu.yaml
>  create mode 100644 drivers/platform/cznic/Kconfig
>  create mode 100644 drivers/platform/cznic/Makefile
>  create mode 100644 drivers/platform/cznic/turris-omnia-mcu-base.c
>  create mode 100644 drivers/platform/cznic/turris-omnia-mcu-debugfs.c
>  create mode 100644 drivers/platform/cznic/turris-omnia-mcu-gpio.c
>  create mode 100644 drivers/platform/cznic/turris-omnia-mcu-sys-off-wakeup.c
>  create mode 100644 drivers/platform/cznic/turris-omnia-mcu-trng.c
>  create mode 100644 drivers/platform/cznic/turris-omnia-mcu-watchdog.c
>  create mode 100644 drivers/platform/cznic/turris-omnia-mcu.h
>  create mode 100644 include/linux/turris-omnia-mcu-interface.h
>
> -- 
> 2.43.2

Re: [PATCH v7 0/9] Turris Omnia MCU driver

[Marek Behún]

On Fri, 26 Apr 2024 18:13:32 +0200
Gregory CLEMENT <gregory.clement@bootlin.com> wrote:

> Hello all,
>
...
> 
> It is still early as there are some comment pending but I wonder who
> will responsible of merging all theses patches ?
> 
> Arnd ? Hans ? Ilpo ? me ?

I am assigning these patches to Arnd on patchwork all this time, so I
guess it could be him, unless he has a problem with this?

I've just sent v8.

Marek