linux-watchdog.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Guenter Roeck <linux@roeck-us.net>
To: Linus Walleij <linus.walleij@linaro.org>,
	Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: linux-watchdog@vger.kernel.org,
	Richard Fitzgerald <rf@opensource.cirrus.com>,
	Charles Keepax <ckeepax@opensource.cirrus.com>,
	Mark Brown <broonie@kernel.org>
Subject: Re: [PATCH] watchdog: wm831x_wdt: Remove GPIO handling
Date: Sat, 29 Feb 2020 06:40:57 -0800	[thread overview]
Message-ID: <0c32eef6-89e9-e826-e68a-7cd00468c4c7@roeck-us.net> (raw)
In-Reply-To: <20200229115046.57781-1-linus.walleij@linaro.org>

On 2/29/20 3:50 AM, Linus Walleij wrote:
> An attempt to convert the driver to using GPIO descriptors
> (see Link tag) was discouraged in favor of deleting the
> handling of the update GPIO altogehter since there are
> no in-tree users.
> 
> This patch deletes the GPIO handling instead.
> 
> Cc: Richard Fitzgerald <rf@opensource.cirrus.com>
> Cc: Charles Keepax <ckeepax@opensource.cirrus.com>
> Cc: Mark Brown <broonie@kernel.org>
> Link: https://lore.kernel.org/linux-watchdog/20200210102209.289379-1-linus.walleij@linaro.org/
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Reviewed-by: Guenter Roeck <linux@roeck-us.net>

> ---
> I am also fine with the elder patch being applied, obviously.
> ---
>  drivers/watchdog/wm831x_wdt.c    | 27 ---------------------------
>  include/linux/mfd/wm831x/pdata.h |  1 -
>  2 files changed, 28 deletions(-)
> 
> diff --git a/drivers/watchdog/wm831x_wdt.c b/drivers/watchdog/wm831x_wdt.c
> index 030ce240620d..d96ad8f38bd2 100644
> --- a/drivers/watchdog/wm831x_wdt.c
> +++ b/drivers/watchdog/wm831x_wdt.c
> @@ -13,7 +13,6 @@
>  #include <linux/platform_device.h>
>  #include <linux/watchdog.h>
>  #include <linux/uaccess.h>
> -#include <linux/gpio.h>
>  
>  #include <linux/mfd/wm831x/core.h>
>  #include <linux/mfd/wm831x/pdata.h>
> @@ -29,7 +28,6 @@ struct wm831x_wdt_drvdata {
>  	struct watchdog_device wdt;
>  	struct wm831x *wm831x;
>  	struct mutex lock;
> -	int update_gpio;
>  	int update_state;
>  };
>  
> @@ -103,14 +101,6 @@ static int wm831x_wdt_ping(struct watchdog_device *wdt_dev)
>  
>  	mutex_lock(&driver_data->lock);
>  
> -	if (driver_data->update_gpio) {
> -		gpio_set_value_cansleep(driver_data->update_gpio,
> -					driver_data->update_state);
> -		driver_data->update_state = !driver_data->update_state;
> -		ret = 0;
> -		goto out;
> -	}
> -
>  	reg = wm831x_reg_read(wm831x, WM831X_WATCHDOG);
>  
>  	if (!(reg & WM831X_WDOG_RST_SRC)) {
> @@ -239,23 +229,6 @@ static int wm831x_wdt_probe(struct platform_device *pdev)
>  		reg |= pdata->secondary << WM831X_WDOG_SECACT_SHIFT;
>  		reg |= pdata->software << WM831X_WDOG_RST_SRC_SHIFT;
>  
> -		if (pdata->update_gpio) {
> -			ret = devm_gpio_request_one(dev, pdata->update_gpio,
> -						    GPIOF_OUT_INIT_LOW,
> -						    "Watchdog update");
> -			if (ret < 0) {
> -				dev_err(wm831x->dev,
> -					"Failed to request update GPIO: %d\n",
> -					ret);
> -				return ret;
> -			}
> -
> -			driver_data->update_gpio = pdata->update_gpio;
> -
> -			/* Make sure the watchdog takes hardware updates */
> -			reg |= WM831X_WDOG_RST_SRC;
> -		}
> -
>  		ret = wm831x_reg_unlock(wm831x);
>  		if (ret == 0) {
>  			ret = wm831x_reg_write(wm831x, WM831X_WATCHDOG, reg);
> diff --git a/include/linux/mfd/wm831x/pdata.h b/include/linux/mfd/wm831x/pdata.h
> index 986986fe4e4e..75aa94dadf1c 100644
> --- a/include/linux/mfd/wm831x/pdata.h
> +++ b/include/linux/mfd/wm831x/pdata.h
> @@ -89,7 +89,6 @@ enum wm831x_watchdog_action {
>  
>  struct wm831x_watchdog_pdata {
>  	enum wm831x_watchdog_action primary, secondary;
> -	int update_gpio;
>  	unsigned int software:1;
>  };
>  
> 


  reply	other threads:[~2020-02-29 14:41 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-29 11:50 [PATCH] watchdog: wm831x_wdt: Remove GPIO handling Linus Walleij
2020-02-29 14:40 ` Guenter Roeck [this message]
2020-03-02  9:15 ` Charles Keepax

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=0c32eef6-89e9-e826-e68a-7cd00468c4c7@roeck-us.net \
    --to=linux@roeck-us.net \
    --cc=broonie@kernel.org \
    --cc=ckeepax@opensource.cirrus.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-watchdog@vger.kernel.org \
    --cc=rf@opensource.cirrus.com \
    --cc=wim@linux-watchdog.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).