Linux-Watchdog Archive on lore.kernel.org
 help / color / Atom feed
From: Anson Huang <Anson.Huang@nxp.com>
To: wim@linux-watchdog.org, linux@roeck-us.net, shawnguo@kernel.org,
	s.hauer@pengutronix.de, kernel@pengutronix.de,
	festevam@gmail.com, linux-watchdog@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Cc: Linux-imx@nxp.com
Subject: [PATCH V3 1/2] watchdog: imx7ulp: Strictly follow the sequence for wdog operations
Date: Thu, 30 Jul 2020 10:03:10 +0800
Message-ID: <1596074591-4207-1-git-send-email-Anson.Huang@nxp.com> (raw)

According to reference manual, the i.MX7ULP WDOG's operations except
refresh should follow below sequence:

1. disable global interrupts;
2. unlock the wdog and wait unlock bit set;
3. reconfigure the wdog and wait for reconfiguration bit set;
4. enabel global interrupts.

Strictly follow the recommended sequence can make it more robust.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
changes since V2:
	- change the wait timeout to 20us according to experiment;
	- drop WARN_ON when timeout, and check its return value in each caller for
	  unlock wait, no need to handle the return value for reconfiguration.
---
 drivers/watchdog/imx7ulp_wdt.c | 74 ++++++++++++++++++++++++++++++++++--------
 1 file changed, 61 insertions(+), 13 deletions(-)

diff --git a/drivers/watchdog/imx7ulp_wdt.c b/drivers/watchdog/imx7ulp_wdt.c
index 7993c8c..010ddd1 100644
--- a/drivers/watchdog/imx7ulp_wdt.c
+++ b/drivers/watchdog/imx7ulp_wdt.c
@@ -5,6 +5,7 @@
 
 #include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/iopoll.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/of.h>
@@ -36,6 +37,7 @@
 #define DEFAULT_TIMEOUT	60
 #define MAX_TIMEOUT	128
 #define WDOG_CLOCK_RATE	1000
+#define WDOG_WAIT_TIMEOUT	20
 
 static bool nowayout = WATCHDOG_NOWAYOUT;
 module_param(nowayout, bool, 0000);
@@ -48,17 +50,40 @@ struct imx7ulp_wdt_device {
 	struct clk *clk;
 };
 
-static void imx7ulp_wdt_enable(struct watchdog_device *wdog, bool enable)
+static int imx7ulp_wdt_wait(void __iomem *base, u32 mask)
+{
+	u32 val = readl(base + WDOG_CS);
+
+	if (!(val & mask) && readl_poll_timeout_atomic(base + WDOG_CS, val,
+						       val & mask, 0,
+						       WDOG_WAIT_TIMEOUT))
+		return -ETIMEDOUT;
+
+	return 0;
+}
+
+static int imx7ulp_wdt_enable(struct watchdog_device *wdog, bool enable)
 {
 	struct imx7ulp_wdt_device *wdt = watchdog_get_drvdata(wdog);
 
 	u32 val = readl(wdt->base + WDOG_CS);
+	int ret;
 
+	local_irq_disable();
 	writel(UNLOCK, wdt->base + WDOG_CNT);
+	ret = imx7ulp_wdt_wait(wdt->base, WDOG_CS_ULK);
+	if (ret)
+		goto enable_out;
 	if (enable)
 		writel(val | WDOG_CS_EN, wdt->base + WDOG_CS);
 	else
 		writel(val & ~WDOG_CS_EN, wdt->base + WDOG_CS);
+	imx7ulp_wdt_wait(wdt->base, WDOG_CS_RCS);
+
+enable_out:
+	local_irq_enable();
+
+	return ret;
 }
 
 static bool imx7ulp_wdt_is_enabled(void __iomem *base)
@@ -79,17 +104,12 @@ static int imx7ulp_wdt_ping(struct watchdog_device *wdog)
 
 static int imx7ulp_wdt_start(struct watchdog_device *wdog)
 {
-
-	imx7ulp_wdt_enable(wdog, true);
-
-	return 0;
+	return imx7ulp_wdt_enable(wdog, true);
 }
 
 static int imx7ulp_wdt_stop(struct watchdog_device *wdog)
 {
-	imx7ulp_wdt_enable(wdog, false);
-
-	return 0;
+	return imx7ulp_wdt_enable(wdog, false);
 }
 
 static int imx7ulp_wdt_set_timeout(struct watchdog_device *wdog,
@@ -97,22 +117,37 @@ static int imx7ulp_wdt_set_timeout(struct watchdog_device *wdog,
 {
 	struct imx7ulp_wdt_device *wdt = watchdog_get_drvdata(wdog);
 	u32 val = WDOG_CLOCK_RATE * timeout;
+	int ret;
 
+	local_irq_disable();
 	writel(UNLOCK, wdt->base + WDOG_CNT);
+	ret = imx7ulp_wdt_wait(wdt->base, WDOG_CS_ULK);
+	if (ret)
+		goto timeout_out;
 	writel(val, wdt->base + WDOG_TOVAL);
+	imx7ulp_wdt_wait(wdt->base, WDOG_CS_RCS);
+
+timeout_out:
+	local_irq_enable();
 
 	wdog->timeout = timeout;
 
-	return 0;
+	return ret;
 }
 
 static int imx7ulp_wdt_restart(struct watchdog_device *wdog,
 			       unsigned long action, void *data)
 {
 	struct imx7ulp_wdt_device *wdt = watchdog_get_drvdata(wdog);
+	int ret;
+
+	ret = imx7ulp_wdt_enable(wdog, true);
+	if (ret)
+		return ret;
 
-	imx7ulp_wdt_enable(wdog, true);
-	imx7ulp_wdt_set_timeout(&wdt->wdd, 1);
+	ret = imx7ulp_wdt_set_timeout(&wdt->wdd, 1);
+	if (ret)
+		return ret;
 
 	/* wait for wdog to fire */
 	while (true)
@@ -136,19 +171,30 @@ static const struct watchdog_info imx7ulp_wdt_info = {
 		    WDIOF_MAGICCLOSE,
 };
 
-static void imx7ulp_wdt_init(void __iomem *base, unsigned int timeout)
+static int imx7ulp_wdt_init(void __iomem *base, unsigned int timeout)
 {
 	u32 val;
+	int ret;
 
+	local_irq_disable();
 	/* unlock the wdog for reconfiguration */
 	writel_relaxed(UNLOCK_SEQ0, base + WDOG_CNT);
 	writel_relaxed(UNLOCK_SEQ1, base + WDOG_CNT);
+	ret = imx7ulp_wdt_wait(base, WDOG_CS_ULK);
+	if (ret)
+		goto init_out;
 
 	/* set an initial timeout value in TOVAL */
 	writel(timeout, base + WDOG_TOVAL);
 	/* enable 32bit command sequence and reconfigure */
 	val = WDOG_CS_CMD32EN | WDOG_CS_CLK | WDOG_CS_UPDATE;
 	writel(val, base + WDOG_CS);
+	imx7ulp_wdt_wait(base, WDOG_CS_RCS);
+
+init_out:
+	local_irq_enable();
+
+	return ret;
 }
 
 static void imx7ulp_wdt_action(void *data)
@@ -199,7 +245,9 @@ static int imx7ulp_wdt_probe(struct platform_device *pdev)
 	watchdog_stop_on_reboot(wdog);
 	watchdog_stop_on_unregister(wdog);
 	watchdog_set_drvdata(wdog, imx7ulp_wdt);
-	imx7ulp_wdt_init(imx7ulp_wdt->base, wdog->timeout * WDOG_CLOCK_RATE);
+	ret = imx7ulp_wdt_init(imx7ulp_wdt->base, wdog->timeout * WDOG_CLOCK_RATE);
+	if (ret)
+		return ret;
 
 	return devm_watchdog_register_device(dev, wdog);
 }
-- 
2.7.4


             reply index

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-30  2:03 Anson Huang [this message]
2020-07-30  2:03 ` [PATCH V3 2/2] watchdog: imx7ulp: Watchdog should continue running for wait/stop mode Anson Huang
2020-07-30 16:53   ` Guenter Roeck
2020-07-30 16:52 ` [PATCH V3 1/2] watchdog: imx7ulp: Strictly follow the sequence for wdog operations Guenter Roeck
2020-07-30 22:48   ` Anson Huang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1596074591-4207-1-git-send-email-Anson.Huang@nxp.com \
    --to=anson.huang@nxp.com \
    --cc=Linux-imx@nxp.com \
    --cc=festevam@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-watchdog@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    --cc=wim@linux-watchdog.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Watchdog Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-watchdog/0 linux-watchdog/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-watchdog linux-watchdog/ https://lore.kernel.org/linux-watchdog \
		linux-watchdog@vger.kernel.org
	public-inbox-index linux-watchdog

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-watchdog


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git