linux-watchdog.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Linus Walleij <linus.walleij@linaro.org>
To: Wim Van Sebroeck <wim@linux-watchdog.org>,
	Guenter Roeck <linux@roeck-us.net>
Cc: linux-watchdog@vger.kernel.org,
	Linus Walleij <linus.walleij@linaro.org>,
	Johannes Thumshirn <jthumshirn@suse.de>,
	Johannes Thumshirn <morbidrsa@gmail.com>,
	Johannes Thumshirn <jth@kernel.org>
Subject: [PATCH] watchdog: mena21_wdt: Convert to GPIO descriptors
Date: Sun,  2 Dec 2018 12:04:10 +0100	[thread overview]
Message-ID: <20181202110410.17562-1-linus.walleij@linaro.org> (raw)

This drops the old OF API use to look up global GPIO
numbers and replace it with the GPIO descriptor API.

Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Johannes Thumshirn <morbidrsa@gmail.com>
Cc: Johannes Thumshirn <jth@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
 drivers/watchdog/mena21_wdt.c | 73 +++++++++++++++++------------------
 1 file changed, 36 insertions(+), 37 deletions(-)

diff --git a/drivers/watchdog/mena21_wdt.c b/drivers/watchdog/mena21_wdt.c
index 0be7f50e8ff9..6db69883ece6 100644
--- a/drivers/watchdog/mena21_wdt.c
+++ b/drivers/watchdog/mena21_wdt.c
@@ -13,10 +13,10 @@
 #include <linux/platform_device.h>
 #include <linux/watchdog.h>
 #include <linux/uaccess.h>
-#include <linux/gpio.h>
-#include <linux/of_gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/delay.h>
 #include <linux/bitops.h>
+#include <linux/of.h>
 
 #define NUM_GPIOS 6
 
@@ -31,7 +31,7 @@ enum a21_wdt_gpios {
 
 struct a21_wdt_drv {
 	struct watchdog_device wdt;
-	unsigned gpios[NUM_GPIOS];
+	struct gpio_desc *gpios[NUM_GPIOS];
 };
 
 static bool nowayout = WATCHDOG_NOWAYOUT;
@@ -43,9 +43,9 @@ static unsigned int a21_wdt_get_bootstatus(struct a21_wdt_drv *drv)
 {
 	int reset = 0;
 
-	reset |= gpio_get_value(drv->gpios[GPIO_WD_RST0]) ? (1 << 0) : 0;
-	reset |= gpio_get_value(drv->gpios[GPIO_WD_RST1]) ? (1 << 1) : 0;
-	reset |= gpio_get_value(drv->gpios[GPIO_WD_RST2]) ? (1 << 2) : 0;
+	reset |= gpiod_get_value(drv->gpios[GPIO_WD_RST0]) ? (1 << 0) : 0;
+	reset |= gpiod_get_value(drv->gpios[GPIO_WD_RST1]) ? (1 << 1) : 0;
+	reset |= gpiod_get_value(drv->gpios[GPIO_WD_RST2]) ? (1 << 2) : 0;
 
 	return reset;
 }
@@ -54,7 +54,7 @@ static int a21_wdt_start(struct watchdog_device *wdt)
 {
 	struct a21_wdt_drv *drv = watchdog_get_drvdata(wdt);
 
-	gpio_set_value(drv->gpios[GPIO_WD_ENAB], 1);
+	gpiod_set_value(drv->gpios[GPIO_WD_ENAB], 1);
 
 	return 0;
 }
@@ -63,7 +63,7 @@ static int a21_wdt_stop(struct watchdog_device *wdt)
 {
 	struct a21_wdt_drv *drv = watchdog_get_drvdata(wdt);
 
-	gpio_set_value(drv->gpios[GPIO_WD_ENAB], 0);
+	gpiod_set_value(drv->gpios[GPIO_WD_ENAB], 0);
 
 	return 0;
 }
@@ -72,9 +72,9 @@ static int a21_wdt_ping(struct watchdog_device *wdt)
 {
 	struct a21_wdt_drv *drv = watchdog_get_drvdata(wdt);
 
-	gpio_set_value(drv->gpios[GPIO_WD_TRIG], 0);
+	gpiod_set_value(drv->gpios[GPIO_WD_TRIG], 0);
 	ndelay(10);
-	gpio_set_value(drv->gpios[GPIO_WD_TRIG], 1);
+	gpiod_set_value(drv->gpios[GPIO_WD_TRIG], 1);
 
 	return 0;
 }
@@ -96,9 +96,9 @@ static int a21_wdt_set_timeout(struct watchdog_device *wdt,
 	}
 
 	if (timeout == 1)
-		gpio_set_value(drv->gpios[GPIO_WD_FAST], 1);
+		gpiod_set_value(drv->gpios[GPIO_WD_FAST], 1);
 	else
-		gpio_set_value(drv->gpios[GPIO_WD_FAST], 0);
+		gpiod_set_value(drv->gpios[GPIO_WD_FAST], 0);
 
 	wdt->timeout = timeout;
 
@@ -127,7 +127,6 @@ static struct watchdog_device a21_wdt = {
 
 static int a21_wdt_probe(struct platform_device *pdev)
 {
-	struct device_node *node;
 	struct a21_wdt_drv *drv;
 	unsigned int reset = 0;
 	int num_gpios;
@@ -138,40 +137,40 @@ static int a21_wdt_probe(struct platform_device *pdev)
 	if (!drv)
 		return -ENOMEM;
 
-	/* Fill GPIO pin array */
-	node = pdev->dev.of_node;
-
-	num_gpios = of_gpio_count(node);
+	num_gpios = gpiod_count(&pdev->dev, NULL);
 	if (num_gpios != NUM_GPIOS) {
 		dev_err(&pdev->dev, "gpios DT property wrong, got %d want %d",
 			num_gpios, NUM_GPIOS);
 		return -ENODEV;
 	}
 
-	for (i = 0; i < num_gpios; i++) {
-		int val;
-
-		val = of_get_gpio(node, i);
-		if (val < 0)
-			return val;
-
-		drv->gpios[i] = val;
-	}
-
 	/* Request the used GPIOs */
 	for (i = 0; i < num_gpios; i++) {
-		ret = devm_gpio_request(&pdev->dev, drv->gpios[i],
-					"MEN A21 Watchdog");
-		if (ret)
-			return ret;
+		enum gpiod_flags gflags;
 
 		if (i < GPIO_WD_RST0)
-			ret = gpio_direction_output(drv->gpios[i],
-						gpio_get_value(drv->gpios[i]));
-		else		/* GPIO_WD_RST[0..2] are inputs */
-			ret = gpio_direction_input(drv->gpios[i]);
-		if (ret)
+			gflags = GPIOD_ASIS;
+		else
+			gflags = GPIOD_IN;
+		drv->gpios[i] = devm_gpiod_get_index(&pdev->dev, NULL, i,
+						     gflags);
+		if (IS_ERR(drv->gpios[i])) {
+			ret = PTR_ERR(drv->gpios[i]);
 			return ret;
+		}
+
+		gpiod_set_consumer_name(drv->gpios[i], "MEN A21 Watchdog");
+
+		/*
+		 * Retrieve the initial value from the GPIOs that should be
+		 * output, then set up the line as output with that value.
+		 */
+		if (i < GPIO_WD_RST0) {
+			int val;
+
+			val = gpiod_get_value(drv->gpios[i]);
+			gpiod_direction_output(drv->gpios[i], val);
+		}
 	}
 
 	watchdog_init_timeout(&a21_wdt, 30, &pdev->dev);
@@ -207,7 +206,7 @@ static void a21_wdt_shutdown(struct platform_device *pdev)
 {
 	struct a21_wdt_drv *drv = dev_get_drvdata(&pdev->dev);
 
-	gpio_set_value(drv->gpios[GPIO_WD_ENAB], 0);
+	gpiod_set_value(drv->gpios[GPIO_WD_ENAB], 0);
 }
 
 static const struct of_device_id a21_wdt_ids[] = {
-- 
2.19.1

             reply	other threads:[~2018-12-02 11:06 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-12-02 11:04 Linus Walleij [this message]
2018-12-03  8:12 ` [PATCH] watchdog: mena21_wdt: Convert to GPIO descriptors Johannes Thumshirn
2018-12-05 12:21   ` Linus Walleij
2018-12-15 16:28 ` Guenter Roeck

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181202110410.17562-1-linus.walleij@linaro.org \
    --to=linus.walleij@linaro.org \
    --cc=jth@kernel.org \
    --cc=jthumshirn@suse.de \
    --cc=linux-watchdog@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=morbidrsa@gmail.com \
    --cc=wim@linux-watchdog.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).