From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: linux-watchdog@vger.kernel.org
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>,
Chris Healy <cphealy@gmail.com>,
Guenter Roeck <linux@roeck-us.net>,
Rick Ramstetter <rick@anteaterllc.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH v2 07/22] watchdog: ziirave_wdt: Check packet length only once
Date: Mon, 12 Aug 2019 13:08:51 -0700 [thread overview]
Message-ID: <20190812200906.31344-8-andrew.smirnov@gmail.com> (raw)
In-Reply-To: <20190812200906.31344-1-andrew.smirnov@gmail.com>
We don't need to check for packet length more than once, so drop the
extra check in ziirave_firm_upload(). While at it move the check at
the very start of __ziirave_firm_write_pkt(), as to not waste any time
preparing a packet we'll never use.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Rick Ramstetter <rick@anteaterllc.com>
Cc: linux-watchdog@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
---
drivers/watchdog/ziirave_wdt.c | 17 +++++++----------
1 file changed, 7 insertions(+), 10 deletions(-)
diff --git a/drivers/watchdog/ziirave_wdt.c b/drivers/watchdog/ziirave_wdt.c
index b2d5ff0c22fe..9d9c669b8b47 100644
--- a/drivers/watchdog/ziirave_wdt.c
+++ b/drivers/watchdog/ziirave_wdt.c
@@ -253,6 +253,13 @@ static int __ziirave_firm_write_pkt(struct watchdog_device *wdd,
u8 i, checksum = 0, packet[ZIIRAVE_FIRM_PKT_TOTAL_SIZE];
int ret;
+ /* Check max data size */
+ if (len > ZIIRAVE_FIRM_PKT_DATA_SIZE) {
+ dev_err(&client->dev, "Firmware packet too long (%d)\n",
+ len);
+ return -EMSGSIZE;
+ }
+
memset(packet, 0, ARRAY_SIZE(packet));
/* Packet length */
@@ -261,9 +268,6 @@ static int __ziirave_firm_write_pkt(struct watchdog_device *wdd,
packet[1] = addr16 & 0xff;
packet[2] = (addr16 & 0xff00) >> 8;
- /* Packet data */
- if (len > ZIIRAVE_FIRM_PKT_DATA_SIZE)
- return -EMSGSIZE;
memcpy(packet + 3, data, len);
/* Packet checksum */
@@ -382,13 +386,6 @@ static int ziirave_firm_upload(struct watchdog_device *wdd,
if (!be16_to_cpu(rec->len))
break;
- /* Check max data size */
- if (be16_to_cpu(rec->len) > ZIIRAVE_FIRM_PKT_DATA_SIZE) {
- dev_err(&client->dev, "Firmware packet too long (%d)\n",
- be16_to_cpu(rec->len));
- return -EMSGSIZE;
- }
-
ret = ziirave_firm_write_pkt(wdd, be32_to_cpu(rec->addr),
rec->data, be16_to_cpu(rec->len));
if (ret)
--
2.21.0
next prev parent reply other threads:[~2019-08-12 20:10 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-12 20:08 [PATCH v2 00/22] Ziirave_wdt driver fixes Andrey Smirnov
2019-08-12 20:08 ` [PATCH v2 01/22] watchdog: ziirave_wdt: Add missing newline Andrey Smirnov
2019-08-12 20:08 ` [PATCH v2 02/22] watchdog: ziirave_wdt: Be verbose about errors in probe() Andrey Smirnov
2019-08-12 20:08 ` [PATCH v2 03/22] watchdog: ziirave_wdt: Be more verbose during firmware update Andrey Smirnov
2019-08-12 20:08 ` [PATCH v2 04/22] watchdog: ziirave_wdt: Don't bail out on unexpected timeout value Andrey Smirnov
2019-08-15 18:12 ` Guenter Roeck
2019-08-12 20:08 ` [PATCH v2 05/22] watchdog: ziirave_wdt: Log bootloader/firmware info during probe Andrey Smirnov
2019-08-12 20:08 ` [PATCH v2 06/22] watchdog: ziirave_wdt: Simplify ziirave_firm_write_pkt() Andrey Smirnov
2019-08-15 18:14 ` Guenter Roeck
2019-08-12 20:08 ` Andrey Smirnov [this message]
2019-08-15 18:14 ` [PATCH v2 07/22] watchdog: ziirave_wdt: Check packet length only once Guenter Roeck
2019-08-12 20:08 ` [PATCH v2 08/22] watchdog: ziirave_wdt: Skip zeros when calculating checksum Andrey Smirnov
2019-08-15 18:16 ` Guenter Roeck
2019-08-12 20:08 ` [PATCH v2 09/22] watchdog: ziirave_wdt: Fix incorrect use of ARRAY_SIZE Andrey Smirnov
2019-08-15 18:17 ` Guenter Roeck
2019-08-12 20:08 ` [PATCH v2 10/22] watchdog: ziirave_wdt: Zero out only what's necessary Andrey Smirnov
2019-08-15 18:17 ` Guenter Roeck
2019-08-12 20:08 ` [PATCH v2 11/22] watchdog: ziirave_wdt: Make use of put_unaligned_le16 Andrey Smirnov
2019-08-15 18:18 ` Guenter Roeck
2019-08-12 20:08 ` [PATCH v2 12/22] watchdog: ziirave_wdt: Don't check if ihex record length is zero Andrey Smirnov
2019-08-15 18:19 ` Guenter Roeck
2019-08-12 20:08 ` [PATCH v2 13/22] watchdog: ziirave_wdt: Don't read out more than 'len' firmware bytes Andrey Smirnov
2019-08-15 18:19 ` Guenter Roeck
2019-08-12 20:08 ` [PATCH v2 14/22] watchdog: ziirave_wdt: Don't try to program readonly flash Andrey Smirnov
2019-08-15 18:21 ` Guenter Roeck
2019-08-12 20:08 ` [PATCH v2 15/22] watchdog: ziirave_wdt: Fix misleading error message Andrey Smirnov
2019-08-15 18:22 ` Guenter Roeck
2019-08-12 20:09 ` [PATCH v2 16/22] watchdog: ziirave_wdt: Fix JUMP_TO_BOOTLOADER payload Andrey Smirnov
2019-08-15 18:22 ` Guenter Roeck
2019-08-12 20:09 ` [PATCH v2 17/22] watchdog: ziirave_wdt: Fix DOWNLOAD_END payload Andrey Smirnov
2019-08-15 18:23 ` Guenter Roeck
2019-08-12 20:09 ` [PATCH v2 18/22] watchdog: ziirave_wdt: Fix RESET_PROCESSOR payload Andrey Smirnov
2019-08-15 18:23 ` Guenter Roeck
2019-08-12 20:09 ` [PATCH v2 19/22] watchdog: ziirave_wdt: Drop status polling code Andrey Smirnov
2019-08-15 18:24 ` Guenter Roeck
2019-08-12 20:09 ` [PATCH v2 20/22] watchdog: ziirave_wdt: Fix DOWNLOAD_START payload Andrey Smirnov
2019-08-15 18:24 ` Guenter Roeck
2019-08-12 20:09 ` [PATCH v2 21/22] watchdog: ziirave_wdt: Drop ziirave_firm_write_block_data() Andrey Smirnov
2019-08-15 18:25 ` Guenter Roeck
2019-08-12 20:09 ` [PATCH v2 22/22] watchdog: ziirave_wdt: Update checked I2C functionality mask Andrey Smirnov
2019-08-15 18:25 ` Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190812200906.31344-8-andrew.smirnov@gmail.com \
--to=andrew.smirnov@gmail.com \
--cc=cphealy@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=rick@anteaterllc.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).