From: Wim Van Sebroeck <wim@linux-watchdog.org>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>,
LKML <linux-kernel@vger.kernel.org>,
Linux Watchdog Mailing List <linux-watchdog@vger.kernel.org>,
Guenter Roeck <linux@roeck-us.net>,
Jaret Cantu <jaret.cantu@timesys.com>,
Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>,
Oliver Graute <oliver.graute@kococonnector.com>,
Ivan Mikhaylov <i.mikhaylov@yadro.com>,
Chris Packham <chris.packham@alliedtelesis.co.nz>,
Anson Huang <Anson.Huang@nxp.com>,
Maxime Ripard <maxime.ripard@bootlin.com>,
Ryan Chen <ryan_chen@aspeedtech.com>,
Joel Stanley <joel@jms.id.au>,
Andrey Smirnov <andrew.smirnov@gmail.com>,
Rasmus Villemoes <linux@rasmusvillemoes.dk>,
Arnd Bergmann <arnd@arndb.de>,
"Gustavo A. R. Silva" <gustavo@embeddedor.com>,
Stephen Boyd <swboyd@chromium.org>,
Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Subject: [GIT PULL REQUEST] watchdog - v5.4 Merge window
Date: Fri, 27 Sep 2019 09:15:27 +0200 [thread overview]
Message-ID: <20190927071527.GA14507@www.linux-watchdog.org> (raw)
Hi Linus,
My apologies for the delay.
Please pull the watchdog changes for the v5.4 release cycle.
This series contains:
* addition of AST2600, i.MX7ULP and F81803 watchdog support
* removal of the w90x900 and ks8695 drivers
* ziirave_wdt improvements
* small fixes and improvements
The output from git request-pull:
----------------------------------------------------------------
The following changes since commit ad5e427e0f6b702e52c11d1f7b2b7be3bac7de82:
Merge branch 'parisc-5.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux (2019-07-23 15:34:59 -0700)
are available in the git repository at:
git://www.linux-watchdog.org/linux-watchdog.git tags/linux-watchdog-5.4-rc1
for you to fetch changes up to ca2fc5efffde5a3827adfb0ab6a51b6f1c64d5ff:
watchdog: f71808e_wdt: Add F81803 support (2019-09-17 08:59:14 +0200)
----------------------------------------------------------------
linux-watchdog 5.4-rc1 tag
----------------------------------------------------------------
Andrey Smirnov (22):
watchdog: ziirave_wdt: Add missing newline
watchdog: ziirave_wdt: Be verbose about errors in probe()
watchdog: ziirave_wdt: Be more verbose during firmware update
watchdog: ziirave_wdt: Don't bail out on unexpected timeout value
watchdog: ziirave_wdt: Log bootloader/firmware info during probe
watchdog: ziirave_wdt: Simplify ziirave_firm_write_pkt()
watchdog: ziirave_wdt: Check packet length only once
watchdog: ziirave_wdt: Skip zeros when calculating checksum
watchdog: ziirave_wdt: Fix incorrect use of ARRAY_SIZE
watchdog: ziirave_wdt: Zero out only what's necessary
watchdog: ziirave_wdt: Make use of put_unaligned_le16
watchdog: ziirave_wdt: Don't check if ihex record length is zero
watchdog: ziirave_wdt: Don't read out more than 'len' firmware bytes
watchdog: ziirave_wdt: Don't try to program readonly flash
watchdog: ziirave_wdt: Fix misleading error message
watchdog: ziirave_wdt: Fix JUMP_TO_BOOTLOADER payload
watchdog: ziirave_wdt: Fix DOWNLOAD_END payload
watchdog: ziirave_wdt: Fix RESET_PROCESSOR payload
watchdog: ziirave_wdt: Drop status polling code
watchdog: ziirave_wdt: Fix DOWNLOAD_START payload
watchdog: ziirave_wdt: Drop ziirave_firm_write_block_data()
watchdog: ziirave_wdt: Update checked I2C functionality mask
Anson Huang (3):
watchdog: imx_sc: Remove unnecessary error log
dt-bindings: watchdog: Add i.MX7ULP bindings
watchdog: Add i.MX7ULP watchdog support
Arnd Bergmann (4):
watchdog: pnx4008_wdt: allow compile-testing
watchdog: remove ks8695 driver
watchdog: remove w90x900 driver
watchdog: cpwd: use generic compat_ptr_ioctl
Chris Packham (1):
watchdog: orion_wdt: use timer1 as a pretimeout
Christophe JAILLET (1):
watchdog: ath79_wdt: fix a typo in the name of a function
Guenter Roeck (1):
watchdog: diag288_wdt: Remove leftover includes from conversion to watchdog API
Gustavo A. R. Silva (5):
watchdog: Mark expected switch fall-throughs
watchdog: scx200_wdt: Mark expected switch fall-through
watchdog: wdt977: Mark expected switch fall-through
watchdog: riowd: Mark expected switch fall-through
watchdog: jz4740: Fix unused variable warning in jz4740_wdt_probe
Ivan Mikhaylov (2):
watchdog: aspeed: add support for dual boot
watchdog: apseed: Add access_cs0 option for alt-boot
Jaret Cantu (1):
watchdog: f71808e_wdt: Add F81803 support
Joel Stanley (1):
dt-bindings: watchdog: Add ast2600 compatible
Jorge Ramirez-Ortiz (2):
watchdog: qcom: support pre-timeout when the bark irq is available
watchdog: qcom: remove unnecessary variable from private storage
Maxime Ripard (4):
dt-bindings: watchdog: Add YAML schemas for the generic watchdog bindings
dt-bindings: watchdog: Convert Allwinner watchdog to a schema
dt-bindings: watchdog: sun4i: Add the watchdog interrupts
dt-bindings: watchdog: sun4i: Add the watchdog clock
Oliver Graute (1):
watchdog: imx_sc: this patch just fixes whitespaces
Rasmus Villemoes (1):
watchdog: imx2_wdt: fix min() calculation in imx2_wdt_set_timeout
Ryan Chen (1):
watchdog: aspeed: Add support for AST2600
Stephen Boyd (1):
watchdog: Remove dev_err() usage after platform_get_irq()
Documentation/ABI/testing/sysfs-class-watchdog | 34 ++
.../bindings/watchdog/allwinner,sun4i-a10-wdt.yaml | 58 ++++
.../devicetree/bindings/watchdog/aspeed-wdt.txt | 1 +
.../bindings/watchdog/fsl-imx7ulp-wdt.txt | 22 ++
.../devicetree/bindings/watchdog/sunxi-wdt.txt | 22 --
.../devicetree/bindings/watchdog/watchdog.yaml | 26 ++
Documentation/watchdog/watchdog-parameters.rst | 19 --
drivers/watchdog/Kconfig | 35 +-
drivers/watchdog/Makefile | 3 +-
drivers/watchdog/ar7_wdt.c | 1 +
drivers/watchdog/aspeed_wdt.c | 69 +++-
drivers/watchdog/ath79_wdt.c | 4 +-
drivers/watchdog/cpwd.c | 25 +-
drivers/watchdog/diag288_wdt.c | 3 -
drivers/watchdog/f71808e_wdt.c | 17 +-
drivers/watchdog/imx2_wdt.c | 4 +-
drivers/watchdog/imx7ulp_wdt.c | 243 ++++++++++++++
drivers/watchdog/imx_sc_wdt.c | 9 +-
drivers/watchdog/jz4740_wdt.c | 1 -
drivers/watchdog/ks8695_wdt.c | 319 -------------------
drivers/watchdog/nuc900_wdt.c | 302 ------------------
drivers/watchdog/orion_wdt.c | 66 +++-
drivers/watchdog/pcwd.c | 2 +-
drivers/watchdog/pnx4008_wdt.c | 1 -
drivers/watchdog/qcom-wdt.c | 84 ++++-
drivers/watchdog/riowd.c | 2 +-
drivers/watchdog/sb_wdog.c | 1 +
drivers/watchdog/scx200_wdt.c | 1 +
drivers/watchdog/sprd_wdt.c | 4 +-
drivers/watchdog/wdt.c | 2 +-
drivers/watchdog/wdt977.c | 2 +-
drivers/watchdog/ziirave_wdt.c | 351 ++++++++++-----------
32 files changed, 797 insertions(+), 936 deletions(-)
create mode 100644 Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml
create mode 100644 Documentation/devicetree/bindings/watchdog/fsl-imx7ulp-wdt.txt
delete mode 100644 Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt
create mode 100644 Documentation/devicetree/bindings/watchdog/watchdog.yaml
create mode 100644 drivers/watchdog/imx7ulp_wdt.c
delete mode 100644 drivers/watchdog/ks8695_wdt.c
delete mode 100644 drivers/watchdog/nuc900_wdt.c
----------------------------------------------------------------
Kind regards,
Wim.
next reply other threads:[~2019-09-27 8:02 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-09-27 7:15 Wim Van Sebroeck [this message]
2019-09-27 18:40 ` [GIT PULL REQUEST] watchdog - v5.4 Merge window pr-tracker-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190927071527.GA14507@www.linux-watchdog.org \
--to=wim@linux-watchdog.org \
--cc=Anson.Huang@nxp.com \
--cc=akpm@linux-foundation.org \
--cc=andrew.smirnov@gmail.com \
--cc=arnd@arndb.de \
--cc=chris.packham@alliedtelesis.co.nz \
--cc=christophe.jaillet@wanadoo.fr \
--cc=gustavo@embeddedor.com \
--cc=i.mikhaylov@yadro.com \
--cc=jaret.cantu@timesys.com \
--cc=joel@jms.id.au \
--cc=jorge.ramirez-ortiz@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=linux@rasmusvillemoes.dk \
--cc=linux@roeck-us.net \
--cc=maxime.ripard@bootlin.com \
--cc=oliver.graute@kococonnector.com \
--cc=ryan_chen@aspeedtech.com \
--cc=swboyd@chromium.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).