From: Florian Fainelli <f.fainelli@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: Florian Fainelli <f.fainelli@gmail.com>,
Guenter Roeck <linux@roeck-us.net>,
Wim Van Sebroeck <wim@linux-watchdog.org>,
Rob Herring <robh+dt@kernel.org>,
Thomas Bogendoerfer <tsbogend@alpha.franken.de>,
bcm-kernel-feedback-list@broadcom.com (maintainer:BROADCOM
BCM63XX ARM ARCHITECTURE), Justin Chen <justinpopo6@gmail.com>,
linux-watchdog@vger.kernel.org (open list:WATCHDOG DEVICE
DRIVERS),
devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND
FLATTENED DEVICE TREE BINDINGS),
linux-mips@vger.kernel.org (open list:MIPS),
linux-arm-kernel@lists.infradead.org (moderated list:BROADCOM
BCM63XX ARM ARCHITECTURE)
Subject: [PATCH v3 3/7] watchdog: bcm7038_wdt: Support platform data configuration
Date: Wed, 3 Nov 2021 16:13:23 -0700 [thread overview]
Message-ID: <20211103231327.385186-4-f.fainelli@gmail.com> (raw)
In-Reply-To: <20211103231327.385186-1-f.fainelli@gmail.com>
The BCM7038 watchdog driver needs to be able to obtain a specific clock
name on BCM63xx platforms which is the "periph" clock ticking at 50MHz.
make it possible to specify the clock name to obtain via platform data.
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
drivers/watchdog/bcm7038_wdt.c | 8 +++++++-
include/linux/platform_data/bcm7038_wdt.h | 8 ++++++++
2 files changed, 15 insertions(+), 1 deletion(-)
create mode 100644 include/linux/platform_data/bcm7038_wdt.h
diff --git a/drivers/watchdog/bcm7038_wdt.c b/drivers/watchdog/bcm7038_wdt.c
index acaaa0005d5b..506cd7ef9c77 100644
--- a/drivers/watchdog/bcm7038_wdt.c
+++ b/drivers/watchdog/bcm7038_wdt.c
@@ -10,6 +10,7 @@
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
+#include <linux/platform_data/bcm7038_wdt.h>
#include <linux/pm.h>
#include <linux/watchdog.h>
@@ -133,8 +134,10 @@ static void bcm7038_clk_disable_unprepare(void *data)
static int bcm7038_wdt_probe(struct platform_device *pdev)
{
+ struct bcm7038_wdt_platform_data *pdata = pdev->dev.platform_data;
struct device *dev = &pdev->dev;
struct bcm7038_watchdog *wdt;
+ const char *clk_name = NULL;
int err;
wdt = devm_kzalloc(dev, sizeof(*wdt), GFP_KERNEL);
@@ -147,7 +150,10 @@ static int bcm7038_wdt_probe(struct platform_device *pdev)
if (IS_ERR(wdt->base))
return PTR_ERR(wdt->base);
- wdt->clk = devm_clk_get(dev, NULL);
+ if (pdata && pdata->clk_name)
+ clk_name = pdata->clk_name;
+
+ wdt->clk = devm_clk_get(dev, clk_name);
/* If unable to get clock, use default frequency */
if (!IS_ERR(wdt->clk)) {
err = clk_prepare_enable(wdt->clk);
diff --git a/include/linux/platform_data/bcm7038_wdt.h b/include/linux/platform_data/bcm7038_wdt.h
new file mode 100644
index 000000000000..e18cfd9ec8f9
--- /dev/null
+++ b/include/linux/platform_data/bcm7038_wdt.h
@@ -0,0 +1,8 @@
+#ifndef __BCM7038_WDT_PDATA_H
+#define __BCM7038_WDT_PDATA_H
+
+struct bcm7038_wdt_platform_data {
+ const char *clk_name;
+};
+
+#endif /* __BCM7038_WDT_PDATA_H */
--
2.25.1
next prev parent reply other threads:[~2021-11-03 23:14 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-03 23:13 [PATCH v3 0/7] Removal of bcm63xx-wdt Florian Fainelli
2021-11-03 23:13 ` [PATCH v3 1/7] dt-bindings: watchdog: convert Broadcom's WDT to the json-schema Florian Fainelli
2021-11-04 16:12 ` Rob Herring
2021-11-04 18:39 ` Guenter Roeck
2021-11-03 23:13 ` [PATCH v3 2/7] dt-bindings: watchdog: Add BCM6345 compatible to BCM7038 binding Florian Fainelli
2021-11-03 23:13 ` Florian Fainelli [this message]
2021-11-03 23:13 ` [PATCH v3 4/7] watchdog: Allow building BCM7038_WDT for BCM63XX Florian Fainelli
2021-11-03 23:13 ` [PATCH v3 5/7] watchdog: bcm7038_wdt: Add platform device id for bcm63xx-wdt Florian Fainelli
2021-11-03 23:13 ` [PATCH v3 6/7] MIPS: BCM63XX: Provide platform data to watchdog device Florian Fainelli
2021-11-03 23:13 ` [PATCH v3 7/7] watchdog: Remove BCM63XX_WDT Florian Fainelli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211103231327.385186-4-f.fainelli@gmail.com \
--to=f.fainelli@gmail.com \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=devicetree@vger.kernel.org \
--cc=justinpopo6@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=robh+dt@kernel.org \
--cc=tsbogend@alpha.franken.de \
--cc=wim@linux-watchdog.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).