linux-watchdog.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Emil Renner Berthing <emil.renner.berthing@canonical.com>
To: Xingyu Wu <xingyu.wu@starfivetech.com>
Cc: linux-riscv@lists.infradead.org, devicetree@vger.kernel.org,
	linux-watchdog@vger.kernel.org,
	Wim Van Sebroeck <wim@linux-watchdog.org>,
	Guenter Roeck <linux@roeck-us.net>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Emil Renner Berthing <kernel@esmil.dk>,
	Conor Dooley <conor@kernel.org>, Rob Herring <robh+dt@kernel.org>,
	Paul Walmsley <paul.walmsley@sifive.com>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	Albert Ou <aou@eecs.berkeley.edu>,
	Philipp Zabel <p.zabel@pengutronix.de>,
	Samin Guo <samin.guo@starfivetech.com>,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v5 2/3] drivers: watchdog: Add StarFive Watchdog driver
Date: Wed, 29 Mar 2023 18:16:42 +0200	[thread overview]
Message-ID: <CAJM55Z_+uEo17AVzyxm69=Z0GMjv5Z17qyW2KGfh_xH5jOmNAw@mail.gmail.com> (raw)
In-Reply-To: <20230314132437.121534-3-xingyu.wu@starfivetech.com>

On Tue, 14 Mar 2023 at 14:27, Xingyu Wu <xingyu.wu@starfivetech.com> wrote:
>
> Add watchdog driver for the StarFive JH7100 and JH7110 SoC.
>
> Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>

Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>

Thanks!

> ---
>  MAINTAINERS                     |   7 +
>  drivers/watchdog/Kconfig        |  11 +
>  drivers/watchdog/Makefile       |   3 +
>  drivers/watchdog/starfive-wdt.c | 606 ++++++++++++++++++++++++++++++++
>  4 files changed, 627 insertions(+)
>  create mode 100644 drivers/watchdog/starfive-wdt.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 8d5bc223f305..721d0e4e8a0d 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -19962,6 +19962,13 @@ S:     Supported
>  F:     Documentation/devicetree/bindings/rng/starfive*
>  F:     drivers/char/hw_random/jh7110-trng.c
>
> +STARFIVE WATCHDOG DRIVER
> +M:     Xingyu Wu <xingyu.wu@starfivetech.com>
> +M:     Samin Guo <samin.guo@starfivetech.com>
> +S:     Supported
> +F:     Documentation/devicetree/bindings/watchdog/starfive*
> +F:     drivers/watchdog/starfive-wdt.c
> +
>  STATIC BRANCH/CALL
>  M:     Peter Zijlstra <peterz@infradead.org>
>  M:     Josh Poimboeuf <jpoimboe@kernel.org>
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index f0872970daf9..f22138709bf5 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -1999,6 +1999,17 @@ config WATCHDOG_RTAS
>           To compile this driver as a module, choose M here. The module
>           will be called wdrtas.
>
> +# RISC-V Architecture
> +
> +config STARFIVE_WATCHDOG
> +       tristate "StarFive Watchdog support"
> +       depends on ARCH_STARFIVE || COMPILE_TEST
> +       select WATCHDOG_CORE
> +       default ARCH_STARFIVE
> +       help
> +         Say Y here to support the watchdog of StarFive JH7100 and JH7110
> +         SoC. This driver can also be built as a module if choose M.
> +
>  # S390 Architecture
>
>  config DIAG288_WATCHDOG
> diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> index 9cbf6580f16c..b4c4ccf2d703 100644
> --- a/drivers/watchdog/Makefile
> +++ b/drivers/watchdog/Makefile
> @@ -192,6 +192,9 @@ obj-$(CONFIG_MEN_A21_WDT) += mena21_wdt.o
>  obj-$(CONFIG_PSERIES_WDT) += pseries-wdt.o
>  obj-$(CONFIG_WATCHDOG_RTAS) += wdrtas.o
>
> +# RISC-V Architecture
> +obj-$(CONFIG_STARFIVE_WATCHDOG) += starfive-wdt.o
> +
>  # S390 Architecture
>  obj-$(CONFIG_DIAG288_WATCHDOG) += diag288_wdt.o
>
> diff --git a/drivers/watchdog/starfive-wdt.c b/drivers/watchdog/starfive-wdt.c
> new file mode 100644
> index 000000000000..1995cceca51e
> --- /dev/null
> +++ b/drivers/watchdog/starfive-wdt.c
> @@ -0,0 +1,606 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Starfive Watchdog driver
> + *
> + * Copyright (C) 2022 StarFive Technology Co., Ltd.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/iopoll.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/reset.h>
> +#include <linux/watchdog.h>
> +
> +/* JH7100 Watchdog register define */
> +#define STARFIVE_WDT_JH7100_INTSTAUS   0x000
> +#define STARFIVE_WDT_JH7100_CONTROL    0x104
> +#define STARFIVE_WDT_JH7100_LOAD       0x108
> +#define STARFIVE_WDT_JH7100_EN         0x110
> +#define STARFIVE_WDT_JH7100_RELOAD     0x114   /* Write 0 or 1 to reload preset value */
> +#define STARFIVE_WDT_JH7100_VALUE      0x118
> +#define STARFIVE_WDT_JH7100_INTCLR     0x120   /*
> +                                                * [0]: Write 1 to clear interrupt
> +                                                * [1]: 1 mean clearing and 0 mean complete
> +                                                * [31:2]: reserved.
> +                                                */
> +#define STARFIVE_WDT_JH7100_LOCK       0x13c   /* write 0x378f0765 to unlock */
> +
> +/* JH7110 Watchdog register define */
> +#define STARFIVE_WDT_JH7110_LOAD       0x000
> +#define STARFIVE_WDT_JH7110_VALUE      0x004
> +#define STARFIVE_WDT_JH7110_CONTROL    0x008   /*
> +                                                * [0]: reset enable;
> +                                                * [1]: interrupt enable && watchdog enable
> +                                                * [31:2]: reserved.
> +                                                */
> +#define STARFIVE_WDT_JH7110_INTCLR     0x00c   /* clear intterupt and reload the counter */
> +#define STARFIVE_WDT_JH7110_IMS                0x014
> +#define STARFIVE_WDT_JH7110_LOCK       0xc00   /* write 0x1ACCE551 to unlock */
> +
> +/* WDOGCONTROL */
> +#define STARFIVE_WDT_ENABLE                    0x1
> +#define STARFIVE_WDT_EN_SHIFT                  0
> +#define STARFIVE_WDT_RESET_EN                  0x1
> +#define STARFIVE_WDT_JH7100_RST_EN_SHIFT       0
> +#define STARFIVE_WDT_JH7110_RST_EN_SHIFT       1
> +
> +/* WDOGLOCK */
> +#define STARFIVE_WDT_JH7100_UNLOCK_KEY         0x378f0765
> +#define STARFIVE_WDT_JH7110_UNLOCK_KEY         0x1acce551
> +
> +/* WDOGINTCLR */
> +#define STARFIVE_WDT_INTCLR                    0x1
> +#define STARFIVE_WDT_JH7100_INTCLR_AVA_SHIFT   1       /* Watchdog can clear interrupt when 0 */
> +
> +#define STARFIVE_WDT_MAXCNT                    0xffffffff
> +#define STARFIVE_WDT_DEFAULT_TIME              (15)
> +#define STARFIVE_WDT_DELAY_US                  0
> +#define STARFIVE_WDT_TIMEOUT_US                        10000
> +
> +/* module parameter */
> +#define STARFIVE_WDT_EARLY_ENA                 0
> +
> +static bool nowayout = WATCHDOG_NOWAYOUT;
> +static int heartbeat;
> +static bool early_enable = STARFIVE_WDT_EARLY_ENA;
> +
> +module_param(heartbeat, int, 0);
> +module_param(early_enable, bool, 0);
> +module_param(nowayout, bool, 0);
> +
> +MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (default="
> +                __MODULE_STRING(STARFIVE_WDT_DEFAULT_TIME) ")");
> +MODULE_PARM_DESC(early_enable,
> +                "Watchdog is started at boot time if set to 1, default="
> +                __MODULE_STRING(STARFIVE_WDT_EARLY_ENA));
> +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
> +                __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
> +
> +struct starfive_wdt_variant {
> +       unsigned int control;           /* Watchdog Control Resgister for reset enable */
> +       unsigned int load;              /* Watchdog Load register */
> +       unsigned int reload;            /* Watchdog Reload Control register */
> +       unsigned int enable;            /* Watchdog Enable Register */
> +       unsigned int value;             /* Watchdog Counter Value Register */
> +       unsigned int int_clr;           /* Watchdog Interrupt Clear Register */
> +       unsigned int unlock;            /* Watchdog Lock Register */
> +       unsigned int int_status;        /* Watchdog Interrupt Status Register */
> +
> +       u32 unlock_key;
> +       char enrst_shift;
> +       char en_shift;
> +       bool intclr_check;              /*  whether need to check it before clearing interrupt */
> +       char intclr_ava_shift;
> +       bool double_timeout;            /* The watchdog need twice timeout to reboot */
> +};
> +
> +struct starfive_wdt {
> +       struct watchdog_device wdd;
> +       spinlock_t lock;                /* spinlock for register handling */
> +       void __iomem *base;
> +       struct clk *core_clk;
> +       struct clk *apb_clk;
> +       const struct starfive_wdt_variant *variant;
> +       unsigned long freq;
> +       u32 count;                      /* count of timeout */
> +       u32 reload;                     /* restore the count */
> +};
> +
> +/* Register layout and configuration for the JH7100 */
> +static const struct starfive_wdt_variant starfive_wdt_jh7100_variant = {
> +       .control = STARFIVE_WDT_JH7100_CONTROL,
> +       .load = STARFIVE_WDT_JH7100_LOAD,
> +       .reload = STARFIVE_WDT_JH7100_RELOAD,
> +       .enable = STARFIVE_WDT_JH7100_EN,
> +       .value = STARFIVE_WDT_JH7100_VALUE,
> +       .int_clr = STARFIVE_WDT_JH7100_INTCLR,
> +       .unlock = STARFIVE_WDT_JH7100_LOCK,
> +       .unlock_key = STARFIVE_WDT_JH7100_UNLOCK_KEY,
> +       .int_status = STARFIVE_WDT_JH7100_INTSTAUS,
> +       .enrst_shift = STARFIVE_WDT_JH7100_RST_EN_SHIFT,
> +       .en_shift = STARFIVE_WDT_EN_SHIFT,
> +       .intclr_check = true,
> +       .intclr_ava_shift = STARFIVE_WDT_JH7100_INTCLR_AVA_SHIFT,
> +       .double_timeout = false,
> +};
> +
> +/* Register layout and configuration for the JH7110 */
> +static const struct starfive_wdt_variant starfive_wdt_jh7110_variant = {
> +       .control = STARFIVE_WDT_JH7110_CONTROL,
> +       .load = STARFIVE_WDT_JH7110_LOAD,
> +       .enable = STARFIVE_WDT_JH7110_CONTROL,
> +       .value = STARFIVE_WDT_JH7110_VALUE,
> +       .int_clr = STARFIVE_WDT_JH7110_INTCLR,
> +       .unlock = STARFIVE_WDT_JH7110_LOCK,
> +       .unlock_key = STARFIVE_WDT_JH7110_UNLOCK_KEY,
> +       .int_status = STARFIVE_WDT_JH7110_IMS,
> +       .enrst_shift = STARFIVE_WDT_JH7110_RST_EN_SHIFT,
> +       .en_shift = STARFIVE_WDT_EN_SHIFT,
> +       .intclr_check = false,
> +       .double_timeout = true,
> +};
> +
> +static int starfive_wdt_enable_clock(struct starfive_wdt *wdt)
> +{
> +       int ret;
> +
> +       ret = clk_prepare_enable(wdt->apb_clk);
> +       if (ret)
> +               return dev_err_probe(wdt->wdd.parent, ret, "failed to enable apb clock\n");
> +
> +       ret = clk_prepare_enable(wdt->core_clk);
> +       if (ret)
> +               return dev_err_probe(wdt->wdd.parent, ret, "failed to enable core clock\n");
> +
> +       return 0;
> +}
> +
> +static void starfive_wdt_disable_clock(struct starfive_wdt *wdt)
> +{
> +       clk_disable_unprepare(wdt->core_clk);
> +       clk_disable_unprepare(wdt->apb_clk);
> +}
> +
> +static inline int starfive_wdt_get_clock(struct starfive_wdt *wdt)
> +{
> +       struct device *dev = wdt->wdd.parent;
> +
> +       wdt->apb_clk = devm_clk_get(dev, "apb");
> +       if (IS_ERR(wdt->apb_clk))
> +               return dev_err_probe(dev, PTR_ERR(wdt->apb_clk), "failed to get apb clock\n");
> +
> +       wdt->core_clk = devm_clk_get(dev, "core");
> +       if (IS_ERR(wdt->core_clk))
> +               return dev_err_probe(dev, PTR_ERR(wdt->core_clk), "failed to get core clock\n");
> +
> +       return 0;
> +}
> +
> +static inline int starfive_wdt_reset_init(struct device *dev)
> +{
> +       struct reset_control *rsts;
> +       int ret;
> +
> +       rsts = devm_reset_control_array_get_exclusive(dev);
> +       if (IS_ERR(rsts))
> +               return dev_err_probe(dev, PTR_ERR(rsts), "failed to get resets\n");
> +
> +       ret = reset_control_deassert(rsts);
> +       if (ret)
> +               return dev_err_probe(dev, ret, "failed to deassert resets\n");
> +
> +       return 0;
> +}
> +
> +static u32 starfive_wdt_ticks_to_sec(struct starfive_wdt *wdt, u32 ticks)
> +{
> +       return DIV_ROUND_CLOSEST(ticks, wdt->freq);
> +}
> +
> +/* Write unlock-key to unlock. Write other value to lock. */
> +static void starfive_wdt_unlock(struct starfive_wdt *wdt)
> +{
> +       spin_lock(&wdt->lock);
> +       writel(wdt->variant->unlock_key, wdt->base + wdt->variant->unlock);
> +}
> +
> +static void starfive_wdt_lock(struct starfive_wdt *wdt)
> +{
> +       writel(~wdt->variant->unlock_key, wdt->base + wdt->variant->unlock);
> +       spin_unlock(&wdt->lock);
> +}
> +
> +/* enable watchdog interrupt to reset/reboot */
> +static void starfive_wdt_enable_reset(struct starfive_wdt *wdt)
> +{
> +       u32 val;
> +
> +       val = readl(wdt->base + wdt->variant->control);
> +       val |= STARFIVE_WDT_RESET_EN << wdt->variant->enrst_shift;
> +       writel(val, wdt->base + wdt->variant->control);
> +}
> +
> +/* interrupt status whether has been raised from the counter */
> +static bool starfive_wdt_raise_irq_status(struct starfive_wdt *wdt)
> +{
> +       return !!readl(wdt->base + wdt->variant->int_status);
> +}
> +
> +/* waiting interrupt can be free to clear */
> +static int starfive_wdt_wait_int_free(struct starfive_wdt *wdt)
> +{
> +       u32 value;
> +
> +       return readl_poll_timeout_atomic(wdt->base + wdt->variant->int_clr, value,
> +                                        !(value & BIT(wdt->variant->intclr_ava_shift)),
> +                                        STARFIVE_WDT_DELAY_US, STARFIVE_WDT_TIMEOUT_US);
> +}
> +
> +/* clear interrupt signal before initialization or reload */
> +static int starfive_wdt_int_clr(struct starfive_wdt *wdt)
> +{
> +       int ret;
> +
> +       if (wdt->variant->intclr_check) {
> +               ret = starfive_wdt_wait_int_free(wdt);
> +               if (ret)
> +                       return dev_err_probe(wdt->wdd.parent, ret,
> +                                            "watchdog is not ready to clear interrupt.\n");
> +       }
> +       writel(STARFIVE_WDT_INTCLR, wdt->base + wdt->variant->int_clr);
> +
> +       return 0;
> +}
> +
> +static inline void starfive_wdt_set_count(struct starfive_wdt *wdt, u32 val)
> +{
> +       writel(val, wdt->base + wdt->variant->load);
> +}
> +
> +static inline u32 starfive_wdt_get_count(struct starfive_wdt *wdt)
> +{
> +       return readl(wdt->base + wdt->variant->value);
> +}
> +
> +/* enable watchdog */
> +static inline void starfive_wdt_enable(struct starfive_wdt *wdt)
> +{
> +       u32 val;
> +
> +       val = readl(wdt->base + wdt->variant->enable);
> +       val |= STARFIVE_WDT_ENABLE << wdt->variant->en_shift;
> +       writel(val, wdt->base + wdt->variant->enable);
> +}
> +
> +/* disable watchdog */
> +static inline void starfive_wdt_disable(struct starfive_wdt *wdt)
> +{
> +       u32 val;
> +
> +       val = readl(wdt->base + wdt->variant->enable);
> +       val &= ~(STARFIVE_WDT_ENABLE << wdt->variant->en_shift);
> +       writel(val, wdt->base + wdt->variant->enable);
> +}
> +
> +static inline void starfive_wdt_set_reload_count(struct starfive_wdt *wdt, u32 count)
> +{
> +       starfive_wdt_set_count(wdt, count);
> +
> +       /* 7100 need set any value to reload register and could reload value to counter */
> +       if (wdt->variant->reload)
> +               writel(0x1, wdt->base + wdt->variant->reload);
> +}
> +
> +static unsigned int starfive_wdt_max_timeout(struct starfive_wdt *wdt)
> +{
> +       if (wdt->variant->double_timeout)
> +               return DIV_ROUND_UP(STARFIVE_WDT_MAXCNT, (wdt->freq / 2)) - 1;
> +
> +       return DIV_ROUND_UP(STARFIVE_WDT_MAXCNT, wdt->freq) - 1;
> +}
> +
> +static unsigned int starfive_wdt_get_timeleft(struct watchdog_device *wdd)
> +{
> +       struct starfive_wdt *wdt = watchdog_get_drvdata(wdd);
> +       u32 count;
> +
> +       /*
> +        * If the watchdog takes twice timeout and set half count value,
> +        * timeleft value should add the count value before first timeout.
> +        */
> +       count = starfive_wdt_get_count(wdt);
> +       if (wdt->variant->double_timeout && !starfive_wdt_raise_irq_status(wdt))
> +               count += wdt->count;
> +
> +       return starfive_wdt_ticks_to_sec(wdt, count);
> +}
> +
> +static int starfive_wdt_keepalive(struct watchdog_device *wdd)
> +{
> +       struct starfive_wdt *wdt = watchdog_get_drvdata(wdd);
> +       int ret;
> +
> +       starfive_wdt_unlock(wdt);
> +       ret = starfive_wdt_int_clr(wdt);
> +       if (ret)
> +               goto exit;
> +
> +       starfive_wdt_set_reload_count(wdt, wdt->count);
> +
> +exit:
> +       /* exit with releasing spinlock and locking registers */
> +       starfive_wdt_lock(wdt);
> +       return ret;
> +}
> +
> +static int starfive_wdt_start(struct starfive_wdt *wdt)
> +{
> +       int ret;
> +
> +       starfive_wdt_unlock(wdt);
> +       /* disable watchdog, to be safe */
> +       starfive_wdt_disable(wdt);
> +
> +       starfive_wdt_enable_reset(wdt);
> +       ret = starfive_wdt_int_clr(wdt);
> +       if (ret)
> +               goto exit;
> +
> +       starfive_wdt_set_count(wdt, wdt->count);
> +       starfive_wdt_enable(wdt);
> +
> +exit:
> +       starfive_wdt_lock(wdt);
> +       return ret;
> +}
> +
> +static void starfive_wdt_stop(struct starfive_wdt *wdt)
> +{
> +       starfive_wdt_unlock(wdt);
> +       starfive_wdt_disable(wdt);
> +       starfive_wdt_lock(wdt);
> +}
> +
> +static int starfive_wdt_pm_start(struct watchdog_device *wdd)
> +{
> +       struct starfive_wdt *wdt = watchdog_get_drvdata(wdd);
> +       int ret = pm_runtime_get_sync(wdd->parent);
> +
> +       if (ret < 0)
> +               return ret;
> +
> +       return starfive_wdt_start(wdt);
> +}
> +
> +static int starfive_wdt_pm_stop(struct watchdog_device *wdd)
> +{
> +       struct starfive_wdt *wdt = watchdog_get_drvdata(wdd);
> +
> +       starfive_wdt_stop(wdt);
> +       return pm_runtime_put_sync(wdd->parent);
> +}
> +
> +static int starfive_wdt_set_timeout(struct watchdog_device *wdd,
> +                                   unsigned int timeout)
> +{
> +       struct starfive_wdt *wdt = watchdog_get_drvdata(wdd);
> +       unsigned long count = timeout * wdt->freq;
> +
> +       /* some watchdogs take two timeouts to reset */
> +       if (wdt->variant->double_timeout)
> +               count /= 2;
> +
> +       wdt->count = count;
> +       wdd->timeout = timeout;
> +
> +       starfive_wdt_unlock(wdt);
> +       starfive_wdt_disable(wdt);
> +       starfive_wdt_set_reload_count(wdt, wdt->count);
> +       starfive_wdt_enable(wdt);
> +       starfive_wdt_lock(wdt);
> +
> +       return 0;
> +}
> +
> +#define STARFIVE_WDT_OPTIONS (WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE)
> +
> +static const struct watchdog_info starfive_wdt_info = {
> +       .options = STARFIVE_WDT_OPTIONS,
> +       .identity = "StarFive Watchdog",
> +};
> +
> +static const struct watchdog_ops starfive_wdt_ops = {
> +       .owner = THIS_MODULE,
> +       .start = starfive_wdt_pm_start,
> +       .stop = starfive_wdt_pm_stop,
> +       .ping = starfive_wdt_keepalive,
> +       .set_timeout = starfive_wdt_set_timeout,
> +       .get_timeleft = starfive_wdt_get_timeleft,
> +};
> +
> +static int starfive_wdt_probe(struct platform_device *pdev)
> +{
> +       struct starfive_wdt *wdt;
> +       int ret;
> +
> +       wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL);
> +       if (!wdt)
> +               return -ENOMEM;
> +
> +       wdt->base = devm_platform_ioremap_resource(pdev, 0);
> +       if (IS_ERR(wdt->base))
> +               return dev_err_probe(&pdev->dev, PTR_ERR(wdt->base), "error mapping registers\n");
> +
> +       wdt->wdd.parent = &pdev->dev;
> +       ret = starfive_wdt_get_clock(wdt);
> +       if (ret)
> +               return ret;
> +
> +       platform_set_drvdata(pdev, wdt);
> +       pm_runtime_enable(&pdev->dev);
> +       if (pm_runtime_enabled(&pdev->dev)) {
> +               ret = pm_runtime_get_sync(&pdev->dev);
> +               if (ret < 0)
> +                       return ret;
> +       } else {
> +               /* runtime PM is disabled but clocks need to be enabled */
> +               ret = starfive_wdt_enable_clock(wdt);
> +               if (ret)
> +                       return ret;
> +       }
> +
> +       ret = starfive_wdt_reset_init(&pdev->dev);
> +       if (ret)
> +               goto err_exit;
> +
> +       watchdog_set_drvdata(&wdt->wdd, wdt);
> +       wdt->wdd.info = &starfive_wdt_info;
> +       wdt->wdd.ops = &starfive_wdt_ops;
> +       wdt->variant = of_device_get_match_data(&pdev->dev);
> +       spin_lock_init(&wdt->lock);
> +
> +       wdt->freq = clk_get_rate(wdt->core_clk);
> +       if (!wdt->freq) {
> +               dev_err(&pdev->dev, "get clock rate failed.\n");
> +               ret = -EINVAL;
> +               goto err_exit;
> +       }
> +
> +       wdt->wdd.min_timeout = 1;
> +       wdt->wdd.max_timeout = starfive_wdt_max_timeout(wdt);
> +       wdt->wdd.timeout = STARFIVE_WDT_DEFAULT_TIME;
> +       watchdog_init_timeout(&wdt->wdd, heartbeat, &pdev->dev);
> +       starfive_wdt_set_timeout(&wdt->wdd, wdt->wdd.timeout);
> +
> +       watchdog_set_nowayout(&wdt->wdd, nowayout);
> +       watchdog_stop_on_reboot(&wdt->wdd);
> +       watchdog_stop_on_unregister(&wdt->wdd);
> +
> +       if (early_enable) {
> +               ret = starfive_wdt_start(wdt);
> +               if (ret)
> +                       goto err_exit;
> +               set_bit(WDOG_HW_RUNNING, &wdt->wdd.status);
> +       } else {
> +               starfive_wdt_stop(wdt);
> +       }
> +
> +       ret = watchdog_register_device(&wdt->wdd);
> +       if (ret)
> +               goto err_exit;
> +
> +       if (!early_enable)
> +               return pm_runtime_put_sync(&pdev->dev);
> +
> +       return 0;
> +
> +err_exit:
> +       starfive_wdt_disable_clock(wdt);
> +       pm_runtime_disable(&pdev->dev);
> +
> +       return ret;
> +}
> +
> +static int starfive_wdt_remove(struct platform_device *pdev)
> +{
> +       struct starfive_wdt *wdt = platform_get_drvdata(pdev);
> +
> +       starfive_wdt_stop(wdt);
> +       watchdog_unregister_device(&wdt->wdd);
> +
> +       if (pm_runtime_enabled(&pdev->dev))
> +               pm_runtime_disable(&pdev->dev);
> +       else
> +               /* disable clock without PM */
> +               starfive_wdt_disable_clock(wdt);
> +
> +       return 0;
> +}
> +
> +static void starfive_wdt_shutdown(struct platform_device *pdev)
> +{
> +       struct starfive_wdt *wdt = platform_get_drvdata(pdev);
> +
> +       starfive_wdt_pm_stop(&wdt->wdd);
> +}
> +
> +#ifdef CONFIG_PM_SLEEP
> +static int starfive_wdt_suspend(struct device *dev)
> +{
> +       struct starfive_wdt *wdt = dev_get_drvdata(dev);
> +
> +       /* Save watchdog state, and turn it off. */
> +       wdt->reload = starfive_wdt_get_count(wdt);
> +
> +       /* Note that WTCNT doesn't need to be saved. */
> +       starfive_wdt_stop(wdt);
> +
> +       return pm_runtime_force_suspend(dev);
> +}
> +
> +static int starfive_wdt_resume(struct device *dev)
> +{
> +       struct starfive_wdt *wdt = dev_get_drvdata(dev);
> +       int ret;
> +
> +       ret = pm_runtime_force_resume(dev);
> +       if (ret)
> +               return ret;
> +
> +       starfive_wdt_unlock(wdt);
> +       /* Restore watchdog state. */
> +       starfive_wdt_set_reload_count(wdt, wdt->reload);
> +       starfive_wdt_lock(wdt);
> +
> +       return starfive_wdt_start(wdt);
> +}
> +#endif /* CONFIG_PM_SLEEP */
> +
> +#ifdef CONFIG_PM
> +static int starfive_wdt_runtime_suspend(struct device *dev)
> +{
> +       struct starfive_wdt *wdt = dev_get_drvdata(dev);
> +
> +       starfive_wdt_disable_clock(wdt);
> +
> +       return 0;
> +}
> +
> +static int starfive_wdt_runtime_resume(struct device *dev)
> +{
> +       struct starfive_wdt *wdt = dev_get_drvdata(dev);
> +
> +       return starfive_wdt_enable_clock(wdt);
> +}
> +#endif /* CONFIG_PM */
> +
> +static const struct dev_pm_ops starfive_wdt_pm_ops = {
> +       SET_RUNTIME_PM_OPS(starfive_wdt_runtime_suspend, starfive_wdt_runtime_resume, NULL)
> +       SET_SYSTEM_SLEEP_PM_OPS(starfive_wdt_suspend, starfive_wdt_resume)
> +};
> +
> +static const struct of_device_id starfive_wdt_match[] = {
> +       { .compatible = "starfive,jh7100-wdt", .data = &starfive_wdt_jh7100_variant },
> +       { .compatible = "starfive,jh7110-wdt", .data = &starfive_wdt_jh7110_variant },
> +       { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, starfive_wdt_match);
> +
> +static struct platform_driver starfive_wdt_driver = {
> +       .probe = starfive_wdt_probe,
> +       .remove = starfive_wdt_remove,
> +       .shutdown = starfive_wdt_shutdown,
> +       .driver = {
> +               .name = "starfive-wdt",
> +               .pm = &starfive_wdt_pm_ops,
> +               .of_match_table = of_match_ptr(starfive_wdt_match),
> +       },
> +};
> +module_platform_driver(starfive_wdt_driver);
> +
> +MODULE_AUTHOR("Xingyu Wu <xingyu.wu@starfivetech.com>");
> +MODULE_AUTHOR("Samin Guo <samin.guo@starfivetech.com>");
> +MODULE_DESCRIPTION("StarFive Watchdog Device Driver");
> +MODULE_LICENSE("GPL");
> --
> 2.25.1
>
>
> _______________________________________________
> linux-riscv mailing list
> linux-riscv@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv

  reply	other threads:[~2023-03-29 16:17 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-03-14 13:24 [PATCH v5 0/3] Add watchdog driver for StarFive JH7100/JH7110 RISC-V SoCs Xingyu Wu
2023-03-14 13:24 ` [PATCH v5 1/3] dt-bindings: watchdog: Add watchdog for StarFive JH7100 and JH7110 Xingyu Wu
2023-04-16 15:54   ` Guenter Roeck
2023-03-14 13:24 ` [PATCH v5 2/3] drivers: watchdog: Add StarFive Watchdog driver Xingyu Wu
2023-03-29 16:16   ` Emil Renner Berthing [this message]
2023-04-04  9:54   ` Xingyu Wu
2023-04-16 15:54   ` Guenter Roeck
2023-03-14 13:24 ` [PATCH v5 3/3] riscv: dts: starfive: jh7100: Add watchdog node Xingyu Wu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAJM55Z_+uEo17AVzyxm69=Z0GMjv5Z17qyW2KGfh_xH5jOmNAw@mail.gmail.com' \
    --to=emil.renner.berthing@canonical.com \
    --cc=aou@eecs.berkeley.edu \
    --cc=conor@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=kernel@esmil.dk \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=linux-watchdog@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=p.zabel@pengutronix.de \
    --cc=palmer@dabbelt.com \
    --cc=paul.walmsley@sifive.com \
    --cc=robh+dt@kernel.org \
    --cc=samin.guo@starfivetech.com \
    --cc=wim@linux-watchdog.org \
    --cc=xingyu.wu@starfivetech.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).