RE: [PATCH RESEND V4 2/3] arm64: dts: imx8qxp: Move watchdog node into scu node

[Anson Huang <anson.huang@nxp.com>]

Hi, Shawn
	The driver and binding doc are already reviewed and waiting for DT patch, will you help review this DT patch?

Thanks,
Anson

> -----Original Message-----
> From: Anson Huang
> Sent: Sunday, May 12, 2019 6:11 PM
> To: robh+dt@kernel.org; mark.rutland@arm.com; wim@linux-watchdog.org;
> linux@roeck-us.net; shawnguo@kernel.org; s.hauer@pengutronix.de;
> kernel@pengutronix.de; festevam@gmail.com; Aisheng Dong
> <aisheng.dong@nxp.com>; ulf.hansson@linaro.org; Daniel Baluta
> <daniel.baluta@nxp.com>; Peng Fan <peng.fan@nxp.com>;
> devicetree@vger.kernel.org; linux-kernel@vger.kernel.org; linux-
> watchdog@vger.kernel.org; linux-arm-kernel@lists.infradead.org
> Cc: dl-linux-imx <linux-imx@nxp.com>
> Subject: [PATCH RESEND V4 2/3] arm64: dts: imx8qxp: Move watchdog node
> into scu node
> 
> i.MX system controller watchdog has pretimeout function which depends on
> i.MX SCU driver, so it should be a subnode of SCU.
> 
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> ---
> No change, just resend patch with correct encoding.
> ---
>  arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 10 +++++-----
>  1 file changed, 5 insertions(+), 5 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> index 0683ee2..b17c22e 100644
> --- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> @@ -149,6 +149,11 @@
>  		rtc: rtc {
>  			compatible = "fsl,imx8qxp-sc-rtc";
>  		};
> +
> +		watchdog {
> +			compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt";
> +			timeout-sec = <60>;
> +		};
>  	};
> 
>  	timer {
> @@ -517,9 +522,4 @@
>  			power-domains = <&pd IMX_SC_R_GPIO_7>;
>  		};
>  	};
> -
> -	watchdog {
> -		compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt";
> -		timeout-sec = <60>;
> -	};
>  };
> --
> 2.7.4