From: Guenter Roeck <linux@roeck-us.net>
To: Mika Westerberg <mika.westerberg@linux.intel.com>,
Jean Delvare <jdelvare@suse.com>,
Wim Van Sebroeck <wim@linux-watchdog.org>,
Wolfram Sang <wsa@the-dreams.de>
Cc: Martin Volf <martin.volf.42@gmail.com>,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
Jarkko Nikula <jarkko.nikula@linux.intel.com>,
linux-i2c@vger.kernel.org, linux-hwmon@vger.kernel.org,
linux-watchdog@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 3/3] i2c: i801: Do not add ICH_RES_IO_SMI for the iTCO_wdt device
Date: Wed, 26 Feb 2020 05:31:31 -0800 [thread overview]
Message-ID: <f8549db6-de8a-2205-5cef-f0cb457a21f1@roeck-us.net> (raw)
In-Reply-To: <20200226132122.62805-4-mika.westerberg@linux.intel.com>
On 2/26/20 5:21 AM, Mika Westerberg wrote:
> Martin noticed that nct6775 driver does not load properly on his system
> in v5.4+ kernels. The issue was bisected to commit b84398d6d7f9 ("i2c:
> i801: Use iTCO version 6 in Cannon Lake PCH and beyond") but it is
> likely not the culprit because the faulty code has been in the driver
> already since commit 9424693035a5 ("i2c: i801: Create iTCO device on
> newer Intel PCHs"). So more likely some commit that added PCI IDs of
> recent chipsets made the driver to create the iTCO_wdt device on Martins
> system.
>
> The issue was debugged to be PCI configuration access to the PMC device
> that is not present. This returns all 1's when read and this caused the
> iTCO_wdt driver to accidentally request resourses used by nct6775.
>
> It turns out that the SMI resource is only required for some ancient
> systems, not the ones supported by this driver. For this reason do not
> populate the SMI resource at all and drop all the related code. The
> driver now always populates the main I/O resource and only in case of SPT
> (Intel Sunrisepoint) compatible devices it adds another resource for the
> NO_REBOOT bit. These two resources are of different types so
> platform_get_resource() used by the iTCO_wdt driver continues to find
> the both resources at index 0.
>
> Link: https://lore.kernel.org/linux-hwmon/CAM1AHpQ4196tyD=HhBu-2donSsuogabkfP03v1YF26Q7_BgvgA@mail.gmail.com/
> Fixes: 9424693035a5 ("i2c: i801: Create iTCO device on newer Intel PCHs")
> Reported-by: Martin Volf <martin.volf.42@gmail.com>
> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
> ---
> drivers/i2c/busses/i2c-i801.c | 45 ++++++++++-------------------------
> 1 file changed, 12 insertions(+), 33 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
> index ca4f096fef74..a9c03f5c3482 100644
> --- a/drivers/i2c/busses/i2c-i801.c
> +++ b/drivers/i2c/busses/i2c-i801.c
> @@ -132,11 +132,6 @@
> #define TCOBASE 0x050
> #define TCOCTL 0x054
>
> -#define ACPIBASE 0x040
> -#define ACPIBASE_SMI_OFF 0x030
> -#define ACPICTRL 0x044
> -#define ACPICTRL_EN 0x080
> -
> #define SBREG_BAR 0x10
> #define SBREG_SMBCTRL 0xc6000c
> #define SBREG_SMBCTRL_DNV 0xcf000c
> @@ -1553,7 +1548,7 @@ i801_add_tco_spt(struct i801_priv *priv, struct pci_dev *pci_dev,
> pci_bus_write_config_byte(pci_dev->bus, devfn, 0xe1, hidden);
> spin_unlock(&p2sb_spinlock);
>
> - res = &tco_res[ICH_RES_MEM_OFF];
> + res = &tco_res[1];
> if (pci_dev->device == PCI_DEVICE_ID_INTEL_DNV_SMBUS)
> res->start = (resource_size_t)base64_addr + SBREG_SMBCTRL_DNV;
> else
> @@ -1563,7 +1558,7 @@ i801_add_tco_spt(struct i801_priv *priv, struct pci_dev *pci_dev,
> res->flags = IORESOURCE_MEM;
>
> return platform_device_register_resndata(&pci_dev->dev, "iTCO_wdt", -1,
> - tco_res, 3, &spt_tco_platform_data,
> + tco_res, 2, &spt_tco_platform_data,
> sizeof(spt_tco_platform_data));
> }
>
> @@ -1576,17 +1571,16 @@ static struct platform_device *
> i801_add_tco_cnl(struct i801_priv *priv, struct pci_dev *pci_dev,
> struct resource *tco_res)
> {
> - return platform_device_register_resndata(&pci_dev->dev, "iTCO_wdt", -1,
> - tco_res, 2, &cnl_tco_platform_data,
> - sizeof(cnl_tco_platform_data));
> + return platform_device_register_resndata(&pci_dev->dev,
> + "iTCO_wdt", -1, tco_res, 1, &cnl_tco_platform_data,
> + sizeof(cnl_tco_platform_data));
> }
>
> static void i801_add_tco(struct i801_priv *priv)
> {
> - u32 base_addr, tco_base, tco_ctl, ctrl_val;
> struct pci_dev *pci_dev = priv->pci_dev;
> - struct resource tco_res[3], *res;
> - unsigned int devfn;
> + struct resource tco_res[2], *res;
> + u32 tco_base, tco_ctl;
>
> /* If we have ACPI based watchdog use that instead */
> if (acpi_has_watchdog())
> @@ -1601,30 +1595,15 @@ static void i801_add_tco(struct i801_priv *priv)
> return;
>
> memset(tco_res, 0, sizeof(tco_res));
> -
> - res = &tco_res[ICH_RES_IO_TCO];
> - res->start = tco_base & ~1;
> - res->end = res->start + 32 - 1;
> - res->flags = IORESOURCE_IO;
> -
> /*
> - * Power Management registers.
> + * Always populate the main iTCO IO resource here. The second entry
> + * for NO_REBOOT MMIO is filled by the SPT specific function.
> */
> - devfn = PCI_DEVFN(PCI_SLOT(pci_dev->devfn), 2);
> - pci_bus_read_config_dword(pci_dev->bus, devfn, ACPIBASE, &base_addr);
> -
> - res = &tco_res[ICH_RES_IO_SMI];
> - res->start = (base_addr & ~1) + ACPIBASE_SMI_OFF;
> - res->end = res->start + 3;
> + res = &tco_res[0];
> + res->start = tco_base & ~1;
> + res->end = res->start + 32 - 1;
> res->flags = IORESOURCE_IO;
>
> - /*
> - * Enable the ACPI I/O space.
> - */
> - pci_bus_read_config_dword(pci_dev->bus, devfn, ACPICTRL, &ctrl_val);
> - ctrl_val |= ACPICTRL_EN;
> - pci_bus_write_config_dword(pci_dev->bus, devfn, ACPICTRL, ctrl_val);
> -
> if (priv->features & FEATURE_TCO_CNL)
> priv->tco_pdev = i801_add_tco_cnl(priv, pci_dev, tco_res);
> else
>
next prev parent reply other threads:[~2020-02-26 13:31 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-26 13:21 [PATCH v2 0/3] i2c: i801: Fix iTCO_wdt resource creation if PMC is not present Mika Westerberg
2020-02-26 13:21 ` [PATCH v2 1/3] watchdog: iTCO_wdt: Export vendorsupport Mika Westerberg
2020-02-26 13:32 ` Guenter Roeck
2020-02-26 13:39 ` Mika Westerberg
2020-03-10 9:30 ` Wolfram Sang
2020-02-26 13:21 ` [PATCH v2 2/3] watchdog: iTCO_wdt: Make ICH_RES_IO_SMI optional Mika Westerberg
2020-02-26 13:33 ` Guenter Roeck
2020-03-10 9:30 ` Wolfram Sang
2020-02-26 13:21 ` [PATCH v2 3/3] i2c: i801: Do not add ICH_RES_IO_SMI for the iTCO_wdt device Mika Westerberg
2020-02-26 13:31 ` Guenter Roeck [this message]
2020-03-10 9:31 ` Wolfram Sang
2020-02-28 17:03 ` [PATCH v2 0/3] i2c: i801: Fix iTCO_wdt resource creation if PMC is not present Wolfram Sang
2020-03-02 10:12 ` Mika Westerberg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=f8549db6-de8a-2205-5cef-f0cb457a21f1@roeck-us.net \
--to=linux@roeck-us.net \
--cc=andriy.shevchenko@linux.intel.com \
--cc=jarkko.nikula@linux.intel.com \
--cc=jdelvare@suse.com \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=martin.volf.42@gmail.com \
--cc=mika.westerberg@linux.intel.com \
--cc=wim@linux-watchdog.org \
--cc=wsa@the-dreams.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).