Linux-Wireless Archive on
 help / color / Atom feed
* [PATCH v8 0/4] ath10k: improve throughout of TX of sdio
@ 2019-11-28 10:30 Wen Gong
  0 siblings, 0 replies; only message in thread
From: Wen Gong @ 2019-11-28 10:30 UTC (permalink / raw)
  To: ath10k; +Cc: linux-wireless

v8: split out patch "change ATH10K_SDIO_BUS_REQUEST_MAX_NUM from 64 to 1024"
from "disable TX complete indication of htt for sdio". merge patch
"ath10k: clean bundle tx queue of htt tx stop for sdio" into
"add htt TX bundle for sdio"

v7: change a few code style to meet ath10k-check script

v6: remove module parameters disable_tx_comp and alt_data
this is 3 patches of the 7 patches from ath10k: improve throughout of tcp/udp TX/RX of sdio

v5: change ath10k_htc_setup_tx_req to add check bundle_tx
to forbidden init 2 times


v3: change some code style

v2: change some code style

The bottleneck of throughout on sdio chip is the bus bandwidth, to the
patches are all to increase the use ratio of sdio bus.

These patches only affect sdio bus chip, explanation is mentioned in each
patch's commit log.

Wen Gong (4):
  ath10k: disable TX complete indication of htt for sdio
  ath10k: change ATH10K_SDIO_BUS_REQUEST_MAX_NUM from 64 to 1024
  ath10k: add htt TX bundle for sdio
  ath10k: enable alt data of TX path for sdio

 drivers/net/wireless/ath/ath10k/core.c   |  27 +-
 drivers/net/wireless/ath/ath10k/core.h   |   4 +-
 drivers/net/wireless/ath/ath10k/hif.h    |   9 +
 drivers/net/wireless/ath/ath10k/htc.c    | 394 +++++++++++++++++++++--
 drivers/net/wireless/ath/ath10k/htc.h    |  40 ++-
 drivers/net/wireless/ath/ath10k/htt.c    |  13 +
 drivers/net/wireless/ath/ath10k/htt.h    |  17 +-
 drivers/net/wireless/ath/ath10k/htt_rx.c |  35 +-
 drivers/net/wireless/ath/ath10k/htt_tx.c |  39 ++-
 drivers/net/wireless/ath/ath10k/hw.h     |   2 +-
 drivers/net/wireless/ath/ath10k/sdio.c   |  23 ++
 drivers/net/wireless/ath/ath10k/sdio.h   |   3 +-
 12 files changed, 553 insertions(+), 53 deletions(-)


^ permalink raw reply	[flat|nested] only message in thread

only message in thread, back to index

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-11-28 10:30 [PATCH v8 0/4] ath10k: improve throughout of TX of sdio Wen Gong

Linux-Wireless Archive on

Archives are clonable:
	git clone --mirror linux-wireless/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-wireless linux-wireless/ \
	public-inbox-index linux-wireless

Example config snippet for mirrors

Newsgroup available over NNTP:

AGPL code for this site: git clone