* Wireless Centrino 2230-N issues
@ 2014-05-11 11:59 Alen Krmelj
2014-05-12 9:32 ` [Ilw] " Grumbach, Emmanuel
0 siblings, 1 reply; 10+ messages in thread
From: Alen Krmelj @ 2014-05-11 11:59 UTC (permalink / raw)
To: linux-wireless; +Cc: ilw
My wireless card was working fine for some time, but after
reinstallation of computer with Ubuntu, it stopped working and i keep
getting this in my dmesg:
lspci:
0a:00.0 Network controller: Intel Corporation Centrino Wireless-N 2230
(rev c4)
Subsystem: Intel Corporation Centrino Wireless-N 2230 BGN
dmesg:
[ 1465.050832] iwlwifi 0000:0a:00.0: L1 Disabled; Enabling L0S
[ 1465.058299] iwlwifi 0000:0a:00.0: Radio type=0x2-0x0-0x0
[ 1465.104509] iwlwifi 0000:0a:00.0: Command COEX_PRIORITY_TABLE_CMD
failed: FW Error
[ 1465.104522] iwlwifi 0000:0a:00.0: Could not complete ALIVE transition: -5
[ 1465.104527] iwlwifi 0000:0a:00.0: Failed to start RT ucode: -5
[ 1465.104818] iwlwifi 0000:0a:00.0: Unable to initialize device.
[ 1465.105296] iwlwifi 0000:0a:00.0: L1 Disabled; Enabling L0S
[ 1465.112770] iwlwifi 0000:0a:00.0: Radio type=0x2-0x0-0x0
[ 1465.156493] iwlwifi 0000:0a:00.0: Command COEX_PRIORITY_TABLE_CMD
failed: FW Error
[ 1465.156500] iwlwifi 0000:0a:00.0: Could not complete ALIVE transition: -5
[ 1465.156504] iwlwifi 0000:0a:00.0: Failed to start RT ucode: -5
[ 1465.156784] iwlwifi 0000:0a:00.0: Unable to initialize device.
[ 1465.158031] iwlwifi 0000:0a:00.0: L1 Disabled; Enabling L0S
[ 1465.165471] iwlwifi 0000:0a:00.0: Radio type=0x2-0x0-0x0
[ 1465.212534] iwlwifi 0000:0a:00.0: Command COEX_PRIORITY_TABLE_CMD
failed: FW Error
[ 1465.212542] iwlwifi 0000:0a:00.0: Could not complete ALIVE transition: -5
[ 1465.212546] iwlwifi 0000:0a:00.0: Failed to start RT ucode: -5
[ 1465.212825] iwlwifi 0000:0a:00.0: Unable to initialize device.
[ 1465.213119] iwlwifi 0000:0a:00.0: L1 Disabled; Enabling L0S
[ 1465.220559] iwlwifi 0000:0a:00.0: Radio type=0x2-0x0-0x0
Does this mean i have issue with driver/kernel or my wifi card is
broken? I tried copying latest uucode for 2230 wireless card
(http://wireless.kernel.org/en/users/Drivers/iwlwifi?action=AttachFile&do=get&target=iwlwifi-2030-ucode-18.168.6.1.tgz)
into /lib/firmware and reloading kernel module, no success. Still the
same issue.
Best regards,
Alen Krmelj
^ permalink raw reply [flat|nested] 10+ messages in thread
* RE: [Ilw] Wireless Centrino 2230-N issues
2014-05-11 11:59 Wireless Centrino 2230-N issues Alen Krmelj
@ 2014-05-12 9:32 ` Grumbach, Emmanuel
2014-05-30 0:20 ` piotr
0 siblings, 1 reply; 10+ messages in thread
From: Grumbach, Emmanuel @ 2014-05-12 9:32 UTC (permalink / raw)
To: Alen Krmelj, linux-wireless; +Cc: ilw
>
> My wireless card was working fine for some time, but after reinstallation of
> computer with Ubuntu, it stopped working and i keep getting this in my
> dmesg:
Can you please share with us the kernel versions you had used until now, and your current version?
>
> lspci:
> 0a:00.0 Network controller: Intel Corporation Centrino Wireless-N 2230 (rev
> c4)
> Subsystem: Intel Corporation Centrino Wireless-N 2230 BGN
>
>
> dmesg:
> [ 1465.050832] iwlwifi 0000:0a:00.0: L1 Disabled; Enabling L0S
> [ 1465.058299] iwlwifi 0000:0a:00.0: Radio type=0x2-0x0-0x0
> [ 1465.104509] iwlwifi 0000:0a:00.0: Command COEX_PRIORITY_TABLE_CMD
> failed: FW Error
> [ 1465.104522] iwlwifi 0000:0a:00.0: Could not complete ALIVE transition: -5
> [ 1465.104527] iwlwifi 0000:0a:00.0: Failed to start RT ucode: -5
> [ 1465.104818] iwlwifi 0000:0a:00.0: Unable to initialize device.
> [ 1465.105296] iwlwifi 0000:0a:00.0: L1 Disabled; Enabling L0S
> [ 1465.112770] iwlwifi 0000:0a:00.0: Radio type=0x2-0x0-0x0
> [ 1465.156493] iwlwifi 0000:0a:00.0: Command COEX_PRIORITY_TABLE_CMD
> failed: FW Error
> [ 1465.156500] iwlwifi 0000:0a:00.0: Could not complete ALIVE transition: -5
> [ 1465.156504] iwlwifi 0000:0a:00.0: Failed to start RT ucode: -5
> [ 1465.156784] iwlwifi 0000:0a:00.0: Unable to initialize device.
> [ 1465.158031] iwlwifi 0000:0a:00.0: L1 Disabled; Enabling L0S
> [ 1465.165471] iwlwifi 0000:0a:00.0: Radio type=0x2-0x0-0x0
> [ 1465.212534] iwlwifi 0000:0a:00.0: Command COEX_PRIORITY_TABLE_CMD
> failed: FW Error
> [ 1465.212542] iwlwifi 0000:0a:00.0: Could not complete ALIVE transition: -5
> [ 1465.212546] iwlwifi 0000:0a:00.0: Failed to start RT ucode: -5
> [ 1465.212825] iwlwifi 0000:0a:00.0: Unable to initialize device.
> [ 1465.213119] iwlwifi 0000:0a:00.0: L1 Disabled; Enabling L0S
> [ 1465.220559] iwlwifi 0000:0a:00.0: Radio type=0x2-0x0-0x0
>
> Does this mean i have issue with driver/kernel or my wifi card is
> broken? I tried copying latest uucode for 2230 wireless card
> (http://wireless.kernel.org/en/users/Drivers/iwlwifi?action=AttachFile&do=
> get&target=iwlwifi-2030-ucode-18.168.6.1.tgz)
> into /lib/firmware and reloading kernel module, no success. Still the
> same issue.
>
>
> Best regards,
> Alen Krmelj
>
> _______________________________________________
> ilw mailing list
> ilw@linux.intel.com
> http://linux.intel.com/mailman/listinfo/ilw
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Ilw] Wireless Centrino 2230-N issues
2014-05-12 9:32 ` [Ilw] " Grumbach, Emmanuel
@ 2014-05-30 0:20 ` piotr
2014-05-30 7:09 ` Emmanuel Grumbach
0 siblings, 1 reply; 10+ messages in thread
From: piotr @ 2014-05-30 0:20 UTC (permalink / raw)
To: linux-wireless
Grumbach, Emmanuel <emmanuel.grumbach@...> writes:
>
> >
> > My wireless card was working fine for some time, but after reinstallation of
> > computer with Ubuntu, it stopped working and i keep getting this in my
> > dmesg:
>
> Can you please share with us the kernel versions you had used until now,
and your current version?
>
Hi,
I have similar problem. My system is Ubuntu 14.04 with kernel 3.13.0-24
installed on a new Toshiba laptop with N2230 wifi card.
dmesg:
[ 614.007461] iwlwifi 0000:01:00.0: Could not complete ALIVE transition: -5
[ 614.007748] iwlwifi 0000:01:00.0: Failed to run INIT ucode: -5
[ 614.007790] iwlwifi 0000:01:00.0: Unable to initialize device.
[ 614.008318] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[ 614.015390] iwlwifi 0000:01:00.0: Radio type=0x2-0x0-0x0
[ 614.059495] iwlwifi 0000:01:00.0: Command COEX_PRIORITY_TABLE_CMD failed:
FW Error
Is the card broken?
Best,
Piotr
> >
> > lspci:
> > 0a:00.0 Network controller: Intel Corporation Centrino Wireless-N 2230 (rev
> > c4)
> > Subsystem: Intel Corporation Centrino Wireless-N 2230 BGN
> >
> >
> > dmesg:
> > [ 1465.050832] iwlwifi 0000:0a:00.0: L1 Disabled; Enabling L0S
> > [ 1465.058299] iwlwifi 0000:0a:00.0: Radio type=0x2-0x0-0x0
> > [ 1465.104509] iwlwifi 0000:0a:00.0: Command COEX_PRIORITY_TABLE_CMD
> > failed: FW Error
> > [ 1465.104522] iwlwifi 0000:0a:00.0: Could not complete ALIVE transition: -5
> > [ 1465.104527] iwlwifi 0000:0a:00.0: Failed to start RT ucode: -5
> > [ 1465.104818] iwlwifi 0000:0a:00.0: Unable to initialize device.
> > [ 1465.105296] iwlwifi 0000:0a:00.0: L1 Disabled; Enabling L0S
> > [ 1465.112770] iwlwifi 0000:0a:00.0: Radio type=0x2-0x0-0x0
> > [ 1465.156493] iwlwifi 0000:0a:00.0: Command COEX_PRIORITY_TABLE_CMD
> > failed: FW Error
> > [ 1465.156500] iwlwifi 0000:0a:00.0: Could not complete ALIVE transition: -5
> > [ 1465.156504] iwlwifi 0000:0a:00.0: Failed to start RT ucode: -5
> > [ 1465.156784] iwlwifi 0000:0a:00.0: Unable to initialize device.
> > [ 1465.158031] iwlwifi 0000:0a:00.0: L1 Disabled; Enabling L0S
> > [ 1465.165471] iwlwifi 0000:0a:00.0: Radio type=0x2-0x0-0x0
> > [ 1465.212534] iwlwifi 0000:0a:00.0: Command COEX_PRIORITY_TABLE_CMD
> > failed: FW Error
> > [ 1465.212542] iwlwifi 0000:0a:00.0: Could not complete ALIVE transition: -5
> > [ 1465.212546] iwlwifi 0000:0a:00.0: Failed to start RT ucode: -5
> > [ 1465.212825] iwlwifi 0000:0a:00.0: Unable to initialize device.
> > [ 1465.213119] iwlwifi 0000:0a:00.0: L1 Disabled; Enabling L0S
> > [ 1465.220559] iwlwifi 0000:0a:00.0: Radio type=0x2-0x0-0x0
> >
> > Does this mean i have issue with driver/kernel or my wifi card is
> > broken? I tried copying latest uucode for 2230 wireless card
> > (http://wireless.kernel.org/en/users/Drivers/iwlwifi?action=AttachFile&do=
> > get&target=iwlwifi-2030-ucode-18.168.6.1.tgz)
> > into /lib/firmware and reloading kernel module, no success. Still the
> > same issue.
> >
> >
> > Best regards,
> > Alen Krmelj
> >
> > _______________________________________________
> > ilw mailing list
> > ilw@...
> > http://linux.intel.com/mailman/listinfo/ilw
> --
> To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
> the body of a message to majordomo@...
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
>
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Ilw] Wireless Centrino 2230-N issues
2014-05-30 0:20 ` piotr
@ 2014-05-30 7:09 ` Emmanuel Grumbach
2014-05-30 7:10 ` Emmanuel Grumbach
0 siblings, 1 reply; 10+ messages in thread
From: Emmanuel Grumbach @ 2014-05-30 7:09 UTC (permalink / raw)
To: piotr, linux-wireless
>>>
>>> My wireless card was working fine for some time, but after reinstallation of
>>> computer with Ubuntu, it stopped working and i keep getting this in my
>>> dmesg:
>>
>> Can you please share with us the kernel versions you had used until now,
> and your current version?
>>
>
> Hi,
>
> I have similar problem. My system is Ubuntu 14.04 with kernel 3.13.0-24
> installed on a new Toshiba laptop with N2230 wifi card.
> dmesg:
> [ 614.007461] iwlwifi 0000:01:00.0: Could not complete ALIVE transition: -5
> [ 614.007748] iwlwifi 0000:01:00.0: Failed to run INIT ucode: -5
> [ 614.007790] iwlwifi 0000:01:00.0: Unable to initialize device.
> [ 614.008318] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
> [ 614.015390] iwlwifi 0000:01:00.0: Radio type=0x2-0x0-0x0
> [ 614.059495] iwlwifi 0000:01:00.0: Command COEX_PRIORITY_TABLE_CMD failed:
> FW Error
>
> Is the card broken?
>
> Best,
> Piotr
>
>
>>>
>>> lspci:
>>> 0a:00.0 Network controller: Intel Corporation Centrino Wireless-N 2230 (rev
>>> c4)
>>> Subsystem: Intel Corporation Centrino Wireless-N 2230 BGN
>>>
>>>
>>> dmesg:
>>> [ 1465.050832] iwlwifi 0000:0a:00.0: L1 Disabled; Enabling L0S
>>> [ 1465.058299] iwlwifi 0000:0a:00.0: Radio type=0x2-0x0-0x0
>>> [ 1465.104509] iwlwifi 0000:0a:00.0: Command COEX_PRIORITY_TABLE_CMD
>>> failed: FW Error
>>> [ 1465.104522] iwlwifi 0000:0a:00.0: Could not complete ALIVE transition: -5
>>> [ 1465.104527] iwlwifi 0000:0a:00.0: Failed to start RT ucode: -5
>>> [ 1465.104818] iwlwifi 0000:0a:00.0: Unable to initialize device.
>>> [ 1465.105296] iwlwifi 0000:0a:00.0: L1 Disabled; Enabling L0S
>>> [ 1465.112770] iwlwifi 0000:0a:00.0: Radio type=0x2-0x0-0x0
>>> [ 1465.156493] iwlwifi 0000:0a:00.0: Command COEX_PRIORITY_TABLE_CMD
>>> failed: FW Error
>>> [ 1465.156500] iwlwifi 0000:0a:00.0: Could not complete ALIVE transition: -5
>>> [ 1465.156504] iwlwifi 0000:0a:00.0: Failed to start RT ucode: -5
>>> [ 1465.156784] iwlwifi 0000:0a:00.0: Unable to initialize device.
>>> [ 1465.158031] iwlwifi 0000:0a:00.0: L1 Disabled; Enabling L0S
>>> [ 1465.165471] iwlwifi 0000:0a:00.0: Radio type=0x2-0x0-0x0
>>> [ 1465.212534] iwlwifi 0000:0a:00.0: Command COEX_PRIORITY_TABLE_CMD
>>> failed: FW Error
>>> [ 1465.212542] iwlwifi 0000:0a:00.0: Could not complete ALIVE transition: -5
>>> [ 1465.212546] iwlwifi 0000:0a:00.0: Failed to start RT ucode: -5
>>> [ 1465.212825] iwlwifi 0000:0a:00.0: Unable to initialize device.
>>> [ 1465.213119] iwlwifi 0000:0a:00.0: L1 Disabled; Enabling L0S
>>> [ 1465.220559] iwlwifi 0000:0a:00.0: Radio type=0x2-0x0-0x0
>>>
>>> Does this mean i have issue with driver/kernel or my wifi card is
>>> broken? I tried copying latest uucode for 2230 wireless card
>>> (http://wireless.kernel.org/en/users/Drivers/iwlwifi?action=AttachFile&do=
>>> get&target=iwlwifi-2030-ucode-18.168.6.1.tgz)
>>> into /lib/firmware and reloading kernel module, no success. Still the
>>> same issue.
>>>
Can you try to add bt_coex_active=0 as debug parameter?
Thanks
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Ilw] Wireless Centrino 2230-N issues
2014-05-30 7:09 ` Emmanuel Grumbach
@ 2014-05-30 7:10 ` Emmanuel Grumbach
2014-05-30 9:30 ` piotr
0 siblings, 1 reply; 10+ messages in thread
From: Emmanuel Grumbach @ 2014-05-30 7:10 UTC (permalink / raw)
To: piotr, linux-wireless
>>
>> I have similar problem. My system is Ubuntu 14.04 with kernel 3.13.0-24
>> installed on a new Toshiba laptop with N2230 wifi card.
>> dmesg:
>> [ 614.007461] iwlwifi 0000:01:00.0: Could not complete ALIVE transition: -5
>> [ 614.007748] iwlwifi 0000:01:00.0: Failed to run INIT ucode: -5
>> [ 614.007790] iwlwifi 0000:01:00.0: Unable to initialize device.
>> [ 614.008318] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
>> [ 614.015390] iwlwifi 0000:01:00.0: Radio type=0x2-0x0-0x0
>> [ 614.059495] iwlwifi 0000:01:00.0: Command COEX_PRIORITY_TABLE_CMD failed:
>> FW Error
>>
>> Is the card broken?
>>
>> Best,
>> Piotr
>>
>>
>
> Can you try to add bt_coex_active=0 as debug parameter?
>
Sorry, I meant *module* parameter. The mode is iwlwifi
Thanks
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Ilw] Wireless Centrino 2230-N issues
2014-05-30 7:10 ` Emmanuel Grumbach
@ 2014-05-30 9:30 ` piotr
2014-06-02 6:16 ` Emmanuel Grumbach
0 siblings, 1 reply; 10+ messages in thread
From: piotr @ 2014-05-30 9:30 UTC (permalink / raw)
To: linux-wireless
Emmanuel Grumbach <egrumbach@...> writes:
>
> >>
> >> I have similar problem. My system is Ubuntu 14.04 with kernel 3.13.0-24
> >> installed on a new Toshiba laptop with N2230 wifi card.
> >> dmesg:
> >> [ 614.007461] iwlwifi 0000:01:00.0: Could not complete ALIVE
transition: -5
> >> [ 614.007748] iwlwifi 0000:01:00.0: Failed to run INIT ucode: -5
> >> [ 614.007790] iwlwifi 0000:01:00.0: Unable to initialize device.
> >> [ 614.008318] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
> >> [ 614.015390] iwlwifi 0000:01:00.0: Radio type=0x2-0x0-0x0
> >> [ 614.059495] iwlwifi 0000:01:00.0: Command COEX_PRIORITY_TABLE_CMD
failed:
> >> FW Error
> >>
> >> Is the card broken?
> >>
> >> Best,
> >> Piotr
> >>
> >>
> >
> > Can you try to add bt_coex_active=0 as debug parameter?
> >
>
> Sorry, I meant *module* parameter. The mode is iwlwifi
Thanks for quick reply.
I've tried your suggestion on the fly:
modprobe -rv iwlwifi
modprobe iwlwifi bt_coex_active=0
After this, I get "N" from "more
/sys/module/iwlwifi/parameters/bt_coex_active", but it seems not to take any
effect on device functioning nor on the kernel messages.
Is this what you meant? BTW, the bluetooth seems to work.
Best,
Piotr
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Ilw] Wireless Centrino 2230-N issues
2014-05-30 9:30 ` piotr
@ 2014-06-02 6:16 ` Emmanuel Grumbach
2014-06-02 22:11 ` piotr
0 siblings, 1 reply; 10+ messages in thread
From: Emmanuel Grumbach @ 2014-06-02 6:16 UTC (permalink / raw)
To: piotr; +Cc: linux-wireless
>>
>> >>
>> >> I have similar problem. My system is Ubuntu 14.04 with kernel 3.13.0-24
>> >> installed on a new Toshiba laptop with N2230 wifi card.
>> >> dmesg:
>> >> [ 614.007461] iwlwifi 0000:01:00.0: Could not complete ALIVE
> transition: -5
>> >> [ 614.007748] iwlwifi 0000:01:00.0: Failed to run INIT ucode: -5
>> >> [ 614.007790] iwlwifi 0000:01:00.0: Unable to initialize device.
>> >> [ 614.008318] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
>> >> [ 614.015390] iwlwifi 0000:01:00.0: Radio type=0x2-0x0-0x0
>> >> [ 614.059495] iwlwifi 0000:01:00.0: Command COEX_PRIORITY_TABLE_CMD
> failed:
>> >> FW Error
>> >>
>> >> Is the card broken?
>> >>
>> >> Best,
>> >> Piotr
>> >>
>> >>
>> >
>> > Can you try to add bt_coex_active=0 as debug parameter?
>> >
>>
>> Sorry, I meant *module* parameter. The mode is iwlwifi
>
> Thanks for quick reply.
>
> I've tried your suggestion on the fly:
>
> modprobe -rv iwlwifi
> modprobe iwlwifi bt_coex_active=0
>
> After this, I get "N" from "more
> /sys/module/iwlwifi/parameters/bt_coex_active", but it seems not to take any
> effect on device functioning nor on the kernel messages.
> Is this what you meant? BTW, the bluetooth seems to work.
>
Can you please send the whole dmesg output?
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Ilw] Wireless Centrino 2230-N issues
2014-06-02 6:16 ` Emmanuel Grumbach
@ 2014-06-02 22:11 ` piotr
2014-06-04 19:25 ` Emmanuel Grumbach
0 siblings, 1 reply; 10+ messages in thread
From: piotr @ 2014-06-02 22:11 UTC (permalink / raw)
To: linux-wireless
Emmanuel Grumbach <egrumbach@...> writes:
>
> Can you please send the whole dmesg output?
[115535.469083] iwlwifi 0000:01:00.0: Could not complete ALIVE transition: -5
[115535.469370] iwlwifi 0000:01:00.0: Failed to run INIT ucode: -5
[115535.469412] iwlwifi 0000:01:00.0: Unable to initialize device.
[115535.471365] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[115535.478424] iwlwifi 0000:01:00.0: Radio type=0x2-0x0-0x0
[115535.525086] iwlwifi 0000:01:00.0: Command COEX_PRIORITY_TABLE_CMD
failed: FW Error
This repeats over and over again.
Piotr
> --
> To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
> the body of a message to majordomo@...
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
>
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Ilw] Wireless Centrino 2230-N issues
2014-06-02 22:11 ` piotr
@ 2014-06-04 19:25 ` Emmanuel Grumbach
2014-06-04 22:55 ` piotr
0 siblings, 1 reply; 10+ messages in thread
From: Emmanuel Grumbach @ 2014-06-04 19:25 UTC (permalink / raw)
To: piotr; +Cc: linux-wireless
>
>>
>> Can you please send the whole dmesg output?
>
> [115535.469083] iwlwifi 0000:01:00.0: Could not complete ALIVE transition: -5
> [115535.469370] iwlwifi 0000:01:00.0: Failed to run INIT ucode: -5
> [115535.469412] iwlwifi 0000:01:00.0: Unable to initialize device.
> [115535.471365] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
> [115535.478424] iwlwifi 0000:01:00.0: Radio type=0x2-0x0-0x0
> [115535.525086] iwlwifi 0000:01:00.0: Command COEX_PRIORITY_TABLE_CMD
> failed: FW Error
>
Ok, please do the following:
modprobe -r iwldvm
modprobe iwlwifi fw_restart=0 debug=0xffffffff
then, please send the whole dmesg output.
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [Ilw] Wireless Centrino 2230-N issues
2014-06-04 19:25 ` Emmanuel Grumbach
@ 2014-06-04 22:55 ` piotr
0 siblings, 0 replies; 10+ messages in thread
From: piotr @ 2014-06-04 22:55 UTC (permalink / raw)
To: linux-wireless
Emmanuel Grumbach <egrumbach@...> writes:
>
> Ok, please do the following:
>
> modprobe -r iwldvm
> modprobe iwlwifi fw_restart=0 debug=0xffffffff
>
> then, please send the whole dmesg output.
Please find below the output of the commands:
piotr@pk:~$ sudo modprobe -rv iwldvm
rmmod iwldvm
rmmod mac80211
rmmod iwlwifi
rmmod cfg80211
piotr@pk:~$ sudo modprobe -v iwlwifi fw_restart=0 debug=0xffffffff
insmod /lib/modules/3.13.0-24-generic/kernel/net/wireless/cfg80211.ko
insmod /lib/modules/3.13.0-24-generic/kernel/drivers
/net/wireless/iwlwifi/iwlwifi.ko fw_restart=0 debug=0xffffffff
piotr@pk:~$ dmesg
[ 976.624087] iwlwifi 0000:01:00.0: Could not complete ALIVE transition: -5
[ 976.624372] iwlwifi 0000:01:00.0: Failed to run INIT ucode: -5
[ 976.624414] iwlwifi 0000:01:00.0: Unable to initialize device.
[ 976.626379] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[ 976.633440] iwlwifi 0000:01:00.0: Radio type=0x2-0x0-0x0
[ 976.680112] iwlwifi 0000:01:00.0: Command COEX_PRIORITY_TABLE_CMD failed:
FW Error
[ 976.680125] iwlwifi 0000:01:00.0: Could not complete ALIVE transition: -5
[ 976.680412] iwlwifi 0000:01:00.0: Failed to run INIT ucode: -5
[ 976.680453] iwlwifi 0000:01:00.0: Unable to initialize device.
[ 976.680957] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[ 976.688020] iwlwifi 0000:01:00.0: Radio type=0x2-0x0-0x0
[ 976.732150] iwlwifi 0000:01:00.0: Command COEX_PRIORITY_TABLE_CMD failed:
FW Error
[ 976.732163] iwlwifi 0000:01:00.0: Could not complete ALIVE transition: -5
[ 976.732449] iwlwifi 0000:01:00.0: Failed to run INIT ucode: -5
[ 976.732490] iwlwifi 0000:01:00.0: Unable to initialize device.
[ 976.734505] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[ 976.741567] iwlwifi 0000:01:00.0: Radio type=0x2-0x0-0x0
[ 976.788131] iwlwifi 0000:01:00.0: Command COEX_PRIORITY_TABLE_CMD failed:
FW Error
[... repeats several times ...]
The kernel messages didn't change. Am I doing something wrong?
Piotr
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2014-06-04 23:25 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-05-11 11:59 Wireless Centrino 2230-N issues Alen Krmelj
2014-05-12 9:32 ` [Ilw] " Grumbach, Emmanuel
2014-05-30 0:20 ` piotr
2014-05-30 7:09 ` Emmanuel Grumbach
2014-05-30 7:10 ` Emmanuel Grumbach
2014-05-30 9:30 ` piotr
2014-06-02 6:16 ` Emmanuel Grumbach
2014-06-02 22:11 ` piotr
2014-06-04 19:25 ` Emmanuel Grumbach
2014-06-04 22:55 ` piotr
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).