linux-wireless.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Mario Limonciello <Mario_Limonciello@Dell.com>
To: cezary.jackiewicz@gmail.com
Cc: linux-wireless@vger.kernel.org, linux-acpi@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Mario Limonciello <Mario_Limonciello@Dell.com>
Subject: [PATCH] compal-laptop: Replace sysfs support with rfkill support
Date: Fri, 21 Aug 2009 16:39:38 -0500	[thread overview]
Message-ID: <1250890778-28959-1-git-send-email-Mario_Limonciello@Dell.com> (raw)
In-Reply-To: <1250706969-10382-1-git-send-email-Mario_Limonciello@Dell.com>

This drops the support for manually groking the files in sysfs
to turn on and off the WLAN and BT for Compal laptops in favor
of platform rfkill support.

It has been combined into a single patch to not introduce regressions
in the process of simply adding rfkill support.

Signed-off-by: Mario Limonciello <Mario_Limonciello@Dell.com>
Reviewed-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
---
 drivers/platform/x86/compal-laptop.c |  203 +++++++++++-----------------------
 1 files changed, 63 insertions(+), 140 deletions(-)

diff --git a/drivers/platform/x86/compal-laptop.c b/drivers/platform/x86/compal-laptop.c
index c1c8c03..2c1ff8f 100644
--- a/drivers/platform/x86/compal-laptop.c
+++ b/drivers/platform/x86/compal-laptop.c
@@ -26,17 +26,8 @@
 /*
  * comapl-laptop.c - Compal laptop support.
  *
- * This driver exports a few files in /sys/devices/platform/compal-laptop/:
- *
- *   wlan - wlan subsystem state: contains 0 or 1 (rw)
- *
- *   bluetooth - Bluetooth subsystem state: contains 0 or 1 (rw)
- *
- *   raw - raw value taken from embedded controller register (ro)
- *
- * In addition to these platform device attributes the driver
- * registers itself in the Linux backlight control subsystem and is
- * available to userspace under /sys/class/backlight/compal-laptop/.
+ * The driver registers itself with the rfkill subsystem and
+ * the Linux backlight control subsystem.
  *
  * This driver might work on other laptops produced by Compal. If you
  * want to try it you can pass force=1 as argument to the module which
@@ -52,6 +43,7 @@
 #include <linux/backlight.h>
 #include <linux/platform_device.h>
 #include <linux/autoconf.h>
+#include <linux/rfkill.h>
 
 #define COMPAL_DRIVER_VERSION "0.2.6"
 
@@ -64,6 +56,10 @@
 #define WLAN_MASK	0x01
 #define BT_MASK 	0x02
 
+static struct rfkill *wifi_rfkill;
+static struct rfkill *bt_rfkill;
+static struct platform_device *compal_device;
+
 static int force;
 module_param(force, bool, 0);
 MODULE_PARM_DESC(force, "Force driver load, ignore DMI data");
@@ -89,65 +85,75 @@ static int get_lcd_level(void)
 	return (int) result;
 }
 
-static int set_wlan_state(int state)
+static int compal_rfkill_set(void *data, bool blocked)
 {
+	unsigned long radio = (unsigned long) data;
 	u8 result, value;
 
 	ec_read(COMPAL_EC_COMMAND_WIRELESS, &result);
 
-	if ((result & KILLSWITCH_MASK) == 0)
-		return -EINVAL;
-	else {
-		if (state)
-			value = (u8) (result | WLAN_MASK);
-		else
-			value = (u8) (result & ~WLAN_MASK);
-		ec_write(COMPAL_EC_COMMAND_WIRELESS, value);
-	}
+	if (!blocked)
+		value = (u8) (result | radio);
+	else
+		value = (u8) (result & ~radio);
+	ec_write(COMPAL_EC_COMMAND_WIRELESS, value);
 
 	return 0;
 }
 
-static int set_bluetooth_state(int state)
+static void compal_rfkill_poll(struct rfkill *rfkill, void *data)
 {
-	u8 result, value;
+	u8 result;
+	bool hw_blocked;
 
 	ec_read(COMPAL_EC_COMMAND_WIRELESS, &result);
 
-	if ((result & KILLSWITCH_MASK) == 0)
-		return -EINVAL;
-	else {
-		if (state)
-			value = (u8) (result | BT_MASK);
-		else
-			value = (u8) (result & ~BT_MASK);
-		ec_write(COMPAL_EC_COMMAND_WIRELESS, value);
-	}
-
-	return 0;
+	hw_blocked = !(result & KILLSWITCH_MASK);
+	rfkill_set_hw_state(rfkill, hw_blocked);
 }
 
-static int get_wireless_state(int *wlan, int *bluetooth)
+static const struct rfkill_ops compal_rfkill_ops = {
+	.poll = compal_rfkill_poll,
+	.set_block = compal_rfkill_set,
+};
+
+static int setup_rfkill(void)
 {
-	u8 result;
+	int ret;
 
-	ec_read(COMPAL_EC_COMMAND_WIRELESS, &result);
+	wifi_rfkill = rfkill_alloc("compal-wifi", &compal_device->dev,
+				RFKILL_TYPE_WLAN, &compal_rfkill_ops,
+				(void *) WLAN_MASK);
+	if (!wifi_rfkill)
+		return -ENOMEM;
 
-	if (wlan) {
-		if ((result & KILLSWITCH_MASK) == 0)
-			*wlan = 0;
-		else
-			*wlan = result & WLAN_MASK;
-	}
+	ret = rfkill_register(wifi_rfkill);
+	if (ret)
+		goto err_wifi;
 
-	if (bluetooth) {
-		if ((result & KILLSWITCH_MASK) == 0)
-			*bluetooth = 0;
-		else
-			*bluetooth = (result & BT_MASK) >> 1;
+	bt_rfkill = rfkill_alloc("compal-bluetooth", &compal_device->dev,
+				RFKILL_TYPE_BLUETOOTH, &compal_rfkill_ops,
+				(void *) BT_MASK);
+	if (!bt_rfkill) {
+		ret = -ENOMEM;
+		goto err_allocate_bt;
 	}
+	ret = rfkill_register(bt_rfkill);
+	if (ret)
+		goto err_register_bt;
 
 	return 0;
+
+err_register_bt:
+	rfkill_destroy(bt_rfkill);
+
+err_allocate_bt:
+	rfkill_unregister(wifi_rfkill);
+
+err_wifi:
+	rfkill_destroy(wifi_rfkill);
+
+	return ret;
 }
 
 /* Backlight device stuff */
@@ -170,86 +176,6 @@ static struct backlight_ops compalbl_ops = {
 
 static struct backlight_device *compalbl_device;
 
-/* Platform device */
-
-static ssize_t show_wlan(struct device *dev,
-	struct device_attribute *attr, char *buf)
-{
-	int ret, enabled;
-
-	ret = get_wireless_state(&enabled, NULL);
-	if (ret < 0)
-		return ret;
-
-	return sprintf(buf, "%i\n", enabled);
-}
-
-static ssize_t show_raw(struct device *dev,
-	struct device_attribute *attr, char *buf)
-{
-	u8 result;
-
-	ec_read(COMPAL_EC_COMMAND_WIRELESS, &result);
-
-	return sprintf(buf, "%i\n", result);
-}
-
-static ssize_t show_bluetooth(struct device *dev,
-	struct device_attribute *attr, char *buf)
-{
-	int ret, enabled;
-
-	ret = get_wireless_state(NULL, &enabled);
-	if (ret < 0)
-		return ret;
-
-	return sprintf(buf, "%i\n", enabled);
-}
-
-static ssize_t store_wlan_state(struct device *dev,
-	struct device_attribute *attr, const char *buf, size_t count)
-{
-	int state, ret;
-
-	if (sscanf(buf, "%i", &state) != 1 || (state < 0 || state > 1))
-		return -EINVAL;
-
-	ret = set_wlan_state(state);
-	if (ret < 0)
-		return ret;
-
-	return count;
-}
-
-static ssize_t store_bluetooth_state(struct device *dev,
-	struct device_attribute *attr, const char *buf, size_t count)
-{
-	int state, ret;
-
-	if (sscanf(buf, "%i", &state) != 1 || (state < 0 || state > 1))
-		return -EINVAL;
-
-	ret = set_bluetooth_state(state);
-	if (ret < 0)
-		return ret;
-
-	return count;
-}
-
-static DEVICE_ATTR(bluetooth, 0644, show_bluetooth, store_bluetooth_state);
-static DEVICE_ATTR(wlan, 0644, show_wlan, store_wlan_state);
-static DEVICE_ATTR(raw, 0444, show_raw, NULL);
-
-static struct attribute *compal_attributes[] = {
-	&dev_attr_bluetooth.attr,
-	&dev_attr_wlan.attr,
-	&dev_attr_raw.attr,
-	NULL
-};
-
-static struct attribute_group compal_attribute_group = {
-	.attrs = compal_attributes
-};
 
 static struct platform_driver compal_driver = {
 	.driver = {
@@ -258,8 +184,6 @@ static struct platform_driver compal_driver = {
 	}
 };
 
-static struct platform_device *compal_device;
-
 /* Initialization */
 
 static int dmi_check_cb(const struct dmi_system_id *id)
@@ -390,23 +314,19 @@ static int __init compal_init(void)
 
 	ret = platform_device_add(compal_device);
 	if (ret)
-		goto fail_platform_device1;
+		goto fail_platform_device;
 
-	ret = sysfs_create_group(&compal_device->dev.kobj,
-		&compal_attribute_group);
+	ret = setup_rfkill();
 	if (ret)
-		goto fail_platform_device2;
+		goto fail_rfkill;
 
 	printk(KERN_INFO "compal-laptop: driver "COMPAL_DRIVER_VERSION
 		" successfully loaded.\n");
 
 	return 0;
 
-fail_platform_device2:
-
-	platform_device_del(compal_device);
-
-fail_platform_device1:
+fail_rfkill:
+fail_platform_device:
 
 	platform_device_put(compal_device);
 
@@ -424,10 +344,13 @@ fail_backlight:
 static void __exit compal_cleanup(void)
 {
 
-	sysfs_remove_group(&compal_device->dev.kobj, &compal_attribute_group);
 	platform_device_unregister(compal_device);
 	platform_driver_unregister(&compal_driver);
 	backlight_device_unregister(compalbl_device);
+	rfkill_unregister(wifi_rfkill);
+	rfkill_destroy(wifi_rfkill);
+	rfkill_unregister(bt_rfkill);
+	rfkill_destroy(bt_rfkill);
 
 	printk(KERN_INFO "compal-laptop: driver unloaded.\n");
 }
-- 
1.6.3.3


  parent reply	other threads:[~2009-08-21 21:39 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-08-19 18:36 [PATCH 2/3] Add rfkill support to compal-laptop Mario Limonciello
2009-08-19 18:42 ` Johannes Berg
2009-08-19 18:47   ` Mario Limonciello
2009-08-20  8:52     ` Alan Jenkins
2009-08-21 21:39 ` Mario Limonciello [this message]
2009-08-22 11:20   ` [PATCH] compal-laptop: Replace sysfs support with rfkill support Alan Jenkins
2009-08-24 19:50     ` Mario Limonciello
2009-08-25  8:15       ` Alan Jenkins

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1250890778-28959-1-git-send-email-Mario_Limonciello@Dell.com \
    --to=mario_limonciello@dell.com \
    --cc=cezary.jackiewicz@gmail.com \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).