From: Ohad Ben-Cohen <ohad@wizery.com>
To: <linux-wireless@vger.kernel.org>, <linux-mmc@vger.kernel.org>,
<linux-omap@vger.kernel.org>
Cc: <linux-arm-kernel@lists.infradead.org>, <linux@arm.linux.org.uk>,
Chikkature Rajashekar Madhusudhan <madhu.cr@ti.com>,
Luciano Coelho <luciano.coelho@nokia.com>,
<akpm@linux-foundation.org>, San Mehat <san@google.com>,
Roger Quadros <roger.quadros@nokia.com>,
Tony Lindgren <tony@atomide.com>,
Nicolas Pitre <nico@fluxnic.net>,
Pandita Vikram <vikram.pandita@ti.com>,
Kalle Valo <kalle.valo@iki.fi>, Ohad Ben-Cohen <ohad@wizery.com>
Subject: [PATCH v2 11/20] omap: hsmmc: support mmc3 regulator power control
Date: Wed, 21 Jul 2010 20:33:45 +0300 [thread overview]
Message-ID: <1279733634-21974-12-git-send-email-ohad@wizery.com> (raw)
In-Reply-To: <1279733634-21974-1-git-send-email-ohad@wizery.com>
Prepare for mmc3 regulator power control by splitting the power
control functions of mmc2 and mmc3, and expecting mmc3 to have
a single, dedicated, regulator support.
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
---
arch/arm/mach-omap2/hsmmc.c | 10 ++++--
drivers/mmc/host/omap_hsmmc.c | 67 ++++++++++++++++++++++++++++++++++++----
2 files changed, 66 insertions(+), 11 deletions(-)
diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
index 1ef54b0..5d3d789 100644
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -174,7 +174,7 @@ static void omap4_hsmmc1_after_set_reg(struct device *dev, int slot,
}
}
-static void hsmmc23_before_set_reg(struct device *dev, int slot,
+static void hsmmc2_before_set_reg(struct device *dev, int slot,
int power_on, int vdd)
{
struct omap_mmc_platform_data *mmc = dev->platform_data;
@@ -325,14 +325,16 @@ void __init omap2_hsmmc_init(struct omap2_hsmmc_info *controllers)
c->transceiver = 1;
if (c->transceiver && c->wires > 4)
c->wires = 4;
- /* FALLTHROUGH */
- case 3:
if (mmc->slots[0].features & HSMMC_HAS_PBIAS) {
/* off-chip level shifting, or none */
- mmc->slots[0].before_set_reg = hsmmc23_before_set_reg;
+ mmc->slots[0].before_set_reg = hsmmc2_before_set_reg;
mmc->slots[0].after_set_reg = NULL;
}
break;
+ case 3:
+ mmc->slots[0].before_set_reg = NULL;
+ mmc->slots[0].after_set_reg = NULL;
+ break;
default:
pr_err("MMC%d configuration not supported!\n", c->mmc);
kfree(mmc);
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index b032828..4c5a669 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -258,7 +258,7 @@ static int omap_hsmmc_1_set_power(struct device *dev, int slot, int power_on,
return ret;
}
-static int omap_hsmmc_23_set_power(struct device *dev, int slot, int power_on,
+static int omap_hsmmc_2_set_power(struct device *dev, int slot, int power_on,
int vdd)
{
struct omap_hsmmc_host *host =
@@ -309,6 +309,31 @@ static int omap_hsmmc_23_set_power(struct device *dev, int slot, int power_on,
return ret;
}
+static int omap_hsmmc_3_set_power(struct device *dev, int slot, int power_on,
+ int vdd)
+{
+ struct omap_hsmmc_host *host =
+ platform_get_drvdata(to_platform_device(dev));
+ int ret = 0;
+
+ if (power_on) {
+ ret = mmc_regulator_set_ocr(host->vcc, vdd);
+ /* Enable interface voltage rail, if needed */
+ if (ret == 0 && host->vcc) {
+ ret = regulator_enable(host->vcc);
+ if (ret < 0)
+ ret = mmc_regulator_set_ocr(host->vcc, 0);
+ }
+ } else {
+ if (host->vcc)
+ ret = regulator_disable(host->vcc);
+ if (ret == 0)
+ ret = mmc_regulator_set_ocr(host->vcc, 0);
+ }
+
+ return ret;
+}
+
static int omap_hsmmc_1_set_sleep(struct device *dev, int slot, int sleep,
int vdd, int cardsleep)
{
@@ -319,7 +344,7 @@ static int omap_hsmmc_1_set_sleep(struct device *dev, int slot, int sleep,
return regulator_set_mode(host->vcc, mode);
}
-static int omap_hsmmc_23_set_sleep(struct device *dev, int slot, int sleep,
+static int omap_hsmmc_2_set_sleep(struct device *dev, int slot, int sleep,
int vdd, int cardsleep)
{
struct omap_hsmmc_host *host =
@@ -358,6 +383,31 @@ static int omap_hsmmc_23_set_sleep(struct device *dev, int slot, int sleep,
return regulator_enable(host->vcc_aux);
}
+static int omap_hsmmc_3_set_sleep(struct device *dev, int slot, int sleep,
+ int vdd, int cardsleep)
+{
+ struct omap_hsmmc_host *host =
+ platform_get_drvdata(to_platform_device(dev));
+ int err = 0;
+
+ /*
+ * If we don't see a Vcc regulator, assume it's a fixed
+ * voltage always-on regulator.
+ */
+ if (!host->vcc)
+ return 0;
+
+ if (cardsleep) {
+ /* VCC can be turned off if card is asleep */
+ if (sleep)
+ err = mmc_regulator_set_ocr(host->vcc, 0);
+ else
+ err = mmc_regulator_set_ocr(host->vcc, vdd);
+ }
+
+ return err;
+}
+
static int omap_hsmmc_reg_get(struct omap_hsmmc_host *host)
{
struct regulator *reg;
@@ -370,10 +420,13 @@ static int omap_hsmmc_reg_get(struct omap_hsmmc_host *host)
mmc_slot(host).set_sleep = omap_hsmmc_1_set_sleep;
break;
case OMAP_MMC2_DEVID:
- case OMAP_MMC3_DEVID:
/* Off-chip level shifting, or none */
- mmc_slot(host).set_power = omap_hsmmc_23_set_power;
- mmc_slot(host).set_sleep = omap_hsmmc_23_set_sleep;
+ mmc_slot(host).set_power = omap_hsmmc_2_set_power;
+ mmc_slot(host).set_sleep = omap_hsmmc_2_set_sleep;
+ break;
+ case OMAP_MMC3_DEVID:
+ mmc_slot(host).set_power = omap_hsmmc_3_set_power;
+ mmc_slot(host).set_sleep = omap_hsmmc_3_set_sleep;
break;
default:
pr_err("MMC%d configuration not supported!\n", host->id);
@@ -386,9 +439,9 @@ static int omap_hsmmc_reg_get(struct omap_hsmmc_host *host)
/*
* HACK: until fixed.c regulator is usable,
* we don't require a main regulator
- * for MMC2 or MMC3
+ * for MMC2
*/
- if (host->id == OMAP_MMC1_DEVID) {
+ if (host->id != OMAP_MMC2_DEVID) {
ret = PTR_ERR(reg);
goto err;
}
--
1.7.0.4
next prev parent reply other threads:[~2010-07-21 17:35 UTC|newest]
Thread overview: 61+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-07-21 17:33 [PATCH v2 00/20] native support for wl1271 on ZOOM Ohad Ben-Cohen
2010-07-21 17:33 ` [PATCH v2 01/20] sdio: add TI + wl1271 ids Ohad Ben-Cohen
2010-07-21 17:58 ` Marcel Holtmann
2010-07-22 23:38 ` Ohad Ben-Cohen
2010-07-21 17:33 ` [PATCH v2 02/20] wireless: wl1271: remove SDIO IDs from driver Ohad Ben-Cohen
2010-07-21 17:33 ` [PATCH v2 03/20] mmc: support embedded data field in mmc_host Ohad Ben-Cohen
2010-07-28 19:47 ` Vitaly Wool
2010-07-29 6:00 ` Ohad Ben-Cohen
2010-07-29 16:16 ` Vitaly Wool
2010-08-02 15:54 ` Ohad Ben-Cohen
2010-08-02 16:25 ` Vitaly Wool
2010-08-02 21:35 ` Ohad Ben-Cohen
2010-08-03 14:17 ` Vitaly Wool
2010-08-04 11:24 ` Ohad Ben-Cohen
2010-08-04 11:41 ` Russell King - ARM Linux
2010-08-04 12:42 ` Ohad Ben-Cohen
2010-08-04 14:01 ` Vitaly Wool
2010-08-06 7:07 ` Linus Walleij
2010-08-06 10:02 ` Ohad Ben-Cohen
2010-08-06 14:46 ` Russell King - ARM Linux
2010-08-06 16:53 ` Nicolas Pitre
2010-07-21 17:33 ` [PATCH v2 04/20] omap zoom2: wlan board muxing Ohad Ben-Cohen
2010-07-21 17:33 ` [PATCH v2 05/20] omap zoom3: " Ohad Ben-Cohen
2010-07-21 17:33 ` [PATCH v2 06/20] wireless: wl1271: make wl12xx.h common to both spi and sdio Ohad Ben-Cohen
2010-07-21 17:33 ` [PATCH v2 07/20] wireless: wl1271: support return value for the set power func Ohad Ben-Cohen
2010-07-21 17:33 ` [PATCH v2 08/20] wireless: wl1271: take irq info from private board data Ohad Ben-Cohen
2010-07-21 17:33 ` [PATCH v2 09/20] wireless: wl1271: make ref_clock configurable by board Ohad Ben-Cohen
2010-07-21 17:33 ` [PATCH v2 10/20] omap: zoom: add fixed regulator device for wlan Ohad Ben-Cohen
2010-07-21 17:59 ` Mark Brown
2010-07-22 11:16 ` Roger Quadros
2010-07-22 23:13 ` Ohad Ben-Cohen
2010-07-23 9:15 ` Mark Brown
2010-07-25 10:40 ` Ohad Ben-Cohen
2010-07-21 17:33 ` Ohad Ben-Cohen [this message]
2010-07-21 17:33 ` [PATCH v2 12/20] omap: hsmmc: allow board-specific settings of private mmc data Ohad Ben-Cohen
2010-07-21 17:33 ` [PATCH v2 13/20] omap: zoom: add mmc3/wl1271 device support Ohad Ben-Cohen
2010-07-21 17:33 ` [PATCH v2 14/20] mmc: sdio: fully reconfigure oldcard on resume Ohad Ben-Cohen
2010-07-21 17:33 ` [PATCH v2 15/20] mmc: sdio: verify existence of resume handler Ohad Ben-Cohen
2010-07-21 17:33 ` [PATCH v2 16/20] mmc: introduce API to control the card's power Ohad Ben-Cohen
2010-07-21 17:33 ` [PATCH v2 17/20] mmc: sdio: relocate sdio_set_block_size call Ohad Ben-Cohen
2010-07-21 17:33 ` [PATCH v2 18/20] mmc: sdio: enable a default power off mode of the card Ohad Ben-Cohen
2010-07-22 11:35 ` Roger Quadros
2010-07-25 12:40 ` Ohad Ben-Cohen
2010-07-25 13:56 ` Nicolas Pitre
2010-07-25 14:05 ` Ohad Ben-Cohen
2010-07-21 17:33 ` [PATCH v2 19/20] omap: zoom: keep the MMC3 wl1271 device powered off Ohad Ben-Cohen
2010-07-21 18:55 ` Gabay, Benzy
2010-07-22 23:18 ` Ohad Ben-Cohen
2010-07-26 18:33 ` Gabay, Benzy
2010-07-21 17:33 ` [PATCH v2 20/20] wireless: wl1271: call SDIO claim/release power API Ohad Ben-Cohen
2010-07-22 22:56 ` [PATCH v2 00/20] native support for wl1271 on ZOOM Nicolas Pitre
2010-07-22 23:56 ` Ohad Ben-Cohen
2010-07-26 19:30 ` John W. Linville
2010-07-27 9:32 ` Ohad Ben-Cohen
2010-08-02 8:16 ` Luciano Coelho
2010-08-02 11:42 ` Tony Lindgren
2010-08-02 12:08 ` Ohad Ben-Cohen
2010-08-02 15:12 ` Vitaly Wool
2010-08-02 15:59 ` Ohad Ben-Cohen
2010-08-02 16:19 ` Vitaly Wool
2010-08-02 16:40 ` Ohad Ben-Cohen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1279733634-21974-12-git-send-email-ohad@wizery.com \
--to=ohad@wizery.com \
--cc=akpm@linux-foundation.org \
--cc=kalle.valo@iki.fi \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=luciano.coelho@nokia.com \
--cc=madhu.cr@ti.com \
--cc=nico@fluxnic.net \
--cc=roger.quadros@nokia.com \
--cc=san@google.com \
--cc=tony@atomide.com \
--cc=vikram.pandita@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).