* [PATCH 0/25] rt2800: add experimental support for 5592 chip
@ 2013-03-16 18:19 stf_xl
2013-03-16 18:19 ` [PATCH 01/25] rt2800: do not crash if spec->channels is NULL stf_xl
` (25 more replies)
0 siblings, 26 replies; 27+ messages in thread
From: stf_xl @ 2013-03-16 18:19 UTC (permalink / raw)
To: John W. Linville"; +Cc: linux-wireless, users
This patch set add support for 5592 a new Ralink wlan chip. Register
programming code is all is based on Ralink linux driver available at
(despite the url it linux driver download web page ):
http://www.mediatek.com/_en/07_downloads/01_windows.php?sn=501
Currently only support for USB devices is added, PCIe is on the way
together with some other changes that will clean BBP/RF rt2800
programming code, which is now quite Lionel (messy :-).
Kconfig | 7
rt2800.h | 103 ++++++-
rt2800lib.c | 857 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++----
rt2800pci.c | 5
rt2800usb.c | 63 ++++
rt2x00.h | 10
6 files changed, 989 insertions(+), 56 deletions(-)
^ permalink raw reply [flat|nested] 27+ messages in thread
* [PATCH 01/25] rt2800: do not crash if spec->channels is NULL
2013-03-16 18:19 [PATCH 0/25] rt2800: add experimental support for 5592 chip stf_xl
@ 2013-03-16 18:19 ` stf_xl
2013-03-16 18:19 ` [PATCH 02/25] rt2800: 5592: early defines stf_xl
` (24 subsequent siblings)
25 siblings, 0 replies; 27+ messages in thread
From: stf_xl @ 2013-03-16 18:19 UTC (permalink / raw)
To: John W. Linville"; +Cc: linux-wireless, users, Stanislaw Gruszka
From: Stanislaw Gruszka <stf_xl@wp.pl>
In case the spec->channels was not specified, print warning instead
of hard crash the kernel.
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
---
drivers/net/wireless/rt2x00/rt2800lib.c | 3 +++
1 files changed, 3 insertions(+), 0 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index a658b4b..182e598 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -5213,6 +5213,9 @@ static int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
spec->channels = rf_vals_3x;
}
+ if (WARN_ON_ONCE(!spec->channels))
+ return -ENODEV;
+
/*
* Initialize HT information.
*/
--
1.7.4.4
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 02/25] rt2800: 5592: early defines
2013-03-16 18:19 [PATCH 0/25] rt2800: add experimental support for 5592 chip stf_xl
2013-03-16 18:19 ` [PATCH 01/25] rt2800: do not crash if spec->channels is NULL stf_xl
@ 2013-03-16 18:19 ` stf_xl
2013-03-16 18:19 ` [PATCH 03/25] rt2800: 5592: add channels table stf_xl
` (23 subsequent siblings)
25 siblings, 0 replies; 27+ messages in thread
From: stf_xl @ 2013-03-16 18:19 UTC (permalink / raw)
To: John W. Linville"; +Cc: linux-wireless, users, Stanislaw Gruszka
From: Stanislaw Gruszka <stf_xl@wp.pl>
Add basic defines for 5592 chip. It can not be enabled until
CONFIG_RT2800USB_RT55XX configuration option will be provided in the
Kconfig.
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
---
drivers/net/wireless/rt2x00/rt2800.h | 2 ++
drivers/net/wireless/rt2x00/rt2800lib.c | 2 ++
drivers/net/wireless/rt2x00/rt2800usb.c | 3 +++
drivers/net/wireless/rt2x00/rt2x00.h | 1 +
4 files changed, 8 insertions(+), 0 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h
index 4db1088..58c0164 100644
--- a/drivers/net/wireless/rt2x00/rt2800.h
+++ b/drivers/net/wireless/rt2x00/rt2800.h
@@ -51,6 +51,7 @@
* RF3320 2.4G 1T1R(RT3350/RT3370/RT3390)
* RF3322 2.4G 2T2R(RT3352/RT3371/RT3372/RT3391/RT3392)
* RF3053 2.4G/5G 3T3R(RT3883/RT3563/RT3573/RT3593/RT3662)
+ * RF5592 2.4G/5G 2T2R
* RF5360 2.4G 1T1R
* RF5370 2.4G 1T1R
* RF5390 2.4G 1T1R
@@ -68,6 +69,7 @@
#define RF3320 0x000b
#define RF3322 0x000c
#define RF3053 0x000d
+#define RF5592 0x000f
#define RF3290 0x3290
#define RF5360 0x5360
#define RF5370 0x5370
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 182e598..45f58c9 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -4863,6 +4863,7 @@ static int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev)
case RT3572:
case RT5390:
case RT5392:
+ case RT5592:
break;
default:
ERROR(rt2x00dev, "Invalid RT chipset 0x%04x detected.\n", rt2x00dev->chip.rt);
@@ -4887,6 +4888,7 @@ static int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev)
case RF5372:
case RF5390:
case RF5392:
+ case RF5592:
break;
default:
ERROR(rt2x00dev, "Invalid RF chipset 0x%04x detected.\n",
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index 098613e..f9ca795 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -1200,6 +1200,9 @@ static struct usb_device_id rt2800usb_device_table[] = {
{ USB_DEVICE(0x148f, 0x5370) },
{ USB_DEVICE(0x148f, 0x5372) },
#endif
+#ifdef CONFIG_RT2800USB_RT55XX
+ { USB_DEVICE(0x148f, 0x5572) },
+#endif
#ifdef CONFIG_RT2800USB_UNKNOWN
/*
* Unclear what kind of devices these are (they aren't supported by the
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index 086abb4..4251835 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -193,6 +193,7 @@ struct rt2x00_chip {
#define RT3883 0x3883 /* WSOC */
#define RT5390 0x5390 /* 2.4GHz */
#define RT5392 0x5392 /* 2.4GHz */
+#define RT5592 0x5592
u16 rf;
u16 rev;
--
1.7.4.4
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 03/25] rt2800: 5592: add channels table
2013-03-16 18:19 [PATCH 0/25] rt2800: add experimental support for 5592 chip stf_xl
2013-03-16 18:19 ` [PATCH 01/25] rt2800: do not crash if spec->channels is NULL stf_xl
2013-03-16 18:19 ` [PATCH 02/25] rt2800: 5592: early defines stf_xl
@ 2013-03-16 18:19 ` stf_xl
2013-03-16 18:19 ` [PATCH 04/25] rt2800: 5592: channel config stub stf_xl
` (22 subsequent siblings)
25 siblings, 0 replies; 27+ messages in thread
From: stf_xl @ 2013-03-16 18:19 UTC (permalink / raw)
To: John W. Linville"; +Cc: linux-wireless, users, Stanislaw Gruszka
From: Stanislaw Gruszka <stf_xl@wp.pl>
Based on:
RT5592_ChipSwitchChannel()
RT5592_Frequency_Plan_Xtal20M[]
RT5592_Frequency_Plan_Xtal40M[]
from:
DPO_RT5572_LinuxSTA_2.6.1.3_20121022/chips/rt5592.c
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
---
drivers/net/wireless/rt2x00/rt2800.h | 6 ++
drivers/net/wireless/rt2x00/rt2800lib.c | 144 +++++++++++++++++++++++++++++++
2 files changed, 150 insertions(+), 0 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h
index 58c0164..b72f71d 100644
--- a/drivers/net/wireless/rt2x00/rt2800.h
+++ b/drivers/net/wireless/rt2x00/rt2800.h
@@ -692,6 +692,12 @@
#define GPIO_SWITCH_7 FIELD32(0x00000080)
/*
+ * FIXME: where the DEBUG_INDEX name come from?
+ */
+#define MAC_DEBUG_INDEX 0x05e8
+#define MAC_DEBUG_INDEX_XTAL FIELD32(0x80000000)
+
+/*
* MAC Control/Status Registers(CSR).
* Some values are set in TU, whereas 1 TU == 1024 us.
*/
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 45f58c9..45f0338 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -5124,6 +5124,138 @@ static const struct rf_channel rf_vals_3x[] = {
{173, 0x61, 0, 9},
};
+static const struct rf_channel rf_vals_5592_xtal20[] = {
+ /* Channel, N, K, mod, R */
+ {1, 482, 4, 10, 3},
+ {2, 483, 4, 10, 3},
+ {3, 484, 4, 10, 3},
+ {4, 485, 4, 10, 3},
+ {5, 486, 4, 10, 3},
+ {6, 487, 4, 10, 3},
+ {7, 488, 4, 10, 3},
+ {8, 489, 4, 10, 3},
+ {9, 490, 4, 10, 3},
+ {10, 491, 4, 10, 3},
+ {11, 492, 4, 10, 3},
+ {12, 493, 4, 10, 3},
+ {13, 494, 4, 10, 3},
+ {14, 496, 8, 10, 3},
+ {36, 172, 8, 12, 1},
+ {38, 173, 0, 12, 1},
+ {40, 173, 4, 12, 1},
+ {42, 173, 8, 12, 1},
+ {44, 174, 0, 12, 1},
+ {46, 174, 4, 12, 1},
+ {48, 174, 8, 12, 1},
+ {50, 175, 0, 12, 1},
+ {52, 175, 4, 12, 1},
+ {54, 175, 8, 12, 1},
+ {56, 176, 0, 12, 1},
+ {58, 176, 4, 12, 1},
+ {60, 176, 8, 12, 1},
+ {62, 177, 0, 12, 1},
+ {64, 177, 4, 12, 1},
+ {100, 183, 4, 12, 1},
+ {102, 183, 8, 12, 1},
+ {104, 184, 0, 12, 1},
+ {106, 184, 4, 12, 1},
+ {108, 184, 8, 12, 1},
+ {110, 185, 0, 12, 1},
+ {112, 185, 4, 12, 1},
+ {114, 185, 8, 12, 1},
+ {116, 186, 0, 12, 1},
+ {118, 186, 4, 12, 1},
+ {120, 186, 8, 12, 1},
+ {122, 187, 0, 12, 1},
+ {124, 187, 4, 12, 1},
+ {126, 187, 8, 12, 1},
+ {128, 188, 0, 12, 1},
+ {130, 188, 4, 12, 1},
+ {132, 188, 8, 12, 1},
+ {134, 189, 0, 12, 1},
+ {136, 189, 4, 12, 1},
+ {138, 189, 8, 12, 1},
+ {140, 190, 0, 12, 1},
+ {149, 191, 6, 12, 1},
+ {151, 191, 10, 12, 1},
+ {153, 192, 2, 12, 1},
+ {155, 192, 6, 12, 1},
+ {157, 192, 10, 12, 1},
+ {159, 193, 2, 12, 1},
+ {161, 193, 6, 12, 1},
+ {165, 194, 2, 12, 1},
+ {184, 164, 0, 12, 1},
+ {188, 164, 4, 12, 1},
+ {192, 165, 8, 12, 1},
+ {196, 166, 0, 12, 1},
+};
+
+static const struct rf_channel rf_vals_5592_xtal40[] = {
+ /* Channel, N, K, mod, R */
+ {1, 241, 2, 10, 3},
+ {2, 241, 7, 10, 3},
+ {3, 242, 2, 10, 3},
+ {4, 242, 7, 10, 3},
+ {5, 243, 2, 10, 3},
+ {6, 243, 7, 10, 3},
+ {7, 244, 2, 10, 3},
+ {8, 244, 7, 10, 3},
+ {9, 245, 2, 10, 3},
+ {10, 245, 7, 10, 3},
+ {11, 246, 2, 10, 3},
+ {12, 246, 7, 10, 3},
+ {13, 247, 2, 10, 3},
+ {14, 248, 4, 10, 3},
+ {36, 86, 4, 12, 1},
+ {38, 86, 6, 12, 1},
+ {40, 86, 8, 12, 1},
+ {42, 86, 10, 12, 1},
+ {44, 87, 0, 12, 1},
+ {46, 87, 2, 12, 1},
+ {48, 87, 4, 12, 1},
+ {50, 87, 6, 12, 1},
+ {52, 87, 8, 12, 1},
+ {54, 87, 10, 12, 1},
+ {56, 88, 0, 12, 1},
+ {58, 88, 2, 12, 1},
+ {60, 88, 4, 12, 1},
+ {62, 88, 6, 12, 1},
+ {64, 88, 8, 12, 1},
+ {100, 91, 8, 12, 1},
+ {102, 91, 10, 12, 1},
+ {104, 92, 0, 12, 1},
+ {106, 92, 2, 12, 1},
+ {108, 92, 4, 12, 1},
+ {110, 92, 6, 12, 1},
+ {112, 92, 8, 12, 1},
+ {114, 92, 10, 12, 1},
+ {116, 93, 0, 12, 1},
+ {118, 93, 2, 12, 1},
+ {120, 93, 4, 12, 1},
+ {122, 93, 6, 12, 1},
+ {124, 93, 8, 12, 1},
+ {126, 93, 10, 12, 1},
+ {128, 94, 0, 12, 1},
+ {130, 94, 2, 12, 1},
+ {132, 94, 4, 12, 1},
+ {134, 94, 6, 12, 1},
+ {136, 94, 8, 12, 1},
+ {138, 94, 10, 12, 1},
+ {140, 95, 0, 12, 1},
+ {149, 95, 9, 12, 1},
+ {151, 95, 11, 12, 1},
+ {153, 96, 1, 12, 1},
+ {155, 96, 3, 12, 1},
+ {157, 96, 5, 12, 1},
+ {159, 96, 7, 12, 1},
+ {161, 96, 9, 12, 1},
+ {165, 97, 1, 12, 1},
+ {184, 82, 0, 12, 1},
+ {188, 82, 4, 12, 1},
+ {192, 82, 8, 12, 1},
+ {196, 83, 0, 12, 1},
+};
+
static int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
{
struct hw_mode_spec *spec = &rt2x00dev->spec;
@@ -5132,6 +5264,7 @@ static int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
char *default_power2;
unsigned int i;
u16 eeprom;
+ u32 reg;
/*
* Disable powersaving as default on PCI devices.
@@ -5213,6 +5346,17 @@ static int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
spec->supported_bands |= SUPPORT_BAND_5GHZ;
spec->num_channels = ARRAY_SIZE(rf_vals_3x);
spec->channels = rf_vals_3x;
+ } else if (rt2x00_rf(rt2x00dev, RF5592)) {
+ spec->supported_bands |= SUPPORT_BAND_5GHZ;
+
+ rt2800_register_read(rt2x00dev, MAC_DEBUG_INDEX, ®);
+ if (rt2x00_get_field32(reg, MAC_DEBUG_INDEX_XTAL)) {
+ spec->num_channels = ARRAY_SIZE(rf_vals_5592_xtal40);
+ spec->channels = rf_vals_5592_xtal40;
+ } else {
+ spec->num_channels = ARRAY_SIZE(rf_vals_5592_xtal20);
+ spec->channels = rf_vals_5592_xtal20;
+ }
}
if (WARN_ON_ONCE(!spec->channels))
--
1.7.4.4
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 04/25] rt2800: 5592: channel config stub
2013-03-16 18:19 [PATCH 0/25] rt2800: add experimental support for 5592 chip stf_xl
` (2 preceding siblings ...)
2013-03-16 18:19 ` [PATCH 03/25] rt2800: 5592: add channels table stf_xl
@ 2013-03-16 18:19 ` stf_xl
2013-03-16 18:19 ` [PATCH 05/25] rt2800: 5592: MAC registers initalization stf_xl
` (21 subsequent siblings)
25 siblings, 0 replies; 27+ messages in thread
From: stf_xl @ 2013-03-16 18:19 UTC (permalink / raw)
To: John W. Linville"; +Cc: linux-wireless, users, Stanislaw Gruszka
From: Stanislaw Gruszka <stf_xl@wp.pl>
Based on:
RT5592_ChipSwitchChannel()
from:
DPO_RT5572_LinuxSTA_2.6.1.3_20121022/chips/rt5592.c
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
---
drivers/net/wireless/rt2x00/rt2800.h | 11 ++
drivers/net/wireless/rt2x00/rt2800lib.c | 255 +++++++++++++++++++++++++++++++
2 files changed, 266 insertions(+), 0 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h
index b72f71d..acb5e62 100644
--- a/drivers/net/wireless/rt2x00/rt2800.h
+++ b/drivers/net/wireless/rt2x00/rt2800.h
@@ -2030,9 +2030,18 @@ struct mac_iveiv_entry {
#define RFCSR7_BITS67 FIELD8(0xc0)
/*
+ * RFCSR 9:
+ */
+#define RFCSR9_K FIELD8(0x0f)
+#define RFCSR9_N FIELD8(0x10)
+#define RFCSR9_UNKNOWN FIELD8(0x60)
+#define RFCSR9_MOD FIELD8(0x80)
+
+/*
* RFCSR 11:
*/
#define RFCSR11_R FIELD8(0x03)
+#define RFCSR11_MOD FIELD8(0xc0)
/*
* RFCSR 12:
@@ -2138,11 +2147,13 @@ struct mac_iveiv_entry {
* RFCSR 49:
*/
#define RFCSR49_TX FIELD8(0x3f)
+#define RFCSR49_EP FIELD8(0xc0)
/*
* RFCSR 50:
*/
#define RFCSR50_TX FIELD8(0x3f)
+#define RFCSR50_EP FIELD8(0xc0)
/*
* RF registers
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 45f0338..079086b 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -1988,6 +1988,7 @@ static void rt2800_config_channel_rf3052(struct rt2x00_dev *rt2x00dev,
}
#define POWER_BOUND 0x27
+#define POWER_BOUND_5G 0x2b
#define FREQ_OFFSET_BOUND 0x5f
static void rt2800_config_channel_rf3290(struct rt2x00_dev *rt2x00dev,
@@ -2184,6 +2185,257 @@ static void rt2800_config_channel_rf53xx(struct rt2x00_dev *rt2x00dev,
}
}
+static void rt2800_config_channel_rf55xx(struct rt2x00_dev *rt2x00dev,
+ struct ieee80211_conf *conf,
+ struct rf_channel *rf,
+ struct channel_info *info)
+{
+ u8 rfcsr, ep_reg;
+ int power_bound;
+
+ /* TODO */
+ const bool is_11b = false;
+ const bool is_type_ep = false;
+
+
+ /* Order of values on rf_channel entry: N, K, mod, R */
+ rt2800_rfcsr_write(rt2x00dev, 8, rf->rf1 & 0xff);
+
+ rt2800_rfcsr_read(rt2x00dev, 9, &rfcsr);
+ rt2x00_set_field8(&rfcsr, RFCSR9_K, rf->rf2 & 0xf);
+ rt2x00_set_field8(&rfcsr, RFCSR9_N, (rf->rf1 & 0x100) >> 8);
+ rt2x00_set_field8(&rfcsr, RFCSR9_MOD, ((rf->rf3 - 8) & 0x4) >> 2);
+ rt2800_rfcsr_write(rt2x00dev, 9, rfcsr);
+
+ rt2800_rfcsr_read(rt2x00dev, 11, &rfcsr);
+ rt2x00_set_field8(&rfcsr, RFCSR11_R, rf->rf4 - 1);
+ rt2x00_set_field8(&rfcsr, RFCSR11_MOD, (rf->rf3 - 8) & 0x3);
+ rt2800_rfcsr_write(rt2x00dev, 11, rfcsr);
+
+ if (rf->channel <= 14) {
+ rt2800_rfcsr_write(rt2x00dev, 10, 0x90);
+ /* FIXME: RF11 owerwrite ? */
+ rt2800_rfcsr_write(rt2x00dev, 11, 0x4A);
+ rt2800_rfcsr_write(rt2x00dev, 12, 0x52);
+ rt2800_rfcsr_write(rt2x00dev, 13, 0x42);
+ rt2800_rfcsr_write(rt2x00dev, 22, 0x40);
+ rt2800_rfcsr_write(rt2x00dev, 24, 0x4A);
+ rt2800_rfcsr_write(rt2x00dev, 25, 0x80);
+ rt2800_rfcsr_write(rt2x00dev, 27, 0x42);
+ rt2800_rfcsr_write(rt2x00dev, 36, 0x80);
+ rt2800_rfcsr_write(rt2x00dev, 37, 0x08);
+ rt2800_rfcsr_write(rt2x00dev, 38, 0x89);
+ rt2800_rfcsr_write(rt2x00dev, 39, 0x1B);
+ rt2800_rfcsr_write(rt2x00dev, 40, 0x0D);
+ rt2800_rfcsr_write(rt2x00dev, 41, 0x9B);
+ rt2800_rfcsr_write(rt2x00dev, 42, 0xD5);
+ rt2800_rfcsr_write(rt2x00dev, 43, 0x72);
+ rt2800_rfcsr_write(rt2x00dev, 44, 0x0E);
+ rt2800_rfcsr_write(rt2x00dev, 45, 0xA2);
+ rt2800_rfcsr_write(rt2x00dev, 46, 0x6B);
+ rt2800_rfcsr_write(rt2x00dev, 48, 0x10);
+ rt2800_rfcsr_write(rt2x00dev, 51, 0x3E);
+ rt2800_rfcsr_write(rt2x00dev, 52, 0x48);
+ rt2800_rfcsr_write(rt2x00dev, 54, 0x38);
+ rt2800_rfcsr_write(rt2x00dev, 56, 0xA1);
+ rt2800_rfcsr_write(rt2x00dev, 57, 0x00);
+ rt2800_rfcsr_write(rt2x00dev, 58, 0x39);
+ rt2800_rfcsr_write(rt2x00dev, 60, 0x45);
+ rt2800_rfcsr_write(rt2x00dev, 61, 0x91);
+ rt2800_rfcsr_write(rt2x00dev, 62, 0x39);
+
+ /* TODO RF27 <- tssi */
+
+ rfcsr = rf->channel <= 10 ? 0x07 : 0x06;
+ rt2800_rfcsr_write(rt2x00dev, 23, rfcsr);
+ rt2800_rfcsr_write(rt2x00dev, 59, rfcsr);
+
+ if (is_11b) {
+ /* CCK */
+ rt2800_rfcsr_write(rt2x00dev, 31, 0xF8);
+ rt2800_rfcsr_write(rt2x00dev, 32, 0xC0);
+ if (is_type_ep)
+ rt2800_rfcsr_write(rt2x00dev, 55, 0x06);
+ else
+ rt2800_rfcsr_write(rt2x00dev, 55, 0x47);
+ } else {
+ /* OFDM */
+ if (is_type_ep)
+ rt2800_rfcsr_write(rt2x00dev, 55, 0x03);
+ else
+ rt2800_rfcsr_write(rt2x00dev, 55, 0x43);
+ }
+
+ power_bound = POWER_BOUND;
+ ep_reg = 0x2;
+ } else {
+ rt2800_rfcsr_write(rt2x00dev, 10, 0x97);
+ /* FIMXE: RF11 overwrite */
+ rt2800_rfcsr_write(rt2x00dev, 11, 0x40);
+ rt2800_rfcsr_write(rt2x00dev, 25, 0xBF);
+ rt2800_rfcsr_write(rt2x00dev, 27, 0x42);
+ rt2800_rfcsr_write(rt2x00dev, 36, 0x00);
+ rt2800_rfcsr_write(rt2x00dev, 37, 0x04);
+ rt2800_rfcsr_write(rt2x00dev, 38, 0x85);
+ rt2800_rfcsr_write(rt2x00dev, 40, 0x42);
+ rt2800_rfcsr_write(rt2x00dev, 41, 0xBB);
+ rt2800_rfcsr_write(rt2x00dev, 42, 0xD7);
+ rt2800_rfcsr_write(rt2x00dev, 45, 0x41);
+ rt2800_rfcsr_write(rt2x00dev, 48, 0x00);
+ rt2800_rfcsr_write(rt2x00dev, 57, 0x77);
+ rt2800_rfcsr_write(rt2x00dev, 60, 0x05);
+ rt2800_rfcsr_write(rt2x00dev, 61, 0x01);
+
+ /* TODO RF27 <- tssi */
+
+ if (rf->channel >= 36 && rf->channel <= 64) {
+
+ rt2800_rfcsr_write(rt2x00dev, 12, 0x2E);
+ rt2800_rfcsr_write(rt2x00dev, 13, 0x22);
+ rt2800_rfcsr_write(rt2x00dev, 22, 0x60);
+ rt2800_rfcsr_write(rt2x00dev, 23, 0x7F);
+ if (rf->channel <= 50)
+ rt2800_rfcsr_write(rt2x00dev, 24, 0x09);
+ else if (rf->channel >= 52)
+ rt2800_rfcsr_write(rt2x00dev, 24, 0x07);
+ rt2800_rfcsr_write(rt2x00dev, 39, 0x1C);
+ rt2800_rfcsr_write(rt2x00dev, 43, 0x5B);
+ rt2800_rfcsr_write(rt2x00dev, 44, 0X40);
+ rt2800_rfcsr_write(rt2x00dev, 46, 0X00);
+ rt2800_rfcsr_write(rt2x00dev, 51, 0xFE);
+ rt2800_rfcsr_write(rt2x00dev, 52, 0x0C);
+ rt2800_rfcsr_write(rt2x00dev, 54, 0xF8);
+ if (rf->channel <= 50) {
+ rt2800_rfcsr_write(rt2x00dev, 55, 0x06),
+ rt2800_rfcsr_write(rt2x00dev, 56, 0xD3);
+ } else if (rf->channel >= 52) {
+ rt2800_rfcsr_write(rt2x00dev, 55, 0x04);
+ rt2800_rfcsr_write(rt2x00dev, 56, 0xBB);
+ }
+
+ rt2800_rfcsr_write(rt2x00dev, 58, 0x15);
+ rt2800_rfcsr_write(rt2x00dev, 59, 0x7F);
+ rt2800_rfcsr_write(rt2x00dev, 62, 0x15);
+
+ } else if (rf->channel >= 100 && rf->channel <= 165) {
+
+ rt2800_rfcsr_write(rt2x00dev, 12, 0x0E);
+ rt2800_rfcsr_write(rt2x00dev, 13, 0x42);
+ rt2800_rfcsr_write(rt2x00dev, 22, 0x40);
+ if (rf->channel <= 153) {
+ rt2800_rfcsr_write(rt2x00dev, 23, 0x3C);
+ rt2800_rfcsr_write(rt2x00dev, 24, 0x06);
+ } else if (rf->channel >= 155) {
+ rt2800_rfcsr_write(rt2x00dev, 23, 0x38);
+ rt2800_rfcsr_write(rt2x00dev, 24, 0x05);
+ }
+ if (rf->channel <= 138) {
+ rt2800_rfcsr_write(rt2x00dev, 39, 0x1A);
+ rt2800_rfcsr_write(rt2x00dev, 43, 0x3B);
+ rt2800_rfcsr_write(rt2x00dev, 44, 0x20);
+ rt2800_rfcsr_write(rt2x00dev, 46, 0x18);
+ } else if (rf->channel >= 140) {
+ rt2800_rfcsr_write(rt2x00dev, 39, 0x18);
+ rt2800_rfcsr_write(rt2x00dev, 43, 0x1B);
+ rt2800_rfcsr_write(rt2x00dev, 44, 0x10);
+ rt2800_rfcsr_write(rt2x00dev, 46, 0X08);
+ }
+ if (rf->channel <= 124)
+ rt2800_rfcsr_write(rt2x00dev, 51, 0xFC);
+ else if (rf->channel >= 126)
+ rt2800_rfcsr_write(rt2x00dev, 51, 0xEC);
+ if (rf->channel <= 138)
+ rt2800_rfcsr_write(rt2x00dev, 52, 0x06);
+ else if (rf->channel >= 140)
+ rt2800_rfcsr_write(rt2x00dev, 52, 0x06);
+ rt2800_rfcsr_write(rt2x00dev, 54, 0xEB);
+ if (rf->channel <= 138)
+ rt2800_rfcsr_write(rt2x00dev, 55, 0x01);
+ else if (rf->channel >= 140)
+ rt2800_rfcsr_write(rt2x00dev, 55, 0x00);
+ if (rf->channel <= 128)
+ rt2800_rfcsr_write(rt2x00dev, 56, 0xBB);
+ else if (rf->channel >= 130)
+ rt2800_rfcsr_write(rt2x00dev, 56, 0xAB);
+ if (rf->channel <= 116)
+ rt2800_rfcsr_write(rt2x00dev, 58, 0x1D);
+ else if (rf->channel >= 118)
+ rt2800_rfcsr_write(rt2x00dev, 58, 0x15);
+ if (rf->channel <= 138)
+ rt2800_rfcsr_write(rt2x00dev, 59, 0x3F);
+ else if (rf->channel >= 140)
+ rt2800_rfcsr_write(rt2x00dev, 59, 0x7C);
+ if (rf->channel <= 116)
+ rt2800_rfcsr_write(rt2x00dev, 62, 0x1D);
+ else if (rf->channel >= 118)
+ rt2800_rfcsr_write(rt2x00dev, 62, 0x15);
+ }
+
+ power_bound = POWER_BOUND_5G;
+ ep_reg = 0x3;
+ }
+
+ rt2800_rfcsr_read(rt2x00dev, 49, &rfcsr);
+ if (info->default_power1 > power_bound)
+ rt2x00_set_field8(&rfcsr, RFCSR49_TX, power_bound);
+ else
+ rt2x00_set_field8(&rfcsr, RFCSR49_TX, info->default_power1);
+ if (is_type_ep)
+ rt2x00_set_field8(&rfcsr, RFCSR49_EP, ep_reg);
+ rt2800_rfcsr_write(rt2x00dev, 49, rfcsr);
+
+ rt2800_rfcsr_read(rt2x00dev, 50, &rfcsr);
+ if (info->default_power1 > power_bound)
+ rt2x00_set_field8(&rfcsr, RFCSR50_TX, power_bound);
+ else
+ rt2x00_set_field8(&rfcsr, RFCSR50_TX, info->default_power2);
+ if (is_type_ep)
+ rt2x00_set_field8(&rfcsr, RFCSR50_EP, ep_reg);
+ rt2800_rfcsr_write(rt2x00dev, 50, rfcsr);
+
+ rt2800_rfcsr_read(rt2x00dev, 1, &rfcsr);
+ rt2x00_set_field8(&rfcsr, RFCSR1_RF_BLOCK_EN, 1);
+ rt2x00_set_field8(&rfcsr, RFCSR1_PLL_PD, 1);
+
+ rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD,
+ rt2x00dev->default_ant.tx_chain_num >= 1);
+ rt2x00_set_field8(&rfcsr, RFCSR1_TX1_PD,
+ rt2x00dev->default_ant.tx_chain_num == 2);
+ rt2x00_set_field8(&rfcsr, RFCSR1_TX2_PD, 0);
+
+ rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD,
+ rt2x00dev->default_ant.rx_chain_num >= 1);
+ rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD,
+ rt2x00dev->default_ant.rx_chain_num == 2);
+ rt2x00_set_field8(&rfcsr, RFCSR1_RX2_PD, 0);
+
+ rt2800_rfcsr_write(rt2x00dev, 1, rfcsr);
+ rt2800_rfcsr_write(rt2x00dev, 6, 0xe4);
+
+ if (conf_is_ht40(conf))
+ rt2800_rfcsr_write(rt2x00dev, 30, 0x16);
+ else
+ rt2800_rfcsr_write(rt2x00dev, 30, 0x10);
+
+ if (!is_11b) {
+ rt2800_rfcsr_write(rt2x00dev, 31, 0x80);
+ rt2800_rfcsr_write(rt2x00dev, 32, 0x80);
+ }
+
+ /* TODO proper frequency adjustment */
+ rt2800_rfcsr_read(rt2x00dev, 17, &rfcsr);
+ if (rt2x00dev->freq_offset > FREQ_OFFSET_BOUND)
+ rt2x00_set_field8(&rfcsr, RFCSR17_CODE, FREQ_OFFSET_BOUND);
+ else
+ rt2x00_set_field8(&rfcsr, RFCSR17_CODE, rt2x00dev->freq_offset);
+ rt2800_rfcsr_write(rt2x00dev, 17, rfcsr);
+
+ /* TODO merge with others */
+ rt2800_rfcsr_read(rt2x00dev, 3, &rfcsr);
+ rt2x00_set_field8(&rfcsr, RFCSR3_VCOCAL_EN, 1);
+ rt2800_rfcsr_write(rt2x00dev, 3, rfcsr);
+}
+
static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
struct ieee80211_conf *conf,
struct rf_channel *rf,
@@ -2225,6 +2477,9 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
case RF5392:
rt2800_config_channel_rf53xx(rt2x00dev, conf, rf, info);
break;
+ case RF5592:
+ rt2800_config_channel_rf55xx(rt2x00dev, conf, rf, info);
+ break;
default:
rt2800_config_channel_rf2xxx(rt2x00dev, conf, rf, info);
}
--
1.7.4.4
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 05/25] rt2800: 5592: MAC registers initalization
2013-03-16 18:19 [PATCH 0/25] rt2800: add experimental support for 5592 chip stf_xl
` (3 preceding siblings ...)
2013-03-16 18:19 ` [PATCH 04/25] rt2800: 5592: channel config stub stf_xl
@ 2013-03-16 18:19 ` stf_xl
2013-03-16 18:19 ` [PATCH 06/25] rt2800: 5592: BBP registers initialization stf_xl
` (20 subsequent siblings)
25 siblings, 0 replies; 27+ messages in thread
From: stf_xl @ 2013-03-16 18:19 UTC (permalink / raw)
To: John W. Linville"; +Cc: linux-wireless, users, Stanislaw Gruszka
From: Stanislaw Gruszka <stf_xl@wp.pl>
Based on:
NICInitRT5592MacRegisters()
from:
DPO_RT5572_LinuxSTA_2.6.1.3_20121022/chips/rt5592.c
On vendor driver we do not initialize TX_SW_CFG{1,2}. However the same
difference is between rt2x00 and vendor driver for 5390 chip.
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
---
drivers/net/wireless/rt2x00/rt2800lib.c | 6 ++++--
1 files changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 079086b..a35bce4 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -3377,7 +3377,8 @@ static int rt2800_init_registers(struct rt2x00_dev *rt2x00dev)
rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000400);
rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606);
} else if (rt2x00_rt(rt2x00dev, RT5390) ||
- rt2x00_rt(rt2x00dev, RT5392)) {
+ rt2x00_rt(rt2x00dev, RT5392) ||
+ rt2x00_rt(rt2x00dev, RT5592)) {
rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000404);
rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606);
rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000);
@@ -3557,7 +3558,8 @@ static int rt2800_init_registers(struct rt2x00_dev *rt2x00dev)
rt2x00_set_field32(®, TXOP_CTRL_CFG_EXT_CWMIN, 0);
rt2800_register_write(rt2x00dev, TXOP_CTRL_CFG, reg);
- rt2800_register_write(rt2x00dev, TXOP_HLDR_ET, 0x00000002);
+ reg = rt2x00_rt(rt2x00dev, RT5592) ? 0x00000082 : 0x00000002;
+ rt2800_register_write(rt2x00dev, TXOP_HLDR_ET, reg);
rt2800_register_read(rt2x00dev, TX_RTS_CFG, ®);
rt2x00_set_field32(®, TX_RTS_CFG_AUTO_RTS_RETRY_LIMIT, 32);
--
1.7.4.4
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 06/25] rt2800: 5592: BBP registers initialization
2013-03-16 18:19 [PATCH 0/25] rt2800: add experimental support for 5592 chip stf_xl
` (4 preceding siblings ...)
2013-03-16 18:19 ` [PATCH 05/25] rt2800: 5592: MAC registers initalization stf_xl
@ 2013-03-16 18:19 ` stf_xl
2013-03-16 18:19 ` [PATCH 07/25] rt2800: 5592: common BBP initialization stf_xl
` (19 subsequent siblings)
25 siblings, 0 replies; 27+ messages in thread
From: stf_xl @ 2013-03-16 18:19 UTC (permalink / raw)
To: John W. Linville"; +Cc: linux-wireless, users, Stanislaw Gruszka
From: Stanislaw Gruszka <stf_xl@wp.pl>
Based on:
NICInitRT5592BbpRegisters()
NICInitBBP()
from:
DPO_RT5572_LinuxSTA_2.6.1.3_20121022/chips/rt5592.c
DPO_RT5572_LinuxSTA_2.6.1.3_20121022/common/rtmp_init.c
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
---
drivers/net/wireless/rt2x00/rt2800.h | 24 ++++++-
drivers/net/wireless/rt2x00/rt2800lib.c | 110 +++++++++++++++++++++++++++++--
2 files changed, 125 insertions(+), 9 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h
index acb5e62..9d18d53 100644
--- a/drivers/net/wireless/rt2x00/rt2800.h
+++ b/drivers/net/wireless/rt2x00/rt2800.h
@@ -90,11 +90,8 @@
#define REV_RT3390E 0x0211
#define REV_RT5390F 0x0502
#define REV_RT5390R 0x1502
+#define REV_RT5592C 0x0221
-/*
- * Signal information.
- * Default offset is required for RSSI <-> dBm conversion.
- */
#define DEFAULT_RSSI_OFFSET 120
/*
@@ -1956,6 +1953,20 @@ struct mac_iveiv_entry {
#define BBP49_UPDATE_FLAG FIELD8(0x01)
/*
+ * BBP 105:
+ * - bit0: detect SIG on primary channel only (on 40MHz bandwidth)
+ * - bit1: FEQ (Feed Forward Compensation) for independend streams
+ * - bit2: MLD (Maximum Likehood Detection) for 2 streams (reserved on single
+ * stream)
+ * - bit4: channel estimation updates based on remodulation of
+ * L-SIG and HT-SIG symbols
+ */
+#define BBP105_DETECT_SIG_ON_PRIMARY FIELD8(0x01)
+#define BBP105_FEQ FIELD8(0x02)
+#define BBP105_MLD FIELD8(0x04)
+#define BBP105_SIG_REMODULATION FIELD8(0x08)
+
+/*
* BBP 109
*/
#define BBP109_TX0_POWER FIELD8(0x0f)
@@ -1975,6 +1986,11 @@ struct mac_iveiv_entry {
#define BBP152_RX_DEFAULT_ANT FIELD8(0x80)
/*
+ * BBP 254: unknown
+ */
+#define BBP254_BIT7 FIELD8(0x80)
+
+/*
* RFCSR registers
* The wordsize of the RFCSR is 8 bits.
*/
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index a35bce4..16e4200 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -3744,6 +3744,104 @@ static int rt2800_wait_bbp_ready(struct rt2x00_dev *rt2x00dev)
return -EACCES;
}
+static void rt2800_bbp4_mac_if_ctrl(struct rt2x00_dev *rt2x00dev)
+{
+ u8 value;
+
+ rt2800_bbp_read(rt2x00dev, 4, &value);
+ rt2x00_set_field8(&value, BBP4_MAC_IF_CTRL, 1);
+ rt2800_bbp_write(rt2x00dev, 4, value);
+}
+
+static void rt2800_init_bbp_5592_glrt(struct rt2x00_dev *rt2x00dev)
+{
+ const u8 glrt_table[] = {
+ 0xE0, 0x1F, 0X38, 0x32, 0x08, 0x28, 0x19, 0x0A, 0xFF, 0x00, /* 128 ~ 137 */
+ 0x16, 0x10, 0x10, 0x0B, 0x36, 0x2C, 0x26, 0x24, 0x42, 0x36, /* 138 ~ 147 */
+ 0x30, 0x2D, 0x4C, 0x46, 0x3D, 0x40, 0x3E, 0x42, 0x3D, 0x40, /* 148 ~ 157 */
+ 0X3C, 0x34, 0x2C, 0x2F, 0x3C, 0x35, 0x2E, 0x2A, 0x49, 0x41, /* 158 ~ 167 */
+ 0x36, 0x31, 0x30, 0x30, 0x0E, 0x0D, 0x28, 0x21, 0x1C, 0x16, /* 168 ~ 177 */
+ 0x50, 0x4A, 0x43, 0x40, 0x10, 0x10, 0x10, 0x10, 0x00, 0x00, /* 178 ~ 187 */
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 188 ~ 197 */
+ 0x00, 0x00, 0x7D, 0x14, 0x32, 0x2C, 0x36, 0x4C, 0x43, 0x2C, /* 198 ~ 207 */
+ 0x2E, 0x36, 0x30, 0x6E, /* 208 ~ 211 */
+ };
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(glrt_table); i++) {
+ rt2800_bbp_write(rt2x00dev, 195, 128 + i);
+ rt2800_bbp_write(rt2x00dev, 196, glrt_table[i]);
+ }
+};
+
+static void rt2800_init_bbp_5592(struct rt2x00_dev *rt2x00dev)
+{
+ int ant, div_mode;
+ u16 eeprom;
+ u8 value;
+
+ rt2800_bbp_read(rt2x00dev, 105, &value);
+ rt2x00_set_field8(&value, BBP105_MLD,
+ rt2x00dev->default_ant.rx_chain_num == 2);
+ rt2800_bbp_write(rt2x00dev, 105, value);
+
+ rt2800_bbp4_mac_if_ctrl(rt2x00dev);
+
+ rt2800_bbp_write(rt2x00dev, 20, 0x06);
+ rt2800_bbp_write(rt2x00dev, 31, 0x08);
+ rt2800_bbp_write(rt2x00dev, 65, 0x2C);
+ rt2800_bbp_write(rt2x00dev, 68, 0xDD);
+ rt2800_bbp_write(rt2x00dev, 69, 0x1A);
+ rt2800_bbp_write(rt2x00dev, 70, 0x05);
+ rt2800_bbp_write(rt2x00dev, 73, 0x13);
+ rt2800_bbp_write(rt2x00dev, 74, 0x0F);
+ rt2800_bbp_write(rt2x00dev, 75, 0x4F);
+ rt2800_bbp_write(rt2x00dev, 76, 0x28);
+ rt2800_bbp_write(rt2x00dev, 77, 0x59);
+ rt2800_bbp_write(rt2x00dev, 84, 0x9A);
+ rt2800_bbp_write(rt2x00dev, 86, 0x38);
+ rt2800_bbp_write(rt2x00dev, 88, 0x90);
+ rt2800_bbp_write(rt2x00dev, 91, 0x04);
+ rt2800_bbp_write(rt2x00dev, 92, 0x02);
+ rt2800_bbp_write(rt2x00dev, 95, 0x9a);
+ rt2800_bbp_write(rt2x00dev, 98, 0x12);
+ rt2800_bbp_write(rt2x00dev, 103, 0xC0);
+ rt2800_bbp_write(rt2x00dev, 104, 0x92);
+ /* FIXME BBP105 owerwrite */
+ rt2800_bbp_write(rt2x00dev, 105, 0x3C);
+ rt2800_bbp_write(rt2x00dev, 106, 0x35);
+ rt2800_bbp_write(rt2x00dev, 128, 0x12);
+ rt2800_bbp_write(rt2x00dev, 134, 0xD0);
+ rt2800_bbp_write(rt2x00dev, 135, 0xF6);
+ rt2800_bbp_write(rt2x00dev, 137, 0x0F);
+
+ /* Initialize GLRT (Generalized Likehood Radio Test) */
+ rt2800_init_bbp_5592_glrt(rt2x00dev);
+
+ rt2800_bbp4_mac_if_ctrl(rt2x00dev);
+
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1, &eeprom);
+ div_mode = rt2x00_get_field16(eeprom, EEPROM_NIC_CONF1_ANT_DIVERSITY);
+ ant = (div_mode == 3) ? 1 : 0;
+ rt2800_bbp_read(rt2x00dev, 152, &value);
+ if (ant == 0) {
+ /* Main antenna */
+ rt2x00_set_field8(&value, BBP152_RX_DEFAULT_ANT, 1);
+ } else {
+ /* Auxiliary antenna */
+ rt2x00_set_field8(&value, BBP152_RX_DEFAULT_ANT, 0);
+ }
+ rt2800_bbp_write(rt2x00dev, 152, value);
+
+ if (rt2x00_rt_rev_gte(rt2x00dev, RT5592, REV_RT5592C)) {
+ rt2800_bbp_read(rt2x00dev, 254, &value);
+ rt2x00_set_field8(&value, BBP254_BIT7, 1);
+ rt2800_bbp_write(rt2x00dev, 254, value);
+ }
+
+ rt2800_bbp_write(rt2x00dev, 84, 0x19);
+}
+
static int rt2800_init_bbp(struct rt2x00_dev *rt2x00dev)
{
unsigned int i;
@@ -3755,6 +3853,11 @@ static int rt2800_init_bbp(struct rt2x00_dev *rt2x00dev)
rt2800_wait_bbp_ready(rt2x00dev)))
return -EACCES;
+ if (rt2x00_rt(rt2x00dev, RT5592)) {
+ rt2800_init_bbp_5592(rt2x00dev);
+ return 0;
+ }
+
if (rt2x00_rt(rt2x00dev, RT3352)) {
rt2800_bbp_write(rt2x00dev, 3, 0x00);
rt2800_bbp_write(rt2x00dev, 4, 0x50);
@@ -3762,11 +3865,8 @@ static int rt2800_init_bbp(struct rt2x00_dev *rt2x00dev)
if (rt2x00_rt(rt2x00dev, RT3290) ||
rt2x00_rt(rt2x00dev, RT5390) ||
- rt2x00_rt(rt2x00dev, RT5392)) {
- rt2800_bbp_read(rt2x00dev, 4, &value);
- rt2x00_set_field8(&value, BBP4_MAC_IF_CTRL, 1);
- rt2800_bbp_write(rt2x00dev, 4, value);
- }
+ rt2x00_rt(rt2x00dev, RT5392))
+ rt2800_bbp4_mac_if_ctrl(rt2x00dev);
if (rt2800_is_305x_soc(rt2x00dev) ||
rt2x00_rt(rt2x00dev, RT3290) ||
--
1.7.4.4
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 07/25] rt2800: 5592: common BBP initialization
2013-03-16 18:19 [PATCH 0/25] rt2800: add experimental support for 5592 chip stf_xl
` (5 preceding siblings ...)
2013-03-16 18:19 ` [PATCH 06/25] rt2800: 5592: BBP registers initialization stf_xl
@ 2013-03-16 18:19 ` stf_xl
2013-03-16 18:19 ` [PATCH 08/25] rt2800: 5592: RF early registers initialization stf_xl
` (18 subsequent siblings)
25 siblings, 0 replies; 27+ messages in thread
From: stf_xl @ 2013-03-16 18:19 UTC (permalink / raw)
To: John W. Linville"; +Cc: linux-wireless, users, Stanislaw Gruszka
From: Stanislaw Gruszka <stf_xl@wp.pl>
Add BBP registers initialization common with other chipsets, but for now
performed only for 5592.
Based on:
NICInitBBP()
from:
DPO_RT5572_LinuxSTA_2.6.1.3_20121022/common/rtmp_init.c
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
---
drivers/net/wireless/rt2x00/rt2800lib.c | 22 ++++++++++++++++++++++
1 files changed, 22 insertions(+), 0 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 16e4200..9ac6f20 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -3774,12 +3774,34 @@ static void rt2800_init_bbp_5592_glrt(struct rt2x00_dev *rt2x00dev)
}
};
+static void rt2800_init_bbb_early(struct rt2x00_dev *rt2x00dev)
+{
+ rt2800_bbp_write(rt2x00dev, 65, 0x2C);
+ rt2800_bbp_write(rt2x00dev, 66, 0x38);
+ rt2800_bbp_write(rt2x00dev, 68, 0x0B);
+ rt2800_bbp_write(rt2x00dev, 69, 0x12);
+ rt2800_bbp_write(rt2x00dev, 70, 0x0a);
+ rt2800_bbp_write(rt2x00dev, 73, 0x10);
+ rt2800_bbp_write(rt2x00dev, 81, 0x37);
+ rt2800_bbp_write(rt2x00dev, 82, 0x62);
+ rt2800_bbp_write(rt2x00dev, 83, 0x6A);
+ rt2800_bbp_write(rt2x00dev, 84, 0x99);
+ rt2800_bbp_write(rt2x00dev, 86, 0x00);
+ rt2800_bbp_write(rt2x00dev, 91, 0x04);
+ rt2800_bbp_write(rt2x00dev, 92, 0x00);
+ rt2800_bbp_write(rt2x00dev, 103, 0x00);
+ rt2800_bbp_write(rt2x00dev, 105, 0x05);
+ rt2800_bbp_write(rt2x00dev, 106, 0x35);
+}
+
static void rt2800_init_bbp_5592(struct rt2x00_dev *rt2x00dev)
{
int ant, div_mode;
u16 eeprom;
u8 value;
+ rt2800_init_bbb_early(rt2x00dev);
+
rt2800_bbp_read(rt2x00dev, 105, &value);
rt2x00_set_field8(&value, BBP105_MLD,
rt2x00dev->default_ant.rx_chain_num == 2);
--
1.7.4.4
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 08/25] rt2800: 5592: RF early registers initialization
2013-03-16 18:19 [PATCH 0/25] rt2800: add experimental support for 5592 chip stf_xl
` (6 preceding siblings ...)
2013-03-16 18:19 ` [PATCH 07/25] rt2800: 5592: common BBP initialization stf_xl
@ 2013-03-16 18:19 ` stf_xl
2013-03-16 18:19 ` [PATCH 09/25] rt2800: 5592: initalize RF_R27 on older revisions stf_xl
` (17 subsequent siblings)
25 siblings, 0 replies; 27+ messages in thread
From: stf_xl @ 2013-03-16 18:19 UTC (permalink / raw)
To: John W. Linville"; +Cc: linux-wireless, users, Stanislaw Gruszka
From: Stanislaw Gruszka <stf_xl@wp.pl>
Based on:
NICInitRT5592RFRegisters()
RF5592Reg_2G_5G[]
from:
DPO_RT5572_LinuxSTA_2.6.1.3_20121022/chips/rt5592.c
This patch also merge common frequency adjustment (RF_R17 settings)
code. Further work is needed, to setup more RF/BBP/MAC registers after
that.
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
---
drivers/net/wireless/rt2x00/rt2800lib.c | 76 +++++++++++++++++++++----------
1 files changed, 51 insertions(+), 25 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 9ac6f20..57afd6b 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -1991,6 +1991,18 @@ static void rt2800_config_channel_rf3052(struct rt2x00_dev *rt2x00dev,
#define POWER_BOUND_5G 0x2b
#define FREQ_OFFSET_BOUND 0x5f
+static void rt2800_adjust_freq_offset(struct rt2x00_dev *rt2x00dev)
+{
+ u8 rfcsr;
+
+ rt2800_rfcsr_read(rt2x00dev, 17, &rfcsr);
+ if (rt2x00dev->freq_offset > FREQ_OFFSET_BOUND)
+ rt2x00_set_field8(&rfcsr, RFCSR17_CODE, FREQ_OFFSET_BOUND);
+ else
+ rt2x00_set_field8(&rfcsr, RFCSR17_CODE, rt2x00dev->freq_offset);
+ rt2800_rfcsr_write(rt2x00dev, 17, rfcsr);
+}
+
static void rt2800_config_channel_rf3290(struct rt2x00_dev *rt2x00dev,
struct ieee80211_conf *conf,
struct rf_channel *rf,
@@ -2011,12 +2023,7 @@ static void rt2800_config_channel_rf3290(struct rt2x00_dev *rt2x00dev,
rt2x00_set_field8(&rfcsr, RFCSR49_TX, info->default_power1);
rt2800_rfcsr_write(rt2x00dev, 49, rfcsr);
- rt2800_rfcsr_read(rt2x00dev, 17, &rfcsr);
- if (rt2x00dev->freq_offset > FREQ_OFFSET_BOUND)
- rt2x00_set_field8(&rfcsr, RFCSR17_CODE, FREQ_OFFSET_BOUND);
- else
- rt2x00_set_field8(&rfcsr, RFCSR17_CODE, rt2x00dev->freq_offset);
- rt2800_rfcsr_write(rt2x00dev, 17, rfcsr);
+ rt2800_adjust_freq_offset(rt2x00dev);
if (rf->channel <= 14) {
if (rf->channel == 6)
@@ -2057,13 +2064,7 @@ static void rt2800_config_channel_rf3322(struct rt2x00_dev *rt2x00dev,
else
rt2800_rfcsr_write(rt2x00dev, 48, info->default_power2);
- rt2800_rfcsr_read(rt2x00dev, 17, &rfcsr);
- if (rt2x00dev->freq_offset > FREQ_OFFSET_BOUND)
- rt2x00_set_field8(&rfcsr, RFCSR17_CODE, FREQ_OFFSET_BOUND);
- else
- rt2x00_set_field8(&rfcsr, RFCSR17_CODE, rt2x00dev->freq_offset);
-
- rt2800_rfcsr_write(rt2x00dev, 17, rfcsr);
+ rt2800_adjust_freq_offset(rt2x00dev);
rt2800_rfcsr_read(rt2x00dev, 1, &rfcsr);
rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 1);
@@ -2128,12 +2129,7 @@ static void rt2800_config_channel_rf53xx(struct rt2x00_dev *rt2x00dev,
rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, 1);
rt2800_rfcsr_write(rt2x00dev, 1, rfcsr);
- rt2800_rfcsr_read(rt2x00dev, 17, &rfcsr);
- if (rt2x00dev->freq_offset > FREQ_OFFSET_BOUND)
- rt2x00_set_field8(&rfcsr, RFCSR17_CODE, FREQ_OFFSET_BOUND);
- else
- rt2x00_set_field8(&rfcsr, RFCSR17_CODE, rt2x00dev->freq_offset);
- rt2800_rfcsr_write(rt2x00dev, 17, rfcsr);
+ rt2800_adjust_freq_offset(rt2x00dev);
if (rf->channel <= 14) {
int idx = rf->channel-1;
@@ -2423,12 +2419,7 @@ static void rt2800_config_channel_rf55xx(struct rt2x00_dev *rt2x00dev,
}
/* TODO proper frequency adjustment */
- rt2800_rfcsr_read(rt2x00dev, 17, &rfcsr);
- if (rt2x00dev->freq_offset > FREQ_OFFSET_BOUND)
- rt2x00_set_field8(&rfcsr, RFCSR17_CODE, FREQ_OFFSET_BOUND);
- else
- rt2x00_set_field8(&rfcsr, RFCSR17_CODE, rt2x00dev->freq_offset);
- rt2800_rfcsr_write(rt2x00dev, 17, rfcsr);
+ rt2800_adjust_freq_offset(rt2x00dev);
/* TODO merge with others */
rt2800_rfcsr_read(rt2x00dev, 3, &rfcsr);
@@ -4638,6 +4629,37 @@ static void rt2800_init_rfcsr_5392(struct rt2x00_dev *rt2x00dev)
rt2800_rfcsr_write(rt2x00dev, 63, 0x07);
}
+static void rt2800_init_rfcsr_5592(struct rt2x00_dev *rt2x00dev)
+{
+ rt2800_rfcsr_write(rt2x00dev, 1, 0x3F);
+ rt2800_rfcsr_write(rt2x00dev, 3, 0x08);
+ rt2800_rfcsr_write(rt2x00dev, 3, 0x08);
+ rt2800_rfcsr_write(rt2x00dev, 5, 0x10);
+ rt2800_rfcsr_write(rt2x00dev, 6, 0xE4);
+ rt2800_rfcsr_write(rt2x00dev, 7, 0x00);
+ rt2800_rfcsr_write(rt2x00dev, 14, 0x00);
+ rt2800_rfcsr_write(rt2x00dev, 15, 0x00);
+ rt2800_rfcsr_write(rt2x00dev, 16, 0x00);
+ rt2800_rfcsr_write(rt2x00dev, 18, 0x03);
+ rt2800_rfcsr_write(rt2x00dev, 19, 0x4D);
+ rt2800_rfcsr_write(rt2x00dev, 20, 0x10);
+ rt2800_rfcsr_write(rt2x00dev, 21, 0x8D);
+ rt2800_rfcsr_write(rt2x00dev, 26, 0x82);
+ rt2800_rfcsr_write(rt2x00dev, 28, 0x00);
+ rt2800_rfcsr_write(rt2x00dev, 29, 0x10);
+ rt2800_rfcsr_write(rt2x00dev, 33, 0xC0);
+ rt2800_rfcsr_write(rt2x00dev, 34, 0x07);
+ rt2800_rfcsr_write(rt2x00dev, 35, 0x12);
+ rt2800_rfcsr_write(rt2x00dev, 47, 0x0C);
+ rt2800_rfcsr_write(rt2x00dev, 53, 0x22);
+ rt2800_rfcsr_write(rt2x00dev, 63, 0x07);
+
+ rt2800_rfcsr_write(rt2x00dev, 2, 0x80);
+ msleep(1);
+
+ rt2800_adjust_freq_offset(rt2x00dev);
+}
+
static int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
{
struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
@@ -4655,6 +4677,7 @@ static int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
!rt2x00_rt(rt2x00dev, RT3572) &&
!rt2x00_rt(rt2x00dev, RT5390) &&
!rt2x00_rt(rt2x00dev, RT5392) &&
+ !rt2x00_rt(rt2x00dev, RT5392) &&
!rt2800_is_305x_soc(rt2x00dev))
return 0;
@@ -4709,6 +4732,9 @@ static int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
case RT5392:
rt2800_init_rfcsr_5392(rt2x00dev);
break;
+ case RT5592:
+ rt2800_init_rfcsr_5592(rt2x00dev);
+ break;
}
if (rt2x00_rt_rev_lt(rt2x00dev, RT3070, REV_RT3070F)) {
--
1.7.4.4
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 09/25] rt2800: 5592: initalize RF_R27 on older revisions
2013-03-16 18:19 [PATCH 0/25] rt2800: add experimental support for 5592 chip stf_xl
` (7 preceding siblings ...)
2013-03-16 18:19 ` [PATCH 08/25] rt2800: 5592: RF early registers initialization stf_xl
@ 2013-03-16 18:19 ` stf_xl
2013-03-16 18:19 ` [PATCH 10/25] rt2800: 5592: initalize BBP_R103 register on new revisions stf_xl
` (16 subsequent siblings)
25 siblings, 0 replies; 27+ messages in thread
From: stf_xl @ 2013-03-16 18:19 UTC (permalink / raw)
To: John W. Linville"; +Cc: linux-wireless, users, Stanislaw Gruszka
From: Stanislaw Gruszka <stf_xl@wp.pl>
Based on:
NICInitRT5592RFRegisters()
from:
DPO_RT5572_LinuxSTA_2.6.1.3_20121022/chips/rt5592.c
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
---
drivers/net/wireless/rt2x00/rt2800lib.c | 3 ++-
1 files changed, 2 insertions(+), 1 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 57afd6b..e6d2b14a 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -4832,7 +4832,8 @@ static int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
if (rt2x00_rt_rev_lt(rt2x00dev, RT3070, REV_RT3070F) ||
rt2x00_rt_rev_lt(rt2x00dev, RT3071, REV_RT3071E) ||
rt2x00_rt_rev_lt(rt2x00dev, RT3090, REV_RT3090E) ||
- rt2x00_rt_rev_lt(rt2x00dev, RT3390, REV_RT3390E))
+ rt2x00_rt_rev_lt(rt2x00dev, RT3390, REV_RT3390E) ||
+ rt2x00_rt_rev_lt(rt2x00dev, RT5592, REV_RT5592C))
rt2800_rfcsr_write(rt2x00dev, 27, 0x03);
rt2800_register_read(rt2x00dev, OPT_14_CSR, ®);
--
1.7.4.4
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 10/25] rt2800: 5592: initalize BBP_R103 register on new revisions
2013-03-16 18:19 [PATCH 0/25] rt2800: add experimental support for 5592 chip stf_xl
` (8 preceding siblings ...)
2013-03-16 18:19 ` [PATCH 09/25] rt2800: 5592: initalize RF_R27 on older revisions stf_xl
@ 2013-03-16 18:19 ` stf_xl
2013-03-16 18:19 ` [PATCH 11/25] rt2800: 5592: initialize BBP_R138 register stf_xl
` (15 subsequent siblings)
25 siblings, 0 replies; 27+ messages in thread
From: stf_xl @ 2013-03-16 18:19 UTC (permalink / raw)
To: John W. Linville"; +Cc: linux-wireless, users, Stanislaw Gruszka
From: Stanislaw Gruszka <stf_xl@wp.pl>
Based on:
NICInitRT5592RFRegisters()
from:
DPO_RT5572_LinuxSTA_2.6.1.3_20121022/chips/rt5592.c
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
---
drivers/net/wireless/rt2x00/rt2800lib.c | 2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index e6d2b14a..554bd9b 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -3853,6 +3853,8 @@ static void rt2800_init_bbp_5592(struct rt2x00_dev *rt2x00dev)
}
rt2800_bbp_write(rt2x00dev, 84, 0x19);
+ if (rt2x00_rt_rev_gte(rt2x00dev, RT5592, REV_RT5592C))
+ rt2800_bbp_write(rt2x00dev, 103, 0xc0);
}
static int rt2800_init_bbp(struct rt2x00_dev *rt2x00dev)
--
1.7.4.4
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 11/25] rt2800: 5592: initialize BBP_R138 register
2013-03-16 18:19 [PATCH 0/25] rt2800: add experimental support for 5592 chip stf_xl
` (9 preceding siblings ...)
2013-03-16 18:19 ` [PATCH 10/25] rt2800: 5592: initalize BBP_R103 register on new revisions stf_xl
@ 2013-03-16 18:19 ` stf_xl
2013-03-16 18:19 ` [PATCH 12/25] rt2800: 5592: initialize RF_38/39/30 registers stf_xl
` (14 subsequent siblings)
25 siblings, 0 replies; 27+ messages in thread
From: stf_xl @ 2013-03-16 18:19 UTC (permalink / raw)
To: John W. Linville"; +Cc: linux-wireless, users, Stanislaw Gruszka
From: Stanislaw Gruszka <stf_xl@wp.pl>
Based on:
RT5592LoadRFNormalModeSetup()
from:
DPO_RT5572_LinuxSTA_2.6.1.3_20121022/chips/rt5592.c
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
---
drivers/net/wireless/rt2x00/rt2800lib.c | 3 ++-
1 files changed, 2 insertions(+), 1 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 554bd9b..12e4313 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -4859,7 +4859,8 @@ static int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
rt2800_rfcsr_write(rt2x00dev, 17, rfcsr);
}
- if (rt2x00_rt(rt2x00dev, RT3090)) {
+ if (rt2x00_rt(rt2x00dev, RT3090) ||
+ rt2x00_rt(rt2x00dev, RT5592)) {
rt2800_bbp_read(rt2x00dev, 138, &bbp);
/* Turn off unused DAC1 and ADC1 to reduce power consumption */
--
1.7.4.4
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 12/25] rt2800: 5592: initialize RF_38/39/30 registers
2013-03-16 18:19 [PATCH 0/25] rt2800: add experimental support for 5592 chip stf_xl
` (10 preceding siblings ...)
2013-03-16 18:19 ` [PATCH 11/25] rt2800: 5592: initialize BBP_R138 register stf_xl
@ 2013-03-16 18:19 ` stf_xl
2013-03-16 18:19 ` [PATCH 13/25] rt2800: 5592: init frequency calibration stf_xl
` (13 subsequent siblings)
25 siblings, 0 replies; 27+ messages in thread
From: stf_xl @ 2013-03-16 18:19 UTC (permalink / raw)
To: John W. Linville"; +Cc: linux-wireless, users, Stanislaw Gruszka
From: Stanislaw Gruszka <stf_xl@wp.pl>
Based on:
RT5592LoadRFNormalModeSetup()
from:
DPO_RT5572_LinuxSTA_2.6.1.3_20121022/chips/rt5592.c
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
---
drivers/net/wireless/rt2x00/rt2800lib.c | 3 ++-
1 files changed, 2 insertions(+), 1 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 12e4313..54d9089 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -4916,7 +4916,8 @@ static int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
}
if (rt2x00_rt(rt2x00dev, RT5390) ||
- rt2x00_rt(rt2x00dev, RT5392)) {
+ rt2x00_rt(rt2x00dev, RT5392) ||
+ rt2x00_rt(rt2x00dev, RT5592)) {
rt2800_rfcsr_read(rt2x00dev, 38, &rfcsr);
rt2x00_set_field8(&rfcsr, RFCSR38_RX_LO1_EN, 0);
rt2800_rfcsr_write(rt2x00dev, 38, rfcsr);
--
1.7.4.4
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 13/25] rt2800: 5592: init frequency calibration
2013-03-16 18:19 [PATCH 0/25] rt2800: add experimental support for 5592 chip stf_xl
` (11 preceding siblings ...)
2013-03-16 18:19 ` [PATCH 12/25] rt2800: 5592: initialize RF_38/39/30 registers stf_xl
@ 2013-03-16 18:19 ` stf_xl
2013-03-16 18:19 ` [PATCH 14/25] rt2800: 5592: setup LDO_CFG0 when configuring channel stf_xl
` (12 subsequent siblings)
25 siblings, 0 replies; 27+ messages in thread
From: stf_xl @ 2013-03-16 18:19 UTC (permalink / raw)
To: John W. Linville"; +Cc: linux-wireless, users, Stanislaw Gruszka
From: Stanislaw Gruszka <stf_xl@wp.pl>
Based on:
InitFrequencyCalibrationMode()
RT5592_ChipCap
from:
DPO_RT5572_LinuxSTA_2.6.1.3_20121022/common/frq_cal.c
DPO_RT5572_LinuxSTA_2.6.1.3_20121022/chips/rt5592.c
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
---
drivers/net/wireless/rt2x00/rt2800lib.c | 12 +++++++++---
1 files changed, 9 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 54d9089..93b9def 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -3744,6 +3744,12 @@ static void rt2800_bbp4_mac_if_ctrl(struct rt2x00_dev *rt2x00dev)
rt2800_bbp_write(rt2x00dev, 4, value);
}
+static void rt2800_init_freq_calibration(struct rt2x00_dev *rt2x00dev)
+{
+ rt2800_bbp_write(rt2x00dev, 142, 1);
+ rt2800_bbp_write(rt2x00dev, 143, 57);
+}
+
static void rt2800_init_bbp_5592_glrt(struct rt2x00_dev *rt2x00dev)
{
const u8 glrt_table[] = {
@@ -3852,6 +3858,8 @@ static void rt2800_init_bbp_5592(struct rt2x00_dev *rt2x00dev)
rt2800_bbp_write(rt2x00dev, 254, value);
}
+ rt2800_init_freq_calibration(rt2x00dev);
+
rt2800_bbp_write(rt2x00dev, 84, 0x19);
if (rt2x00_rt_rev_gte(rt2x00dev, RT5592, REV_RT5592C))
rt2800_bbp_write(rt2x00dev, 103, 0xc0);
@@ -4155,9 +4163,7 @@ static int rt2800_init_bbp(struct rt2x00_dev *rt2x00dev)
rt2x00_set_field8(&value, BBP152_RX_DEFAULT_ANT, 0);
rt2800_bbp_write(rt2x00dev, 152, value);
- /* Init frequency calibration */
- rt2800_bbp_write(rt2x00dev, 142, 1);
- rt2800_bbp_write(rt2x00dev, 143, 57);
+ rt2800_init_freq_calibration(rt2x00dev);
}
for (i = 0; i < EEPROM_BBP_SIZE; i++) {
--
1.7.4.4
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 14/25] rt2800: 5592: setup LDO_CFG0 when configuring channel
2013-03-16 18:19 [PATCH 0/25] rt2800: add experimental support for 5592 chip stf_xl
` (12 preceding siblings ...)
2013-03-16 18:19 ` [PATCH 13/25] rt2800: 5592: init frequency calibration stf_xl
@ 2013-03-16 18:19 ` stf_xl
2013-03-16 18:19 ` [PATCH 15/25] rt2800: 5592: enable rf init stf_xl
` (11 subsequent siblings)
25 siblings, 0 replies; 27+ messages in thread
From: stf_xl @ 2013-03-16 18:19 UTC (permalink / raw)
To: John W. Linville"; +Cc: linux-wireless, users, Stanislaw Gruszka
From: Stanislaw Gruszka <stf_xl@wp.pl>
Based on:
RT5592_ChipSwitchChannel()
from:
DPO_RT5572_LinuxSTA_2.6.1.3_20121022/chips/rt5592.c
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
---
drivers/net/wireless/rt2x00/rt2800lib.c | 5 +++++
1 files changed, 5 insertions(+), 0 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 93b9def..189c880 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -2187,12 +2187,17 @@ static void rt2800_config_channel_rf55xx(struct rt2x00_dev *rt2x00dev,
struct channel_info *info)
{
u8 rfcsr, ep_reg;
+ u32 reg;
int power_bound;
/* TODO */
const bool is_11b = false;
const bool is_type_ep = false;
+ rt2800_register_read(rt2x00dev, LDO_CFG0, ®);
+ rt2x00_set_field32(®, LDO_CFG0_LDO_CORE_VLEVEL,
+ (rf->channel > 14 || conf_is_ht40(conf)) ? 5 : 0);
+ rt2800_register_write(rt2x00dev, LDO_CFG0, reg);
/* Order of values on rf_channel entry: N, K, mod, R */
rt2800_rfcsr_write(rt2x00dev, 8, rf->rf1 & 0xff);
--
1.7.4.4
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 15/25] rt2800: 5592: enable rf init
2013-03-16 18:19 [PATCH 0/25] rt2800: add experimental support for 5592 chip stf_xl
` (13 preceding siblings ...)
2013-03-16 18:19 ` [PATCH 14/25] rt2800: 5592: setup LDO_CFG0 when configuring channel stf_xl
@ 2013-03-16 18:19 ` stf_xl
2013-03-16 18:19 ` [PATCH 16/25] rt2800: 5592: more channel switch registers settings (BBP & GLRT) stf_xl
` (10 subsequent siblings)
25 siblings, 0 replies; 27+ messages in thread
From: stf_xl @ 2013-03-16 18:19 UTC (permalink / raw)
To: John W. Linville"; +Cc: linux-wireless, users, Stanislaw Gruszka
From: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
---
drivers/net/wireless/rt2x00/rt2800lib.c | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 189c880..1650cf4 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -4691,6 +4691,7 @@ static int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
!rt2x00_rt(rt2x00dev, RT5390) &&
!rt2x00_rt(rt2x00dev, RT5392) &&
!rt2x00_rt(rt2x00dev, RT5392) &&
+ !rt2x00_rt(rt2x00dev, RT5592) &&
!rt2800_is_305x_soc(rt2x00dev))
return 0;
--
1.7.4.4
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 16/25] rt2800: 5592: more channel switch registers settings (BBP & GLRT)
2013-03-16 18:19 [PATCH 0/25] rt2800: add experimental support for 5592 chip stf_xl
` (14 preceding siblings ...)
2013-03-16 18:19 ` [PATCH 15/25] rt2800: 5592: enable rf init stf_xl
@ 2013-03-16 18:19 ` stf_xl
2013-03-16 18:19 ` [PATCH 17/25] rt2800: 5592: add iq calibration stf_xl
` (9 subsequent siblings)
25 siblings, 0 replies; 27+ messages in thread
From: stf_xl @ 2013-03-16 18:19 UTC (permalink / raw)
To: John W. Linville"; +Cc: linux-wireless, users, Stanislaw Gruszka
From: Stanislaw Gruszka <stf_xl@wp.pl>
Based on:
RT5592_ChipSwitchChannel()
from:
DPO_RT5572_LinuxSTA_2.6.1.3_20121022/chips/rt5592.c
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
---
drivers/net/wireless/rt2x00/rt2800lib.c | 32 +++++++++++++++++++++++++++++++
1 files changed, 32 insertions(+), 0 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 1650cf4..c990ab8 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -2430,6 +2430,30 @@ static void rt2800_config_channel_rf55xx(struct rt2x00_dev *rt2x00dev,
rt2800_rfcsr_read(rt2x00dev, 3, &rfcsr);
rt2x00_set_field8(&rfcsr, RFCSR3_VCOCAL_EN, 1);
rt2800_rfcsr_write(rt2x00dev, 3, rfcsr);
+
+ /* BBP settings */
+ rt2800_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain);
+ rt2800_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain);
+ rt2800_bbp_write(rt2x00dev, 64, 0x37 - rt2x00dev->lna_gain);
+
+ rt2800_bbp_write(rt2x00dev, 79, (rf->channel <= 14) ? 0x1C : 0x18);
+ rt2800_bbp_write(rt2x00dev, 80, (rf->channel <= 14) ? 0x0E : 0x08);
+ rt2800_bbp_write(rt2x00dev, 81, (rf->channel <= 14) ? 0x3A : 0x38);
+ rt2800_bbp_write(rt2x00dev, 82, (rf->channel <= 14) ? 0x62 : 0x92);
+
+ /* GLRT band configuration */
+ rt2800_bbp_write(rt2x00dev, 195, 128);
+ rt2800_bbp_write(rt2x00dev, 196, (rf->channel <= 14) ? 0xE0 : 0xF0);
+ rt2800_bbp_write(rt2x00dev, 195, 129);
+ rt2800_bbp_write(rt2x00dev, 196, (rf->channel <= 14) ? 0x1F : 0x1E);
+ rt2800_bbp_write(rt2x00dev, 195, 130);
+ rt2800_bbp_write(rt2x00dev, 196, (rf->channel <= 14) ? 0x38 : 0x28);
+ rt2800_bbp_write(rt2x00dev, 195, 131);
+ rt2800_bbp_write(rt2x00dev, 196, (rf->channel <= 14) ? 0x32 : 0x20);
+ rt2800_bbp_write(rt2x00dev, 195, 133);
+ rt2800_bbp_write(rt2x00dev, 196, (rf->channel <= 14) ? 0x28 : 0x7F);
+ rt2800_bbp_write(rt2x00dev, 195, 124);
+ rt2800_bbp_write(rt2x00dev, 196, (rf->channel <= 14) ? 0x19 : 0x7F);
}
static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
@@ -2577,6 +2601,14 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
if (rt2x00_rt(rt2x00dev, RT3572))
rt2800_rfcsr_write(rt2x00dev, 8, 0x80);
+ if (rt2x00_rt(rt2x00dev, RT5592)) {
+ rt2800_bbp_write(rt2x00dev, 195, 141);
+ rt2800_bbp_write(rt2x00dev, 196, conf_is_ht40(conf) ? 0x10 : 0x1a);
+
+ /* TODO AGC adjust */
+ /* TODO IQ calibration */
+ }
+
rt2800_bbp_read(rt2x00dev, 4, &bbp);
rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * conf_is_ht40(conf));
rt2800_bbp_write(rt2x00dev, 4, bbp);
--
1.7.4.4
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 17/25] rt2800: 5592: add iq calibration
2013-03-16 18:19 [PATCH 0/25] rt2800: add experimental support for 5592 chip stf_xl
` (15 preceding siblings ...)
2013-03-16 18:19 ` [PATCH 16/25] rt2800: 5592: more channel switch registers settings (BBP & GLRT) stf_xl
@ 2013-03-16 18:19 ` stf_xl
2013-03-16 18:19 ` [PATCH 18/25] rt2800: rearrange bbp/rfcsr initialization stf_xl
` (8 subsequent siblings)
25 siblings, 0 replies; 27+ messages in thread
From: stf_xl @ 2013-03-16 18:19 UTC (permalink / raw)
To: John W. Linville"; +Cc: linux-wireless, users, Stanislaw Gruszka
From: Stanislaw Gruszka <stf_xl@wp.pl>
Based on:
GetIQCalibration()
IQCalibration()
from:
DPO_RT5572_LinuxSTA_2.6.1.3_20121022/chips/rtmp_chip.c
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
---
drivers/net/wireless/rt2x00/rt2800.h | 55 +++++++++++++++++++++++++++++++
drivers/net/wireless/rt2x00/rt2800lib.c | 41 ++++++++++++++++++++++-
drivers/net/wireless/rt2x00/rt2x00.h | 9 ++++-
3 files changed, 101 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h
index 9d18d53..25c94b5 100644
--- a/drivers/net/wireless/rt2x00/rt2800.h
+++ b/drivers/net/wireless/rt2x00/rt2800.h
@@ -2532,6 +2532,61 @@ struct mac_iveiv_entry {
#define EEPROM_BBP_REG_ID FIELD16(0xff00)
/*
+ * EEPROM IQ Calibration, unlike other entries those are byte addresses.
+ */
+
+#define EEPROM_IQ_GAIN_CAL_TX0_2G 0x130
+#define EEPROM_IQ_PHASE_CAL_TX0_2G 0x131
+#define EEPROM_IQ_GROUPDELAY_CAL_TX0_2G 0x132
+#define EEPROM_IQ_GAIN_CAL_TX1_2G 0x133
+#define EEPROM_IQ_PHASE_CAL_TX1_2G 0x134
+#define EEPROM_IQ_GROUPDELAY_CAL_TX1_2G 0x135
+#define EEPROM_IQ_GAIN_CAL_RX0_2G 0x136
+#define EEPROM_IQ_PHASE_CAL_RX0_2G 0x137
+#define EEPROM_IQ_GROUPDELAY_CAL_RX0_2G 0x138
+#define EEPROM_IQ_GAIN_CAL_RX1_2G 0x139
+#define EEPROM_IQ_PHASE_CAL_RX1_2G 0x13A
+#define EEPROM_IQ_GROUPDELAY_CAL_RX1_2G 0x13B
+#define EEPROM_RF_IQ_COMPENSATION_CONTROL 0x13C
+#define EEPROM_RF_IQ_IMBALANCE_COMPENSATION_CONTROL 0x13D
+#define EEPROM_IQ_GAIN_CAL_TX0_CH36_TO_CH64_5G 0x144
+#define EEPROM_IQ_PHASE_CAL_TX0_CH36_TO_CH64_5G 0x145
+#define EEPROM_IQ_GAIN_CAL_TX0_CH100_TO_CH138_5G 0X146
+#define EEPROM_IQ_PHASE_CAL_TX0_CH100_TO_CH138_5G 0x147
+#define EEPROM_IQ_GAIN_CAL_TX0_CH140_TO_CH165_5G 0x148
+#define EEPROM_IQ_PHASE_CAL_TX0_CH140_TO_CH165_5G 0x149
+#define EEPROM_IQ_GAIN_CAL_TX1_CH36_TO_CH64_5G 0x14A
+#define EEPROM_IQ_PHASE_CAL_TX1_CH36_TO_CH64_5G 0x14B
+#define EEPROM_IQ_GAIN_CAL_TX1_CH100_TO_CH138_5G 0X14C
+#define EEPROM_IQ_PHASE_CAL_TX1_CH100_TO_CH138_5G 0x14D
+#define EEPROM_IQ_GAIN_CAL_TX1_CH140_TO_CH165_5G 0x14E
+#define EEPROM_IQ_PHASE_CAL_TX1_CH140_TO_CH165_5G 0x14F
+#define EEPROM_IQ_GROUPDELAY_CAL_TX0_CH36_TO_CH64_5G 0x150
+#define EEPROM_IQ_GROUPDELAY_CAL_TX1_CH36_TO_CH64_5G 0x151
+#define EEPROM_IQ_GROUPDELAY_CAL_TX0_CH100_TO_CH138_5G 0x152
+#define EEPROM_IQ_GROUPDELAY_CAL_TX1_CH100_TO_CH138_5G 0x153
+#define EEPROM_IQ_GROUPDELAY_CAL_TX0_CH140_TO_CH165_5G 0x154
+#define EEPROM_IQ_GROUPDELAY_CAL_TX1_CH140_TO_CH165_5G 0x155
+#define EEPROM_IQ_GAIN_CAL_RX0_CH36_TO_CH64_5G 0x156
+#define EEPROM_IQ_PHASE_CAL_RX0_CH36_TO_CH64_5G 0x157
+#define EEPROM_IQ_GAIN_CAL_RX0_CH100_TO_CH138_5G 0X158
+#define EEPROM_IQ_PHASE_CAL_RX0_CH100_TO_CH138_5G 0x159
+#define EEPROM_IQ_GAIN_CAL_RX0_CH140_TO_CH165_5G 0x15A
+#define EEPROM_IQ_PHASE_CAL_RX0_CH140_TO_CH165_5G 0x15B
+#define EEPROM_IQ_GAIN_CAL_RX1_CH36_TO_CH64_5G 0x15C
+#define EEPROM_IQ_PHASE_CAL_RX1_CH36_TO_CH64_5G 0x15D
+#define EEPROM_IQ_GAIN_CAL_RX1_CH100_TO_CH138_5G 0X15E
+#define EEPROM_IQ_PHASE_CAL_RX1_CH100_TO_CH138_5G 0x15F
+#define EEPROM_IQ_GAIN_CAL_RX1_CH140_TO_CH165_5G 0x160
+#define EEPROM_IQ_PHASE_CAL_RX1_CH140_TO_CH165_5G 0x161
+#define EEPROM_IQ_GROUPDELAY_CAL_RX0_CH36_TO_CH64_5G 0x162
+#define EEPROM_IQ_GROUPDELAY_CAL_RX1_CH36_TO_CH64_5G 0x163
+#define EEPROM_IQ_GROUPDELAY_CAL_RX0_CH100_TO_CH138_5G 0x164
+#define EEPROM_IQ_GROUPDELAY_CAL_RX1_CH100_TO_CH138_5G 0x165
+#define EEPROM_IQ_GROUPDELAY_CAL_RX0_CH140_TO_CH165_5G 0x166
+#define EEPROM_IQ_GROUPDELAY_CAL_RX1_CH140_TO_CH165_5G 0x167
+
+/*
* MCU mailbox commands.
* MCU_SLEEP - go to power-save mode.
* arg1: 1: save as much power as possible, 0: save less power.
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index c990ab8..e96ea32 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -527,8 +527,10 @@ int rt2800_load_firmware(struct rt2x00_dev *rt2x00dev,
*/
rt2800_register_write(rt2x00dev, H2M_BBP_AGENT, 0);
rt2800_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
- if (rt2x00_is_usb(rt2x00dev))
+ if (rt2x00_is_usb(rt2x00dev)) {
rt2800_register_write(rt2x00dev, H2M_INT_SRC, 0);
+ rt2800_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0, 0, 0);
+ }
msleep(1);
return 0;
@@ -2456,6 +2458,41 @@ static void rt2800_config_channel_rf55xx(struct rt2x00_dev *rt2x00dev,
rt2800_bbp_write(rt2x00dev, 196, (rf->channel <= 14) ? 0x19 : 0x7F);
}
+static void rt2800_iq_calibrate(struct rt2x00_dev *rt2x00dev, int channel)
+{
+ u8 cal;
+
+ /* TODO */
+ if (WARN_ON_ONCE(channel > 14))
+ return;
+
+ rt2800_bbp_write(rt2x00dev, 158, 0x2c);
+ cal = rt2x00_eeprom_byte(rt2x00dev, EEPROM_IQ_GAIN_CAL_TX0_2G);
+ rt2800_bbp_write(rt2x00dev, 159, cal);
+
+ rt2800_bbp_write(rt2x00dev, 158, 0x2d);
+ cal = rt2x00_eeprom_byte(rt2x00dev, EEPROM_IQ_PHASE_CAL_TX0_2G);
+ rt2800_bbp_write(rt2x00dev, 159, cal);
+
+ rt2800_bbp_write(rt2x00dev, 158, 0x4a);
+ cal = rt2x00_eeprom_byte(rt2x00dev, EEPROM_IQ_GAIN_CAL_TX1_2G);
+ rt2800_bbp_write(rt2x00dev, 159, cal);
+
+ rt2800_bbp_write(rt2x00dev, 158, 0x4b);
+ cal = rt2x00_eeprom_byte(rt2x00dev, EEPROM_IQ_PHASE_CAL_TX1_2G);
+ rt2800_bbp_write(rt2x00dev, 159, cal);
+
+ /* RF IQ compensation control */
+ rt2800_bbp_write(rt2x00dev, 158, 0x04);
+ cal = rt2x00_eeprom_byte(rt2x00dev, EEPROM_RF_IQ_COMPENSATION_CONTROL);
+ rt2800_bbp_write(rt2x00dev, 159, cal != 0xff ? cal : 0);
+
+ /* RF IQ imbalance compensation control */
+ rt2800_bbp_write(rt2x00dev, 158, 0x03);
+ cal = rt2x00_eeprom_byte(rt2x00dev, EEPROM_RF_IQ_IMBALANCE_COMPENSATION_CONTROL);
+ rt2800_bbp_write(rt2x00dev, 159, cal != 0xff ? cal : 0);
+}
+
static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
struct ieee80211_conf *conf,
struct rf_channel *rf,
@@ -2606,7 +2643,7 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
rt2800_bbp_write(rt2x00dev, 196, conf_is_ht40(conf) ? 0x10 : 0x1a);
/* TODO AGC adjust */
- /* TODO IQ calibration */
+ rt2800_iq_calibrate(rt2x00dev, rf->channel);
}
rt2800_bbp_read(rt2x00dev, 4, &bbp);
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index 4251835..51922cc 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -1065,8 +1065,7 @@ static inline void rt2x00_rf_write(struct rt2x00_dev *rt2x00dev,
}
/*
- * Generic EEPROM access.
- * The EEPROM is being accessed by word index.
+ * Generic EEPROM access. The EEPROM is being accessed by word or byte index.
*/
static inline void *rt2x00_eeprom_addr(struct rt2x00_dev *rt2x00dev,
const unsigned int word)
@@ -1086,6 +1085,12 @@ static inline void rt2x00_eeprom_write(struct rt2x00_dev *rt2x00dev,
rt2x00dev->eeprom[word] = cpu_to_le16(data);
}
+static inline u8 rt2x00_eeprom_byte(struct rt2x00_dev *rt2x00dev,
+ const unsigned int byte)
+{
+ return *(((u8 *)rt2x00dev->eeprom) + byte);
+}
+
/*
* Chipset handlers
*/
--
1.7.4.4
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 18/25] rt2800: rearrange bbp/rfcsr initialization
2013-03-16 18:19 [PATCH 0/25] rt2800: add experimental support for 5592 chip stf_xl
` (16 preceding siblings ...)
2013-03-16 18:19 ` [PATCH 17/25] rt2800: 5592: add iq calibration stf_xl
@ 2013-03-16 18:19 ` stf_xl
2013-03-16 18:19 ` [PATCH 19/25] rt2800: add write_with_rx_chain function stf_xl
` (7 subsequent siblings)
25 siblings, 0 replies; 27+ messages in thread
From: stf_xl @ 2013-03-16 18:19 UTC (permalink / raw)
To: John W. Linville"; +Cc: linux-wireless, users, Stanislaw Gruszka
From: Stanislaw Gruszka <stf_xl@wp.pl>
This makes order of initialization of various registers similar like
on vendor driver.
Based on:
NICInitializeAsic()
RT5592LoadRFNormalModeSetup()
from:
DPO_RT5572_LinuxSTA_2.6.1.3_20121022/common/rtmp_init.c
DPO_RT5572_LinuxSTA_2.6.1.3_20121022/chip/rt5592.c
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
---
drivers/net/wireless/rt2x00/rt2800lib.c | 50 +++++++++++++++++++++++++++---
1 files changed, 45 insertions(+), 5 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index e96ea32..e36cf4a 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -4713,6 +4713,9 @@ static void rt2800_init_rfcsr_5392(struct rt2x00_dev *rt2x00dev)
static void rt2800_init_rfcsr_5592(struct rt2x00_dev *rt2x00dev)
{
+ u8 reg;
+ u16 eeprom;
+
rt2800_rfcsr_write(rt2x00dev, 1, 0x3F);
rt2800_rfcsr_write(rt2x00dev, 3, 0x08);
rt2800_rfcsr_write(rt2x00dev, 3, 0x08);
@@ -4740,6 +4743,35 @@ static void rt2800_init_rfcsr_5592(struct rt2x00_dev *rt2x00dev)
msleep(1);
rt2800_adjust_freq_offset(rt2x00dev);
+
+ rt2800_bbp_read(rt2x00dev, 138, ®);
+
+ /* Turn off unused DAC1 and ADC1 to reduce power consumption */
+ rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC_CONF0, &eeprom);
+ if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_RXPATH) == 1)
+ rt2x00_set_field8(®, BBP138_RX_ADC1, 0);
+ if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF0_TXPATH) == 1)
+ rt2x00_set_field8(®, BBP138_TX_DAC1, 1);
+
+ rt2800_bbp_write(rt2x00dev, 138, reg);
+
+ /* Enable DC filter */
+ if (rt2x00_rt_rev_gte(rt2x00dev, RT5592, REV_RT5592C))
+ rt2800_bbp_write(rt2x00dev, 103, 0xc0);
+
+ rt2800_rfcsr_read(rt2x00dev, 38, ®);
+ rt2x00_set_field8(®, RFCSR38_RX_LO1_EN, 0);
+ rt2800_rfcsr_write(rt2x00dev, 38, reg);
+
+ rt2800_rfcsr_read(rt2x00dev, 39, ®);
+ rt2x00_set_field8(®, RFCSR39_RX_LO2_EN, 0);
+ rt2800_rfcsr_write(rt2x00dev, 39, reg);
+
+ rt2800_bbp4_mac_if_ctrl(rt2x00dev);
+
+ rt2800_rfcsr_read(rt2x00dev, 30, ®);
+ rt2x00_set_field8(®, RFCSR30_RX_VCM, 2);
+ rt2800_rfcsr_write(rt2x00dev, 30, reg);
}
static int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
@@ -4817,7 +4849,7 @@ static int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
break;
case RT5592:
rt2800_init_rfcsr_5592(rt2x00dev);
- break;
+ return 0;
}
if (rt2x00_rt_rev_lt(rt2x00dev, RT3070, REV_RT3070F)) {
@@ -5024,15 +5056,23 @@ int rt2800_enable_radio(struct rt2x00_dev *rt2x00dev)
* Initialize all registers.
*/
if (unlikely(rt2800_wait_wpdma_ready(rt2x00dev) ||
- rt2800_init_registers(rt2x00dev) ||
- rt2800_init_bbp(rt2x00dev) ||
- rt2800_init_rfcsr(rt2x00dev)))
+ rt2800_init_registers(rt2x00dev)))
return -EIO;
/*
* Send signal to firmware during boot time.
*/
- rt2800_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0, 0, 0);
+ rt2800_register_write(rt2x00dev, H2M_BBP_AGENT, 0);
+ rt2800_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
+ if (rt2x00_is_usb(rt2x00dev)) {
+ rt2800_register_write(rt2x00dev, H2M_INT_SRC, 0);
+ rt2800_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0, 0, 0);
+ }
+ msleep(1);
+
+ if (unlikely(rt2800_init_bbp(rt2x00dev) ||
+ rt2800_init_rfcsr(rt2x00dev)))
+ return -EIO;
if (rt2x00_is_usb(rt2x00dev) &&
(rt2x00_rt(rt2x00dev, RT3070) ||
--
1.7.4.4
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 19/25] rt2800: add write_with_rx_chain function
2013-03-16 18:19 [PATCH 0/25] rt2800: add experimental support for 5592 chip stf_xl
` (17 preceding siblings ...)
2013-03-16 18:19 ` [PATCH 18/25] rt2800: rearrange bbp/rfcsr initialization stf_xl
@ 2013-03-16 18:19 ` stf_xl
2013-03-16 18:19 ` [PATCH 20/25] rt2800: 5592: add AGC init stf_xl
` (6 subsequent siblings)
25 siblings, 0 replies; 27+ messages in thread
From: stf_xl @ 2013-03-16 18:19 UTC (permalink / raw)
To: John W. Linville"; +Cc: linux-wireless, users, Stanislaw Gruszka
From: Stanislaw Gruszka <stf_xl@wp.pl>
Based on:
AsicBBPWriteWithRxChain()
from:
DPO_RT5572_LinuxSTA_2.6.1.3_20121022/chips/rtmp_chip.c
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
---
drivers/net/wireless/rt2x00/rt2800.h | 3 +++
drivers/net/wireless/rt2x00/rt2800lib.c | 16 ++++++++++++++++
2 files changed, 19 insertions(+), 0 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h
index 25c94b5..6105243 100644
--- a/drivers/net/wireless/rt2x00/rt2800.h
+++ b/drivers/net/wireless/rt2x00/rt2800.h
@@ -1939,6 +1939,9 @@ struct mac_iveiv_entry {
#define BBP4_BANDWIDTH FIELD8(0x18)
#define BBP4_MAC_IF_CTRL FIELD8(0x40)
+/* BBP27 */
+#define BBP27_RX_CHAIN_SEL FIELD8(0x60)
+
/*
* BBP 47: Bandwidth
*/
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index e36cf4a..9fa10b0 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -2458,6 +2458,22 @@ static void rt2800_config_channel_rf55xx(struct rt2x00_dev *rt2x00dev,
rt2800_bbp_write(rt2x00dev, 196, (rf->channel <= 14) ? 0x19 : 0x7F);
}
+static void rt2800_bbp_write_with_rx_chain(struct rt2x00_dev *rt2x00dev,
+ const unsigned int word,
+ const u8 value)
+{
+ u8 chain, reg;
+
+ for (chain = 0; chain < rt2x00dev->default_ant.rx_chain_num; chain++) {
+ rt2800_bbp_read(rt2x00dev, 27, ®);
+ rt2x00_set_field8(®, BBP27_RX_CHAIN_SEL, chain);
+ rt2800_bbp_write(rt2x00dev, 27, reg);
+
+ rt2800_bbp_write(rt2x00dev, word, value);
+ }
+}
+
+
static void rt2800_iq_calibrate(struct rt2x00_dev *rt2x00dev, int channel)
{
u8 cal;
--
1.7.4.4
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 20/25] rt2800: 5592: add AGC init
2013-03-16 18:19 [PATCH 0/25] rt2800: add experimental support for 5592 chip stf_xl
` (18 preceding siblings ...)
2013-03-16 18:19 ` [PATCH 19/25] rt2800: add write_with_rx_chain function stf_xl
@ 2013-03-16 18:19 ` stf_xl
2013-03-16 18:19 ` [PATCH 21/25] rt2800: 5592: add chip specific vgc calculations stf_xl
` (5 subsequent siblings)
25 siblings, 0 replies; 27+ messages in thread
From: stf_xl @ 2013-03-16 18:19 UTC (permalink / raw)
To: John W. Linville"; +Cc: linux-wireless, users, Stanislaw Gruszka
From: Stanislaw Gruszka <stf_xl@wp.pl>
Based on:
RT5592_RTMPAGCInit()
from:
DPO_RT5572_LinuxSTA_2.6.1.3_20121022/chips/rt5592.c
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
---
drivers/net/wireless/rt2x00/rt2800lib.c | 5 ++++-
1 files changed, 4 insertions(+), 1 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 9fa10b0..f2446de 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -2658,7 +2658,10 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
rt2800_bbp_write(rt2x00dev, 195, 141);
rt2800_bbp_write(rt2x00dev, 196, conf_is_ht40(conf) ? 0x10 : 0x1a);
- /* TODO AGC adjust */
+ /* AGC init */
+ reg = (rf->channel <= 14 ? 0x1c : 0x24) + 2 * rt2x00dev->lna_gain;
+ rt2800_bbp_write_with_rx_chain(rt2x00dev, 66, reg);
+
rt2800_iq_calibrate(rt2x00dev, rf->channel);
}
--
1.7.4.4
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 21/25] rt2800: 5592: add chip specific vgc calculations
2013-03-16 18:19 [PATCH 0/25] rt2800: add experimental support for 5592 chip stf_xl
` (19 preceding siblings ...)
2013-03-16 18:19 ` [PATCH 20/25] rt2800: 5592: add AGC init stf_xl
@ 2013-03-16 18:19 ` stf_xl
2013-03-16 18:19 ` [PATCH 22/25] rt2800: 5592: TXWI & RXWI descriptors size stf_xl
` (4 subsequent siblings)
25 siblings, 0 replies; 27+ messages in thread
From: stf_xl @ 2013-03-16 18:19 UTC (permalink / raw)
To: John W. Linville"; +Cc: linux-wireless, users, Stanislaw Gruszka
From: Stanislaw Gruszka <stf_xl@wp.pl>
Based on:
RT5592_ChipAGCAdjust()
from:
DPO_RT5572_LinuxSTA_2.6.1.3_20121022/chips/rt5592.c
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
---
drivers/net/wireless/rt2x00/rt2800lib.c | 29 ++++++++++++++++++++++-------
1 files changed, 22 insertions(+), 7 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index f2446de..5adb92b 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -3277,13 +3277,16 @@ static u8 rt2800_get_default_vgc(struct rt2x00_dev *rt2x00dev)
rt2x00_rt(rt2x00dev, RT3390) ||
rt2x00_rt(rt2x00dev, RT3572) ||
rt2x00_rt(rt2x00dev, RT5390) ||
- rt2x00_rt(rt2x00dev, RT5392))
+ rt2x00_rt(rt2x00dev, RT5392) ||
+ rt2x00_rt(rt2x00dev, RT5592))
vgc = 0x1c + (2 * rt2x00dev->lna_gain);
else
vgc = 0x2e + rt2x00dev->lna_gain;
} else { /* 5GHZ band */
if (rt2x00_rt(rt2x00dev, RT3572))
vgc = 0x22 + (rt2x00dev->lna_gain * 5) / 3;
+ else if (rt2x00_rt(rt2x00dev, RT5592))
+ vgc = 0x24 + (2 * rt2x00dev->lna_gain);
else {
if (!test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags))
vgc = 0x32 + (rt2x00dev->lna_gain * 5) / 3;
@@ -3299,7 +3302,11 @@ static inline void rt2800_set_vgc(struct rt2x00_dev *rt2x00dev,
struct link_qual *qual, u8 vgc_level)
{
if (qual->vgc_level != vgc_level) {
- rt2800_bbp_write(rt2x00dev, 66, vgc_level);
+ if (rt2x00_rt(rt2x00dev, RT5592)) {
+ rt2800_bbp_write(rt2x00dev, 83, qual->rssi > -65 ? 0x4a : 0x7a);
+ rt2800_bbp_write_with_rx_chain(rt2x00dev, 66, vgc_level);
+ } else
+ rt2800_bbp_write(rt2x00dev, 66, vgc_level);
qual->vgc_level = vgc_level;
qual->vgc_level_reg = vgc_level;
}
@@ -3314,15 +3321,23 @@ EXPORT_SYMBOL_GPL(rt2800_reset_tuner);
void rt2800_link_tuner(struct rt2x00_dev *rt2x00dev, struct link_qual *qual,
const u32 count)
{
+ u8 vgc;
+
if (rt2x00_rt_rev(rt2x00dev, RT2860, REV_RT2860C))
return;
-
/*
- * When RSSI is better then -80 increase VGC level with 0x10
+ * When RSSI is better then -80 increase VGC level with 0x10, except
+ * for rt5592 chip.
*/
- rt2800_set_vgc(rt2x00dev, qual,
- rt2800_get_default_vgc(rt2x00dev) +
- ((qual->rssi > -80) * 0x10));
+
+ vgc = rt2800_get_default_vgc(rt2x00dev);
+
+ if (rt2x00_rt(rt2x00dev, RT5592) && qual->rssi > -65)
+ vgc += 0x20;
+ else if (qual->rssi > -80)
+ vgc += 0x10;
+
+ rt2800_set_vgc(rt2x00dev, qual, vgc);
}
EXPORT_SYMBOL_GPL(rt2800_link_tuner);
--
1.7.4.4
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 22/25] rt2800: 5592: TXWI & RXWI descriptors size
2013-03-16 18:19 [PATCH 0/25] rt2800: add experimental support for 5592 chip stf_xl
` (20 preceding siblings ...)
2013-03-16 18:19 ` [PATCH 21/25] rt2800: 5592: add chip specific vgc calculations stf_xl
@ 2013-03-16 18:19 ` stf_xl
2013-03-16 18:19 ` [PATCH 23/25] rt2800: 5592: add Kconfig stf_xl
` (3 subsequent siblings)
25 siblings, 0 replies; 27+ messages in thread
From: stf_xl @ 2013-03-16 18:19 UTC (permalink / raw)
To: John W. Linville"; +Cc: linux-wireless, users, Stanislaw Gruszka
From: Stanislaw Gruszka <stf_xl@wp.pl>
Based on:
TXWI_STRUC
RXWI_STRUC
from:
DPO_RT5572_LinuxSTA_2.6.1.3_20121022/include/chip/rtmp_mac.h
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
---
drivers/net/wireless/rt2x00/rt2800.h | 2 +
drivers/net/wireless/rt2x00/rt2800lib.c | 5 ---
drivers/net/wireless/rt2x00/rt2800pci.c | 5 +++
drivers/net/wireless/rt2x00/rt2800usb.c | 53 +++++++++++++++++++++++++++++-
4 files changed, 58 insertions(+), 7 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h
index 6105243..a7630d5 100644
--- a/drivers/net/wireless/rt2x00/rt2800.h
+++ b/drivers/net/wireless/rt2x00/rt2800.h
@@ -2628,6 +2628,8 @@ struct mac_iveiv_entry {
#define TXWI_DESC_SIZE (4 * sizeof(__le32))
#define RXWI_DESC_SIZE (4 * sizeof(__le32))
+#define TXWI_DESC_SIZE_5592 (5 * sizeof(__le32))
+#define RXWI_DESC_SIZE_5592 (6 * sizeof(__le32))
/*
* TX WI structure
*/
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 5adb92b..9b1f293 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -676,11 +676,6 @@ void rt2800_process_rxwi(struct queue_entry *entry,
* Convert descriptor AGC value to RSSI value.
*/
rxdesc->rssi = rt2800_agc_to_rssi(entry->queue->rt2x00dev, word);
-
- /*
- * Remove RXWI descriptor from start of buffer.
- */
- skb_pull(entry->skb, RXWI_DESC_SIZE);
}
EXPORT_SYMBOL_GPL(rt2800_process_rxwi);
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index 48a01aa..5b3295d 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -729,6 +729,11 @@ static void rt2800pci_fill_rxdone(struct queue_entry *entry,
* Process the RXWI structure that is at the start of the buffer.
*/
rt2800_process_rxwi(entry, rxdesc);
+
+ /*
+ * Remove RXWI descriptor from start of buffer.
+ */
+ skb_pull(entry->skb, RXWI_DESC_SIZE);
}
/*
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index f9ca795..9b1ca67 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -485,7 +485,7 @@ static void rt2800usb_write_tx_desc(struct queue_entry *entry,
*/
skbdesc->flags |= SKBDESC_DESC_IN_SKB;
skbdesc->desc = txi;
- skbdesc->desc_len = TXINFO_DESC_SIZE + TXWI_DESC_SIZE;
+ skbdesc->desc_len = entry->queue->desc_size;
}
/*
@@ -730,6 +730,11 @@ static void rt2800usb_fill_rxdone(struct queue_entry *entry,
* Process the RXWI structure.
*/
rt2800_process_rxwi(entry, rxdesc);
+
+ /*
+ * Remove RXWI descriptor from start of buffer.
+ */
+ skb_pull(entry->skb, entry->queue->desc_size - RXINFO_DESC_SIZE);
}
/*
@@ -890,6 +895,47 @@ static const struct rt2x00_ops rt2800usb_ops = {
#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
};
+static const struct data_queue_desc rt2800usb_queue_rx_5592 = {
+ .entry_num = 128,
+ .data_size = AGGREGATION_SIZE,
+ .desc_size = RXINFO_DESC_SIZE + RXWI_DESC_SIZE_5592,
+ .priv_size = sizeof(struct queue_entry_priv_usb),
+};
+
+static const struct data_queue_desc rt2800usb_queue_tx_5592 = {
+ .entry_num = 16,
+ .data_size = AGGREGATION_SIZE,
+ .desc_size = TXINFO_DESC_SIZE + TXWI_DESC_SIZE_5592,
+ .priv_size = sizeof(struct queue_entry_priv_usb),
+};
+
+static const struct data_queue_desc rt2800usb_queue_bcn_5592 = {
+ .entry_num = 8,
+ .data_size = MGMT_FRAME_SIZE,
+ .desc_size = TXINFO_DESC_SIZE + TXWI_DESC_SIZE_5592,
+ .priv_size = sizeof(struct queue_entry_priv_usb),
+};
+
+
+static const struct rt2x00_ops rt2800usb_ops_5592 = {
+ .name = KBUILD_MODNAME,
+ .drv_data_size = sizeof(struct rt2800_drv_data),
+ .max_ap_intf = 8,
+ .eeprom_size = EEPROM_SIZE,
+ .rf_size = RF_SIZE,
+ .tx_queues = NUM_TX_QUEUES,
+ .extra_tx_headroom = TXINFO_DESC_SIZE + TXWI_DESC_SIZE_5592,
+ .rx = &rt2800usb_queue_rx_5592,
+ .tx = &rt2800usb_queue_tx_5592,
+ .bcn = &rt2800usb_queue_bcn_5592,
+ .lib = &rt2800usb_rt2x00_ops,
+ .drv = &rt2800usb_rt2800_ops,
+ .hw = &rt2800usb_mac80211_ops,
+#ifdef CONFIG_RT2X00_LIB_DEBUGFS
+ .debugfs = &rt2800_rt2x00debug,
+#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
+};
+
/*
* rt2800usb module information.
*/
@@ -1201,7 +1247,7 @@ static struct usb_device_id rt2800usb_device_table[] = {
{ USB_DEVICE(0x148f, 0x5372) },
#endif
#ifdef CONFIG_RT2800USB_RT55XX
- { USB_DEVICE(0x148f, 0x5572) },
+ { USB_DEVICE(0x148f, 0x5572), .driver_info = 5592 },
#endif
#ifdef CONFIG_RT2800USB_UNKNOWN
/*
@@ -1306,6 +1352,9 @@ MODULE_LICENSE("GPL");
static int rt2800usb_probe(struct usb_interface *usb_intf,
const struct usb_device_id *id)
{
+ if (id->driver_info == 5592)
+ return rt2x00usb_probe(usb_intf, &rt2800usb_ops_5592);
+
return rt2x00usb_probe(usb_intf, &rt2800usb_ops);
}
--
1.7.4.4
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 23/25] rt2800: 5592: add Kconfig
2013-03-16 18:19 [PATCH 0/25] rt2800: add experimental support for 5592 chip stf_xl
` (21 preceding siblings ...)
2013-03-16 18:19 ` [PATCH 22/25] rt2800: 5592: TXWI & RXWI descriptors size stf_xl
@ 2013-03-16 18:19 ` stf_xl
2013-03-16 18:19 ` [PATCH 24/25] rt2800: 5592: iq calibration for 5GHz stf_xl
` (2 subsequent siblings)
25 siblings, 0 replies; 27+ messages in thread
From: stf_xl @ 2013-03-16 18:19 UTC (permalink / raw)
To: John W. Linville"; +Cc: linux-wireless, users, Stanislaw Gruszka
From: Stanislaw Gruszka <stf_xl@wp.pl>
Enable support to 5592 chip.
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
---
drivers/net/wireless/rt2x00/Kconfig | 7 +++++++
1 files changed, 7 insertions(+), 0 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig
index 44d6ead..d195454 100644
--- a/drivers/net/wireless/rt2x00/Kconfig
+++ b/drivers/net/wireless/rt2x00/Kconfig
@@ -169,6 +169,13 @@ config RT2800USB_RT53XX
rt2800usb driver.
Supported chips: RT5370
+config RT2800USB_RT55XX
+ bool "rt2800usb - Include support for rt55xx devices (EXPERIMENTAL)"
+ ---help---
+ This adds support for rt55xx wireless chipset family to the
+ rt2800usb driver.
+ Supported chips: RT5572
+
config RT2800USB_UNKNOWN
bool "rt2800usb - Include support for unknown (USB) devices"
default n
--
1.7.4.4
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 24/25] rt2800: 5592: iq calibration for 5GHz
2013-03-16 18:19 [PATCH 0/25] rt2800: add experimental support for 5592 chip stf_xl
` (22 preceding siblings ...)
2013-03-16 18:19 ` [PATCH 23/25] rt2800: 5592: add Kconfig stf_xl
@ 2013-03-16 18:19 ` stf_xl
2013-03-16 18:19 ` [PATCH 25/25] rt2800: 5592: add more USB devices IDs stf_xl
2013-03-18 3:00 ` [PATCH 0/25] rt2800: add experimental support for 5592 chip Wanlong Gao
25 siblings, 0 replies; 27+ messages in thread
From: stf_xl @ 2013-03-16 18:19 UTC (permalink / raw)
To: John W. Linville"; +Cc: linux-wireless, users, Stanislaw Gruszka
From: Stanislaw Gruszka <stf_xl@wp.pl>
Based on:
RT5592_IQCalibration()
DPO_RT5572_LinuxSTA_2.6.1.3_20121022/cips/rt5592.c
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
---
drivers/net/wireless/rt2x00/rt2800lib.c | 70 ++++++++++++++++++++++++++----
1 files changed, 60 insertions(+), 10 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 9b1f293..f08a042 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -2468,31 +2468,80 @@ static void rt2800_bbp_write_with_rx_chain(struct rt2x00_dev *rt2x00dev,
}
}
-
static void rt2800_iq_calibrate(struct rt2x00_dev *rt2x00dev, int channel)
{
u8 cal;
- /* TODO */
- if (WARN_ON_ONCE(channel > 14))
- return;
-
+ /* TX0 IQ Gain */
rt2800_bbp_write(rt2x00dev, 158, 0x2c);
- cal = rt2x00_eeprom_byte(rt2x00dev, EEPROM_IQ_GAIN_CAL_TX0_2G);
+ if (channel <= 14)
+ cal = rt2x00_eeprom_byte(rt2x00dev, EEPROM_IQ_GAIN_CAL_TX0_2G);
+ else if (channel >= 36 && channel <= 64)
+ cal = rt2x00_eeprom_byte(rt2x00dev,
+ EEPROM_IQ_GAIN_CAL_TX0_CH36_TO_CH64_5G);
+ else if (channel >= 100 && channel <= 138)
+ cal = rt2x00_eeprom_byte(rt2x00dev,
+ EEPROM_IQ_GAIN_CAL_TX0_CH100_TO_CH138_5G);
+ else if (channel >= 140 && channel <= 165)
+ cal = rt2x00_eeprom_byte(rt2x00dev,
+ EEPROM_IQ_GAIN_CAL_TX0_CH140_TO_CH165_5G);
+ else
+ cal = 0;
rt2800_bbp_write(rt2x00dev, 159, cal);
+ /* TX0 IQ Phase */
rt2800_bbp_write(rt2x00dev, 158, 0x2d);
- cal = rt2x00_eeprom_byte(rt2x00dev, EEPROM_IQ_PHASE_CAL_TX0_2G);
+ if (channel <= 14)
+ cal = rt2x00_eeprom_byte(rt2x00dev, EEPROM_IQ_PHASE_CAL_TX0_2G);
+ else if (channel >= 36 && channel <= 64)
+ cal = rt2x00_eeprom_byte(rt2x00dev,
+ EEPROM_IQ_PHASE_CAL_TX0_CH36_TO_CH64_5G);
+ else if (channel >= 100 && channel <= 138)
+ cal = rt2x00_eeprom_byte(rt2x00dev,
+ EEPROM_IQ_PHASE_CAL_TX0_CH100_TO_CH138_5G);
+ else if (channel >= 140 && channel <= 165)
+ cal = rt2x00_eeprom_byte(rt2x00dev,
+ EEPROM_IQ_PHASE_CAL_TX0_CH140_TO_CH165_5G);
+ else
+ cal = 0;
rt2800_bbp_write(rt2x00dev, 159, cal);
+ /* TX1 IQ Gain */
rt2800_bbp_write(rt2x00dev, 158, 0x4a);
- cal = rt2x00_eeprom_byte(rt2x00dev, EEPROM_IQ_GAIN_CAL_TX1_2G);
+ if (channel <= 14)
+ cal = rt2x00_eeprom_byte(rt2x00dev, EEPROM_IQ_GAIN_CAL_TX1_2G);
+ else if (channel >= 36 && channel <= 64)
+ cal = rt2x00_eeprom_byte(rt2x00dev,
+ EEPROM_IQ_GAIN_CAL_TX1_CH36_TO_CH64_5G);
+ else if (channel >= 100 && channel <= 138)
+ cal = rt2x00_eeprom_byte(rt2x00dev,
+ EEPROM_IQ_GAIN_CAL_TX1_CH100_TO_CH138_5G);
+ else if (channel >= 140 && channel <= 165)
+ cal = rt2x00_eeprom_byte(rt2x00dev,
+ EEPROM_IQ_GAIN_CAL_TX1_CH140_TO_CH165_5G);
+ else
+ cal = 0;
rt2800_bbp_write(rt2x00dev, 159, cal);
+ /* TX1 IQ Phase */
rt2800_bbp_write(rt2x00dev, 158, 0x4b);
- cal = rt2x00_eeprom_byte(rt2x00dev, EEPROM_IQ_PHASE_CAL_TX1_2G);
+ if (channel <= 14)
+ cal = rt2x00_eeprom_byte(rt2x00dev, EEPROM_IQ_PHASE_CAL_TX1_2G);
+ else if (channel >= 36 && channel <= 64)
+ cal = rt2x00_eeprom_byte(rt2x00dev,
+ EEPROM_IQ_PHASE_CAL_TX1_CH36_TO_CH64_5G);
+ else if (channel >= 100 && channel <= 138)
+ cal = rt2x00_eeprom_byte(rt2x00dev,
+ EEPROM_IQ_PHASE_CAL_TX1_CH100_TO_CH138_5G);
+ else if (channel >= 140 && channel <= 165)
+ cal = rt2x00_eeprom_byte(rt2x00dev,
+ EEPROM_IQ_PHASE_CAL_TX1_CH140_TO_CH165_5G);
+ else
+ cal = 0;
rt2800_bbp_write(rt2x00dev, 159, cal);
+ /* FIXME: possible RX0, RX1 callibration ? */
+
/* RF IQ compensation control */
rt2800_bbp_write(rt2x00dev, 158, 0x04);
cal = rt2x00_eeprom_byte(rt2x00dev, EEPROM_RF_IQ_COMPENSATION_CONTROL);
@@ -2500,7 +2549,8 @@ static void rt2800_iq_calibrate(struct rt2x00_dev *rt2x00dev, int channel)
/* RF IQ imbalance compensation control */
rt2800_bbp_write(rt2x00dev, 158, 0x03);
- cal = rt2x00_eeprom_byte(rt2x00dev, EEPROM_RF_IQ_IMBALANCE_COMPENSATION_CONTROL);
+ cal = rt2x00_eeprom_byte(rt2x00dev,
+ EEPROM_RF_IQ_IMBALANCE_COMPENSATION_CONTROL);
rt2800_bbp_write(rt2x00dev, 159, cal != 0xff ? cal : 0);
}
--
1.7.4.4
^ permalink raw reply related [flat|nested] 27+ messages in thread
* [PATCH 25/25] rt2800: 5592: add more USB devices IDs
2013-03-16 18:19 [PATCH 0/25] rt2800: add experimental support for 5592 chip stf_xl
` (23 preceding siblings ...)
2013-03-16 18:19 ` [PATCH 24/25] rt2800: 5592: iq calibration for 5GHz stf_xl
@ 2013-03-16 18:19 ` stf_xl
2013-03-18 3:00 ` [PATCH 0/25] rt2800: add experimental support for 5592 chip Wanlong Gao
25 siblings, 0 replies; 27+ messages in thread
From: stf_xl @ 2013-03-16 18:19 UTC (permalink / raw)
To: John W. Linville"; +Cc: linux-wireless, users, Stanislaw Gruszka
From: Stanislaw Gruszka <stf_xl@wp.pl>
Reported-by: Xose Vazquez Perez <xose.vazquez@gmail.com>
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
---
drivers/net/wireless/rt2x00/rt2800usb.c | 9 +++++++++
1 files changed, 9 insertions(+), 0 deletions(-)
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index 9b1ca67..f322820 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -1247,6 +1247,15 @@ static struct usb_device_id rt2800usb_device_table[] = {
{ USB_DEVICE(0x148f, 0x5372) },
#endif
#ifdef CONFIG_RT2800USB_RT55XX
+ /* Arcadyan */
+ { USB_DEVICE(0x043e, 0x7a32), .driver_info = 5592 },
+ /* AVM GmbH */
+ { USB_DEVICE(0x057c, 0x8501), .driver_info = 5592 },
+ /* D-Link DWA-160-B2 */
+ { USB_DEVICE(0x2001, 0x3c1a), .driver_info = 5592 },
+ /* Proware */
+ { USB_DEVICE(0x043e, 0x7a13), .driver_info = 5592 },
+ /* Ralink */
{ USB_DEVICE(0x148f, 0x5572), .driver_info = 5592 },
#endif
#ifdef CONFIG_RT2800USB_UNKNOWN
--
1.7.4.4
^ permalink raw reply related [flat|nested] 27+ messages in thread
* Re: [PATCH 0/25] rt2800: add experimental support for 5592 chip
2013-03-16 18:19 [PATCH 0/25] rt2800: add experimental support for 5592 chip stf_xl
` (24 preceding siblings ...)
2013-03-16 18:19 ` [PATCH 25/25] rt2800: 5592: add more USB devices IDs stf_xl
@ 2013-03-18 3:00 ` Wanlong Gao
25 siblings, 0 replies; 27+ messages in thread
From: Wanlong Gao @ 2013-03-18 3:00 UTC (permalink / raw)
To: Stanislaw Gruszka; +Cc: Xose Vazquez Perez, linux-wireless, Wanlong Gao
>This patch set add support for 5592 a new Ralink wlan chip. Register
>programming code is all is based on Ralink linux driver available at
>(despite the url it linux driver download web page ):
>
>http://www.mediatek.com/_en/07_downloads/01_windows.php?sn=501
>
>Currently only support for USB devices is added, PCIe is on the way
>together with some other changes that will clean BBP/RF rt2800
>programming code, which is now quite Lionel (messy :-).
Thank you very much, this works well on my new RT5572 wireless device.
Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
>
> Kconfig | 7
> rt2800.h | 103 ++++++-
> rt2800lib.c | 857 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++----
> rt2800pci.c | 5
> rt2800usb.c | 63 ++++
> rt2x00.h | 10
> 6 files changed, 989 insertions(+), 56 deletions(-)
^ permalink raw reply [flat|nested] 27+ messages in thread
end of thread, other threads:[~2013-03-18 2:59 UTC | newest]
Thread overview: 27+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-03-16 18:19 [PATCH 0/25] rt2800: add experimental support for 5592 chip stf_xl
2013-03-16 18:19 ` [PATCH 01/25] rt2800: do not crash if spec->channels is NULL stf_xl
2013-03-16 18:19 ` [PATCH 02/25] rt2800: 5592: early defines stf_xl
2013-03-16 18:19 ` [PATCH 03/25] rt2800: 5592: add channels table stf_xl
2013-03-16 18:19 ` [PATCH 04/25] rt2800: 5592: channel config stub stf_xl
2013-03-16 18:19 ` [PATCH 05/25] rt2800: 5592: MAC registers initalization stf_xl
2013-03-16 18:19 ` [PATCH 06/25] rt2800: 5592: BBP registers initialization stf_xl
2013-03-16 18:19 ` [PATCH 07/25] rt2800: 5592: common BBP initialization stf_xl
2013-03-16 18:19 ` [PATCH 08/25] rt2800: 5592: RF early registers initialization stf_xl
2013-03-16 18:19 ` [PATCH 09/25] rt2800: 5592: initalize RF_R27 on older revisions stf_xl
2013-03-16 18:19 ` [PATCH 10/25] rt2800: 5592: initalize BBP_R103 register on new revisions stf_xl
2013-03-16 18:19 ` [PATCH 11/25] rt2800: 5592: initialize BBP_R138 register stf_xl
2013-03-16 18:19 ` [PATCH 12/25] rt2800: 5592: initialize RF_38/39/30 registers stf_xl
2013-03-16 18:19 ` [PATCH 13/25] rt2800: 5592: init frequency calibration stf_xl
2013-03-16 18:19 ` [PATCH 14/25] rt2800: 5592: setup LDO_CFG0 when configuring channel stf_xl
2013-03-16 18:19 ` [PATCH 15/25] rt2800: 5592: enable rf init stf_xl
2013-03-16 18:19 ` [PATCH 16/25] rt2800: 5592: more channel switch registers settings (BBP & GLRT) stf_xl
2013-03-16 18:19 ` [PATCH 17/25] rt2800: 5592: add iq calibration stf_xl
2013-03-16 18:19 ` [PATCH 18/25] rt2800: rearrange bbp/rfcsr initialization stf_xl
2013-03-16 18:19 ` [PATCH 19/25] rt2800: add write_with_rx_chain function stf_xl
2013-03-16 18:19 ` [PATCH 20/25] rt2800: 5592: add AGC init stf_xl
2013-03-16 18:19 ` [PATCH 21/25] rt2800: 5592: add chip specific vgc calculations stf_xl
2013-03-16 18:19 ` [PATCH 22/25] rt2800: 5592: TXWI & RXWI descriptors size stf_xl
2013-03-16 18:19 ` [PATCH 23/25] rt2800: 5592: add Kconfig stf_xl
2013-03-16 18:19 ` [PATCH 24/25] rt2800: 5592: iq calibration for 5GHz stf_xl
2013-03-16 18:19 ` [PATCH 25/25] rt2800: 5592: add more USB devices IDs stf_xl
2013-03-18 3:00 ` [PATCH 0/25] rt2800: add experimental support for 5592 chip Wanlong Gao
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).