From: Kalle Valo <kvalo@codeaurora.org>
To: linux-wireless@vger.kernel.org
Subject: [RFC 2/5] cisco: create new wireless vendor directory
Date: Tue, 17 Nov 2015 17:45:33 +0200 [thread overview]
Message-ID: <1447775136-21173-3-git-send-email-kvalo@codeaurora.org> (raw)
In-Reply-To: <1447775136-21173-1-git-send-email-kvalo@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
drivers/net/wireless/Kconfig | 43 +--------------------
drivers/net/wireless/Makefile | 4 +-
drivers/net/wireless/cisco/Kconfig | 56 ++++++++++++++++++++++++++++
drivers/net/wireless/cisco/Makefile | 2 +
drivers/net/wireless/{ => cisco}/airo.c | 0
drivers/net/wireless/{ => cisco}/airo.h | 0
drivers/net/wireless/{ => cisco}/airo_cs.c | 0
7 files changed, 60 insertions(+), 45 deletions(-)
create mode 100644 drivers/net/wireless/cisco/Kconfig
create mode 100644 drivers/net/wireless/cisco/Makefile
rename drivers/net/wireless/{ => cisco}/airo.c (100%)
rename drivers/net/wireless/{ => cisco}/airo.h (100%)
rename drivers/net/wireless/{ => cisco}/airo_cs.c (100%)
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index 7d8f47117c4d..ce5211ba1b29 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -18,6 +18,7 @@ menuconfig WLAN
if WLAN
source "drivers/net/wireless/admtek/Kconfig"
+source "drivers/net/wireless/cisco/Kconfig"
config PCMCIA_RAYCS
tristate "Aviator/Raytheon 2.4GHz wireless support"
@@ -53,26 +54,6 @@ config LIBERTAS_THINFIRM_USB
---help---
A driver for Marvell Libertas 8388 USB devices using thinfirm.
-config AIRO
- tristate "Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards"
- depends on CFG80211 && ISA_DMA_API && (PCI || BROKEN)
- select WIRELESS_EXT
- select CRYPTO
- select WEXT_SPY
- select WEXT_PRIV
- ---help---
- This is the standard Linux driver to support Cisco/Aironet ISA and
- PCI 802.11 wireless cards.
- It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
- - with or without encryption) as well as card before the Cisco
- acquisition (Aironet 4500, Aironet 4800, Aironet 4800B).
-
- This driver support both the standard Linux Wireless Extensions
- and Cisco proprietary API, so both the Linux Wireless Tools and the
- Cisco Linux utilities can be used to configure the card.
-
- The driver can be compiled as a module and will be named "airo".
-
config ATMEL
tristate "Atmel at76c50x chipset 802.11b support"
depends on CFG80211 && (PCI || PCMCIA)
@@ -116,28 +97,6 @@ config AT76C50X_USB
Enable support for USB Wireless devices using Atmel at76c503,
at76c505 or at76c505a chips.
-config AIRO_CS
- tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards"
- depends on CFG80211 && PCMCIA && (BROKEN || !M32R)
- select WIRELESS_EXT
- select WEXT_SPY
- select WEXT_PRIV
- select CRYPTO
- select CRYPTO_AES
- ---help---
- This is the standard Linux driver to support Cisco/Aironet PCMCIA
- 802.11 wireless cards. This driver is the same as the Aironet
- driver part of the Linux Pcmcia package.
- It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
- - with or without encryption) as well as card before the Cisco
- acquisition (Aironet 4500, Aironet 4800, Aironet 4800B). It also
- supports OEM of Cisco such as the DELL TrueMobile 4800 and Xircom
- 802.11b cards.
-
- This driver support both the standard Linux Wireless Extensions
- and Cisco proprietary API, so both the Linux Wireless Tools and the
- Cisco Linux utilities can be used to configure the card.
-
config PCMCIA_WL3501
tristate "Planet WL3501 PCMCIA cards"
depends on CFG80211 && PCMCIA
diff --git a/drivers/net/wireless/Makefile b/drivers/net/wireless/Makefile
index be215f43ec1d..853294d84fa9 100644
--- a/drivers/net/wireless/Makefile
+++ b/drivers/net/wireless/Makefile
@@ -3,15 +3,13 @@
#
obj-$(CONFIG_WLAN_VENDOR_ADMTEK) += admtek/
+obj-$(CONFIG_WLAN_VENDOR_CISCO) += cisco/
obj-$(CONFIG_IPW2100) += ipw2x00/
obj-$(CONFIG_IPW2200) += ipw2x00/
obj-$(CONFIG_HERMES) += orinoco/
-obj-$(CONFIG_AIRO) += airo.o
-obj-$(CONFIG_AIRO_CS) += airo_cs.o airo.o
-
obj-$(CONFIG_ATMEL) += atmel.o
obj-$(CONFIG_PCI_ATMEL) += atmel_pci.o
obj-$(CONFIG_PCMCIA_ATMEL) += atmel_cs.o
diff --git a/drivers/net/wireless/cisco/Kconfig b/drivers/net/wireless/cisco/Kconfig
new file mode 100644
index 000000000000..b22567dff893
--- /dev/null
+++ b/drivers/net/wireless/cisco/Kconfig
@@ -0,0 +1,56 @@
+config WLAN_VENDOR_CISCO
+ bool "Cisco devices"
+ default y
+ ---help---
+ If you have a wireless card belonging to this class, say Y.
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about cards. If you say Y, you will be asked for
+ your specific card in the following questions.
+
+if WLAN_VENDOR_CISCO
+
+config AIRO
+ tristate "Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards"
+ depends on CFG80211 && ISA_DMA_API && (PCI || BROKEN)
+ select WIRELESS_EXT
+ select CRYPTO
+ select WEXT_SPY
+ select WEXT_PRIV
+ ---help---
+ This is the standard Linux driver to support Cisco/Aironet ISA and
+ PCI 802.11 wireless cards.
+ It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
+ - with or without encryption) as well as card before the Cisco
+ acquisition (Aironet 4500, Aironet 4800, Aironet 4800B).
+
+ This driver support both the standard Linux Wireless Extensions
+ and Cisco proprietary API, so both the Linux Wireless Tools and the
+ Cisco Linux utilities can be used to configure the card.
+
+ The driver can be compiled as a module and will be named "airo".
+
+config AIRO_CS
+ tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards"
+ depends on CFG80211 && PCMCIA && (BROKEN || !M32R)
+ select WIRELESS_EXT
+ select WEXT_SPY
+ select WEXT_PRIV
+ select CRYPTO
+ select CRYPTO_AES
+ ---help---
+ This is the standard Linux driver to support Cisco/Aironet PCMCIA
+ 802.11 wireless cards. This driver is the same as the Aironet
+ driver part of the Linux Pcmcia package.
+ It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
+ - with or without encryption) as well as card before the Cisco
+ acquisition (Aironet 4500, Aironet 4800, Aironet 4800B). It also
+ supports OEM of Cisco such as the DELL TrueMobile 4800 and Xircom
+ 802.11b cards.
+
+ This driver support both the standard Linux Wireless Extensions
+ and Cisco proprietary API, so both the Linux Wireless Tools and the
+ Cisco Linux utilities can be used to configure the card.
+
+endif # WLAN_VENDOR_CISCO
diff --git a/drivers/net/wireless/cisco/Makefile b/drivers/net/wireless/cisco/Makefile
new file mode 100644
index 000000000000..d4110b19d6ef
--- /dev/null
+++ b/drivers/net/wireless/cisco/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_AIRO) += airo.o
+obj-$(CONFIG_AIRO_CS) += airo_cs.o airo.o
diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/cisco/airo.c
similarity index 100%
rename from drivers/net/wireless/airo.c
rename to drivers/net/wireless/cisco/airo.c
diff --git a/drivers/net/wireless/airo.h b/drivers/net/wireless/cisco/airo.h
similarity index 100%
rename from drivers/net/wireless/airo.h
rename to drivers/net/wireless/cisco/airo.h
diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/cisco/airo_cs.c
similarity index 100%
rename from drivers/net/wireless/airo_cs.c
rename to drivers/net/wireless/cisco/airo_cs.c
--
1.7.9.5
next prev parent reply other threads:[~2015-11-17 15:45 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-17 15:45 [RFC 0/5] wireless drivers vendor directories Kalle Valo
2015-11-17 15:45 ` [RFC 1/5] admtek: create new wireless vendor directory Kalle Valo
2015-11-17 15:45 ` Kalle Valo [this message]
2015-11-17 15:45 ` [RFC 3/5] atmel: " Kalle Valo
2015-11-17 15:45 ` [RFC 4/5] b43: move under broadcom " Kalle Valo
2015-11-17 15:45 ` [RFC 5/5] b43legacy: " Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1447775136-21173-3-git-send-email-kvalo@codeaurora.org \
--to=kvalo@codeaurora.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).