From: Kalle Valo <kvalo@codeaurora.org>
To: linux-wireless@vger.kernel.org
Subject: [RFC 3/5] atmel: create new wireless vendor directory
Date: Tue, 17 Nov 2015 17:45:34 +0200 [thread overview]
Message-ID: <1447775136-21173-4-git-send-email-kvalo@codeaurora.org> (raw)
In-Reply-To: <1447775136-21173-1-git-send-email-kvalo@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
---
MAINTAINERS | 2 +-
drivers/net/wireless/Kconfig | 44 +----------------
drivers/net/wireless/Makefile | 7 +--
drivers/net/wireless/atmel/Kconfig | 57 +++++++++++++++++++++++
drivers/net/wireless/atmel/Makefile | 5 ++
drivers/net/wireless/{ => atmel}/at76c50x-usb.c | 0
drivers/net/wireless/{ => atmel}/at76c50x-usb.h | 0
drivers/net/wireless/{ => atmel}/atmel.c | 0
drivers/net/wireless/{ => atmel}/atmel.h | 0
drivers/net/wireless/{ => atmel}/atmel_cs.c | 0
drivers/net/wireless/{ => atmel}/atmel_pci.c | 0
11 files changed, 65 insertions(+), 50 deletions(-)
create mode 100644 drivers/net/wireless/atmel/Kconfig
create mode 100644 drivers/net/wireless/atmel/Makefile
rename drivers/net/wireless/{ => atmel}/at76c50x-usb.c (100%)
rename drivers/net/wireless/{ => atmel}/at76c50x-usb.h (100%)
rename drivers/net/wireless/{ => atmel}/atmel.c (100%)
rename drivers/net/wireless/{ => atmel}/atmel.h (100%)
rename drivers/net/wireless/{ => atmel}/atmel_cs.c (100%)
rename drivers/net/wireless/{ => atmel}/atmel_pci.c (100%)
diff --git a/MAINTAINERS b/MAINTAINERS
index 436c12006773..e42fcda9ef82 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1948,7 +1948,7 @@ L: linux-wireless@vger.kernel.org
W: http://www.thekelleys.org.uk/atmel
W: http://atmelwlandriver.sourceforge.net/
S: Maintained
-F: drivers/net/wireless/atmel*
+F: drivers/net/wireless/atmel/atmel*
ATMEL MAXTOUCH DRIVER
M: Nick Dyer <nick.dyer@itdev.co.uk>
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index ce5211ba1b29..275b6ed93f15 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -18,6 +18,7 @@ menuconfig WLAN
if WLAN
source "drivers/net/wireless/admtek/Kconfig"
+source "drivers/net/wireless/atmel/Kconfig"
source "drivers/net/wireless/cisco/Kconfig"
config PCMCIA_RAYCS
@@ -54,49 +55,6 @@ config LIBERTAS_THINFIRM_USB
---help---
A driver for Marvell Libertas 8388 USB devices using thinfirm.
-config ATMEL
- tristate "Atmel at76c50x chipset 802.11b support"
- depends on CFG80211 && (PCI || PCMCIA)
- select WIRELESS_EXT
- select WEXT_PRIV
- select FW_LOADER
- select CRC32
- ---help---
- A driver 802.11b wireless cards based on the Atmel fast-vnet
- chips. This driver supports standard Linux wireless extensions.
-
- Many cards based on this chipset do not have flash memory
- and need their firmware loaded at start-up. If yours is
- one of these, you will need to provide a firmware image
- to be loaded into the card by the driver. The Atmel
- firmware package can be downloaded from
- <http://www.thekelleys.org.uk/atmel>
-
-config PCI_ATMEL
- tristate "Atmel at76c506 PCI cards"
- depends on ATMEL && PCI
- ---help---
- Enable support for PCI and mini-PCI cards containing the
- Atmel at76c506 chip.
-
-config PCMCIA_ATMEL
- tristate "Atmel at76c502/at76c504 PCMCIA cards"
- depends on ATMEL && PCMCIA
- select WIRELESS_EXT
- select FW_LOADER
- select CRC32
- ---help---
- Enable support for PCMCIA cards containing the
- Atmel at76c502 and at76c504 chips.
-
-config AT76C50X_USB
- tristate "Atmel at76c503/at76c505/at76c505a USB cards"
- depends on MAC80211 && USB
- select FW_LOADER
- ---help---
- Enable support for USB Wireless devices using Atmel at76c503,
- at76c505 or at76c505a chips.
-
config PCMCIA_WL3501
tristate "Planet WL3501 PCMCIA cards"
depends on CFG80211 && PCMCIA
diff --git a/drivers/net/wireless/Makefile b/drivers/net/wireless/Makefile
index 853294d84fa9..87eb6b2f3227 100644
--- a/drivers/net/wireless/Makefile
+++ b/drivers/net/wireless/Makefile
@@ -3,6 +3,7 @@
#
obj-$(CONFIG_WLAN_VENDOR_ADMTEK) += admtek/
+obj-$(CONFIG_WLAN_VENDOR_ATMEL) += atmel/
obj-$(CONFIG_WLAN_VENDOR_CISCO) += cisco/
obj-$(CONFIG_IPW2100) += ipw2x00/
@@ -10,12 +11,6 @@ obj-$(CONFIG_IPW2200) += ipw2x00/
obj-$(CONFIG_HERMES) += orinoco/
-obj-$(CONFIG_ATMEL) += atmel.o
-obj-$(CONFIG_PCI_ATMEL) += atmel_pci.o
-obj-$(CONFIG_PCMCIA_ATMEL) += atmel_cs.o
-
-obj-$(CONFIG_AT76C50X_USB) += at76c50x-usb.o
-
obj-$(CONFIG_PRISM54) += prism54/
obj-$(CONFIG_HOSTAP) += hostap/
diff --git a/drivers/net/wireless/atmel/Kconfig b/drivers/net/wireless/atmel/Kconfig
new file mode 100644
index 000000000000..a43cfd163254
--- /dev/null
+++ b/drivers/net/wireless/atmel/Kconfig
@@ -0,0 +1,57 @@
+config WLAN_VENDOR_ATMEL
+ bool "Atmel devices"
+ default y
+ ---help---
+ If you have a wireless card belonging to this class, say Y.
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about cards. If you say Y, you will be asked for
+ your specific card in the following questions.
+
+if WLAN_VENDOR_ATMEL
+
+config ATMEL
+ tristate "Atmel at76c50x chipset 802.11b support"
+ depends on CFG80211 && (PCI || PCMCIA)
+ select WIRELESS_EXT
+ select WEXT_PRIV
+ select FW_LOADER
+ select CRC32
+ ---help---
+ A driver 802.11b wireless cards based on the Atmel fast-vnet
+ chips. This driver supports standard Linux wireless extensions.
+
+ Many cards based on this chipset do not have flash memory
+ and need their firmware loaded at start-up. If yours is
+ one of these, you will need to provide a firmware image
+ to be loaded into the card by the driver. The Atmel
+ firmware package can be downloaded from
+ <http://www.thekelleys.org.uk/atmel>
+
+config PCI_ATMEL
+ tristate "Atmel at76c506 PCI cards"
+ depends on ATMEL && PCI
+ ---help---
+ Enable support for PCI and mini-PCI cards containing the
+ Atmel at76c506 chip.
+
+config PCMCIA_ATMEL
+ tristate "Atmel at76c502/at76c504 PCMCIA cards"
+ depends on ATMEL && PCMCIA
+ select WIRELESS_EXT
+ select FW_LOADER
+ select CRC32
+ ---help---
+ Enable support for PCMCIA cards containing the
+ Atmel at76c502 and at76c504 chips.
+
+config AT76C50X_USB
+ tristate "Atmel at76c503/at76c505/at76c505a USB cards"
+ depends on MAC80211 && USB
+ select FW_LOADER
+ ---help---
+ Enable support for USB Wireless devices using Atmel at76c503,
+ at76c505 or at76c505a chips.
+
+endif # WLAN_VENDOR_ATMEL
diff --git a/drivers/net/wireless/atmel/Makefile b/drivers/net/wireless/atmel/Makefile
new file mode 100644
index 000000000000..e62e345f7af6
--- /dev/null
+++ b/drivers/net/wireless/atmel/Makefile
@@ -0,0 +1,5 @@
+obj-$(CONFIG_ATMEL) += atmel.o
+obj-$(CONFIG_PCI_ATMEL) += atmel_pci.o
+obj-$(CONFIG_PCMCIA_ATMEL) += atmel_cs.o
+
+obj-$(CONFIG_AT76C50X_USB) += at76c50x-usb.o
diff --git a/drivers/net/wireless/at76c50x-usb.c b/drivers/net/wireless/atmel/at76c50x-usb.c
similarity index 100%
rename from drivers/net/wireless/at76c50x-usb.c
rename to drivers/net/wireless/atmel/at76c50x-usb.c
diff --git a/drivers/net/wireless/at76c50x-usb.h b/drivers/net/wireless/atmel/at76c50x-usb.h
similarity index 100%
rename from drivers/net/wireless/at76c50x-usb.h
rename to drivers/net/wireless/atmel/at76c50x-usb.h
diff --git a/drivers/net/wireless/atmel.c b/drivers/net/wireless/atmel/atmel.c
similarity index 100%
rename from drivers/net/wireless/atmel.c
rename to drivers/net/wireless/atmel/atmel.c
diff --git a/drivers/net/wireless/atmel.h b/drivers/net/wireless/atmel/atmel.h
similarity index 100%
rename from drivers/net/wireless/atmel.h
rename to drivers/net/wireless/atmel/atmel.h
diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel/atmel_cs.c
similarity index 100%
rename from drivers/net/wireless/atmel_cs.c
rename to drivers/net/wireless/atmel/atmel_cs.c
diff --git a/drivers/net/wireless/atmel_pci.c b/drivers/net/wireless/atmel/atmel_pci.c
similarity index 100%
rename from drivers/net/wireless/atmel_pci.c
rename to drivers/net/wireless/atmel/atmel_pci.c
--
1.7.9.5
next prev parent reply other threads:[~2015-11-17 15:45 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-17 15:45 [RFC 0/5] wireless drivers vendor directories Kalle Valo
2015-11-17 15:45 ` [RFC 1/5] admtek: create new wireless vendor directory Kalle Valo
2015-11-17 15:45 ` [RFC 2/5] cisco: " Kalle Valo
2015-11-17 15:45 ` Kalle Valo [this message]
2015-11-17 15:45 ` [RFC 4/5] b43: move under broadcom " Kalle Valo
2015-11-17 15:45 ` [RFC 5/5] b43legacy: " Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1447775136-21173-4-git-send-email-kvalo@codeaurora.org \
--to=kvalo@codeaurora.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).