[PATCH] ath10k: Enhance logging for vdev pdev & peer set param

[PATCH] ath10k: Enhance logging for vdev pdev & peer set param

[Rakesh Pillai]

Currently after enabling the WMI debug logging,
there is no detail printed about the param id
and the param value for the pdev, vdev and
peer params which are set.

Enhance the WMI logging to print the param id
and the param value for pdev, vdev and peer set
param wmi commands.

Tested HW: WCN3990
Tested FW: WLAN.HL.2.0-01387-QCAHLSWMTPLZ-1
		WLAN.HL.3.1-00784-QCAHLSWMTPLZ-1

Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
---
 drivers/net/wireless/ath/ath10k/wmi-tlv.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
index 90617e1..98d8992 100644
--- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c
+++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c
@@ -1576,7 +1576,8 @@ ath10k_wmi_tlv_op_gen_pdev_set_param(struct ath10k *ar, u32 param_id,
 	cmd->param_id = __cpu_to_le32(param_id);
 	cmd->param_value = __cpu_to_le32(param_value);
 
-	ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi tlv pdev set param\n");
+	ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi tlv pdev set param %d value 0x%x\n",
+		   param_id, param_value);
 	return skb;
 }
 
@@ -2046,7 +2047,8 @@ ath10k_wmi_tlv_op_gen_vdev_set_param(struct ath10k *ar, u32 vdev_id,
 	cmd->param_id = __cpu_to_le32(param_id);
 	cmd->param_value = __cpu_to_le32(param_value);
 
-	ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi tlv vdev set param\n");
+	ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi tlv vdev %d set param %d value 0x%x\n",
+		   vdev_id, param_id, param_value);
 	return skb;
 }
 
@@ -2360,7 +2362,9 @@ ath10k_wmi_tlv_op_gen_peer_set_param(struct ath10k *ar, u32 vdev_id,
 	cmd->param_value = __cpu_to_le32(param_value);
 	ether_addr_copy(cmd->peer_macaddr.addr, peer_addr);
 
-	ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi tlv peer set param\n");
+	ath10k_dbg(ar, ATH10K_DBG_WMI,
+		   "wmi tlv vdev %d peer %pM set param %d value 0x%x\n",
+		   vdev_id, peer_addr, param_id, param_value);
 	return skb;
 }
 
-- 
2.7.4

Re: [PATCH] ath10k: Enhance logging for vdev pdev & peer set param

[Kalle Valo]

Rakesh Pillai <pillair@codeaurora.org> wrote:

> Currently after enabling the WMI debug logging,
> there is no detail printed about the param id
> and the param value for the pdev, vdev and
> peer params which are set.
> 
> Enhance the WMI logging to print the param id
> and the param value for pdev, vdev and peer set
> param wmi commands.
> 
> Tested HW: WCN3990
> Tested FW: WLAN.HL.2.0-01387-QCAHLSWMTPLZ-1
> 		WLAN.HL.3.1-00784-QCAHLSWMTPLZ-1
> 
> Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

Patch applied to ath-next branch of ath.git, thanks.

1c136e41fb77 ath10k: enhance logging for vdev pdev & peer set param

-- 
https://patchwork.kernel.org/patch/10814285/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches