Linux-Wireless Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH 00/11] wil6210 patches
@ 2019-06-16  7:25 Maya Erez
  2019-06-16  7:25 ` [PATCH 01/11] wil6210: do not reset FW in STA to P2P client interface switch Maya Erez
                   ` (10 more replies)
  0 siblings, 11 replies; 13+ messages in thread
From: Maya Erez @ 2019-06-16  7:25 UTC (permalink / raw)
  To: Kalle Valo; +Cc: Maya Erez, linux-wireless, wil6210

The following set of patces include multiple wil6210 bug fixes.

Ahmad Masri (4):
  wil6210: enlarge Tx status ring size
  wil6210: increase the frequency of status ring hw tail update
  wil6210: set WIL_WMI_CALL_GENERAL_TO_MS as wmi_call timeout
  wil6210: drop old event after wmi_call timeout

Alexei Avshalom Lazar (3):
  wil6210: do not reset FW in STA to P2P client interface switch
  wil6210: Add support for setting RBUFCAP configuration
  wil6210: update cid boundary check of wil_find_cid/_by_idx()

Dedy Lansky (1):
  wil6210: fix printout in wil_read_pmccfg

Maya Erez (2):
  wil6210: clear FW and ucode log address
  wil6210: publish max_msdu_size to FW on BCAST ring

Tzahi Sabo (1):
  wil6210: add support for reading multiple RFs temperature via debugfs

 drivers/net/wireless/ath/wil6210/cfg80211.c   |  22 ++++-
 drivers/net/wireless/ath/wil6210/debugfs.c    |  88 +++++++++++++++---
 drivers/net/wireless/ath/wil6210/main.c       |  19 +++-
 drivers/net/wireless/ath/wil6210/pcie_bus.c   |   1 +
 drivers/net/wireless/ath/wil6210/rx_reorder.c |  31 +++----
 drivers/net/wireless/ath/wil6210/txrx.c       |   9 +-
 drivers/net/wireless/ath/wil6210/txrx_edma.c  |  16 +++-
 drivers/net/wireless/ath/wil6210/txrx_edma.h  |   2 +-
 drivers/net/wireless/ath/wil6210/wil6210.h    |   6 ++
 drivers/net/wireless/ath/wil6210/wmi.c        | 127 ++++++++++++++++++++++----
 drivers/net/wireless/ath/wil6210/wmi.h        |  47 ++++++++--
 11 files changed, 297 insertions(+), 71 deletions(-)

-- 
1.9.1


^ permalink raw reply	[flat|nested] 13+ messages in thread

end of thread, back to index

Thread overview: 13+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-06-16  7:25 [PATCH 00/11] wil6210 patches Maya Erez
2019-06-16  7:25 ` [PATCH 01/11] wil6210: do not reset FW in STA to P2P client interface switch Maya Erez
2019-06-27 17:51   ` Kalle Valo
2019-06-16  7:25 ` [PATCH 02/11] wil6210: enlarge Tx status ring size Maya Erez
2019-06-16  7:25 ` [PATCH 03/11] wil6210: increase the frequency of status ring hw tail update Maya Erez
2019-06-16  7:26 ` [PATCH 04/11] wil6210: Add support for setting RBUFCAP configuration Maya Erez
2019-06-16  7:26 ` [PATCH 05/11] wil6210: fix printout in wil_read_pmccfg Maya Erez
2019-06-16  7:26 ` [PATCH 06/11] wil6210: clear FW and ucode log address Maya Erez
2019-06-16  7:26 ` [PATCH 07/11] wil6210: update cid boundary check of wil_find_cid/_by_idx() Maya Erez
2019-06-16  7:26 ` [PATCH 08/11] wil6210: publish max_msdu_size to FW on BCAST ring Maya Erez
2019-06-16  7:26 ` [PATCH 09/11] wil6210: add support for reading multiple RFs temperature via debugfs Maya Erez
2019-06-16  7:26 ` [PATCH 10/11] wil6210: set WIL_WMI_CALL_GENERAL_TO_MS as wmi_call timeout Maya Erez
2019-06-16  7:26 ` [PATCH 11/11] wil6210: drop old event after " Maya Erez

Linux-Wireless Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-wireless/0 linux-wireless/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-wireless linux-wireless/ https://lore.kernel.org/linux-wireless \
		linux-wireless@vger.kernel.org
	public-inbox-index linux-wireless

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-wireless


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git