[PATCH v4 0/2] Add support for new channels on 60GHz band

[PATCH v4 0/2] Add support for new channels on 60GHz band

[Alexei Avshalom Lazar]

The following set of patches add support for new channels on
60GHz band and EDMG channels:
Changelog:
V4:
- Addressed to comments from the community
- Updated comments and variable name
V3:
- Addressed to comments from the community
- Added 60G check for verifying some EDMG cases are relevant
- Used the ieee80211_sta_edmg_cap struct as the edmg channel configuration
- Updated nla_policy to NLA_POLICY_RANGE()
V2
- Addressed to comments from the community
- Align to latest Spec release

Alexei Avshalom Lazar (2):
  nl80211: Add support for EDMG channels
  wil6210: Add EDMG channel support

 drivers/net/wireless/ath/wil6210/cfg80211.c  | 205 +++++++++++++++++++++++++--
 drivers/net/wireless/ath/wil6210/txrx_edma.c |   2 +
 drivers/net/wireless/ath/wil6210/txrx_edma.h |   6 +
 drivers/net/wireless/ath/wil6210/wil6210.h   |   8 +-
 drivers/net/wireless/ath/wil6210/wmi.c       |   5 +-
 drivers/net/wireless/ath/wil6210/wmi.h       |  30 +++-
 include/net/cfg80211.h                       |  37 ++++-
 include/uapi/linux/nl80211.h                 |  22 +++
 net/wireless/chan.c                          | 158 ++++++++++++++++++++-
 net/wireless/nl80211.c                       |  35 +++++
 net/wireless/util.c                          |  42 +++++-
 11 files changed, 530 insertions(+), 20 deletions(-)

-- 
1.9.1

[PATCH v4 1/2] nl80211: Add support for EDMG channels

[Alexei Avshalom Lazar]

802.11ay specification defines Enhanced Directional Multi-Gigabit
(EDMG) STA and AP which allow channel bonding of 2 channels and more.
Introduce NL80211_ATTR_WIPHY_EDMG_CHANNELS,
NL80211_ATTR_WIPHY_EDMG_BW_CONFIG, NL80211_BAND_ATTR_EDMG_CHANNELS,
NL80211_BAND_ATTR_EDMG_BW_CONFIG and RATE_INFO_FLAGS_EDMG
that needed for enabling and configuring EDMG support.
Driver is expected to report its EDMG capabilities: whether EDMG
is supported and the supported EDMG channels.
Bitrate calculation is enhanced to take into account EDMG support
according to the 802.11ay specification.
The kernel uses NL80211_BAND_ATTR_EDMG_CHANNELS and
NL80211_BAND_ATTR_EDMG_BW_CONFIG attributes in order to publish
the EDMG capabilities to the userspace.
NL80211_BAND_ATTR_EDMG_CHANNELS is a bitmap field that indicates
the 2.16 GHz channel(s) that are allowed to be used.
If NL80211_BAND_ATTR_EDMG_CHANNELS is not set then EDMG not
supported. NL80211_BAND_ATTR_EDMG_BW_CONFIG represent the allowed
channel bandwidth configurations.
NL80211_ATTR_WIPHY_EDMG_CHANNELS and NL80211_ATTR_WIPHY_EDMG_BW_CONFIG
will be used by the userspace for AP configuration and connect command.
---
 drivers/net/wireless/ath/wil6210/cfg80211.c |   2 +-
 include/net/cfg80211.h                      |  37 ++++++-
 include/uapi/linux/nl80211.h                |  22 ++++
 net/wireless/chan.c                         | 158 +++++++++++++++++++++++++++-
 net/wireless/nl80211.c                      |  35 ++++++
 net/wireless/util.c                         |  42 +++++++-
 6 files changed, 289 insertions(+), 7 deletions(-)

diff --git a/drivers/net/wireless/ath/wil6210/cfg80211.c b/drivers/net/wireless/ath/wil6210/cfg80211.c
index a1e226652..ce68fbc 100644
--- a/drivers/net/wireless/ath/wil6210/cfg80211.c
+++ b/drivers/net/wireless/ath/wil6210/cfg80211.c
@@ -346,7 +346,7 @@ int wil_cid_fill_sinfo(struct wil6210_vif *vif, int cid,
 			BIT_ULL(NL80211_STA_INFO_RX_DROP_MISC) |
 			BIT_ULL(NL80211_STA_INFO_TX_FAILED);
 
-	sinfo->txrate.flags = RATE_INFO_FLAGS_60G;
+	sinfo->txrate.flags = RATE_INFO_FLAGS_DMG;
 	sinfo->txrate.mcs = le16_to_cpu(reply.evt.bf_mcs);
 	sinfo->rxrate.mcs = stats->last_mcs_rx;
 	sinfo->rx_bytes = stats->rx_bytes;
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 117691f..98f663e 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -321,6 +321,24 @@ struct ieee80211_sband_iftype_data {
 };
 
 /**
+ * struct ieee80211_edmg - EDMG configuration
+ *
+ * This structure describes most essential parameters needed
+ * to describe 802.11ay EDMG configuration
+ *
+ * @channels: bitmap that indicates the 2.16 GHz channel(s)
+ *	that are allowed to be used for transmissions.
+ *	Bit 0 indicates channel 1, bit 1 indicates channel 2, etc.
+ *	Set to 0 indicate EDMG not supported.
+ * @bw_config: Channel BW Configuration subfield encodes
+ *	the allowed channel bandwidth configurations
+ */
+struct ieee80211_edmg {
+	u8 channels;
+	u8 bw_config;
+};
+
+/**
  * struct ieee80211_supported_band - frequency band definition
  *
  * This structure describes a frequency band a wiphy
@@ -336,6 +354,7 @@ struct ieee80211_sband_iftype_data {
  * @n_bitrates: Number of bitrates in @bitrates
  * @ht_cap: HT capabilities in this band
  * @vht_cap: VHT capabilities in this band
+ * @edmg_cap: EDMG capabilities in this band
  * @n_iftype_data: number of iftype data entries
  * @iftype_data: interface type data entries.  Note that the bits in
  *	@types_mask inside this structure cannot overlap (i.e. only
@@ -350,6 +369,7 @@ struct ieee80211_supported_band {
 	int n_bitrates;
 	struct ieee80211_sta_ht_cap ht_cap;
 	struct ieee80211_sta_vht_cap vht_cap;
+	struct ieee80211_edmg edmg_cap;
 	u16 n_iftype_data;
 	const struct ieee80211_sband_iftype_data *iftype_data;
 };
@@ -503,12 +523,17 @@ struct key_params {
  * @center_freq1: center frequency of first segment
  * @center_freq2: center frequency of second segment
  *	(only with 80+80 MHz)
+ * @edmg: define the EDMG channels configuration.
+ *	If edmg is requested (i.e. the .channels member is non-zero),
+ *	chan will define the primary channel and all other
+ *	parameters are ignored.
  */
 struct cfg80211_chan_def {
 	struct ieee80211_channel *chan;
 	enum nl80211_chan_width width;
 	u32 center_freq1;
 	u32 center_freq2;
+	struct ieee80211_edmg edmg;
 };
 
 /**
@@ -1144,15 +1169,17 @@ int cfg80211_check_station_change(struct wiphy *wiphy,
  * @RATE_INFO_FLAGS_MCS: mcs field filled with HT MCS
  * @RATE_INFO_FLAGS_VHT_MCS: mcs field filled with VHT MCS
  * @RATE_INFO_FLAGS_SHORT_GI: 400ns guard interval
- * @RATE_INFO_FLAGS_60G: 60GHz MCS
+ * @RATE_INFO_FLAGS_DMG: 60GHz MCS
  * @RATE_INFO_FLAGS_HE_MCS: HE MCS information
+ * @RATE_INFO_FLAGS_EDMG: 60GHz MCS in EDMG mode
  */
 enum rate_info_flags {
 	RATE_INFO_FLAGS_MCS			= BIT(0),
 	RATE_INFO_FLAGS_VHT_MCS			= BIT(1),
 	RATE_INFO_FLAGS_SHORT_GI		= BIT(2),
-	RATE_INFO_FLAGS_60G			= BIT(3),
+	RATE_INFO_FLAGS_DMG			= BIT(3),
 	RATE_INFO_FLAGS_HE_MCS			= BIT(4),
+	RATE_INFO_FLAGS_EDMG			= BIT(5),
 };
 
 /**
@@ -1192,6 +1219,7 @@ enum rate_info_bw {
  * @he_dcm: HE DCM value
  * @he_ru_alloc: HE RU allocation (from &enum nl80211_he_ru_alloc,
  *	only valid if bw is %RATE_INFO_BW_HE_RU)
+ * @n_bonded_ch: In case of EDMG the number of bonded channels (1-4)
  */
 struct rate_info {
 	u8 flags;
@@ -1202,6 +1230,7 @@ struct rate_info {
 	u8 he_gi;
 	u8 he_dcm;
 	u8 he_ru_alloc;
+	u8 n_bonded_ch;
 };
 
 /**
@@ -2403,6 +2432,9 @@ struct cfg80211_bss_selection {
  * @fils_erp_rrk_len: Length of @fils_erp_rrk in octets.
  * @want_1x: indicates user-space supports and wants to use 802.1X driver
  *	offload of 4-way handshake.
+ * @edmg: define the EDMG channels.
+ *	This may specify multiple channels and bonding options for the driver
+ *	to choose from, based on BSS configuration.
  */
 struct cfg80211_connect_params {
 	struct ieee80211_channel *channel;
@@ -2436,6 +2468,7 @@ struct cfg80211_connect_params {
 	const u8 *fils_erp_rrk;
 	size_t fils_erp_rrk_len;
 	bool want_1x;
+	struct ieee80211_edmg edmg;
 };
 
 /**
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index 25f70dd..106381c 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -52,6 +52,9 @@
 #define NL80211_MULTICAST_GROUP_NAN		"nan"
 #define NL80211_MULTICAST_GROUP_TESTMODE	"testmode"
 
+#define NL80211_EDMG_BW_CONFIG_MIN	4
+#define NL80211_EDMG_BW_CONFIG_MAX	15
+
 /**
  * DOC: Station handling
  *
@@ -2324,6 +2327,13 @@ enum nl80211_commands {
  *	should be picking up the lowest tx power, either tx power per-interface
  *	or per-station.
  *
+ * @NL80211_ATTR_WIPHY_EDMG_CHANNELS: bitmap that indicates the 2.16 GHz
+ *	channel(s) that are allowed to be used for EDMG transmissions.
+ *	Defined by IEEE P802.11ay/D4.0 section 9.4.2.251.
+ * @NL80211_ATTR_WIPHY_EDMG_BW_CONFIG: Channel BW Configuration subfield encodes
+ *	the allowed channel bandwidth configurations.
+ *	Defined by IEEE P802.11ay/D4.0 section 9.4.2.251, Table 13.
+ *
  * @NUM_NL80211_ATTR: total number of nl80211_attrs available
  * @NL80211_ATTR_MAX: highest attribute number currently defined
  * @__NL80211_ATTR_AFTER_LAST: internal use
@@ -2777,6 +2787,9 @@ enum nl80211_attrs {
 	NL80211_ATTR_STA_TX_POWER_SETTING,
 	NL80211_ATTR_STA_TX_POWER,
 
+	NL80211_ATTR_WIPHY_EDMG_CHANNELS,
+	NL80211_ATTR_WIPHY_EDMG_BW_CONFIG,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
@@ -3385,6 +3398,12 @@ enum nl80211_band_iftype_attr {
  * @NL80211_BAND_ATTR_VHT_CAPA: VHT capabilities, as in the HT information IE
  * @NL80211_BAND_ATTR_IFTYPE_DATA: nested array attribute, with each entry using
  *	attributes from &enum nl80211_band_iftype_attr
+ * @NL80211_BAND_ATTR_EDMG_CHANNELS: bitmap that indicates the 2.16 GHz
+ *	channel(s) that are allowed to be used for EDMG transmissions.
+ *	Defined by IEEE P802.11ay/D4.0 section 9.4.2.251.
+ * @NL80211_BAND_ATTR_EDMG_BW_CONFIG: Channel BW Configuration subfield encodes
+ *	the allowed channel bandwidth configurations.
+ *	Defined by IEEE P802.11ay/D4.0 section 9.4.2.251, Table 13.
  * @NL80211_BAND_ATTR_MAX: highest band attribute currently defined
  * @__NL80211_BAND_ATTR_AFTER_LAST: internal use
  */
@@ -3402,6 +3421,9 @@ enum nl80211_band_attr {
 	NL80211_BAND_ATTR_VHT_CAPA,
 	NL80211_BAND_ATTR_IFTYPE_DATA,
 
+	NL80211_BAND_ATTR_EDMG_CHANNELS,
+	NL80211_BAND_ATTR_EDMG_BW_CONFIG,
+
 	/* keep last */
 	__NL80211_BAND_ATTR_AFTER_LAST,
 	NL80211_BAND_ATTR_MAX = __NL80211_BAND_ATTR_AFTER_LAST - 1
diff --git a/net/wireless/chan.c b/net/wireless/chan.c
index 7dc1bbd..0e6d3c3 100644
--- a/net/wireless/chan.c
+++ b/net/wireless/chan.c
@@ -14,6 +14,11 @@
 #include "core.h"
 #include "rdev-ops.h"
 
+static bool cfg80211_valid_60g_freq(u32 freq)
+{
+	return (freq >= 58320 && freq <= 70200);
+}
+
 void cfg80211_chandef_create(struct cfg80211_chan_def *chandef,
 			     struct ieee80211_channel *chan,
 			     enum nl80211_channel_type chan_type)
@@ -23,6 +28,8 @@ void cfg80211_chandef_create(struct cfg80211_chan_def *chandef,
 
 	chandef->chan = chan;
 	chandef->center_freq2 = 0;
+	chandef->edmg.bw_config = 0;
+	chandef->edmg.channels = 0;
 
 	switch (chan_type) {
 	case NL80211_CHAN_NO_HT:
@@ -47,6 +54,93 @@ void cfg80211_chandef_create(struct cfg80211_chan_def *chandef,
 }
 EXPORT_SYMBOL(cfg80211_chandef_create);
 
+static bool cfg80211_edmg_chandef_valid(const struct cfg80211_chan_def *chandef)
+{
+	int max_contiguous = 0;
+	int num_of_enabled = 0;
+	int contiguous = 0;
+	int i;
+
+	if (!chandef->edmg.channels && !chandef->edmg.bw_config)
+		return true;
+
+	if ((!chandef->edmg.channels && chandef->edmg.bw_config) ||
+	    (chandef->edmg.channels && !chandef->edmg.bw_config) ||
+	    !cfg80211_valid_60g_freq(chandef->chan->center_freq))
+		return false;
+
+	for (i = 0; i < 6; i++) {
+		if (chandef->edmg.channels & BIT(i)) {
+			contiguous++;
+			num_of_enabled++;
+		} else {
+			contiguous = 0;
+		}
+
+		max_contiguous = max(contiguous, max_contiguous);
+	}
+	/* basic verification of edmg configuration according to
+	 * IEEE P802.11ay/D4.0 section 9.4.2.251
+	 */
+	/* check bw_config against contiguous edmg channels */
+	switch (chandef->edmg.bw_config) {
+	case 4:
+	case 8:
+	case 12:
+		if (max_contiguous < 1)
+			return false;
+		break;
+	case 5:
+	case 9:
+	case 13:
+		if (max_contiguous < 2)
+			return false;
+		break;
+	case 6:
+	case 10:
+	case 14:
+		if (max_contiguous < 3)
+			return false;
+		break;
+	case 7:
+	case 11:
+	case 15:
+		if (max_contiguous < 4)
+			return false;
+		break;
+
+	default:
+		return false;
+	}
+
+	/* check bw_config against aggregated (non contiguous) edmg channels */
+	switch (chandef->edmg.bw_config) {
+	case 4:
+	case 5:
+	case 6:
+	case 7:
+		break;
+	case 8:
+	case 9:
+	case 10:
+	case 11:
+		if (num_of_enabled < 2)
+			return false;
+		break;
+	case 12:
+	case 13:
+	case 14:
+	case 15:
+		if (num_of_enabled < 4 || max_contiguous < 2)
+			return false;
+		break;
+	default:
+		return false;
+	}
+
+	return true;
+}
+
 bool cfg80211_chandef_valid(const struct cfg80211_chan_def *chandef)
 {
 	u32 control_freq;
@@ -112,7 +206,7 @@ bool cfg80211_chandef_valid(const struct cfg80211_chan_def *chandef)
 		return false;
 	}
 
-	return true;
+	return cfg80211_edmg_chandef_valid(chandef);
 }
 EXPORT_SYMBOL(cfg80211_chandef_valid);
 
@@ -721,12 +815,65 @@ static bool cfg80211_secondary_chans_ok(struct wiphy *wiphy,
 	return true;
 }
 
+/* check if the operating channels are valid and supported */
+static bool cfg80211_edmg_usable(struct wiphy *wiphy, u8 edmg_channels,
+				 u8 edmg_bw_config, int primary_channel,
+				 struct ieee80211_edmg *edmg_cap)
+{
+	struct ieee80211_channel *chan;
+	int i, freq;
+	int channels_counter = 0;
+
+	if (!edmg_channels && !edmg_bw_config)
+		return true;
+
+	if ((!edmg_channels && edmg_bw_config) ||
+	    (edmg_channels && !edmg_bw_config))
+		return false;
+
+	if (!(edmg_channels & BIT(primary_channel - 1)))
+		return false;
+
+	/* 60GHz channels 1..6 */
+	for (i = 0; i < 6; i++) {
+		if (!(edmg_channels & BIT(i)))
+			continue;
+
+		if (!(edmg_cap->channels & BIT(i)))
+			return false;
+
+		channels_counter++;
+
+		freq = ieee80211_channel_to_frequency(i + 1,
+						      NL80211_BAND_60GHZ);
+		chan = ieee80211_get_channel(wiphy, freq);
+		if (!chan || chan->flags & IEEE80211_CHAN_DISABLED)
+			return false;
+	}
+
+	/* IEEE802.11 allows max 4 channels */
+	if (channels_counter > 4)
+		return false;
+
+	/* check bw_config is a subset of what driver supports
+	 * (see IEEE P802.11ay/D4.0 section 9.4.2.251, Table 13)
+	 */
+	if ((edmg_bw_config % 4) > (edmg_cap->bw_config % 4))
+		return false;
+
+	if (edmg_bw_config > edmg_cap->bw_config)
+		return false;
+
+	return true;
+}
+
 bool cfg80211_chandef_usable(struct wiphy *wiphy,
 			     const struct cfg80211_chan_def *chandef,
 			     u32 prohibited_flags)
 {
 	struct ieee80211_sta_ht_cap *ht_cap;
 	struct ieee80211_sta_vht_cap *vht_cap;
+	struct ieee80211_edmg *edmg_cap;
 	u32 width, control_freq, cap;
 
 	if (WARN_ON(!cfg80211_chandef_valid(chandef)))
@@ -734,6 +881,15 @@ bool cfg80211_chandef_usable(struct wiphy *wiphy,
 
 	ht_cap = &wiphy->bands[chandef->chan->band]->ht_cap;
 	vht_cap = &wiphy->bands[chandef->chan->band]->vht_cap;
+	edmg_cap = &wiphy->bands[chandef->chan->band]->edmg_cap;
+
+	if (edmg_cap->channels &&
+	    !cfg80211_edmg_usable(wiphy,
+				  chandef->edmg.channels,
+				  chandef->edmg.bw_config,
+				  chandef->chan->hw_value,
+				  edmg_cap))
+		return false;
 
 	control_freq = chandef->chan->center_freq;
 
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index da3843a..ce6dc73 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -288,6 +288,11 @@ static int validate_ie_attr(const struct nlattr *attr,
 
 	[NL80211_ATTR_WIPHY_FREQ] = { .type = NLA_U32 },
 	[NL80211_ATTR_WIPHY_CHANNEL_TYPE] = { .type = NLA_U32 },
+	[NL80211_ATTR_WIPHY_EDMG_CHANNELS] = { .type = NLA_U8 },
+	[NL80211_ATTR_WIPHY_EDMG_BW_CONFIG] = NLA_POLICY_RANGE(NLA_U8,
+						NL80211_EDMG_BW_CONFIG_MIN,
+						NL80211_EDMG_BW_CONFIG_MAX),
+
 	[NL80211_ATTR_CHANNEL_WIDTH] = { .type = NLA_U32 },
 	[NL80211_ATTR_CENTER_FREQ1] = { .type = NLA_U32 },
 	[NL80211_ATTR_CENTER_FREQ2] = { .type = NLA_U32 },
@@ -1501,6 +1506,15 @@ static int nl80211_send_band_rateinfo(struct sk_buff *msg,
 		nla_nest_end(msg, nl_iftype_data);
 	}
 
+	/* add EDMG info */
+	if (sband->edmg_cap.channels &&
+	    (nla_put_u8(msg, NL80211_BAND_ATTR_EDMG_CHANNELS,
+		       sband->edmg_cap.channels) ||
+	    nla_put_u8(msg, NL80211_BAND_ATTR_EDMG_BW_CONFIG,
+		       sband->edmg_cap.bw_config)))
+
+		return -ENOBUFS;
+
 	/* add bitrates */
 	nl_rates = nla_nest_start(msg, NL80211_BAND_ATTR_RATES);
 	if (!nl_rates)
@@ -2560,6 +2574,18 @@ int nl80211_parse_chandef(struct cfg80211_registered_device *rdev,
 				nla_get_u32(attrs[NL80211_ATTR_CENTER_FREQ2]);
 	}
 
+	if (info->attrs[NL80211_ATTR_WIPHY_EDMG_CHANNELS]) {
+		chandef->edmg.channels =
+		      nla_get_u8(info->attrs[NL80211_ATTR_WIPHY_EDMG_CHANNELS]);
+
+		if (info->attrs[NL80211_ATTR_WIPHY_EDMG_BW_CONFIG])
+			chandef->edmg.bw_config =
+		     nla_get_u8(info->attrs[NL80211_ATTR_WIPHY_EDMG_BW_CONFIG]);
+	} else {
+		chandef->edmg.bw_config = 0;
+		chandef->edmg.channels = 0;
+	}
+
 	if (!cfg80211_chandef_valid(chandef)) {
 		NL_SET_ERR_MSG(extack, "invalid channel definition");
 		return -EINVAL;
@@ -9699,6 +9725,15 @@ static int nl80211_connect(struct sk_buff *skb, struct genl_info *info)
 			return -EINVAL;
 	}
 
+	if (info->attrs[NL80211_ATTR_WIPHY_EDMG_CHANNELS]) {
+		connect.edmg.channels =
+		      nla_get_u8(info->attrs[NL80211_ATTR_WIPHY_EDMG_CHANNELS]);
+
+		if (info->attrs[NL80211_ATTR_WIPHY_EDMG_BW_CONFIG])
+			connect.edmg.bw_config =
+		     nla_get_u8(info->attrs[NL80211_ATTR_WIPHY_EDMG_BW_CONFIG]);
+	}
+
 	if (connect.privacy && info->attrs[NL80211_ATTR_KEYS]) {
 		connkeys = nl80211_parse_connkeys(rdev, info, NULL);
 		if (IS_ERR(connkeys))
diff --git a/net/wireless/util.c b/net/wireless/util.c
index cf63b63..7d06dd6 100644
--- a/net/wireless/util.c
+++ b/net/wireless/util.c
@@ -1034,7 +1034,7 @@ static u32 cfg80211_calculate_bitrate_ht(struct rate_info *rate)
 	return (bitrate + 50000) / 100000;
 }
 
-static u32 cfg80211_calculate_bitrate_60g(struct rate_info *rate)
+static u32 cfg80211_calculate_bitrate_dmg(struct rate_info *rate)
 {
 	static const u32 __mcs2bitrate[] = {
 		/* control PHY */
@@ -1081,6 +1081,40 @@ static u32 cfg80211_calculate_bitrate_60g(struct rate_info *rate)
 	return __mcs2bitrate[rate->mcs];
 }
 
+static u32 cfg80211_calculate_bitrate_edmg(struct rate_info *rate)
+{
+	static const u32 __mcs2bitrate[] = {
+		/* control PHY */
+		[0] =   275,
+		/* SC PHY */
+		[1] =  3850,
+		[2] =  7700,
+		[3] =  9625,
+		[4] = 11550,
+		[5] = 12512, /* 1251.25 mbps */
+		[6] = 13475,
+		[7] = 15400,
+		[8] = 19250,
+		[9] = 23100,
+		[10] = 25025,
+		[11] = 26950,
+		[12] = 30800,
+		[13] = 38500,
+		[14] = 46200,
+		[15] = 50050,
+		[16] = 53900,
+		[17] = 57750,
+		[18] = 69300,
+		[19] = 75075,
+		[20] = 80850,
+	};
+
+	if (WARN_ON_ONCE(rate->mcs >= ARRAY_SIZE(__mcs2bitrate)))
+		return 0;
+
+	return __mcs2bitrate[rate->mcs] * rate->n_bonded_ch;
+}
+
 static u32 cfg80211_calculate_bitrate_vht(struct rate_info *rate)
 {
 	static const u32 base[4][10] = {
@@ -1253,8 +1287,10 @@ u32 cfg80211_calculate_bitrate(struct rate_info *rate)
 {
 	if (rate->flags & RATE_INFO_FLAGS_MCS)
 		return cfg80211_calculate_bitrate_ht(rate);
-	if (rate->flags & RATE_INFO_FLAGS_60G)
-		return cfg80211_calculate_bitrate_60g(rate);
+	if (rate->flags & RATE_INFO_FLAGS_DMG)
+		return cfg80211_calculate_bitrate_dmg(rate);
+	if (rate->flags & RATE_INFO_FLAGS_EDMG)
+		return cfg80211_calculate_bitrate_edmg(rate);
 	if (rate->flags & RATE_INFO_FLAGS_VHT_MCS)
 		return cfg80211_calculate_bitrate_vht(rate);
 	if (rate->flags & RATE_INFO_FLAGS_HE_MCS)
-- 
1.9.1

[PATCH v4 2/2] wil6210: Add EDMG channel support

[Alexei Avshalom Lazar]

Add support for Enhanced Directional Multi-Gigabit (EDMG) channels 9-11.
wil6210 reports it's EDMG capabilities (that are also based on FW
capability) to cfg80211 by filling
wiphy->bands[NL80211_BAND_60GHZ]->edmg_cap.
wil6210 handles edmg.channels and edmg.bw_config requested in connect
and start_ap operations.
---
 drivers/net/wireless/ath/wil6210/cfg80211.c  | 205 +++++++++++++++++++++++++--
 drivers/net/wireless/ath/wil6210/txrx_edma.c |   2 +
 drivers/net/wireless/ath/wil6210/txrx_edma.h |   6 +
 drivers/net/wireless/ath/wil6210/wil6210.h   |   8 +-
 drivers/net/wireless/ath/wil6210/wmi.c       |   5 +-
 drivers/net/wireless/ath/wil6210/wmi.h       |  30 +++-
 6 files changed, 242 insertions(+), 14 deletions(-)

diff --git a/drivers/net/wireless/ath/wil6210/cfg80211.c b/drivers/net/wireless/ath/wil6210/cfg80211.c
index ce68fbc..a68f148 100644
--- a/drivers/net/wireless/ath/wil6210/cfg80211.c
+++ b/drivers/net/wireless/ath/wil6210/cfg80211.c
@@ -25,6 +25,22 @@
 
 #define WIL_MAX_ROC_DURATION_MS 5000
 
+#define WIL_EDMG_CHANNEL_9_SUBCHANNELS	(BIT(0) | BIT(1))
+#define WIL_EDMG_CHANNEL_10_SUBCHANNELS	(BIT(1) | BIT(2))
+#define WIL_EDMG_CHANNEL_11_SUBCHANNELS	(BIT(2) | BIT(3))
+
+/* WIL_EDMG_BW_CONFIGURATION define the allowed channel bandwidth
+ * configurations as defined by IEEE 802.11 section 9.4.2.251, Table 13.
+ * The value 5 allowing CB1 and CB2 of adjacent channels.
+ */
+#define WIL_EDMG_BW_CONFIGURATION 5
+
+/* WIL_EDMG_CHANNELS is a bitmap that indicates the 2.16 GHz channel(s) that
+ * are allowed to be used for EDMG transmissions in the BSS as defined by
+ * IEEE 802.11 section 9.4.2.251.
+ */
+#define WIL_EDMG_CHANNELS (BIT(0) | BIT(1) | BIT(2) | BIT(3))
+
 bool disable_ap_sme;
 module_param(disable_ap_sme, bool, 0444);
 MODULE_PARM_DESC(disable_ap_sme, " let user space handle AP mode SME");
@@ -51,6 +67,39 @@
 	CHAN60G(4, 0),
 };
 
+/* Rx channel bonding mode */
+enum wil_rx_cb_mode {
+	WIL_RX_CB_MODE_DMG,
+	WIL_RX_CB_MODE_EDMG,
+	WIL_RX_CB_MODE_WIDE,
+};
+
+static int wil_rx_cb_mode_to_n_bonded(u8 cb_mode)
+{
+	switch (cb_mode) {
+	case WIL_RX_CB_MODE_DMG:
+	case WIL_RX_CB_MODE_EDMG:
+		return 1;
+	case WIL_RX_CB_MODE_WIDE:
+		return 2;
+	default:
+		return 1;
+	}
+}
+
+static int wil_tx_cb_mode_to_n_bonded(u8 cb_mode)
+{
+	switch (cb_mode) {
+	case WMI_TX_MODE_DMG:
+	case WMI_TX_MODE_EDMG_CB1:
+		return 1;
+	case WMI_TX_MODE_EDMG_CB2:
+		return 2;
+	default:
+		return 1;
+	}
+}
+
 static void
 wil_memdup_ie(u8 **pdst, size_t *pdst_len, const u8 *src, size_t src_len)
 {
@@ -82,6 +131,12 @@ void update_supported_bands(struct wil6210_priv *wil)
 
 	wiphy->bands[NL80211_BAND_60GHZ]->n_channels =
 						wil_num_supported_channels(wil);
+
+	if (test_bit(WMI_FW_CAPABILITY_CHANNEL_BONDING, wil->fw_capabilities))
+		wiphy->bands[NL80211_BAND_60GHZ]->edmg_cap.channels =
+							WIL_EDMG_CHANNELS;
+		wiphy->bands[NL80211_BAND_60GHZ]->edmg_cap.bw_config =
+						      WIL_EDMG_BW_CONFIGURATION;
 }
 
 /* Vendor id to be used in vendor specific command and events
@@ -296,6 +351,86 @@ int wil_iftype_nl2wmi(enum nl80211_iftype type)
 	return -EOPNOTSUPP;
 }
 
+int wil_spec2wmi_ch(u8 spec_ch, u8 *wmi_ch)
+{
+	switch (spec_ch) {
+	case 1:
+		*wmi_ch = WMI_CHANNEL_1;
+		break;
+	case 2:
+		*wmi_ch = WMI_CHANNEL_2;
+		break;
+	case 3:
+		*wmi_ch = WMI_CHANNEL_3;
+		break;
+	case 4:
+		*wmi_ch = WMI_CHANNEL_4;
+		break;
+	case 5:
+		*wmi_ch = WMI_CHANNEL_5;
+		break;
+	case 6:
+		*wmi_ch = WMI_CHANNEL_6;
+		break;
+	case 9:
+		*wmi_ch = WMI_CHANNEL_9;
+		break;
+	case 10:
+		*wmi_ch = WMI_CHANNEL_10;
+		break;
+	case 11:
+		*wmi_ch = WMI_CHANNEL_11;
+		break;
+	case 12:
+		*wmi_ch = WMI_CHANNEL_12;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+int wil_wmi2spec_ch(u8 wmi_ch, u8 *spec_ch)
+{
+	switch (wmi_ch) {
+	case WMI_CHANNEL_1:
+		*spec_ch = 1;
+		break;
+	case WMI_CHANNEL_2:
+		*spec_ch = 2;
+		break;
+	case WMI_CHANNEL_3:
+		*spec_ch = 3;
+		break;
+	case WMI_CHANNEL_4:
+		*spec_ch = 4;
+		break;
+	case WMI_CHANNEL_5:
+		*spec_ch = 5;
+		break;
+	case WMI_CHANNEL_6:
+		*spec_ch = 6;
+		break;
+	case WMI_CHANNEL_9:
+		*spec_ch = 9;
+		break;
+	case WMI_CHANNEL_10:
+		*spec_ch = 10;
+		break;
+	case WMI_CHANNEL_11:
+		*spec_ch = 11;
+		break;
+	case WMI_CHANNEL_12:
+		*spec_ch = 12;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
 int wil_cid_fill_sinfo(struct wil6210_vif *vif, int cid,
 		       struct station_info *sinfo)
 {
@@ -310,6 +445,7 @@ int wil_cid_fill_sinfo(struct wil6210_vif *vif, int cid,
 	} __packed reply;
 	struct wil_net_stats *stats = &wil->sta[cid].stats;
 	int rc;
+	u8 txflag = RATE_INFO_FLAGS_DMG;
 
 	memset(&reply, 0, sizeof(reply));
 
@@ -322,7 +458,8 @@ int wil_cid_fill_sinfo(struct wil6210_vif *vif, int cid,
 		    "  MCS %d TSF 0x%016llx\n"
 		    "  BF status 0x%08x RSSI %d SQI %d%%\n"
 		    "  Tx Tpt %d goodput %d Rx goodput %d\n"
-		    "  Sectors(rx:tx) my %d:%d peer %d:%d\n""}\n",
+		    "  Sectors(rx:tx) my %d:%d peer %d:%d\n"
+		    "  Tx mode %d}\n",
 		    cid, vif->mid, le16_to_cpu(reply.evt.bf_mcs),
 		    le64_to_cpu(reply.evt.tsf), reply.evt.status,
 		    reply.evt.rssi,
@@ -333,7 +470,8 @@ int wil_cid_fill_sinfo(struct wil6210_vif *vif, int cid,
 		    le16_to_cpu(reply.evt.my_rx_sector),
 		    le16_to_cpu(reply.evt.my_tx_sector),
 		    le16_to_cpu(reply.evt.other_rx_sector),
-		    le16_to_cpu(reply.evt.other_tx_sector));
+		    le16_to_cpu(reply.evt.other_tx_sector),
+		    reply.evt.tx_mode);
 
 	sinfo->generation = wil->sinfo_gen;
 
@@ -346,9 +484,16 @@ int wil_cid_fill_sinfo(struct wil6210_vif *vif, int cid,
 			BIT_ULL(NL80211_STA_INFO_RX_DROP_MISC) |
 			BIT_ULL(NL80211_STA_INFO_TX_FAILED);
 
-	sinfo->txrate.flags = RATE_INFO_FLAGS_DMG;
+	if (wil->use_enhanced_dma_hw && reply.evt.tx_mode != WMI_TX_MODE_DMG)
+		txflag = RATE_INFO_FLAGS_EDMG;
+
+	sinfo->txrate.flags = txflag;
 	sinfo->txrate.mcs = le16_to_cpu(reply.evt.bf_mcs);
 	sinfo->rxrate.mcs = stats->last_mcs_rx;
+	sinfo->txrate.n_bonded_ch =
+				  wil_tx_cb_mode_to_n_bonded(reply.evt.tx_mode);
+	sinfo->rxrate.n_bonded_ch =
+			     wil_rx_cb_mode_to_n_bonded(stats->last_cb_mode_rx);
 	sinfo->rx_bytes = stats->rx_bytes;
 	sinfo->rx_packets = stats->rx_packets;
 	sinfo->rx_dropped_misc = stats->rx_dropped;
@@ -1006,6 +1151,33 @@ static int wil_ft_connect(struct wiphy *wiphy,
 	return rc;
 }
 
+static int wil_get_wmi_edmg_channel(struct wil6210_priv *wil, u8 edmg_bw_config,
+				    u8 edmg_channels, u8 *wmi_ch)
+{
+	if (!edmg_bw_config) {
+		*wmi_ch = 0;
+		return 0;
+	} else if (edmg_bw_config == WIL_EDMG_BW_CONFIGURATION) {
+		/* convert from edmg channel bitmap into edmg channel number */
+		switch (edmg_channels) {
+		case WIL_EDMG_CHANNEL_9_SUBCHANNELS:
+			return wil_spec2wmi_ch(9, wmi_ch);
+		case WIL_EDMG_CHANNEL_10_SUBCHANNELS:
+			return wil_spec2wmi_ch(10, wmi_ch);
+		case WIL_EDMG_CHANNEL_11_SUBCHANNELS:
+			return wil_spec2wmi_ch(11, wmi_ch);
+		default:
+			wil_err(wil, "Unsupported edmg channel bitmap 0x%x\n",
+				edmg_channels);
+			return -EINVAL;
+		}
+	} else {
+		wil_err(wil, "Unsupported EDMG BW configuration %d\n",
+			edmg_bw_config);
+		return -EINVAL;
+	}
+}
+
 static int wil_cfg80211_connect(struct wiphy *wiphy,
 				struct net_device *ndev,
 				struct cfg80211_connect_params *sme)
@@ -1151,6 +1323,11 @@ static int wil_cfg80211_connect(struct wiphy *wiphy,
 	memcpy(conn.ssid, ssid_eid+2, conn.ssid_len);
 	conn.channel = ch - 1;
 
+	rc = wil_get_wmi_edmg_channel(wil, sme->edmg.bw_config,
+				      sme->edmg.channels, &conn.edmg_channel);
+	if (rc < 0)
+		return rc;
+
 	ether_addr_copy(conn.bssid, bss->bssid);
 	ether_addr_copy(conn.dst_mac, bss->bssid);
 
@@ -1707,7 +1884,7 @@ static int _wil_cfg80211_set_ies(struct wil6210_vif *vif,
 static int _wil_cfg80211_start_ap(struct wiphy *wiphy,
 				  struct net_device *ndev,
 				  const u8 *ssid, size_t ssid_len, u32 privacy,
-				  int bi, u8 chan,
+				  int bi, u8 chan, u8 wmi_edmg_channel,
 				  struct cfg80211_beacon_data *bcon,
 				  u8 hidden_ssid, u32 pbss)
 {
@@ -1770,6 +1947,7 @@ static int _wil_cfg80211_start_ap(struct wiphy *wiphy,
 
 	vif->privacy = privacy;
 	vif->channel = chan;
+	vif->wmi_edmg_channel = wmi_edmg_channel;
 	vif->hidden_ssid = hidden_ssid;
 	vif->pbss = pbss;
 	vif->bi = bi;
@@ -1780,7 +1958,8 @@ static int _wil_cfg80211_start_ap(struct wiphy *wiphy,
 	if (!wil_has_other_active_ifaces(wil, ndev, false, true))
 		wil6210_bus_request(wil, WIL_MAX_BUS_REQUEST_KBPS);
 
-	rc = wmi_pcp_start(vif, bi, wmi_nettype, chan, hidden_ssid, is_go);
+	rc = wmi_pcp_start(vif, bi, wmi_nettype, chan, wmi_edmg_channel,
+			   hidden_ssid, is_go);
 	if (rc)
 		goto err_pcp_start;
 
@@ -1832,7 +2011,8 @@ void wil_cfg80211_ap_recovery(struct wil6210_priv *wil)
 		rc = _wil_cfg80211_start_ap(wiphy, ndev,
 					    vif->ssid, vif->ssid_len,
 					    vif->privacy, vif->bi,
-					    vif->channel, &bcon,
+					    vif->channel,
+					    vif->wmi_edmg_channel, &bcon,
 					    vif->hidden_ssid, vif->pbss);
 		if (rc) {
 			wil_err(wil, "vif %d recovery failed (%d)\n", i, rc);
@@ -1882,7 +2062,8 @@ static int wil_cfg80211_change_beacon(struct wiphy *wiphy,
 		rc = _wil_cfg80211_start_ap(wiphy, ndev, vif->ssid,
 					    vif->ssid_len, privacy,
 					    wdev->beacon_interval,
-					    vif->channel, bcon,
+					    vif->channel,
+					    vif->wmi_edmg_channel, bcon,
 					    vif->hidden_ssid,
 					    vif->pbss);
 	} else {
@@ -1901,10 +2082,17 @@ static int wil_cfg80211_start_ap(struct wiphy *wiphy,
 	struct ieee80211_channel *channel = info->chandef.chan;
 	struct cfg80211_beacon_data *bcon = &info->beacon;
 	struct cfg80211_crypto_settings *crypto = &info->crypto;
+	u8 wmi_edmg_channel;
 	u8 hidden_ssid;
 
 	wil_dbg_misc(wil, "start_ap\n");
 
+	rc = wil_get_wmi_edmg_channel(wil, info->chandef.edmg.bw_config,
+				      info->chandef.edmg.channels,
+				      &wmi_edmg_channel);
+	if (rc < 0)
+		return rc;
+
 	if (!channel) {
 		wil_err(wil, "AP: No channel???\n");
 		return -EINVAL;
@@ -1944,7 +2132,8 @@ static int wil_cfg80211_start_ap(struct wiphy *wiphy,
 	rc = _wil_cfg80211_start_ap(wiphy, ndev,
 				    info->ssid, info->ssid_len, info->privacy,
 				    info->beacon_interval, channel->hw_value,
-				    bcon, hidden_ssid, info->pbss);
+				    wmi_edmg_channel, bcon, hidden_ssid,
+				    info->pbss);
 
 	return rc;
 }
diff --git a/drivers/net/wireless/ath/wil6210/txrx_edma.c b/drivers/net/wireless/ath/wil6210/txrx_edma.c
index c387738..0c9bb2c 100644
--- a/drivers/net/wireless/ath/wil6210/txrx_edma.c
+++ b/drivers/net/wireless/ath/wil6210/txrx_edma.c
@@ -1006,6 +1006,8 @@ static struct sk_buff *wil_sring_reap_rx_edma(struct wil6210_priv *wil,
 			stats->rx_per_mcs[stats->last_mcs_rx]++;
 	}
 
+	stats->last_cb_mode_rx  = wil_rx_status_get_cb_mode(msg);
+
 	if (!wil->use_rx_hw_reordering && !wil->use_compressed_rx_status &&
 	    wil_check_bar(wil, msg, cid, skb, stats) == -EAGAIN) {
 		kfree_skb(skb);
diff --git a/drivers/net/wireless/ath/wil6210/txrx_edma.h b/drivers/net/wireless/ath/wil6210/txrx_edma.h
index 343516a..2680ffc 100644
--- a/drivers/net/wireless/ath/wil6210/txrx_edma.h
+++ b/drivers/net/wireless/ath/wil6210/txrx_edma.h
@@ -366,6 +366,12 @@ static inline u8 wil_rx_status_get_mcs(void *msg)
 			    16, 21);
 }
 
+static inline u8 wil_rx_status_get_cb_mode(void *msg)
+{
+	return WIL_GET_BITS(((struct wil_rx_status_compressed *)msg)->d1,
+			    22, 23);
+}
+
 static inline u16 wil_rx_status_get_flow_id(void *msg)
 {
 	return WIL_GET_BITS(((struct wil_rx_status_compressed *)msg)->d0,
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index e1b1039b..d32c0bf 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -590,6 +590,7 @@ struct wil_net_stats {
 	unsigned long	rx_amsdu_error; /* eDMA specific */
 	unsigned long	rx_csum_err;
 	u16 last_mcs_rx;
+	u8 last_cb_mode_rx;
 	u64 rx_per_mcs[WIL_MCS_MAX + 1];
 	u32 ft_roams; /* relevant in STA mode */
 };
@@ -851,6 +852,7 @@ struct wil6210_vif {
 	DECLARE_BITMAP(status, wil_vif_status_last);
 	u32 privacy; /* secure connection? */
 	u16 channel; /* relevant in AP mode */
+	u8 wmi_edmg_channel; /* relevant in AP mode */
 	u8 hidden_ssid; /* relevant in AP mode */
 	u32 ap_isolate; /* no intra-BSS communication */
 	bool pbss;
@@ -1313,7 +1315,7 @@ int wil_cid_fill_sinfo(struct wil6210_vif *vif, int cid,
 
 int wmi_set_mac_address(struct wil6210_priv *wil, void *addr);
 int wmi_pcp_start(struct wil6210_vif *vif, int bi, u8 wmi_nettype, u8 chan,
-		  u8 hidden_ssid, u8 is_go);
+		  u8 edmg_chan, u8 hidden_ssid, u8 is_go);
 int wmi_pcp_stop(struct wil6210_vif *vif);
 int wmi_led_cfg(struct wil6210_priv *wil, bool enable);
 int wmi_abort_scan(struct wil6210_vif *vif);
@@ -1389,6 +1391,10 @@ int wmi_start_sched_scan(struct wil6210_priv *wil,
 int wmi_mgmt_tx_ext(struct wil6210_vif *vif, const u8 *buf, size_t len,
 		    u8 channel, u16 duration_ms);
 
+int wil_wmi2spec_ch(u8 wmi_ch, u8 *spec_ch);
+int wil_spec2wmi_ch(u8 spec_ch, u8 *wmi_ch);
+void wil_update_supported_bands(struct wil6210_priv *wil);
+
 int reverse_memcmp(const void *cs, const void *ct, size_t count);
 
 /* WMI for enhanced DMA */
diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c
index bda4a97..fe8530d 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.c
+++ b/drivers/net/wireless/ath/wil6210/wmi.c
@@ -2123,8 +2123,8 @@ int wmi_led_cfg(struct wil6210_priv *wil, bool enable)
 	return rc;
 }
 
-int wmi_pcp_start(struct wil6210_vif *vif,
-		  int bi, u8 wmi_nettype, u8 chan, u8 hidden_ssid, u8 is_go)
+int wmi_pcp_start(struct wil6210_vif *vif, int bi, u8 wmi_nettype,
+		  u8 chan, u8 wmi_edmg_chan, u8 hidden_ssid, u8 is_go)
 {
 	struct wil6210_priv *wil = vif_to_wil(vif);
 	int rc;
@@ -2134,6 +2134,7 @@ int wmi_pcp_start(struct wil6210_vif *vif,
 		.network_type = wmi_nettype,
 		.disable_sec_offload = 1,
 		.channel = chan - 1,
+		.edmg_channel = wmi_edmg_chan,
 		.pcp_max_assoc_sta = max_assoc_sta,
 		.hidden_ssid = hidden_ssid,
 		.is_go = is_go,
diff --git a/drivers/net/wireless/ath/wil6210/wmi.h b/drivers/net/wireless/ath/wil6210/wmi.h
index b668758..1b39aeb 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.h
+++ b/drivers/net/wireless/ath/wil6210/wmi.h
@@ -95,6 +95,7 @@ enum wmi_fw_capability {
 	WMI_FW_CAPABILITY_SET_SILENT_RSSI_TABLE		= 13,
 	WMI_FW_CAPABILITY_LO_POWER_CALIB_FROM_OTP	= 14,
 	WMI_FW_CAPABILITY_PNO				= 15,
+	WMI_FW_CAPABILITY_CHANNEL_BONDING		= 17,
 	WMI_FW_CAPABILITY_REF_CLOCK_CONTROL		= 18,
 	WMI_FW_CAPABILITY_AP_SME_OFFLOAD_NONE		= 19,
 	WMI_FW_CAPABILITY_MULTI_VIFS			= 20,
@@ -355,6 +356,19 @@ enum wmi_connect_ctrl_flag_bits {
 
 #define WMI_MAX_SSID_LEN	(32)
 
+enum wmi_channel {
+	WMI_CHANNEL_1	= 0x00,
+	WMI_CHANNEL_2	= 0x01,
+	WMI_CHANNEL_3	= 0x02,
+	WMI_CHANNEL_4	= 0x03,
+	WMI_CHANNEL_5	= 0x04,
+	WMI_CHANNEL_6	= 0x05,
+	WMI_CHANNEL_9	= 0x06,
+	WMI_CHANNEL_10	= 0x07,
+	WMI_CHANNEL_11	= 0x08,
+	WMI_CHANNEL_12	= 0x09,
+};
+
 /* WMI_CONNECT_CMDID */
 struct wmi_connect_cmd {
 	u8 network_type;
@@ -366,8 +380,12 @@ struct wmi_connect_cmd {
 	u8 group_crypto_len;
 	u8 ssid_len;
 	u8 ssid[WMI_MAX_SSID_LEN];
+	/* enum wmi_channel WMI_CHANNEL_1..WMI_CHANNEL_6; for EDMG this is
+	 * the primary channel number
+	 */
 	u8 channel;
-	u8 reserved0;
+	/* enum wmi_channel WMI_CHANNEL_9..WMI_CHANNEL_12 */
+	u8 edmg_channel;
 	u8 bssid[WMI_MAC_LEN];
 	__le32 ctrl_flags;
 	u8 dst_mac[WMI_MAC_LEN];
@@ -2267,7 +2285,9 @@ struct wmi_notify_req_done_event {
 	__le32 status;
 	__le64 tsf;
 	s8 rssi;
-	u8 reserved0[3];
+	/* enum wmi_edmg_tx_mode */
+	u8 tx_mode;
+	u8 reserved0[2];
 	__le32 tx_tpt;
 	__le32 tx_goodput;
 	__le32 rx_goodput;
@@ -2283,8 +2303,12 @@ struct wmi_notify_req_done_event {
 
 /* WMI_CONNECT_EVENTID */
 struct wmi_connect_event {
+	/* enum wmi_channel WMI_CHANNEL_1..WMI_CHANNEL_6; for EDMG this is
+	 * the primary channel number
+	 */
 	u8 channel;
-	u8 reserved0;
+	/* enum wmi_channel WMI_CHANNEL_9..WMI_CHANNEL_12 */
+	u8 edmg_channel;
 	u8 bssid[WMI_MAC_LEN];
 	__le16 listen_interval;
 	__le16 beacon_interval;
-- 
1.9.1

Re: [PATCH v4 1/2] nl80211: Add support for EDMG channels

[Johannes Berg]

On Sun, 2019-07-07 at 17:12 +0300, Alexei Avshalom Lazar wrote:
> 
>  /**
> + * struct ieee80211_edmg - EDMG configuration
> + *
> + * This structure describes most essential parameters needed
> + * to describe 802.11ay EDMG configuration
> + *
> + * @channels: bitmap that indicates the 2.16 GHz channel(s)
> + *	that are allowed to be used for transmissions.
> + *	Bit 0 indicates channel 1, bit 1 indicates channel 2, etc.
> + *	Set to 0 indicate EDMG not supported.
> + * @bw_config: Channel BW Configuration subfield encodes
> + *	the allowed channel bandwidth configurations
> + */
> +struct ieee80211_edmg {
> +	u8 channels;
> +	u8 bw_config;
> +};

So I think the enum here like I just said might be good. I don't know
what to really the values in it, but having something that says "yes
this is just a magic number from the spec" would be nice...

Maybe also call it "struct ieee80211_edmg_chan" or something? Not sure,
it's sort of covering both chan and cfg, so probably what you have is
better.

> @@ -350,6 +369,7 @@ struct ieee80211_supported_band {
>  	int n_bitrates;
>  	struct ieee80211_sta_ht_cap ht_cap;
>  	struct ieee80211_sta_vht_cap vht_cap;
> +	struct ieee80211_edmg edmg_cap;

Yeah, I think if you have edmg_cap as the variable name, your naming is
better :)

> + * @edmg: define the EDMG channels.
> + *	This may specify multiple channels and bonding options for the driver
> + *	to choose from, based on BSS configuration.

Here actually I don't understand how you'd specify *multiple* bonding
options? The bw_config is an enum, right?

Or maybe this case should actually *not* be the same struct, but a
different struct with a *bitmap* of the enum values?

But then it'd need a u16 anyway since the enum values go higher, up to
16 according to your code below:

> +#define NL80211_EDMG_BW_CONFIG_MIN	4
> +#define NL80211_EDMG_BW_CONFIG_MAX	15

> +static bool cfg80211_valid_60g_freq(u32 freq)
> +{
> +	return (freq >= 58320 && freq <= 70200);

nit: no need for the parentheses

> +static bool cfg80211_edmg_chandef_valid(const struct cfg80211_chan_def *chandef)
> +{
> +	int max_contiguous = 0;
> +	int num_of_enabled = 0;
> +	int contiguous = 0;
> +	int i;
> +
> +	if (!chandef->edmg.channels && !chandef->edmg.bw_config)
> +		return true;
> +
> +	if ((!chandef->edmg.channels && chandef->edmg.bw_config) ||
> +	    (chandef->edmg.channels && !chandef->edmg.bw_config) ||
> +	    !cfg80211_valid_60g_freq(chandef->chan->center_freq))
> +		return false;

That's a bit hard to read, maybe pull out the valid_60g_freq into a
separate if statement?

And after the "!channels && !bw_config" part, you don't actually need
the whole condition that way, you just need

	if (!channels || !bw_config)
		return false;

since both cannot be unset at this point.

> @@ -112,7 +206,7 @@ bool cfg80211_chandef_valid(const struct cfg80211_chan_def *chandef)
>  		return false;
>  	}
>  
> -	return true;
> +	return cfg80211_edmg_chandef_valid(chandef);


I *think* I might prefer the "could this be an EDMG channel" condition
to be outside, i.e.

	if ((chandef->edmg.channels || chandef->edmg.bw_config) &&
	    !cfg80211_edmg_chandef_valid(chandef))
		return false;

	return true;


That's clearly equivalent to what you have now, but I think it's easier
to understand that we only enter the "edmg_chandef_valid()" when it
looks like an EDMG channel and we thus need to validate it.

I'd even go as far as saying that we should have an inline for it in
cfg80211.h:

static inline bool cfg80211_chandef_is_edmg(...)
{
	return chandef->edmg.channels || chandef->edmg.bw_config;
}

and we use that in the code I wrote above, as well as other places that
want to ask this question.


> +	[NL80211_ATTR_WIPHY_EDMG_CHANNELS] = { .type = NLA_U8 },

Since you say there are only 6 channels, this probably also has a lower
bound of 1 (need to set at least one bit) and an upper bound of 63 (all
lower 6 bits set)?

In any case, thanks for your work on this, and especially for your
patience with me reviewing.

johannes

Re: [PATCH v4 1/2] nl80211: Add support for EDMG channels

[Alexei Lazar]

On 2019-07-12 11:35, Johannes Berg wrote:
> On Sun, 2019-07-07 at 17:12 +0300, Alexei Avshalom Lazar wrote:
>> 
>>  /**
>> + * struct ieee80211_edmg - EDMG configuration
>> + *
>> + * This structure describes most essential parameters needed
>> + * to describe 802.11ay EDMG configuration
>> + *
>> + * @channels: bitmap that indicates the 2.16 GHz channel(s)
>> + *	that are allowed to be used for transmissions.
>> + *	Bit 0 indicates channel 1, bit 1 indicates channel 2, etc.
>> + *	Set to 0 indicate EDMG not supported.
>> + * @bw_config: Channel BW Configuration subfield encodes
>> + *	the allowed channel bandwidth configurations
>> + */
>> +struct ieee80211_edmg {
>> +	u8 channels;
>> +	u8 bw_config;
>> +};
> 
> So I think the enum here like I just said might be good. I don't know
> what to really the values in it, but having something that says "yes
> this is just a magic number from the spec" would be nice...

You are right, enum make more sense than hardcoded values, in addition
the description will help with the better understanding of the values.

> 
> Maybe also call it "struct ieee80211_edmg_chan" or something? Not sure,
> it's sort of covering both chan and cfg, so probably what you have is
> better.
> 
>> @@ -350,6 +369,7 @@ struct ieee80211_supported_band {
>>  	int n_bitrates;
>>  	struct ieee80211_sta_ht_cap ht_cap;
>>  	struct ieee80211_sta_vht_cap vht_cap;
>> +	struct ieee80211_edmg edmg_cap;
> 
> Yeah, I think if you have edmg_cap as the variable name, your naming is
> better :)
> 
>> + * @edmg: define the EDMG channels.
>> + *	This may specify multiple channels and bonding options for the 
>> driver
>> + *	to choose from, based on BSS configuration.
> 
> Here actually I don't understand how you'd specify *multiple* bonding
> options? The bw_config is an enum, right?
> 
> Or maybe this case should actually *not* be the same struct, but a
> different struct with a *bitmap* of the enum values?
> 
> But then it'd need a u16 anyway since the enum values go higher, up to
> 16 according to your code below:

In EDMG userspace can request connect with a configuration
(channels) that represents more than 1 option, as an outcome of AP
operating EDMG channels.
For example: Let's say userspace sees in the scan result that the AP
operating on CB3 (ChannelBonding X 3):
channels = 0x7 (channels 1,2,3)
bw_config = 6 (allow CB1, CB2 or CB3)
primary = 2
userspace then sends connection request with the same values
(assuming STA support this configuration).
The AP will decide the connection details, it can decide to operate
on CB2 (channels 1+2 or channels 2+3) or CB3 (channels 1+2+3).

Other option for this same scan result, but when the STA supports up to
CB2 (doesn't support CB3), userspace sends different connection request:
channels = 0x7 (channels 1,2,3)
bw_config = 5 (allow CB1 or CB2)
Again we have more than one option for connection but limited for 
bonding
up to 2 channels.

The general idea here is that the AP can choose what is the optimal
connection configuration for each STA, if 2 STA's able to connect on
CB2:
channels = 0x7 (channels 1,2,3)
bw_config = 5 (support CB1 or CB2)
The AP can choose to connect to one STA on CB2 channels 1+2 and to the
second STA with CB2 channels 2+3.

> 
>> +#define NL80211_EDMG_BW_CONFIG_MIN	4
>> +#define NL80211_EDMG_BW_CONFIG_MAX	15
> 
>> +static bool cfg80211_valid_60g_freq(u32 freq)
>> +{
>> +	return (freq >= 58320 && freq <= 70200);
> 
> nit: no need for the parentheses

Done.

> 
>> +static bool cfg80211_edmg_chandef_valid(const struct 
>> cfg80211_chan_def *chandef)
>> +{
>> +	int max_contiguous = 0;
>> +	int num_of_enabled = 0;
>> +	int contiguous = 0;
>> +	int i;
>> +
>> +	if (!chandef->edmg.channels && !chandef->edmg.bw_config)
>> +		return true;
>> +
>> +	if ((!chandef->edmg.channels && chandef->edmg.bw_config) ||
>> +	    (chandef->edmg.channels && !chandef->edmg.bw_config) ||
>> +	    !cfg80211_valid_60g_freq(chandef->chan->center_freq))
>> +		return false;
> 
> That's a bit hard to read, maybe pull out the valid_60g_freq into a
> separate if statement?
> 
> And after the "!channels && !bw_config" part, you don't actually need
> the whole condition that way, you just need
> 
> 	if (!channels || !bw_config)
> 		return false;
> 
> since both cannot be unset at this point.

Done.

> 
>> @@ -112,7 +206,7 @@ bool cfg80211_chandef_valid(const struct 
>> cfg80211_chan_def *chandef)
>>  		return false;
>>  	}
>> 
>> -	return true;
>> +	return cfg80211_edmg_chandef_valid(chandef);
> 
> 
> I *think* I might prefer the "could this be an EDMG channel" condition
> to be outside, i.e.
> 
> 	if ((chandef->edmg.channels || chandef->edmg.bw_config) &&
> 	    !cfg80211_edmg_chandef_valid(chandef))
> 		return false;
> 
> 	return true;
> 
> 
> That's clearly equivalent to what you have now, but I think it's easier
> to understand that we only enter the "edmg_chandef_valid()" when it
> looks like an EDMG channel and we thus need to validate it.

Agree, done.

> 
> I'd even go as far as saying that we should have an inline for it in
> cfg80211.h:
> 
> static inline bool cfg80211_chandef_is_edmg(...)
> {
> 	return chandef->edmg.channels || chandef->edmg.bw_config;
> }
> 
> and we use that in the code I wrote above, as well as other places that
> want to ask this question.

Done.

> 
> 
>> +	[NL80211_ATTR_WIPHY_EDMG_CHANNELS] = { .type = NLA_U8 },
> 
> Since you say there are only 6 channels, this probably also has a lower
> bound of 1 (need to set at least one bit) and an upper bound of 63 (all
> lower 6 bits set)?

Actually the upper bound is 60, the Spec define that cannot be more than
4 bits "ON"
Updated the policy.

> 
> In any case, thanks for your work on this, and especially for your
> patience with me reviewing.
> 
> johannes

-- 
Alexei Lazar
Qualcomm Israel, on behalf of Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum a
Linux Foundation Collaborative Project