Linux-Wireless Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v2 0/8] rtw88: enhance and stabilize T-Put performance
@ 2019-09-09  7:16 yhchuang
  2019-09-09  7:16 ` [PATCH v2 1/8] rtw88: 8822c: update PHY parameter to v38 yhchuang
                   ` (7 more replies)
  0 siblings, 8 replies; 10+ messages in thread
From: yhchuang @ 2019-09-09  7:16 UTC (permalink / raw)
  To: kvalo; +Cc: linux-wireless, briannorris

From: Yan-Hsuan Chuang <yhchuang@realtek.com>

This patch set could enhance and stabilize the throughput
performance for rtw88, especially for RTL8822CE.

The RFKs, such as IQK and DPK, can make sure the radio
components works more reliable. They reduce the distortion
and nonlinearity that the components inherently have.

The parameter update is a result that is fine-tuned to
optimize the hardware utilization.

And CCK PD can help to adjust CCK signal threshold to
reduce FAs, and get a better TRX performance in 2.4G.

Interrupt migration helps some slower platforms not to
over utilize the host CPU, reduce its loading.


v1 -> v2
   * fix implicit fall-through warnings
   * add more log for FW IQK


Chin-Yen Lee (1):
  rtw88: 8822c: update pwr_seq to v13

Tsang-Shian Lin (1):
  rtw88: 8822c: Enable interrupt migration

Tzu-En Huang (2):
  rtw88: 8822c: add SW DPK support
  rtw88: add dynamic cck pd mechanism

Yan-Hsuan Chuang (4):
  rtw88: 8822c: update PHY parameter to v38
  rtw88: 8822c: add FW IQK support
  rtw88: move IQK/DPK into phy_calibration
  rtw88: allows to receive AMSDU in AMPDU

 drivers/net/wireless/realtek/rtw88/coex.c          |    2 +-
 drivers/net/wireless/realtek/rtw88/coex.h          |    1 +
 drivers/net/wireless/realtek/rtw88/mac80211.c      |    2 +-
 drivers/net/wireless/realtek/rtw88/main.c          |    1 +
 drivers/net/wireless/realtek/rtw88/main.h          |   56 +-
 drivers/net/wireless/realtek/rtw88/phy.c           |  145 +
 drivers/net/wireless/realtek/rtw88/phy.h           |    2 +
 drivers/net/wireless/realtek/rtw88/reg.h           |   17 +
 drivers/net/wireless/realtek/rtw88/rtw8822b.c      |    7 +-
 drivers/net/wireless/realtek/rtw88/rtw8822c.c      | 1178 +++-
 drivers/net/wireless/realtek/rtw88/rtw8822c.h      |   86 +
 .../net/wireless/realtek/rtw88/rtw8822c_table.c    | 6930 ++++++++++++++------
 .../net/wireless/realtek/rtw88/rtw8822c_table.h    |    3 +
 13 files changed, 6325 insertions(+), 2105 deletions(-)

-- 
2.7.4


^ permalink raw reply	[flat|nested] 10+ messages in thread

end of thread, back to index

Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-09-09  7:16 [PATCH v2 0/8] rtw88: enhance and stabilize T-Put performance yhchuang
2019-09-09  7:16 ` [PATCH v2 1/8] rtw88: 8822c: update PHY parameter to v38 yhchuang
2019-09-13 15:04   ` Kalle Valo
2019-09-09  7:16 ` [PATCH v2 2/8] rtw88: 8822c: update pwr_seq to v13 yhchuang
2019-09-09  7:16 ` [PATCH v2 3/8] rtw88: 8822c: Enable interrupt migration yhchuang
2019-09-09  7:16 ` [PATCH v2 4/8] rtw88: 8822c: add FW IQK support yhchuang
2019-09-09  7:16 ` [PATCH v2 5/8] rtw88: 8822c: add SW DPK support yhchuang
2019-09-09  7:16 ` [PATCH v2 6/8] rtw88: move IQK/DPK into phy_calibration yhchuang
2019-09-09  7:16 ` [PATCH v2 7/8] rtw88: add dynamic cck pd mechanism yhchuang
2019-09-09  7:16 ` [PATCH v2 8/8] rtw88: allows to receive AMSDU in AMPDU yhchuang

Linux-Wireless Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-wireless/0 linux-wireless/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-wireless linux-wireless/ https://lore.kernel.org/linux-wireless \
		linux-wireless@vger.kernel.org linux-wireless@archiver.kernel.org
	public-inbox-index linux-wireless

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-wireless


AGPL code for this site: git clone https://public-inbox.org/ public-inbox