From: Manikanta Pubbisetty <quic_mpubbise@quicinc.com>
To: <ath11k@lists.infradead.org>
Cc: <linux-wireless@vger.kernel.org>, <devicetree@vger.kernel.org>,
<robh@kernel.org>,
Manikanta Pubbisetty <quic_mpubbise@quicinc.com>
Subject: [PATCH v2 11/19] ath11k: HAL changes to support WCN6750
Date: Sun, 16 Jan 2022 18:17:07 +0530 [thread overview]
Message-ID: <1642337235-8618-12-git-send-email-quic_mpubbise@quicinc.com> (raw)
In-Reply-To: <1642337235-8618-1-git-send-email-quic_mpubbise@quicinc.com>
Add HAL changes required to support WCN6750. Offsets of some registers
for WCN6750 are different from other supported devices; move such
register offsets to platform specific ath11k_hw_regs.
Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-00573-QCAMSLSWPLZ-1
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00192-QCAHKSWPL_SILICONZ-1
Signed-off-by: Manikanta Pubbisetty <quic_mpubbise@quicinc.com>
---
drivers/net/wireless/ath/ath11k/core.c | 2 +
drivers/net/wireless/ath/ath11k/hal.c | 15 ++--
drivers/net/wireless/ath/ath11k/hal.h | 15 ++--
drivers/net/wireless/ath/ath11k/hw.c | 134 +++++++++++++++++++++++++++++++++
drivers/net/wireless/ath/ath11k/hw.h | 11 +++
5 files changed, 164 insertions(+), 13 deletions(-)
diff --git a/drivers/net/wireless/ath/ath11k/core.c b/drivers/net/wireless/ath/ath11k/core.c
index 3acc3e4..347131a 100644
--- a/drivers/net/wireless/ath/ath11k/core.c
+++ b/drivers/net/wireless/ath/ath11k/core.c
@@ -418,8 +418,10 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
},
.max_radios = 1,
.bdf_addr = 0x4B0C0000,
+ .hw_ops = &wcn6750_ops,
.ring_mask = &ath11k_hw_ring_mask_qca6390,
.internal_sleep_clock = false,
+ .regs = &wcn6750_regs,
.qmi_service_ins_id = ATH11K_QMI_WLFW_SERVICE_INS_ID_V01_WCN6750,
.host_ce_config = ath11k_host_ce_config_qca6390,
.ce_count = 9,
diff --git a/drivers/net/wireless/ath/ath11k/hal.c b/drivers/net/wireless/ath/ath11k/hal.c
index 2ec09ae..9a6340d 100644
--- a/drivers/net/wireless/ath/ath11k/hal.c
+++ b/drivers/net/wireless/ath/ath11k/hal.c
@@ -1,6 +1,7 @@
// SPDX-License-Identifier: BSD-3-Clause-Clear
/*
* Copyright (c) 2018-2019 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2021, Qualcomm Innovation Center, Inc. All rights reserved.
*/
#include <linux/dma-mapping.h>
#include "hal_tx.h"
@@ -1082,10 +1083,10 @@ static void ath11k_hal_srng_update_hp_tp_addr(struct ath11k_base *ab,
srng = &hal->srng_list[ring_id];
if (srng_config->ring_dir == HAL_SRNG_DIR_DST)
- srng->u.dst_ring.tp_addr = (u32 *)(HAL_SHADOW_REG(shadow_cfg_idx) +
+ srng->u.dst_ring.tp_addr = (u32 *)(HAL_SHADOW_REG(ab, shadow_cfg_idx) +
(unsigned long)ab->mem);
else
- srng->u.src_ring.hp_addr = (u32 *)(HAL_SHADOW_REG(shadow_cfg_idx) +
+ srng->u.src_ring.hp_addr = (u32 *)(HAL_SHADOW_REG(ab, shadow_cfg_idx) +
(unsigned long)ab->mem);
}
@@ -1120,7 +1121,7 @@ int ath11k_hal_srng_update_shadow_config(struct ath11k_base *ab,
ath11k_dbg(ab, ATH11k_DBG_HAL,
"target_reg %x, shadow reg 0x%x shadow_idx 0x%x, ring_type %d, ring num %d",
target_reg,
- HAL_SHADOW_REG(shadow_cfg_idx),
+ HAL_SHADOW_REG(ab, shadow_cfg_idx),
shadow_cfg_idx,
ring_type, ring_num);
@@ -1193,12 +1194,12 @@ static int ath11k_hal_srng_create_config(struct ath11k_base *ab)
s->reg_start[1] = HAL_SEQ_WCSS_UMAC_REO_REG + HAL_REO_TCL_RING_HP(ab);
s = &hal->srng_config[HAL_REO_REINJECT];
- s->reg_start[0] = HAL_SEQ_WCSS_UMAC_REO_REG + HAL_SW2REO_RING_BASE_LSB;
- s->reg_start[1] = HAL_SEQ_WCSS_UMAC_REO_REG + HAL_SW2REO_RING_HP;
+ s->reg_start[0] = HAL_SEQ_WCSS_UMAC_REO_REG + HAL_SW2REO_RING_BASE_LSB(ab);
+ s->reg_start[1] = HAL_SEQ_WCSS_UMAC_REO_REG + HAL_SW2REO_RING_HP(ab);
s = &hal->srng_config[HAL_REO_CMD];
- s->reg_start[0] = HAL_SEQ_WCSS_UMAC_REO_REG + HAL_REO_CMD_RING_BASE_LSB;
- s->reg_start[1] = HAL_SEQ_WCSS_UMAC_REO_REG + HAL_REO_CMD_HP;
+ s->reg_start[0] = HAL_SEQ_WCSS_UMAC_REO_REG + HAL_REO_CMD_RING_BASE_LSB(ab);
+ s->reg_start[1] = HAL_SEQ_WCSS_UMAC_REO_REG + HAL_REO_CMD_HP(ab);
s = &hal->srng_config[HAL_REO_STATUS];
s->reg_start[0] = HAL_SEQ_WCSS_UMAC_REO_REG + HAL_REO_STATUS_RING_BASE_LSB(ab);
diff --git a/drivers/net/wireless/ath/ath11k/hal.h b/drivers/net/wireless/ath/ath11k/hal.h
index a7d9b4c..6fbda01 100644
--- a/drivers/net/wireless/ath/ath11k/hal.h
+++ b/drivers/net/wireless/ath/ath11k/hal.h
@@ -1,6 +1,7 @@
/* SPDX-License-Identifier: BSD-3-Clause-Clear */
/*
* Copyright (c) 2018-2019 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2021, Qualcomm Innovation Center, Inc. All rights reserved.
*/
#ifndef ATH11K_HAL_H
@@ -31,12 +32,12 @@ struct ath11k_base;
#define HAL_DSCP_TID_TBL_SIZE 24
/* calculate the register address from bar0 of shadow register x */
-#define HAL_SHADOW_BASE_ADDR 0x000008fc
+#define HAL_SHADOW_BASE_ADDR(ab) ab->hw_params.regs->hal_shadow_base_addr
#define HAL_SHADOW_NUM_REGS 36
#define HAL_HP_OFFSET_IN_REG_START 1
#define HAL_OFFSET_FROM_HP_TO_TP 4
-#define HAL_SHADOW_REG(x) (HAL_SHADOW_BASE_ADDR + (4 * (x)))
+#define HAL_SHADOW_REG(ab, x) (HAL_SHADOW_BASE_ADDR(ab) + (4 * (x)))
/* WCSS Relative address */
#define HAL_SEQ_WCSS_UMAC_OFFSET 0x00a00000
@@ -180,16 +181,18 @@ struct ath11k_base;
#define HAL_REO_TCL_RING_HP(ab) ab->hw_params.regs->hal_reo_tcl_ring_hp
/* REO CMD R0 address */
-#define HAL_REO_CMD_RING_BASE_LSB 0x00000194
+#define HAL_REO_CMD_RING_BASE_LSB(ab) \
+ ab->hw_params.regs->hal_reo_cmd_ring_base_lsb
/* REO CMD R2 address */
-#define HAL_REO_CMD_HP 0x00003020
+#define HAL_REO_CMD_HP(ab) ab->hw_params.regs->hal_reo_cmd_ring_hp
/* SW2REO R0 address */
-#define HAL_SW2REO_RING_BASE_LSB 0x000001ec
+#define HAL_SW2REO_RING_BASE_LSB(ab) \
+ ab->hw_params.regs->hal_sw2reo_ring_base_lsb
/* SW2REO R2 address */
-#define HAL_SW2REO_RING_HP 0x00003028
+#define HAL_SW2REO_RING_HP(ab) ab->hw_params.regs->hal_sw2reo_ring_hp
/* CE ring R0 address */
#define HAL_CE_DST_RING_BASE_LSB 0x00000000
diff --git a/drivers/net/wireless/ath/ath11k/hw.c b/drivers/net/wireless/ath/ath11k/hw.c
index b7e3b66..8d921a6 100644
--- a/drivers/net/wireless/ath/ath11k/hw.c
+++ b/drivers/net/wireless/ath/ath11k/hw.c
@@ -1,6 +1,7 @@
// SPDX-License-Identifier: BSD-3-Clause-Clear
/*
* Copyright (c) 2018-2020 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2021, Qualcomm Innovation Center, Inc. All rights reserved.
*/
#include <linux/types.h>
@@ -1007,6 +1008,13 @@ const struct ath11k_hw_ops wcn6855_ops = {
.rx_desc_mpdu_start_addr2 = ath11k_hw_wcn6855_rx_desc_mpdu_start_addr2,
};
+const struct ath11k_hw_ops wcn6750_ops = {
+ .get_hw_mac_from_pdev_id = ath11k_hw_ipq8074_mac_from_pdev_id,
+ .wmi_init_config = ath11k_init_wmi_config_qca6390,
+ .mac_id_to_pdev_id = ath11k_hw_mac_id_to_pdev_id_qca6390,
+ .mac_id_to_srng_id = ath11k_hw_mac_id_to_srng_id_qca6390,
+};
+
#define ATH11K_TX_RING_MASK_0 0x1
#define ATH11K_TX_RING_MASK_1 0x2
#define ATH11K_TX_RING_MASK_2 0x4
@@ -1901,10 +1909,18 @@ const struct ath11k_hw_regs ipq8074_regs = {
.hal_reo_tcl_ring_base_lsb = 0x000003fc,
.hal_reo_tcl_ring_hp = 0x00003058,
+ /* REO CMD ring address */
+ .hal_reo_cmd_ring_base_lsb = 0x00000194,
+ .hal_reo_cmd_ring_hp = 0x00003020,
+
/* REO status address */
.hal_reo_status_ring_base_lsb = 0x00000504,
.hal_reo_status_hp = 0x00003070,
+ /* SW2REO ring address */
+ .hal_sw2reo_ring_base_lsb = 0x000001ec,
+ .hal_sw2reo_ring_hp = 0x00003028,
+
/* WCSS relative address */
.hal_seq_wcss_umac_ce0_src_reg = 0x00a00000,
.hal_seq_wcss_umac_ce0_dst_reg = 0x00a01000,
@@ -1925,6 +1941,9 @@ const struct ath11k_hw_regs ipq8074_regs = {
/* PCIe base address */
.pcie_qserdes_sysclk_en_sel = 0x0,
.pcie_pcs_osc_dtct_config_base = 0x0,
+
+ /* Shadow register area */
+ .hal_shadow_base_addr = 0x0,
};
const struct ath11k_hw_regs qca6390_regs = {
@@ -1972,10 +1991,18 @@ const struct ath11k_hw_regs qca6390_regs = {
.hal_reo_tcl_ring_base_lsb = 0x000003a4,
.hal_reo_tcl_ring_hp = 0x00003050,
+ /* REO CMD ring address */
+ .hal_reo_cmd_ring_base_lsb = 0x00000194,
+ .hal_reo_cmd_ring_hp = 0x00003020,
+
/* REO status address */
.hal_reo_status_ring_base_lsb = 0x000004ac,
.hal_reo_status_hp = 0x00003068,
+ /* SW2REO ring address */
+ .hal_sw2reo_ring_base_lsb = 0x000001ec,
+ .hal_sw2reo_ring_hp = 0x00003028,
+
/* WCSS relative address */
.hal_seq_wcss_umac_ce0_src_reg = 0x00a00000,
.hal_seq_wcss_umac_ce0_dst_reg = 0x00a01000,
@@ -1996,6 +2023,9 @@ const struct ath11k_hw_regs qca6390_regs = {
/* PCIe base address */
.pcie_qserdes_sysclk_en_sel = 0x01e0c0ac,
.pcie_pcs_osc_dtct_config_base = 0x01e0c628,
+
+ /* Shadow register area */
+ .hal_shadow_base_addr = 0x000008fc,
};
const struct ath11k_hw_regs qcn9074_regs = {
@@ -2043,10 +2073,18 @@ const struct ath11k_hw_regs qcn9074_regs = {
.hal_reo_tcl_ring_base_lsb = 0x000003fc,
.hal_reo_tcl_ring_hp = 0x00003058,
+ /* REO CMD ring address */
+ .hal_reo_cmd_ring_base_lsb = 0x00000194,
+ .hal_reo_cmd_ring_hp = 0x00003020,
+
/* REO status address */
.hal_reo_status_ring_base_lsb = 0x00000504,
.hal_reo_status_hp = 0x00003070,
+ /* SW2REO ring address */
+ .hal_sw2reo_ring_base_lsb = 0x000001ec,
+ .hal_sw2reo_ring_hp = 0x00003028,
+
/* WCSS relative address */
.hal_seq_wcss_umac_ce0_src_reg = 0x01b80000,
.hal_seq_wcss_umac_ce0_dst_reg = 0x01b81000,
@@ -2067,6 +2105,9 @@ const struct ath11k_hw_regs qcn9074_regs = {
/* PCIe base address */
.pcie_qserdes_sysclk_en_sel = 0x01e0e0a8,
.pcie_pcs_osc_dtct_config_base = 0x01e0f45c,
+
+ /* Shadow register area */
+ .hal_shadow_base_addr = 0x0,
};
const struct ath11k_hw_regs wcn6855_regs = {
@@ -2114,10 +2155,18 @@ const struct ath11k_hw_regs wcn6855_regs = {
.hal_reo_tcl_ring_base_lsb = 0x00000454,
.hal_reo_tcl_ring_hp = 0x00003060,
+ /* REO CMD ring address */
+ .hal_reo_cmd_ring_base_lsb = 0x00000194,
+ .hal_reo_cmd_ring_hp = 0x00003020,
+
/* REO status address */
.hal_reo_status_ring_base_lsb = 0x0000055c,
.hal_reo_status_hp = 0x00003078,
+ /* SW2REO ring address */
+ .hal_sw2reo_ring_base_lsb = 0x000001ec,
+ .hal_sw2reo_ring_hp = 0x00003028,
+
/* WCSS relative address */
.hal_seq_wcss_umac_ce0_src_reg = 0x1b80000,
.hal_seq_wcss_umac_ce0_dst_reg = 0x1b81000,
@@ -2138,6 +2187,91 @@ const struct ath11k_hw_regs wcn6855_regs = {
/* PCIe base address */
.pcie_qserdes_sysclk_en_sel = 0x01e0c0ac,
.pcie_pcs_osc_dtct_config_base = 0x01e0c628,
+
+ /* Shadow register area */
+ .hal_shadow_base_addr = 0x000008fc,
+};
+
+const struct ath11k_hw_regs wcn6750_regs = {
+ /* SW2TCL(x) R0 ring configuration address */
+ .hal_tcl1_ring_base_lsb = 0x00000694,
+ .hal_tcl1_ring_base_msb = 0x00000698,
+ .hal_tcl1_ring_id = 0x0000069c,
+ .hal_tcl1_ring_misc = 0x000006a4,
+ .hal_tcl1_ring_tp_addr_lsb = 0x000006b0,
+ .hal_tcl1_ring_tp_addr_msb = 0x000006b4,
+ .hal_tcl1_ring_consumer_int_setup_ix0 = 0x000006c4,
+ .hal_tcl1_ring_consumer_int_setup_ix1 = 0x000006c8,
+ .hal_tcl1_ring_msi1_base_lsb = 0x000006dc,
+ .hal_tcl1_ring_msi1_base_msb = 0x000006e0,
+ .hal_tcl1_ring_msi1_data = 0x000006e4,
+ .hal_tcl2_ring_base_lsb = 0x000006ec,
+ .hal_tcl_ring_base_lsb = 0x0000079c,
+
+ /* TCL STATUS ring address */
+ .hal_tcl_status_ring_base_lsb = 0x000008a4,
+
+ /* REO2SW(x) R0 ring configuration address */
+ .hal_reo1_ring_base_lsb = 0x000001ec,
+ .hal_reo1_ring_base_msb = 0x000001f0,
+ .hal_reo1_ring_id = 0x000001f4,
+ .hal_reo1_ring_misc = 0x000001fc,
+ .hal_reo1_ring_hp_addr_lsb = 0x00000200,
+ .hal_reo1_ring_hp_addr_msb = 0x00000204,
+ .hal_reo1_ring_producer_int_setup = 0x00000210,
+ .hal_reo1_ring_msi1_base_lsb = 0x00000234,
+ .hal_reo1_ring_msi1_base_msb = 0x00000238,
+ .hal_reo1_ring_msi1_data = 0x0000023c,
+ .hal_reo2_ring_base_lsb = 0x00000244,
+ .hal_reo1_aging_thresh_ix_0 = 0x00000564,
+ .hal_reo1_aging_thresh_ix_1 = 0x00000568,
+ .hal_reo1_aging_thresh_ix_2 = 0x0000056c,
+ .hal_reo1_aging_thresh_ix_3 = 0x00000570,
+
+ /* REO2SW(x) R2 ring pointers (head/tail) address */
+ .hal_reo1_ring_hp = 0x00003028,
+ .hal_reo1_ring_tp = 0x0000302c,
+ .hal_reo2_ring_hp = 0x00003030,
+
+ /* REO2TCL R0 ring configuration address */
+ .hal_reo_tcl_ring_base_lsb = 0x000003fc,
+ .hal_reo_tcl_ring_hp = 0x00003058,
+
+ /* REO CMD ring address */
+ .hal_reo_cmd_ring_base_lsb = 0x000000e4,
+ .hal_reo_cmd_ring_hp = 0x00003010,
+
+ /* REO status address */
+ .hal_reo_status_ring_base_lsb = 0x00000504,
+ .hal_reo_status_hp = 0x00003070,
+
+ /* SW2REO ring address */
+ .hal_sw2reo_ring_base_lsb = 0x0000013c,
+ .hal_sw2reo_ring_hp = 0x00003018,
+
+ /* WCSS relative address */
+ .hal_seq_wcss_umac_ce0_src_reg = 0x01b80000,
+ .hal_seq_wcss_umac_ce0_dst_reg = 0x01b81000,
+ .hal_seq_wcss_umac_ce1_src_reg = 0x01b82000,
+ .hal_seq_wcss_umac_ce1_dst_reg = 0x01b83000,
+
+ /* WBM Idle address */
+ .hal_wbm_idle_link_ring_base_lsb = 0x00000874,
+ .hal_wbm_idle_link_ring_misc = 0x00000884,
+
+ /* SW2WBM release address */
+ .hal_wbm_release_ring_base_lsb = 0x000001ec,
+
+ /* WBM2SW release address */
+ .hal_wbm0_release_ring_base_lsb = 0x00000924,
+ .hal_wbm1_release_ring_base_lsb = 0x0000097c,
+
+ /* PCIe base address */
+ .pcie_qserdes_sysclk_en_sel = 0x0,
+ .pcie_pcs_osc_dtct_config_base = 0x0,
+
+ /* Shadow register area */
+ .hal_shadow_base_addr = 0x00000504,
};
const struct ath11k_hw_hal_params ath11k_hw_hal_params_ipq8074 = {
diff --git a/drivers/net/wireless/ath/ath11k/hw.h b/drivers/net/wireless/ath/ath11k/hw.h
index ab258a0..cb48d52 100644
--- a/drivers/net/wireless/ath/ath11k/hw.h
+++ b/drivers/net/wireless/ath/ath11k/hw.h
@@ -1,6 +1,7 @@
/* SPDX-License-Identifier: BSD-3-Clause-Clear */
/*
* Copyright (c) 2018-2019 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2021, Qualcomm Innovation Center, Inc. All rights reserved.
*/
#ifndef ATH11K_HW_H
@@ -240,6 +241,7 @@ extern const struct ath11k_hw_ops ipq6018_ops;
extern const struct ath11k_hw_ops qca6390_ops;
extern const struct ath11k_hw_ops qcn9074_ops;
extern const struct ath11k_hw_ops wcn6855_ops;
+extern const struct ath11k_hw_ops wcn6750_ops;
extern const struct ath11k_hw_ring_mask ath11k_hw_ring_mask_ipq8074;
extern const struct ath11k_hw_ring_mask ath11k_hw_ring_mask_qca6390;
@@ -336,6 +338,12 @@ struct ath11k_hw_regs {
u32 hal_reo_status_ring_base_lsb;
u32 hal_reo_status_hp;
+ u32 hal_reo_cmd_ring_base_lsb;
+ u32 hal_reo_cmd_ring_hp;
+
+ u32 hal_sw2reo_ring_base_lsb;
+ u32 hal_sw2reo_ring_hp;
+
u32 hal_seq_wcss_umac_ce0_src_reg;
u32 hal_seq_wcss_umac_ce0_dst_reg;
u32 hal_seq_wcss_umac_ce1_src_reg;
@@ -351,11 +359,14 @@ struct ath11k_hw_regs {
u32 pcie_qserdes_sysclk_en_sel;
u32 pcie_pcs_osc_dtct_config_base;
+
+ u32 hal_shadow_base_addr;
};
extern const struct ath11k_hw_regs ipq8074_regs;
extern const struct ath11k_hw_regs qca6390_regs;
extern const struct ath11k_hw_regs qcn9074_regs;
extern const struct ath11k_hw_regs wcn6855_regs;
+extern const struct ath11k_hw_regs wcn6750_regs;
#endif
--
2.7.4
next prev parent reply other threads:[~2022-01-16 12:48 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-16 12:46 [PATCH v2 00/19] add support for WCN6750 Manikanta Pubbisetty
2022-01-16 12:46 ` [PATCH v2 01/19] ath11k: PCI changes to support WCN6750 Manikanta Pubbisetty
2022-01-16 12:46 ` [PATCH v2 02/19] ath11k: Refactor PCI code to support hybrid bus devices Manikanta Pubbisetty
2022-01-28 10:16 ` Kalle Valo
2022-02-25 5:50 ` Manikanta Pubbisetty
2022-03-08 6:00 ` Manikanta Pubbisetty
2022-01-28 12:13 ` Kalle Valo
2022-02-21 8:04 ` Manikanta Pubbisetty
2022-02-21 9:19 ` Kalle Valo
2022-02-21 10:19 ` Manikanta Pubbisetty
2022-01-16 12:46 ` [PATCH v2 03/19] ath11k: Choose MSI config based on HW revision Manikanta Pubbisetty
2022-01-16 12:47 ` [PATCH v2 04/19] ath11k: Refactor MSI logic Manikanta Pubbisetty
2022-01-16 12:47 ` [PATCH v2 05/19] ath11k: Remove core PCI references from PCI common code Manikanta Pubbisetty
2022-01-28 10:20 ` Kalle Valo
2022-01-28 10:37 ` Kalle Valo
2022-02-21 7:07 ` Manikanta Pubbisetty
2022-02-21 9:21 ` Kalle Valo
2022-02-21 6:55 ` Manikanta Pubbisetty
2022-02-21 9:17 ` Kalle Valo
2022-02-21 10:08 ` Manikanta Pubbisetty
2022-01-16 12:47 ` [PATCH v2 06/19] ath11k: Add HW params for WCN6750 Manikanta Pubbisetty
2022-01-16 12:47 ` [PATCH v2 07/19] ath11k: Add bus " Manikanta Pubbisetty
2022-01-16 12:47 ` [PATCH v2 08/19] ath11k: Add register access logic " Manikanta Pubbisetty
2022-01-16 12:47 ` [PATCH v2 09/19] ath11k: Fetch device information via QMI " Manikanta Pubbisetty
2022-01-16 12:47 ` [PATCH v2 10/19] ath11k: Add QMI changes " Manikanta Pubbisetty
2022-01-28 10:50 ` Kalle Valo
2022-02-21 8:02 ` Manikanta Pubbisetty
2022-01-16 12:47 ` Manikanta Pubbisetty [this message]
2022-01-16 12:47 ` [PATCH v2 12/19] ath11k: Datapath changes to support WCN6750 Manikanta Pubbisetty
2022-04-27 5:32 ` Kalle Valo
2022-04-27 5:37 ` Manikanta Pubbisetty
2022-04-27 5:48 ` Kalle Valo
2022-04-27 5:56 ` Manikanta Pubbisetty
2022-04-29 8:56 ` Kalle Valo
2022-01-16 12:47 ` [PATCH v2 13/19] ath11k: Fix RX de-fragmentation issue on WCN6750 Manikanta Pubbisetty
2022-01-16 12:47 ` [PATCH v2 14/19] ath11k: Do not put HW in DBS mode for WCN6750 Manikanta Pubbisetty
2022-01-16 12:47 ` [PATCH v2 15/19] ath11k: WMI changes to support WCN6750 Manikanta Pubbisetty
2022-01-16 12:47 ` [PATCH v2 16/19] ath11k: Update WBM idle ring HP after FW mode on Manikanta Pubbisetty
2022-01-16 12:47 ` [PATCH v2 17/19] ath11k: Add support for WCN6750 device Manikanta Pubbisetty
2022-01-16 12:47 ` [PATCH v2 18/19] ath11k: Add support for targets without trustzone Manikanta Pubbisetty
2022-01-28 10:42 ` Kalle Valo
2022-02-21 8:00 ` Manikanta Pubbisetty
2022-01-16 12:47 ` [PATCH v2 19/19] dt: bindings: net: add bindings of WCN6750 for ath11k Manikanta Pubbisetty
2022-01-28 10:39 ` Kalle Valo
2022-02-21 7:08 ` Manikanta Pubbisetty
2022-02-07 22:13 ` Rob Herring
2022-02-25 11:34 ` Manikanta Pubbisetty
2022-01-28 10:07 ` [PATCH v2 00/19] add support for WCN6750 Kalle Valo
2022-02-21 6:29 ` Manikanta Pubbisetty
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1642337235-8618-12-git-send-email-quic_mpubbise@quicinc.com \
--to=quic_mpubbise@quicinc.com \
--cc=ath11k@lists.infradead.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).