* [PATCH V2] b43: Update LP-PHY rev2+ baseband init to match the specs
@ 2009-08-10 18:57 Gábor Stefanik
2009-08-10 19:02 ` Michael Buesch
0 siblings, 1 reply; 2+ messages in thread
From: Gábor Stefanik @ 2009-08-10 18:57 UTC (permalink / raw)
To: John Linville, Michael Buesch
Cc: Larry Finger, Johannes Berg, Broadcom Wireless, linux-wireless
The rev2+ BB init spec has changed behind us, and thus the code is
no longer up to date. Update the code to match the current specs.
Also implement save/restore dig filt state, as required by the
new specification.
Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com>
---
V2: use ARRAY_SIZE for loop counts.
drivers/net/wireless/b43/phy_lp.c | 73 +++++++++++++++++++++++++++++++++++--
drivers/net/wireless/b43/phy_lp.h | 3 ++
2 files changed, 72 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/b43/phy_lp.c b/drivers/net/wireless/b43/phy_lp.c
index d2af924..128d75a 100644
--- a/drivers/net/wireless/b43/phy_lp.c
+++ b/drivers/net/wireless/b43/phy_lp.c
@@ -195,6 +195,56 @@ static void lpphy_baseband_rev0_1_init(struct b43_wldev *dev)
}
}
+static void lpphy_save_dig_flt_state(struct b43_wldev *dev)
+{
+ static const u16 addr[] = {
+ B43_PHY_OFDM(0xC1),
+ B43_PHY_OFDM(0xC2),
+ B43_PHY_OFDM(0xC3),
+ B43_PHY_OFDM(0xC4),
+ B43_PHY_OFDM(0xC5),
+ B43_PHY_OFDM(0xC6),
+ B43_PHY_OFDM(0xC7),
+ B43_PHY_OFDM(0xC8),
+ B43_PHY_OFDM(0xCF),
+ };
+
+ static const u16 coefs[] = {
+ 0xDE5E, 0xE832, 0xE331, 0x4D26,
+ 0x0026, 0x1420, 0x0020, 0xFE08,
+ 0x0008,
+ };
+
+ struct b43_phy_lp *lpphy = dev->phy.lp;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(addr); i++) {
+ lpphy->dig_flt_state[i] = b43_phy_read(dev, addr[i]);
+ b43_phy_write(dev, addr[i], coefs[i]);
+ }
+}
+
+static void lpphy_restore_dig_flt_state(struct b43_wldev *dev)
+{
+ static const u16 addr[] = {
+ B43_PHY_OFDM(0xC1),
+ B43_PHY_OFDM(0xC2),
+ B43_PHY_OFDM(0xC3),
+ B43_PHY_OFDM(0xC4),
+ B43_PHY_OFDM(0xC5),
+ B43_PHY_OFDM(0xC6),
+ B43_PHY_OFDM(0xC7),
+ B43_PHY_OFDM(0xC8),
+ B43_PHY_OFDM(0xCF),
+ };
+
+ struct b43_phy_lp *lpphy = dev->phy.lp;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(addr); i++)
+ b43_phy_write(dev, addr[i], lpphy->dig_flt_state[i]);
+}
+
static void lpphy_baseband_rev2plus_init(struct b43_wldev *dev)
{
struct ssb_bus *bus = dev->dev->bus;
@@ -209,7 +259,7 @@ static void lpphy_baseband_rev2plus_init(struct b43_wldev *dev)
b43_phy_write(dev, B43_PHY_OFDM(0xF9), 0);
b43_phy_write(dev, B43_LPPHY_TR_LOOKUP_1, 0);
b43_phy_set(dev, B43_LPPHY_ADC_COMPENSATION_CTL, 0x10);
- b43_phy_maskset(dev, B43_LPPHY_OFDMSYNCTHRESH0, 0xFF00, 0x78);
+ b43_phy_maskset(dev, B43_LPPHY_OFDMSYNCTHRESH0, 0xFF00, 0xB4);
b43_phy_maskset(dev, B43_LPPHY_DCOFFSETTRANSIENT, 0xF8FF, 0x200);
b43_phy_maskset(dev, B43_LPPHY_DCOFFSETTRANSIENT, 0xFF00, 0x7F);
b43_phy_maskset(dev, B43_LPPHY_GAINDIRECTMISMATCH, 0xFF0F, 0x40);
@@ -217,7 +267,12 @@ static void lpphy_baseband_rev2plus_init(struct b43_wldev *dev)
b43_phy_mask(dev, B43_LPPHY_CRSGAIN_CTL, ~0x4000);
b43_phy_mask(dev, B43_LPPHY_CRSGAIN_CTL, ~0x2000);
b43_phy_set(dev, B43_PHY_OFDM(0x10A), 0x1);
- b43_phy_maskset(dev, B43_PHY_OFDM(0x10A), 0xFF01, 0x10);
+ if (bus->boardinfo.rev >= 0x18) {
+ b43_lptab_write(dev, B43_LPTAB32(17, 65), 0xEC);
+ b43_phy_maskset(dev, B43_PHY_OFDM(0x10A), 0xFF01, 0x14);
+ } else {
+ b43_phy_maskset(dev, B43_PHY_OFDM(0x10A), 0xFF01, 0x10);
+ }
b43_phy_maskset(dev, B43_PHY_OFDM(0xDF), 0xFF00, 0xF4);
b43_phy_maskset(dev, B43_PHY_OFDM(0xDF), 0x00FF, 0xF100);
b43_phy_write(dev, B43_LPPHY_CLIPTHRESH, 0x48);
@@ -247,8 +302,10 @@ static void lpphy_baseband_rev2plus_init(struct b43_wldev *dev)
b43_phy_maskset(dev, B43_LPPHY_CLIPCTRTHRESH, 0xFFE0, 0x12);
b43_phy_maskset(dev, B43_LPPHY_GAINMISMATCH, 0x0FFF, 0x9000);
- b43_lptab_write(dev, B43_LPTAB16(0x08, 0x14), 0);
- b43_lptab_write(dev, B43_LPTAB16(0x08, 0x12), 0x40);
+ if ((bus->chip_id == 0x4325) && (bus->chip_rev == 1)) {
+ b43_lptab_write(dev, B43_LPTAB16(0x08, 0x14), 0);
+ b43_lptab_write(dev, B43_LPTAB16(0x08, 0x12), 0x40);
+ }
if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) {
b43_phy_set(dev, B43_LPPHY_CRSGAIN_CTL, 0x40);
@@ -268,6 +325,14 @@ static void lpphy_baseband_rev2plus_init(struct b43_wldev *dev)
b43_phy_write(dev, B43_LPPHY_AFE_RSSI_CTL_1,
0x2000 | ((u16)lpphy->rssi_gs << 10) |
((u16)lpphy->rssi_vc << 4) | lpphy->rssi_vf);
+
+ if ((bus->chip_id == 0x4325) && (bus->chip_rev == 0)) {
+ b43_phy_set(dev, B43_LPPHY_AFE_ADC_CTL_0, 0x1C);
+ b43_phy_maskset(dev, B43_LPPHY_AFE_CTL, 0x00FF, 0x8800);
+ b43_phy_maskset(dev, B43_LPPHY_AFE_ADC_CTL_1, 0xFC3C, 0x0400);
+ }
+
+ lpphy_save_dig_flt_state(dev);
}
static void lpphy_baseband_init(struct b43_wldev *dev)
diff --git a/drivers/net/wireless/b43/phy_lp.h b/drivers/net/wireless/b43/phy_lp.h
index 829b2bb..13d89ea 100644
--- a/drivers/net/wireless/b43/phy_lp.h
+++ b/drivers/net/wireless/b43/phy_lp.h
@@ -865,6 +865,9 @@ struct b43_phy_lp {
/* Transmit iqlocal best coeffs */
bool tx_iqloc_best_coeffs_valid;
u8 tx_iqloc_best_coeffs[11];
+
+ /* Used for "Save/Restore Dig Filt State" */
+ u16 dig_flt_state[9];
};
--
1.6.2.4
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH V2] b43: Update LP-PHY rev2+ baseband init to match the specs
2009-08-10 18:57 [PATCH V2] b43: Update LP-PHY rev2+ baseband init to match the specs Gábor Stefanik
@ 2009-08-10 19:02 ` Michael Buesch
0 siblings, 0 replies; 2+ messages in thread
From: Michael Buesch @ 2009-08-10 19:02 UTC (permalink / raw)
To: Gábor Stefanik
Cc: John Linville, Larry Finger, Johannes Berg, Broadcom Wireless,
linux-wireless
On Monday 10 August 2009 20:57:06 Gábor Stefanik wrote:
> The rev2+ BB init spec has changed behind us, and thus the code is
> no longer up to date. Update the code to match the current specs.
> Also implement save/restore dig filt state, as required by the
> new specification.
>
> Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com>
> ---
> V2: use ARRAY_SIZE for loop counts.
ack
--
Greetings, Michael.
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2009-08-10 19:02 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2009-08-10 18:57 [PATCH V2] b43: Update LP-PHY rev2+ baseband init to match the specs Gábor Stefanik
2009-08-10 19:02 ` Michael Buesch
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).