* [PATCH] b43: LP-PHY: Implement channel switching for rev2+/B2063 radio
@ 2009-08-13 20:46 Gábor Stefanik
2009-08-14 20:16 ` Michael Buesch
0 siblings, 1 reply; 2+ messages in thread
From: Gábor Stefanik @ 2009-08-13 20:46 UTC (permalink / raw)
To: John Linville, Michael Buesch, Larry Finger
Cc: Broadcom Wireless, linux-wireless
Rev.2+/B2063 will now hopefully show some signs of life, though
it won't work at full performance, as calibration is still missing.
Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com>
---
Changes since RFC v2:
-Replaced table-based channel2freq with a proper (mathematical) one.
-Removed use of hw->conf.channel everywhere (except b43_current_band).
-Fixed uninitialized chandata pointer.
-Fixed NULL pointer dereference when changing to invalid channel.
Changes between RFC v1->v2:
-Reordered channel table ascending by channel number.
-Reordered a few functions.
-b43_switch_channel replaced with b43_op_lpphy_switch_channel in init.
-Init now switches to default channel, rather than conf.channel->hw_value.
-Chandata is now a pointer.
-The table-based channel-to-frequency conversion has been broken out
into a separate function.
-Removed a FIXME that didn't need fixing.
drivers/net/wireless/b43/phy_lp.c | 424 +++++++++++++++++++++++++++++++++++--
1 files changed, 402 insertions(+), 22 deletions(-)
diff --git a/drivers/net/wireless/b43/phy_lp.c b/drivers/net/wireless/b43/phy_lp.c
index b4e51f0..992e250 100644
--- a/drivers/net/wireless/b43/phy_lp.c
+++ b/drivers/net/wireless/b43/phy_lp.c
@@ -29,6 +29,25 @@
#include "tables_lpphy.h"
+static inline u16 channel2freq_lp(u8 channel)
+{
+ if (channel < 14)
+ return (2407 + 5 * channel);
+ else if (channel == 14)
+ return 2484;
+ else if (channel < 184)
+ return (5000 + 5 * channel);
+ else
+ return (4000 + 5 * channel);
+}
+
+static unsigned int b43_lpphy_op_get_default_chan(struct b43_wldev *dev)
+{
+ if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ)
+ return 1;
+ return 36;
+}
+
static int b43_lpphy_op_allocate(struct b43_wldev *dev)
{
struct b43_phy_lp *lpphy;
@@ -142,10 +161,9 @@ static void lpphy_read_band_sprom(struct b43_wldev *dev)
}
}
-static void lpphy_adjust_gain_table(struct b43_wldev *dev)
+static void lpphy_adjust_gain_table(struct b43_wldev *dev, u32 freq)
{
struct b43_phy_lp *lpphy = dev->phy.lp;
- u32 freq = dev->wl->hw->conf.channel->center_freq;
u16 temp[3];
u16 isolation;
@@ -170,6 +188,8 @@ static void lpphy_adjust_gain_table(struct b43_wldev *dev)
static void lpphy_table_init(struct b43_wldev *dev)
{
+ u32 freq = channel2freq_lp(b43_lpphy_op_get_default_chan(dev));
+
if (dev->phy.rev < 2)
lpphy_rev0_1_table_init(dev);
else
@@ -178,7 +198,7 @@ static void lpphy_table_init(struct b43_wldev *dev)
lpphy_init_tx_gain_table(dev);
if (dev->phy.rev < 2)
- lpphy_adjust_gain_table(dev);
+ lpphy_adjust_gain_table(dev, freq);
}
static void lpphy_baseband_rev0_1_init(struct b43_wldev *dev)
@@ -1363,20 +1383,6 @@ static void lpphy_tx_pctl_init(struct b43_wldev *dev)
}
}
-static int b43_lpphy_op_init(struct b43_wldev *dev)
-{
- lpphy_read_band_sprom(dev); //FIXME should this be in prepare_structs?
- lpphy_baseband_init(dev);
- lpphy_radio_init(dev);
- lpphy_calibrate_rc(dev);
- //TODO set channel
- lpphy_tx_pctl_init(dev);
- lpphy_calibration(dev);
- //TODO ACI init
-
- return 0;
-}
-
static u16 b43_lpphy_op_read(struct b43_wldev *dev, u16 reg)
{
b43_write16(dev, B43_MMIO_PHY_CONTROL, reg);
@@ -1419,18 +1425,392 @@ static void b43_lpphy_op_software_rfkill(struct b43_wldev *dev,
//TODO
}
+struct b206x_channel {
+ u8 channel;
+ u16 freq;
+ u8 data[12];
+};
+
+static const struct b206x_channel b2063_chantbl[] = {
+ { .channel = 1, .freq = 2412, .data[0] = 0x6F, .data[1] = 0x3C,
+ .data[2] = 0x3C, .data[3] = 0x04, .data[4] = 0x05, .data[5] = 0x05,
+ .data[6] = 0x05, .data[7] = 0x05, .data[8] = 0x77, .data[9] = 0x80,
+ .data[10] = 0x80, .data[11] = 0x70, },
+ { .channel = 2, .freq = 2417, .data[0] = 0x6F, .data[1] = 0x3C,
+ .data[2] = 0x3C, .data[3] = 0x04, .data[4] = 0x05, .data[5] = 0x05,
+ .data[6] = 0x05, .data[7] = 0x05, .data[8] = 0x77, .data[9] = 0x80,
+ .data[10] = 0x80, .data[11] = 0x70, },
+ { .channel = 3, .freq = 2422, .data[0] = 0x6F, .data[1] = 0x3C,
+ .data[2] = 0x3C, .data[3] = 0x04, .data[4] = 0x05, .data[5] = 0x05,
+ .data[6] = 0x05, .data[7] = 0x05, .data[8] = 0x77, .data[9] = 0x80,
+ .data[10] = 0x80, .data[11] = 0x70, },
+ { .channel = 4, .freq = 2427, .data[0] = 0x6F, .data[1] = 0x2C,
+ .data[2] = 0x2C, .data[3] = 0x04, .data[4] = 0x05, .data[5] = 0x05,
+ .data[6] = 0x05, .data[7] = 0x05, .data[8] = 0x77, .data[9] = 0x80,
+ .data[10] = 0x80, .data[11] = 0x70, },
+ { .channel = 5, .freq = 2432, .data[0] = 0x6F, .data[1] = 0x2C,
+ .data[2] = 0x2C, .data[3] = 0x04, .data[4] = 0x05, .data[5] = 0x05,
+ .data[6] = 0x05, .data[7] = 0x05, .data[8] = 0x77, .data[9] = 0x80,
+ .data[10] = 0x80, .data[11] = 0x70, },
+ { .channel = 6, .freq = 2437, .data[0] = 0x6F, .data[1] = 0x2C,
+ .data[2] = 0x2C, .data[3] = 0x04, .data[4] = 0x05, .data[5] = 0x05,
+ .data[6] = 0x05, .data[7] = 0x05, .data[8] = 0x77, .data[9] = 0x80,
+ .data[10] = 0x80, .data[11] = 0x70, },
+ { .channel = 7, .freq = 2442, .data[0] = 0x6F, .data[1] = 0x2C,
+ .data[2] = 0x2C, .data[3] = 0x04, .data[4] = 0x05, .data[5] = 0x05,
+ .data[6] = 0x05, .data[7] = 0x05, .data[8] = 0x77, .data[9] = 0x80,
+ .data[10] = 0x80, .data[11] = 0x70, },
+ { .channel = 8, .freq = 2447, .data[0] = 0x6F, .data[1] = 0x2C,
+ .data[2] = 0x2C, .data[3] = 0x04, .data[4] = 0x05, .data[5] = 0x05,
+ .data[6] = 0x05, .data[7] = 0x05, .data[8] = 0x77, .data[9] = 0x80,
+ .data[10] = 0x80, .data[11] = 0x70, },
+ { .channel = 9, .freq = 2452, .data[0] = 0x6F, .data[1] = 0x1C,
+ .data[2] = 0x1C, .data[3] = 0x04, .data[4] = 0x05, .data[5] = 0x05,
+ .data[6] = 0x05, .data[7] = 0x05, .data[8] = 0x77, .data[9] = 0x80,
+ .data[10] = 0x80, .data[11] = 0x70, },
+ { .channel = 10, .freq = 2457, .data[0] = 0x6F, .data[1] = 0x1C,
+ .data[2] = 0x1C, .data[3] = 0x04, .data[4] = 0x05, .data[5] = 0x05,
+ .data[6] = 0x05, .data[7] = 0x05, .data[8] = 0x77, .data[9] = 0x80,
+ .data[10] = 0x80, .data[11] = 0x70, },
+ { .channel = 11, .freq = 2462, .data[0] = 0x6E, .data[1] = 0x1C,
+ .data[2] = 0x1C, .data[3] = 0x04, .data[4] = 0x05, .data[5] = 0x05,
+ .data[6] = 0x05, .data[7] = 0x05, .data[8] = 0x77, .data[9] = 0x80,
+ .data[10] = 0x80, .data[11] = 0x70, },
+ { .channel = 12, .freq = 2467, .data[0] = 0x6E, .data[1] = 0x1C,
+ .data[2] = 0x1C, .data[3] = 0x04, .data[4] = 0x05, .data[5] = 0x05,
+ .data[6] = 0x05, .data[7] = 0x05, .data[8] = 0x77, .data[9] = 0x80,
+ .data[10] = 0x80, .data[11] = 0x70, },
+ { .channel = 13, .freq = 2472, .data[0] = 0x6E, .data[1] = 0x1C,
+ .data[2] = 0x1C, .data[3] = 0x04, .data[4] = 0x05, .data[5] = 0x05,
+ .data[6] = 0x05, .data[7] = 0x05, .data[8] = 0x77, .data[9] = 0x80,
+ .data[10] = 0x80, .data[11] = 0x70, },
+ { .channel = 14, .freq = 2484, .data[0] = 0x6E, .data[1] = 0x0C,
+ .data[2] = 0x0C, .data[3] = 0x04, .data[4] = 0x05, .data[5] = 0x05,
+ .data[6] = 0x05, .data[7] = 0x05, .data[8] = 0x77, .data[9] = 0x80,
+ .data[10] = 0x80, .data[11] = 0x70, },
+ { .channel = 34, .freq = 5170, .data[0] = 0x6A, .data[1] = 0x0C,
+ .data[2] = 0x0C, .data[3] = 0x00, .data[4] = 0x02, .data[5] = 0x05,
+ .data[6] = 0x0D, .data[7] = 0x0D, .data[8] = 0x77, .data[9] = 0x80,
+ .data[10] = 0x20, .data[11] = 0x00, },
+ { .channel = 36, .freq = 5180, .data[0] = 0x6A, .data[1] = 0x0C,
+ .data[2] = 0x0C, .data[3] = 0x00, .data[4] = 0x01, .data[5] = 0x05,
+ .data[6] = 0x0D, .data[7] = 0x0C, .data[8] = 0x77, .data[9] = 0x80,
+ .data[10] = 0x20, .data[11] = 0x00, },
+ { .channel = 38, .freq = 5190, .data[0] = 0x6A, .data[1] = 0x0C,
+ .data[2] = 0x0C, .data[3] = 0x00, .data[4] = 0x01, .data[5] = 0x04,
+ .data[6] = 0x0C, .data[7] = 0x0C, .data[8] = 0x77, .data[9] = 0x80,
+ .data[10] = 0x20, .data[11] = 0x00, },
+ { .channel = 40, .freq = 5200, .data[0] = 0x69, .data[1] = 0x0C,
+ .data[2] = 0x0C, .data[3] = 0x00, .data[4] = 0x01, .data[5] = 0x04,
+ .data[6] = 0x0C, .data[7] = 0x0C, .data[8] = 0x77, .data[9] = 0x70,
+ .data[10] = 0x20, .data[11] = 0x00, },
+ { .channel = 42, .freq = 5210, .data[0] = 0x69, .data[1] = 0x0C,
+ .data[2] = 0x0C, .data[3] = 0x00, .data[4] = 0x01, .data[5] = 0x04,
+ .data[6] = 0x0B, .data[7] = 0x0C, .data[8] = 0x77, .data[9] = 0x70,
+ .data[10] = 0x20, .data[11] = 0x00, },
+ { .channel = 44, .freq = 5220, .data[0] = 0x69, .data[1] = 0x0C,
+ .data[2] = 0x0C, .data[3] = 0x00, .data[4] = 0x00, .data[5] = 0x04,
+ .data[6] = 0x0B, .data[7] = 0x0B, .data[8] = 0x77, .data[9] = 0x60,
+ .data[10] = 0x20, .data[11] = 0x00, },
+ { .channel = 46, .freq = 5230, .data[0] = 0x69, .data[1] = 0x0C,
+ .data[2] = 0x0C, .data[3] = 0x00, .data[4] = 0x00, .data[5] = 0x03,
+ .data[6] = 0x0A, .data[7] = 0x0B, .data[8] = 0x77, .data[9] = 0x60,
+ .data[10] = 0x20, .data[11] = 0x00, },
+ { .channel = 48, .freq = 5240, .data[0] = 0x69, .data[1] = 0x0C,
+ .data[2] = 0x0C, .data[3] = 0x00, .data[4] = 0x00, .data[5] = 0x03,
+ .data[6] = 0x0A, .data[7] = 0x0A, .data[8] = 0x77, .data[9] = 0x60,
+ .data[10] = 0x20, .data[11] = 0x00, },
+ { .channel = 52, .freq = 5260, .data[0] = 0x68, .data[1] = 0x0C,
+ .data[2] = 0x0C, .data[3] = 0x00, .data[4] = 0x00, .data[5] = 0x02,
+ .data[6] = 0x09, .data[7] = 0x09, .data[8] = 0x77, .data[9] = 0x60,
+ .data[10] = 0x20, .data[11] = 0x00, },
+ { .channel = 56, .freq = 5280, .data[0] = 0x68, .data[1] = 0x0C,
+ .data[2] = 0x0C, .data[3] = 0x00, .data[4] = 0x00, .data[5] = 0x01,
+ .data[6] = 0x08, .data[7] = 0x08, .data[8] = 0x77, .data[9] = 0x50,
+ .data[10] = 0x10, .data[11] = 0x00, },
+ { .channel = 60, .freq = 5300, .data[0] = 0x68, .data[1] = 0x0C,
+ .data[2] = 0x0C, .data[3] = 0x00, .data[4] = 0x00, .data[5] = 0x01,
+ .data[6] = 0x08, .data[7] = 0x08, .data[8] = 0x77, .data[9] = 0x50,
+ .data[10] = 0x10, .data[11] = 0x00, },
+ { .channel = 64, .freq = 5320, .data[0] = 0x67, .data[1] = 0x0C,
+ .data[2] = 0x0C, .data[3] = 0x00, .data[4] = 0x00, .data[5] = 0x00,
+ .data[6] = 0x08, .data[7] = 0x08, .data[8] = 0x77, .data[9] = 0x50,
+ .data[10] = 0x10, .data[11] = 0x00, },
+ { .channel = 100, .freq = 5500, .data[0] = 0x64, .data[1] = 0x0C,
+ .data[2] = 0x0C, .data[3] = 0x00, .data[4] = 0x00, .data[5] = 0x00,
+ .data[6] = 0x02, .data[7] = 0x01, .data[8] = 0x77, .data[9] = 0x20,
+ .data[10] = 0x00, .data[11] = 0x00, },
+ { .channel = 104, .freq = 5520, .data[0] = 0x64, .data[1] = 0x0C,
+ .data[2] = 0x0C, .data[3] = 0x00, .data[4] = 0x00, .data[5] = 0x00,
+ .data[6] = 0x01, .data[7] = 0x01, .data[8] = 0x77, .data[9] = 0x20,
+ .data[10] = 0x00, .data[11] = 0x00, },
+ { .channel = 108, .freq = 5540, .data[0] = 0x63, .data[1] = 0x0C,
+ .data[2] = 0x0C, .data[3] = 0x00, .data[4] = 0x00, .data[5] = 0x00,
+ .data[6] = 0x01, .data[7] = 0x00, .data[8] = 0x77, .data[9] = 0x10,
+ .data[10] = 0x00, .data[11] = 0x00, },
+ { .channel = 112, .freq = 5560, .data[0] = 0x63, .data[1] = 0x0C,
+ .data[2] = 0x0C, .data[3] = 0x00, .data[4] = 0x00, .data[5] = 0x00,
+ .data[6] = 0x00, .data[7] = 0x00, .data[8] = 0x77, .data[9] = 0x10,
+ .data[10] = 0x00, .data[11] = 0x00, },
+ { .channel = 116, .freq = 5580, .data[0] = 0x62, .data[1] = 0x0C,
+ .data[2] = 0x0C, .data[3] = 0x00, .data[4] = 0x00, .data[5] = 0x00,
+ .data[6] = 0x00, .data[7] = 0x00, .data[8] = 0x77, .data[9] = 0x10,
+ .data[10] = 0x00, .data[11] = 0x00, },
+ { .channel = 120, .freq = 5600, .data[0] = 0x62, .data[1] = 0x0C,
+ .data[2] = 0x0C, .data[3] = 0x00, .data[4] = 0x00, .data[5] = 0x00,
+ .data[6] = 0x00, .data[7] = 0x00, .data[8] = 0x77, .data[9] = 0x00,
+ .data[10] = 0x00, .data[11] = 0x00, },
+ { .channel = 124, .freq = 5620, .data[0] = 0x62, .data[1] = 0x0C,
+ .data[2] = 0x0C, .data[3] = 0x00, .data[4] = 0x00, .data[5] = 0x00,
+ .data[6] = 0x00, .data[7] = 0x00, .data[8] = 0x77, .data[9] = 0x00,
+ .data[10] = 0x00, .data[11] = 0x00, },
+ { .channel = 128, .freq = 5640, .data[0] = 0x61, .data[1] = 0x0C,
+ .data[2] = 0x0C, .data[3] = 0x00, .data[4] = 0x00, .data[5] = 0x00,
+ .data[6] = 0x00, .data[7] = 0x00, .data[8] = 0x77, .data[9] = 0x00,
+ .data[10] = 0x00, .data[11] = 0x00, },
+ { .channel = 132, .freq = 5660, .data[0] = 0x61, .data[1] = 0x0C,
+ .data[2] = 0x0C, .data[3] = 0x00, .data[4] = 0x00, .data[5] = 0x00,
+ .data[6] = 0x00, .data[7] = 0x00, .data[8] = 0x77, .data[9] = 0x00,
+ .data[10] = 0x00, .data[11] = 0x00, },
+ { .channel = 136, .freq = 5680, .data[0] = 0x61, .data[1] = 0x0C,
+ .data[2] = 0x0C, .data[3] = 0x00, .data[4] = 0x00, .data[5] = 0x00,
+ .data[6] = 0x00, .data[7] = 0x00, .data[8] = 0x77, .data[9] = 0x00,
+ .data[10] = 0x00, .data[11] = 0x00, },
+ { .channel = 140, .freq = 5700, .data[0] = 0x60, .data[1] = 0x0C,
+ .data[2] = 0x0C, .data[3] = 0x00, .data[4] = 0x00, .data[5] = 0x00,
+ .data[6] = 0x00, .data[7] = 0x00, .data[8] = 0x77, .data[9] = 0x00,
+ .data[10] = 0x00, .data[11] = 0x00, },
+ { .channel = 149, .freq = 5745, .data[0] = 0x60, .data[1] = 0x0C,
+ .data[2] = 0x0C, .data[3] = 0x00, .data[4] = 0x00, .data[5] = 0x00,
+ .data[6] = 0x00, .data[7] = 0x00, .data[8] = 0x77, .data[9] = 0x00,
+ .data[10] = 0x00, .data[11] = 0x00, },
+ { .channel = 153, .freq = 5765, .data[0] = 0x60, .data[1] = 0x0C,
+ .data[2] = 0x0C, .data[3] = 0x00, .data[4] = 0x00, .data[5] = 0x00,
+ .data[6] = 0x00, .data[7] = 0x00, .data[8] = 0x77, .data[9] = 0x00,
+ .data[10] = 0x00, .data[11] = 0x00, },
+ { .channel = 157, .freq = 5785, .data[0] = 0x60, .data[1] = 0x0C,
+ .data[2] = 0x0C, .data[3] = 0x00, .data[4] = 0x00, .data[5] = 0x00,
+ .data[6] = 0x00, .data[7] = 0x00, .data[8] = 0x77, .data[9] = 0x00,
+ .data[10] = 0x00, .data[11] = 0x00, },
+ { .channel = 161, .freq = 5805, .data[0] = 0x60, .data[1] = 0x0C,
+ .data[2] = 0x0C, .data[3] = 0x00, .data[4] = 0x00, .data[5] = 0x00,
+ .data[6] = 0x00, .data[7] = 0x00, .data[8] = 0x77, .data[9] = 0x00,
+ .data[10] = 0x00, .data[11] = 0x00, },
+ { .channel = 165, .freq = 5825, .data[0] = 0x60, .data[1] = 0x0C,
+ .data[2] = 0x0C, .data[3] = 0x00, .data[4] = 0x00, .data[5] = 0x00,
+ .data[6] = 0x00, .data[7] = 0x00, .data[8] = 0x77, .data[9] = 0x00,
+ .data[10] = 0x00, .data[11] = 0x00, },
+ { .channel = 184, .freq = 4920, .data[0] = 0x6E, .data[1] = 0x0C,
+ .data[2] = 0x0C, .data[3] = 0x00, .data[4] = 0x09, .data[5] = 0x0E,
+ .data[6] = 0x0F, .data[7] = 0x0F, .data[8] = 0x77, .data[9] = 0xC0,
+ .data[10] = 0x50, .data[11] = 0x00, },
+ { .channel = 188, .freq = 4940, .data[0] = 0x6E, .data[1] = 0x0C,
+ .data[2] = 0x0C, .data[3] = 0x00, .data[4] = 0x09, .data[5] = 0x0D,
+ .data[6] = 0x0F, .data[7] = 0x0F, .data[8] = 0x77, .data[9] = 0xB0,
+ .data[10] = 0x50, .data[11] = 0x00, },
+ { .channel = 192, .freq = 4960, .data[0] = 0x6E, .data[1] = 0x0C,
+ .data[2] = 0x0C, .data[3] = 0x00, .data[4] = 0x08, .data[5] = 0x0C,
+ .data[6] = 0x0F, .data[7] = 0x0F, .data[8] = 0x77, .data[9] = 0xB0,
+ .data[10] = 0x50, .data[11] = 0x00, },
+ { .channel = 196, .freq = 4980, .data[0] = 0x6D, .data[1] = 0x0C,
+ .data[2] = 0x0C, .data[3] = 0x00, .data[4] = 0x08, .data[5] = 0x0C,
+ .data[6] = 0x0F, .data[7] = 0x0F, .data[8] = 0x77, .data[9] = 0xA0,
+ .data[10] = 0x40, .data[11] = 0x00, },
+ { .channel = 200, .freq = 5000, .data[0] = 0x6D, .data[1] = 0x0C,
+ .data[2] = 0x0C, .data[3] = 0x00, .data[4] = 0x08, .data[5] = 0x0B,
+ .data[6] = 0x0F, .data[7] = 0x0F, .data[8] = 0x77, .data[9] = 0xA0,
+ .data[10] = 0x40, .data[11] = 0x00, },
+ { .channel = 204, .freq = 5020, .data[0] = 0x6D, .data[1] = 0x0C,
+ .data[2] = 0x0C, .data[3] = 0x00, .data[4] = 0x08, .data[5] = 0x0A,
+ .data[6] = 0x0F, .data[7] = 0x0F, .data[8] = 0x77, .data[9] = 0xA0,
+ .data[10] = 0x40, .data[11] = 0x00, },
+ { .channel = 208, .freq = 5040, .data[0] = 0x6C, .data[1] = 0x0C,
+ .data[2] = 0x0C, .data[3] = 0x00, .data[4] = 0x07, .data[5] = 0x09,
+ .data[6] = 0x0F, .data[7] = 0x0F, .data[8] = 0x77, .data[9] = 0x90,
+ .data[10] = 0x40, .data[11] = 0x00, },
+ { .channel = 212, .freq = 5060, .data[0] = 0x6C, .data[1] = 0x0C,
+ .data[2] = 0x0C, .data[3] = 0x00, .data[4] = 0x06, .data[5] = 0x08,
+ .data[6] = 0x0F, .data[7] = 0x0F, .data[8] = 0x77, .data[9] = 0x90,
+ .data[10] = 0x40, .data[11] = 0x00, },
+ { .channel = 216, .freq = 5080, .data[0] = 0x6C, .data[1] = 0x0C,
+ .data[2] = 0x0C, .data[3] = 0x00, .data[4] = 0x05, .data[5] = 0x08,
+ .data[6] = 0x0F, .data[7] = 0x0F, .data[8] = 0x77, .data[9] = 0x90,
+ .data[10] = 0x40, .data[11] = 0x00, },
+};
+
+static void lpphy_b2062_tune(struct b43_wldev *dev,
+ unsigned int channel)
+{
+ //TODO
+}
+
+static void lpphy_b2063_vco_calib(struct b43_wldev *dev)
+{
+ u16 tmp;
+
+ b43_phy_mask(dev, B2063_PLL_SP1, ~0x40);
+ tmp = b43_phy_read(dev, B2063_PLL_JTAG_CALNRST) & 0xF8;
+ b43_phy_write(dev, B2063_PLL_JTAG_CALNRST, tmp);
+ udelay(1);
+ b43_phy_write(dev, B2063_PLL_JTAG_CALNRST, tmp | 0x4);
+ udelay(1);
+ b43_phy_write(dev, B2063_PLL_JTAG_CALNRST, tmp | 0x6);
+ udelay(1);
+ b43_phy_write(dev, B2063_PLL_JTAG_CALNRST, tmp | 0x7);
+ udelay(300);
+ b43_phy_set(dev, B2063_PLL_SP1, 0x40);
+}
+
+static void lpphy_b2063_tune(struct b43_wldev *dev,
+ unsigned int channel)
+{
+ struct ssb_bus *bus = dev->dev->bus;
+
+ static const struct b206x_channel *chandata = NULL;
+ u32 crystal_freq = bus->chipco.pmu.crystalfreq * 1000;
+ u32 freqref, vco_freq, val1, val2, val3, timeout, timeoutref, count;
+ u16 old_comm15, scale;
+ u32 tmp1, tmp2, tmp3, tmp4, tmp5, tmp6;
+ int i, div = (crystal_freq <= 26000000 ? 1 : 2);
+
+ for (i = 0; i < ARRAY_SIZE(b2063_chantbl); i++) {
+ if (b2063_chantbl[i].channel == channel) {
+ chandata = &b2063_chantbl[i];
+ break;
+ }
+ }
+
+ if (B43_WARN_ON(!chandata))
+ return;
+
+ b43_radio_write(dev, B2063_LOGEN_VCOBUF1, chandata->data[0]);
+ b43_radio_write(dev, B2063_LOGEN_MIXER2, chandata->data[1]);
+ b43_radio_write(dev, B2063_LOGEN_BUF2, chandata->data[2]);
+ b43_radio_write(dev, B2063_LOGEN_RCCR1, chandata->data[3]);
+ b43_radio_write(dev, B2063_A_RX_1ST3, chandata->data[4]);
+ b43_radio_write(dev, B2063_A_RX_2ND1, chandata->data[5]);
+ b43_radio_write(dev, B2063_A_RX_2ND4, chandata->data[6]);
+ b43_radio_write(dev, B2063_A_RX_2ND7, chandata->data[7]);
+ b43_radio_write(dev, B2063_A_RX_PS6, chandata->data[8]);
+ b43_radio_write(dev, B2063_TX_RF_CTL2, chandata->data[9]);
+ b43_radio_write(dev, B2063_TX_RF_CTL5, chandata->data[10]);
+ b43_radio_write(dev, B2063_PA_CTL11, chandata->data[11]);
+
+ old_comm15 = b43_radio_read(dev, B2063_COMM15);
+ b43_radio_set(dev, B2063_COMM15, 0x1E);
+
+ if (chandata->freq > 4000) /* spec says 2484, but 4000 is safer */
+ vco_freq = chandata->freq << 1;
+ else
+ vco_freq = chandata->freq << 2;
+
+ freqref = crystal_freq * 3;
+ val1 = lpphy_qdiv_roundup(crystal_freq, 1000000, 16);
+ val2 = lpphy_qdiv_roundup(crystal_freq, 1000000 * div, 16);
+ val3 = lpphy_qdiv_roundup(vco_freq, 3, 16);
+ timeout = ((((8 * crystal_freq) / (div * 5000000)) + 1) >> 1) - 1;
+ b43_radio_write(dev, B2063_PLL_JTAG_PLL_VCO_CALIB3, 0x2);
+ b43_radio_maskset(dev, B2063_PLL_JTAG_PLL_VCO_CALIB6,
+ 0xFFF8, timeout >> 2);
+ b43_radio_maskset(dev, B2063_PLL_JTAG_PLL_VCO_CALIB7,
+ 0xFF9F,timeout << 5);
+
+ timeoutref = ((((8 * crystal_freq) / (div * (timeout + 1))) +
+ 999999) / 1000000) + 1;
+ b43_radio_write(dev, B2063_PLL_JTAG_PLL_VCO_CALIB5, timeoutref);
+
+ count = lpphy_qdiv_roundup(val3, val2 + 16, 16);
+ count *= (timeout + 1) * (timeoutref + 1);
+ count--;
+ b43_radio_maskset(dev, B2063_PLL_JTAG_PLL_VCO_CALIB7,
+ 0xF0, count >> 8);
+ b43_radio_write(dev, B2063_PLL_JTAG_PLL_VCO_CALIB8, count & 0xFF);
+
+ tmp1 = ((val3 * 62500) / freqref) << 4;
+ tmp2 = ((val3 * 62500) % freqref) << 4;
+ while (tmp2 >= freqref) {
+ tmp1++;
+ tmp2 -= freqref;
+ }
+ b43_radio_maskset(dev, B2063_PLL_JTAG_PLL_SG1, 0xFFE0, tmp1 >> 4);
+ b43_radio_maskset(dev, B2063_PLL_JTAG_PLL_SG2, 0xFE0F, tmp1 << 4);
+ b43_radio_maskset(dev, B2063_PLL_JTAG_PLL_SG2, 0xFFF0, tmp1 >> 16);
+ b43_radio_write(dev, B2063_PLL_JTAG_PLL_SG3, (tmp2 >> 8) & 0xFF);
+ b43_radio_write(dev, B2063_PLL_JTAG_PLL_SG4, tmp2 & 0xFF);
+
+ b43_radio_write(dev, B2063_PLL_JTAG_PLL_LF1, 0xB9);
+ b43_radio_write(dev, B2063_PLL_JTAG_PLL_LF2, 0x88);
+ b43_radio_write(dev, B2063_PLL_JTAG_PLL_LF3, 0x28);
+ b43_radio_write(dev, B2063_PLL_JTAG_PLL_LF4, 0x63);
+
+ tmp3 = ((41 * (val3 - 3000)) /1200) + 27;
+ tmp4 = lpphy_qdiv_roundup(132000 * tmp1, 8451, 16);
+
+ if ((tmp4 + tmp3 - 1) / tmp3 > 60) {
+ scale = 1;
+ tmp5 = ((tmp4 + tmp3) / (tmp3 << 1)) - 8;
+ } else {
+ scale = 0;
+ tmp5 = ((tmp4 + (tmp3 >> 1)) / tmp3) - 8;
+ }
+ b43_phy_maskset(dev, B2063_PLL_JTAG_PLL_CP2, 0xFFC0, tmp5);
+ b43_phy_maskset(dev, B2063_PLL_JTAG_PLL_CP2, 0xFFBF, scale << 6);
+
+ tmp6 = lpphy_qdiv_roundup(100 * val1, val3, 16);
+ tmp6 *= (tmp5 * 8) * (scale + 1);
+ if (tmp6 > 150)
+ tmp6 = 0;
+
+ b43_phy_maskset(dev, B2063_PLL_JTAG_PLL_CP3, 0xFFE0, tmp6);
+ b43_phy_maskset(dev, B2063_PLL_JTAG_PLL_CP3, 0xFFDF, scale << 5);
+
+ b43_phy_maskset(dev, B2063_PLL_JTAG_PLL_XTAL_12, 0xFFFB, 0x4);
+ if (crystal_freq > 26000000)
+ b43_phy_set(dev, B2063_PLL_JTAG_PLL_XTAL_12, 0x2);
+ else
+ b43_phy_mask(dev, B2063_PLL_JTAG_PLL_XTAL_12, 0xFD);
+
+ if (val1 == 45)
+ b43_phy_set(dev, B2063_PLL_JTAG_PLL_VCO1, 0x2);
+ else
+ b43_phy_mask(dev, B2063_PLL_JTAG_PLL_VCO1, 0xFD);
+
+ b43_phy_set(dev, B2063_PLL_SP2, 0x3);
+ udelay(1);
+ b43_phy_mask(dev, B2063_PLL_SP2, 0xFFFC);
+ lpphy_b2063_vco_calib(dev);
+ b43_radio_write(dev, B2063_COMM15, old_comm15);
+}
+
static int b43_lpphy_op_switch_channel(struct b43_wldev *dev,
unsigned int new_channel)
{
- //TODO
+ b43_write16(dev, B43_MMIO_CHANNEL, new_channel);
+
+ if (dev->phy.radio_ver == 0x2063) {
+ lpphy_b2063_tune(dev, new_channel);
+ } else {
+ lpphy_b2062_tune(dev, new_channel);
+ //TODO Japan filter
+ }
+
+ lpphy_adjust_gain_table(dev, channel2freq_lp(new_channel));
+
return 0;
}
-static unsigned int b43_lpphy_op_get_default_chan(struct b43_wldev *dev)
+static int b43_lpphy_op_init(struct b43_wldev *dev)
{
- if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ)
- return 1;
- return 36;
+ lpphy_read_band_sprom(dev); //FIXME should this be in prepare_structs?
+ lpphy_baseband_init(dev);
+ lpphy_radio_init(dev);
+ lpphy_calibrate_rc(dev);
+ b43_lpphy_op_switch_channel(dev, b43_lpphy_op_get_default_chan(dev));
+ lpphy_tx_pctl_init(dev);
+ lpphy_calibration(dev);
+ //TODO ACI init
+
+ return 0;
}
static void b43_lpphy_op_set_rx_antenna(struct b43_wldev *dev, int antenna)
--
1.6.2.4
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] b43: LP-PHY: Implement channel switching for rev2+/B2063 radio
2009-08-13 20:46 [PATCH] b43: LP-PHY: Implement channel switching for rev2+/B2063 radio Gábor Stefanik
@ 2009-08-14 20:16 ` Michael Buesch
0 siblings, 0 replies; 2+ messages in thread
From: Michael Buesch @ 2009-08-14 20:16 UTC (permalink / raw)
To: Gábor Stefanik
Cc: John Linville, Larry Finger, Broadcom Wireless, linux-wireless
On Thursday 13 August 2009 22:46:30 Gábor Stefanik wrote:
> Rev.2+/B2063 will now hopefully show some signs of life, though
> it won't work at full performance, as calibration is still missing.
>
> Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com>
ack
--
Greetings, Michael.
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2009-08-14 20:16 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2009-08-13 20:46 [PATCH] b43: LP-PHY: Implement channel switching for rev2+/B2063 radio Gábor Stefanik
2009-08-14 20:16 ` Michael Buesch
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).