* Broadcom card totally not visible for system (lspci)
@ 2010-03-30 16:56 Rafał Miłecki
2010-03-30 17:19 ` Larry Finger
0 siblings, 1 reply; 9+ messages in thread
From: Rafał Miłecki @ 2010-03-30 16:56 UTC (permalink / raw)
To: b43-dev, linux-wireless
[-- Attachment #1: Type: text/plain, Size: 1706 bytes --]
I've some polish user that has Medion (???) notebook with "BCM4306KFB
HS00328 P20 702910 M2" (citation from spec).
This card worked fine in Windows and few days ago user decided to
install openSUSE 11.2 (2.6.31.12). AFAIK he removed Windows and has
openSUSE now only.
The problem is that system does not detect his WiFi card at all. lspci shows:
00:00.0 Host bridge: ATI Technologies Inc AGP Bridge [IGP 320M] (rev 13)
00:01.0 PCI bridge: ATI Technologies Inc PCI Bridge [IGP 320M] (rev 01)
00:07.0 ISA bridge: ALi Corporation M1533/M1535/M1543 PCI to ISA
Bridge [Aladdin IV/V/V+]
00:08.0 Multimedia audio controller: ALi Corporation M5451 PCI AC-Link
Controller Audio Device (rev 02)
00:09.0 Modem: ALi Corporation M5457 AC'97 Modem Controller
00:0a.0 CardBus bridge: Texas Instruments PCI4410 PC card Cardbus
Controller (rev 02)
00:0a.1 FireWire (IEEE 1394): Texas Instruments PCI4410 FireWire
Controller (rev 02)
00:0d.0 USB Controller: NEC Corporation USB (rev 43)
00:0d.1 USB Controller: NEC Corporation USB (rev 43)
00:0d.2 USB Controller: NEC Corporation USB 2.0 (rev 04)
00:0e.0 Ethernet controller: Broadcom Corporation BCM4401 100Base-T (rev 01)
00:10.0 IDE interface: ALi Corporation M5229 IDE (rev c4)
00:11.0 Bridge: ALi Corporation M7101 Power Management Controller [PMU]
01:05.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility U1
You can find more logs on out polish forum:
http://forum.suse.pl/index.php/topic,22826.0/topicseen.html
He put dmesg on pastebin, which I prefer to just attach.
I've googled only one similar problem:
http://ubuntuforums.org/showthread.php?t=712272
Do you have any ideas what may this be?
--
Rafał
[-- Attachment #2: dmesg.log --]
[-- Type: text/x-log, Size: 77247 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.31.12-0.2-default (geeko@buildhost) (gcc version 4.4.1 [gcc-4_4-branch revision 150839] (SUSE Linux) ) #1 SMP 2010-03-16 21:25:39 +0100
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001bef0000 (usable)
[ 0.000000] BIOS-e820: 000000001bef0000 - 000000001beff000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001beff000 - 000000001bf00000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001bf00000 - 000000001c000000 (usable)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] last_pfn = 0x1c000 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CEFFF write-protect
[ 0.000000] CF000-DEFFF uncachable
[ 0.000000] DF000-DFFFF write-protect
[ 0.000000] E0000-E3FFF write-back
[ 0.000000] E4000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FF0000000 write-back
[ 0.000000] 1 base 010000000 mask FF8000000 write-back
[ 0.000000] 2 base 018000000 mask FFC000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable)
[ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009f800 (usable)
[ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000d0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000001bef0000 (usable)
[ 0.000000] modified: 000000001bef0000 - 000000001beff000 (ACPI data)
[ 0.000000] modified: 000000001beff000 - 000000001bf00000 (ACPI NVS)
[ 0.000000] modified: 000000001bf00000 - 000000001c000000 (usable)
[ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-000000001c000000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 001c000000 page 2M
[ 0.000000] kernel direct mapping tables up to 1c000000 @ 7000-c000
[ 0.000000] RAMDISK: 1b84f000 - 1bedf94d
[ 0.000000] ACPI: RSDP 000f7670 00014 (v00 ARIMA )
[ 0.000000] ACPI: RSDT 1befad18 0002C (v01 PTLTD RSDT 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 1befee17 00074 (v01 ARIMA W720-K7 06040000 PTL_ 000F4240)
[ 0.000000] ACPI: DSDT 1befad44 040D3 (v01 ARIMA W720-K7 06040000 MSFT 0100000D)
[ 0.000000] ACPI: FACS 1befffc0 00040
[ 0.000000] ACPI: SSDT 1befee8b 00175 (v01 PTLTD POWERNOW 06040000 LTP 00000001)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 448MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 1c000000
[ 0.000000] low ram: 0 - 1c000000
[ 0.000000] node 0 low ram: 00000000 - 1c000000
[ 0.000000] node 0 bootmap 00008000 - 0000b800
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 001c000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000200000 - 0000a183a8] TEXT DATA BSS ==> [0000200000 - 0000a183a8]
[ 0.000000] #4 [001b84f000 - 001bedf94d] RAMDISK ==> [001b84f000 - 001bedf94d]
[ 0.000000] #5 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
[ 0.000000] #6 [0000a19000 - 0000a1c0cd] BRK ==> [0000a19000 - 0000a1c0cd]
[ 0.000000] #7 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
[ 0.000000] #8 [0000008000 - 000000c000] BOOTMAP ==> [0000008000 - 000000c000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0001c000
[ 0.000000] HighMem 0x0001c000 -> 0x0001c000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[4] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000002
[ 0.000000] 0: 0x00000006 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0001bef0
[ 0.000000] 0: 0x0001bf00 -> 0x0001c000
[ 0.000000] On node 0 totalpages: 114571
[ 0.000000] free_area_init_node: node 0, pgdat c08a1020, node_mem_map c1000000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3963 pages, LIFO batch:0
[ 0.000000] Normal zone: 864 pages used for memmap
[ 0.000000] Normal zone: 109712 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] APIC: disable apic facility
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000
[ 0.000000] PM: Registered nosave memory: 00000000000d0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 000000001bef0000 - 000000001beff000
[ 0.000000] PM: Registered nosave memory: 000000001beff000 - 000000001bf00000
[ 0.000000] Allocating PCI resources starting at 1c000000 (gap: 1c000000:e3f80000)
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages at c1382000, static data 33148 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 113675
[ 0.000000] Kernel command line: root=/dev/disk/by-id/ata-WDC_WD1200BEVE-00UYT0_WD-WXH409A10923-part2 resume=/dev/disk/by-id/ata-WDC_WD1200BEVE-00UYT0_WD-WXH409A10923-part1 splash=silent quiet vga=0x317
[ 0.000000] bootsplash: silent mode.
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 438868k/458752k available (4131k kernel code, 19108k reserved, 2702k data, 460k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd34000 - 0xfffff000 (2860 kB)
[ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.000000] vmalloc : 0xdc800000 - 0xff3fe000 ( 555 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdc000000 ( 448 MB)
[ 0.000000] .init : 0xc08ad000 - 0xc0920000 ( 460 kB)
[ 0.000000] .data : 0xc0608df6 - 0xc08ac728 (2702 kB)
[ 0.000000] .text : 0xc0200000 - 0xc0608df6 (4131 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:256
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1855.000 MHz processor.
[ 0.000104] Console: colour dummy device 80x25
[ 0.000111] console [tty0] enabled
[ 0.000194] Calibrating delay loop (skipped), value calculated using timer frequency.. 3710.00 BogoMIPS (lpj=7420000)
[ 0.006996] kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved
[ 0.007108] Security Framework initialized
[ 0.007160] AppArmor: AppArmor initialized
[ 0.007188] Mount-cache hash table entries: 512
[ 0.007424] Initializing cgroup subsys ns
[ 0.007432] Initializing cgroup subsys cpuacct
[ 0.007439] Initializing cgroup subsys memory
[ 0.007449] Initializing cgroup subsys devices
[ 0.007454] Initializing cgroup subsys freezer
[ 0.007458] Initializing cgroup subsys net_cls
[ 0.007490] CPU: CLK_CTL MSR was 60071263. Reprogramming to 20071263
[ 0.007496] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.007500] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.007508] mce: CPU supports 4 MCE banks
[ 0.007542] Performance Counters: AMD PMU driver.
[ 0.007550] ------------[ cut here ]------------
[ 0.007569] WARNING: at /usr/src/packages/BUILD/kernel-default-2.6.31.12/linux-2.6.31/arch/x86/kernel/apic/apic.c:247 native_apic_write_dummy+0x53/0x70()
[ 0.007574] Hardware name: RAM 2000.
[ 0.007577] Modules linked in:
[ 0.007584] Pid: 0, comm: swapper Not tainted 2.6.31.12-0.2-default #1
[ 0.007587] Call Trace:
[ 0.007624] [<c02082aa>] try_stack_unwind+0x17a/0x1a0
[ 0.007634] [<c020706c>] dump_trace+0x6c/0x130
[ 0.007641] [<c0207e58>] show_trace_log_lvl+0x58/0x80
[ 0.007649] [<c0207ea6>] show_trace+0x26/0x40
[ 0.007659] [<c05fff9f>] dump_stack+0x79/0x91
[ 0.007669] [<c024f238>] warn_slowpath_common+0x78/0xc0
[ 0.007678] [<c024f2a1>] warn_slowpath_null+0x21/0x40
[ 0.007685] [<c021d883>] native_apic_write_dummy+0x53/0x70
[ 0.007698] [<c0210daa>] perf_counters_lapic_init+0x3a/0x60
[ 0.007709] [<c08b55ca>] init_hw_perf_counters+0x164/0x238
[ 0.007717] [<c08b5161>] identify_boot_cpu+0x21/0x23
[ 0.007725] [<c08b5343>] check_bugs+0x16/0x139
[ 0.007736] [<c08adcb1>] start_kernel+0x35a/0x37b
[ 0.007745] [<c08ad087>] i386_start_kernel+0x87/0x9f
[ 0.007764] ---[ end trace a7919e7f17c0a725 ]---
[ 0.007779] ... version: 0
[ 0.007782] ... bit width: 48
[ 0.007784] ... generic counters: 4
[ 0.007787] ... value mask: 0000ffffffffffff
[ 0.007790] ... max period: 00007fffffffffff
[ 0.007793] ... fixed-purpose counters: 0
[ 0.007796] ... counter mask: 000000000000000f
[ 0.007807] Checking 'hlt' instruction... OK.
[ 0.020579] SMP alternatives: switching to UP code
[ 0.026832] Freeing SMP alternatives: 15k freed
[ 0.026868] ACPI: Core revision 20090521
[ 0.040407] ACPI: setting ELCR to 0200 (from 0c20)
[ 0.044317] weird, boot CPU (#0) not listed by the BIOS.
[ 0.044326] SMP motherboard not detected.
[ 0.044331] Local APIC not detected. Using dummy APIC emulation.
[ 0.044334] SMP disabled
[ 0.044721] Brought up 1 CPUs
[ 0.044726] Total of 1 processors activated (3710.00 BogoMIPS).
[ 0.044748] CPU0 attaching NULL sched-domain.
[ 0.045029] devtmpfs: initialized
[ 0.045276] Booting paravirtualized kernel on bare hardware
[ 0.045567] regulator: core version 0.5
[ 0.045612] Time: 13:09:37 Date: 03/30/10
[ 0.045711] NET: Registered protocol family 16
[ 0.045909] ACPI: bus type pci registered
[ 0.046348] PCI: PCI BIOS revision 2.10 entry at 0xfd88e, last bus=1
[ 0.046352] PCI: Using configuration type 1 for base access
[ 0.047229] bio: create slab <bio-0> at 0
[ 0.048976] ACPI: EC: Enabling special treatment for EC from MSI.
[ 0.048980] ACPI: EC: Look up EC in DSDT
[ 0.055058] ACPI: Interpreter enabled
[ 0.055068] ACPI: (supports S0 S3 S4 S5)
[ 0.055101] ACPI: Using PIC for interrupt routing
[ 0.058274] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.068251] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
[ 0.068255] ACPI: EC: driver started in interrupt mode
[ 0.068500] ACPI: No dock devices found.
[ 0.068851] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.068924] pci 0000:00:00.0: reg 10 32bit mmio: [0xd4000000-0xd7ffffff]
[ 0.068933] pci 0000:00:00.0: reg 14 32bit mmio: [0xd0400000-0xd0400fff]
[ 0.068940] pci 0000:00:00.0: reg 18 io port: [0x8090-0x8093]
[ 0.069094] pci 0000:00:08.0: reg 10 io port: [0x8400-0x84ff]
[ 0.069102] pci 0000:00:08.0: reg 14 32bit mmio: [0xd0006000-0xd0006fff]
[ 0.069134] pci 0000:00:08.0: supports D1 D2
[ 0.069138] pci 0000:00:08.0: PME# supported from D2 D3hot D3cold
[ 0.069144] pci 0000:00:08.0: PME# disabled
[ 0.069174] pci 0000:00:09.0: reg 10 32bit mmio: [0xd0007000-0xd0007fff]
[ 0.069182] pci 0000:00:09.0: reg 14 io port: [0x8800-0x88ff]
[ 0.069212] pci 0000:00:09.0: PME# supported from D3hot D3cold
[ 0.069217] pci 0000:00:09.0: PME# disabled
[ 0.069249] pci 0000:00:0a.0: reg 10 32bit mmio: [0xffbfe000-0xffbfefff]
[ 0.069266] pci 0000:00:0a.0: supports D1 D2
[ 0.069269] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot
[ 0.069274] pci 0000:00:0a.0: PME# disabled
[ 0.069306] pci 0000:00:0a.1: reg 10 32bit mmio: [0xd000a000-0xd000a7ff]
[ 0.069314] pci 0000:00:0a.1: reg 14 32bit mmio: [0xd0000000-0xd0003fff]
[ 0.069350] pci 0000:00:0a.1: supports D2
[ 0.069353] pci 0000:00:0a.1: PME# supported from D2 D3hot
[ 0.069358] pci 0000:00:0a.1: PME# disabled
[ 0.069396] pci 0000:00:0d.0: reg 10 32bit mmio: [0xd0008000-0xd0008fff]
[ 0.069429] pci 0000:00:0d.0: supports D1 D2
[ 0.069433] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.069437] pci 0000:00:0d.0: PME# disabled
[ 0.069466] pci 0000:00:0d.1: reg 10 32bit mmio: [0xd0009000-0xd0009fff]
[ 0.069500] pci 0000:00:0d.1: supports D1 D2
[ 0.069503] pci 0000:00:0d.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.069508] pci 0000:00:0d.1: PME# disabled
[ 0.069538] pci 0000:00:0d.2: reg 10 32bit mmio: [0xd000a800-0xd000a8ff]
[ 0.069572] pci 0000:00:0d.2: supports D1 D2
[ 0.069575] pci 0000:00:0d.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.069580] pci 0000:00:0d.2: PME# disabled
[ 0.069613] pci 0000:00:0e.0: reg 10 32bit mmio: [0xd0004000-0xd0005fff]
[ 0.069635] pci 0000:00:0e.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.069650] pci 0000:00:0e.0: supports D1 D2
[ 0.069653] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.069658] pci 0000:00:0e.0: PME# disabled
[ 0.069700] pci 0000:00:10.0: reg 20 io port: [0x8080-0x808f]
[ 0.069771] pci 0000:00:11.0: quirk: region 8000-803f claimed by ali7101 ACPI
[ 0.069776] pci 0000:00:11.0: quirk: region 8040-805f claimed by ali7101 SMB
[ 0.069836] pci 0000:01:05.0: reg 10 32bit mmio: [0xe0000000-0xefffffff]
[ 0.069844] pci 0000:01:05.0: reg 14 io port: [0x9000-0x90ff]
[ 0.069851] pci 0000:01:05.0: reg 18 32bit mmio: [0xd0100000-0xd010ffff]
[ 0.069867] pci 0000:01:05.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.069886] pci 0000:01:05.0: supports D1 D2
[ 0.069918] pci 0000:00:01.0: bridge io port: [0x9000-0x9fff]
[ 0.069923] pci 0000:00:01.0: bridge 32bit mmio: [0xd0100000-0xd01fffff]
[ 0.069929] pci 0000:00:01.0: bridge 32bit mmio pref: [0xe0000000-0xefffffff]
[ 0.069953] pci_bus 0000:00: on NUMA node 0
[ 0.069961] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.070055] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 0.073503] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
[ 0.073709] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 *11 12)
[ 0.073910] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 *10 11 12)
[ 0.074111] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 10 *11 12)
[ 0.074314] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
[ 0.074517] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
[ 0.074721] ACPI: PCI Interrupt Link [LNK6] (IRQs 3 4 *5 6 7 10 11 12)
[ 0.074923] ACPI: PCI Interrupt Link [LNK7] (IRQs 3 4 5 6 7 10 *11 12)
[ 0.075124] ACPI: PCI Interrupt Link [LNK8] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
[ 0.075450] SCSI subsystem initialized
[ 0.075674] usbcore: registered new interface driver usbfs
[ 0.075702] usbcore: registered new interface driver hub
[ 0.075761] usbcore: registered new device driver usb
[ 0.075854] PCI: Using ACPI for IRQ routing
[ 0.078641] AppArmor: AppArmor Filesystem Enabled
[ 0.078694] pnp: PnP ACPI init
[ 0.078739] ACPI: bus type pnp registered
[ 0.080463] pnp 00:08: mem resource (0xe8400000-0xe8400fff) overlaps 0000:00:01.0 BAR 15 (0xe0000000-0xefffffff), disabling
[ 0.080483] pnp 00:08: mem resource (0xe8400000-0xe8400fff) overlaps 0000:01:05.0 BAR 0 (0xe0000000-0xefffffff), disabling
[ 0.095168] pnp: PnP ACPI: found 10 devices
[ 0.095172] ACPI: ACPI bus type pnp unregistered
[ 0.095179] PnPBIOS: Disabled by ACPI PNP
[ 0.095209] system 00:07: ioport range 0x40b-0x40b has been reserved
[ 0.095214] system 00:07: ioport range 0x480-0x48f has been reserved
[ 0.095218] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 0.095222] system 00:07: ioport range 0x4d6-0x4d6 has been reserved
[ 0.095227] system 00:07: ioport range 0x8000-0x807f could not be reserved
[ 0.095231] system 00:07: ioport range 0xf500-0xf503 has been reserved
[ 0.095236] system 00:07: ioport range 0x200-0x207 has been reserved
[ 0.095240] system 00:07: ioport range 0x3f2-0x3f5 has been reserved
[ 0.095244] system 00:07: ioport range 0x3f7-0x3f7 has been reserved
[ 0.095253] system 00:08: iomem range 0x0-0x9ffff could not be reserved
[ 0.095259] system 00:08: iomem range 0xdc000-0xdffff could not be reserved
[ 0.095264] system 00:08: iomem range 0xe0000-0xfffff could not be reserved
[ 0.095268] system 00:08: iomem range 0x100000-0x1bffffff could not be reserved
[ 0.095273] system 00:08: iomem range 0xfff80000-0xffffffff has been reserved
[ 0.095277] system 00:08: iomem range 0xc0000-0xcffff could not be reserved
[ 0.095282] system 00:08: iomem range 0xf4400000-0xf4400fff has been reserved
[ 0.095286] system 00:08: iomem range 0xf0400000-0xf0400fff has been reserved
[ 0.095291] system 00:08: iomem range 0xd0400000-0xd0400fff has been reserved
[ 0.130309] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.130314] pci 0000:00:01.0: IO window: 0x9000-0x9fff
[ 0.130323] pci 0000:00:01.0: MEM window: 0xd0100000-0xd01fffff
[ 0.130329] pci 0000:00:01.0: PREFETCH window: 0xe0000000-0xefffffff
[ 0.130336] pci 0000:00:0a.0: CardBus bridge, secondary bus 0000:02
[ 0.130340] pci 0000:00:0a.0: IO window: 0x001000-0x0010ff
[ 0.130346] pci 0000:00:0a.0: IO window: 0x001400-0x0014ff
[ 0.130351] pci 0000:00:0a.0: PREFETCH window: 0x1c000000-0x1fffffff
[ 0.130357] pci 0000:00:0a.0: MEM window: 0x20000000-0x23ffffff
[ 0.130444] pci 0000:00:0a.0: power state changed by ACPI to D0
[ 0.130728] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 10
[ 0.130733] PCI: setting IRQ 10 as level-triggered
[ 0.130740] pci 0000:00:0a.0: PCI INT A -> Link[LNK2] -> GSI 10 (level, low) -> IRQ 10
[ 0.130753] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.130757] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.130762] pci_bus 0000:01: resource 0 io: [0x9000-0x9fff]
[ 0.130766] pci_bus 0000:01: resource 1 mem: [0xd0100000-0xd01fffff]
[ 0.130769] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xefffffff]
[ 0.130774] pci_bus 0000:02: resource 0 io: [0x1000-0x10ff]
[ 0.130777] pci_bus 0000:02: resource 1 io: [0x1400-0x14ff]
[ 0.130781] pci_bus 0000:02: resource 2 pref mem [0x1c000000-0x1fffffff]
[ 0.130785] pci_bus 0000:02: resource 3 mem: [0x20000000-0x23ffffff]
[ 0.130867] NET: Registered protocol family 2
[ 0.131028] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.131513] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.131880] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.132245] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.132251] TCP reno registered
[ 0.132368] NET: Registered protocol family 1
[ 0.132496] Unpacking initramfs...
[ 0.365598] Freeing initrd memory: 6722k freed
[ 0.383180] Scanning for low memory corruption every 60 seconds
[ 0.383508] audit: initializing netlink socket (disabled)
[ 0.383567] type=2000 audit(1269954577.380:1): initialized
[ 0.392455] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.392625] VFS: Disk quotas dquot_6.5.2
[ 0.392681] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.392849] msgmni has been set to 217
[ 0.393010] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[ 0.393016] io scheduler noop registered
[ 0.393020] io scheduler anticipatory registered
[ 0.393023] io scheduler deadline registered
[ 0.393036] io scheduler cfq registered (default)
[ 0.393157] pci 0000:00:00.0: ATI Northbridge, reserving I/O ports 0x3b0 to 0x3bb
[ 0.393183] pci 0000:00:07.0: Activating ISA DMA hang workarounds
[ 0.393259] pci 0000:01:05.0: Boot video device
[ 0.393402] pci-stub: invalid id string ""
[ 0.393587] vesafb: framebuffer at 0xe0000000, mapped to 0xdc880000, using 3072k, total 65472k
[ 0.393592] vesafb: mode is 1024x768x16, linelength=2048, pages=41
[ 0.393596] vesafb: protected mode interface info at c000:511f
[ 0.393600] vesafb: pmi: set display start = c00c51b3, set palette = c00c51ff
[ 0.393603] vesafb: pmi: ports = 9010 9016 9054 9038 903c 905c 9000 9004 90b0 90b2 90b4
[ 0.393613] vesafb: scrolling: redraw
[ 0.393619] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 0.394266] bootsplash 3.1.6-2004/03/31: looking for picture...
[ 0.412292] bootsplash: silentjpeg size 100573 bytes
[ 0.436790] bootsplash: ...found (1024x768, 27393 bytes, v3).
[ 0.503866] Console: switching to colour frame buffer device 124x44
[ 0.571578] fb0: VESA VGA frame buffer device
[ 0.571721] isapnp: Scanning for PnP cards...
[ 0.632118] Switched to high resolution mode on CPU 0
[ 0.838813] isapnp: No Plug & Play device found
[ 0.841064] Non-volatile memory driver v1.3
[ 0.841069] Linux agpgart interface v0.103
[ 0.841121] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[ 0.842202] ACPI: PCI Interrupt Link [LNK6] enabled at IRQ 5
[ 0.842208] PCI: setting IRQ 5 as level-triggered
[ 0.842215] serial 0000:00:09.0: PCI INT A -> Link[LNK6] -> GSI 5 (level, low) -> IRQ 5
[ 0.842227] serial 0000:00:09.0: PCI INT A disabled
[ 0.842386] Fixed MDIO Bus: probed
[ 0.842460] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 0.844293] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.844307] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.844402] mice: PS/2 mouse device common for all mice
[ 0.844652] cpuidle: using governor ladder
[ 0.844657] cpuidle: using governor menu
[ 0.919906] TCP cubic registered
[ 0.919994] Using IPI No-Shortcut mode
[ 0.920203] PM: Checking image partition /dev/disk/by-id/ata-WDC_WD1200BEVE-00UYT0_WD-WXH409A10923-part1
[ 0.936736] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.938079] atkbd.c: Spurious ACK on isa0060/serio0. Some program might be trying access hardware directly.
[ 1.568573] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x236eb3, caps: 0x904713/0x10008
[ 1.600797] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input1
[ 1.603157] PM: Resume from disk failed.
[ 1.603204] registered taskstats version 1
[ 1.603401] Magic number: 2:231:181
[ 1.603664] Freeing unused kernel memory: 460k freed
[ 1.604671] Write protecting the kernel text: 4132k
[ 1.604752] Write protecting the kernel read-only data: 2488k
[ 1.685576] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.685595] ACPI: Thermal Zone [THRM] (31 C)
[ 1.714233] libata version 3.00 loaded.
[ 1.717662] pata_ali 0000:00:10.0: can't derive routing for PCI INT A
[ 1.717793] pata_ali 0000:00:10.0: setting latency timer to 64
[ 1.718031] scsi0 : pata_ali
[ 1.718222] scsi1 : pata_ali
[ 1.719655] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8080 irq 14
[ 1.719661] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8088 irq 15
[ 1.929718] ata1.00: ATA-7: WDC WD1200BEVE-00UYT0, 01.04A01, max UDMA/100
[ 1.929724] ata1.00: 234441648 sectors, multi 16: LBA48
[ 1.944926] ata1.00: configured for UDMA/100
[ 1.945191] scsi 0:0:0:0: Direct-Access ATA WDC WD1200BEVE-0 01.0 PQ: 0 ANSI: 5
[ 1.945547] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 1.945635] sd 0:0:0:0: [sda] Write Protect is off
[ 1.945640] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.945684] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.945913] sda: sda1 sda2 sda3
[ 1.958118] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.124264] ata2.00: ATAPI: _NEC DVD+/-RW ND-6500A, 2.40, max UDMA/33
[ 2.124291] ata2.00: WARNING: ATAPI DMA disabled for reliablity issues. It can be enabled
[ 2.124295] ata2.00: WARNING: via pata_ali.atapi_dma modparam or corresponding sysfs node.
[ 2.172196] ata2.00: configured for UDMA/33
[ 2.224674] scsi 1:0:0:0: CD-ROM _NEC DVD+-RW ND-6500A 2.40 PQ: 0 ANSI: 5
[ 2.250611] Uniform Multi-Platform E-IDE driver
[ 2.267245] Marking TSC unstable due to TSC halts in idle
[ 2.267315] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 2.267384] processor LNXCPU:00: registered as cooling_device0
[ 2.282413] udev: starting version 146
[ 2.397066] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 2.397113] rtc0: alarms up to one day, y3k, 114 bytes nvram
[ 2.424469] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.485425] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11
[ 2.485437] PCI: setting IRQ 11 as level-triggered
[ 2.485447] ehci_hcd 0000:00:0d.2: PCI INT C -> Link[LNK1] -> GSI 11 (level, low) -> IRQ 11
[ 2.485510] ehci_hcd 0000:00:0d.2: EHCI Host Controller
[ 2.485604] ehci_hcd 0000:00:0d.2: new USB bus registered, assigned bus number 1
[ 2.508310] ehci_hcd 0000:00:0d.2: irq 11, io mem 0xd000a800
[ 2.520144] ehci_hcd 0000:00:0d.2: USB 2.0 started, EHCI 1.00
[ 2.520236] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.520241] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.520246] usb usb1: Product: EHCI Host Controller
[ 2.520249] usb usb1: Manufacturer: Linux 2.6.31.12-0.2-default ehci_hcd
[ 2.520253] usb usb1: SerialNumber: 0000:00:0d.2
[ 2.520493] usb usb1: configuration #1 chosen from 1 choice
[ 2.520555] hub 1-0:1.0: USB hub found
[ 2.520591] hub 1-0:1.0: 5 ports detected
[ 2.526893] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.526978] ohci_hcd 0000:00:0d.0: PCI INT A -> Link[LNK1] -> GSI 11 (level, low) -> IRQ 11
[ 2.527014] ohci_hcd 0000:00:0d.0: OHCI Host Controller
[ 2.527052] ohci_hcd 0000:00:0d.0: new USB bus registered, assigned bus number 2
[ 2.527094] ohci_hcd 0000:00:0d.0: irq 11, io mem 0xd0008000
[ 2.609890] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.609902] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.609907] usb usb2: Product: OHCI Host Controller
[ 2.609910] usb usb2: Manufacturer: Linux 2.6.31.12-0.2-default ohci_hcd
[ 2.609914] usb usb2: SerialNumber: 0000:00:0d.0
[ 2.610176] usb usb2: configuration #1 chosen from 1 choice
[ 2.610237] hub 2-0:1.0: USB hub found
[ 2.610264] hub 2-0:1.0: 3 ports detected
[ 2.610394] ohci_hcd 0000:00:0d.1: PCI INT B -> Link[LNK1] -> GSI 11 (level, low) -> IRQ 11
[ 2.610453] ohci_hcd 0000:00:0d.1: OHCI Host Controller
[ 2.610471] ohci_hcd 0000:00:0d.1: new USB bus registered, assigned bus number 3
[ 2.610514] ohci_hcd 0000:00:0d.1: irq 11, io mem 0xd0009000
[ 2.693892] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.693903] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.693907] usb usb3: Product: OHCI Host Controller
[ 2.693910] usb usb3: Manufacturer: Linux 2.6.31.12-0.2-default ohci_hcd
[ 2.693914] usb usb3: SerialNumber: 0000:00:0d.1
[ 2.694196] usb usb3: configuration #1 chosen from 1 choice
[ 2.694256] hub 3-0:1.0: USB hub found
[ 2.694276] hub 3-0:1.0: 2 ports detected
[ 2.997276] PM: Marking nosave pages: 0000000000002000 - 0000000000006000
[ 2.997289] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[ 2.997294] PM: Marking nosave pages: 000000001bef0000 - 000000001bf00000
[ 2.997297] PM: Basic memory bitmaps created
[ 3.005601] PM: Basic memory bitmaps freed
[ 3.022917] PM: Starting manual resume from disk
[ 3.022926] PM: Resume from partition 8:1
[ 3.022929] PM: Checking hibernation image.
[ 3.023353] PM: Resume from disk failed.
[ 3.080088] usb 2-1: new low speed USB device using ohci_hcd and address 2
[ 3.294995] usb 2-1: New USB device found, idVendor=09da, idProduct=000e
[ 3.295006] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.295010] usb 2-1: Product: PS/2+USB Mouse
[ 3.295013] usb 2-1: Manufacturer: A4Tech
[ 3.295274] usb 2-1: configuration #1 chosen from 1 choice
[ 3.319430] usbcore: registered new interface driver hiddev
[ 3.325622] input: A4Tech PS/2+USB Mouse as /devices/pci0000:00/0000:00:0d.0/usb2/2-1/2-1:1.0/input/input2
[ 3.325847] generic-usb 0003:09DA:000E.0001: input,hidraw0: USB HID v1.10 Mouse [A4Tech PS/2+USB Mouse] on usb-0000:00:0d.0-1/input0
[ 3.325890] usbcore: registered new interface driver usbhid
[ 3.325896] usbhid: v2.6:USB HID core driver
[ 3.712077] EXT4-fs (sda2): barriers enabled
[ 3.799200] kjournald2 starting: pid 218, dev sda2:8, commit interval 5 seconds
[ 3.799631] EXT4-fs (sda2): internal journal on sda2:8
[ 3.799638] EXT4-fs (sda2): delayed allocation enabled
[ 3.799643] EXT4-fs: file extents enabled
[ 3.801093] EXT4-fs: mballoc enabled
[ 3.801128] EXT4-fs (sda2): mounted filesystem with ordered data mode
[ 6.169676] preloadtrace: systemtap: 1.0/0.142, base: dd068000, memory: 34800+77804+6568+13600 data+text+ctx+net, probes: 34
[ 8.035888] udev: starting version 146
[ 8.077050] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 8.077176] ACPI: Power Button [PWRF]
[ 8.077264] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input4
[ 8.077304] ACPI: Sleep Button [SLPF]
[ 8.077376] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5
[ 8.077419] ACPI: Sleep Button [SLPB]
[ 8.077511] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input6
[ 8.077553] ACPI: Power Button [PWRB]
[ 8.077627] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input7
[ 8.111027] pci 0000:00:11.0: enabling device (0000 -> 0001)
[ 8.111179] ALi_M1535: initialized. timeout=60 sec (nowayout=0)
[ 8.111990] alim7101_wdt: Steve Hill <steve@navaho.co.uk>.
[ 8.112003] alim7101_wdt: Detected old alim7101 revision 'a1d'. If this is a cobalt board, set the 'use_gpio' module parameter.
[ 8.177910] ACPI: Lid Switch [LID]
[ 8.186164] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 8.187799] agpgart-ati 0000:00:00.0: Ati IGP320/M chipset
[ 8.197159] agpgart-ati 0000:00:00.0: AGP aperture is 64M @ 0xd4000000
[ 8.232633] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 8.284004] ACPI: Battery Slot [BAT0] (battery absent)
[ 8.309877] ACPI: AC Adapter [AC] (on-line)
[ 8.419940] ohci1394 0000:00:0a.1: PCI INT A -> Link[LNK2] -> GSI 10 (level, low) -> IRQ 10
[ 8.466953] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 8.467012] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ 8.531295] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 8.536672] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[10] MMIO=[d000a000-d000a7ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 8.619547] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 8.619561] Uniform CD-ROM driver Revision: 3.20
[ 8.619817] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 8.627118] ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 11
[ 8.627137] b44 0000:00:0e.0: PCI INT A -> Link[LNK3] -> GSI 11 (level, low) -> IRQ 11
[ 8.628278] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:09/device:0a/input/input9
[ 8.628475] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 8.695269] ssb: Sonics Silicon Backplane found on PCI device 0000:00:0e.0
[ 8.695352] b44.c:v2.0
[ 8.714414] eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:03:25:0b:d7:72
[ 8.754459] yenta_cardbus 0000:00:0a.0: CardBus bridge found [161f:2029]
[ 8.754519] yenta_cardbus 0000:00:0a.0: Enabling burst memory read transactions
[ 8.754526] yenta_cardbus 0000:00:0a.0: Using CSCINT to route CSC interrupts to PCI
[ 8.754530] yenta_cardbus 0000:00:0a.0: Routing CardBus interrupts to PCI
[ 8.754537] yenta_cardbus 0000:00:0a.0: TI: mfunc 0x01001c00, devctl 0x64
[ 8.805603] parport_pc 00:09: disabled
[ 8.805630] parport_pc: probe of 00:09 failed with error -22
[ 8.889278] ppdev: user-space parallel port driver
[ 8.984694] yenta_cardbus 0000:00:0a.0: ISA IRQ mask 0x00f8, PCI irq 10
[ 8.984704] yenta_cardbus 0000:00:0a.0: Socket status: 30000006
[ 9.241477] ACPI: PCI Interrupt Link [LNK7] enabled at IRQ 11
[ 9.241490] ALI 5451 0000:00:08.0: PCI INT A -> Link[LNK7] -> GSI 11 (level, low) -> IRQ 11
[ 9.270209] alim7101_wdt: Steve Hill <steve@navaho.co.uk>.
[ 9.270242] alim7101_wdt: Detected old alim7101 revision 'a1d'. If this is a cobalt board, set the 'use_gpio' module parameter.
[ 9.289261] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[ 9.291922] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
[ 9.302393] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 9.303360] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 9.305240] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 9.888296] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00032521190128e3]
[ 14.028053] ALSA /usr/src/packages/BUILD/kernel-default-2.6.31.12/linux-2.6.31/sound/pci/ac97/ac97_codec.c:2064: AC'97 1 does not respond - RESET
[ 14.044043] ALSA /usr/src/packages/BUILD/kernel-default-2.6.31.12/linux-2.6.31/sound/pci/ac97/ac97_codec.c:2073: AC'97 1 access is not valid [0xffffffff], removing mixer.
[ 14.044079] ALSA /usr/src/packages/BUILD/kernel-default-2.6.31.12/linux-2.6.31/sound/pci/ali5451/ali5451.c:1932: ali mixer 1 creating error.
[ 14.404337] Adding 2104472k swap on /dev/sda1. Priority:-1 extents:1 across:2104472k
[ 14.938002] device-mapper: uevent: version 1.0.3
[ 14.946188] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 19.859874] loop: module loaded
[ 23.138670] EXT4-fs (sda3): barriers enabled
[ 23.473645] kjournald2 starting: pid 585, dev sda3:8, commit interval 5 seconds
[ 23.474081] EXT4-fs (sda3): internal journal on sda3:8
[ 23.474088] EXT4-fs (sda3): delayed allocation enabled
[ 23.474093] EXT4-fs: file extents enabled
[ 23.490258] EXT4-fs: mballoc enabled
[ 23.490295] EXT4-fs (sda3): mounted filesystem with ordered data mode
[ 23.808666] fuse init (API version 7.12)
[ 26.748517] type=1505 audit(1269954603.748:2): operation="profile_load" pid=973 name=/bin/ping
[ 26.812440] type=1505 audit(1269954603.812:3): operation="profile_load" pid=974 name=/sbin/klogd
[ 26.936501] type=1505 audit(1269954603.936:4): operation="profile_load" pid=975 name=/sbin/syslog-ng
[ 27.079829] type=1505 audit(1269954604.076:5): operation="profile_load" pid=976 name=/sbin/syslogd
[ 27.208724] type=1505 audit(1269954604.208:6): operation="profile_load" pid=977 name=/usr/sbin/avahi-daemon
[ 27.325519] type=1505 audit(1269954604.324:7): operation="profile_load" pid=978 name=/usr/sbin/identd
[ 27.445270] type=1505 audit(1269954604.444:8): operation="profile_load" pid=979 name=/usr/sbin/mdnsd
[ 27.578756] type=1505 audit(1269954604.576:9): operation="profile_load" pid=980 name=/usr/sbin/nscd
[ 27.775098] type=1505 audit(1269954604.772:10): operation="profile_load" pid=981 name=/usr/sbin/ntpd
[ 27.878332] type=1505 audit(1269954604.876:11): operation="profile_load" pid=982 name=/usr/sbin/traceroute
[ 28.086163] cfg80211: Calling CRDA to update world regulatory domain
[ 28.127605] Broadcom 43xx-legacy driver loaded [ Features: PLID, Firmware-ID: FW10 ]
[ 29.798736] powernow-k8: Processor cpuid 6a0 not supported
[ 29.822132] powernow: PowerNOW! Technology present. Can scale: frequency and voltage.
[ 29.829652] powernow: No PST tables match this cpuid (0x7a0)
[ 29.829659] powernow: This is indicative of a broken BIOS.
[ 29.829666] powernow: Trying ACPI perflib
[ 29.829790] powernow: Minimum speed 530 MHz. Maximum speed 1855 MHz.
[ 30.714226] pci 0000:01:05.0: PCI INT A -> Link[LNK2] -> GSI 10 (level, low) -> IRQ 10
[ 30.811062] [drm] Initialized drm 1.1.0 20060810
[ 30.905245] [drm] Initialized radeon 1.31.0 20080528 for 0000:01:05.0 on minor 0
[ 31.186315] agpgart-ati 0000:00:00.0: AGP 2.0 bridge
[ 31.186363] agpgart-ati 0000:00:00.0: putting AGP V2 device into 4x mode
[ 31.186421] pci 0000:01:05.0: putting AGP V2 device into 4x mode
[ 31.328775] [drm] Setting GART location based on new memory map
[ 31.328805] [drm] Loading R100 Microcode
[ 31.328861] [drm] writeback test succeeded in 1 usecs
[ 32.620092] Clocksource tsc unstable (delta = -123030509 ns)
[ 34.816252] b44: eth0: Link is up at 100 Mbps, full duplex.
[ 34.816274] b44: eth0: Flow control is off for TX and off for RX.
[ 37.531257] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
[ 38.464959] NET: Registered protocol family 17
[ 69.790217] bootsplash: status on console 0 changed to on
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Broadcom card totally not visible for system (lspci)
2010-03-30 16:56 Broadcom card totally not visible for system (lspci) Rafał Miłecki
@ 2010-03-30 17:19 ` Larry Finger
2010-03-30 17:31 ` Rafał Miłecki
2010-03-31 6:39 ` Holger Schurig
0 siblings, 2 replies; 9+ messages in thread
From: Larry Finger @ 2010-03-30 17:19 UTC (permalink / raw)
To: Rafał Miłecki; +Cc: b43-dev, linux-wireless
On 03/30/2010 11:56 AM, Rafał Miłecki wrote:
> I've some polish user that has Medion (???) notebook with "BCM4306KFB
> HS00328 P20 702910 M2" (citation from spec).
>
> This card worked fine in Windows and few days ago user decided to
> install openSUSE 11.2 (2.6.31.12). AFAIK he removed Windows and has
> openSUSE now only.
>
> The problem is that system does not detect his WiFi card at all. lspci shows:
> 00:00.0 Host bridge: ATI Technologies Inc AGP Bridge [IGP 320M] (rev 13)
> 00:01.0 PCI bridge: ATI Technologies Inc PCI Bridge [IGP 320M] (rev 01)
> 00:07.0 ISA bridge: ALi Corporation M1533/M1535/M1543 PCI to ISA
> Bridge [Aladdin IV/V/V+]
> 00:08.0 Multimedia audio controller: ALi Corporation M5451 PCI AC-Link
> Controller Audio Device (rev 02)
> 00:09.0 Modem: ALi Corporation M5457 AC'97 Modem Controller
> 00:0a.0 CardBus bridge: Texas Instruments PCI4410 PC card Cardbus
> Controller (rev 02)
> 00:0a.1 FireWire (IEEE 1394): Texas Instruments PCI4410 FireWire
> Controller (rev 02)
> 00:0d.0 USB Controller: NEC Corporation USB (rev 43)
> 00:0d.1 USB Controller: NEC Corporation USB (rev 43)
> 00:0d.2 USB Controller: NEC Corporation USB 2.0 (rev 04)
> 00:0e.0 Ethernet controller: Broadcom Corporation BCM4401 100Base-T (rev 01)
> 00:10.0 IDE interface: ALi Corporation M5229 IDE (rev c4)
> 00:11.0 Bridge: ALi Corporation M7101 Power Management Controller [PMU]
> 01:05.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility U1
>
> Do you have any ideas what may this be?
There are only two reasons for lspci not to list the device:
(1) It is disabled in the BIOS.
(2) It is defective or not plugged in.
No. 1 is checked in the BIOS setup when booting. If nothing found there, and
re-seating the board does not help, then it is time for a new card.
If some device is not seen in lspci or lsusb, then it does not exist for the
operating system.
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Broadcom card totally not visible for system (lspci)
2010-03-30 17:19 ` Larry Finger
@ 2010-03-30 17:31 ` Rafał Miłecki
2010-03-30 17:48 ` Larry Finger
2010-03-31 6:39 ` Holger Schurig
1 sibling, 1 reply; 9+ messages in thread
From: Rafał Miłecki @ 2010-03-30 17:31 UTC (permalink / raw)
To: Larry Finger; +Cc: b43-dev, linux-wireless
W dniu 30 marca 2010 19:19 użytkownik Larry Finger
<Larry.Finger@lwfinger.net> napisał:
> On 03/30/2010 11:56 AM, Rafał Miłecki wrote:
>> I've some polish user that has Medion (???) notebook with "BCM4306KFB
>> HS00328 P20 702910 M2" (citation from spec).
>>
>> This card worked fine in Windows and few days ago user decided to
>> install openSUSE 11.2 (2.6.31.12). AFAIK he removed Windows and has
>> openSUSE now only.
>>
>> The problem is that system does not detect his WiFi card at all. lspci shows:
>> 00:00.0 Host bridge: ATI Technologies Inc AGP Bridge [IGP 320M] (rev 13)
>> 00:01.0 PCI bridge: ATI Technologies Inc PCI Bridge [IGP 320M] (rev 01)
>> 00:07.0 ISA bridge: ALi Corporation M1533/M1535/M1543 PCI to ISA
>> Bridge [Aladdin IV/V/V+]
>> 00:08.0 Multimedia audio controller: ALi Corporation M5451 PCI AC-Link
>> Controller Audio Device (rev 02)
>> 00:09.0 Modem: ALi Corporation M5457 AC'97 Modem Controller
>> 00:0a.0 CardBus bridge: Texas Instruments PCI4410 PC card Cardbus
>> Controller (rev 02)
>> 00:0a.1 FireWire (IEEE 1394): Texas Instruments PCI4410 FireWire
>> Controller (rev 02)
>> 00:0d.0 USB Controller: NEC Corporation USB (rev 43)
>> 00:0d.1 USB Controller: NEC Corporation USB (rev 43)
>> 00:0d.2 USB Controller: NEC Corporation USB 2.0 (rev 04)
>> 00:0e.0 Ethernet controller: Broadcom Corporation BCM4401 100Base-T (rev 01)
>> 00:10.0 IDE interface: ALi Corporation M5229 IDE (rev c4)
>> 00:11.0 Bridge: ALi Corporation M7101 Power Management Controller [PMU]
>> 01:05.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility U1
>>
>> Do you have any ideas what may this be?
>
> There are only two reasons for lspci not to list the device:
>
> (1) It is disabled in the BIOS.
Is this possible it's disabled in BIOS by default and needs execution
of some ACPI command or sth to make it work?
Yeah, trying to find some other reason than faulty WiFi... It's weird
it was working fine "before a moment" on Windows.
--
Rafał
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Broadcom card totally not visible for system (lspci)
2010-03-30 17:31 ` Rafał Miłecki
@ 2010-03-30 17:48 ` Larry Finger
2010-03-30 19:02 ` Pavel Roskin
0 siblings, 1 reply; 9+ messages in thread
From: Larry Finger @ 2010-03-30 17:48 UTC (permalink / raw)
To: Rafał Miłecki; +Cc: b43-dev, linux-wireless
On 03/30/2010 12:31 PM, Rafał Miłecki wrote:
>
> Is this possible it's disabled in BIOS by default and needs execution
> of some ACPI command or sth to make it work?
>
> Yeah, trying to find some other reason than faulty WiFi... It's weird
> it was working fine "before a moment" on Windows.
Winblows can fiddle with the "Wake-on-LAN" setting in the BIOS, but AFAIK, the
BCM4306 does not have this capability. If the BIOS has that setting, it should
be turned off.
Larry
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Broadcom card totally not visible for system (lspci)
2010-03-30 17:48 ` Larry Finger
@ 2010-03-30 19:02 ` Pavel Roskin
2010-03-30 19:06 ` Rafał Miłecki
2010-03-30 19:29 ` Johannes Berg
0 siblings, 2 replies; 9+ messages in thread
From: Pavel Roskin @ 2010-03-30 19:02 UTC (permalink / raw)
To: Larry Finger; +Cc: Rafał Miłecki, b43-dev, linux-wireless
On Tue, 2010-03-30 at 12:48 -0500, Larry Finger wrote:
> On 03/30/2010 12:31 PM, Rafał Miłecki wrote:
> >
> > Is this possible it's disabled in BIOS by default and needs execution
> > of some ACPI command or sth to make it work?
> >
> > Yeah, trying to find some other reason than faulty WiFi... It's weird
> > it was working fine "before a moment" on Windows.
>
> Winblows can fiddle with the "Wake-on-LAN" setting in the BIOS, but AFAIK, the
> BCM4306 does not have this capability. If the BIOS has that setting, it should
> be turned off.
Perhaps it's a crazy idea, but what if the Ethernet device and the WiFi
device are connected to the same SSB bus, an thus sharing the PCI ID?
Is there the full kernel log? In particular, the lines containing "ssb"
would be interesting.
--
Regards,
Pavel Roskin
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Broadcom card totally not visible for system (lspci)
2010-03-30 19:02 ` Pavel Roskin
@ 2010-03-30 19:06 ` Rafał Miłecki
2010-03-30 19:41 ` Pavel Roskin
2010-03-30 19:29 ` Johannes Berg
1 sibling, 1 reply; 9+ messages in thread
From: Rafał Miłecki @ 2010-03-30 19:06 UTC (permalink / raw)
To: Pavel Roskin; +Cc: Larry Finger, b43-dev, linux-wireless
2010/3/30 Pavel Roskin <proski@gnu.org>:
> On Tue, 2010-03-30 at 12:48 -0500, Larry Finger wrote:
>> On 03/30/2010 12:31 PM, Rafał Miłecki wrote:
>> >
>> > Is this possible it's disabled in BIOS by default and needs execution
>> > of some ACPI command or sth to make it work?
>> >
>> > Yeah, trying to find some other reason than faulty WiFi... It's weird
>> > it was working fine "before a moment" on Windows.
>>
>> Winblows can fiddle with the "Wake-on-LAN" setting in the BIOS, but AFAIK, the
>> BCM4306 does not have this capability. If the BIOS has that setting, it should
>> be turned off.
>
> Perhaps it's a crazy idea, but what if the Ethernet device and the WiFi
> device are connected to the same SSB bus, an thus sharing the PCI ID?
>
> Is there the full kernel log? In particular, the lines containing "ssb"
> would be interesting.
You mean dmesg, don't you? I've attached it, but it was stopped by b43
ML. You can see dmesg on marc archive for linux-wireless:
http://marc.info/?l=linux-wireless&m=126996817625998&w=2
Unfortunately I don't have dmesg from some more-debugging kernel.
--
Rafał
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Broadcom card totally not visible for system (lspci)
2010-03-30 19:02 ` Pavel Roskin
2010-03-30 19:06 ` Rafał Miłecki
@ 2010-03-30 19:29 ` Johannes Berg
1 sibling, 0 replies; 9+ messages in thread
From: Johannes Berg @ 2010-03-30 19:29 UTC (permalink / raw)
To: Pavel Roskin
Cc: Larry Finger, Rafał Miłecki, b43-dev, linux-wireless
On Tue, 2010-03-30 at 15:02 -0400, Pavel Roskin wrote:
> On Tue, 2010-03-30 at 12:48 -0500, Larry Finger wrote:
> > On 03/30/2010 12:31 PM, Rafał Miłecki wrote:
> > >
> > > Is this possible it's disabled in BIOS by default and needs execution
> > > of some ACPI command or sth to make it work?
> > >
> > > Yeah, trying to find some other reason than faulty WiFi... It's weird
> > > it was working fine "before a moment" on Windows.
> >
> > Winblows can fiddle with the "Wake-on-LAN" setting in the BIOS, but AFAIK, the
> > BCM4306 does not have this capability. If the BIOS has that setting, it should
> > be turned off.
>
> Perhaps it's a crazy idea, but what if the Ethernet device and the WiFi
> device are connected to the same SSB bus, an thus sharing the PCI ID?
Should be fine, actually, since b43 binds the 802.11 ssb core.
johannes
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Broadcom card totally not visible for system (lspci)
2010-03-30 19:06 ` Rafał Miłecki
@ 2010-03-30 19:41 ` Pavel Roskin
0 siblings, 0 replies; 9+ messages in thread
From: Pavel Roskin @ 2010-03-30 19:41 UTC (permalink / raw)
To: Rafał Miłecki; +Cc: Larry Finger, b43-dev, linux-wireless
On Tue, 2010-03-30 at 21:06 +0200, Rafał Miłecki wrote:
> You mean dmesg, don't you?
Yes.
> I've attached it, but it was stopped by b43
> ML. You can see dmesg on marc archive for linux-wireless:
> http://marc.info/?l=linux-wireless&m=126996817625998&w=2
>
> Unfortunately I don't have dmesg from some more-debugging kernel.
Indeed, there is no list of SSB devices. The current kernels will
output that list even if CONFIG_SSB_DEBUG is disabled, but older kernels
required CONFIG_SSB_DEBUG for that.
Installing compat-wireless should help. Also, ask the user to run
"modprobe b43". It might just work.
--
Regards,
Pavel Roskin
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Broadcom card totally not visible for system (lspci)
2010-03-30 17:19 ` Larry Finger
2010-03-30 17:31 ` Rafał Miłecki
@ 2010-03-31 6:39 ` Holger Schurig
1 sibling, 0 replies; 9+ messages in thread
From: Holger Schurig @ 2010-03-31 6:39 UTC (permalink / raw)
To: Larry Finger; +Cc: Rafał Miłecki, b43-dev, linux-wireless
> (1) It is disabled in the BIOS.
I once had a geode-based tablet PC with a buggy ACPI, where the device hang
when I used the buttons extensively).
In the end, I dumped the ACPI bios and disassembled it with "iasl". Once you
get a grip to the mnemonics, disassembled ACPI opcodes are quite readable. I
found some quite interesting things about the tablet that haven't been
documented anywhere, e.g. most of the internal GPIO.
So, if your polish friend is willing to go this route ... that's at least a
possibility.
--
http://www.holgerschurig.de
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2010-03-31 6:38 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2010-03-30 16:56 Broadcom card totally not visible for system (lspci) Rafał Miłecki
2010-03-30 17:19 ` Larry Finger
2010-03-30 17:31 ` Rafał Miłecki
2010-03-30 17:48 ` Larry Finger
2010-03-30 19:02 ` Pavel Roskin
2010-03-30 19:06 ` Rafał Miłecki
2010-03-30 19:41 ` Pavel Roskin
2010-03-30 19:29 ` Johannes Berg
2010-03-31 6:39 ` Holger Schurig
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).