From: Karl Beldan <karl.beldan@gmail.com>
To: Emmanuel Grumbach <egrumbach@gmail.com>
Cc: linux-wireless@vger.kernel.org,
Alexander Bondar <alexander.bondar@intel.com>,
Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Subject: Re: [PATCH 08/36] iwlwifi: mvm: Change power management dependency on multi MAC
Date: Mon, 13 Jan 2014 12:13:57 +0100 [thread overview]
Message-ID: <20140113111357.GA4611@magnum.frso.rivierawaves.com> (raw)
In-Reply-To: <1387313079-28123-8-git-send-email-egrumbach@gmail.com>
On Tue, Dec 17, 2013 at 10:44:11PM +0200, Emmanuel Grumbach wrote:
> From: Alexander Bondar <alexander.bondar@intel.com>
>
> FW still does not support power management on multiple MAC interfaces.
> Currently the driver enforce this limitation by disabling PM if second
> interface is added. Change this behavior to allow PM on a single interface
> even if other interfaces exist but not bound to any specific PHY.
> PM will be enabled if only one single interface is bound.
>
> Signed-off-by: Alexander Bondar <alexander.bondar@intel.com>
> Reviewed-by: Johannes Berg <johannes.berg@intel.com>
> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Hi,
This broke monitor mode:
(unsetting .power_update_binding does not hang)
modprobe iwlmvm
iw dev wlan0 set type monitor
iw dev wlan0 set freq 5180 40 5190 # hangs
Can you reproduce it easily or do you need me to post further dbg info ?
Karl
next prev parent reply other threads:[~2014-01-13 11:14 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-17 20:42 pull request: iwlwifi-next 2013-12-17 Emmanuel Grumbach
2013-12-17 20:44 ` [PATCH 01/36] iwlwifi: mvm: don't send SMPS action frame with single RX antenna Emmanuel Grumbach
2013-12-17 20:44 ` [PATCH 02/36] iwlwifi: mvm: Add Smart FIFO support Emmanuel Grumbach
2013-12-17 20:44 ` [PATCH 03/36] iwlwifi: mvm: add a generic cipher scheme support Emmanuel Grumbach
2013-12-17 20:44 ` [PATCH 04/36] iwlwifi: publish STBC support in HT Emmanuel Grumbach
2013-12-17 20:44 ` [PATCH 05/36] iwlwifi: set VHT beamformee STS cap correctly Emmanuel Grumbach
2013-12-17 20:44 ` [PATCH 06/36] iwlwifi: publish Tx STBC support in VHT Emmanuel Grumbach
2013-12-17 20:44 ` [PATCH 07/36] iwlwifi: mvm: Add uAPSD misbehaving AP notification handling Emmanuel Grumbach
2013-12-17 20:44 ` [PATCH 08/36] iwlwifi: mvm: Change power management dependency on multi MAC Emmanuel Grumbach
2014-01-13 11:13 ` Karl Beldan [this message]
2014-01-13 11:15 ` Grumbach, Emmanuel
2014-01-13 12:41 ` Karl Beldan
2014-01-16 20:08 ` Emmanuel Grumbach
2014-01-16 21:43 ` Karl Beldan
2014-02-13 12:01 ` Emmanuel Grumbach
2014-03-06 10:21 ` Karl Beldan
2014-03-06 10:22 ` Grumbach, Emmanuel
2014-03-06 11:59 ` Karl Beldan
2014-03-06 10:25 ` Grumbach, Emmanuel
2014-03-06 10:49 ` Karl Beldan
2014-03-06 10:58 ` Grumbach, Emmanuel
2014-03-06 11:02 ` Grumbach, Emmanuel
2014-03-06 11:54 ` Karl Beldan
2013-12-17 20:44 ` [PATCH 09/36] iwlwifi: mvm: Disable power save for monitor interface Emmanuel Grumbach
2013-12-17 20:44 ` [PATCH 10/36] iwlwifi: mvm: Enable power save on a single P2P client interface Emmanuel Grumbach
2013-12-17 20:44 ` [PATCH 11/36] iwlwifi: mvm: add per-vif power debugfs hooks Emmanuel Grumbach
2013-12-17 20:44 ` [PATCH 12/36] iwlwifi: mvm: move iwl_mvm_set_tx_power to PHY area Emmanuel Grumbach
2013-12-17 20:44 ` [PATCH 13/36] iwlwifi: mvm: add multicast filtering support Emmanuel Grumbach
2013-12-17 20:44 ` [PATCH 14/36] iwlwifi: mvm: configure phy_ctxt with min_def Emmanuel Grumbach
2013-12-17 20:44 ` [PATCH 15/36] iwlwifi: mvm: clarify smps_requests documentation Emmanuel Grumbach
2013-12-17 20:44 ` [PATCH 16/36] iwlwifi: trans: divide stop_hw into stop_device/op_mode_leave Emmanuel Grumbach
2013-12-17 20:44 ` [PATCH 17/36] iwlwifi: trans: use a unified transport status Emmanuel Grumbach
2013-12-17 20:44 ` [PATCH 18/36] iwlwifi: trans: prevent tx and cmds during FW error Emmanuel Grumbach
2013-12-17 20:44 ` [PATCH 19/36] iwlwifi: mvm: rs: move rs_program_fix_rate to cleanup ifdefs Emmanuel Grumbach
2013-12-17 20:44 ` [PATCH 20/36] iwlwifi: remove pointer to transport from op_mode Emmanuel Grumbach
2013-12-17 20:44 ` [PATCH 21/36] iwlwifi: mvm: check iwl_nvm_init return value Emmanuel Grumbach
2013-12-17 20:44 ` [PATCH 22/36] iwlwifi: trans: prevent reprobe on repeated FW errors before restart Emmanuel Grumbach
2013-12-17 20:44 ` [PATCH 23/36] iwlwifi: trans: clear FW_ERROR status in common code Emmanuel Grumbach
2013-12-17 20:44 ` [PATCH 24/36] iwlwifi: trans: turn set_pmi into an optional callback Emmanuel Grumbach
2013-12-17 20:44 ` [PATCH 25/36] iwlwifi: mvm: Add and examine TLV flag for P2P client uAPSD support Emmanuel Grumbach
2013-12-17 20:44 ` [PATCH 26/36] iwlwifi: mvm: rs: refactor building the LQ command Emmanuel Grumbach
2013-12-17 20:44 ` [PATCH 27/36] iwlwifi: mvm: rs: avoid recalc of supported legacy rate mask Emmanuel Grumbach
2013-12-17 20:44 ` [PATCH 28/36] iwlwifi: mvm: rs: improve rates table algo Emmanuel Grumbach
2013-12-17 20:44 ` [PATCH 29/36] iwlwifi: mvm: rs: remove unnecessary debug logs Emmanuel Grumbach
2013-12-17 20:44 ` [PATCH 30/36] iwlwifi: mvm: rs: refactor rate scale action decision Emmanuel Grumbach
2013-12-17 20:44 ` [PATCH 31/36] iwlwifi: mvm: fixup Makefile Emmanuel Grumbach
2013-12-17 20:44 ` [PATCH 32/36] iwlwifi: mvm: Do not allow AP MAC context update if not active Emmanuel Grumbach
2013-12-17 20:44 ` [PATCH 33/36] iwlwifi: mvm: rs: disable MCS9 Tx workaround Emmanuel Grumbach
2013-12-17 20:44 ` [PATCH 34/36] iwlwifi: mvm: set highest rate in VHT MCS Set Emmanuel Grumbach
2013-12-17 20:44 ` [PATCH 35/36] iwlwifi: mvm: rs: fix RTS protection being set indefinitely Emmanuel Grumbach
2013-12-17 20:44 ` [PATCH 36/36] iwlwifi: mvm: rs: fix variable shadowing Emmanuel Grumbach
2013-12-18 20:12 ` pull request: iwlwifi-next 2013-12-17 John W. Linville
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140113111357.GA4611@magnum.frso.rivierawaves.com \
--to=karl.beldan@gmail.com \
--cc=alexander.bondar@intel.com \
--cc=egrumbach@gmail.com \
--cc=emmanuel.grumbach@intel.com \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).