From: Karl Beldan <karl.beldan@gmail.com>
To: Emmanuel Grumbach <egrumbach@gmail.com>
Cc: "Grumbach, Emmanuel" <emmanuel.grumbach@intel.com>,
"linux-wireless@vger.kernel.org" <linux-wireless@vger.kernel.org>,
"Bondar, Alexander" <alexander.bondar@intel.com>
Subject: Re: [PATCH 08/36] iwlwifi: mvm: Change power management dependency on multi MAC
Date: Thu, 6 Mar 2014 11:21:02 +0100 [thread overview]
Message-ID: <20140306102102.GA15185@magnum.frso.rivierawaves.com> (raw)
In-Reply-To: <CANUX_P25Oi=_5RBHKyuWQEZe6DXVyMOFS2xfGfa45HyyJSz=ug@mail.gmail.com>
On Thu, Feb 13, 2014 at 02:01:43PM +0200, Emmanuel Grumbach wrote:
> Monitor mode should work with latest wireless-testing now.
Hi,
Thanks for the update, indeed monitor is in better shape, however I am
still seeing some issues.
E.g. short-guard or > 20MHz bw frames are not visible when not
aggregated, I still see "Microcode SW error detected." but in a
different scenario (monitoring with main managed iface down, then upping
the main managed iface up), it also seems that we filter out many frames
when the main managed iface is up and/or? associated.
Also, I started working on AMSDUs this week and yesterday my laptop
crashed immediately when monitoring. This morning I see that this
happens when my aggregates start getting above the ~4k limit and
modprobing with amsdu_size_8K=1 seems to 'fix' the issue, I guess some
places need some oflows checks.
All this with wireless-next@704445d9 (i.e. circa the time I got your
email) and fw 22.15.8.0.
Karl
next prev parent reply other threads:[~2014-03-06 10:21 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-17 20:42 pull request: iwlwifi-next 2013-12-17 Emmanuel Grumbach
2013-12-17 20:44 ` [PATCH 01/36] iwlwifi: mvm: don't send SMPS action frame with single RX antenna Emmanuel Grumbach
2013-12-17 20:44 ` [PATCH 02/36] iwlwifi: mvm: Add Smart FIFO support Emmanuel Grumbach
2013-12-17 20:44 ` [PATCH 03/36] iwlwifi: mvm: add a generic cipher scheme support Emmanuel Grumbach
2013-12-17 20:44 ` [PATCH 04/36] iwlwifi: publish STBC support in HT Emmanuel Grumbach
2013-12-17 20:44 ` [PATCH 05/36] iwlwifi: set VHT beamformee STS cap correctly Emmanuel Grumbach
2013-12-17 20:44 ` [PATCH 06/36] iwlwifi: publish Tx STBC support in VHT Emmanuel Grumbach
2013-12-17 20:44 ` [PATCH 07/36] iwlwifi: mvm: Add uAPSD misbehaving AP notification handling Emmanuel Grumbach
2013-12-17 20:44 ` [PATCH 08/36] iwlwifi: mvm: Change power management dependency on multi MAC Emmanuel Grumbach
2014-01-13 11:13 ` Karl Beldan
2014-01-13 11:15 ` Grumbach, Emmanuel
2014-01-13 12:41 ` Karl Beldan
2014-01-16 20:08 ` Emmanuel Grumbach
2014-01-16 21:43 ` Karl Beldan
2014-02-13 12:01 ` Emmanuel Grumbach
2014-03-06 10:21 ` Karl Beldan [this message]
2014-03-06 10:22 ` Grumbach, Emmanuel
2014-03-06 11:59 ` Karl Beldan
2014-03-06 10:25 ` Grumbach, Emmanuel
2014-03-06 10:49 ` Karl Beldan
2014-03-06 10:58 ` Grumbach, Emmanuel
2014-03-06 11:02 ` Grumbach, Emmanuel
2014-03-06 11:54 ` Karl Beldan
2013-12-17 20:44 ` [PATCH 09/36] iwlwifi: mvm: Disable power save for monitor interface Emmanuel Grumbach
2013-12-17 20:44 ` [PATCH 10/36] iwlwifi: mvm: Enable power save on a single P2P client interface Emmanuel Grumbach
2013-12-17 20:44 ` [PATCH 11/36] iwlwifi: mvm: add per-vif power debugfs hooks Emmanuel Grumbach
2013-12-17 20:44 ` [PATCH 12/36] iwlwifi: mvm: move iwl_mvm_set_tx_power to PHY area Emmanuel Grumbach
2013-12-17 20:44 ` [PATCH 13/36] iwlwifi: mvm: add multicast filtering support Emmanuel Grumbach
2013-12-17 20:44 ` [PATCH 14/36] iwlwifi: mvm: configure phy_ctxt with min_def Emmanuel Grumbach
2013-12-17 20:44 ` [PATCH 15/36] iwlwifi: mvm: clarify smps_requests documentation Emmanuel Grumbach
2013-12-17 20:44 ` [PATCH 16/36] iwlwifi: trans: divide stop_hw into stop_device/op_mode_leave Emmanuel Grumbach
2013-12-17 20:44 ` [PATCH 17/36] iwlwifi: trans: use a unified transport status Emmanuel Grumbach
2013-12-17 20:44 ` [PATCH 18/36] iwlwifi: trans: prevent tx and cmds during FW error Emmanuel Grumbach
2013-12-17 20:44 ` [PATCH 19/36] iwlwifi: mvm: rs: move rs_program_fix_rate to cleanup ifdefs Emmanuel Grumbach
2013-12-17 20:44 ` [PATCH 20/36] iwlwifi: remove pointer to transport from op_mode Emmanuel Grumbach
2013-12-17 20:44 ` [PATCH 21/36] iwlwifi: mvm: check iwl_nvm_init return value Emmanuel Grumbach
2013-12-17 20:44 ` [PATCH 22/36] iwlwifi: trans: prevent reprobe on repeated FW errors before restart Emmanuel Grumbach
2013-12-17 20:44 ` [PATCH 23/36] iwlwifi: trans: clear FW_ERROR status in common code Emmanuel Grumbach
2013-12-17 20:44 ` [PATCH 24/36] iwlwifi: trans: turn set_pmi into an optional callback Emmanuel Grumbach
2013-12-17 20:44 ` [PATCH 25/36] iwlwifi: mvm: Add and examine TLV flag for P2P client uAPSD support Emmanuel Grumbach
2013-12-17 20:44 ` [PATCH 26/36] iwlwifi: mvm: rs: refactor building the LQ command Emmanuel Grumbach
2013-12-17 20:44 ` [PATCH 27/36] iwlwifi: mvm: rs: avoid recalc of supported legacy rate mask Emmanuel Grumbach
2013-12-17 20:44 ` [PATCH 28/36] iwlwifi: mvm: rs: improve rates table algo Emmanuel Grumbach
2013-12-17 20:44 ` [PATCH 29/36] iwlwifi: mvm: rs: remove unnecessary debug logs Emmanuel Grumbach
2013-12-17 20:44 ` [PATCH 30/36] iwlwifi: mvm: rs: refactor rate scale action decision Emmanuel Grumbach
2013-12-17 20:44 ` [PATCH 31/36] iwlwifi: mvm: fixup Makefile Emmanuel Grumbach
2013-12-17 20:44 ` [PATCH 32/36] iwlwifi: mvm: Do not allow AP MAC context update if not active Emmanuel Grumbach
2013-12-17 20:44 ` [PATCH 33/36] iwlwifi: mvm: rs: disable MCS9 Tx workaround Emmanuel Grumbach
2013-12-17 20:44 ` [PATCH 34/36] iwlwifi: mvm: set highest rate in VHT MCS Set Emmanuel Grumbach
2013-12-17 20:44 ` [PATCH 35/36] iwlwifi: mvm: rs: fix RTS protection being set indefinitely Emmanuel Grumbach
2013-12-17 20:44 ` [PATCH 36/36] iwlwifi: mvm: rs: fix variable shadowing Emmanuel Grumbach
2013-12-18 20:12 ` pull request: iwlwifi-next 2013-12-17 John W. Linville
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140306102102.GA15185@magnum.frso.rivierawaves.com \
--to=karl.beldan@gmail.com \
--cc=alexander.bondar@intel.com \
--cc=egrumbach@gmail.com \
--cc=emmanuel.grumbach@intel.com \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).