* [PATCH] wireless-regdb: Update rules for Australia (AU) and add 60GHz rules @ 2017-02-18 6:35 Ryan Mounce 2017-02-18 20:45 ` Sebastian Gottschall 2017-02-22 21:30 ` Seth Forshee 0 siblings, 2 replies; 16+ messages in thread From: Ryan Mounce @ 2017-02-18 6:35 UTC (permalink / raw) To: seth.forshee; +Cc: wireless-regdb, linux-wireless Sourced from the latest legislation at https://www.legislation.gov.au/Details/F2016C0043 The current rules exceed legal limits between 5250-5330MHz, and permit illegal operation in 5600-5650MHz (reserved for weather radar). Signed-off-by: Ryan Mounce <ryan@mounce.com.au> --- db.txt | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) diff --git a/db.txt b/db.txt index 05108e0..b951e0c 100644 --- a/db.txt +++ b/db.txt @@ -85,12 +85,17 @@ country AT: DFS-ETSI # 60 GHz band channels 1-4, ref: Etsi En 302 567 (57000 - 66000 @ 2160), (40) +# Source: +# https://www.legislation.gov.au/Details/F2016C00432 +# Both DFS-ETSI and DFS-FCC are acceptable per AS/NZS 4268 Appendix B country AU: DFS-ETSI - (2402 - 2482 @ 40), (20) - (5170 - 5250 @ 80), (17), AUTO-BW - (5250 - 5330 @ 80), (24), DFS, AUTO-BW - (5490 - 5710 @ 160), (24), DFS - (5735 - 5835 @ 80), (30) + (2402 - 2482 @ 40), (36) + (5170 - 5250 @ 80), (23), NO-OUTDOOR, AUTO-BW + (5250 - 5330 @ 80), (23), NO-OUTDOOR, AUTO-BW, DFS + (5490 - 5590 @ 80), (30), DFS + (5650 - 5730 @ 80), (30), DFS + (5735 - 5835 @ 80), (36) + (57000 - 66000 @ 2160), (43), NO-OUTDOOR country AW: DFS-ETSI (2402 - 2482 @ 40), (20) -- 2.11.0 ^ permalink raw reply related [flat|nested] 16+ messages in thread
* Re: [PATCH] wireless-regdb: Update rules for Australia (AU) and add 60GHz rules 2017-02-18 6:35 [PATCH] wireless-regdb: Update rules for Australia (AU) and add 60GHz rules Ryan Mounce @ 2017-02-18 20:45 ` Sebastian Gottschall 2017-02-19 0:01 ` Ryan Mounce 2017-02-22 21:30 ` Seth Forshee 1 sibling, 1 reply; 16+ messages in thread From: Sebastian Gottschall @ 2017-02-18 20:45 UTC (permalink / raw) To: Ryan Mounce, seth.forshee; +Cc: wireless-regdb, linux-wireless maybe i'm blind. but you reduced the channel width from 160 to 80 mhz. but i can't find any restriction in the document in a quick review Sebastian Am 18.02.2017 um 07:35 schrieb Ryan Mounce: > Sourced from the latest legislation at > https://www.legislation.gov.au/Details/F2016C0043 > > The current rules exceed legal limits between 5250-5330MHz, and permit > illegal operation in 5600-5650MHz (reserved for weather radar). > > Signed-off-by: Ryan Mounce <ryan@mounce.com.au> > --- > db.txt | 15 ++++++++++----- > 1 file changed, 10 insertions(+), 5 deletions(-) > > diff --git a/db.txt b/db.txt > index 05108e0..b951e0c 100644 > --- a/db.txt > +++ b/db.txt > @@ -85,12 +85,17 @@ country AT: DFS-ETSI > # 60 GHz band channels 1-4, ref: Etsi En 302 567 > (57000 - 66000 @ 2160), (40) > > +# Source: > +# https://www.legislation.gov.au/Details/F2016C00432 > +# Both DFS-ETSI and DFS-FCC are acceptable per AS/NZS 4268 Appendix B > country AU: DFS-ETSI > - (2402 - 2482 @ 40), (20) > - (5170 - 5250 @ 80), (17), AUTO-BW > - (5250 - 5330 @ 80), (24), DFS, AUTO-BW > - (5490 - 5710 @ 160), (24), DFS > - (5735 - 5835 @ 80), (30) > + (2402 - 2482 @ 40), (36) > + (5170 - 5250 @ 80), (23), NO-OUTDOOR, AUTO-BW > + (5250 - 5330 @ 80), (23), NO-OUTDOOR, AUTO-BW, DFS > + (5490 - 5590 @ 80), (30), DFS > + (5650 - 5730 @ 80), (30), DFS > + (5735 - 5835 @ 80), (36) > + (57000 - 66000 @ 2160), (43), NO-OUTDOOR > > country AW: DFS-ETSI > (2402 - 2482 @ 40), (20) -- Mit freundlichen Grüssen / Regards Sebastian Gottschall / CTO NewMedia-NET GmbH - DD-WRT Firmensitz: Berliner Ring 101, 64625 Bensheim Registergericht: Amtsgericht Darmstadt, HRB 25473 Geschäftsführer: Peter Steinhäuser, Christian Scheele http://www.dd-wrt.com email: s.gottschall@dd-wrt.com Tel.: +496251-582650 / Fax: +496251-5826565 ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH] wireless-regdb: Update rules for Australia (AU) and add 60GHz rules 2017-02-18 20:45 ` Sebastian Gottschall @ 2017-02-19 0:01 ` Ryan Mounce 2017-02-19 12:16 ` Sebastian Gottschall 0 siblings, 1 reply; 16+ messages in thread From: Ryan Mounce @ 2017-02-19 0:01 UTC (permalink / raw) To: Sebastian Gottschall, seth.forshee; +Cc: wireless-regdb, linux-wireless Hi Sebastian, There is no explicit channel width restriction in the document, however the only band in which the current regdb rules permit 160MHz operation (5490-5710MHz) would result in an overlap with the restricted weather radar band 5600-5650MHz. While remaining in compliance with both 802.11 and Australian law, contiguous 160MHz operation in 5GHz is only permitted between 5170-5330MHz which spans two bands with slightly different requirements, hence AUTO-BW. Regards, Ryan Mounce ryan@mounce.com.au On 19 February 2017 at 07:15, Sebastian Gottschall <s.gottschall@dd-wrt.com> wrote: > maybe i'm blind. but you reduced the channel width from 160 to 80 mhz. bu= t i > can't find any restriction in the document in a quick review > > Sebastian > > > Am 18.02.2017 um 07:35 schrieb Ryan Mounce: >> >> Sourced from the latest legislation at >> https://www.legislation.gov.au/Details/F2016C0043 >> >> The current rules exceed legal limits between 5250-5330MHz, and permit >> illegal operation in 5600-5650MHz (reserved for weather radar). >> >> Signed-off-by: Ryan Mounce <ryan@mounce.com.au> >> --- >> db.txt | 15 ++++++++++----- >> 1 file changed, 10 insertions(+), 5 deletions(-) >> >> diff --git a/db.txt b/db.txt >> index 05108e0..b951e0c 100644 >> --- a/db.txt >> +++ b/db.txt >> @@ -85,12 +85,17 @@ country AT: DFS-ETSI >> # 60 GHz band channels 1-4, ref: Etsi En 302 567 >> (57000 - 66000 @ 2160), (40) >> +# Source: >> +# https://www.legislation.gov.au/Details/F2016C00432 >> +# Both DFS-ETSI and DFS-FCC are acceptable per AS/NZS 4268 Appendix B >> country AU: DFS-ETSI >> - (2402 - 2482 @ 40), (20) >> - (5170 - 5250 @ 80), (17), AUTO-BW >> - (5250 - 5330 @ 80), (24), DFS, AUTO-BW >> - (5490 - 5710 @ 160), (24), DFS >> - (5735 - 5835 @ 80), (30) >> + (2402 - 2482 @ 40), (36) >> + (5170 - 5250 @ 80), (23), NO-OUTDOOR, AUTO-BW >> + (5250 - 5330 @ 80), (23), NO-OUTDOOR, AUTO-BW, DFS >> + (5490 - 5590 @ 80), (30), DFS >> + (5650 - 5730 @ 80), (30), DFS >> + (5735 - 5835 @ 80), (36) >> + (57000 - 66000 @ 2160), (43), NO-OUTDOOR >> country AW: DFS-ETSI >> (2402 - 2482 @ 40), (20) > > > > -- > Mit freundlichen Gr=C3=BCssen / Regards > > Sebastian Gottschall / CTO > > NewMedia-NET GmbH - DD-WRT > Firmensitz: Berliner Ring 101, 64625 Bensheim > Registergericht: Amtsgericht Darmstadt, HRB 25473 > Gesch=C3=A4ftsf=C3=BChrer: Peter Steinh=C3=A4user, Christian Scheele > http://www.dd-wrt.com > email: s.gottschall@dd-wrt.com > Tel.: +496251-582650 / Fax: +496251-5826565 > ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH] wireless-regdb: Update rules for Australia (AU) and add 60GHz rules 2017-02-19 0:01 ` Ryan Mounce @ 2017-02-19 12:16 ` Sebastian Gottschall 2017-02-19 12:36 ` Ryan Mounce 0 siblings, 1 reply; 16+ messages in thread From: Sebastian Gottschall @ 2017-02-19 12:16 UTC (permalink / raw) To: Ryan Mounce, seth.forshee; +Cc: wireless-regdb, linux-wireless Am 19.02.2017 um 01:01 schrieb Ryan Mounce: > Hi Sebastian, > > There is no explicit channel width restriction in the document, > however the only band in which the current regdb rules permit 160MHz > operation (5490-5710MHz) would result in an overlap with the > restricted weather radar band 5600-5650MHz. thats the case for all countries, so this couldnt be a argument. dfs should handle this > > While remaining in compliance with both 802.11 and Australian law, > contiguous 160MHz operation in 5GHz is only permitted between > 5170-5330MHz which spans two bands with slightly different > requirements, hence AUTO-BW. > > Regards, > Ryan Mounce > > ryan@mounce.com.au > > On 19 February 2017 at 07:15, Sebastian Gottschall > <s.gottschall@dd-wrt.com> wrote: >> maybe i'm blind. but you reduced the channel width from 160 to 80 mhz. but i >> can't find any restriction in the document in a quick review >> >> Sebastian >> >> >> Am 18.02.2017 um 07:35 schrieb Ryan Mounce: >>> Sourced from the latest legislation at >>> https://www.legislation.gov.au/Details/F2016C0043 >>> >>> The current rules exceed legal limits between 5250-5330MHz, and permit >>> illegal operation in 5600-5650MHz (reserved for weather radar). >>> >>> Signed-off-by: Ryan Mounce <ryan@mounce.com.au> >>> --- >>> db.txt | 15 ++++++++++----- >>> 1 file changed, 10 insertions(+), 5 deletions(-) >>> >>> diff --git a/db.txt b/db.txt >>> index 05108e0..b951e0c 100644 >>> --- a/db.txt >>> +++ b/db.txt >>> @@ -85,12 +85,17 @@ country AT: DFS-ETSI >>> # 60 GHz band channels 1-4, ref: Etsi En 302 567 >>> (57000 - 66000 @ 2160), (40) >>> +# Source: >>> +# https://www.legislation.gov.au/Details/F2016C00432 >>> +# Both DFS-ETSI and DFS-FCC are acceptable per AS/NZS 4268 Appendix B >>> country AU: DFS-ETSI >>> - (2402 - 2482 @ 40), (20) >>> - (5170 - 5250 @ 80), (17), AUTO-BW >>> - (5250 - 5330 @ 80), (24), DFS, AUTO-BW >>> - (5490 - 5710 @ 160), (24), DFS >>> - (5735 - 5835 @ 80), (30) >>> + (2402 - 2482 @ 40), (36) >>> + (5170 - 5250 @ 80), (23), NO-OUTDOOR, AUTO-BW >>> + (5250 - 5330 @ 80), (23), NO-OUTDOOR, AUTO-BW, DFS >>> + (5490 - 5590 @ 80), (30), DFS >>> + (5650 - 5730 @ 80), (30), DFS >>> + (5735 - 5835 @ 80), (36) >>> + (57000 - 66000 @ 2160), (43), NO-OUTDOOR >>> country AW: DFS-ETSI >>> (2402 - 2482 @ 40), (20) >> >> >> -- >> Mit freundlichen Grüssen / Regards >> >> Sebastian Gottschall / CTO >> >> NewMedia-NET GmbH - DD-WRT >> Firmensitz: Berliner Ring 101, 64625 Bensheim >> Registergericht: Amtsgericht Darmstadt, HRB 25473 >> Geschäftsführer: Peter Steinhäuser, Christian Scheele >> http://www.dd-wrt.com >> email: s.gottschall@dd-wrt.com >> Tel.: +496251-582650 / Fax: +496251-5826565 >> -- Mit freundlichen Grüssen / Regards Sebastian Gottschall / CTO NewMedia-NET GmbH - DD-WRT Firmensitz: Berliner Ring 101, 64625 Bensheim Registergericht: Amtsgericht Darmstadt, HRB 25473 Geschäftsführer: Peter Steinhäuser, Christian Scheele http://www.dd-wrt.com email: s.gottschall@dd-wrt.com Tel.: +496251-582650 / Fax: +496251-5826565 ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH] wireless-regdb: Update rules for Australia (AU) and add 60GHz rules 2017-02-19 12:16 ` Sebastian Gottschall @ 2017-02-19 12:36 ` Ryan Mounce 0 siblings, 0 replies; 16+ messages in thread From: Ryan Mounce @ 2017-02-19 12:36 UTC (permalink / raw) To: Sebastian Gottschall; +Cc: Seth Forshee, wireless-regdb, linux-wireless Australian regulations differ from most of Europe, the USA and even New Zealand (which shares AS/NZS 4268) in that any unlicensed operation between 5600-5650MHz is prohibited outright, rather than being allowed after an extended DFS channel availability check. The situation appears to be similar in Canada, the regdb has previously been amended to reflect this. https://git.kernel.org/cgit/linux/kernel/git/sforshee/wireless-regdb.git/co= mmit/db.txt?id=3Dce7697d3def48f87427b3a3c285b46241af3b79d On 19 February 2017 at 22:46, Sebastian Gottschall <s.gottschall@dd-wrt.com> wrote: > Am 19.02.2017 um 01:01 schrieb Ryan Mounce: >> >> Hi Sebastian, >> >> There is no explicit channel width restriction in the document, >> however the only band in which the current regdb rules permit 160MHz >> operation (5490-5710MHz) would result in an overlap with the >> restricted weather radar band 5600-5650MHz. > > thats the case for all countries, so this couldnt be a argument. dfs shou= ld > handle this > >> >> While remaining in compliance with both 802.11 and Australian law, >> contiguous 160MHz operation in 5GHz is only permitted between >> 5170-5330MHz which spans two bands with slightly different >> requirements, hence AUTO-BW. >> >> Regards, >> Ryan Mounce >> >> ryan@mounce.com.au >> >> On 19 February 2017 at 07:15, Sebastian Gottschall >> <s.gottschall@dd-wrt.com> wrote: >>> >>> maybe i'm blind. but you reduced the channel width from 160 to 80 mhz. >>> but i >>> can't find any restriction in the document in a quick review >>> >>> Sebastian >>> >>> >>> Am 18.02.2017 um 07:35 schrieb Ryan Mounce: >>>> >>>> Sourced from the latest legislation at >>>> https://www.legislation.gov.au/Details/F2016C0043 >>>> >>>> The current rules exceed legal limits between 5250-5330MHz, and permit >>>> illegal operation in 5600-5650MHz (reserved for weather radar). >>>> >>>> Signed-off-by: Ryan Mounce <ryan@mounce.com.au> >>>> --- >>>> db.txt | 15 ++++++++++----- >>>> 1 file changed, 10 insertions(+), 5 deletions(-) >>>> >>>> diff --git a/db.txt b/db.txt >>>> index 05108e0..b951e0c 100644 >>>> --- a/db.txt >>>> +++ b/db.txt >>>> @@ -85,12 +85,17 @@ country AT: DFS-ETSI >>>> # 60 GHz band channels 1-4, ref: Etsi En 302 567 >>>> (57000 - 66000 @ 2160), (40) >>>> +# Source: >>>> +# https://www.legislation.gov.au/Details/F2016C00432 >>>> +# Both DFS-ETSI and DFS-FCC are acceptable per AS/NZS 4268 Appendix B >>>> country AU: DFS-ETSI >>>> - (2402 - 2482 @ 40), (20) >>>> - (5170 - 5250 @ 80), (17), AUTO-BW >>>> - (5250 - 5330 @ 80), (24), DFS, AUTO-BW >>>> - (5490 - 5710 @ 160), (24), DFS >>>> - (5735 - 5835 @ 80), (30) >>>> + (2402 - 2482 @ 40), (36) >>>> + (5170 - 5250 @ 80), (23), NO-OUTDOOR, AUTO-BW >>>> + (5250 - 5330 @ 80), (23), NO-OUTDOOR, AUTO-BW, DFS >>>> + (5490 - 5590 @ 80), (30), DFS >>>> + (5650 - 5730 @ 80), (30), DFS >>>> + (5735 - 5835 @ 80), (36) >>>> + (57000 - 66000 @ 2160), (43), NO-OUTDOOR >>>> country AW: DFS-ETSI >>>> (2402 - 2482 @ 40), (20) >>> >>> >>> >>> -- >>> Mit freundlichen Gr=C3=BCssen / Regards >>> >>> Sebastian Gottschall / CTO >>> >>> NewMedia-NET GmbH - DD-WRT >>> Firmensitz: Berliner Ring 101, 64625 Bensheim >>> Registergericht: Amtsgericht Darmstadt, HRB 25473 >>> Gesch=C3=A4ftsf=C3=BChrer: Peter Steinh=C3=A4user, Christian Scheele >>> http://www.dd-wrt.com >>> email: s.gottschall@dd-wrt.com >>> Tel.: +496251-582650 / Fax: +496251-5826565 >>> > > > -- > Mit freundlichen Gr=C3=BCssen / Regards > > Sebastian Gottschall / CTO > > NewMedia-NET GmbH - DD-WRT > Firmensitz: Berliner Ring 101, 64625 Bensheim > Registergericht: Amtsgericht Darmstadt, HRB 25473 > Gesch=C3=A4ftsf=C3=BChrer: Peter Steinh=C3=A4user, Christian Scheele > http://www.dd-wrt.com > email: s.gottschall@dd-wrt.com > Tel.: +496251-582650 / Fax: +496251-5826565 > ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH] wireless-regdb: Update rules for Australia (AU) and add 60GHz rules 2017-02-18 6:35 [PATCH] wireless-regdb: Update rules for Australia (AU) and add 60GHz rules Ryan Mounce 2017-02-18 20:45 ` Sebastian Gottschall @ 2017-02-22 21:30 ` Seth Forshee 2017-02-22 23:05 ` Ryan Mounce 1 sibling, 1 reply; 16+ messages in thread From: Seth Forshee @ 2017-02-22 21:30 UTC (permalink / raw) To: Ryan Mounce; +Cc: wireless-regdb, linux-wireless On Sat, Feb 18, 2017 at 05:05:15PM +1030, Ryan Mounce wrote: > Sourced from the latest legislation at > https://www.legislation.gov.au/Details/F2016C0043 This link isn't working for me. > The current rules exceed legal limits between 5250-5330MHz, and permit > illegal operation in 5600-5650MHz (reserved for weather radar). The changes also increases the limits for most other ranges, by quite a bit in some cases. Seems that this should also be mentioned in the changelog, and I'd like to be able to check those changes against the documentation. Thanks, Seth > > Signed-off-by: Ryan Mounce <ryan@mounce.com.au> > --- > db.txt | 15 ++++++++++----- > 1 file changed, 10 insertions(+), 5 deletions(-) > > diff --git a/db.txt b/db.txt > index 05108e0..b951e0c 100644 > --- a/db.txt > +++ b/db.txt > @@ -85,12 +85,17 @@ country AT: DFS-ETSI > # 60 GHz band channels 1-4, ref: Etsi En 302 567 > (57000 - 66000 @ 2160), (40) > > +# Source: > +# https://www.legislation.gov.au/Details/F2016C00432 > +# Both DFS-ETSI and DFS-FCC are acceptable per AS/NZS 4268 Appendix B > country AU: DFS-ETSI > - (2402 - 2482 @ 40), (20) > - (5170 - 5250 @ 80), (17), AUTO-BW > - (5250 - 5330 @ 80), (24), DFS, AUTO-BW > - (5490 - 5710 @ 160), (24), DFS > - (5735 - 5835 @ 80), (30) > + (2402 - 2482 @ 40), (36) > + (5170 - 5250 @ 80), (23), NO-OUTDOOR, AUTO-BW > + (5250 - 5330 @ 80), (23), NO-OUTDOOR, AUTO-BW, DFS > + (5490 - 5590 @ 80), (30), DFS > + (5650 - 5730 @ 80), (30), DFS > + (5735 - 5835 @ 80), (36) > + (57000 - 66000 @ 2160), (43), NO-OUTDOOR > > country AW: DFS-ETSI > (2402 - 2482 @ 40), (20) > -- > 2.11.0 > ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH] wireless-regdb: Update rules for Australia (AU) and add 60GHz rules 2017-02-22 21:30 ` Seth Forshee @ 2017-02-22 23:05 ` Ryan Mounce 2017-02-23 5:58 ` Johannes Berg 0 siblings, 1 reply; 16+ messages in thread From: Ryan Mounce @ 2017-02-22 23:05 UTC (permalink / raw) To: Seth Forshee; +Cc: wireless-regdb, linux-wireless On 23 February 2017 at 08:00, Seth Forshee <seth.forshee@canonical.com> wrote: > On Sat, Feb 18, 2017 at 05:05:15PM +1030, Ryan Mounce wrote: >> Sourced from the latest legislation at >> https://www.legislation.gov.au/Details/F2016C0043 > > This link isn't working for me. Oops, I truncated that URL. Working link (also in the patch itself): https://www.legislation.gov.au/Details/F2016C00432 >> The current rules exceed legal limits between 5250-5330MHz, and permit >> illegal operation in 5600-5650MHz (reserved for weather radar). > > The changes also increases the limits for most other ranges, by quite a > bit in some cases. Seems that this should also be mentioned in the > changelog, and I'd like to be able to check those changes against the > documentation. All of the updated power limits are converted to dBm but otherwise straight out of the document, so they shouldn't be a problem. I'll update the changelog to note this. The frequency ranges have been "rounded down" to conform with the apparent convention of only including ranges used by standard 802.11 channels, rather than using the actual frequency ranges as has been done for some countries (and most 60GHz rules). My preference is the latter so that there is a clear correlation between the regdb and relevant documentation, and so that the regdb may become useful beyond 802.11. With your blessing as maintainer I will also make this change to the patch. Regards, Ryan Mounce > Thanks, > Seth > >> >> Signed-off-by: Ryan Mounce <ryan@mounce.com.au> >> --- >> db.txt | 15 ++++++++++----- >> 1 file changed, 10 insertions(+), 5 deletions(-) >> >> diff --git a/db.txt b/db.txt >> index 05108e0..b951e0c 100644 >> --- a/db.txt >> +++ b/db.txt >> @@ -85,12 +85,17 @@ country AT: DFS-ETSI >> # 60 GHz band channels 1-4, ref: Etsi En 302 567 >> (57000 - 66000 @ 2160), (40) >> >> +# Source: >> +# https://www.legislation.gov.au/Details/F2016C00432 >> +# Both DFS-ETSI and DFS-FCC are acceptable per AS/NZS 4268 Appendix B >> country AU: DFS-ETSI >> - (2402 - 2482 @ 40), (20) >> - (5170 - 5250 @ 80), (17), AUTO-BW >> - (5250 - 5330 @ 80), (24), DFS, AUTO-BW >> - (5490 - 5710 @ 160), (24), DFS >> - (5735 - 5835 @ 80), (30) >> + (2402 - 2482 @ 40), (36) >> + (5170 - 5250 @ 80), (23), NO-OUTDOOR, AUTO-BW >> + (5250 - 5330 @ 80), (23), NO-OUTDOOR, AUTO-BW, DFS >> + (5490 - 5590 @ 80), (30), DFS >> + (5650 - 5730 @ 80), (30), DFS >> + (5735 - 5835 @ 80), (36) >> + (57000 - 66000 @ 2160), (43), NO-OUTDOOR >> >> country AW: DFS-ETSI >> (2402 - 2482 @ 40), (20) >> -- >> 2.11.0 >> ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH] wireless-regdb: Update rules for Australia (AU) and add 60GHz rules 2017-02-22 23:05 ` Ryan Mounce @ 2017-02-23 5:58 ` Johannes Berg 2017-02-23 13:01 ` Seth Forshee 0 siblings, 1 reply; 16+ messages in thread From: Johannes Berg @ 2017-02-23 5:58 UTC (permalink / raw) To: Ryan Mounce, Seth Forshee; +Cc: wireless-regdb, linux-wireless > The frequency ranges have been "rounded down" to conform with the > apparent convention of only including ranges used by standard 802.11 > channels, rather than using the actual frequency ranges as has been > done for some countries (and most 60GHz rules). My preference is the > latter so that there is a clear correlation between the regdb and > relevant documentation, and so that the regdb may become useful > beyond 802.11. With your blessing as maintainer I will also make this > change to the patch. I think that's just an artifact of the original database source and would also prefer the documented ranges to be used. johannes ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH] wireless-regdb: Update rules for Australia (AU) and add 60GHz rules 2017-02-23 5:58 ` Johannes Berg @ 2017-02-23 13:01 ` Seth Forshee 2017-02-23 13:52 ` [PATCH v2] " Ryan Mounce 0 siblings, 1 reply; 16+ messages in thread From: Seth Forshee @ 2017-02-23 13:01 UTC (permalink / raw) To: Johannes Berg; +Cc: Ryan Mounce, wireless-regdb, linux-wireless On Thu, Feb 23, 2017 at 06:58:45AM +0100, Johannes Berg wrote: > > > The frequency ranges have been "rounded down" to conform with the > > apparent convention of only including ranges used by standard 802.11 > > channels, rather than using the actual frequency ranges as has been > > done for some countries (and most 60GHz rules). My preference is the > > latter so that there is a clear correlation between the regdb and > > relevant documentation, and so that the regdb may become useful > > beyond 802.11. With your blessing as maintainer I will also make this > > change to the patch. > > I think that's just an artifact of the original database source and > would also prefer the documented ranges to be used. Yes, I prefer the documented ranges as well. Thanks, Seth ^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH v2] wireless-regdb: Update rules for Australia (AU) and add 60GHz rules 2017-02-23 13:01 ` Seth Forshee @ 2017-02-23 13:52 ` Ryan Mounce 2017-02-23 15:35 ` Seth Forshee 0 siblings, 1 reply; 16+ messages in thread From: Ryan Mounce @ 2017-02-23 13:52 UTC (permalink / raw) To: seth.forshee; +Cc: wireless-regdb, linux-wireless Sourced from the current legislation at https://www.legislation.gov.au/Details/F2016C00432 The current rules exceed legal limits between 5250-5330MHz, and permit illegal operation in 5600-5650MHz (disallowed regardless of DFS). Frequency ranges and EIRP limits for all ranges have been updated to match items 59-63, 65 in the linked document. As the rules for AU have never previously mirrored local regulations, changes include a significant increase in the allowable 2.4GHz EIRP and smaller increases in most other bands. In order to allow 80MHz operation between 5650-5730MHz (bordering two bands) the lower, more restrictive band has been rounded up by 5MHz. Signed-off-by: Ryan Mounce <ryan@mounce.com.au> --- db.txt | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) diff --git a/db.txt b/db.txt index 05108e0..00e81b6 100644 --- a/db.txt +++ b/db.txt @@ -85,12 +85,17 @@ country AT: DFS-ETSI # 60 GHz band channels 1-4, ref: Etsi En 302 567 (57000 - 66000 @ 2160), (40) +# Source: +# https://www.legislation.gov.au/Details/F2016C00432 +# Both DFS-ETSI and DFS-FCC are acceptable per AS/NZS 4268 Appendix B country AU: DFS-ETSI - (2402 - 2482 @ 40), (20) - (5170 - 5250 @ 80), (17), AUTO-BW - (5250 - 5330 @ 80), (24), DFS, AUTO-BW - (5490 - 5710 @ 160), (24), DFS - (5735 - 5835 @ 80), (30) + (2400 - 2483.5 @ 40), (36) + (5150 - 5250 @ 80), (23), NO-OUTDOOR, AUTO-BW + (5250 - 5350 @ 80), (23), NO-OUTDOOR, AUTO-BW, DFS + (5470 - 5600 @ 80), (30), DFS + (5650 - 5730 @ 80), (30), DFS + (5730 - 5850 @ 80), (36) + (57000 - 66000 @ 2160), (43), NO-OUTDOOR country AW: DFS-ETSI (2402 - 2482 @ 40), (20) -- 2.11.0 ^ permalink raw reply related [flat|nested] 16+ messages in thread
* Re: [PATCH v2] wireless-regdb: Update rules for Australia (AU) and add 60GHz rules 2017-02-23 13:52 ` [PATCH v2] " Ryan Mounce @ 2017-02-23 15:35 ` Seth Forshee 2017-02-24 2:50 ` Ryan Mounce 0 siblings, 1 reply; 16+ messages in thread From: Seth Forshee @ 2017-02-23 15:35 UTC (permalink / raw) To: Ryan Mounce; +Cc: wireless-regdb, linux-wireless, Johannes Berg On Fri, Feb 24, 2017 at 12:22:53AM +1030, Ryan Mounce wrote: > Sourced from the current legislation at > https://www.legislation.gov.au/Details/F2016C00432 > > The current rules exceed legal limits between 5250-5330MHz, and permit > illegal operation in 5600-5650MHz (disallowed regardless of DFS). > > Frequency ranges and EIRP limits for all ranges have been updated to > match items 59-63, 65 in the linked document. As the rules for AU have > never previously mirrored local regulations, changes include a > significant increase in the allowable 2.4GHz EIRP and smaller increases > in most other bands. > > In order to allow 80MHz operation between 5650-5730MHz (bordering two > bands) the lower, more restrictive band has been rounded up by 5MHz. > > Signed-off-by: Ryan Mounce <ryan@mounce.com.au> > --- > db.txt | 15 ++++++++++----- > 1 file changed, 10 insertions(+), 5 deletions(-) > > diff --git a/db.txt b/db.txt > index 05108e0..00e81b6 100644 > --- a/db.txt > +++ b/db.txt > @@ -85,12 +85,17 @@ country AT: DFS-ETSI > # 60 GHz band channels 1-4, ref: Etsi En 302 567 > (57000 - 66000 @ 2160), (40) > > +# Source: > +# https://www.legislation.gov.au/Details/F2016C00432 > +# Both DFS-ETSI and DFS-FCC are acceptable per AS/NZS 4268 Appendix B > country AU: DFS-ETSI > - (2402 - 2482 @ 40), (20) > - (5170 - 5250 @ 80), (17), AUTO-BW > - (5250 - 5330 @ 80), (24), DFS, AUTO-BW > - (5490 - 5710 @ 160), (24), DFS > - (5735 - 5835 @ 80), (30) > + (2400 - 2483.5 @ 40), (36) The mention of ETSI EN 300 328 in item 55 (a) leads me to believe that this is the limit we should be using, i.e. 500 mW. It is a bit confusing though since it seems like such devices would also fall under "digital modulation transmitters." > + (5150 - 5250 @ 80), (23), NO-OUTDOOR, AUTO-BW This looks correct. > + (5250 - 5350 @ 80), (23), NO-OUTDOOR, AUTO-BW, DFS Since this range requires TPC we need to set the power limit at 100 mW. > + (5470 - 5600 @ 80), (30), DFS > + (5650 - 5730 @ 80), (30), DFS These ranges also require TPC so we need to set the limit at 500 mW. > + (5730 - 5850 @ 80), (36) In the document the ranges are 5650-5725 MHz and 5725-5850 MHz. I suspect that the existing rules fudge that to line up with the wifi channels, which technically is okay because the rules in the former range are more restrictive. I wonder if we shouldn't be recording them here as per the document and adding AUTO-BW. Johannes, any thoughts? > + (57000 - 66000 @ 2160), (43), NO-OUTDOOR This looks correct. Thanks, Seth ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH v2] wireless-regdb: Update rules for Australia (AU) and add 60GHz rules 2017-02-23 15:35 ` Seth Forshee @ 2017-02-24 2:50 ` Ryan Mounce 2017-02-24 14:55 ` Seth Forshee 0 siblings, 1 reply; 16+ messages in thread From: Ryan Mounce @ 2017-02-24 2:50 UTC (permalink / raw) To: Seth Forshee; +Cc: wireless-regdb, linux-wireless, Johannes Berg On 24 February 2017 at 02:05, Seth Forshee <seth.forshee@canonical.com> wrote: > On Fri, Feb 24, 2017 at 12:22:53AM +1030, Ryan Mounce wrote: >> Sourced from the current legislation at >> https://www.legislation.gov.au/Details/F2016C00432 >> >> The current rules exceed legal limits between 5250-5330MHz, and permit >> illegal operation in 5600-5650MHz (disallowed regardless of DFS). >> >> Frequency ranges and EIRP limits for all ranges have been updated to >> match items 59-63, 65 in the linked document. As the rules for AU have >> never previously mirrored local regulations, changes include a >> significant increase in the allowable 2.4GHz EIRP and smaller increases >> in most other bands. >> >> In order to allow 80MHz operation between 5650-5730MHz (bordering two >> bands) the lower, more restrictive band has been rounded up by 5MHz. >> >> Signed-off-by: Ryan Mounce <ryan@mounce.com.au> >> --- >> db.txt | 15 ++++++++++----- >> 1 file changed, 10 insertions(+), 5 deletions(-) >> >> diff --git a/db.txt b/db.txt >> index 05108e0..00e81b6 100644 >> --- a/db.txt >> +++ b/db.txt >> @@ -85,12 +85,17 @@ country AT: DFS-ETSI >> # 60 GHz band channels 1-4, ref: Etsi En 302 567 >> (57000 - 66000 @ 2160), (40) >> >> +# Source: >> +# https://www.legislation.gov.au/Details/F2016C00432 >> +# Both DFS-ETSI and DFS-FCC are acceptable per AS/NZS 4268 Appendix B >> country AU: DFS-ETSI >> - (2402 - 2482 @ 40), (20) >> - (5170 - 5250 @ 80), (17), AUTO-BW >> - (5250 - 5330 @ 80), (24), DFS, AUTO-BW >> - (5490 - 5710 @ 160), (24), DFS >> - (5735 - 5835 @ 80), (30) >> + (2400 - 2483.5 @ 40), (36) > > The mention of ETSI EN 300 328 in item 55 (a) leads me to believe that > this is the limit we should be using, i.e. 500 mW. It is a bit confusing > though since it seems like such devices would also fall under "digital > modulation transmitters." Item 55 applies only to frequency hopping transmitters e.g. Bluetooth. As a local, I can say with some degree of certainty that 4W/36dBm is the correct 2.4GHz ISM EIRP for Australia. It is advertised as the EIRP in the 802.11d IE of commercial devices e.g. Cisco Aironet APs and widely deployed ISP gateways in Australia, among other devices that have received relevant approvals. >> + (5150 - 5250 @ 80), (23), NO-OUTDOOR, AUTO-BW > > This looks correct. > >> + (5250 - 5350 @ 80), (23), NO-OUTDOOR, AUTO-BW, DFS > > Since this range requires TPC we need to set the power limit at 100 mW. > >> + (5470 - 5600 @ 80), (30), DFS >> + (5650 - 5730 @ 80), (30), DFS > > These ranges also require TPC so we need to set the limit at 500 mW. I was unsure about this one. Setting this to 27dBm also affects the 802.11d country information IE, however when the DFS flag is set a 3dB 802.11h power constraint IE is also advertised so stations will limit themselves to (27-3)=24dBm/250mW. Given the choice between unnecessarily halving transmit power on stations and potentially transmitting at twice the permissible power on APs without TPC I agree that the conservative approach should be taken for now. Ideally I think that the actual EIRP limits should be in the regdb and a 3dB constraint should be applied automatically on APs that cannot support TPC when the DFS flag is set. >> + (5730 - 5850 @ 80), (36) > > In the document the ranges are 5650-5725 MHz and 5725-5850 MHz. I > suspect that the existing rules fudge that to line up with the wifi > channels, which technically is okay because the rules in the former > range are more restrictive. I wonder if we shouldn't be recording them > here as per the document and adding AUTO-BW. Johannes, any thoughts? I've tested with AUTO-BW and it doesn't work in this case as channel 144 will be disabled if it doesn't exist entirely within one band. Fudging the more restrictive rules by a mere 5MHz to fit 802.11 channels seems to be the status quo. >> + (57000 - 66000 @ 2160), (43), NO-OUTDOOR > > This looks correct. > > Thanks, > Seth Regards, Ryan Mounce ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH v2] wireless-regdb: Update rules for Australia (AU) and add 60GHz rules 2017-02-24 2:50 ` Ryan Mounce @ 2017-02-24 14:55 ` Seth Forshee 2017-02-25 3:10 ` [PATCH v3] " Ryan Mounce 0 siblings, 1 reply; 16+ messages in thread From: Seth Forshee @ 2017-02-24 14:55 UTC (permalink / raw) To: Ryan Mounce; +Cc: wireless-regdb, linux-wireless, Johannes Berg On Fri, Feb 24, 2017 at 01:20:24PM +1030, Ryan Mounce wrote: > On 24 February 2017 at 02:05, Seth Forshee <seth.forshee@canonical.com> wrote: > > On Fri, Feb 24, 2017 at 12:22:53AM +1030, Ryan Mounce wrote: > >> Sourced from the current legislation at > >> https://www.legislation.gov.au/Details/F2016C00432 > >> > >> The current rules exceed legal limits between 5250-5330MHz, and permit > >> illegal operation in 5600-5650MHz (disallowed regardless of DFS). > >> > >> Frequency ranges and EIRP limits for all ranges have been updated to > >> match items 59-63, 65 in the linked document. As the rules for AU have > >> never previously mirrored local regulations, changes include a > >> significant increase in the allowable 2.4GHz EIRP and smaller increases > >> in most other bands. > >> > >> In order to allow 80MHz operation between 5650-5730MHz (bordering two > >> bands) the lower, more restrictive band has been rounded up by 5MHz. > >> > >> Signed-off-by: Ryan Mounce <ryan@mounce.com.au> > >> --- > >> db.txt | 15 ++++++++++----- > >> 1 file changed, 10 insertions(+), 5 deletions(-) > >> > >> diff --git a/db.txt b/db.txt > >> index 05108e0..00e81b6 100644 > >> --- a/db.txt > >> +++ b/db.txt > >> @@ -85,12 +85,17 @@ country AT: DFS-ETSI > >> # 60 GHz band channels 1-4, ref: Etsi En 302 567 > >> (57000 - 66000 @ 2160), (40) > >> > >> +# Source: > >> +# https://www.legislation.gov.au/Details/F2016C00432 > >> +# Both DFS-ETSI and DFS-FCC are acceptable per AS/NZS 4268 Appendix B > >> country AU: DFS-ETSI > >> - (2402 - 2482 @ 40), (20) > >> - (5170 - 5250 @ 80), (17), AUTO-BW > >> - (5250 - 5330 @ 80), (24), DFS, AUTO-BW > >> - (5490 - 5710 @ 160), (24), DFS > >> - (5735 - 5835 @ 80), (30) > >> + (2400 - 2483.5 @ 40), (36) > > > > The mention of ETSI EN 300 328 in item 55 (a) leads me to believe that > > this is the limit we should be using, i.e. 500 mW. It is a bit confusing > > though since it seems like such devices would also fall under "digital > > modulation transmitters." > > Item 55 applies only to frequency hopping transmitters e.g. Bluetooth. > As a local, I can say with some degree of certainty that 4W/36dBm is > the correct 2.4GHz ISM EIRP for Australia. It is advertised as the > EIRP in the 802.11d IE of commercial devices e.g. Cisco Aironet APs > and widely deployed ISP gateways in Australia, among other devices > that have received relevant approvals. Okay, looking at that section again that makes sense. > >> + (5150 - 5250 @ 80), (23), NO-OUTDOOR, AUTO-BW > > > > This looks correct. > > > >> + (5250 - 5350 @ 80), (23), NO-OUTDOOR, AUTO-BW, DFS > > > > Since this range requires TPC we need to set the power limit at 100 mW. > > > >> + (5470 - 5600 @ 80), (30), DFS > >> + (5650 - 5730 @ 80), (30), DFS > > > > These ranges also require TPC so we need to set the limit at 500 mW. > > I was unsure about this one. Setting this to 27dBm also affects the > 802.11d country information IE, however when the DFS flag is set a 3dB > 802.11h power constraint IE is also advertised so stations will limit > themselves to (27-3)=24dBm/250mW. > > Given the choice between unnecessarily halving transmit power on > stations and potentially transmitting at twice the permissible power > on APs without TPC I agree that the conservative approach should be > taken for now. Ideally I think that the actual EIRP limits should be > in the regdb and a 3dB constraint should be applied automatically on > APs that cannot support TPC when the DFS flag is set. > > >> + (5730 - 5850 @ 80), (36) > > > > In the document the ranges are 5650-5725 MHz and 5725-5850 MHz. I > > suspect that the existing rules fudge that to line up with the wifi > > channels, which technically is okay because the rules in the former > > range are more restrictive. I wonder if we shouldn't be recording them > > here as per the document and adding AUTO-BW. Johannes, any thoughts? > > I've tested with AUTO-BW and it doesn't work in this case as channel > 144 will be disabled if it doesn't exist entirely within one band. > Fudging the more restrictive rules by a mere 5MHz to fit 802.11 > channels seems to be the status quo. I wonder why AUTO-BW doesn't work. In that case it's certainly fine to keep those ranges as they are. Thanks, Seth ^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH v3] wireless-regdb: Update rules for Australia (AU) and add 60GHz rules 2017-02-24 14:55 ` Seth Forshee @ 2017-02-25 3:10 ` Ryan Mounce 2017-03-01 14:59 ` Seth Forshee 2017-03-07 13:11 ` Seth Forshee 0 siblings, 2 replies; 16+ messages in thread From: Ryan Mounce @ 2017-02-25 3:10 UTC (permalink / raw) To: seth.forshee; +Cc: wireless-regdb, linux-wireless Sourced from the current legislation at https://www.legislation.gov.au/Details/F2016C00432 The current rules exceed legal limits between 5250-5330MHz, and permit illegal operation in 5600-5650MHz (disallowed regardless of DFS). Frequency ranges and EIRP limits for all ranges have been updated to match items 59-63, 65 in the linked document. As the rules for AU have never previously mirrored local regulations, changes include a significant increase in the allowable 2.4GHz EIRP and smaller increases in most other bands. In order to allow 80MHz operation between 5650-5730MHz (bordering two bands) the lower, more restrictive band has been rounded up by 5MHz. Signed-off-by: Ryan Mounce <ryan@mounce.com.au> --- db.txt | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-) diff --git a/db.txt b/db.txt index 05108e0..0f1e151 100644 --- a/db.txt +++ b/db.txt @@ -85,12 +85,20 @@ country AT: DFS-ETSI # 60 GHz band channels 1-4, ref: Etsi En 302 567 (57000 - 66000 @ 2160), (40) +# Source: +# https://www.legislation.gov.au/Details/F2016C00432 +# Both DFS-ETSI and DFS-FCC are acceptable per AS/NZS 4268 Appendix B. +# The EIRP for DFS bands can be increased by 3dB if TPC is implemented. +# In order to allow 80MHz operation between 5650-5730MHz the upper boundary +# of this more restrictive band has been shifted up by 5MHz from 5725MHz. country AU: DFS-ETSI - (2402 - 2482 @ 40), (20) - (5170 - 5250 @ 80), (17), AUTO-BW - (5250 - 5330 @ 80), (24), DFS, AUTO-BW - (5490 - 5710 @ 160), (24), DFS - (5735 - 5835 @ 80), (30) + (2400 - 2483.5 @ 40), (36) + (5150 - 5250 @ 80), (23), NO-OUTDOOR, AUTO-BW + (5250 - 5350 @ 80), (20), NO-OUTDOOR, AUTO-BW, DFS + (5470 - 5600 @ 80), (27), DFS + (5650 - 5730 @ 80), (27), DFS + (5730 - 5850 @ 80), (36) + (57000 - 66000 @ 2160), (43), NO-OUTDOOR country AW: DFS-ETSI (2402 - 2482 @ 40), (20) -- 2.11.0 ^ permalink raw reply related [flat|nested] 16+ messages in thread
* Re: [PATCH v3] wireless-regdb: Update rules for Australia (AU) and add 60GHz rules 2017-02-25 3:10 ` [PATCH v3] " Ryan Mounce @ 2017-03-01 14:59 ` Seth Forshee 2017-03-07 13:11 ` Seth Forshee 1 sibling, 0 replies; 16+ messages in thread From: Seth Forshee @ 2017-03-01 14:59 UTC (permalink / raw) To: Ryan Mounce; +Cc: wireless-regdb, linux-wireless On Sat, Feb 25, 2017 at 01:40:27PM +1030, Ryan Mounce wrote: > Sourced from the current legislation at > https://www.legislation.gov.au/Details/F2016C00432 > > The current rules exceed legal limits between 5250-5330MHz, and permit > illegal operation in 5600-5650MHz (disallowed regardless of DFS). > > Frequency ranges and EIRP limits for all ranges have been updated to > match items 59-63, 65 in the linked document. As the rules for AU have > never previously mirrored local regulations, changes include a > significant increase in the allowable 2.4GHz EIRP and smaller increases > in most other bands. > > In order to allow 80MHz operation between 5650-5730MHz (bordering two > bands) the lower, more restrictive band has been rounded up by 5MHz. > > Signed-off-by: Ryan Mounce <ryan@mounce.com.au> This looks good to me. I'll give it a few more days to see if anyone else has comments. Thanks, Seth ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH v3] wireless-regdb: Update rules for Australia (AU) and add 60GHz rules 2017-02-25 3:10 ` [PATCH v3] " Ryan Mounce 2017-03-01 14:59 ` Seth Forshee @ 2017-03-07 13:11 ` Seth Forshee 1 sibling, 0 replies; 16+ messages in thread From: Seth Forshee @ 2017-03-07 13:11 UTC (permalink / raw) To: Ryan Mounce; +Cc: wireless-regdb, linux-wireless On Sat, Feb 25, 2017 at 01:40:27PM +1030, Ryan Mounce wrote: > Sourced from the current legislation at > https://www.legislation.gov.au/Details/F2016C00432 > > The current rules exceed legal limits between 5250-5330MHz, and permit > illegal operation in 5600-5650MHz (disallowed regardless of DFS). > > Frequency ranges and EIRP limits for all ranges have been updated to > match items 59-63, 65 in the linked document. As the rules for AU have > never previously mirrored local regulations, changes include a > significant increase in the allowable 2.4GHz EIRP and smaller increases > in most other bands. > > In order to allow 80MHz operation between 5650-5730MHz (bordering two > bands) the lower, more restrictive band has been rounded up by 5MHz. > > Signed-off-by: Ryan Mounce <ryan@mounce.com.au> Applied, thanks. ^ permalink raw reply [flat|nested] 16+ messages in thread
end of thread, other threads:[~2017-03-07 13:20 UTC | newest] Thread overview: 16+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2017-02-18 6:35 [PATCH] wireless-regdb: Update rules for Australia (AU) and add 60GHz rules Ryan Mounce 2017-02-18 20:45 ` Sebastian Gottschall 2017-02-19 0:01 ` Ryan Mounce 2017-02-19 12:16 ` Sebastian Gottschall 2017-02-19 12:36 ` Ryan Mounce 2017-02-22 21:30 ` Seth Forshee 2017-02-22 23:05 ` Ryan Mounce 2017-02-23 5:58 ` Johannes Berg 2017-02-23 13:01 ` Seth Forshee 2017-02-23 13:52 ` [PATCH v2] " Ryan Mounce 2017-02-23 15:35 ` Seth Forshee 2017-02-24 2:50 ` Ryan Mounce 2017-02-24 14:55 ` Seth Forshee 2017-02-25 3:10 ` [PATCH v3] " Ryan Mounce 2017-03-01 14:59 ` Seth Forshee 2017-03-07 13:11 ` Seth Forshee
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).