From: Ian Molton <ian@mnementh.co.uk>
To: linux-wireless@vger.kernel.org
Cc: arend.vanspriel@broadcom.com, franky.lin@broadcom.com,
hante.meuleman@broadcom.com
Subject: [PATCH 32/34] brcmfmac: Replace function index with function pointer
Date: Wed, 19 Jul 2017 20:08:20 +0100 [thread overview]
Message-ID: <20170719190822.10857-33-ian@mnementh.co.uk> (raw)
In-Reply-To: <20170719190822.10857-1-ian@mnementh.co.uk>
In preparation for removing the function array, remove all code that
refers to function by index and replace with pointers to the function
itself.
Signed-off-by: Ian Molton <ian@mnementh.co.uk>
---
.../wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c | 69 +++++++++++-----------
.../wireless/broadcom/brcm80211/brcmfmac/sdio.c | 14 ++---
.../wireless/broadcom/brcm80211/brcmfmac/sdio.h | 14 ++---
3 files changed, 49 insertions(+), 48 deletions(-)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
index 89cf71d98cee..43a9c28738b3 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
@@ -148,7 +148,7 @@ int brcmf_sdiod_intr_register(struct brcmf_sdio_dev *sdiodev)
/* must configure SDIO_CCCR_IENx to enable irq */
data = brcmf_sdiod_func0_rb(sdiodev, SDIO_CCCR_IENx, &ret);
- data |= 1 << SDIO_FUNC_1 | 1 << SDIO_FUNC_2 | 1;
+ data |= SDIO_CCCR_IEN_FUNC1 | SDIO_CCCR_IEN_FUNC2 | SDIO_CCCR_IEN_BIT0;
brcmf_sdiod_func0_wb(sdiodev, SDIO_CCCR_IENx, data, &ret);
/* redirect, configure and enable io for interrupt signal */
@@ -290,7 +290,8 @@ void brcmf_sdiod_writel(struct brcmf_sdio_dev *sdiodev, u32 addr,
*ret = retval;
}
-static int brcmf_sdiod_buff_read(struct brcmf_sdio_dev *sdiodev, uint fn,
+static int brcmf_sdiod_buff_read(struct brcmf_sdio_dev *sdiodev,
+ struct sdio_func *func,
u32 addr, struct sk_buff *pkt)
{
unsigned int req_sz;
@@ -300,13 +301,12 @@ static int brcmf_sdiod_buff_read(struct brcmf_sdio_dev *sdiodev, uint fn,
req_sz = pkt->len + 3;
req_sz &= (uint)~3;
- if (fn == 1)
- err = sdio_memcpy_fromio(sdiodev->func[fn],
- ((u8 *)(pkt->data)), addr, req_sz);
+ if (func->num == 1)
+ err = sdio_memcpy_fromio(func, ((u8 *)(pkt->data)), addr,
+ req_sz);
else
/* function 2 read is FIFO operation */
- err = sdio_readsb(sdiodev->func[fn],
- ((u8 *)(pkt->data)), addr, req_sz);
+ err = sdio_readsb(func, ((u8 *)(pkt->data)), addr, req_sz);
if (err == -ENOMEDIUM)
brcmf_sdiod_change_state(sdiodev, BRCMF_SDIOD_NOMEDIUM);
@@ -314,7 +314,8 @@ static int brcmf_sdiod_buff_read(struct brcmf_sdio_dev *sdiodev, uint fn,
return err;
}
-static int brcmf_sdiod_buff_write(struct brcmf_sdio_dev *sdiodev, uint fn,
+static int brcmf_sdiod_buff_write(struct brcmf_sdio_dev *sdiodev,
+ struct sdio_func *func,
u32 addr, struct sk_buff *pkt)
{
unsigned int req_sz;
@@ -324,8 +325,7 @@ static int brcmf_sdiod_buff_write(struct brcmf_sdio_dev *sdiodev, uint fn,
req_sz = pkt->len + 3;
req_sz &= (uint)~3;
- err = sdio_memcpy_toio(sdiodev->func[fn], addr,
- ((u8 *)(pkt->data)), req_sz);
+ err = sdio_memcpy_toio(func, addr, ((u8 *)(pkt->data)), req_sz);
if (err == -ENOMEDIUM)
brcmf_sdiod_change_state(sdiodev, BRCMF_SDIOD_NOMEDIUM);
@@ -336,7 +336,7 @@ static int brcmf_sdiod_buff_write(struct brcmf_sdio_dev *sdiodev, uint fn,
/**
* brcmf_sdiod_sglist_rw - SDIO interface function for block data access
* @sdiodev: brcmfmac sdio device
- * @fn: SDIO function number
+ * @func: SDIO function
* @write: direction flag
* @addr: dongle memory address as source/destination
* @pkt: skb pointer
@@ -345,9 +345,10 @@ static int brcmf_sdiod_buff_write(struct brcmf_sdio_dev *sdiodev, uint fn,
* stack for block data access. It assumes that the skb passed down by the
* caller has already been padded and aligned.
*/
-static int brcmf_sdiod_sglist_rw(struct brcmf_sdio_dev *sdiodev, uint fn,
- bool write, u32 addr,
- struct sk_buff_head *pktlist)
+static int brcmf_sdiod_sglist_rw(struct brcmf_sdio_dev *sdiodev,
+ struct sdio_func *func,
+ bool write, u32 addr,
+ struct sk_buff_head *pktlist)
{
unsigned int req_sz, func_blk_sz, sg_cnt, sg_data_sz, pkt_offset;
unsigned int max_req_sz, orig_offset, dst_offset;
@@ -371,7 +372,7 @@ static int brcmf_sdiod_sglist_rw(struct brcmf_sdio_dev *sdiodev, uint fn,
req_sz = 0;
skb_queue_walk(pktlist, pkt_next)
req_sz += pkt_next->len;
- req_sz = ALIGN(req_sz, sdiodev->func[fn]->cur_blksize);
+ req_sz = ALIGN(req_sz, func->cur_blksize);
while (req_sz > PAGE_SIZE) {
pkt_next = brcmu_pkt_buf_get_skb(PAGE_SIZE);
if (pkt_next == NULL) {
@@ -390,7 +391,7 @@ static int brcmf_sdiod_sglist_rw(struct brcmf_sdio_dev *sdiodev, uint fn,
target_list = &local_list;
}
- func_blk_sz = sdiodev->func[fn]->cur_blksize;
+ func_blk_sz = func->cur_blksize;
max_req_sz = sdiodev->max_request_size;
max_seg_cnt = min_t(unsigned short, sdiodev->max_segment_count,
target_list->qlen);
@@ -407,10 +408,10 @@ static int brcmf_sdiod_sglist_rw(struct brcmf_sdio_dev *sdiodev, uint fn,
mmc_dat.flags = write ? MMC_DATA_WRITE : MMC_DATA_READ;
mmc_cmd.opcode = SD_IO_RW_EXTENDED;
mmc_cmd.arg = write ? 1<<31 : 0; /* write flag */
- mmc_cmd.arg |= (fn & 0x7) << 28; /* SDIO func num */
+ mmc_cmd.arg |= (func->num & 0x7) << 28; /* SDIO func num */
mmc_cmd.arg |= 1<<27; /* block mode */
/* for function 1 the addr will be incremented */
- mmc_cmd.arg |= (fn == 1) ? 1<<26 : 0;
+ mmc_cmd.arg |= (func->num == 1) ? 1<<26 : 0;
mmc_cmd.flags = MMC_RSP_SPI_R5 | MMC_RSP_R5 | MMC_CMD_ADTC;
mmc_req.cmd = &mmc_cmd;
mmc_req.data = &mmc_dat;
@@ -456,11 +457,11 @@ static int brcmf_sdiod_sglist_rw(struct brcmf_sdio_dev *sdiodev, uint fn,
mmc_cmd.arg |= (addr & 0x1FFFF) << 9; /* address */
mmc_cmd.arg |= mmc_dat.blocks & 0x1FF; /* block count */
/* incrementing addr for function 1 */
- if (fn == 1)
+ if (func->num == 1)
addr += req_sz;
- mmc_set_data_timeout(&mmc_dat, sdiodev->func[fn]->card);
- mmc_wait_for_req(sdiodev->func[fn]->card->host, &mmc_req);
+ mmc_set_data_timeout(&mmc_dat, func->card);
+ mmc_wait_for_req(func->card->host, &mmc_req);
ret = mmc_cmd.error ? mmc_cmd.error : mmc_dat.error;
if (ret == -ENOMEDIUM) {
@@ -540,7 +541,7 @@ int brcmf_sdiod_recv_pkt(struct brcmf_sdio_dev *sdiodev, struct sk_buff *pkt)
addr &= SBSDIO_SB_OFT_ADDR_MASK;
addr |= SBSDIO_SB_ACCESS_2_4B_FLAG;
- err = brcmf_sdiod_buff_read(sdiodev, SDIO_FUNC_2, addr, pkt);
+ err = brcmf_sdiod_buff_read(sdiodev, sdiodev->func[2], addr, pkt);
done:
return err;
@@ -565,13 +566,13 @@ int brcmf_sdiod_recv_chain(struct brcmf_sdio_dev *sdiodev,
addr |= SBSDIO_SB_ACCESS_2_4B_FLAG;
if (pktq->qlen == 1)
- err = brcmf_sdiod_buff_read(sdiodev, SDIO_FUNC_2, addr,
+ err = brcmf_sdiod_buff_read(sdiodev, sdiodev->func[2], addr,
pktq->next);
else if (!sdiodev->sg_support) {
glom_skb = brcmu_pkt_buf_get_skb(totlen);
if (!glom_skb)
return -ENOMEM;
- err = brcmf_sdiod_buff_read(sdiodev, SDIO_FUNC_2, addr,
+ err = brcmf_sdiod_buff_read(sdiodev, sdiodev->func[2], addr,
glom_skb);
if (err)
goto done;
@@ -581,7 +582,7 @@ int brcmf_sdiod_recv_chain(struct brcmf_sdio_dev *sdiodev,
skb_pull(glom_skb, skb->len);
}
} else
- err = brcmf_sdiod_sglist_rw(sdiodev, SDIO_FUNC_2, false, addr,
+ err = brcmf_sdiod_sglist_rw(sdiodev, sdiodev->func[2], false, addr,
pktq);
done:
@@ -613,7 +614,7 @@ int brcmf_sdiod_send_buf(struct brcmf_sdio_dev *sdiodev, u8 *buf, uint nbytes)
addr |= SBSDIO_SB_ACCESS_2_4B_FLAG;
if (!err)
- err = brcmf_sdiod_buff_write(sdiodev, SDIO_FUNC_2, addr, mypkt);
+ err = brcmf_sdiod_buff_write(sdiodev, sdiodev->func[2], addr, mypkt);
brcmu_pkt_buf_free_skb(mypkt);
@@ -639,13 +640,13 @@ int brcmf_sdiod_send_pkt(struct brcmf_sdio_dev *sdiodev,
if (pktq->qlen == 1 || !sdiodev->sg_support)
skb_queue_walk(pktq, skb) {
- err = brcmf_sdiod_buff_write(sdiodev, SDIO_FUNC_2,
+ err = brcmf_sdiod_buff_write(sdiodev, sdiodev->func[2],
addr, skb);
if (err)
break;
}
else
- err = brcmf_sdiod_sglist_rw(sdiodev, SDIO_FUNC_2, true, addr,
+ err = brcmf_sdiod_sglist_rw(sdiodev, sdiodev->func[2], true, addr,
pktq);
return err;
@@ -695,11 +696,11 @@ brcmf_sdiod_ramrw(struct brcmf_sdio_dev *sdiodev, bool write, u32 address,
if (write) {
memcpy(pkt->data, data, dsize);
- err = brcmf_sdiod_buff_write(sdiodev, SDIO_FUNC_1,
+ err = brcmf_sdiod_buff_write(sdiodev, sdiodev->func[1],
sdaddr, pkt);
}
else {
- err = brcmf_sdiod_buff_read(sdiodev, SDIO_FUNC_1,
+ err = brcmf_sdiod_buff_read(sdiodev, sdiodev->func[1],
sdaddr, pkt);
}
@@ -728,12 +729,12 @@ brcmf_sdiod_ramrw(struct brcmf_sdio_dev *sdiodev, bool write, u32 address,
return err;
}
-int brcmf_sdiod_abort(struct brcmf_sdio_dev *sdiodev, u8 fn)
+int brcmf_sdiod_abort(struct brcmf_sdio_dev *sdiodev, struct sdio_func *func)
{
brcmf_dbg(SDIO, "Enter\n");
/* Issue abort cmd52 command through F0 */
- brcmf_sdiod_func0_wb(sdiodev, SDIO_CCCR_ABORT, fn, NULL);
+ brcmf_sdiod_func0_wb(sdiodev, SDIO_CCCR_ABORT, func->num, NULL);
brcmf_dbg(SDIO, "Exit\n");
return 0;
@@ -1104,7 +1105,7 @@ static int brcmf_ops_sdio_suspend(struct device *dev)
func = container_of(dev, struct sdio_func, dev);
brcmf_dbg(SDIO, "Enter: F%d\n", func->num);
- if (func->num != SDIO_FUNC_1)
+ if (func->num != 1)
return 0;
@@ -1133,7 +1134,7 @@ static int brcmf_ops_sdio_resume(struct device *dev)
struct sdio_func *func = container_of(dev, struct sdio_func, dev);
brcmf_dbg(SDIO, "Enter: F%d\n", func->num);
- if (func->num != SDIO_FUNC_2)
+ if (func->num != 2)
return 0;
brcmf_sdiod_freezer_off(sdiodev);
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
index 9b8bd870c1fc..c94625b6549f 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
@@ -1144,7 +1144,7 @@ static void brcmf_sdio_rxfail(struct brcmf_sdio *bus, bool abort, bool rtx)
rtx ? ", send NAK" : "");
if (abort)
- brcmf_sdiod_abort(bus->sdiodev, SDIO_FUNC_2);
+ brcmf_sdiod_abort(bus->sdiodev, bus->sdiodev->func[2]);
brcmf_sdiod_writeb(bus->sdiodev, SBSDIO_FUNC1_FRAMECTRL, SFC_RF_TERM, &err);
bus->sdcnt.f1regdata++;
@@ -1193,7 +1193,7 @@ static void brcmf_sdio_txfail(struct brcmf_sdio *bus)
brcmf_err("sdio error, abort command and terminate frame\n");
bus->sdcnt.tx_sderrs++;
- brcmf_sdiod_abort(sdiodev, SDIO_FUNC_2);
+ brcmf_sdiod_abort(sdiodev, sdiodev->func[2]);
brcmf_sdiod_writeb(sdiodev, SBSDIO_FUNC1_FRAMECTRL, SFC_WF_TERM, NULL);
bus->sdcnt.f1regdata++;
@@ -2055,7 +2055,7 @@ static int brcmf_sdio_txpkt_prep_sg(struct brcmf_sdio *bus,
int ntail, ret;
sdiodev = bus->sdiodev;
- blksize = sdiodev->func[SDIO_FUNC_2]->cur_blksize;
+ blksize = sdiodev->func[2]->cur_blksize;
/* sg entry alignment should be a divisor of block size */
WARN_ON(blksize % bus->sgentry_align);
@@ -2423,7 +2423,7 @@ static void brcmf_sdio_bus_stop(struct device *dev)
/* Turn off the bus (F2), free any pending packets */
brcmf_dbg(INTR, "disable SDIO interrupts\n");
- sdio_disable_func(sdiodev->func[SDIO_FUNC_2]);
+ sdio_disable_func(sdiodev->func[2]);
/* Clear any pending interrupts now that F2 is disabled */
brcmf_sdiod_writel(sdiodev, core->base + __sd_reg(intstatus),
@@ -4024,7 +4024,7 @@ static void brcmf_sdio_firmware_callback(struct device *dev, int err,
brcmf_sdiod_writel(sdiod, core->base + __sd_reg(tosbmailboxdata),
SDPCM_PROT_VERSION << SMB_DATA_VERSION_SHIFT, NULL);
- err = sdio_enable_func(sdiodev->func[SDIO_FUNC_2]);
+ err = sdio_enable_func(sdiodev->func[2]);
brcmf_dbg(INFO, "enable F2: err=%d\n", err);
@@ -4040,7 +4040,7 @@ static void brcmf_sdio_firmware_callback(struct device *dev, int err,
brcmf_sdiod_writeb(sdiodev, SBSDIO_WATERMARK, 8, &err);
} else {
/* Disable F2 again */
- sdio_disable_func(sdiodev->func[SDIO_FUNC_2]);
+ sdio_disable_func(sdiodev->func[2]);
goto release;
}
@@ -4183,7 +4183,7 @@ struct brcmf_sdio *brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev)
sdio_claim_host(bus->sdiodev->func[1]);
/* Disable F2 to clear any intermediate frame state on the dongle */
- sdio_disable_func(bus->sdiodev->func[SDIO_FUNC_2]);
+ sdio_disable_func(bus->sdiodev->func[2]);
bus->rxflow = false;
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
index cae21d14042d..bc9e9bcf40e2 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
@@ -24,9 +24,6 @@
/* Maximum number of I/O funcs */
#define NUM_SDIO_FUNCS 3
-#define SDIO_FUNC_1 1
-#define SDIO_FUNC_2 2
-
#define SDIOD_FBR_SIZE 0x100
/* io_en */
@@ -45,11 +42,13 @@
#define REG_F0_REG_MASK 0x7FF
#define REG_F1_MISC_MASK 0x1FFFF
-/* as of sdiod rev 0, supports 3 functions */
-#define SBSDIO_NUM_FUNCTION 3
-
/* function 0 vendor specific CCCR registers */
+/* Interrupt enable bits for func 1 and 2 */
+#define SDIO_CCCR_IEN_BIT0 (1 << 0)
+#define SDIO_CCCR_IEN_FUNC1 (1 << 1)
+#define SDIO_CCCR_IEN_FUNC2 (1 << 2)
+
#define SDIO_CCCR_BRCM_CARDCAP 0xf0
#define SDIO_CCCR_BRCM_CARDCAP_CMD14_SUPPORT 0x02
#define SDIO_CCCR_BRCM_CARDCAP_CMD14_EXT 0x04
@@ -349,7 +348,8 @@ int brcmf_sdiod_ramrw(struct brcmf_sdio_dev *sdiodev, bool write, u32 address,
u8 *data, uint size);
/* Issue an abort to the specified function */
-int brcmf_sdiod_abort(struct brcmf_sdio_dev *sdiodev, u8 fn);
+int brcmf_sdiod_abort(struct brcmf_sdio_dev *sdiodev, struct sdio_func *func);
+
void brcmf_sdiod_sgtable_alloc(struct brcmf_sdio_dev *sdiodev);
void brcmf_sdiod_change_state(struct brcmf_sdio_dev *sdiodev,
enum brcmf_sdiod_state state);
--
2.11.0
next prev parent reply other threads:[~2017-07-19 19:13 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-19 19:07 PATCH v3 brcmfmac driver cleanup Ian Molton
2017-07-19 19:07 ` [PATCH 01/34] brcmfmac: Fix parameter order in brcmf_sdiod_f0_writeb() Ian Molton
2017-07-19 19:07 ` [PATCH 02/34] brcmfmac: Register sizes on hardware are not dependent on compiler types Ian Molton
2017-07-19 19:07 ` [PATCH 03/34] brcmfmac: Split brcmf_sdiod_regrw_helper() up Ian Molton
2017-07-19 19:07 ` [PATCH 04/34] brcmfmac: Clean up brcmf_sdiod_set_sbaddr_window() Ian Molton
2017-07-19 19:07 ` [PATCH 05/34] brcmfmac: Remove dead IO code Ian Molton
2017-07-19 19:07 ` [PATCH 06/34] brcmfmac: Remove bandaid for SleepCSR Ian Molton
2017-07-19 19:07 ` [PATCH 07/34] brcmfmac: Remove brcmf_sdiod_request_data() Ian Molton
2017-07-19 19:07 ` [PATCH 08/34] brcmfmac: Fix uninitialised variable Ian Molton
2017-07-19 19:07 ` [PATCH 09/34] brcmfmac: Remove noisy debugging Ian Molton
2017-07-19 19:07 ` [PATCH 10/34] brcmfmac: Rename bcmerror to err Ian Molton
2017-07-19 19:07 ` [PATCH 11/34] brcmfmac: Split brcmf_sdiod_buffrw function up Ian Molton
2017-07-19 19:08 ` [PATCH 12/34] brcmfmac: Replace old IO functions with simpler ones Ian Molton
2017-07-19 19:08 ` [PATCH 13/34] brcmfmac: Tidy register definitions a little Ian Molton
2017-07-19 19:08 ` [PATCH 14/34] brcmfmac: Remove brcmf_sdiod_addrprep() Ian Molton
2017-07-19 19:08 ` [PATCH 15/34] brcmfamc: remove unnecessary call to brcmf_sdiod_set_backplane_window() Ian Molton
2017-07-19 19:08 ` [PATCH 16/34] brcmfmac: Cleanup offsetof() Ian Molton
2017-07-19 19:08 ` [PATCH 17/34] brcmfmac: Remove unused macro Ian Molton
2017-07-19 19:08 ` [PATCH 18/34] brcmfmac: Rename SOC_AI to SOC_AXI Ian Molton
2017-07-19 19:08 ` [PATCH 19/34] brcmfmac: Get rid of chip_priv and core_priv structs Ian Molton
2017-07-19 19:08 ` [PATCH 20/34] brcmfmac: Whitespace patch Ian Molton
2017-07-19 19:08 ` [PATCH 21/34] brcmfmac: Simplify chip probe routine Ian Molton
2017-07-19 19:08 ` [PATCH 22/34] brcmfmac: Rename axi functions for clarity Ian Molton
2017-07-19 19:08 ` [PATCH 23/34] brcmfmac: HUGE cleanup of IO access functions Ian Molton
2017-07-19 19:08 ` [PATCH 24/34] brcmfmac: Rename chip.ctx -> chip.bus_priv Ian Molton
2017-07-19 19:08 ` [PATCH 25/34] brcmfmac: Remove repeated calls to brcmf_chip_get_core() Ian Molton
2017-07-19 19:08 ` [PATCH 26/34] brcmfmac: General cleaning up. whitespace and comments fix Ian Molton
2017-07-19 19:08 ` [PATCH 27/34] brcmfmac: Remove {r,w}_sdreg32 Ian Molton
2017-07-19 19:08 ` [PATCH 28/34] brcmfmac: Rename buscore->core for consistency Ian Molton
2017-07-19 19:08 ` [PATCH 29/34] brcmfmac: stabilise the value of ->sbwad in use for some xfer routines Ian Molton
2017-07-19 19:08 ` [PATCH 30/34] brcmfmac: Correctly handle accesses to SDIO func0 Ian Molton
2017-07-19 19:08 ` [PATCH 31/34] brcmfmac: Remove func0 from function array Ian Molton
2017-07-19 19:08 ` Ian Molton [this message]
2017-07-19 19:08 ` [PATCH 33/34] brcmfmac: Remove array of functions Ian Molton
2017-07-19 19:08 ` [PATCH 34/34] brcmfmac: Reduce the noise from repeatedly dereferencing common pointers Ian Molton
2017-07-24 19:47 ` PATCH v3 brcmfmac driver cleanup Arend van Spriel
2017-07-26 10:23 ` Ian Molton
2017-07-26 20:25 Patch v4: Clean up brcmfmac driver Ian Molton
2017-07-26 20:25 ` [PATCH 32/34] brcmfmac: Replace function index with function pointer Ian Molton
2017-07-28 15:55 ` kbuild test robot
2017-08-08 12:29 ` Arend van Spriel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170719190822.10857-33-ian@mnementh.co.uk \
--to=ian@mnementh.co.uk \
--cc=arend.vanspriel@broadcom.com \
--cc=franky.lin@broadcom.com \
--cc=hante.meuleman@broadcom.com \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).