From: Christoph Hellwig <hch@lst.de>
To: "Rafał Miłecki" <zajec5@gmail.com>
Cc: "Kalle Valo" <kvalo@codeaurora.org>,
linux-wireless@vger.kernel.org,
"Hauke Mehrtens" <hauke@hauke-m.de>,
"Rafał Miłecki" <rafal@milecki.pl>,
linux-mips@linux-mips.org, "Christoph Hellwig" <hch@lst.de>,
"Linus Walleij" <linus.walleij@linaro.org>
Subject: Re: [PATCH wireless-drivers-next] bcma: get SoC device struct & copy its DMA params to the subdevices
Date: Mon, 21 Jan 2019 15:46:38 +0100 [thread overview]
Message-ID: <20190121144638.GA27203@lst.de> (raw)
In-Reply-To: <20190121101121.24555-1-zajec5@gmail.com>
On Mon, Jan 21, 2019 at 11:11:21AM +0100, Rafał Miłecki wrote:
> From: Rafał Miłecki <rafal@milecki.pl>
>
> For bus devices to be fully usable it's required to set their DMA
> parameters.
>
> For years it has been missing and remained unnoticed because of
> mips_dma_alloc_coherent() silently handling the empty coherent_dma_mask.
> Kernel 4.19 came with a lot of DMA changes and caused a regression on
> the bcm47xx. Starting with the commit f8c55dc6e828 ("MIPS: use generic
> dma noncoherent ops for simple noncoherent platforms") DMA coherent
> allocations just fail. Example:
> [ 1.114914] bgmac_bcma bcma0:2: Allocation of TX ring 0x200 failed
> [ 1.121215] bgmac_bcma bcma0:2: Unable to alloc memory for DMA
> [ 1.127626] bgmac_bcma: probe of bcma0:2 failed with error -12
> [ 1.133838] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded
>
> This change fixes above regression in addition to the MIPS bcm47xx
> commit 321c46b91550 ("MIPS: BCM47XX: Setup struct device for the SoC").
>
> It also fixes another *old* GPIO regression caused by a parent pointing
> to the NULL:
> [ 0.157054] missing gpiochip .dev parent pointer
> [ 0.157287] bcma: bus0: Error registering GPIO driver: -22
> introduced by the commit 74f4e0cc6108 ("bcma: switch GPIO portions to
> use GPIOLIB_IRQCHIP").
>
> Fixes: f8c55dc6e828 ("MIPS: use generic dma noncoherent ops for simple noncoherent platforms")
> Fixes: 74f4e0cc6108 ("bcma: switch GPIO portions to use GPIOLIB_IRQCHIP")
> Cc: linux-mips@linux-mips.org
> Cc: Christoph Hellwig <hch@lst.de>
> Cc: Linus Walleij <linus.walleij@linaro.org>
> Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
> ---
> While this patch is a regression fix, it depends on a change present in
> the wireless-drivers-next.git:
> bcma: keep a direct pointer to the struct device
>
> That's why I suggest pushing it into the wireless-drivers-next.git and I
> can take care of picking it for the stable@kernel.org later.
>
> Another option would be cherry-picking commit 5a1c18b761dd ("bcma: keep
> a direct pointer to the struct device") to the wireless-drivers.git but
> I don't think it's a common practice.
> ---
> drivers/bcma/host_soc.c | 2 ++
> drivers/bcma/main.c | 6 +++++-
> include/linux/bcma/bcma_soc.h | 1 +
> 3 files changed, 8 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/bcma/host_soc.c b/drivers/bcma/host_soc.c
> index c8073b509a2b..1fdfb704f22d 100644
> --- a/drivers/bcma/host_soc.c
> +++ b/drivers/bcma/host_soc.c
> @@ -191,6 +191,8 @@ int __init bcma_host_soc_init(struct bcma_soc *soc)
> struct bcma_bus *bus = &soc->bus;
> int err;
>
> + bus->dev = soc->dev;
> +
> /* Scan bus and initialize it */
> err = bcma_bus_early_register(bus);
> if (err)
> diff --git a/drivers/bcma/main.c b/drivers/bcma/main.c
> index 6535614a7dc1..433ca5e2ed2c 100644
> --- a/drivers/bcma/main.c
> +++ b/drivers/bcma/main.c
> @@ -236,12 +236,16 @@ EXPORT_SYMBOL(bcma_core_irq);
>
> void bcma_prepare_core(struct bcma_bus *bus, struct bcma_device *core)
> {
> + struct device *dev = &core->dev;
> +
> core->dev.release = bcma_release_core_dev;
> core->dev.bus = &bcma_bus_type;
> dev_set_name(&core->dev, "bcma%d:%d", bus->num, core->core_index);
> core->dev.parent = bus->dev;
> - if (bus->dev)
> + if (bus->dev) {
> bcma_of_fill_device(bus->dev, core);
> + dma_coerce_mask_and_coherent(dev, bus->dev->coherent_dma_mask);
> + }
I don't think this does the right thing for bcma devices behind
PCI/PCIe, as those might need a IOMMU which relies on having a device
it has properly enumerated to be passed into the DMA API. In other
words: I think you need to change the layering so that the DMA API
is always called on the underlying PCI/PCIe/platform device, not of
the child bus.
next prev parent reply other threads:[~2019-01-21 14:46 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-21 10:11 [PATCH wireless-drivers-next] bcma: get SoC device struct & copy its DMA params to the subdevices Rafał Miłecki
2019-01-21 14:46 ` Christoph Hellwig [this message]
2019-01-23 18:00 ` Rafał Miłecki
2021-12-23 4:11 ` Florian Fainelli
2021-12-23 6:19 ` Christoph Hellwig
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190121144638.GA27203@lst.de \
--to=hch@lst.de \
--cc=hauke@hauke-m.de \
--cc=kvalo@codeaurora.org \
--cc=linus.walleij@linaro.org \
--cc=linux-mips@linux-mips.org \
--cc=linux-wireless@vger.kernel.org \
--cc=rafal@milecki.pl \
--cc=zajec5@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).