[PATCH AUTOSEL 4.19 011/258] wil6210: fix reset flow for Talyn-mb

[PATCH AUTOSEL 4.19 011/258] wil6210: fix reset flow for Talyn-mb

[Sasha Levin]

From: Alexei Avshalom Lazar <ailizaro@codeaurora.org>

[ Upstream commit d083b2e2b7db5cca1791643d036e6597af27f49b ]

With current reset flow, Talyn sometimes get stuck causing PCIe
enumeration to fail. Fix this by removing some reset flow operations
that are not relevant for Talyn.
Setting bit 15 in RGF_HP_CTRL is WBE specific and is not in use for
all wil6210 devices.
For Sparrow, BIT_HPAL_PERST_FROM_PAD and BIT_CAR_PERST_RST were set
as a WA an HW issue.

Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org>
Signed-off-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/wil6210/main.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c
index 7debed6bec06..a0fe8cbad104 100644
--- a/drivers/net/wireless/ath/wil6210/main.c
+++ b/drivers/net/wireless/ath/wil6210/main.c
@@ -995,10 +995,13 @@ static int wil_target_reset(struct wil6210_priv *wil, int no_flash)
 
 	wil_dbg_misc(wil, "Resetting \"%s\"...\n", wil->hw_name);
 
-	/* Clear MAC link up */
-	wil_s(wil, RGF_HP_CTRL, BIT(15));
-	wil_s(wil, RGF_USER_CLKS_CTL_SW_RST_MASK_0, BIT_HPAL_PERST_FROM_PAD);
-	wil_s(wil, RGF_USER_CLKS_CTL_SW_RST_MASK_0, BIT_CAR_PERST_RST);
+	if (wil->hw_version < HW_VER_TALYN) {
+		/* Clear MAC link up */
+		wil_s(wil, RGF_HP_CTRL, BIT(15));
+		wil_s(wil, RGF_USER_CLKS_CTL_SW_RST_MASK_0,
+		      BIT_HPAL_PERST_FROM_PAD);
+		wil_s(wil, RGF_USER_CLKS_CTL_SW_RST_MASK_0, BIT_CAR_PERST_RST);
+	}
 
 	wil_halt_cpu(wil);
 
-- 
2.19.1

[PATCH AUTOSEL 4.19 012/258] wil6210: fix memory leak in wil_find_tx_bcast_2

[Sasha Levin]

From: Lior David <liord@codeaurora.org>

[ Upstream commit 664497400c89a4d40aee51bcf48bbd2e4dc71104 ]

A successful call to wil_tx_ring takes skb reference so
it will only be freed in wil_tx_complete. Consume the skb
in wil_find_tx_bcast_2 to prevent memory leak.

Signed-off-by: Lior David <liord@codeaurora.org>
Signed-off-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/wil6210/txrx.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/wireless/ath/wil6210/txrx.c b/drivers/net/wireless/ath/wil6210/txrx.c
index 6a7943e487fb..75c8aa297107 100644
--- a/drivers/net/wireless/ath/wil6210/txrx.c
+++ b/drivers/net/wireless/ath/wil6210/txrx.c
@@ -1313,6 +1313,8 @@ static struct wil_ring *wil_find_tx_bcast_2(struct wil6210_priv *wil,
 			wil_dbg_txrx(wil, "BCAST DUP -> ring %d\n", i);
 			wil_set_da_for_vring(wil, skb2, i);
 			wil_tx_ring(wil, vif, v2, skb2);
+			/* successful call to wil_tx_ring takes skb2 ref */
+			dev_kfree_skb_any(skb2);
 		} else {
 			wil_err(wil, "skb_copy failed\n");
 		}
-- 
2.19.1

[PATCH AUTOSEL 4.19 013/258] ath10k: assign 'n_cipher_suites' for WCN3990

[Sasha Levin]

From: Brian Norris <briannorris@chromium.org>

[ Upstream commit 2bd345cd2bfc0bd44528896313c0b45f087bdf67 ]

Commit 2ea9f12cefe4 ("ath10k: add new cipher suite support") added a new
n_cipher_suites HW param with a fallback value and a warning log. Commit
03a72288c546 ("ath10k: wmi: add hw params entry for wcn3990") later
added WCN3990 HW entries, but it missed the n_cipher_suites.

Rather than seeing this warning every boot

  ath10k_snoc 18800000.wifi: invalid hw_params.n_cipher_suites 0

let's provide the appropriate value.

Cc: Rakesh Pillai <pillair@qti.qualcomm.com>
Cc: Govind Singh <govinds@qti.qualcomm.com>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath10k/core.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index c40cd129afe7..5210cffb5344 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -532,6 +532,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.hw_ops = &wcn3990_ops,
 		.decap_align_bytes = 1,
 		.num_peers = TARGET_HL_10_TLV_NUM_PEERS,
+		.n_cipher_suites = 8,
 		.ast_skid_limit = TARGET_HL_10_TLV_AST_SKID_LIMIT,
 		.num_wds_entries = TARGET_HL_10_TLV_NUM_WDS_ENTRIES,
 		.target_64bit = true,
-- 
2.19.1

[PATCH AUTOSEL 4.19 014/258] ath9k: dynack: use authentication messages for 'late' ack

[Sasha Levin]

From: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>

[ Upstream commit 3831a2a0010c72e3956020cbf1057a1701a2e469 ]

In order to properly support dynack in ad-hoc mode running
wpa_supplicant, take into account authentication frames for
'late ack' detection. This patch has been tested on devices
mounted on offshore high-voltage stations connected through
~24Km link

Reported-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath9k/dynack.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath9k/dynack.c b/drivers/net/wireless/ath/ath9k/dynack.c
index 7334c9b09e82..cc0dc966c512 100644
--- a/drivers/net/wireless/ath/ath9k/dynack.c
+++ b/drivers/net/wireless/ath/ath9k/dynack.c
@@ -187,7 +187,8 @@ void ath_dynack_sample_tx_ts(struct ath_hw *ah, struct sk_buff *skb,
 	/* late ACK */
 	if (ts->ts_status & ATH9K_TXERR_XRETRY) {
 		if (ieee80211_is_assoc_req(hdr->frame_control) ||
-		    ieee80211_is_assoc_resp(hdr->frame_control)) {
+		    ieee80211_is_assoc_resp(hdr->frame_control) ||
+		    ieee80211_is_auth(hdr->frame_control)) {
 			ath_dbg(common, DYNACK, "late ack\n");
 			ath9k_hw_setslottime(ah, (LATEACK_TO - 3) / 2);
 			ath9k_hw_set_ack_timeout(ah, LATEACK_TO);
-- 
2.19.1

[PATCH AUTOSEL 4.19 035/258] iwlwifi: fw: do not set sgi bits for HE connection

[Sasha Levin]

From: Naftali Goldstein <naftali.goldstein@intel.com>

[ Upstream commit 5c2dbebb446539eb9640bf59a02756d6e7f1fc53 ]

If the association supports HE, HT/VHT rates will never be used for Tx
and therefore there's no need to set the sgi-per-channel-width-support
bits, so don't set them in this case.

Fixes: 110b32f065f3 ("iwlwifi: mvm: rs: add basic implementation of the new RS API handlers")
Signed-off-by: Naftali Goldstein <naftali.goldstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/mvm/rs-fw.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/rs-fw.c b/drivers/net/wireless/intel/iwlwifi/mvm/rs-fw.c
index 8169d1450b3b..d1c1a8069c7e 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/rs-fw.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/rs-fw.c
@@ -98,8 +98,12 @@ static u8 rs_fw_sgi_cw_support(struct ieee80211_sta *sta)
 {
 	struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap;
 	struct ieee80211_sta_vht_cap *vht_cap = &sta->vht_cap;
+	struct ieee80211_sta_he_cap *he_cap = &sta->he_cap;
 	u8 supp = 0;
 
+	if (he_cap && he_cap->has_he)
+		return 0;
+
 	if (ht_cap->cap & IEEE80211_HT_CAP_SGI_20)
 		supp |= BIT(IWL_TLC_MNG_CH_WIDTH_20MHZ);
 	if (ht_cap->cap & IEEE80211_HT_CAP_SGI_40)
-- 
2.19.1

[PATCH AUTOSEL 4.19 090/258] mt76x0: dfs: fix IBI_R11 configuration on non-radar channels

[Sasha Levin]

From: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>

[ Upstream commit 6bf4a8e902aad7df55d7f2b10b850cfa3f880996 ]

Fix IBI_R11 configuration on non-radar channels for mt76x0e
driver. This patch improve system stability under heavy load.
Moreover use IBI_R11 name and remove magic numbers for
0x212c register

Fixes: 0c3b3abc9251 ("mt76x0: pci: add DFS support")
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt76/mt76x2_dfs.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt76x2_dfs.c b/drivers/net/wireless/mediatek/mt76/mt76x2_dfs.c
index 374cc655c11d..16e6b6970e28 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x2_dfs.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x2_dfs.c
@@ -799,7 +799,7 @@ static void mt76x2_dfs_set_bbp_params(struct mt76x2_dev *dev)
 
 	/* enable detection*/
 	mt76_wr(dev, MT_BBP(DFS, 0), MT_DFS_CH_EN << 16);
-	mt76_wr(dev, 0x212c, 0x0c350001);
+	mt76_wr(dev, MT_BBP(IBI, 11), 0x0c350001);
 }
 
 void mt76x2_dfs_adjust_agc(struct mt76x2_dev *dev)
@@ -842,7 +842,11 @@ void mt76x2_dfs_init_params(struct mt76x2_dev *dev)
 		mt76_wr(dev, MT_BBP(DFS, 0), 0);
 		/* clear detector status */
 		mt76_wr(dev, MT_BBP(DFS, 1), 0xf);
-		mt76_wr(dev, 0x212c, 0);
+		if (mt76_chip(&dev->mt76) == 0x7610 ||
+		    mt76_chip(&dev->mt76) == 0x7630)
+			mt76_wr(dev, MT_BBP(IBI, 11), 0xfde8081);
+		else
+			mt76_wr(dev, MT_BBP(IBI, 11), 0);
 
 		mt76x2_irq_disable(dev, MT_INT_GPTIMER);
 		mt76_rmw_field(dev, MT_INT_TIMER_EN,
-- 
2.19.1

[PATCH AUTOSEL 4.19 187/258] mac80211: fix radiotap vendor presence bitmap handling

[Sasha Levin]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit efc38dd7d5fa5c8cdd0c917c5d00947aa0539443 ]

Due to the alignment handling, it actually matters where in the code
we add the 4 bytes for the presence bitmap to the length; the first
field is the timestamp with 8 byte alignment so we need to add the
space for the extra vendor namespace presence bitmap *before* we do
any alignment for the fields.

Move the presence bitmap length accounting to the right place to fix
the alignment for the data properly.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/rx.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 5e2b4a41acf1..51ad330bf8e8 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -142,6 +142,9 @@ ieee80211_rx_radiotap_hdrlen(struct ieee80211_local *local,
 	/* allocate extra bitmaps */
 	if (status->chains)
 		len += 4 * hweight8(status->chains);
+	/* vendor presence bitmap */
+	if (status->flag & RX_FLAG_RADIOTAP_VENDOR_DATA)
+		len += 4;
 
 	if (ieee80211_have_rx_timestamp(status)) {
 		len = ALIGN(len, 8);
@@ -197,8 +200,6 @@ ieee80211_rx_radiotap_hdrlen(struct ieee80211_local *local,
 	if (status->flag & RX_FLAG_RADIOTAP_VENDOR_DATA) {
 		struct ieee80211_vendor_radiotap *rtap = (void *)skb->data;
 
-		/* vendor presence bitmap */
-		len += 4;
 		/* alignment for fixed 6-byte vendor data header */
 		len = ALIGN(len, 2);
 		/* vendor data header */
-- 
2.19.1

[PATCH AUTOSEL 4.19 193/258] cw1200: Fix concurrency use-after-free bugs in cw1200_hw_scan()

[Sasha Levin]

From: Jia-Ju Bai <baijiaju1990@gmail.com>

[ Upstream commit 4f68ef64cd7feb1220232bd8f501d8aad340a099 ]

The function cw1200_bss_info_changed() and cw1200_hw_scan() can be
concurrently executed.
The two functions both access a possible shared variable "frame.skb".

This shared variable is freed by dev_kfree_skb() in cw1200_upload_beacon(),
which is called by cw1200_bss_info_changed(). The free operation is
protected by a mutex lock "priv->conf_mutex" in cw1200_bss_info_changed().

In cw1200_hw_scan(), this shared variable is accessed without the
protection of the mutex lock "priv->conf_mutex".
Thus, concurrency use-after-free bugs may occur.

To fix these bugs, the original calls to mutex_lock(&priv->conf_mutex) and
mutex_unlock(&priv->conf_mutex) are moved to the places, which can
protect the accesses to the shared variable.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/st/cw1200/scan.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

diff --git a/drivers/net/wireless/st/cw1200/scan.c b/drivers/net/wireless/st/cw1200/scan.c
index 67213f11acbd..0a9eac93dd01 100644
--- a/drivers/net/wireless/st/cw1200/scan.c
+++ b/drivers/net/wireless/st/cw1200/scan.c
@@ -78,6 +78,10 @@ int cw1200_hw_scan(struct ieee80211_hw *hw,
 	if (req->n_ssids > WSM_SCAN_MAX_NUM_OF_SSIDS)
 		return -EINVAL;
 
+	/* will be unlocked in cw1200_scan_work() */
+	down(&priv->scan.lock);
+	mutex_lock(&priv->conf_mutex);
+
 	frame.skb = ieee80211_probereq_get(hw, priv->vif->addr, NULL, 0,
 		req->ie_len);
 	if (!frame.skb)
@@ -86,19 +90,15 @@ int cw1200_hw_scan(struct ieee80211_hw *hw,
 	if (req->ie_len)
 		skb_put_data(frame.skb, req->ie, req->ie_len);
 
-	/* will be unlocked in cw1200_scan_work() */
-	down(&priv->scan.lock);
-	mutex_lock(&priv->conf_mutex);
-
 	ret = wsm_set_template_frame(priv, &frame);
 	if (!ret) {
 		/* Host want to be the probe responder. */
 		ret = wsm_set_probe_responder(priv, true);
 	}
 	if (ret) {
+		dev_kfree_skb(frame.skb);
 		mutex_unlock(&priv->conf_mutex);
 		up(&priv->scan.lock);
-		dev_kfree_skb(frame.skb);
 		return ret;
 	}
 
@@ -120,10 +120,9 @@ int cw1200_hw_scan(struct ieee80211_hw *hw,
 		++priv->scan.n_ssids;
 	}
 
-	mutex_unlock(&priv->conf_mutex);
-
 	if (frame.skb)
 		dev_kfree_skb(frame.skb);
+	mutex_unlock(&priv->conf_mutex);
 	queue_work(priv->workqueue, &priv->scan.work);
 	return 0;
 }
-- 
2.19.1

[PATCH AUTOSEL 4.19 196/258] iwlwifi: mvm: fix setting HE ppe FW config

[Sasha Levin]

From: Naftali Goldstein <naftali.goldstein@intel.com>

[ Upstream commit 189b8d441b0f7825f0b4278851c52afaa0515ed2 ]

The FW expects to get the ppe value for each NSS-BW pair in the same
format as in the he phy capabilities IE, which means that a value of 0
implies ppe should be used for BPSK (mcs 0). If there are no PPE
thresholds in the IE, or if for some NSS-RU pair there's no threshold
set for it (this could happen because it's a variable-sized field), it
means no PPE should not be used for that pair, so the value sent to FW
should be 7 which corresponds to "none".

Fixes: 514c30696fbc ("iwlwifi: add support for IEEE802.11ax")
Signed-off-by: Naftali Goldstein <naftali.goldstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/fw/api/mac.h   | 2 +-
 drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c | 8 +++++++-
 2 files changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/fw/api/mac.h b/drivers/net/wireless/intel/iwlwifi/fw/api/mac.h
index 55594c93b014..47dbd2d3e3b4 100644
--- a/drivers/net/wireless/intel/iwlwifi/fw/api/mac.h
+++ b/drivers/net/wireless/intel/iwlwifi/fw/api/mac.h
@@ -442,7 +442,7 @@ struct iwl_he_backoff_conf {
  * Support for Nss x BW (or RU) matrix:
  *	(0=SISO, 1=MIMO2) x (0-20MHz, 1-40MHz, 2-80MHz, 3-160MHz)
  * Each entry contains 2 QAM thresholds for 8us and 16us:
- *	0=BPSK, 1=QPSK, 2=16QAM, 3=64QAM, 4=256QAM, 5=1024QAM, 6/7=RES
+ *	0=BPSK, 1=QPSK, 2=16QAM, 3=64QAM, 4=256QAM, 5=1024QAM, 6=RES, 7=NONE
  * i.e. QAM_th1 < QAM_th2 such if TX uses QAM_tx:
  *	QAM_tx < QAM_th1            --> PPE=0us
  *	QAM_th1 <= QAM_tx < QAM_th2 --> PPE=8us
diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
index 9a764af30f36..0f357e8c4f94 100644
--- a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c
@@ -1997,7 +1997,13 @@ static void iwl_mvm_cfg_he_sta(struct iwl_mvm *mvm,
 	if (sta->he_cap.he_cap_elem.mac_cap_info[4] & IEEE80211_HE_MAC_CAP4_BQR)
 		sta_ctxt_cmd.htc_flags |= cpu_to_le32(IWL_HE_HTC_BQR_SUPP);
 
-	/* If PPE Thresholds exist, parse them into a FW-familiar format */
+	/*
+	 * Initialize the PPE thresholds to "None" (7), as described in Table
+	 * 9-262ac of 80211.ax/D3.0.
+	 */
+	memset(&sta_ctxt_cmd.pkt_ext, 7, sizeof(sta_ctxt_cmd.pkt_ext));
+
+	/* If PPE Thresholds exist, parse them into a FW-familiar format. */
 	if (sta->he_cap.he_cap_elem.phy_cap_info[6] &
 	    IEEE80211_HE_PHY_CAP6_PPE_THRESHOLD_PRESENT) {
 		u8 nss = (sta->he_cap.ppe_thres[0] &
-- 
2.19.1