* [PATCH v4 0/3] mac80211/ath11k: HE mesh support
@ 2019-07-03 10:18 Sven Eckelmann
2019-07-03 10:18 ` [PATCH v4 1/3] mac80211: implement HE support for mesh Sven Eckelmann
` (2 more replies)
0 siblings, 3 replies; 4+ messages in thread
From: Sven Eckelmann @ 2019-07-03 10:18 UTC (permalink / raw)
To: linux-wireless; +Cc: ath11k, Sven Eckelmann
Hi,
Some features of 802.11ax without central organizing (AP) STA can also be
used in mesh mode. The main goal is to get HE mesh working with ath11k.
For persons without ath11k compatible hw, hwsim can be used in the as basis
for further development of these features.
* v4
- switch order of the mac80211 HE mesh support and mac80211_hwsim support
- drop ie_len variable from ieee80211_ie_len_he_cap and
ieee80211_ie_build_he_oper
- switch to function ieee80211_get_he_iftype_cap instead of implementing new
function ieee80211_get_he_mesh_cap
- allow ieee80211_ie_len_he_cap to calculate length for non-mesh HE cap
- dropped he_support workaround in ath11k because now all phy_modes are
HE phy modes
* v3
- force ath11k PHY mode for meshpoint vif to HE mode to avoid hang of
firmware when HE (or VHT on 2.4GHz) device tries to connect
* v2:
- add of ath11k patch
* v1:
- initial RFC
Sven Eckelmann (3):
mac80211: implement HE support for mesh
mac80211_hwsim: Register support for HE meshpoint
ath11k: register HE mesh capabilities
drivers/net/wireless/ath/ath11k/mac.c | 56 +++++
drivers/net/wireless/mac80211_hwsim.c | 283 +++++++++++++++++---------
net/mac80211/ieee80211_i.h | 2 +
net/mac80211/mesh.c | 62 ++++++
net/mac80211/mesh.h | 4 +
net/mac80211/mesh_plink.c | 12 +-
net/mac80211/util.c | 49 +++++
7 files changed, 373 insertions(+), 95 deletions(-)
--
2.20.1
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH v4 1/3] mac80211: implement HE support for mesh
2019-07-03 10:18 [PATCH v4 0/3] mac80211/ath11k: HE mesh support Sven Eckelmann
@ 2019-07-03 10:18 ` Sven Eckelmann
2019-07-03 10:18 ` [PATCH v4 2/3] mac80211_hwsim: Register support for HE meshpoint Sven Eckelmann
2019-07-03 10:18 ` [PATCH v4 3/3] ath11k: register HE mesh capabilities Sven Eckelmann
2 siblings, 0 replies; 4+ messages in thread
From: Sven Eckelmann @ 2019-07-03 10:18 UTC (permalink / raw)
To: linux-wireless; +Cc: ath11k, Sven Eckelmann
From: Sven Eckelmann <seckelmann@datto.com>
Implement the basics required for supporting high efficiency with mesh:
include HE information elements in beacons, probe responses, and peering
action frames, and check for compatible HE configurations when peering.
Signed-off-by: Sven Eckelmann <seckelmann@datto.com>
---
net/mac80211/ieee80211_i.h | 2 ++
net/mac80211/mesh.c | 62 ++++++++++++++++++++++++++++++++++++++
net/mac80211/mesh.h | 4 +++
net/mac80211/mesh_plink.c | 12 +++++++-
net/mac80211/util.c | 49 ++++++++++++++++++++++++++++++
5 files changed, 128 insertions(+), 1 deletion(-)
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 004e2e3adb88..6e924ba9eeb1 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -2133,9 +2133,11 @@ u8 *ieee80211_ie_build_vht_cap(u8 *pos, struct ieee80211_sta_vht_cap *vht_cap,
u32 cap);
u8 *ieee80211_ie_build_vht_oper(u8 *pos, struct ieee80211_sta_vht_cap *vht_cap,
const struct cfg80211_chan_def *chandef);
+u8 ieee80211_ie_len_he_cap(struct ieee80211_sub_if_data *sdata, u8 iftype);
u8 *ieee80211_ie_build_he_cap(u8 *pos,
const struct ieee80211_sta_he_cap *he_cap,
u8 *end);
+u8 *ieee80211_ie_build_he_oper(u8 *pos);
int ieee80211_parse_bitrates(struct cfg80211_chan_def *chandef,
const struct ieee80211_supported_band *sband,
const u8 *srates, int srates_len, u32 *rates);
diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c
index 2e7fa743c892..d09b3c789314 100644
--- a/net/mac80211/mesh.c
+++ b/net/mac80211/mesh.c
@@ -532,6 +532,61 @@ int mesh_add_vht_oper_ie(struct ieee80211_sub_if_data *sdata,
return 0;
}
+int mesh_add_he_cap_ie(struct ieee80211_sub_if_data *sdata,
+ struct sk_buff *skb, u8 ie_len)
+{
+ const struct ieee80211_sta_he_cap *he_cap;
+ struct ieee80211_supported_band *sband;
+ u8 *pos;
+
+ sband = ieee80211_get_sband(sdata);
+ if (!sband)
+ return -EINVAL;
+
+ he_cap = ieee80211_get_he_iftype_cap(sband, NL80211_IFTYPE_MESH_POINT);
+
+ if (!he_cap ||
+ sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_20_NOHT ||
+ sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_5 ||
+ sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_10)
+ return 0;
+
+ if (skb_tailroom(skb) < ie_len)
+ return -ENOMEM;
+
+ pos = skb_put(skb, ie_len);
+ ieee80211_ie_build_he_cap(pos, he_cap, pos + ie_len);
+
+ return 0;
+}
+
+int mesh_add_he_oper_ie(struct ieee80211_sub_if_data *sdata,
+ struct sk_buff *skb)
+{
+ const struct ieee80211_sta_he_cap *he_cap;
+ struct ieee80211_supported_band *sband;
+ u8 *pos;
+
+ sband = ieee80211_get_sband(sdata);
+ if (!sband)
+ return -EINVAL;
+
+ he_cap = ieee80211_get_he_iftype_cap(sband, NL80211_IFTYPE_MESH_POINT);
+ if (!he_cap ||
+ sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_20_NOHT ||
+ sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_5 ||
+ sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_10)
+ return 0;
+
+ if (skb_tailroom(skb) < 2 + 1 + sizeof(struct ieee80211_he_operation))
+ return -ENOMEM;
+
+ pos = skb_put(skb, 2 + 1 + sizeof(struct ieee80211_he_operation));
+ ieee80211_ie_build_he_oper(pos);
+
+ return 0;
+}
+
static void ieee80211_mesh_path_timer(struct timer_list *t)
{
struct ieee80211_sub_if_data *sdata =
@@ -677,6 +732,7 @@ ieee80211_mesh_build_beacon(struct ieee80211_if_mesh *ifmsh)
struct ieee80211_chanctx_conf *chanctx_conf;
struct mesh_csa_settings *csa;
enum nl80211_band band;
+ u8 ie_len_he_cap;
u8 *pos;
struct ieee80211_sub_if_data *sdata;
int hdr_len = offsetofend(struct ieee80211_mgmt, u.beacon);
@@ -687,6 +743,8 @@ ieee80211_mesh_build_beacon(struct ieee80211_if_mesh *ifmsh)
band = chanctx_conf->def.chan->band;
rcu_read_unlock();
+ ie_len_he_cap = ieee80211_ie_len_he_cap(sdata,
+ NL80211_IFTYPE_MESH_POINT);
head_len = hdr_len +
2 + /* NULL SSID */
/* Channel Switch Announcement */
@@ -706,6 +764,8 @@ ieee80211_mesh_build_beacon(struct ieee80211_if_mesh *ifmsh)
2 + sizeof(__le16) + /* awake window */
2 + sizeof(struct ieee80211_vht_cap) +
2 + sizeof(struct ieee80211_vht_operation) +
+ ie_len_he_cap +
+ 2 + 1 + sizeof(struct ieee80211_he_operation) +
ifmsh->ie_len;
bcn = kzalloc(sizeof(*bcn) + head_len + tail_len, GFP_KERNEL);
@@ -823,6 +883,8 @@ ieee80211_mesh_build_beacon(struct ieee80211_if_mesh *ifmsh)
mesh_add_awake_window_ie(sdata, skb) ||
mesh_add_vht_cap_ie(sdata, skb) ||
mesh_add_vht_oper_ie(sdata, skb) ||
+ mesh_add_he_cap_ie(sdata, skb, ie_len_he_cap) ||
+ mesh_add_he_oper_ie(sdata, skb) ||
mesh_add_vendor_ies(sdata, skb))
goto out_free;
diff --git a/net/mac80211/mesh.h b/net/mac80211/mesh.h
index 94d57cce70da..953f720754e8 100644
--- a/net/mac80211/mesh.h
+++ b/net/mac80211/mesh.h
@@ -218,6 +218,10 @@ int mesh_add_vht_cap_ie(struct ieee80211_sub_if_data *sdata,
struct sk_buff *skb);
int mesh_add_vht_oper_ie(struct ieee80211_sub_if_data *sdata,
struct sk_buff *skb);
+int mesh_add_he_cap_ie(struct ieee80211_sub_if_data *sdata,
+ struct sk_buff *skb, u8 ie_len);
+int mesh_add_he_oper_ie(struct ieee80211_sub_if_data *sdata,
+ struct sk_buff *skb);
void mesh_rmc_free(struct ieee80211_sub_if_data *sdata);
int mesh_rmc_init(struct ieee80211_sub_if_data *sdata);
void ieee80211s_init(void);
diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c
index dd3aefd052a9..737c5f4dbf52 100644
--- a/net/mac80211/mesh_plink.c
+++ b/net/mac80211/mesh_plink.c
@@ -218,9 +218,12 @@ static int mesh_plink_frame_tx(struct ieee80211_sub_if_data *sdata,
bool include_plid = false;
u16 peering_proto = 0;
u8 *pos, ie_len = 4;
+ u8 ie_len_he_cap;
int hdr_len = offsetofend(struct ieee80211_mgmt, u.action.u.self_prot);
int err = -ENOMEM;
+ ie_len_he_cap = ieee80211_ie_len_he_cap(sdata,
+ NL80211_IFTYPE_MESH_POINT);
skb = dev_alloc_skb(local->tx_headroom +
hdr_len +
2 + /* capability info */
@@ -233,6 +236,8 @@ static int mesh_plink_frame_tx(struct ieee80211_sub_if_data *sdata,
2 + sizeof(struct ieee80211_ht_operation) +
2 + sizeof(struct ieee80211_vht_cap) +
2 + sizeof(struct ieee80211_vht_operation) +
+ ie_len_he_cap +
+ 2 + 1 + sizeof(struct ieee80211_he_operation) +
2 + 8 + /* peering IE */
sdata->u.mesh.ie_len);
if (!skb)
@@ -321,7 +326,9 @@ static int mesh_plink_frame_tx(struct ieee80211_sub_if_data *sdata,
if (mesh_add_ht_cap_ie(sdata, skb) ||
mesh_add_ht_oper_ie(sdata, skb) ||
mesh_add_vht_cap_ie(sdata, skb) ||
- mesh_add_vht_oper_ie(sdata, skb))
+ mesh_add_vht_oper_ie(sdata, skb) ||
+ mesh_add_he_cap_ie(sdata, skb, ie_len_he_cap) ||
+ mesh_add_he_oper_ie(sdata, skb))
goto free;
}
@@ -433,6 +440,9 @@ static void mesh_sta_info_init(struct ieee80211_sub_if_data *sdata,
ieee80211_vht_cap_ie_to_sta_vht_cap(sdata, sband,
elems->vht_cap_elem, sta);
+ ieee80211_he_cap_ie_to_sta_he_cap(sdata, sband, elems->he_cap,
+ elems->he_cap_len, sta);
+
if (bw != sta->sta.bandwidth)
changed |= IEEE80211_RC_BW_CHANGED;
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index 1b224fa27367..52f5082bb165 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -2702,6 +2702,27 @@ u8 *ieee80211_ie_build_vht_cap(u8 *pos, struct ieee80211_sta_vht_cap *vht_cap,
return pos;
}
+u8 ieee80211_ie_len_he_cap(struct ieee80211_sub_if_data *sdata, u8 iftype)
+{
+ const struct ieee80211_sta_he_cap *he_cap;
+ struct ieee80211_supported_band *sband;
+ u8 n;
+
+ sband = ieee80211_get_sband(sdata);
+ if (!sband)
+ return 0;
+
+ he_cap = ieee80211_get_he_iftype_cap(sband, iftype);
+ if (!he_cap)
+ return 0;
+
+ n = ieee80211_he_mcs_nss_size(&he_cap->he_cap_elem);
+ return 2 + 1 +
+ sizeof(he_cap->he_cap_elem) + n +
+ ieee80211_he_ppe_size(he_cap->ppe_thres[0],
+ he_cap->he_cap_elem.phy_cap_info);
+}
+
u8 *ieee80211_ie_build_he_cap(u8 *pos,
const struct ieee80211_sta_he_cap *he_cap,
u8 *end)
@@ -2891,6 +2912,34 @@ u8 *ieee80211_ie_build_vht_oper(u8 *pos, struct ieee80211_sta_vht_cap *vht_cap,
return pos + sizeof(struct ieee80211_vht_operation);
}
+u8 *ieee80211_ie_build_he_oper(u8 *pos)
+{
+ struct ieee80211_he_operation *he_oper;
+ u32 he_oper_params;
+
+ *pos++ = WLAN_EID_EXTENSION;
+ *pos++ = 1 + sizeof(struct ieee80211_he_operation);
+ *pos++ = WLAN_EID_EXT_HE_OPERATION;
+
+ he_oper_params = 0;
+ he_oper_params |= u32_encode_bits(1023, /* disabled */
+ IEEE80211_HE_OPERATION_RTS_THRESHOLD_MASK);
+ he_oper_params |= u32_encode_bits(1,
+ IEEE80211_HE_OPERATION_ER_SU_DISABLE);
+ he_oper_params |= u32_encode_bits(1,
+ IEEE80211_HE_OPERATION_BSS_COLOR_DISABLED);
+
+ he_oper = (struct ieee80211_he_operation *)pos;
+ he_oper->he_oper_params = cpu_to_le32(he_oper_params);
+
+ /* don't require special HE peer rates */
+ he_oper->he_mcs_nss_set = cpu_to_le16(0xffff);
+
+ /* TODO add VHT operational and 6GHz operational subelement? */
+
+ return pos + sizeof(struct ieee80211_vht_operation);
+}
+
bool ieee80211_chandef_ht_oper(const struct ieee80211_ht_operation *ht_oper,
struct cfg80211_chan_def *chandef)
{
--
2.20.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH v4 2/3] mac80211_hwsim: Register support for HE meshpoint
2019-07-03 10:18 [PATCH v4 0/3] mac80211/ath11k: HE mesh support Sven Eckelmann
2019-07-03 10:18 ` [PATCH v4 1/3] mac80211: implement HE support for mesh Sven Eckelmann
@ 2019-07-03 10:18 ` Sven Eckelmann
2019-07-03 10:18 ` [PATCH v4 3/3] ath11k: register HE mesh capabilities Sven Eckelmann
2 siblings, 0 replies; 4+ messages in thread
From: Sven Eckelmann @ 2019-07-03 10:18 UTC (permalink / raw)
To: linux-wireless; +Cc: ath11k, Sven Eckelmann
From: Sven Eckelmann <seckelmann@datto.com>
Some features of 802.11ax without central organizing (AP) STA can also be
used in mesh mode. hwsim can be used to assist initial development of these
features without having access to HW.
Signed-off-by: Sven Eckelmann <seckelmann@datto.com>
---
drivers/net/wireless/mac80211_hwsim.c | 283 +++++++++++++++++---------
1 file changed, 189 insertions(+), 94 deletions(-)
diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index 519b4ee88c5c..a3913b75d715 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -2496,116 +2496,211 @@ static void hwsim_mcast_new_radio(int id, struct genl_info *info,
nlmsg_free(mcast_skb);
}
-static const struct ieee80211_sband_iftype_data he_capa_2ghz = {
- /* TODO: should we support other types, e.g., P2P?*/
- .types_mask = BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_AP),
- .he_cap = {
- .has_he = true,
- .he_cap_elem = {
- .mac_cap_info[0] =
- IEEE80211_HE_MAC_CAP0_HTC_HE,
- .mac_cap_info[1] =
- IEEE80211_HE_MAC_CAP1_TF_MAC_PAD_DUR_16US |
- IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_RX_QOS_8,
- .mac_cap_info[2] =
- IEEE80211_HE_MAC_CAP2_BSR |
- IEEE80211_HE_MAC_CAP2_MU_CASCADING |
- IEEE80211_HE_MAC_CAP2_ACK_EN,
- .mac_cap_info[3] =
- IEEE80211_HE_MAC_CAP3_OMI_CONTROL |
- IEEE80211_HE_MAC_CAP3_MAX_AMPDU_LEN_EXP_VHT_2,
- .mac_cap_info[4] = IEEE80211_HE_MAC_CAP4_AMDSU_IN_AMPDU,
- .phy_cap_info[1] =
- IEEE80211_HE_PHY_CAP1_PREAMBLE_PUNC_RX_MASK |
- IEEE80211_HE_PHY_CAP1_DEVICE_CLASS_A |
- IEEE80211_HE_PHY_CAP1_LDPC_CODING_IN_PAYLOAD |
- IEEE80211_HE_PHY_CAP1_MIDAMBLE_RX_TX_MAX_NSTS,
- .phy_cap_info[2] =
- IEEE80211_HE_PHY_CAP2_NDP_4x_LTF_AND_3_2US |
- IEEE80211_HE_PHY_CAP2_STBC_TX_UNDER_80MHZ |
- IEEE80211_HE_PHY_CAP2_STBC_RX_UNDER_80MHZ |
- IEEE80211_HE_PHY_CAP2_UL_MU_FULL_MU_MIMO |
- IEEE80211_HE_PHY_CAP2_UL_MU_PARTIAL_MU_MIMO,
-
- /* Leave all the other PHY capability bytes unset, as
- * DCM, beam forming, RU and PPE threshold information
- * are not supported
- */
+static const struct ieee80211_sband_iftype_data he_capa_2ghz[] = {
+ {
+ /* TODO: should we support other types, e.g., P2P?*/
+ .types_mask = BIT(NL80211_IFTYPE_STATION) |
+ BIT(NL80211_IFTYPE_AP),
+ .he_cap = {
+ .has_he = true,
+ .he_cap_elem = {
+ .mac_cap_info[0] =
+ IEEE80211_HE_MAC_CAP0_HTC_HE,
+ .mac_cap_info[1] =
+ IEEE80211_HE_MAC_CAP1_TF_MAC_PAD_DUR_16US |
+ IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_RX_QOS_8,
+ .mac_cap_info[2] =
+ IEEE80211_HE_MAC_CAP2_BSR |
+ IEEE80211_HE_MAC_CAP2_MU_CASCADING |
+ IEEE80211_HE_MAC_CAP2_ACK_EN,
+ .mac_cap_info[3] =
+ IEEE80211_HE_MAC_CAP3_OMI_CONTROL |
+ IEEE80211_HE_MAC_CAP3_MAX_AMPDU_LEN_EXP_VHT_2,
+ .mac_cap_info[4] = IEEE80211_HE_MAC_CAP4_AMDSU_IN_AMPDU,
+ .phy_cap_info[1] =
+ IEEE80211_HE_PHY_CAP1_PREAMBLE_PUNC_RX_MASK |
+ IEEE80211_HE_PHY_CAP1_DEVICE_CLASS_A |
+ IEEE80211_HE_PHY_CAP1_LDPC_CODING_IN_PAYLOAD |
+ IEEE80211_HE_PHY_CAP1_MIDAMBLE_RX_TX_MAX_NSTS,
+ .phy_cap_info[2] =
+ IEEE80211_HE_PHY_CAP2_NDP_4x_LTF_AND_3_2US |
+ IEEE80211_HE_PHY_CAP2_STBC_TX_UNDER_80MHZ |
+ IEEE80211_HE_PHY_CAP2_STBC_RX_UNDER_80MHZ |
+ IEEE80211_HE_PHY_CAP2_UL_MU_FULL_MU_MIMO |
+ IEEE80211_HE_PHY_CAP2_UL_MU_PARTIAL_MU_MIMO,
+
+ /* Leave all the other PHY capability bytes
+ * unset, as DCM, beam forming, RU and PPE
+ * threshold information are not supported
+ */
+ },
+ .he_mcs_nss_supp = {
+ .rx_mcs_80 = cpu_to_le16(0xfffa),
+ .tx_mcs_80 = cpu_to_le16(0xfffa),
+ .rx_mcs_160 = cpu_to_le16(0xffff),
+ .tx_mcs_160 = cpu_to_le16(0xffff),
+ .rx_mcs_80p80 = cpu_to_le16(0xffff),
+ .tx_mcs_80p80 = cpu_to_le16(0xffff),
+ },
},
- .he_mcs_nss_supp = {
- .rx_mcs_80 = cpu_to_le16(0xfffa),
- .tx_mcs_80 = cpu_to_le16(0xfffa),
- .rx_mcs_160 = cpu_to_le16(0xffff),
- .tx_mcs_160 = cpu_to_le16(0xffff),
- .rx_mcs_80p80 = cpu_to_le16(0xffff),
- .tx_mcs_80p80 = cpu_to_le16(0xffff),
+ },
+#ifdef CONFIG_MAC80211_MESH
+ {
+ /* TODO: should we support other types, e.g., IBSS?*/
+ .types_mask = BIT(NL80211_IFTYPE_MESH_POINT),
+ .he_cap = {
+ .has_he = true,
+ .he_cap_elem = {
+ .mac_cap_info[0] =
+ IEEE80211_HE_MAC_CAP0_HTC_HE,
+ .mac_cap_info[1] =
+ IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_RX_QOS_8,
+ .mac_cap_info[2] =
+ IEEE80211_HE_MAC_CAP2_ACK_EN,
+ .mac_cap_info[3] =
+ IEEE80211_HE_MAC_CAP3_OMI_CONTROL |
+ IEEE80211_HE_MAC_CAP3_MAX_AMPDU_LEN_EXP_VHT_2,
+ .mac_cap_info[4] = IEEE80211_HE_MAC_CAP4_AMDSU_IN_AMPDU,
+ .phy_cap_info[1] =
+ IEEE80211_HE_PHY_CAP1_PREAMBLE_PUNC_RX_MASK |
+ IEEE80211_HE_PHY_CAP1_DEVICE_CLASS_A |
+ IEEE80211_HE_PHY_CAP1_LDPC_CODING_IN_PAYLOAD |
+ IEEE80211_HE_PHY_CAP1_MIDAMBLE_RX_TX_MAX_NSTS,
+ .phy_cap_info[2] = 0,
+
+ /* Leave all the other PHY capability bytes
+ * unset, as DCM, beam forming, RU and PPE
+ * threshold information are not supported
+ */
+ },
+ .he_mcs_nss_supp = {
+ .rx_mcs_80 = cpu_to_le16(0xfffa),
+ .tx_mcs_80 = cpu_to_le16(0xfffa),
+ .rx_mcs_160 = cpu_to_le16(0xffff),
+ .tx_mcs_160 = cpu_to_le16(0xffff),
+ .rx_mcs_80p80 = cpu_to_le16(0xffff),
+ .tx_mcs_80p80 = cpu_to_le16(0xffff),
+ },
},
},
+#endif
};
-static const struct ieee80211_sband_iftype_data he_capa_5ghz = {
- /* TODO: should we support other types, e.g., P2P?*/
- .types_mask = BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_AP),
- .he_cap = {
- .has_he = true,
- .he_cap_elem = {
- .mac_cap_info[0] =
- IEEE80211_HE_MAC_CAP0_HTC_HE,
- .mac_cap_info[1] =
- IEEE80211_HE_MAC_CAP1_TF_MAC_PAD_DUR_16US |
- IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_RX_QOS_8,
- .mac_cap_info[2] =
- IEEE80211_HE_MAC_CAP2_BSR |
- IEEE80211_HE_MAC_CAP2_MU_CASCADING |
- IEEE80211_HE_MAC_CAP2_ACK_EN,
- .mac_cap_info[3] =
- IEEE80211_HE_MAC_CAP3_OMI_CONTROL |
- IEEE80211_HE_MAC_CAP3_MAX_AMPDU_LEN_EXP_VHT_2,
- .mac_cap_info[4] = IEEE80211_HE_MAC_CAP4_AMDSU_IN_AMPDU,
- .phy_cap_info[0] =
- IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_40MHZ_80MHZ_IN_5G |
- IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_160MHZ_IN_5G |
- IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_80PLUS80_MHZ_IN_5G,
- .phy_cap_info[1] =
- IEEE80211_HE_PHY_CAP1_PREAMBLE_PUNC_RX_MASK |
- IEEE80211_HE_PHY_CAP1_DEVICE_CLASS_A |
- IEEE80211_HE_PHY_CAP1_LDPC_CODING_IN_PAYLOAD |
- IEEE80211_HE_PHY_CAP1_MIDAMBLE_RX_TX_MAX_NSTS,
- .phy_cap_info[2] =
- IEEE80211_HE_PHY_CAP2_NDP_4x_LTF_AND_3_2US |
- IEEE80211_HE_PHY_CAP2_STBC_TX_UNDER_80MHZ |
- IEEE80211_HE_PHY_CAP2_STBC_RX_UNDER_80MHZ |
- IEEE80211_HE_PHY_CAP2_UL_MU_FULL_MU_MIMO |
- IEEE80211_HE_PHY_CAP2_UL_MU_PARTIAL_MU_MIMO,
-
- /* Leave all the other PHY capability bytes unset, as
- * DCM, beam forming, RU and PPE threshold information
- * are not supported
- */
+static const struct ieee80211_sband_iftype_data he_capa_5ghz[] = {
+ {
+ /* TODO: should we support other types, e.g., P2P?*/
+ .types_mask = BIT(NL80211_IFTYPE_STATION) |
+ BIT(NL80211_IFTYPE_AP),
+ .he_cap = {
+ .has_he = true,
+ .he_cap_elem = {
+ .mac_cap_info[0] =
+ IEEE80211_HE_MAC_CAP0_HTC_HE,
+ .mac_cap_info[1] =
+ IEEE80211_HE_MAC_CAP1_TF_MAC_PAD_DUR_16US |
+ IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_RX_QOS_8,
+ .mac_cap_info[2] =
+ IEEE80211_HE_MAC_CAP2_BSR |
+ IEEE80211_HE_MAC_CAP2_MU_CASCADING |
+ IEEE80211_HE_MAC_CAP2_ACK_EN,
+ .mac_cap_info[3] =
+ IEEE80211_HE_MAC_CAP3_OMI_CONTROL |
+ IEEE80211_HE_MAC_CAP3_MAX_AMPDU_LEN_EXP_VHT_2,
+ .mac_cap_info[4] = IEEE80211_HE_MAC_CAP4_AMDSU_IN_AMPDU,
+ .phy_cap_info[0] =
+ IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_40MHZ_80MHZ_IN_5G |
+ IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_160MHZ_IN_5G |
+ IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_80PLUS80_MHZ_IN_5G,
+ .phy_cap_info[1] =
+ IEEE80211_HE_PHY_CAP1_PREAMBLE_PUNC_RX_MASK |
+ IEEE80211_HE_PHY_CAP1_DEVICE_CLASS_A |
+ IEEE80211_HE_PHY_CAP1_LDPC_CODING_IN_PAYLOAD |
+ IEEE80211_HE_PHY_CAP1_MIDAMBLE_RX_TX_MAX_NSTS,
+ .phy_cap_info[2] =
+ IEEE80211_HE_PHY_CAP2_NDP_4x_LTF_AND_3_2US |
+ IEEE80211_HE_PHY_CAP2_STBC_TX_UNDER_80MHZ |
+ IEEE80211_HE_PHY_CAP2_STBC_RX_UNDER_80MHZ |
+ IEEE80211_HE_PHY_CAP2_UL_MU_FULL_MU_MIMO |
+ IEEE80211_HE_PHY_CAP2_UL_MU_PARTIAL_MU_MIMO,
+
+ /* Leave all the other PHY capability bytes
+ * unset, as DCM, beam forming, RU and PPE
+ * threshold information are not supported
+ */
+ },
+ .he_mcs_nss_supp = {
+ .rx_mcs_80 = cpu_to_le16(0xfffa),
+ .tx_mcs_80 = cpu_to_le16(0xfffa),
+ .rx_mcs_160 = cpu_to_le16(0xfffa),
+ .tx_mcs_160 = cpu_to_le16(0xfffa),
+ .rx_mcs_80p80 = cpu_to_le16(0xfffa),
+ .tx_mcs_80p80 = cpu_to_le16(0xfffa),
+ },
},
- .he_mcs_nss_supp = {
- .rx_mcs_80 = cpu_to_le16(0xfffa),
- .tx_mcs_80 = cpu_to_le16(0xfffa),
- .rx_mcs_160 = cpu_to_le16(0xfffa),
- .tx_mcs_160 = cpu_to_le16(0xfffa),
- .rx_mcs_80p80 = cpu_to_le16(0xfffa),
- .tx_mcs_80p80 = cpu_to_le16(0xfffa),
+ },
+#ifdef CONFIG_MAC80211_MESH
+ {
+ /* TODO: should we support other types, e.g., IBSS?*/
+ .types_mask = BIT(NL80211_IFTYPE_MESH_POINT),
+ .he_cap = {
+ .has_he = true,
+ .he_cap_elem = {
+ .mac_cap_info[0] =
+ IEEE80211_HE_MAC_CAP0_HTC_HE,
+ .mac_cap_info[1] =
+ IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_RX_QOS_8,
+ .mac_cap_info[2] =
+ IEEE80211_HE_MAC_CAP2_ACK_EN,
+ .mac_cap_info[3] =
+ IEEE80211_HE_MAC_CAP3_OMI_CONTROL |
+ IEEE80211_HE_MAC_CAP3_MAX_AMPDU_LEN_EXP_VHT_2,
+ .mac_cap_info[4] = IEEE80211_HE_MAC_CAP4_AMDSU_IN_AMPDU,
+ .phy_cap_info[0] =
+ IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_40MHZ_80MHZ_IN_5G |
+ IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_160MHZ_IN_5G |
+ IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_80PLUS80_MHZ_IN_5G,
+ .phy_cap_info[1] =
+ IEEE80211_HE_PHY_CAP1_PREAMBLE_PUNC_RX_MASK |
+ IEEE80211_HE_PHY_CAP1_DEVICE_CLASS_A |
+ IEEE80211_HE_PHY_CAP1_LDPC_CODING_IN_PAYLOAD |
+ IEEE80211_HE_PHY_CAP1_MIDAMBLE_RX_TX_MAX_NSTS,
+ .phy_cap_info[2] = 0,
+
+ /* Leave all the other PHY capability bytes
+ * unset, as DCM, beam forming, RU and PPE
+ * threshold information are not supported
+ */
+ },
+ .he_mcs_nss_supp = {
+ .rx_mcs_80 = cpu_to_le16(0xfffa),
+ .tx_mcs_80 = cpu_to_le16(0xfffa),
+ .rx_mcs_160 = cpu_to_le16(0xfffa),
+ .tx_mcs_160 = cpu_to_le16(0xfffa),
+ .rx_mcs_80p80 = cpu_to_le16(0xfffa),
+ .tx_mcs_80p80 = cpu_to_le16(0xfffa),
+ },
},
},
+#endif
};
static void mac80211_hswim_he_capab(struct ieee80211_supported_band *sband)
{
- if (sband->band == NL80211_BAND_2GHZ)
+ u16 n_iftype_data;
+
+ if (sband->band == NL80211_BAND_2GHZ) {
+ n_iftype_data = ARRAY_SIZE(he_capa_2ghz);
sband->iftype_data =
- (struct ieee80211_sband_iftype_data *)&he_capa_2ghz;
- else if (sband->band == NL80211_BAND_5GHZ)
+ (struct ieee80211_sband_iftype_data *)he_capa_2ghz;
+ } else if (sband->band == NL80211_BAND_5GHZ) {
+ n_iftype_data = ARRAY_SIZE(he_capa_5ghz);
sband->iftype_data =
- (struct ieee80211_sband_iftype_data *)&he_capa_5ghz;
- else
+ (struct ieee80211_sband_iftype_data *)he_capa_5ghz;
+ } else {
return;
+ }
- sband->n_iftype_data = 1;
+ sband->n_iftype_data = n_iftype_data;
}
#ifdef CONFIG_MAC80211_MESH
--
2.20.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH v4 3/3] ath11k: register HE mesh capabilities
2019-07-03 10:18 [PATCH v4 0/3] mac80211/ath11k: HE mesh support Sven Eckelmann
2019-07-03 10:18 ` [PATCH v4 1/3] mac80211: implement HE support for mesh Sven Eckelmann
2019-07-03 10:18 ` [PATCH v4 2/3] mac80211_hwsim: Register support for HE meshpoint Sven Eckelmann
@ 2019-07-03 10:18 ` Sven Eckelmann
2 siblings, 0 replies; 4+ messages in thread
From: Sven Eckelmann @ 2019-07-03 10:18 UTC (permalink / raw)
To: linux-wireless; +Cc: ath11k, Sven Eckelmann
From: Sven Eckelmann <seckelmann@datto.com>
The capabilities for the HE mesh are generated from the capabilities
reported by the fw. But the firmware only reports the overall capabilities
and not the one which are specific for mesh. Some of them (TWT, MU UL/DL,
TB PPDU, ...) require an infrastructure setup with a main STA (AP)
controlling the operations. This is not the case for mesh and thus these
capabilities are removed from the list of capabilities.
Signed-off-by: Sven Eckelmann <seckelmann@datto.com>
---
drivers/net/wireless/ath/ath11k/mac.c | 56 +++++++++++++++++++++++++++
1 file changed, 56 insertions(+)
diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index dd164b5bb51a..3a3296b83cc1 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -3150,6 +3150,7 @@ static int ath11k_mac_copy_he_cap(struct ath11k *ar,
switch (i) {
case NL80211_IFTYPE_STATION:
case NL80211_IFTYPE_AP:
+ case NL80211_IFTYPE_MESH_POINT:
break;
default:
@@ -3190,6 +3191,61 @@ static int ath11k_mac_copy_he_cap(struct ath11k *ar,
he_cap_elem->phy_cap_info[9] |=
IEEE80211_HE_PHY_CAP9_TX_1024_QAM_LESS_THAN_242_TONE_RU;
break;
+ case NL80211_IFTYPE_MESH_POINT:
+ he_cap_elem->mac_cap_info[0] &=
+ ~(IEEE80211_HE_MAC_CAP0_TWT_RES |
+ IEEE80211_HE_MAC_CAP0_TWT_REQ);
+ he_cap_elem->mac_cap_info[2] &=
+ ~(IEEE80211_HE_MAC_CAP2_TRS |
+ IEEE80211_HE_MAC_CAP2_BCAST_TWT |
+ IEEE80211_HE_MAC_CAP2_MU_CASCADING);
+ he_cap_elem->mac_cap_info[3] &=
+ ~(IEEE80211_HE_MAC_CAP3_FLEX_TWT_SCHED |
+ IEEE80211_HE_MAC_CAP2_BCAST_TWT |
+ IEEE80211_HE_MAC_CAP2_MU_CASCADING);
+ he_cap_elem->mac_cap_info[4] &=
+ ~(IEEE80211_HE_MAC_CAP4_BSRP_BQRP_A_MPDU_AGG |
+ IEEE80211_HE_MAC_CAP4_BQR);
+ he_cap_elem->mac_cap_info[5] &=
+ ~(IEEE80211_HE_MAC_CAP5_SUBCHAN_SELECVITE_TRANSMISSION |
+ IEEE80211_HE_MAC_CAP5_UL_2x996_TONE_RU |
+ IEEE80211_HE_MAC_CAP5_PUNCTURED_SOUNDING |
+ IEEE80211_HE_MAC_CAP5_HT_VHT_TRIG_FRAME_RX);
+
+ he_cap_elem->phy_cap_info[2] &=
+ ~(IEEE80211_HE_PHY_CAP2_UL_MU_FULL_MU_MIMO |
+ IEEE80211_HE_PHY_CAP2_UL_MU_PARTIAL_MU_MIMO);
+ he_cap_elem->phy_cap_info[3] &=
+ ~(IEEE80211_HE_PHY_CAP3_RX_HE_MU_PPDU_FROM_NON_AP_STA |
+ IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_TX_MASK |
+ IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_RX_MASK);
+ he_cap_elem->phy_cap_info[4] &=
+ ~IEEE80211_HE_PHY_CAP4_MU_BEAMFORMER;
+ he_cap_elem->phy_cap_info[5] &=
+ ~IEEE80211_HE_PHY_CAP5_NG16_MU_FEEDBACK;
+ he_cap_elem->phy_cap_info[6] &=
+ ~(IEEE80211_HE_PHY_CAP6_CODEBOOK_SIZE_75_MU |
+ IEEE80211_HE_PHY_CAP6_TRIG_MU_BEAMFORMER_FB |
+ IEEE80211_HE_PHY_CAP6_TRIG_CQI_FB |
+ IEEE80211_HE_PHY_CAP6_PARTIAL_BANDWIDTH_DL_MUMIMO);
+ he_cap_elem->phy_cap_info[7] &=
+ ~(IEEE80211_HE_PHY_CAP7_SRP_BASED_SR |
+ IEEE80211_HE_PHY_CAP7_POWER_BOOST_FACTOR_AR |
+ IEEE80211_HE_PHY_CAP7_STBC_TX_ABOVE_80MHZ |
+ IEEE80211_HE_PHY_CAP7_STBC_RX_ABOVE_80MHZ);
+ he_cap_elem->phy_cap_info[8] &=
+ ~(IEEE80211_HE_PHY_CAP8_HE_ER_SU_PPDU_4XLTF_AND_08_US_GI |
+ IEEE80211_HE_PHY_CAP8_20MHZ_IN_40MHZ_HE_PPDU_IN_2G |
+ IEEE80211_HE_PHY_CAP8_20MHZ_IN_160MHZ_HE_PPDU |
+ IEEE80211_HE_PHY_CAP8_80MHZ_IN_160MHZ_HE_PPDU);
+ he_cap_elem->phy_cap_info[9] &=
+ ~(IEEE80211_HE_PHY_CAP9_LONGER_THAN_16_SIGB_OFDM_SYM |
+ IEEE80211_HE_PHY_CAP9_NON_TRIGGERED_CQI_FEEDBACK |
+ IEEE80211_HE_PHY_CAP9_RX_1024_QAM_LESS_THAN_242_TONE_RU |
+ IEEE80211_HE_PHY_CAP9_TX_1024_QAM_LESS_THAN_242_TONE_RU |
+ IEEE80211_HE_PHY_CAP9_RX_FULL_BW_SU_USING_MU_WITH_COMP_SIGB |
+ IEEE80211_HE_PHY_CAP9_RX_FULL_BW_SU_USING_MU_WITH_NON_COMP_SIGB);
+ break;
}
he_cap->he_mcs_nss_supp.rx_mcs_80 =
--
2.20.1
^ permalink raw reply related [flat|nested] 4+ messages in thread
end of thread, other threads:[~2019-07-03 10:19 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-07-03 10:18 [PATCH v4 0/3] mac80211/ath11k: HE mesh support Sven Eckelmann
2019-07-03 10:18 ` [PATCH v4 1/3] mac80211: implement HE support for mesh Sven Eckelmann
2019-07-03 10:18 ` [PATCH v4 2/3] mac80211_hwsim: Register support for HE meshpoint Sven Eckelmann
2019-07-03 10:18 ` [PATCH v4 3/3] ath11k: register HE mesh capabilities Sven Eckelmann
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).