From: <yhchuang@realtek.com>
To: <kvalo@codeaurora.org>
Cc: <linux-wireless@vger.kernel.org>, <briannorris@chromium.org>
Subject: [PATCH 10/14] rtw88: configure TX queue EDCA parameters
Date: Wed, 2 Oct 2019 14:35:27 +0800 [thread overview]
Message-ID: <20191002063531.18135-11-yhchuang@realtek.com> (raw)
In-Reply-To: <20191002063531.18135-1-yhchuang@realtek.com>
From: Yan-Hsuan Chuang <yhchuang@realtek.com>
Set CWmax/CWmin, TXOP and AIFS according to ieee80211_tx_queue_params.
Do note that hardware has only one group of EDCA[ac] registers, if more
than one vif are added, the EDCA[ac] registers will contain value of
params of the most recent set by ieee80211_ops::conf_tx().
And AIFS = AIFSN[ac] * slot_time + SIFS, so if use_short_slot is changed,
need to also change AIFS.
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
---
drivers/net/wireless/realtek/rtw88/mac80211.c | 71 +++++++++++++++++++
drivers/net/wireless/realtek/rtw88/main.h | 8 +++
drivers/net/wireless/realtek/rtw88/reg.h | 4 ++
3 files changed, 83 insertions(+)
diff --git a/drivers/net/wireless/realtek/rtw88/mac80211.c b/drivers/net/wireless/realtek/rtw88/mac80211.c
index cb7436949ff6..d03b0b7a0e70 100644
--- a/drivers/net/wireless/realtek/rtw88/mac80211.c
+++ b/drivers/net/wireless/realtek/rtw88/mac80211.c
@@ -269,6 +269,54 @@ static void rtw_ops_configure_filter(struct ieee80211_hw *hw,
mutex_unlock(&rtwdev->mutex);
}
+/* Only have one group of EDCA parameters now */
+static const u32 ac_to_edca_param[IEEE80211_NUM_ACS] = {
+ [IEEE80211_AC_VO] = REG_EDCA_VO_PARAM,
+ [IEEE80211_AC_VI] = REG_EDCA_VI_PARAM,
+ [IEEE80211_AC_BE] = REG_EDCA_BE_PARAM,
+ [IEEE80211_AC_BK] = REG_EDCA_BK_PARAM,
+};
+
+static u8 rtw_aifsn_to_aifs(struct rtw_dev *rtwdev,
+ struct rtw_vif *rtwvif, u8 aifsn)
+{
+ struct ieee80211_vif *vif = rtwvif_to_vif(rtwvif);
+ u8 slot_time;
+ u8 sifs;
+
+ slot_time = vif->bss_conf.use_short_slot ? 9 : 20;
+ sifs = rtwdev->hal.current_band_type == RTW_BAND_5G ? 16 : 10;
+
+ return aifsn * slot_time + sifs;
+}
+
+static void __rtw_conf_tx(struct rtw_dev *rtwdev,
+ struct rtw_vif *rtwvif, u16 ac)
+{
+ struct ieee80211_tx_queue_params *params = &rtwvif->tx_params[ac];
+ u32 edca_param = ac_to_edca_param[ac];
+ u8 ecw_max, ecw_min;
+ u8 aifs;
+
+ /* 2^ecw - 1 = cw; ecw = log2(cw + 1) */
+ ecw_max = ilog2(params->cw_max + 1);
+ ecw_min = ilog2(params->cw_min + 1);
+ aifs = rtw_aifsn_to_aifs(rtwdev, rtwvif, params->aifs);
+ rtw_write32_mask(rtwdev, edca_param, BIT_MASK_TXOP_LMT, params->txop);
+ rtw_write32_mask(rtwdev, edca_param, BIT_MASK_CWMAX, ecw_max);
+ rtw_write32_mask(rtwdev, edca_param, BIT_MASK_CWMIN, ecw_min);
+ rtw_write32_mask(rtwdev, edca_param, BIT_MASK_AIFS, aifs);
+}
+
+static void rtw_conf_tx(struct rtw_dev *rtwdev,
+ struct rtw_vif *rtwvif)
+{
+ u16 ac;
+
+ for (ac = 0; ac < IEEE80211_NUM_ACS; ac++)
+ __rtw_conf_tx(rtwdev, rtwvif, ac);
+}
+
static void rtw_ops_bss_info_changed(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ieee80211_bss_conf *conf,
@@ -320,11 +368,33 @@ static void rtw_ops_bss_info_changed(struct ieee80211_hw *hw,
if (changed & BSS_CHANGED_BEACON)
rtw_fw_download_rsvd_page(rtwdev, vif);
+ if (changed & BSS_CHANGED_ERP_SLOT)
+ rtw_conf_tx(rtwdev, rtwvif);
+
rtw_vif_port_config(rtwdev, rtwvif, config);
mutex_unlock(&rtwdev->mutex);
}
+static int rtw_ops_conf_tx(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif, u16 ac,
+ const struct ieee80211_tx_queue_params *params)
+{
+ struct rtw_dev *rtwdev = hw->priv;
+ struct rtw_vif *rtwvif = (struct rtw_vif *)vif->drv_priv;
+
+ mutex_lock(&rtwdev->mutex);
+
+ rtw_leave_lps_deep(rtwdev);
+
+ rtwvif->tx_params[ac] = *params;
+ __rtw_conf_tx(rtwdev, rtwvif, ac);
+
+ mutex_unlock(&rtwdev->mutex);
+
+ return 0;
+}
+
static u8 rtw_acquire_macid(struct rtw_dev *rtwdev)
{
unsigned long mac_id;
@@ -612,6 +682,7 @@ const struct ieee80211_ops rtw_ops = {
.remove_interface = rtw_ops_remove_interface,
.configure_filter = rtw_ops_configure_filter,
.bss_info_changed = rtw_ops_bss_info_changed,
+ .conf_tx = rtw_ops_conf_tx,
.sta_add = rtw_ops_sta_add,
.sta_remove = rtw_ops_sta_remove,
.set_key = rtw_ops_set_key,
diff --git a/drivers/net/wireless/realtek/rtw88/main.h b/drivers/net/wireless/realtek/rtw88/main.h
index 00d2cf07a176..f3eab96dba86 100644
--- a/drivers/net/wireless/realtek/rtw88/main.h
+++ b/drivers/net/wireless/realtek/rtw88/main.h
@@ -641,6 +641,7 @@ struct rtw_vif {
u8 bssid[ETH_ALEN];
u8 port;
u8 bcn_ctrl;
+ struct ieee80211_tx_queue_params tx_params[IEEE80211_NUM_ACS];
const struct rtw_vif_port *conf;
struct rtw_traffic_stats stats;
@@ -1432,6 +1433,13 @@ static inline struct ieee80211_txq *rtwtxq_to_txq(struct rtw_txq *rtwtxq)
return container_of(p, struct ieee80211_txq, drv_priv);
}
+static inline struct ieee80211_vif *rtwvif_to_vif(struct rtw_vif *rtwvif)
+{
+ void *p = rtwvif;
+
+ return container_of(p, struct ieee80211_vif, drv_priv);
+}
+
void rtw_get_channel_params(struct cfg80211_chan_def *chandef,
struct rtw_channel_params *ch_param);
bool check_hw_ready(struct rtw_dev *rtwdev, u32 addr, u32 mask, u32 target);
diff --git a/drivers/net/wireless/realtek/rtw88/reg.h b/drivers/net/wireless/realtek/rtw88/reg.h
index 60014077de77..bd04c3fad1ee 100644
--- a/drivers/net/wireless/realtek/rtw88/reg.h
+++ b/drivers/net/wireless/realtek/rtw88/reg.h
@@ -239,6 +239,10 @@
#define REG_EDCA_VI_PARAM 0x0504
#define REG_EDCA_BE_PARAM 0x0508
#define REG_EDCA_BK_PARAM 0x050C
+#define BIT_MASK_TXOP_LMT GENMASK(26, 16)
+#define BIT_MASK_CWMAX GENMASK(15, 12)
+#define BIT_MASK_CWMIN GENMASK(11, 8)
+#define BIT_MASK_AIFS GENMASK(7, 0)
#define REG_PIFS 0x0512
#define REG_SIFS 0x0514
#define BIT_SHIFT_SIFS_OFDM_CTX 8
--
2.17.1
next prev parent reply other threads:[~2019-10-02 6:35 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-02 6:35 [PATCH 00/14] rtw88: add software TX queue support yhchuang
2019-10-02 6:35 ` [PATCH 01/14] rtw88: check firmware leave lps successfully yhchuang
2019-10-04 13:45 ` Kalle Valo
2019-10-02 6:35 ` [PATCH 02/14] rtw88: allows to set RTS in TX descriptor yhchuang
2019-10-02 6:35 ` [PATCH 03/14] rtw88: add driver TX queue support yhchuang
2019-10-02 6:35 ` [PATCH 04/14] rtw88: take over rate control from mac80211 yhchuang
2019-10-02 6:35 ` [PATCH 05/14] rtw88: report tx rate to mac80211 stack yhchuang
2019-10-02 6:35 ` [PATCH 06/14] rtw88: add TX-AMSDU support yhchuang
2019-10-02 6:35 ` [PATCH 07/14] rtw88: flush hardware tx queues yhchuang
2019-10-02 6:35 ` [PATCH 08/14] rtw88: fix beaconing mode rsvd_page memory violation issue yhchuang
2019-10-02 6:35 ` [PATCH 09/14] rtw88: Don't set RX_FLAG_DECRYPTED if packet has no encryption yhchuang
2019-10-02 6:35 ` yhchuang [this message]
2019-10-02 6:35 ` [PATCH 11/14] rtw88: raise firmware version debug level yhchuang
2019-10-02 6:35 ` [PATCH 12/14] rtw88: use struct rtw_fw_hdr to access firmware header yhchuang
2019-10-02 6:35 ` [PATCH 13/14] rtw88: fix NSS of hw_cap yhchuang
2019-10-02 6:35 ` [PATCH 14/14] rtw88: fix error handling when setup efuse info yhchuang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191002063531.18135-11-yhchuang@realtek.com \
--to=yhchuang@realtek.com \
--cc=briannorris@chromium.org \
--cc=kvalo@codeaurora.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).