From: Thomas Pedersen <thomas@adapt-ip.com>
To: Johannes Berg <johannes@sipsolutions.net>
Cc: linux-wireless <linux-wireless@vger.kernel.org>,
Thomas Pedersen <thomas@adapt-ip.com>
Subject: [PATCH v2 01/22] ieee80211: redefine S1G bits with GENMASK
Date: Mon, 31 Aug 2020 13:55:39 -0700 [thread overview]
Message-ID: <20200831205600.21058-2-thomas@adapt-ip.com> (raw)
In-Reply-To: <20200831205600.21058-1-thomas@adapt-ip.com>
The S1G capability fields were defined by ORing BITS()
together, and expecting a custom macro to use the _SHIFT
definitions. Use the Linux kernel GENMASK for the
definitions now, and FIELD_{GET,PREP} to access the fields
in the future.
Take the chance to rename eg. S1G_CAPAB_B0 to the more
compact S1G_CAP0.
Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
---
include/linux/ieee80211.h | 156 +++++++++++++++++++-------------------
1 file changed, 78 insertions(+), 78 deletions(-)
diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index c47f43e65a2f..53fba39d4ba6 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -2330,84 +2330,84 @@ ieee80211_he_spr_size(const u8 *he_spr_ie)
}
/* S1G Capabilities Information field */
-#define S1G_CAPAB_B0_S1G_LONG BIT(0)
-#define S1G_CAPAB_B0_SGI_1MHZ BIT(1)
-#define S1G_CAPAB_B0_SGI_2MHZ BIT(2)
-#define S1G_CAPAB_B0_SGI_4MHZ BIT(3)
-#define S1G_CAPAB_B0_SGI_8MHZ BIT(4)
-#define S1G_CAPAB_B0_SGI_16MHZ BIT(5)
-#define S1G_CAPAB_B0_SUPP_CH_WIDTH_MASK (BIT(6) | BIT(7))
-#define S1G_CAPAB_B0_SUPP_CH_WIDTH_SHIFT 6
-
-#define S1G_CAPAB_B1_RX_LDPC BIT(0)
-#define S1G_CAPAB_B1_TX_STBC BIT(1)
-#define S1G_CAPAB_B1_RX_STBC BIT(2)
-#define S1G_CAPAB_B1_SU_BFER BIT(3)
-#define S1G_CAPAB_B1_SU_BFEE BIT(4)
-#define S1G_CAPAB_B1_BFEE_STS_MASK (BIT(5) | BIT(6) | BIT(7))
-#define S1G_CAPAB_B1_BFEE_STS_SHIFT 5
-
-#define S1G_CAPAB_B2_SOUNDING_DIMENSIONS_MASK (BIT(0) | BIT(1) | BIT(2))
-#define S1G_CAPAB_B2_SOUNDING_DIMENSIONS_SHIFT 0
-#define S1G_CAPAB_B2_MU_BFER BIT(3)
-#define S1G_CAPAB_B2_MU_BFEE BIT(4)
-#define S1G_CAPAB_B2_PLUS_HTC_VHT BIT(5)
-#define S1G_CAPAB_B2_TRAVELING_PILOT_MASK (BIT(6) | BIT(7))
-#define S1G_CAPAB_B2_TRAVELING_PILOT_SHIFT 6
-
-#define S1G_CAPAB_B3_RD_RESPONDER BIT(0)
-#define S1G_CAPAB_B3_HT_DELAYED_BA BIT(1)
-#define S1G_CAPAB_B3_MAX_MPDU_LEN BIT(2)
-#define S1G_CAPAB_B3_MAX_AMPDU_LEN_EXP_MASK (BIT(3) | BIT(4))
-#define S1G_CAPAB_B3_MAX_AMPDU_LEN_EXP_SHIFT 3
-#define S1G_CAPAB_B3_MIN_MPDU_START_MASK (BIT(5) | BIT(6) | BIT(7))
-#define S1G_CAPAB_B3_MIN_MPDU_START_SHIFT 5
-
-#define S1G_CAPAB_B4_UPLINK_SYNC BIT(0)
-#define S1G_CAPAB_B4_DYNAMIC_AID BIT(1)
-#define S1G_CAPAB_B4_BAT BIT(2)
-#define S1G_CAPAB_B4_TIME_ADE BIT(3)
-#define S1G_CAPAB_B4_NON_TIM BIT(4)
-#define S1G_CAPAB_B4_GROUP_AID BIT(5)
-#define S1G_CAPAB_B4_STA_TYPE_MASK (BIT(6) | BIT(7))
-#define S1G_CAPAB_B4_STA_TYPE_SHIFT 6
-
-#define S1G_CAPAB_B5_CENT_AUTH_CONTROL BIT(0)
-#define S1G_CAPAB_B5_DIST_AUTH_CONTROL BIT(1)
-#define S1G_CAPAB_B5_AMSDU BIT(2)
-#define S1G_CAPAB_B5_AMPDU BIT(3)
-#define S1G_CAPAB_B5_ASYMMETRIC_BA BIT(4)
-#define S1G_CAPAB_B5_FLOW_CONTROL BIT(5)
-#define S1G_CAPAB_B5_SECTORIZED_BEAM_MASK (BIT(6) | BIT(7))
-#define S1G_CAPAB_B5_SECTORIZED_BEAM_SHIFT 6
-
-#define S1G_CAPAB_B6_OBSS_MITIGATION BIT(0)
-#define S1G_CAPAB_B6_FRAGMENT_BA BIT(1)
-#define S1G_CAPAB_B6_NDP_PS_POLL BIT(2)
-#define S1G_CAPAB_B6_RAW_OPERATION BIT(3)
-#define S1G_CAPAB_B6_PAGE_SLICING BIT(4)
-#define S1G_CAPAB_B6_TXOP_SHARING_IMP_ACK BIT(5)
-#define S1G_CAPAB_B6_VHT_LINK_ADAPT_MASK (BIT(6) | BIT(7))
-#define S1G_CAPAB_B6_VHT_LINK_ADAPT_SHIFT 6
-
-#define S1G_CAPAB_B7_TACK_AS_PS_POLL BIT(0)
-#define S1G_CAPAB_B7_DUP_1MHZ BIT(1)
-#define S1G_CAPAB_B7_MCS_NEGOTIATION BIT(2)
-#define S1G_CAPAB_B7_1MHZ_CTL_RESPONSE_PREAMBLE BIT(3)
-#define S1G_CAPAB_B7_NDP_BFING_REPORT_POLL BIT(4)
-#define S1G_CAPAB_B7_UNSOLICITED_DYN_AID BIT(5)
-#define S1G_CAPAB_B7_SECTOR_TRAINING_OPERATION BIT(6)
-#define S1G_CAPAB_B7_TEMP_PS_MODE_SWITCH BIT(7)
-
-#define S1G_CAPAB_B8_TWT_GROUPING BIT(0)
-#define S1G_CAPAB_B8_BDT BIT(1)
-#define S1G_CAPAB_B8_COLOR_MASK (BIT(2) | BIT(3) | BIT(4))
-#define S1G_CAPAB_B8_COLOR_SHIFT 2
-#define S1G_CAPAB_B8_TWT_REQUEST BIT(5)
-#define S1G_CAPAB_B8_TWT_RESPOND BIT(6)
-#define S1G_CAPAB_B8_PV1_FRAME BIT(7)
-
-#define S1G_CAPAB_B9_LINK_ADAPT_PER_CONTROL_RESPONSE BIT(0)
+#define S1G_CAP0_S1G_LONG BIT(0)
+#define S1G_CAP0_SGI_1MHZ BIT(1)
+#define S1G_CAP0_SGI_2MHZ BIT(2)
+#define S1G_CAP0_SGI_4MHZ BIT(3)
+#define S1G_CAP0_SGI_8MHZ BIT(4)
+#define S1G_CAP0_SGI_16MHZ BIT(5)
+#define S1G_CAP0_SUPP_CH_WIDTH GENMASK(7, 6)
+
+#define S1G_SUPP_CH_WIDTH_2 0
+#define S1G_SUPP_CH_WIDTH_4 1
+#define S1G_SUPP_CH_WIDTH_8 2
+#define S1G_SUPP_CH_WIDTH_16 3
+#define S1G_SUPP_CH_WIDTH_MAX(cap) ((1 << FIELD_GET(S1G_CAP0_SUPP_CH_WIDTH, \
+ cap[0])) << 1)
+
+#define S1G_CAP1_RX_LDPC BIT(0)
+#define S1G_CAP1_TX_STBC BIT(1)
+#define S1G_CAP1_RX_STBC BIT(2)
+#define S1G_CAP1_SU_BFER BIT(3)
+#define S1G_CAP1_SU_BFEE BIT(4)
+#define S1G_CAP1_BFEE_STS GENMASK(7, 5)
+
+#define S1G_CAP2_SOUNDING_DIMENSIONS GENMASK(2, 0)
+#define S1G_CAP2_MU_BFER BIT(3)
+#define S1G_CAP2_MU_BFEE BIT(4)
+#define S1G_CAP2_PLUS_HTC_VHT BIT(5)
+#define S1G_CAP2_TRAVELING_PILOT GENMASK(7, 6)
+
+#define S1G_CAP3_RD_RESPONDER BIT(0)
+#define S1G_CAP3_HT_DELAYED_BA BIT(1)
+#define S1G_CAP3_MAX_MPDU_LEN BIT(2)
+#define S1G_CAP3_MAX_AMPDU_LEN_EXP GENMASK(4, 3)
+#define S1G_CAP3_MIN_MPDU_START GENMASK(7, 5)
+
+#define S1G_CAP4_UPLINK_SYNC BIT(0)
+#define S1G_CAP4_DYNAMIC_AID BIT(1)
+#define S1G_CAP4_BAT BIT(2)
+#define S1G_CAP4_TIME_ADE BIT(3)
+#define S1G_CAP4_NON_TIM BIT(4)
+#define S1G_CAP4_GROUP_AID BIT(5)
+#define S1G_CAP4_STA_TYPE GENMASK(7, 6)
+
+#define S1G_CAP5_CENT_AUTH_CONTROL BIT(0)
+#define S1G_CAP5_DIST_AUTH_CONTROL BIT(1)
+#define S1G_CAP5_AMSDU BIT(2)
+#define S1G_CAP5_AMPDU BIT(3)
+#define S1G_CAP5_ASYMMETRIC_BA BIT(4)
+#define S1G_CAP5_FLOW_CONTROL BIT(5)
+#define S1G_CAP5_SECTORIZED_BEAM GENMASK(7, 6)
+
+#define S1G_CAP6_OBSS_MITIGATION BIT(0)
+#define S1G_CAP6_FRAGMENT_BA BIT(1)
+#define S1G_CAP6_NDP_PS_POLL BIT(2)
+#define S1G_CAP6_RAW_OPERATION BIT(3)
+#define S1G_CAP6_PAGE_SLICING BIT(4)
+#define S1G_CAP6_TXOP_SHARING_IMP_ACK BIT(5)
+#define S1G_CAP6_VHT_LINK_ADAPT GENMASK(7, 6)
+
+#define S1G_CAP7_TACK_AS_PS_POLL BIT(0)
+#define S1G_CAP7_DUP_1MHZ BIT(1)
+#define S1G_CAP7_MCS_NEGOTIATION BIT(2)
+#define S1G_CAP7_1MHZ_CTL_RESPONSE_PREAMBLE BIT(3)
+#define S1G_CAP7_NDP_BFING_REPORT_POLL BIT(4)
+#define S1G_CAP7_UNSOLICITED_DYN_AID BIT(5)
+#define S1G_CAP7_SECTOR_TRAINING_OPERATION BIT(6)
+#define S1G_CAP7_TEMP_PS_MODE_SWITCH BIT(7)
+
+#define S1G_CAP8_TWT_GROUPING BIT(0)
+#define S1G_CAP8_BDT BIT(1)
+#define S1G_CAP8_COLOR GENMASK(4, 2)
+#define S1G_CAP8_TWT_REQUEST BIT(5)
+#define S1G_CAP8_TWT_RESPOND BIT(6)
+#define S1G_CAP8_PV1_FRAME BIT(7)
+
+#define S1G_CAP9_LINK_ADAPT_PER_CONTROL_RESPONSE BIT(0)
+
+#define S1G_OPER_CH_WIDTH_PRIMARY_1MHZ BIT(0)
+#define S1G_OPER_CH_WIDTH_OPER GENMASK(4, 1)
/* Authentication algorithms */
#define WLAN_AUTH_OPEN 0
--
2.20.1
next prev parent reply other threads:[~2020-08-31 20:56 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-31 20:55 [PATCH v2 00/22] add support for S1G association Thomas Pedersen
2020-08-31 20:55 ` Thomas Pedersen [this message]
2020-08-31 20:55 ` [PATCH v2 02/22] nl80211: advertise supported channel width in S1G Thomas Pedersen
2020-08-31 20:55 ` [PATCH v2 03/22] cfg80211: regulatory: handle S1G channels Thomas Pedersen
2020-09-05 18:38 ` Thomas Pedersen
2020-08-31 20:55 ` [PATCH v2 04/22] nl80211: correctly validate S1G beacon head Thomas Pedersen
2020-08-31 20:55 ` [PATCH v2 05/22] nl80211: support setting S1G channels Thomas Pedersen
2020-08-31 20:55 ` [PATCH v2 06/22] {cfg,mac}80211: get correct default channel width for S1G Thomas Pedersen
2020-09-18 10:38 ` Johannes Berg
2020-09-21 4:59 ` Thomas Pedersen
2020-09-21 7:01 ` Johannes Berg
2020-09-21 16:26 ` Thomas Pedersen
2020-08-31 20:55 ` [PATCH v2 07/22] mac80211: s1g: choose scanning width based on frequency Thomas Pedersen
2020-09-18 10:40 ` Johannes Berg
2020-09-21 5:06 ` Thomas Pedersen
2020-09-21 6:58 ` Johannes Berg
2020-08-31 20:55 ` [PATCH v2 08/22] nl80211: support S1G capabilities Thomas Pedersen
2020-09-18 10:41 ` Johannes Berg
2020-09-18 10:47 ` Johannes Berg
2020-09-21 4:34 ` Thomas Pedersen
2020-08-31 20:55 ` [PATCH v2 09/22] mac80211: support S1G STA capabilities Thomas Pedersen
2020-08-31 20:55 ` [PATCH v2 10/22] cfg80211: convert S1G beacon to scan results Thomas Pedersen
2020-08-31 20:55 ` [PATCH v2 11/22] cfg80211: parse S1G Operation element for BSS channel Thomas Pedersen
2020-09-18 10:45 ` Johannes Berg
2020-09-21 5:12 ` Thomas Pedersen
2020-09-21 6:54 ` Johannes Berg
2020-08-31 20:55 ` [PATCH v2 12/22] mac80211: convert S1G beacon to scan results Thomas Pedersen
2020-09-18 10:48 ` Johannes Berg
2020-09-21 5:45 ` Thomas Pedersen
2020-08-31 20:55 ` [PATCH v2 13/22] cfg80211: handle Association Response from S1G STA Thomas Pedersen
2020-09-18 10:50 ` Johannes Berg
2020-09-21 5:52 ` Thomas Pedersen
2020-08-31 20:55 ` [PATCH v2 14/22] mac80211: encode listen interval for S1G Thomas Pedersen
2020-09-18 10:51 ` Johannes Berg
2020-09-21 5:56 ` Thomas Pedersen
2020-08-31 20:55 ` [PATCH v2 15/22] mac80211: don't calculate duration " Thomas Pedersen
2020-09-18 10:52 ` Johannes Berg
2020-09-18 10:55 ` Johannes Berg
2020-09-21 6:03 ` Thomas Pedersen
2020-09-21 6:51 ` Johannes Berg
2020-08-31 20:55 ` [PATCH v2 16/22] mac80211: handle S1G low rates Thomas Pedersen
2020-08-31 20:55 ` [PATCH v2 17/22] mac80211: avoid rate init for S1G band Thomas Pedersen
2020-08-31 20:55 ` [PATCH v2 18/22] mac80211: receive and process S1G beacons Thomas Pedersen
2020-08-31 20:55 ` [PATCH v2 19/22] mac80211: support S1G association Thomas Pedersen
2020-08-31 20:55 ` [PATCH v2 20/22] nl80211: include frequency offset in survey info Thomas Pedersen
2020-08-31 20:55 ` [PATCH v2 21/22] mac80211_hwsim: indicate support for S1G Thomas Pedersen
2020-09-06 8:49 ` [mac80211_hwsim] 8cafe19852: hwsim.fst_ap_config_default.fail kernel test robot
2020-09-08 18:00 ` Thomas Pedersen
2020-09-08 18:41 ` Johannes Berg
2020-09-08 18:53 ` Thomas Pedersen
2020-08-31 20:56 ` [PATCH v2 22/22] mac80211_hwsim: fix TSF timestamp write to S1G beacon Thomas Pedersen
2020-09-06 16:04 ` [PATCH v2 00/22] add support for S1G association Johannes Berg
2020-09-08 18:30 ` Thomas Pedersen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200831205600.21058-2-thomas@adapt-ip.com \
--to=thomas@adapt-ip.com \
--cc=johannes@sipsolutions.net \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).