[PATCH AUTOSEL 5.12 001/116] ath11k: fix thermal temperature read

[PATCH AUTOSEL 5.12 001/116] ath11k: fix thermal temperature read

[Sasha Levin]

From: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>

[ Upstream commit e3de5bb7ac1a4cb262f8768924fd3ef6182b10bb ]

Fix dangling pointer in thermal temperature event which causes
incorrect temperature read.

Tested-on: IPQ8074 AHB WLAN.HK.2.4.0.1-00041-QCAHKSWPL_SILICONZ-1

Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210218182708.8844-1-pradeepc@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath11k/wmi.c | 53 +++++++++++----------------
 1 file changed, 21 insertions(+), 32 deletions(-)

diff --git a/drivers/net/wireless/ath/ath11k/wmi.c b/drivers/net/wireless/ath/ath11k/wmi.c
index cccfd3bd4d27..ca5cda890d58 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.c
+++ b/drivers/net/wireless/ath/ath11k/wmi.c
@@ -5417,31 +5417,6 @@ int ath11k_wmi_pull_fw_stats(struct ath11k_base *ab, struct sk_buff *skb,
 	return 0;
 }
 
-static int
-ath11k_pull_pdev_temp_ev(struct ath11k_base *ab, u8 *evt_buf,
-			 u32 len, const struct wmi_pdev_temperature_event *ev)
-{
-	const void **tb;
-	int ret;
-
-	tb = ath11k_wmi_tlv_parse_alloc(ab, evt_buf, len, GFP_ATOMIC);
-	if (IS_ERR(tb)) {
-		ret = PTR_ERR(tb);
-		ath11k_warn(ab, "failed to parse tlv: %d\n", ret);
-		return ret;
-	}
-
-	ev = tb[WMI_TAG_PDEV_TEMPERATURE_EVENT];
-	if (!ev) {
-		ath11k_warn(ab, "failed to fetch pdev temp ev");
-		kfree(tb);
-		return -EPROTO;
-	}
-
-	kfree(tb);
-	return 0;
-}
-
 size_t ath11k_wmi_fw_stats_num_vdevs(struct list_head *head)
 {
 	struct ath11k_fw_stats_vdev *i;
@@ -6849,23 +6824,37 @@ ath11k_wmi_pdev_temperature_event(struct ath11k_base *ab,
 				  struct sk_buff *skb)
 {
 	struct ath11k *ar;
-	struct wmi_pdev_temperature_event ev = {0};
+	const void **tb;
+	const struct wmi_pdev_temperature_event *ev;
+	int ret;
+
+	tb = ath11k_wmi_tlv_parse_alloc(ab, skb->data, skb->len, GFP_ATOMIC);
+	if (IS_ERR(tb)) {
+		ret = PTR_ERR(tb);
+		ath11k_warn(ab, "failed to parse tlv: %d\n", ret);
+		return;
+	}
 
-	if (ath11k_pull_pdev_temp_ev(ab, skb->data, skb->len, &ev) != 0) {
-		ath11k_warn(ab, "failed to extract pdev temperature event");
+	ev = tb[WMI_TAG_PDEV_TEMPERATURE_EVENT];
+	if (!ev) {
+		ath11k_warn(ab, "failed to fetch pdev temp ev");
+		kfree(tb);
 		return;
 	}
 
 	ath11k_dbg(ab, ATH11K_DBG_WMI,
-		   "pdev temperature ev temp %d pdev_id %d\n", ev.temp, ev.pdev_id);
+		   "pdev temperature ev temp %d pdev_id %d\n", ev->temp, ev->pdev_id);
 
-	ar = ath11k_mac_get_ar_by_pdev_id(ab, ev.pdev_id);
+	ar = ath11k_mac_get_ar_by_pdev_id(ab, ev->pdev_id);
 	if (!ar) {
-		ath11k_warn(ab, "invalid pdev id in pdev temperature ev %d", ev.pdev_id);
+		ath11k_warn(ab, "invalid pdev id in pdev temperature ev %d", ev->pdev_id);
+		kfree(tb);
 		return;
 	}
 
-	ath11k_thermal_event_temperature(ar, ev.temp);
+	ath11k_thermal_event_temperature(ar, ev->temp);
+
+	kfree(tb);
 }
 
 static void ath11k_fils_discovery_event(struct ath11k_base *ab,
-- 
2.30.2

[PATCH AUTOSEL 5.12 049/116] mac80211: Set priority and queue mapping for injected frames

[Sasha Levin]

From: Johan Almbladh <johan.almbladh@anyfinetworks.com>

[ Upstream commit 96a7109a16665255b65d021e24141c2edae0e202 ]

Some drivers, for example mt76, use the skb priority field, and
expects that to be consistent with the skb queue mapping. On some
frame injection code paths that was not true, and it broke frame
injection. Now the skb queue mapping is set according to the skb
priority value when the frame is injected. The skb priority value
is also derived from the frame data for all frame types, as it
was done prior to commit dbd50a851c50 (only allocate one queue
when using iTXQs). Fixes frame injection with the mt76 driver on
MT7610E chipset.

Signed-off-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Link: https://lore.kernel.org/r/20210401164455.978245-1-johan.almbladh@anyfinetworks.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/tx.c | 20 +++++++++-----------
 1 file changed, 9 insertions(+), 11 deletions(-)

diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index 3b3bcefbf657..28422d687096 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -2267,17 +2267,6 @@ netdev_tx_t ieee80211_monitor_start_xmit(struct sk_buff *skb,
 						    payload[7]);
 	}
 
-	/* Initialize skb->priority for QoS frames. If the DONT_REORDER flag
-	 * is set, stick to the default value for skb->priority to assure
-	 * frames injected with this flag are not reordered relative to each
-	 * other.
-	 */
-	if (ieee80211_is_data_qos(hdr->frame_control) &&
-	    !(info->control.flags & IEEE80211_TX_CTRL_DONT_REORDER)) {
-		u8 *p = ieee80211_get_qos_ctl(hdr);
-		skb->priority = *p & IEEE80211_QOS_CTL_TAG1D_MASK;
-	}
-
 	rcu_read_lock();
 
 	/*
@@ -2341,6 +2330,15 @@ netdev_tx_t ieee80211_monitor_start_xmit(struct sk_buff *skb,
 
 	info->band = chandef->chan->band;
 
+	/* Initialize skb->priority according to frame type and TID class,
+	 * with respect to the sub interface that the frame will actually
+	 * be transmitted on. If the DONT_REORDER flag is set, the original
+	 * skb-priority is preserved to assure frames injected with this
+	 * flag are not reordered relative to each other.
+	 */
+	ieee80211_select_queue_80211(sdata, skb, hdr);
+	skb_set_queue_mapping(skb, ieee80211_ac_from_tid(skb->priority));
+
 	/* remove the injection radiotap header */
 	skb_pull(skb, len_rthdr);
 
-- 
2.30.2

[PATCH AUTOSEL 5.12 050/116] mac80211: clear the beacon's CRC after channel switch

[Sasha Levin]

From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

[ Upstream commit d6843d1ee283137723b4a8c76244607ce6db1951 ]

After channel switch, we should consider any beacon with a
CSA IE as a new switch. If the CSA IE is a leftover from
before the switch that the AP forgot to remove, we'll get
a CSA-to-Self.

This caused issues in iwlwifi where the firmware saw a beacon
with a CSA-to-Self with mode = 1 on the new channel after a
switch. The firmware considered this a new switch and closed
its queues. Since the beacon didn't change between before and
after the switch, we wouldn't handle it (the CRC is the same)
and we wouldn't let the firmware open its queues again or
disconnect if the CSA IE stays for too long.

Clear the CRC valid state after we switch to make sure that
we handle the beacon and handle the CSA IE as required.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://lore.kernel.org/r/20210408143124.b9e68aa98304.I465afb55ca2c7d59f7bf610c6046a1fd732b4c28@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/mlme.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 96f487fc0071..4a8f1b8ce768 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -1295,6 +1295,11 @@ static void ieee80211_chswitch_post_beacon(struct ieee80211_sub_if_data *sdata)
 
 	sdata->vif.csa_active = false;
 	ifmgd->csa_waiting_bcn = false;
+	/*
+	 * If the CSA IE is still present on the beacon after the switch,
+	 * we need to consider it as a new CSA (possibly to self).
+	 */
+	ifmgd->beacon_crc_valid = false;
 
 	ret = drv_post_channel_switch(sdata);
 	if (ret) {
-- 
2.30.2

[PATCH AUTOSEL 5.12 055/116] rtw88: 8822c: add LC calibration for RTL8822C

[Sasha Levin]

From: Po-Hao Huang <phhuang@realtek.com>

[ Upstream commit 7ae7784ec2a812c07d2ca91a6538ef2470154fb6 ]

Fix power tracking issue by replacing unnecessary IQ calibration
with LC calibration.
When thermal difference exceeds limitation, let RF circuit adjsut
its characteristic to fit in current environment.

Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210319054218.3319-6-pkshih@realtek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/realtek/rtw88/main.h     |  2 ++
 drivers/net/wireless/realtek/rtw88/phy.c      | 14 ++++++++++
 drivers/net/wireless/realtek/rtw88/phy.h      |  1 +
 drivers/net/wireless/realtek/rtw88/reg.h      |  5 ++++
 drivers/net/wireless/realtek/rtw88/rtw8822c.c | 27 +++++++++++++++++--
 5 files changed, 47 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/realtek/rtw88/main.h b/drivers/net/wireless/realtek/rtw88/main.h
index 35afea91fd29..92b9cf1f9525 100644
--- a/drivers/net/wireless/realtek/rtw88/main.h
+++ b/drivers/net/wireless/realtek/rtw88/main.h
@@ -1166,6 +1166,7 @@ struct rtw_chip_info {
 	bool en_dis_dpd;
 	u16 dpd_ratemask;
 	u8 iqk_threshold;
+	u8 lck_threshold;
 	const struct rtw_pwr_track_tbl *pwr_track_tbl;
 
 	u8 bfer_su_max_num;
@@ -1534,6 +1535,7 @@ struct rtw_dm_info {
 	u32 rrsr_mask_min;
 	u8 thermal_avg[RTW_RF_PATH_MAX];
 	u8 thermal_meter_k;
+	u8 thermal_meter_lck;
 	s8 delta_power_index[RTW_RF_PATH_MAX];
 	s8 delta_power_index_last[RTW_RF_PATH_MAX];
 	u8 default_ofdm_index;
diff --git a/drivers/net/wireless/realtek/rtw88/phy.c b/drivers/net/wireless/realtek/rtw88/phy.c
index e114ddecac09..0211a702bb38 100644
--- a/drivers/net/wireless/realtek/rtw88/phy.c
+++ b/drivers/net/wireless/realtek/rtw88/phy.c
@@ -2219,6 +2219,20 @@ s8 rtw_phy_pwrtrack_get_pwridx(struct rtw_dev *rtwdev,
 }
 EXPORT_SYMBOL(rtw_phy_pwrtrack_get_pwridx);
 
+bool rtw_phy_pwrtrack_need_lck(struct rtw_dev *rtwdev)
+{
+	struct rtw_dm_info *dm_info = &rtwdev->dm_info;
+	u8 delta_lck;
+
+	delta_lck = abs(dm_info->thermal_avg[0] - dm_info->thermal_meter_lck);
+	if (delta_lck >= rtwdev->chip->lck_threshold) {
+		dm_info->thermal_meter_lck = dm_info->thermal_avg[0];
+		return true;
+	}
+	return false;
+}
+EXPORT_SYMBOL(rtw_phy_pwrtrack_need_lck);
+
 bool rtw_phy_pwrtrack_need_iqk(struct rtw_dev *rtwdev)
 {
 	struct rtw_dm_info *dm_info = &rtwdev->dm_info;
diff --git a/drivers/net/wireless/realtek/rtw88/phy.h b/drivers/net/wireless/realtek/rtw88/phy.h
index a4fcfb878550..a0742a69446d 100644
--- a/drivers/net/wireless/realtek/rtw88/phy.h
+++ b/drivers/net/wireless/realtek/rtw88/phy.h
@@ -55,6 +55,7 @@ u8 rtw_phy_pwrtrack_get_delta(struct rtw_dev *rtwdev, u8 path);
 s8 rtw_phy_pwrtrack_get_pwridx(struct rtw_dev *rtwdev,
 			       struct rtw_swing_table *swing_table,
 			       u8 tbl_path, u8 therm_path, u8 delta);
+bool rtw_phy_pwrtrack_need_lck(struct rtw_dev *rtwdev);
 bool rtw_phy_pwrtrack_need_iqk(struct rtw_dev *rtwdev);
 void rtw_phy_config_swing_table(struct rtw_dev *rtwdev,
 				struct rtw_swing_table *swing_table);
diff --git a/drivers/net/wireless/realtek/rtw88/reg.h b/drivers/net/wireless/realtek/rtw88/reg.h
index ea518aa78552..819af34dac34 100644
--- a/drivers/net/wireless/realtek/rtw88/reg.h
+++ b/drivers/net/wireless/realtek/rtw88/reg.h
@@ -652,8 +652,13 @@
 #define RF_TXATANK	0x64
 #define RF_TRXIQ	0x66
 #define RF_RXIQGEN	0x8d
+#define RF_SYN_PFD	0xb0
 #define RF_XTALX2	0xb8
+#define RF_SYN_CTRL	0xbb
 #define RF_MALSEL	0xbe
+#define RF_SYN_AAC	0xc9
+#define RF_AAC_CTRL	0xca
+#define RF_FAST_LCK	0xcc
 #define RF_RCKD		0xde
 #define RF_TXADBG	0xde
 #define RF_LUTDBG	0xdf
diff --git a/drivers/net/wireless/realtek/rtw88/rtw8822c.c b/drivers/net/wireless/realtek/rtw88/rtw8822c.c
index dd560c28abb2..448922cb2e63 100644
--- a/drivers/net/wireless/realtek/rtw88/rtw8822c.c
+++ b/drivers/net/wireless/realtek/rtw88/rtw8822c.c
@@ -1126,6 +1126,7 @@ static void rtw8822c_pwrtrack_init(struct rtw_dev *rtwdev)
 
 	dm_info->pwr_trk_triggered = false;
 	dm_info->thermal_meter_k = rtwdev->efuse.thermal_meter_k;
+	dm_info->thermal_meter_lck = rtwdev->efuse.thermal_meter_k;
 }
 
 static void rtw8822c_phy_set_param(struct rtw_dev *rtwdev)
@@ -2108,6 +2109,26 @@ static void rtw8822c_false_alarm_statistics(struct rtw_dev *rtwdev)
 	rtw_write32_set(rtwdev, REG_RX_BREAK, BIT_COM_RX_GCK_EN);
 }
 
+static void rtw8822c_do_lck(struct rtw_dev *rtwdev)
+{
+	u32 val;
+
+	rtw_write_rf(rtwdev, RF_PATH_A, RF_SYN_CTRL, RFREG_MASK, 0x80010);
+	rtw_write_rf(rtwdev, RF_PATH_A, RF_SYN_PFD, RFREG_MASK, 0x1F0FA);
+	fsleep(1);
+	rtw_write_rf(rtwdev, RF_PATH_A, RF_AAC_CTRL, RFREG_MASK, 0x80000);
+	rtw_write_rf(rtwdev, RF_PATH_A, RF_SYN_AAC, RFREG_MASK, 0x80001);
+	read_poll_timeout(rtw_read_rf, val, val != 0x1, 1000, 100000,
+			  true, rtwdev, RF_PATH_A, RF_AAC_CTRL, 0x1000);
+	rtw_write_rf(rtwdev, RF_PATH_A, RF_SYN_PFD, RFREG_MASK, 0x1F0F8);
+	rtw_write_rf(rtwdev, RF_PATH_B, RF_SYN_CTRL, RFREG_MASK, 0x80010);
+
+	rtw_write_rf(rtwdev, RF_PATH_A, RF_FAST_LCK, RFREG_MASK, 0x0f000);
+	rtw_write_rf(rtwdev, RF_PATH_A, RF_FAST_LCK, RFREG_MASK, 0x4f000);
+	fsleep(1);
+	rtw_write_rf(rtwdev, RF_PATH_A, RF_FAST_LCK, RFREG_MASK, 0x0f000);
+}
+
 static void rtw8822c_do_iqk(struct rtw_dev *rtwdev)
 {
 	struct rtw_iqk_para para = {0};
@@ -3538,11 +3559,12 @@ static void __rtw8822c_pwr_track(struct rtw_dev *rtwdev)
 
 	rtw_phy_config_swing_table(rtwdev, &swing_table);
 
+	if (rtw_phy_pwrtrack_need_lck(rtwdev))
+		rtw8822c_do_lck(rtwdev);
+
 	for (i = 0; i < rtwdev->hal.rf_path_num; i++)
 		rtw8822c_pwr_track_path(rtwdev, &swing_table, i);
 
-	if (rtw_phy_pwrtrack_need_iqk(rtwdev))
-		rtw8822c_do_iqk(rtwdev);
 }
 
 static void rtw8822c_pwr_track(struct rtw_dev *rtwdev)
@@ -4351,6 +4373,7 @@ struct rtw_chip_info rtw8822c_hw_spec = {
 	.dpd_ratemask = DIS_DPD_RATEALL,
 	.pwr_track_tbl = &rtw8822c_rtw_pwr_track_tbl,
 	.iqk_threshold = 8,
+	.lck_threshold = 8,
 	.bfer_su_max_num = 2,
 	.bfer_mu_max_num = 1,
 	.rx_ldpc = true,
-- 
2.30.2

[PATCH AUTOSEL 5.12 056/116] mt76: mt7615: fix key set/delete issues

[Sasha Levin]

From: Felix Fietkau <nbd@nbd.name>

[ Upstream commit 730d6d0da8d8f5905faafe645a5b3c08ac3f5a8f ]

There were multiple issues in the current key set/remove code:
- deleting a key with the previous key index deletes the current key
- BIP key would only be uploaded correctly initially and corrupted on rekey

Rework the code to better keep track of multiple keys and check for the
key index before deleting the current key

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt76/mt76.h     |  1 +
 .../net/wireless/mediatek/mt76/mt7615/mac.c   | 97 ++++++++++---------
 .../net/wireless/mediatek/mt76/mt7615/main.c  | 18 ++--
 3 files changed, 65 insertions(+), 51 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt76.h b/drivers/net/wireless/mediatek/mt76/mt76.h
index 8bf45497cfca..36a430f09f64 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76.h
+++ b/drivers/net/wireless/mediatek/mt76/mt76.h
@@ -222,6 +222,7 @@ struct mt76_wcid {
 
 	u16 idx;
 	u8 hw_key_idx;
+	u8 hw_key_idx2;
 
 	u8 sta:1;
 	u8 ext_phy:1;
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
index 59fdd0fc2ad4..72bdc6579763 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
@@ -1033,7 +1033,7 @@ EXPORT_SYMBOL_GPL(mt7615_mac_set_rates);
 static int
 mt7615_mac_wtbl_update_key(struct mt7615_dev *dev, struct mt76_wcid *wcid,
 			   struct ieee80211_key_conf *key,
-			   enum mt7615_cipher_type cipher,
+			   enum mt7615_cipher_type cipher, u16 cipher_mask,
 			   enum set_key_cmd cmd)
 {
 	u32 addr = mt7615_mac_wtbl_addr(dev, wcid->idx) + 30 * 4;
@@ -1050,22 +1050,22 @@ mt7615_mac_wtbl_update_key(struct mt7615_dev *dev, struct mt76_wcid *wcid,
 			memcpy(data + 16, key->key + 24, 8);
 			memcpy(data + 24, key->key + 16, 8);
 		} else {
-			if (cipher != MT_CIPHER_BIP_CMAC_128 && wcid->cipher)
-				memmove(data + 16, data, 16);
-			if (cipher != MT_CIPHER_BIP_CMAC_128 || !wcid->cipher)
+			if (cipher_mask == BIT(cipher))
 				memcpy(data, key->key, key->keylen);
-			else if (cipher == MT_CIPHER_BIP_CMAC_128)
+			else if (cipher != MT_CIPHER_BIP_CMAC_128)
+				memcpy(data, key->key, 16);
+			if (cipher == MT_CIPHER_BIP_CMAC_128)
 				memcpy(data + 16, key->key, 16);
 		}
 	} else {
-		if (wcid->cipher & ~BIT(cipher)) {
-			if (cipher != MT_CIPHER_BIP_CMAC_128)
-				memmove(data, data + 16, 16);
+		if (cipher == MT_CIPHER_BIP_CMAC_128)
 			memset(data + 16, 0, 16);
-		} else {
+		else if (cipher_mask)
+			memset(data, 0, 16);
+		if (!cipher_mask)
 			memset(data, 0, sizeof(data));
-		}
 	}
+
 	mt76_wr_copy(dev, addr, data, sizeof(data));
 
 	return 0;
@@ -1073,7 +1073,7 @@ mt7615_mac_wtbl_update_key(struct mt7615_dev *dev, struct mt76_wcid *wcid,
 
 static int
 mt7615_mac_wtbl_update_pk(struct mt7615_dev *dev, struct mt76_wcid *wcid,
-			  enum mt7615_cipher_type cipher,
+			  enum mt7615_cipher_type cipher, u16 cipher_mask,
 			  int keyidx, enum set_key_cmd cmd)
 {
 	u32 addr = mt7615_mac_wtbl_addr(dev, wcid->idx), w0, w1;
@@ -1083,20 +1083,23 @@ mt7615_mac_wtbl_update_pk(struct mt7615_dev *dev, struct mt76_wcid *wcid,
 
 	w0 = mt76_rr(dev, addr);
 	w1 = mt76_rr(dev, addr + 4);
-	if (cmd == SET_KEY) {
-		w0 |= MT_WTBL_W0_RX_KEY_VALID |
-		      FIELD_PREP(MT_WTBL_W0_RX_IK_VALID,
-				 cipher == MT_CIPHER_BIP_CMAC_128);
-		if (cipher != MT_CIPHER_BIP_CMAC_128 ||
-		    !wcid->cipher)
-			w0 |= FIELD_PREP(MT_WTBL_W0_KEY_IDX, keyidx);
-	}  else {
-		if (!(wcid->cipher & ~BIT(cipher)))
-			w0 &= ~(MT_WTBL_W0_RX_KEY_VALID |
-				MT_WTBL_W0_KEY_IDX);
-		if (cipher == MT_CIPHER_BIP_CMAC_128)
-			w0 &= ~MT_WTBL_W0_RX_IK_VALID;
+
+	if (cipher_mask)
+		w0 |= MT_WTBL_W0_RX_KEY_VALID;
+	else
+		w0 &= ~(MT_WTBL_W0_RX_KEY_VALID | MT_WTBL_W0_KEY_IDX);
+	if (cipher_mask & BIT(MT_CIPHER_BIP_CMAC_128))
+		w0 |= MT_WTBL_W0_RX_IK_VALID;
+	else
+		w0 &= ~MT_WTBL_W0_RX_IK_VALID;
+
+	if (cmd == SET_KEY &&
+	    (cipher != MT_CIPHER_BIP_CMAC_128 ||
+	     cipher_mask == BIT(cipher))) {
+		w0 &= ~MT_WTBL_W0_KEY_IDX;
+		w0 |= FIELD_PREP(MT_WTBL_W0_KEY_IDX, keyidx);
 	}
+
 	mt76_wr(dev, MT_WTBL_RICR0, w0);
 	mt76_wr(dev, MT_WTBL_RICR1, w1);
 
@@ -1109,24 +1112,25 @@ mt7615_mac_wtbl_update_pk(struct mt7615_dev *dev, struct mt76_wcid *wcid,
 
 static void
 mt7615_mac_wtbl_update_cipher(struct mt7615_dev *dev, struct mt76_wcid *wcid,
-			      enum mt7615_cipher_type cipher,
+			      enum mt7615_cipher_type cipher, u16 cipher_mask,
 			      enum set_key_cmd cmd)
 {
 	u32 addr = mt7615_mac_wtbl_addr(dev, wcid->idx);
 
-	if (cmd == SET_KEY) {
-		if (cipher != MT_CIPHER_BIP_CMAC_128 || !wcid->cipher)
-			mt76_rmw(dev, addr + 2 * 4, MT_WTBL_W2_KEY_TYPE,
-				 FIELD_PREP(MT_WTBL_W2_KEY_TYPE, cipher));
-	} else {
-		if (cipher != MT_CIPHER_BIP_CMAC_128 &&
-		    wcid->cipher & BIT(MT_CIPHER_BIP_CMAC_128))
-			mt76_rmw(dev, addr + 2 * 4, MT_WTBL_W2_KEY_TYPE,
-				 FIELD_PREP(MT_WTBL_W2_KEY_TYPE,
-					    MT_CIPHER_BIP_CMAC_128));
-		else if (!(wcid->cipher & ~BIT(cipher)))
-			mt76_clear(dev, addr + 2 * 4, MT_WTBL_W2_KEY_TYPE);
+	if (!cipher_mask) {
+		mt76_clear(dev, addr + 2 * 4, MT_WTBL_W2_KEY_TYPE);
+		return;
 	}
+
+	if (cmd != SET_KEY)
+		return;
+
+	if (cipher == MT_CIPHER_BIP_CMAC_128 &&
+	    cipher_mask & ~BIT(MT_CIPHER_BIP_CMAC_128))
+		return;
+
+	mt76_rmw(dev, addr + 2 * 4, MT_WTBL_W2_KEY_TYPE,
+		 FIELD_PREP(MT_WTBL_W2_KEY_TYPE, cipher));
 }
 
 int __mt7615_mac_wtbl_set_key(struct mt7615_dev *dev,
@@ -1135,25 +1139,30 @@ int __mt7615_mac_wtbl_set_key(struct mt7615_dev *dev,
 			      enum set_key_cmd cmd)
 {
 	enum mt7615_cipher_type cipher;
+	u16 cipher_mask = wcid->cipher;
 	int err;
 
 	cipher = mt7615_mac_get_cipher(key->cipher);
 	if (cipher == MT_CIPHER_NONE)
 		return -EOPNOTSUPP;
 
-	mt7615_mac_wtbl_update_cipher(dev, wcid, cipher, cmd);
-	err = mt7615_mac_wtbl_update_key(dev, wcid, key, cipher, cmd);
+	if (cmd == SET_KEY)
+		cipher_mask |= BIT(cipher);
+	else
+		cipher_mask &= ~BIT(cipher);
+
+	mt7615_mac_wtbl_update_cipher(dev, wcid, cipher, cipher_mask, cmd);
+	err = mt7615_mac_wtbl_update_key(dev, wcid, key, cipher, cipher_mask,
+					 cmd);
 	if (err < 0)
 		return err;
 
-	err = mt7615_mac_wtbl_update_pk(dev, wcid, cipher, key->keyidx, cmd);
+	err = mt7615_mac_wtbl_update_pk(dev, wcid, cipher, cipher_mask,
+					key->keyidx, cmd);
 	if (err < 0)
 		return err;
 
-	if (cmd == SET_KEY)
-		wcid->cipher |= BIT(cipher);
-	else
-		wcid->cipher &= ~BIT(cipher);
+	wcid->cipher = cipher_mask;
 
 	return 0;
 }
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/main.c b/drivers/net/wireless/mediatek/mt76/mt7615/main.c
index 25faf486d279..1aa6928f88fc 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/main.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/main.c
@@ -337,7 +337,8 @@ static int mt7615_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 	struct mt7615_sta *msta = sta ? (struct mt7615_sta *)sta->drv_priv :
 				  &mvif->sta;
 	struct mt76_wcid *wcid = &msta->wcid;
-	int idx = key->keyidx, err;
+	int idx = key->keyidx, err = 0;
+	u8 *wcid_keyidx = &wcid->hw_key_idx;
 
 	/* The hardware does not support per-STA RX GTK, fallback
 	 * to software mode for these.
@@ -352,6 +353,7 @@ static int mt7615_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 	/* fall back to sw encryption for unsupported ciphers */
 	switch (key->cipher) {
 	case WLAN_CIPHER_SUITE_AES_CMAC:
+		wcid_keyidx = &wcid->hw_key_idx2;
 		key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIE;
 		break;
 	case WLAN_CIPHER_SUITE_TKIP:
@@ -369,12 +371,13 @@ static int mt7615_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 
 	mt7615_mutex_acquire(dev);
 
-	if (cmd == SET_KEY) {
-		key->hw_key_idx = wcid->idx;
-		wcid->hw_key_idx = idx;
-	} else if (idx == wcid->hw_key_idx) {
-		wcid->hw_key_idx = -1;
-	}
+	if (cmd == SET_KEY)
+		*wcid_keyidx = idx;
+	else if (idx == *wcid_keyidx)
+		*wcid_keyidx = -1;
+	else
+		goto out;
+
 	mt76_wcid_key_setup(&dev->mt76, wcid,
 			    cmd == SET_KEY ? key : NULL);
 
@@ -383,6 +386,7 @@ static int mt7615_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 	else
 		err = __mt7615_mac_wtbl_set_key(dev, wcid, key, cmd);
 
+out:
 	mt7615_mutex_release(dev);
 
 	return err;
-- 
2.30.2

[PATCH AUTOSEL 5.12 057/116] mt76: mt7615: support loading EEPROM for MT7613BE

[Sasha Levin]

From: Sander Vanheule <sander@svanheule.net>

[ Upstream commit 858ebf446bee7d5077bd99488aae617908c3f4fe ]

EEPROM blobs for MT7613BE radios start with (little endian) 0x7663,
which is also the PCI device ID for this device. The EEPROM is required
for the radio to work at useful power levels, otherwise only the lowest
power level is available.

Suggested-by: Georgi Vlaev <georgi.vlaev@konsulko.com>
Tested-by: Stijn Segers <foss@volatilesystems.org>
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt76/mt7615/eeprom.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/eeprom.c b/drivers/net/wireless/mediatek/mt76/mt7615/eeprom.c
index 2eab23898c77..6dbaaf95ee38 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/eeprom.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/eeprom.c
@@ -86,6 +86,7 @@ static int mt7615_check_eeprom(struct mt76_dev *dev)
 	switch (val) {
 	case 0x7615:
 	case 0x7622:
+	case 0x7663:
 		return 0;
 	default:
 		return -EINVAL;
-- 
2.30.2

[PATCH AUTOSEL 5.12 058/116] mt76: mt76x0: disable GTK offloading

[Sasha Levin]

From: David Bauer <mail@david-bauer.net>

[ Upstream commit 4b36cc6b390f18dbc59a45fb4141f90d7dfe2b23 ]

When operating two VAP on a MT7610 with encryption (PSK2, SAE, OWE),
only the first one to be created will transmit properly encrypteded
frames.

All subsequently created VAPs will sent out frames with the payload left
unencrypted, breaking multicast traffic (ICMP6 NDP) and potentially
disclosing information to a third party.

Disable GTK offloading and encrypt these frames in software to
circumvent this issue. THis only seems to be necessary on MT7610 chips,
as MT7612 is not affected from our testing.

Signed-off-by: David Bauer <mail@david-bauer.net>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt76/mt76x02_util.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/net/wireless/mediatek/mt76/mt76x02_util.c b/drivers/net/wireless/mediatek/mt76/mt76x02_util.c
index ab671e21f882..02db5d66735d 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76x02_util.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76x02_util.c
@@ -447,6 +447,10 @@ int mt76x02_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 	    !(key->flags & IEEE80211_KEY_FLAG_PAIRWISE))
 		return -EOPNOTSUPP;
 
+	/* MT76x0 GTK offloading does not work with more than one VIF */
+	if (is_mt76x0(dev) && !(key->flags & IEEE80211_KEY_FLAG_PAIRWISE))
+		return -EOPNOTSUPP;
+
 	msta = sta ? (struct mt76x02_sta *)sta->drv_priv : NULL;
 	wcid = msta ? &msta->wcid : &mvif->group_wcid;
 
-- 
2.30.2

[PATCH AUTOSEL 5.12 059/116] mt76: connac: always check return value from mt76_connac_mcu_alloc_wtbl_req

[Sasha Levin]

From: Lorenzo Bianconi <lorenzo@kernel.org>

[ Upstream commit baa3afb39e94965f4ca5b5d3d274379504b8fa24 ]

Even if this is not a real bug since mt76_connac_mcu_alloc_wtbl_req routine
can fails just if nskb is NULL , always check return value from
mt76_connac_mcu_alloc_wtbl_req in order to avoid possible future
mistake.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt76/mt7615/mcu.c      | 3 +++
 drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c | 3 +++
 2 files changed, 6 insertions(+)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c
index 631596fc2f36..4ecbd5406e2a 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c
@@ -1040,6 +1040,9 @@ mt7615_mcu_sta_ba(struct mt7615_dev *dev,
 
 	wtbl_hdr = mt76_connac_mcu_alloc_wtbl_req(&dev->mt76, &msta->wcid,
 						  WTBL_SET, sta_wtbl, &skb);
+	if (IS_ERR(wtbl_hdr))
+		return PTR_ERR(wtbl_hdr);
+
 	mt76_connac_mcu_wtbl_ba_tlv(&dev->mt76, skb, params, enable, tx,
 				    sta_wtbl, wtbl_hdr);
 
diff --git a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c
index 6cbccfb05f8b..cd92ff915da5 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c
@@ -833,6 +833,9 @@ int mt76_connac_mcu_add_sta_cmd(struct mt76_phy *phy,
 	wtbl_hdr = mt76_connac_mcu_alloc_wtbl_req(dev, wcid,
 						  WTBL_RESET_AND_SET,
 						  sta_wtbl, &skb);
+	if (IS_ERR(wtbl_hdr))
+		return PTR_ERR(wtbl_hdr);
+
 	if (enable) {
 		mt76_connac_mcu_wtbl_generic_tlv(dev, skb, vif, sta, sta_wtbl,
 						 wtbl_hdr);
-- 
2.30.2

[PATCH AUTOSEL 5.12 060/116] mt76: mt7915: always check return value from mt7915_mcu_alloc_wtbl_req

[Sasha Levin]

From: Lorenzo Bianconi <lorenzo@kernel.org>

[ Upstream commit 45f93e368211fbbd247e1ece254ffb121e20fa10 ]

As done for mt76_connac_mcu_alloc_wtbl_req, even if this is not a real
bug since mt7915_mcu_alloc_wtbl_req routine can fails just if nskb is NULL,
always check return value from mt7915_mcu_alloc_wtbl_req in order to avoid
possible future mistake.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt76/mt7915/mcu.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
index 195929242b72..12281e4cf817 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
@@ -1188,6 +1188,9 @@ mt7915_mcu_sta_ba(struct mt7915_dev *dev,
 
 	wtbl_hdr = mt7915_mcu_alloc_wtbl_req(dev, msta, WTBL_SET, sta_wtbl,
 					     &skb);
+	if (IS_ERR(wtbl_hdr))
+		return PTR_ERR(wtbl_hdr);
+
 	mt7915_mcu_wtbl_ba_tlv(skb, params, enable, tx, sta_wtbl, wtbl_hdr);
 
 	ret = mt76_mcu_skb_send_msg(&dev->mt76, skb,
@@ -1704,6 +1707,9 @@ int mt7915_mcu_sta_update_hdr_trans(struct mt7915_dev *dev,
 		return -ENOMEM;
 
 	wtbl_hdr = mt7915_mcu_alloc_wtbl_req(dev, msta, WTBL_SET, NULL, &skb);
+	if (IS_ERR(wtbl_hdr))
+		return PTR_ERR(wtbl_hdr);
+
 	mt7915_mcu_wtbl_hdr_trans_tlv(skb, vif, sta, NULL, wtbl_hdr);
 
 	return mt76_mcu_skb_send_msg(&dev->mt76, skb, MCU_EXT_CMD(WTBL_UPDATE),
@@ -1728,6 +1734,9 @@ int mt7915_mcu_add_smps(struct mt7915_dev *dev, struct ieee80211_vif *vif,
 
 	wtbl_hdr = mt7915_mcu_alloc_wtbl_req(dev, msta, WTBL_SET, sta_wtbl,
 					     &skb);
+	if (IS_ERR(wtbl_hdr))
+		return PTR_ERR(wtbl_hdr);
+
 	mt7915_mcu_wtbl_smps_tlv(skb, sta, sta_wtbl, wtbl_hdr);
 
 	return mt76_mcu_skb_send_msg(&dev->mt76, skb,
@@ -2253,6 +2262,9 @@ int mt7915_mcu_add_sta(struct mt7915_dev *dev, struct ieee80211_vif *vif,
 
 	wtbl_hdr = mt7915_mcu_alloc_wtbl_req(dev, msta, WTBL_RESET_AND_SET,
 					     sta_wtbl, &skb);
+	if (IS_ERR(wtbl_hdr))
+		return PTR_ERR(wtbl_hdr);
+
 	if (enable) {
 		mt7915_mcu_wtbl_generic_tlv(skb, vif, sta, sta_wtbl, wtbl_hdr);
 		mt7915_mcu_wtbl_hdr_trans_tlv(skb, vif, sta, sta_wtbl, wtbl_hdr);
-- 
2.30.2

[PATCH AUTOSEL 5.12 061/116] mt76: mt7915: fix key set/delete issue

[Sasha Levin]

From: Felix Fietkau <nbd@nbd.name>

[ Upstream commit 1da4fd48d28436f8b690cdc2879603dede6d8355 ]

Deleting a key with the previous key index deletes the current key
Rework the code to better keep track of multiple keys and check for the
key index before deleting the current key

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/wireless/mediatek/mt76/mt7915/main.c  | 25 +++++++++++++------
 1 file changed, 18 insertions(+), 7 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/main.c b/drivers/net/wireless/mediatek/mt76/mt7915/main.c
index d4969b2e1ffb..33590ff6e281 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/main.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/main.c
@@ -317,7 +317,9 @@ static int mt7915_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 	struct mt7915_sta *msta = sta ? (struct mt7915_sta *)sta->drv_priv :
 				  &mvif->sta;
 	struct mt76_wcid *wcid = &msta->wcid;
+	u8 *wcid_keyidx = &wcid->hw_key_idx;
 	int idx = key->keyidx;
+	int err = 0;
 
 	/* The hardware does not support per-STA RX GTK, fallback
 	 * to software mode for these.
@@ -332,6 +334,7 @@ static int mt7915_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 	/* fall back to sw encryption for unsupported ciphers */
 	switch (key->cipher) {
 	case WLAN_CIPHER_SUITE_AES_CMAC:
+		wcid_keyidx = &wcid->hw_key_idx2;
 		key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIE;
 		break;
 	case WLAN_CIPHER_SUITE_TKIP:
@@ -347,16 +350,24 @@ static int mt7915_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 		return -EOPNOTSUPP;
 	}
 
-	if (cmd == SET_KEY) {
-		key->hw_key_idx = wcid->idx;
-		wcid->hw_key_idx = idx;
-	} else if (idx == wcid->hw_key_idx) {
-		wcid->hw_key_idx = -1;
-	}
+	mutex_lock(&dev->mt76.mutex);
+
+	if (cmd == SET_KEY)
+		*wcid_keyidx = idx;
+	else if (idx == *wcid_keyidx)
+		*wcid_keyidx = -1;
+	else
+		goto out;
+
 	mt76_wcid_key_setup(&dev->mt76, wcid,
 			    cmd == SET_KEY ? key : NULL);
 
-	return mt7915_mcu_add_key(dev, vif, msta, key, cmd);
+	err = mt7915_mcu_add_key(dev, vif, msta, key, cmd);
+
+out:
+	mutex_unlock(&dev->mt76.mutex);
+
+	return err;
 }
 
 static int mt7915_config(struct ieee80211_hw *hw, u32 changed)
-- 
2.30.2

[PATCH AUTOSEL 5.12 062/116] mt76: mt7915: fix txpower init for TSSI off chips

[Sasha Levin]

From: Shayne Chen <shayne.chen@mediatek.com>

[ Upstream commit a226ccd04c479ccd23d6927c64bad1b441707f70 ]

Fix incorrect txpower init value for TSSI off chips which causes
too small txpower.

Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../wireless/mediatek/mt76/mt7915/eeprom.c    | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/eeprom.c b/drivers/net/wireless/mediatek/mt76/mt7915/eeprom.c
index 660398ac53c2..738ecf8f4fa2 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/eeprom.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/eeprom.c
@@ -124,7 +124,7 @@ int mt7915_eeprom_get_target_power(struct mt7915_dev *dev,
 				   struct ieee80211_channel *chan,
 				   u8 chain_idx)
 {
-	int index;
+	int index, target_power;
 	bool tssi_on;
 
 	if (chain_idx > 3)
@@ -133,15 +133,22 @@ int mt7915_eeprom_get_target_power(struct mt7915_dev *dev,
 	tssi_on = mt7915_tssi_enabled(dev, chan->band);
 
 	if (chan->band == NL80211_BAND_2GHZ) {
-		index = MT_EE_TX0_POWER_2G + chain_idx * 3 + !tssi_on;
+		index = MT_EE_TX0_POWER_2G + chain_idx * 3;
+		target_power = mt7915_eeprom_read(dev, index);
+
+		if (!tssi_on)
+			target_power += mt7915_eeprom_read(dev, index + 1);
 	} else {
-		int group = tssi_on ?
-			    mt7915_get_channel_group(chan->hw_value) : 8;
+		int group = mt7915_get_channel_group(chan->hw_value);
+
+		index = MT_EE_TX0_POWER_5G + chain_idx * 12;
+		target_power = mt7915_eeprom_read(dev, index + group);
 
-		index = MT_EE_TX0_POWER_5G + chain_idx * 12 + group;
+		if (!tssi_on)
+			target_power += mt7915_eeprom_read(dev, index + 8);
 	}
 
-	return mt7915_eeprom_read(dev, index);
+	return target_power;
 }
 
 static const u8 sku_cck_delta_map[] = {
-- 
2.30.2

[PATCH AUTOSEL 5.12 063/116] mt76: mt7921: fix key set/delete issue

[Sasha Levin]

From: Lorenzo Bianconi <lorenzo@kernel.org>

[ Upstream commit 60468f7fd7072c804b2613f1cadabace8d77d311 ]

Similar to the mt7915 driver, deleting a key with the previous key index
deletes the current key. Rework the code to better keep track of
multiple keys and check for the key index before deleting the current
key

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/wireless/mediatek/mt76/mt7921/main.c  | 25 +++++++++++++------
 1 file changed, 17 insertions(+), 8 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/main.c b/drivers/net/wireless/mediatek/mt76/mt7921/main.c
index 729f6c42cdde..672192e53269 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7921/main.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7921/main.c
@@ -413,7 +413,8 @@ static int mt7921_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 	struct mt7921_sta *msta = sta ? (struct mt7921_sta *)sta->drv_priv :
 				  &mvif->sta;
 	struct mt76_wcid *wcid = &msta->wcid;
-	int idx = key->keyidx;
+	u8 *wcid_keyidx = &wcid->hw_key_idx;
+	int idx = key->keyidx, err = 0;
 
 	/* The hardware does not support per-STA RX GTK, fallback
 	 * to software mode for these.
@@ -429,6 +430,7 @@ static int mt7921_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 	switch (key->cipher) {
 	case WLAN_CIPHER_SUITE_AES_CMAC:
 		key->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIE;
+		wcid_keyidx = &wcid->hw_key_idx2;
 		break;
 	case WLAN_CIPHER_SUITE_TKIP:
 	case WLAN_CIPHER_SUITE_CCMP:
@@ -443,16 +445,23 @@ static int mt7921_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 		return -EOPNOTSUPP;
 	}
 
-	if (cmd == SET_KEY) {
-		key->hw_key_idx = wcid->idx;
-		wcid->hw_key_idx = idx;
-	} else if (idx == wcid->hw_key_idx) {
-		wcid->hw_key_idx = -1;
-	}
+	mt7921_mutex_acquire(dev);
+
+	if (cmd == SET_KEY)
+		*wcid_keyidx = idx;
+	else if (idx == *wcid_keyidx)
+		*wcid_keyidx = -1;
+	else
+		goto out;
+
 	mt76_wcid_key_setup(&dev->mt76, wcid,
 			    cmd == SET_KEY ? key : NULL);
 
-	return mt7921_mcu_add_key(dev, vif, msta, key, cmd);
+	err = mt7921_mcu_add_key(dev, vif, msta, key, cmd);
+out:
+	mt7921_mutex_release(dev);
+
+	return err;
 }
 
 static int mt7921_config(struct ieee80211_hw *hw, u32 changed)
-- 
2.30.2

[PATCH AUTOSEL 5.12 064/116] mt76: mt7915: add wifi subsystem reset

[Sasha Levin]

From: Ryder Lee <ryder.lee@mediatek.com>

[ Upstream commit e07419a7dca97dd9bddfe5d099380857c19535f3 ]

Reset wifi subsystem when MCU is already running.
Fixes firmware download failure after soft reboot on systems where the PCIe
reset could not be performed properly.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Co-developed-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/wireless/mediatek/mt76/mt7915/init.c  | 58 ++++++++++++++++++-
 .../net/wireless/mediatek/mt76/mt7915/mcu.c   | 15 +----
 .../net/wireless/mediatek/mt76/mt7915/regs.h  | 13 +++++
 3 files changed, 70 insertions(+), 16 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/init.c b/drivers/net/wireless/mediatek/mt76/mt7915/init.c
index ad4e5b95158b..16ad53316c38 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/init.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/init.c
@@ -4,6 +4,7 @@
 #include <linux/etherdevice.h>
 #include "mt7915.h"
 #include "mac.h"
+#include "mcu.h"
 #include "eeprom.h"
 
 #define CCK_RATE(_idx, _rate) {						\
@@ -283,9 +284,50 @@ static void mt7915_init_work(struct work_struct *work)
 	mt7915_register_ext_phy(dev);
 }
 
+static void mt7915_wfsys_reset(struct mt7915_dev *dev)
+{
+	u32 val = MT_TOP_PWR_KEY | MT_TOP_PWR_SW_PWR_ON | MT_TOP_PWR_PWR_ON;
+	u32 reg = mt7915_reg_map_l1(dev, MT_TOP_MISC);
+
+#define MT_MCU_DUMMY_RANDOM	GENMASK(15, 0)
+#define MT_MCU_DUMMY_DEFAULT	GENMASK(31, 16)
+
+	mt76_wr(dev, MT_MCU_WFDMA0_DUMMY_CR, MT_MCU_DUMMY_RANDOM);
+
+	/* change to software control */
+	val |= MT_TOP_PWR_SW_RST;
+	mt76_wr(dev, MT_TOP_PWR_CTRL, val);
+
+	/* reset wfsys */
+	val &= ~MT_TOP_PWR_SW_RST;
+	mt76_wr(dev, MT_TOP_PWR_CTRL, val);
+
+	/* release wfsys then mcu re-excutes romcode */
+	val |= MT_TOP_PWR_SW_RST;
+	mt76_wr(dev, MT_TOP_PWR_CTRL, val);
+
+	/* switch to hw control */
+	val &= ~MT_TOP_PWR_SW_RST;
+	val |= MT_TOP_PWR_HW_CTRL;
+	mt76_wr(dev, MT_TOP_PWR_CTRL, val);
+
+	/* check whether mcu resets to default */
+	if (!mt76_poll_msec(dev, MT_MCU_WFDMA0_DUMMY_CR, MT_MCU_DUMMY_DEFAULT,
+			    MT_MCU_DUMMY_DEFAULT, 1000)) {
+		dev_err(dev->mt76.dev, "wifi subsystem reset failure\n");
+		return;
+	}
+
+	/* wfsys reset won't clear host registers */
+	mt76_clear(dev, reg, MT_TOP_MISC_FW_STATE);
+
+	msleep(100);
+}
+
 static int mt7915_init_hardware(struct mt7915_dev *dev)
 {
 	int ret, idx;
+	u32 val;
 
 	mt76_wr(dev, MT_INT_SOURCE_CSR, ~0);
 
@@ -295,6 +337,12 @@ static int mt7915_init_hardware(struct mt7915_dev *dev)
 
 	dev->dbdc_support = !!(mt7915_l1_rr(dev, MT_HW_BOUND) & BIT(5));
 
+	val = mt76_rr(dev, mt7915_reg_map_l1(dev, MT_TOP_MISC));
+
+	/* If MCU was already running, it is likely in a bad state */
+	if (FIELD_GET(MT_TOP_MISC_FW_STATE, val) > FW_STATE_FW_DOWNLOAD)
+		mt7915_wfsys_reset(dev);
+
 	ret = mt7915_dma_init(dev);
 	if (ret)
 		return ret;
@@ -308,8 +356,14 @@ static int mt7915_init_hardware(struct mt7915_dev *dev)
 	mt76_wr(dev, MT_SWDEF_MODE, MT_SWDEF_NORMAL_MODE);
 
 	ret = mt7915_mcu_init(dev);
-	if (ret)
-		return ret;
+	if (ret) {
+		/* Reset and try again */
+		mt7915_wfsys_reset(dev);
+
+		ret = mt7915_mcu_init(dev);
+		if (ret)
+			return ret;
+	}
 
 	ret = mt7915_eeprom_init(dev);
 	if (ret < 0)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
index 12281e4cf817..f5431e4bd8de 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
@@ -2754,21 +2754,8 @@ static int mt7915_load_ram(struct mt7915_dev *dev)
 
 static int mt7915_load_firmware(struct mt7915_dev *dev)
 {
+	u32 reg = mt7915_reg_map_l1(dev, MT_TOP_MISC);
 	int ret;
-	u32 val, reg = mt7915_reg_map_l1(dev, MT_TOP_MISC);
-
-	val = FIELD_PREP(MT_TOP_MISC_FW_STATE, FW_STATE_FW_DOWNLOAD);
-
-	if (!mt76_poll_msec(dev, reg, MT_TOP_MISC_FW_STATE, val, 1000)) {
-		/* restart firmware once */
-		__mt76_mcu_restart(&dev->mt76);
-		if (!mt76_poll_msec(dev, reg, MT_TOP_MISC_FW_STATE,
-				    val, 1000)) {
-			dev_err(dev->mt76.dev,
-				"Firmware is not ready for download\n");
-			return -EIO;
-		}
-	}
 
 	ret = mt7915_load_patch(dev);
 	if (ret)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/regs.h b/drivers/net/wireless/mediatek/mt76/mt7915/regs.h
index ed0c9a24bb53..dfb8880657bf 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/regs.h
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/regs.h
@@ -4,6 +4,11 @@
 #ifndef __MT7915_REGS_H
 #define __MT7915_REGS_H
 
+/* MCU WFDMA0 */
+#define MT_MCU_WFDMA0_BASE		0x2000
+#define MT_MCU_WFDMA0(ofs)		(MT_MCU_WFDMA0_BASE + (ofs))
+#define MT_MCU_WFDMA0_DUMMY_CR		MT_MCU_WFDMA0(0x120)
+
 /* MCU WFDMA1 */
 #define MT_MCU_WFDMA1_BASE		0x3000
 #define MT_MCU_WFDMA1(ofs)		(MT_MCU_WFDMA1_BASE + (ofs))
@@ -396,6 +401,14 @@
 #define MT_WFDMA1_PCIE1_BUSY_ENA_TX_FIFO1	BIT(1)
 #define MT_WFDMA1_PCIE1_BUSY_ENA_RX_FIFO	BIT(2)
 
+#define MT_TOP_RGU_BASE				0xf0000
+#define MT_TOP_PWR_CTRL				(MT_TOP_RGU_BASE + (0x0))
+#define MT_TOP_PWR_KEY				(0x5746 << 16)
+#define MT_TOP_PWR_SW_RST			BIT(0)
+#define MT_TOP_PWR_SW_PWR_ON			GENMASK(3, 2)
+#define MT_TOP_PWR_HW_CTRL			BIT(4)
+#define MT_TOP_PWR_PWR_ON			BIT(7)
+
 #define MT_INFRA_CFG_BASE		0xf1000
 #define MT_INFRA(ofs)			(MT_INFRA_CFG_BASE + (ofs))
 
-- 
2.30.2

[PATCH AUTOSEL 5.12 069/116] iwlwifi: pcie: make cfg vs. trans_cfg more robust

[Sasha Levin]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit 48a5494d6a4cb5812f0640d9515f1876ffc7a013 ]

If we (for example) have a trans_cfg entry in the PCI IDs table,
but then don't find a full cfg entry for it in the info table,
we fall through to the code that treats the PCI ID table entry
as a full cfg entry. This obviously causes crashes later, e.g.
when trying to build the firmware name string.

Avoid such crashes by using the low bit of the pointer as a tag
for trans_cfg entries (automatically using a macro that checks
the type when assigning) and then checking that before trying to
use the data as a full entry - if it's just a partial entry at
that point, fail.

Since we're adding some macro magic, also check that the type is
in fact either struct iwl_cfg_trans_params or struct iwl_cfg,
failing compilation ("initializer element is not constant") if
it isn't.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210330162204.6f69fe6e4128.I921d4ae20ef5276716baeeeda0b001cf25b9b968@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/intel/iwlwifi/pcie/drv.c | 35 +++++++++++++++----
 1 file changed, 28 insertions(+), 7 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/drv.c b/drivers/net/wireless/intel/iwlwifi/pcie/drv.c
index 558a0b2ef0fc..6f4db04ead4a 100644
--- a/drivers/net/wireless/intel/iwlwifi/pcie/drv.c
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/drv.c
@@ -17,10 +17,20 @@
 #include "iwl-prph.h"
 #include "internal.h"
 
+#define TRANS_CFG_MARKER BIT(0)
+#define _IS_A(cfg, _struct) __builtin_types_compatible_p(typeof(cfg),	\
+							 struct _struct)
+extern int _invalid_type;
+#define _TRANS_CFG_MARKER(cfg)						\
+	(__builtin_choose_expr(_IS_A(cfg, iwl_cfg_trans_params),	\
+			       TRANS_CFG_MARKER,			\
+	 __builtin_choose_expr(_IS_A(cfg, iwl_cfg), 0, _invalid_type)))
+#define _ASSIGN_CFG(cfg) (_TRANS_CFG_MARKER(cfg) + (kernel_ulong_t)&(cfg))
+
 #define IWL_PCI_DEVICE(dev, subdev, cfg) \
 	.vendor = PCI_VENDOR_ID_INTEL,  .device = (dev), \
 	.subvendor = PCI_ANY_ID, .subdevice = (subdev), \
-	.driver_data = (kernel_ulong_t)&(cfg)
+	.driver_data = _ASSIGN_CFG(cfg)
 
 /* Hardware specific file defines the PCI IDs table for that hardware module */
 static const struct pci_device_id iwl_hw_card_ids[] = {
@@ -1075,19 +1085,22 @@ static const struct iwl_dev_info iwl_dev_info_table[] = {
 
 static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
-	const struct iwl_cfg_trans_params *trans =
-		(struct iwl_cfg_trans_params *)(ent->driver_data);
+	const struct iwl_cfg_trans_params *trans;
 	const struct iwl_cfg *cfg_7265d __maybe_unused = NULL;
 	struct iwl_trans *iwl_trans;
 	struct iwl_trans_pcie *trans_pcie;
 	int i, ret;
+	const struct iwl_cfg *cfg;
+
+	trans = (void *)(ent->driver_data & ~TRANS_CFG_MARKER);
+
 	/*
 	 * This is needed for backwards compatibility with the old
 	 * tables, so we don't need to change all the config structs
 	 * at the same time.  The cfg is used to compare with the old
 	 * full cfg structs.
 	 */
-	const struct iwl_cfg *cfg = (struct iwl_cfg *)(ent->driver_data);
+	cfg = (void *)(ent->driver_data & ~TRANS_CFG_MARKER);
 
 	/* make sure trans is the first element in iwl_cfg */
 	BUILD_BUG_ON(offsetof(struct iwl_cfg, trans));
@@ -1202,11 +1215,19 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 #endif
 	/*
-	 * If we didn't set the cfg yet, assume the trans is actually
-	 * a full cfg from the old tables.
+	 * If we didn't set the cfg yet, the PCI ID table entry should have
+	 * been a full config - if yes, use it, otherwise fail.
 	 */
-	if (!iwl_trans->cfg)
+	if (!iwl_trans->cfg) {
+		if (ent->driver_data & TRANS_CFG_MARKER) {
+			pr_err("No config found for PCI dev %04x/%04x, rev=0x%x, rfid=0x%x\n",
+			       pdev->device, pdev->subsystem_device,
+			       iwl_trans->hw_rev, iwl_trans->hw_rf_id);
+			ret = -EINVAL;
+			goto out_free_trans;
+		}
 		iwl_trans->cfg = cfg;
+	}
 
 	/* if we don't have a name yet, copy name from the old cfg */
 	if (!iwl_trans->name)
-- 
2.30.2

[PATCH AUTOSEL 5.12 070/116] iwlwifi: queue: avoid memory leak in reset flow

[Sasha Levin]

From: Mordechay Goodstein <mordechay.goodstein@intel.com>

[ Upstream commit 4cf2f5904d971a461f67825434ae3c31900ff84b ]

In case the device is stopped any usage of hw queues needs to be
reallocated in fw due to fw reset after device stop, so all driver
internal queue should also be freed, and if we don't free the next usage
would leak the old memory and get in recover flows
"iwlwifi 0000:00:03.0: dma_pool_destroy iwlwifi:bc" warning.

Also warn about trying to reuse an internal allocated queue.

Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210411124417.c72d2f0355c4.Ia3baff633b9b9109f88ab379ef0303aa152c16bf@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../wireless/intel/iwlwifi/pcie/trans-gen2.c  |  4 +--
 drivers/net/wireless/intel/iwlwifi/queue/tx.c | 30 ++++---------------
 drivers/net/wireless/intel/iwlwifi/queue/tx.h |  3 +-
 3 files changed, 9 insertions(+), 28 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/trans-gen2.c b/drivers/net/wireless/intel/iwlwifi/pcie/trans-gen2.c
index 94ffc1ae484d..af9412bd697e 100644
--- a/drivers/net/wireless/intel/iwlwifi/pcie/trans-gen2.c
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/trans-gen2.c
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
 /*
  * Copyright (C) 2017 Intel Deutschland GmbH
- * Copyright (C) 2018-2020 Intel Corporation
+ * Copyright (C) 2018-2021 Intel Corporation
  */
 #include "iwl-trans.h"
 #include "iwl-prph.h"
@@ -143,7 +143,7 @@ void _iwl_trans_pcie_gen2_stop_device(struct iwl_trans *trans)
 	if (test_and_clear_bit(STATUS_DEVICE_ENABLED, &trans->status)) {
 		IWL_DEBUG_INFO(trans,
 			       "DEVICE_ENABLED bit was set and is now cleared\n");
-		iwl_txq_gen2_tx_stop(trans);
+		iwl_txq_gen2_tx_free(trans);
 		iwl_pcie_rx_stop(trans);
 	}
 
diff --git a/drivers/net/wireless/intel/iwlwifi/queue/tx.c b/drivers/net/wireless/intel/iwlwifi/queue/tx.c
index 833f43d1ca7a..810dcb3df242 100644
--- a/drivers/net/wireless/intel/iwlwifi/queue/tx.c
+++ b/drivers/net/wireless/intel/iwlwifi/queue/tx.c
@@ -13,30 +13,6 @@
 #include "iwl-scd.h"
 #include <linux/dmapool.h>
 
-/*
- * iwl_txq_gen2_tx_stop - Stop all Tx DMA channels
- */
-void iwl_txq_gen2_tx_stop(struct iwl_trans *trans)
-{
-	int txq_id;
-
-	/*
-	 * This function can be called before the op_mode disabled the
-	 * queues. This happens when we have an rfkill interrupt.
-	 * Since we stop Tx altogether - mark the queues as stopped.
-	 */
-	memset(trans->txqs.queue_stopped, 0,
-	       sizeof(trans->txqs.queue_stopped));
-	memset(trans->txqs.queue_used, 0, sizeof(trans->txqs.queue_used));
-
-	/* Unmap DMA from host system and free skb's */
-	for (txq_id = 0; txq_id < ARRAY_SIZE(trans->txqs.txq); txq_id++) {
-		if (!trans->txqs.txq[txq_id])
-			continue;
-		iwl_txq_gen2_unmap(trans, txq_id);
-	}
-}
-
 /*
  * iwl_txq_update_byte_tbl - Set up entry in Tx byte-count array
  */
@@ -1189,6 +1165,12 @@ static int iwl_txq_alloc_response(struct iwl_trans *trans, struct iwl_txq *txq,
 		goto error_free_resp;
 	}
 
+	if (WARN_ONCE(trans->txqs.txq[qid],
+		      "queue %d already allocated\n", qid)) {
+		ret = -EIO;
+		goto error_free_resp;
+	}
+
 	txq->id = qid;
 	trans->txqs.txq[qid] = txq;
 	wr_ptr &= (trans->trans_cfg->base_params->max_tfd_queue_size - 1);
diff --git a/drivers/net/wireless/intel/iwlwifi/queue/tx.h b/drivers/net/wireless/intel/iwlwifi/queue/tx.h
index af1dbdf5617a..20efc62acf13 100644
--- a/drivers/net/wireless/intel/iwlwifi/queue/tx.h
+++ b/drivers/net/wireless/intel/iwlwifi/queue/tx.h
@@ -1,6 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
 /*
- * Copyright (C) 2020 Intel Corporation
+ * Copyright (C) 2020-2021 Intel Corporation
  */
 #ifndef __iwl_trans_queue_tx_h__
 #define __iwl_trans_queue_tx_h__
@@ -123,7 +123,6 @@ int iwl_txq_gen2_tx(struct iwl_trans *trans, struct sk_buff *skb,
 void iwl_txq_dyn_free(struct iwl_trans *trans, int queue);
 void iwl_txq_gen2_free_tfd(struct iwl_trans *trans, struct iwl_txq *txq);
 void iwl_txq_inc_wr_ptr(struct iwl_trans *trans, struct iwl_txq *txq);
-void iwl_txq_gen2_tx_stop(struct iwl_trans *trans);
 void iwl_txq_gen2_tx_free(struct iwl_trans *trans);
 int iwl_txq_init(struct iwl_trans *trans, struct iwl_txq *txq, int slots_num,
 		 bool cmd_queue);
-- 
2.30.2

[PATCH AUTOSEL 5.12 071/116] iwlwifi: trans/pcie: defer transport initialisation

[Sasha Levin]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit d12455fdbfe9430affd88bfbfee51777356667a0 ]

In a few PCIe devices we may have to swap out the configuration
after we allocate/initialise some parts of the device because
we only know the correct one after reading some registers. This
causes some things such as the byte-count table allocations to
be incorrect, since the configuration is swapped for one with a
bigger queue size.

Fix this by initialising most of the transport much later, only
after the configuration has finally been determined.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210411132130.8f5db97db1e4.Ic622da559b586a04ca536a0ec49ed5ecf03a9354@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/wireless/intel/iwlwifi/iwl-trans.c    | 91 +++++++++++--------
 .../net/wireless/intel/iwlwifi/iwl-trans.h    |  1 +
 drivers/net/wireless/intel/iwlwifi/pcie/drv.c |  4 +
 3 files changed, 57 insertions(+), 39 deletions(-)

diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-trans.c b/drivers/net/wireless/intel/iwlwifi/iwl-trans.c
index 60e0db4a5e20..9236f9106826 100644
--- a/drivers/net/wireless/intel/iwlwifi/iwl-trans.c
+++ b/drivers/net/wireless/intel/iwlwifi/iwl-trans.c
@@ -2,7 +2,7 @@
 /*
  * Copyright (C) 2015 Intel Mobile Communications GmbH
  * Copyright (C) 2016-2017 Intel Deutschland GmbH
- * Copyright (C) 2019-2020 Intel Corporation
+ * Copyright (C) 2019-2021 Intel Corporation
  */
 #include <linux/kernel.h>
 #include <linux/bsearch.h>
@@ -21,7 +21,6 @@ struct iwl_trans *iwl_trans_alloc(unsigned int priv_size,
 				  const struct iwl_cfg_trans_params *cfg_trans)
 {
 	struct iwl_trans *trans;
-	int txcmd_size, txcmd_align;
 #ifdef CONFIG_LOCKDEP
 	static struct lock_class_key __key;
 #endif
@@ -31,10 +30,40 @@ struct iwl_trans *iwl_trans_alloc(unsigned int priv_size,
 		return NULL;
 
 	trans->trans_cfg = cfg_trans;
-	if (!cfg_trans->gen2) {
+
+#ifdef CONFIG_LOCKDEP
+	lockdep_init_map(&trans->sync_cmd_lockdep_map, "sync_cmd_lockdep_map",
+			 &__key, 0);
+#endif
+
+	trans->dev = dev;
+	trans->ops = ops;
+	trans->num_rx_queues = 1;
+
+	WARN_ON(!ops->wait_txq_empty && !ops->wait_tx_queues_empty);
+
+	if (trans->trans_cfg->use_tfh) {
+		trans->txqs.tfd.addr_size = 64;
+		trans->txqs.tfd.max_tbs = IWL_TFH_NUM_TBS;
+		trans->txqs.tfd.size = sizeof(struct iwl_tfh_tfd);
+	} else {
+		trans->txqs.tfd.addr_size = 36;
+		trans->txqs.tfd.max_tbs = IWL_NUM_OF_TBS;
+		trans->txqs.tfd.size = sizeof(struct iwl_tfd);
+	}
+	trans->max_skb_frags = IWL_TRANS_MAX_FRAGS(trans);
+
+	return trans;
+}
+
+int iwl_trans_init(struct iwl_trans *trans)
+{
+	int txcmd_size, txcmd_align;
+
+	if (!trans->trans_cfg->gen2) {
 		txcmd_size = sizeof(struct iwl_tx_cmd);
 		txcmd_align = sizeof(void *);
-	} else if (cfg_trans->device_family < IWL_DEVICE_FAMILY_AX210) {
+	} else if (trans->trans_cfg->device_family < IWL_DEVICE_FAMILY_AX210) {
 		txcmd_size = sizeof(struct iwl_tx_cmd_gen2);
 		txcmd_align = 64;
 	} else {
@@ -46,17 +75,8 @@ struct iwl_trans *iwl_trans_alloc(unsigned int priv_size,
 	txcmd_size += 36; /* biggest possible 802.11 header */
 
 	/* Ensure device TX cmd cannot reach/cross a page boundary in gen2 */
-	if (WARN_ON(cfg_trans->gen2 && txcmd_size >= txcmd_align))
-		return ERR_PTR(-EINVAL);
-
-#ifdef CONFIG_LOCKDEP
-	lockdep_init_map(&trans->sync_cmd_lockdep_map, "sync_cmd_lockdep_map",
-			 &__key, 0);
-#endif
-
-	trans->dev = dev;
-	trans->ops = ops;
-	trans->num_rx_queues = 1;
+	if (WARN_ON(trans->trans_cfg->gen2 && txcmd_size >= txcmd_align))
+		return -EINVAL;
 
 	if (trans->trans_cfg->device_family >= IWL_DEVICE_FAMILY_AX210)
 		trans->txqs.bc_tbl_size = sizeof(struct iwl_gen3_bc_tbl);
@@ -68,23 +88,16 @@ struct iwl_trans *iwl_trans_alloc(unsigned int priv_size,
 	 * allocate here.
 	 */
 	if (trans->trans_cfg->gen2) {
-		trans->txqs.bc_pool = dmam_pool_create("iwlwifi:bc", dev,
+		trans->txqs.bc_pool = dmam_pool_create("iwlwifi:bc", trans->dev,
 						       trans->txqs.bc_tbl_size,
 						       256, 0);
 		if (!trans->txqs.bc_pool)
-			return NULL;
+			return -ENOMEM;
 	}
 
-	if (trans->trans_cfg->use_tfh) {
-		trans->txqs.tfd.addr_size = 64;
-		trans->txqs.tfd.max_tbs = IWL_TFH_NUM_TBS;
-		trans->txqs.tfd.size = sizeof(struct iwl_tfh_tfd);
-	} else {
-		trans->txqs.tfd.addr_size = 36;
-		trans->txqs.tfd.max_tbs = IWL_NUM_OF_TBS;
-		trans->txqs.tfd.size = sizeof(struct iwl_tfd);
-	}
-	trans->max_skb_frags = IWL_TRANS_MAX_FRAGS(trans);
+	/* Some things must not change even if the config does */
+	WARN_ON(trans->txqs.tfd.addr_size !=
+		(trans->trans_cfg->use_tfh ? 64 : 36));
 
 	snprintf(trans->dev_cmd_pool_name, sizeof(trans->dev_cmd_pool_name),
 		 "iwl_cmd_pool:%s", dev_name(trans->dev));
@@ -93,35 +106,35 @@ struct iwl_trans *iwl_trans_alloc(unsigned int priv_size,
 				  txcmd_size, txcmd_align,
 				  SLAB_HWCACHE_ALIGN, NULL);
 	if (!trans->dev_cmd_pool)
-		return NULL;
-
-	WARN_ON(!ops->wait_txq_empty && !ops->wait_tx_queues_empty);
+		return -ENOMEM;
 
 	trans->txqs.tso_hdr_page = alloc_percpu(struct iwl_tso_hdr_page);
 	if (!trans->txqs.tso_hdr_page) {
 		kmem_cache_destroy(trans->dev_cmd_pool);
-		return NULL;
+		return -ENOMEM;
 	}
 
 	/* Initialize the wait queue for commands */
 	init_waitqueue_head(&trans->wait_command_queue);
 
-	return trans;
+	return 0;
 }
 
 void iwl_trans_free(struct iwl_trans *trans)
 {
 	int i;
 
-	for_each_possible_cpu(i) {
-		struct iwl_tso_hdr_page *p =
-			per_cpu_ptr(trans->txqs.tso_hdr_page, i);
+	if (trans->txqs.tso_hdr_page) {
+		for_each_possible_cpu(i) {
+			struct iwl_tso_hdr_page *p =
+				per_cpu_ptr(trans->txqs.tso_hdr_page, i);
 
-		if (p->page)
-			__free_page(p->page);
-	}
+			if (p && p->page)
+				__free_page(p->page);
+		}
 
-	free_percpu(trans->txqs.tso_hdr_page);
+		free_percpu(trans->txqs.tso_hdr_page);
+	}
 
 	kmem_cache_destroy(trans->dev_cmd_pool);
 }
diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-trans.h b/drivers/net/wireless/intel/iwlwifi/iwl-trans.h
index 4a5822c1be13..3e0df6fbb642 100644
--- a/drivers/net/wireless/intel/iwlwifi/iwl-trans.h
+++ b/drivers/net/wireless/intel/iwlwifi/iwl-trans.h
@@ -1438,6 +1438,7 @@ struct iwl_trans *iwl_trans_alloc(unsigned int priv_size,
 			  struct device *dev,
 			  const struct iwl_trans_ops *ops,
 			  const struct iwl_cfg_trans_params *cfg_trans);
+int iwl_trans_init(struct iwl_trans *trans);
 void iwl_trans_free(struct iwl_trans *trans);
 
 /*****************************************************
diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/drv.c b/drivers/net/wireless/intel/iwlwifi/pcie/drv.c
index 6f4db04ead4a..66faf7914bd8 100644
--- a/drivers/net/wireless/intel/iwlwifi/pcie/drv.c
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/drv.c
@@ -1243,6 +1243,10 @@ static int iwl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		trans_pcie->num_rx_bufs = RX_QUEUE_SIZE;
 	}
 
+	ret = iwl_trans_init(iwl_trans);
+	if (ret)
+		goto out_free_trans;
+
 	pci_set_drvdata(pdev, iwl_trans);
 	iwl_trans->drv = iwl_drv_start(iwl_trans);
 
-- 
2.30.2

[PATCH AUTOSEL 5.12 088/116] wilc1000: Bring MAC address setting in line with typical Linux behavior

[Sasha Levin]

From: David Mosberger-Tang <davidm@egauge.net>

[ Upstream commit a381b78a1598dde34a6e40dae2842024308a6ef2 ]

Linux network drivers normally disallow changing the MAC address when
the interface is up.  This driver has been different in that it allows
to change the MAC address *only* when it's up.  This patch brings
wilc1000 behavior more in line with other network drivers.  We could
have replaced wilc_set_mac_addr() with eth_mac_addr() but that would
break existing documentation on how to change the MAC address.
Likewise, return -EADDRNOTAVAIL (not -EINVAL) when the specified MAC
address is invalid or unavailable.

Signed-off-by: David Mosberger-Tang <davidm@egauge.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210303194846.1823596-1-davidm@egauge.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../net/wireless/microchip/wilc1000/netdev.c  | 25 ++++++++++++-------
 1 file changed, 16 insertions(+), 9 deletions(-)

diff --git a/drivers/net/wireless/microchip/wilc1000/netdev.c b/drivers/net/wireless/microchip/wilc1000/netdev.c
index 1b205e7d97a8..37f40039e4ca 100644
--- a/drivers/net/wireless/microchip/wilc1000/netdev.c
+++ b/drivers/net/wireless/microchip/wilc1000/netdev.c
@@ -575,7 +575,6 @@ static int wilc_mac_open(struct net_device *ndev)
 {
 	struct wilc_vif *vif = netdev_priv(ndev);
 	struct wilc *wl = vif->wilc;
-	unsigned char mac_add[ETH_ALEN] = {0};
 	int ret = 0;
 	struct mgmt_frame_regs mgmt_regs = {};
 
@@ -598,9 +597,12 @@ static int wilc_mac_open(struct net_device *ndev)
 
 	wilc_set_operation_mode(vif, wilc_get_vif_idx(vif), vif->iftype,
 				vif->idx);
-	wilc_get_mac_address(vif, mac_add);
-	netdev_dbg(ndev, "Mac address: %pM\n", mac_add);
-	ether_addr_copy(ndev->dev_addr, mac_add);
+
+	if (is_valid_ether_addr(ndev->dev_addr))
+		wilc_set_mac_address(vif, ndev->dev_addr);
+	else
+		wilc_get_mac_address(vif, ndev->dev_addr);
+	netdev_dbg(ndev, "Mac address: %pM\n", ndev->dev_addr);
 
 	if (!is_valid_ether_addr(ndev->dev_addr)) {
 		netdev_err(ndev, "Wrong MAC address\n");
@@ -639,7 +641,14 @@ static int wilc_set_mac_addr(struct net_device *dev, void *p)
 	int srcu_idx;
 
 	if (!is_valid_ether_addr(addr->sa_data))
-		return -EINVAL;
+		return -EADDRNOTAVAIL;
+
+	if (!vif->mac_opened) {
+		eth_commit_mac_addr_change(dev, p);
+		return 0;
+	}
+
+	/* Verify MAC Address is not already in use: */
 
 	srcu_idx = srcu_read_lock(&wilc->srcu);
 	list_for_each_entry_rcu(tmp_vif, &wilc->vif_list, list) {
@@ -647,7 +656,7 @@ static int wilc_set_mac_addr(struct net_device *dev, void *p)
 		if (ether_addr_equal(addr->sa_data, mac_addr)) {
 			if (vif != tmp_vif) {
 				srcu_read_unlock(&wilc->srcu, srcu_idx);
-				return -EINVAL;
+				return -EADDRNOTAVAIL;
 			}
 			srcu_read_unlock(&wilc->srcu, srcu_idx);
 			return 0;
@@ -659,9 +668,7 @@ static int wilc_set_mac_addr(struct net_device *dev, void *p)
 	if (result)
 		return result;
 
-	ether_addr_copy(vif->bssid, addr->sa_data);
-	ether_addr_copy(vif->ndev->dev_addr, addr->sa_data);
-
+	eth_commit_mac_addr_change(dev, p);
 	return result;
 }
 
-- 
2.30.2

[PATCH AUTOSEL 5.12 089/116] mac80211: properly drop the connection in case of invalid CSA IE

[Sasha Levin]

From: Emmanuel Grumbach <emmanuel.grumbach@intel.com>

[ Upstream commit 253907ab8bc0818639af382f6398810fa1f022b3 ]

In case the frequency is invalid, ieee80211_parse_ch_switch_ie
will fail and we may not even reach the check in
ieee80211_sta_process_chanswitch. Drop the connection
in case ieee80211_parse_ch_switch_ie failed, but still
take into account the CSA mode to remember not to send
a deauth frame in case if it is forbidden to.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210409123755.34712ef96a0a.I75d7ad7f1d654e8b0aa01cd7189ff00a510512b3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/mlme.c | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 4a8f1b8ce768..0fe91dc9817e 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -1405,11 +1405,8 @@ ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata,
 		ch_switch.delay = csa_ie.max_switch_time;
 	}
 
-	if (res < 0) {
-		ieee80211_queue_work(&local->hw,
-				     &ifmgd->csa_connection_drop_work);
-		return;
-	}
+	if (res < 0)
+		goto lock_and_drop_connection;
 
 	if (beacon && sdata->vif.csa_active && !ifmgd->csa_waiting_bcn) {
 		if (res)
-- 
2.30.2

[PATCH AUTOSEL 5.12 098/116] mt76: mt7615: fix entering driver-own state on mt7663

[Sasha Levin]

From: Felix Fietkau <nbd@nbd.name>

[ Upstream commit 5c7d374444afdeb9dd534a37c4f6c13af032da0c ]

Fixes hardware wakeup issues

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/mediatek/mt76/mt7615/mcu.c | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c
index 4ecbd5406e2a..198e9025b681 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c
@@ -291,12 +291,20 @@ static int mt7615_mcu_drv_pmctrl(struct mt7615_dev *dev)
 	u32 addr;
 	int err;
 
-	addr = is_mt7663(mdev) ? MT_PCIE_DOORBELL_PUSH : MT_CFG_LPCR_HOST;
+	if (is_mt7663(mdev)) {
+		/* Clear firmware own via N9 eint */
+		mt76_wr(dev, MT_PCIE_DOORBELL_PUSH, MT_CFG_LPCR_HOST_DRV_OWN);
+		mt76_poll(dev, MT_CONN_ON_MISC, MT_CFG_LPCR_HOST_FW_OWN, 0, 3000);
+
+		addr = MT_CONN_HIF_ON_LPCTL;
+	} else {
+		addr = MT_CFG_LPCR_HOST;
+	}
+
 	mt76_wr(dev, addr, MT_CFG_LPCR_HOST_DRV_OWN);
 
 	mt7622_trigger_hif_int(dev, true);
 
-	addr = is_mt7663(mdev) ? MT_CONN_HIF_ON_LPCTL : MT_CFG_LPCR_HOST;
 	err = !mt76_poll_msec(dev, addr, MT_CFG_LPCR_HOST_FW_OWN, 0, 3000);
 
 	mt7622_trigger_hif_int(dev, false);
-- 
2.30.2

[PATCH AUTOSEL 5.12 100/116] wl3501_cs: Fix out-of-bounds warnings in wl3501_send_pkt

[Sasha Levin]

From: "Gustavo A. R. Silva" <gustavoars@kernel.org>

[ Upstream commit 820aa37638a252b57967bdf4038a514b1ab85d45 ]

Fix the following out-of-bounds warnings by enclosing structure members
daddr and saddr into new struct addr, in structures wl3501_md_req and
wl3501_md_ind:

arch/x86/include/asm/string_32.h:182:25: warning: '__builtin_memcpy' offset [18, 23] from the object at 'sig' is out of the bounds of referenced subobject 'daddr' with type 'u8[6]' {aka 'unsigned char[6]'} at offset 11 [-Warray-bounds]
arch/x86/include/asm/string_32.h:182:25: warning: '__builtin_memcpy' offset [18, 23] from the object at 'sig' is out of the bounds of referenced subobject 'daddr' with type 'u8[6]' {aka 'unsigned char[6]'} at offset 11 [-Warray-bounds]

Refactor the code, accordingly:

$ pahole -C wl3501_md_req drivers/net/wireless/wl3501_cs.o
struct wl3501_md_req {
	u16                        next_blk;             /*     0     2 */
	u8                         sig_id;               /*     2     1 */
	u8                         routing;              /*     3     1 */
	u16                        data;                 /*     4     2 */
	u16                        size;                 /*     6     2 */
	u8                         pri;                  /*     8     1 */
	u8                         service_class;        /*     9     1 */
	struct {
		u8                 daddr[6];             /*    10     6 */
		u8                 saddr[6];             /*    16     6 */
	} addr;                                          /*    10    12 */

	/* size: 22, cachelines: 1, members: 8 */
	/* last cacheline: 22 bytes */
};

$ pahole -C wl3501_md_ind drivers/net/wireless/wl3501_cs.o
struct wl3501_md_ind {
	u16                        next_blk;             /*     0     2 */
	u8                         sig_id;               /*     2     1 */
	u8                         routing;              /*     3     1 */
	u16                        data;                 /*     4     2 */
	u16                        size;                 /*     6     2 */
	u8                         reception;            /*     8     1 */
	u8                         pri;                  /*     9     1 */
	u8                         service_class;        /*    10     1 */
	struct {
		u8                 daddr[6];             /*    11     6 */
		u8                 saddr[6];             /*    17     6 */
	} addr;                                          /*    11    12 */

	/* size: 24, cachelines: 1, members: 9 */
	/* padding: 1 */
	/* last cacheline: 24 bytes */
};

The problem is that the original code is trying to copy data into a
couple of arrays adjacent to each other in a single call to memcpy().
Now that a new struct _addr_ enclosing those two adjacent arrays
is introduced, memcpy() doesn't overrun the length of &sig.daddr[0]
and &sig.daddr, because the address of the new struct object _addr_
is used, instead.

This helps with the ongoing efforts to globally enable -Warray-bounds
and get us closer to being able to tighten the FORTIFY_SOURCE routines
on memcpy().

Link: https://github.com/KSPP/linux/issues/109
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/d260fe56aed7112bff2be5b4d152d03ad7b78e78.1618442265.git.gustavoars@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/wl3501.h    | 12 ++++++++----
 drivers/net/wireless/wl3501_cs.c | 10 ++++++----
 2 files changed, 14 insertions(+), 8 deletions(-)

diff --git a/drivers/net/wireless/wl3501.h b/drivers/net/wireless/wl3501.h
index e98e04ee9a2c..aa8222cbea68 100644
--- a/drivers/net/wireless/wl3501.h
+++ b/drivers/net/wireless/wl3501.h
@@ -471,8 +471,10 @@ struct wl3501_md_req {
 	u16	size;
 	u8	pri;
 	u8	service_class;
-	u8	daddr[ETH_ALEN];
-	u8	saddr[ETH_ALEN];
+	struct {
+		u8	daddr[ETH_ALEN];
+		u8	saddr[ETH_ALEN];
+	} addr;
 };
 
 struct wl3501_md_ind {
@@ -484,8 +486,10 @@ struct wl3501_md_ind {
 	u8	reception;
 	u8	pri;
 	u8	service_class;
-	u8	daddr[ETH_ALEN];
-	u8	saddr[ETH_ALEN];
+	struct {
+		u8	daddr[ETH_ALEN];
+		u8	saddr[ETH_ALEN];
+	} addr;
 };
 
 struct wl3501_md_confirm {
diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c
index 8ca5789c7b37..70307308635f 100644
--- a/drivers/net/wireless/wl3501_cs.c
+++ b/drivers/net/wireless/wl3501_cs.c
@@ -469,6 +469,7 @@ static int wl3501_send_pkt(struct wl3501_card *this, u8 *data, u16 len)
 	struct wl3501_md_req sig = {
 		.sig_id = WL3501_SIG_MD_REQ,
 	};
+	size_t sig_addr_len = sizeof(sig.addr);
 	u8 *pdata = (char *)data;
 	int rc = -EIO;
 
@@ -484,9 +485,9 @@ static int wl3501_send_pkt(struct wl3501_card *this, u8 *data, u16 len)
 			goto out;
 		}
 		rc = 0;
-		memcpy(&sig.daddr[0], pdata, 12);
-		pktlen = len - 12;
-		pdata += 12;
+		memcpy(&sig.addr, pdata, sig_addr_len);
+		pktlen = len - sig_addr_len;
+		pdata += sig_addr_len;
 		sig.data = bf;
 		if (((*pdata) * 256 + (*(pdata + 1))) > 1500) {
 			u8 addr4[ETH_ALEN] = {
@@ -980,7 +981,8 @@ static inline void wl3501_md_ind_interrupt(struct net_device *dev,
 	} else {
 		skb->dev = dev;
 		skb_reserve(skb, 2); /* IP headers on 16 bytes boundaries */
-		skb_copy_to_linear_data(skb, (unsigned char *)&sig.daddr, 12);
+		skb_copy_to_linear_data(skb, (unsigned char *)&sig.addr,
+					sizeof(sig.addr));
 		wl3501_receive(this, skb->data, pkt_len);
 		skb_put(skb, pkt_len);
 		skb->protocol	= eth_type_trans(skb, dev);
-- 
2.30.2

[PATCH AUTOSEL 5.12 101/116] wl3501_cs: Fix out-of-bounds warnings in wl3501_mgmt_join

[Sasha Levin]

From: "Gustavo A. R. Silva" <gustavoars@kernel.org>

[ Upstream commit bb43e5718d8f1b46e7a77e7b39be3c691f293050 ]

Fix the following out-of-bounds warnings by adding a new structure
wl3501_req instead of duplicating the same members in structure
wl3501_join_req and wl3501_scan_confirm:

arch/x86/include/asm/string_32.h:182:25: warning: '__builtin_memcpy' offset [39, 108] from the object at 'sig' is out of the bounds of referenced subobject 'beacon_period' with type 'short unsigned int' at offset 36 [-Warray-bounds]
arch/x86/include/asm/string_32.h:182:25: warning: '__builtin_memcpy' offset [25, 95] from the object at 'sig' is out of the bounds of referenced subobject 'beacon_period' with type 'short unsigned int' at offset 22 [-Warray-bounds]

Refactor the code, accordingly:

$ pahole -C wl3501_req drivers/net/wireless/wl3501_cs.o
struct wl3501_req {
        u16                        beacon_period;        /*     0     2 */
        u16                        dtim_period;          /*     2     2 */
        u16                        cap_info;             /*     4     2 */
        u8                         bss_type;             /*     6     1 */
        u8                         bssid[6];             /*     7     6 */
        struct iw_mgmt_essid_pset  ssid;                 /*    13    34 */
        struct iw_mgmt_ds_pset     ds_pset;              /*    47     3 */
        struct iw_mgmt_cf_pset     cf_pset;              /*    50     8 */
        struct iw_mgmt_ibss_pset   ibss_pset;            /*    58     4 */
        struct iw_mgmt_data_rset   bss_basic_rset;       /*    62    10 */

        /* size: 72, cachelines: 2, members: 10 */
        /* last cacheline: 8 bytes */
};

$ pahole -C wl3501_join_req drivers/net/wireless/wl3501_cs.o
struct wl3501_join_req {
        u16                        next_blk;             /*     0     2 */
        u8                         sig_id;               /*     2     1 */
        u8                         reserved;             /*     3     1 */
        struct iw_mgmt_data_rset   operational_rset;     /*     4    10 */
        u16                        reserved2;            /*    14     2 */
        u16                        timeout;              /*    16     2 */
        u16                        probe_delay;          /*    18     2 */
        u8                         timestamp[8];         /*    20     8 */
        u8                         local_time[8];        /*    28     8 */
        struct wl3501_req          req;                  /*    36    72 */

        /* size: 108, cachelines: 2, members: 10 */
        /* last cacheline: 44 bytes */
};

$ pahole -C wl3501_scan_confirm drivers/net/wireless/wl3501_cs.o
struct wl3501_scan_confirm {
        u16                        next_blk;             /*     0     2 */
        u8                         sig_id;               /*     2     1 */
        u8                         reserved;             /*     3     1 */
        u16                        status;               /*     4     2 */
        char                       timestamp[8];         /*     6     8 */
        char                       localtime[8];         /*    14     8 */
        struct wl3501_req          req;                  /*    22    72 */
        /* --- cacheline 1 boundary (64 bytes) was 30 bytes ago --- */
        u8                         rssi;                 /*    94     1 */

        /* size: 96, cachelines: 2, members: 8 */
        /* padding: 1 */
        /* last cacheline: 32 bytes */
};

The problem is that the original code is trying to copy data into a
bunch of struct members adjacent to each other in a single call to
memcpy(). Now that a new struct wl3501_req enclosing all those adjacent
members is introduced, memcpy() doesn't overrun the length of
&sig.beacon_period and &this->bss_set[i].beacon_period, because the
address of the new struct object _req_ is used as the destination,
instead.

This helps with the ongoing efforts to globally enable -Warray-bounds
and get us closer to being able to tighten the FORTIFY_SOURCE routines
on memcpy().

Link: https://github.com/KSPP/linux/issues/109
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1fbaf516da763b50edac47d792a9145aa4482e29.1618442265.git.gustavoars@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/wl3501.h    | 35 +++++++++++--------------
 drivers/net/wireless/wl3501_cs.c | 44 +++++++++++++++++---------------
 2 files changed, 38 insertions(+), 41 deletions(-)

diff --git a/drivers/net/wireless/wl3501.h b/drivers/net/wireless/wl3501.h
index aa8222cbea68..59b7b93c5963 100644
--- a/drivers/net/wireless/wl3501.h
+++ b/drivers/net/wireless/wl3501.h
@@ -379,16 +379,7 @@ struct wl3501_get_confirm {
 	u8	mib_value[100];
 };
 
-struct wl3501_join_req {
-	u16			    next_blk;
-	u8			    sig_id;
-	u8			    reserved;
-	struct iw_mgmt_data_rset    operational_rset;
-	u16			    reserved2;
-	u16			    timeout;
-	u16			    probe_delay;
-	u8			    timestamp[8];
-	u8			    local_time[8];
+struct wl3501_req {
 	u16			    beacon_period;
 	u16			    dtim_period;
 	u16			    cap_info;
@@ -401,6 +392,19 @@ struct wl3501_join_req {
 	struct iw_mgmt_data_rset    bss_basic_rset;
 };
 
+struct wl3501_join_req {
+	u16			    next_blk;
+	u8			    sig_id;
+	u8			    reserved;
+	struct iw_mgmt_data_rset    operational_rset;
+	u16			    reserved2;
+	u16			    timeout;
+	u16			    probe_delay;
+	u8			    timestamp[8];
+	u8			    local_time[8];
+	struct wl3501_req	    req;
+};
+
 struct wl3501_join_confirm {
 	u16	next_blk;
 	u8	sig_id;
@@ -443,16 +447,7 @@ struct wl3501_scan_confirm {
 	u16			    status;
 	char			    timestamp[8];
 	char			    localtime[8];
-	u16			    beacon_period;
-	u16			    dtim_period;
-	u16			    cap_info;
-	u8			    bss_type;
-	u8			    bssid[ETH_ALEN];
-	struct iw_mgmt_essid_pset   ssid;
-	struct iw_mgmt_ds_pset	    ds_pset;
-	struct iw_mgmt_cf_pset	    cf_pset;
-	struct iw_mgmt_ibss_pset    ibss_pset;
-	struct iw_mgmt_data_rset    bss_basic_rset;
+	struct wl3501_req	    req;
 	u8			    rssi;
 };
 
diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c
index 70307308635f..672f5d5f3f2c 100644
--- a/drivers/net/wireless/wl3501_cs.c
+++ b/drivers/net/wireless/wl3501_cs.c
@@ -590,7 +590,7 @@ static int wl3501_mgmt_join(struct wl3501_card *this, u16 stas)
 	struct wl3501_join_req sig = {
 		.sig_id		  = WL3501_SIG_JOIN_REQ,
 		.timeout	  = 10,
-		.ds_pset = {
+		.req.ds_pset = {
 			.el = {
 				.id  = IW_MGMT_INFO_ELEMENT_DS_PARAMETER_SET,
 				.len = 1,
@@ -599,7 +599,7 @@ static int wl3501_mgmt_join(struct wl3501_card *this, u16 stas)
 		},
 	};
 
-	memcpy(&sig.beacon_period, &this->bss_set[stas].beacon_period, 72);
+	memcpy(&sig.req, &this->bss_set[stas].req, sizeof(sig.req));
 	return wl3501_esbq_exec(this, &sig, sizeof(sig));
 }
 
@@ -667,35 +667,37 @@ static void wl3501_mgmt_scan_confirm(struct wl3501_card *this, u16 addr)
 	if (sig.status == WL3501_STATUS_SUCCESS) {
 		pr_debug("success");
 		if ((this->net_type == IW_MODE_INFRA &&
-		     (sig.cap_info & WL3501_MGMT_CAPABILITY_ESS)) ||
+		     (sig.req.cap_info & WL3501_MGMT_CAPABILITY_ESS)) ||
 		    (this->net_type == IW_MODE_ADHOC &&
-		     (sig.cap_info & WL3501_MGMT_CAPABILITY_IBSS)) ||
+		     (sig.req.cap_info & WL3501_MGMT_CAPABILITY_IBSS)) ||
 		    this->net_type == IW_MODE_AUTO) {
 			if (!this->essid.el.len)
 				matchflag = 1;
 			else if (this->essid.el.len == 3 &&
 				 !memcmp(this->essid.essid, "ANY", 3))
 				matchflag = 1;
-			else if (this->essid.el.len != sig.ssid.el.len)
+			else if (this->essid.el.len != sig.req.ssid.el.len)
 				matchflag = 0;
-			else if (memcmp(this->essid.essid, sig.ssid.essid,
+			else if (memcmp(this->essid.essid, sig.req.ssid.essid,
 					this->essid.el.len))
 				matchflag = 0;
 			else
 				matchflag = 1;
 			if (matchflag) {
 				for (i = 0; i < this->bss_cnt; i++) {
-					if (ether_addr_equal_unaligned(this->bss_set[i].bssid, sig.bssid)) {
+					if (ether_addr_equal_unaligned(this->bss_set[i].req.bssid,
+								       sig.req.bssid)) {
 						matchflag = 0;
 						break;
 					}
 				}
 			}
 			if (matchflag && (i < 20)) {
-				memcpy(&this->bss_set[i].beacon_period,
-				       &sig.beacon_period, 73);
+				memcpy(&this->bss_set[i].req,
+				       &sig.req, sizeof(sig.req));
 				this->bss_cnt++;
 				this->rssi = sig.rssi;
+				this->bss_set[i].rssi = sig.rssi;
 			}
 		}
 	} else if (sig.status == WL3501_STATUS_TIMEOUT) {
@@ -887,19 +889,19 @@ static void wl3501_mgmt_join_confirm(struct net_device *dev, u16 addr)
 			if (this->join_sta_bss < this->bss_cnt) {
 				const int i = this->join_sta_bss;
 				memcpy(this->bssid,
-				       this->bss_set[i].bssid, ETH_ALEN);
-				this->chan = this->bss_set[i].ds_pset.chan;
+				       this->bss_set[i].req.bssid, ETH_ALEN);
+				this->chan = this->bss_set[i].req.ds_pset.chan;
 				iw_copy_mgmt_info_element(&this->keep_essid.el,
-						     &this->bss_set[i].ssid.el);
+						     &this->bss_set[i].req.ssid.el);
 				wl3501_mgmt_auth(this);
 			}
 		} else {
 			const int i = this->join_sta_bss;
 
-			memcpy(&this->bssid, &this->bss_set[i].bssid, ETH_ALEN);
-			this->chan = this->bss_set[i].ds_pset.chan;
+			memcpy(&this->bssid, &this->bss_set[i].req.bssid, ETH_ALEN);
+			this->chan = this->bss_set[i].req.ds_pset.chan;
 			iw_copy_mgmt_info_element(&this->keep_essid.el,
-						  &this->bss_set[i].ssid.el);
+						  &this->bss_set[i].req.ssid.el);
 			wl3501_online(dev);
 		}
 	} else {
@@ -1573,30 +1575,30 @@ static int wl3501_get_scan(struct net_device *dev, struct iw_request_info *info,
 	for (i = 0; i < this->bss_cnt; ++i) {
 		iwe.cmd			= SIOCGIWAP;
 		iwe.u.ap_addr.sa_family = ARPHRD_ETHER;
-		memcpy(iwe.u.ap_addr.sa_data, this->bss_set[i].bssid, ETH_ALEN);
+		memcpy(iwe.u.ap_addr.sa_data, this->bss_set[i].req.bssid, ETH_ALEN);
 		current_ev = iwe_stream_add_event(info, current_ev,
 						  extra + IW_SCAN_MAX_DATA,
 						  &iwe, IW_EV_ADDR_LEN);
 		iwe.cmd		  = SIOCGIWESSID;
 		iwe.u.data.flags  = 1;
-		iwe.u.data.length = this->bss_set[i].ssid.el.len;
+		iwe.u.data.length = this->bss_set[i].req.ssid.el.len;
 		current_ev = iwe_stream_add_point(info, current_ev,
 						  extra + IW_SCAN_MAX_DATA,
 						  &iwe,
-						  this->bss_set[i].ssid.essid);
+						  this->bss_set[i].req.ssid.essid);
 		iwe.cmd	   = SIOCGIWMODE;
-		iwe.u.mode = this->bss_set[i].bss_type;
+		iwe.u.mode = this->bss_set[i].req.bss_type;
 		current_ev = iwe_stream_add_event(info, current_ev,
 						  extra + IW_SCAN_MAX_DATA,
 						  &iwe, IW_EV_UINT_LEN);
 		iwe.cmd = SIOCGIWFREQ;
-		iwe.u.freq.m = this->bss_set[i].ds_pset.chan;
+		iwe.u.freq.m = this->bss_set[i].req.ds_pset.chan;
 		iwe.u.freq.e = 0;
 		current_ev = iwe_stream_add_event(info, current_ev,
 						  extra + IW_SCAN_MAX_DATA,
 						  &iwe, IW_EV_FREQ_LEN);
 		iwe.cmd = SIOCGIWENCODE;
-		if (this->bss_set[i].cap_info & WL3501_MGMT_CAPABILITY_PRIVACY)
+		if (this->bss_set[i].req.cap_info & WL3501_MGMT_CAPABILITY_PRIVACY)
 			iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY;
 		else
 			iwe.u.data.flags = IW_ENCODE_DISABLED;
-- 
2.30.2

[PATCH AUTOSEL 5.12 102/116] qtnfmac: Fix possible buffer overflow in qtnf_event_handle_external_auth

[Sasha Levin]

From: Lee Gibson <leegib@gmail.com>

[ Upstream commit 130f634da1af649205f4a3dd86cbe5c126b57914 ]

Function qtnf_event_handle_external_auth calls memcpy without
checking the length.
A user could control that length and trigger a buffer overflow.
Fix by checking the length is within the maximum allowed size.

Signed-off-by: Lee Gibson <leegib@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210419145842.345787-1-leegib@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/quantenna/qtnfmac/event.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/quantenna/qtnfmac/event.c b/drivers/net/wireless/quantenna/qtnfmac/event.c
index c775c177933b..8dc80574d08d 100644
--- a/drivers/net/wireless/quantenna/qtnfmac/event.c
+++ b/drivers/net/wireless/quantenna/qtnfmac/event.c
@@ -570,8 +570,10 @@ qtnf_event_handle_external_auth(struct qtnf_vif *vif,
 		return 0;
 
 	if (ev->ssid_len) {
-		memcpy(auth.ssid.ssid, ev->ssid, ev->ssid_len);
-		auth.ssid.ssid_len = ev->ssid_len;
+		int len = clamp_val(ev->ssid_len, 0, IEEE80211_MAX_SSID_LEN);
+
+		memcpy(auth.ssid.ssid, ev->ssid, len);
+		auth.ssid.ssid_len = len;
 	}
 
 	auth.key_mgmt_suite = le32_to_cpu(ev->akm_suite);
-- 
2.30.2